Merge tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for a few reported issues. Included in
here are:
- xhci fix for a _much_ reported regression. I don't think there's a
community distro that has not reported this problem yet :(
- new USB quirk addition
- cdns3 minor fixes
- typec regression fix.
All of these have been in linux-next with no reported problems, and
the xhci fix has been reported by many to resolve their reported
problem"
* tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()
usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
xhci: Fix commad ring abort, write all 64 bits to CRCR register.
diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c
index 1f3b4a1..f9af7eb 100644
--- a/drivers/usb/cdns3/cdns3-gadget.c
+++ b/drivers/usb/cdns3/cdns3-gadget.c
@@ -337,19 +337,6 @@
cdns3_ep_inc_trb(&priv_ep->dequeue, &priv_ep->ccs, priv_ep->num_trbs);
}
-static void cdns3_move_deq_to_next_trb(struct cdns3_request *priv_req)
-{
- struct cdns3_endpoint *priv_ep = priv_req->priv_ep;
- int current_trb = priv_req->start_trb;
-
- while (current_trb != priv_req->end_trb) {
- cdns3_ep_inc_deq(priv_ep);
- current_trb = priv_ep->dequeue;
- }
-
- cdns3_ep_inc_deq(priv_ep);
-}
-
/**
* cdns3_allow_enable_l1 - enable/disable permits to transition to L1.
* @priv_dev: Extended gadget object
@@ -1517,10 +1504,11 @@
trb = priv_ep->trb_pool + priv_ep->dequeue;
- /* Request was dequeued and TRB was changed to TRB_LINK. */
- if (TRB_FIELD_TO_TYPE(le32_to_cpu(trb->control)) == TRB_LINK) {
+ /* The TRB was changed as link TRB, and the request was handled at ep_dequeue */
+ while (TRB_FIELD_TO_TYPE(le32_to_cpu(trb->control)) == TRB_LINK) {
trace_cdns3_complete_trb(priv_ep, trb);
- cdns3_move_deq_to_next_trb(priv_req);
+ cdns3_ep_inc_deq(priv_ep);
+ trb = priv_ep->trb_pool + priv_ep->dequeue;
}
if (!request->stream_id) {
diff --git a/drivers/usb/cdns3/cdnsp-mem.c b/drivers/usb/cdns3/cdnsp-mem.c
index ad9aee3..97866bf 100644
--- a/drivers/usb/cdns3/cdnsp-mem.c
+++ b/drivers/usb/cdns3/cdnsp-mem.c
@@ -987,6 +987,9 @@
/* Set up the endpoint ring. */
pep->ring = cdnsp_ring_alloc(pdev, 2, ring_type, max_packet, mem_flags);
+ if (!pep->ring)
+ return -ENOMEM;
+
pep->skip = false;
/* Fill the endpoint context */
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 311597b..eaa49ae 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -366,7 +366,9 @@
/* Must be called with xhci->lock held, releases and aquires lock back */
static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
{
- u32 temp_32;
+ struct xhci_segment *new_seg = xhci->cmd_ring->deq_seg;
+ union xhci_trb *new_deq = xhci->cmd_ring->dequeue;
+ u64 crcr;
int ret;
xhci_dbg(xhci, "Abort command ring\n");
@@ -375,13 +377,18 @@
/*
* The control bits like command stop, abort are located in lower
- * dword of the command ring control register. Limit the write
- * to the lower dword to avoid corrupting the command ring pointer
- * in case if the command ring is stopped by the time upper dword
- * is written.
+ * dword of the command ring control register.
+ * Some controllers require all 64 bits to be written to abort the ring.
+ * Make sure the upper dword is valid, pointing to the next command,
+ * avoiding corrupting the command ring pointer in case the command ring
+ * is stopped by the time the upper dword is written.
*/
- temp_32 = readl(&xhci->op_regs->cmd_ring);
- writel(temp_32 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
+ next_trb(xhci, NULL, &new_seg, &new_deq);
+ if (trb_is_link(new_deq))
+ next_trb(xhci, NULL, &new_seg, &new_deq);
+
+ crcr = xhci_trb_virt_to_dma(new_seg, new_deq);
+ xhci_write_64(xhci, crcr | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
* completion of the Command Abort operation. If CRR is not negated in 5
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 7f2f3ff..6010b99 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -4110,11 +4110,7 @@
tcpm_try_src(port) ? SRC_TRY
: SNK_ATTACHED,
0);
- else
- /* Wait for VBUS, but not forever */
- tcpm_set_state(port, PORT_RESET, PD_T_PS_SOURCE_ON);
break;
-
case SRC_TRY:
port->try_src_count++;
tcpm_set_cc(port, tcpm_rp_cc(port));
