| // SPDX-License-Identifier: GPL-2.0-only |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #define DPRINTK(fmt, ...) \ |
| pr_debug("(%s:%d) " fmt "\n", \ |
| __func__, __LINE__, ##__VA_ARGS__) |
| |
| #include <linux/kernel.h> |
| #include <linux/err.h> |
| #include <linux/string.h> |
| #include <linux/ctype.h> |
| #include <linux/fcntl.h> |
| #include <linux/mm.h> |
| #include <linux/proc_fs.h> |
| #include <linux/notifier.h> |
| #include <linux/kthread.h> |
| #include <linux/mutex.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| |
| #include <asm/page.h> |
| #include <asm/xen/hypervisor.h> |
| #include <xen/xenbus.h> |
| #include <xen/events.h> |
| #include <xen/page.h> |
| #include <xen/xen.h> |
| |
| #include <xen/platform_pci.h> |
| |
| #include "xenbus.h" |
| |
| |
| |
| /* device/<type>/<id> => <type>-<id> */ |
| static int frontend_bus_id(char bus_id[XEN_BUS_ID_SIZE], const char *nodename) |
| { |
| nodename = strchr(nodename, '/'); |
| if (!nodename || strlen(nodename + 1) >= XEN_BUS_ID_SIZE) { |
| pr_warn("bad frontend %s\n", nodename); |
| return -EINVAL; |
| } |
| |
| strlcpy(bus_id, nodename + 1, XEN_BUS_ID_SIZE); |
| if (!strchr(bus_id, '/')) { |
| pr_warn("bus_id %s no slash\n", bus_id); |
| return -EINVAL; |
| } |
| *strchr(bus_id, '/') = '-'; |
| return 0; |
| } |
| |
| /* device/<typename>/<name> */ |
| static int xenbus_probe_frontend(struct xen_bus_type *bus, const char *type, |
| const char *name) |
| { |
| char *nodename; |
| int err; |
| |
| /* ignore console/0 */ |
| if (!strncmp(type, "console", 7) && !strncmp(name, "0", 1)) { |
| DPRINTK("Ignoring buggy device entry console/0"); |
| return 0; |
| } |
| |
| nodename = kasprintf(GFP_KERNEL, "%s/%s/%s", bus->root, type, name); |
| if (!nodename) |
| return -ENOMEM; |
| |
| DPRINTK("%s", nodename); |
| |
| err = xenbus_probe_node(bus, type, nodename); |
| kfree(nodename); |
| return err; |
| } |
| |
| static int xenbus_uevent_frontend(struct device *_dev, |
| struct kobj_uevent_env *env) |
| { |
| struct xenbus_device *dev = to_xenbus_device(_dev); |
| |
| if (add_uevent_var(env, "MODALIAS=xen:%s", dev->devicetype)) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| |
| static void backend_changed(struct xenbus_watch *watch, |
| const char *path, const char *token) |
| { |
| xenbus_otherend_changed(watch, path, token, 1); |
| } |
| |
| static void xenbus_frontend_delayed_resume(struct work_struct *w) |
| { |
| struct xenbus_device *xdev = container_of(w, struct xenbus_device, work); |
| |
| xenbus_dev_resume(&xdev->dev); |
| } |
| |
| static int xenbus_frontend_dev_resume(struct device *dev) |
| { |
| /* |
| * If xenstored is running in this domain, we cannot access the backend |
| * state at the moment, so we need to defer xenbus_dev_resume |
| */ |
| if (xen_store_domain_type == XS_LOCAL) { |
| struct xenbus_device *xdev = to_xenbus_device(dev); |
| |
| schedule_work(&xdev->work); |
| |
| return 0; |
| } |
| |
| return xenbus_dev_resume(dev); |
| } |
| |
| static int xenbus_frontend_dev_probe(struct device *dev) |
| { |
| if (xen_store_domain_type == XS_LOCAL) { |
| struct xenbus_device *xdev = to_xenbus_device(dev); |
| INIT_WORK(&xdev->work, xenbus_frontend_delayed_resume); |
| } |
| |
| return xenbus_dev_probe(dev); |
| } |
| |
| static void xenbus_frontend_dev_shutdown(struct device *_dev) |
| { |
| struct xenbus_device *dev = to_xenbus_device(_dev); |
| unsigned long timeout = 5*HZ; |
| |
| DPRINTK("%s", dev->nodename); |
| |
| get_device(&dev->dev); |
| if (dev->state != XenbusStateConnected) { |
| pr_info("%s: %s: %s != Connected, skipping\n", |
| __func__, dev->nodename, xenbus_strstate(dev->state)); |
| goto out; |
| } |
| xenbus_switch_state(dev, XenbusStateClosing); |
| timeout = wait_for_completion_timeout(&dev->down, timeout); |
| if (!timeout) |
| pr_info("%s: %s timeout closing device\n", |
| __func__, dev->nodename); |
| out: |
| put_device(&dev->dev); |
| } |
| |
| static const struct dev_pm_ops xenbus_pm_ops = { |
| .suspend = xenbus_dev_suspend, |
| .resume = xenbus_frontend_dev_resume, |
| .freeze = xenbus_dev_suspend, |
| .thaw = xenbus_dev_cancel, |
| .restore = xenbus_dev_resume, |
| }; |
| |
| static struct xen_bus_type xenbus_frontend = { |
| .root = "device", |
| .levels = 2, /* device/type/<id> */ |
| .get_bus_id = frontend_bus_id, |
| .probe = xenbus_probe_frontend, |
| .otherend_changed = backend_changed, |
| .bus = { |
| .name = "xen", |
| .match = xenbus_match, |
| .uevent = xenbus_uevent_frontend, |
| .probe = xenbus_frontend_dev_probe, |
| .remove = xenbus_dev_remove, |
| .shutdown = xenbus_frontend_dev_shutdown, |
| .dev_groups = xenbus_dev_groups, |
| |
| .pm = &xenbus_pm_ops, |
| }, |
| }; |
| |
| static void frontend_changed(struct xenbus_watch *watch, |
| const char *path, const char *token) |
| { |
| DPRINTK(""); |
| |
| xenbus_dev_changed(path, &xenbus_frontend); |
| } |
| |
| |
| /* We watch for devices appearing and vanishing. */ |
| static struct xenbus_watch fe_watch = { |
| .node = "device", |
| .callback = frontend_changed, |
| }; |
| |
| static int read_backend_details(struct xenbus_device *xendev) |
| { |
| return xenbus_read_otherend_details(xendev, "backend-id", "backend"); |
| } |
| |
| static int is_device_connecting(struct device *dev, void *data, bool ignore_nonessential) |
| { |
| struct xenbus_device *xendev = to_xenbus_device(dev); |
| struct device_driver *drv = data; |
| struct xenbus_driver *xendrv; |
| |
| /* |
| * A device with no driver will never connect. We care only about |
| * devices which should currently be in the process of connecting. |
| */ |
| if (!dev->driver) |
| return 0; |
| |
| /* Is this search limited to a particular driver? */ |
| if (drv && (dev->driver != drv)) |
| return 0; |
| |
| xendrv = to_xenbus_driver(dev->driver); |
| |
| if (ignore_nonessential && xendrv->not_essential) |
| return 0; |
| |
| return (xendev->state < XenbusStateConnected || |
| (xendev->state == XenbusStateConnected && |
| xendrv->is_ready && !xendrv->is_ready(xendev))); |
| } |
| static int essential_device_connecting(struct device *dev, void *data) |
| { |
| return is_device_connecting(dev, data, true /* ignore PV[KBB+FB] */); |
| } |
| static int non_essential_device_connecting(struct device *dev, void *data) |
| { |
| return is_device_connecting(dev, data, false); |
| } |
| |
| static int exists_essential_connecting_device(struct device_driver *drv) |
| { |
| return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv, |
| essential_device_connecting); |
| } |
| static int exists_non_essential_connecting_device(struct device_driver *drv) |
| { |
| return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv, |
| non_essential_device_connecting); |
| } |
| |
| static int print_device_status(struct device *dev, void *data) |
| { |
| struct xenbus_device *xendev = to_xenbus_device(dev); |
| struct device_driver *drv = data; |
| |
| /* Is this operation limited to a particular driver? */ |
| if (drv && (dev->driver != drv)) |
| return 0; |
| |
| if (!dev->driver) { |
| /* Information only: is this too noisy? */ |
| pr_info("Device with no driver: %s\n", xendev->nodename); |
| } else if (xendev->state < XenbusStateConnected) { |
| enum xenbus_state rstate = XenbusStateUnknown; |
| if (xendev->otherend) |
| rstate = xenbus_read_driver_state(xendev->otherend); |
| pr_warn("Timeout connecting to device: %s (local state %d, remote state %d)\n", |
| xendev->nodename, xendev->state, rstate); |
| } |
| |
| return 0; |
| } |
| |
| /* We only wait for device setup after most initcalls have run. */ |
| static int ready_to_wait_for_devices; |
| |
| static bool wait_loop(unsigned long start, unsigned int max_delay, |
| unsigned int *seconds_waited) |
| { |
| if (time_after(jiffies, start + (*seconds_waited+5)*HZ)) { |
| if (!*seconds_waited) |
| pr_warn("Waiting for devices to initialise: "); |
| *seconds_waited += 5; |
| pr_cont("%us...", max_delay - *seconds_waited); |
| if (*seconds_waited == max_delay) { |
| pr_cont("\n"); |
| return true; |
| } |
| } |
| |
| schedule_timeout_interruptible(HZ/10); |
| |
| return false; |
| } |
| /* |
| * On a 5-minute timeout, wait for all devices currently configured. We need |
| * to do this to guarantee that the filesystems and / or network devices |
| * needed for boot are available, before we can allow the boot to proceed. |
| * |
| * This needs to be on a late_initcall, to happen after the frontend device |
| * drivers have been initialised, but before the root fs is mounted. |
| * |
| * A possible improvement here would be to have the tools add a per-device |
| * flag to the store entry, indicating whether it is needed at boot time. |
| * This would allow people who knew what they were doing to accelerate their |
| * boot slightly, but of course needs tools or manual intervention to set up |
| * those flags correctly. |
| */ |
| static void wait_for_devices(struct xenbus_driver *xendrv) |
| { |
| unsigned long start = jiffies; |
| struct device_driver *drv = xendrv ? &xendrv->driver : NULL; |
| unsigned int seconds_waited = 0; |
| |
| if (!ready_to_wait_for_devices || !xen_domain()) |
| return; |
| |
| while (exists_non_essential_connecting_device(drv)) |
| if (wait_loop(start, 30, &seconds_waited)) |
| break; |
| |
| /* Skips PVKB and PVFB check.*/ |
| while (exists_essential_connecting_device(drv)) |
| if (wait_loop(start, 270, &seconds_waited)) |
| break; |
| |
| if (seconds_waited) |
| printk("\n"); |
| |
| bus_for_each_dev(&xenbus_frontend.bus, NULL, drv, |
| print_device_status); |
| } |
| |
| int __xenbus_register_frontend(struct xenbus_driver *drv, struct module *owner, |
| const char *mod_name) |
| { |
| int ret; |
| |
| drv->read_otherend_details = read_backend_details; |
| |
| ret = xenbus_register_driver_common(drv, &xenbus_frontend, |
| owner, mod_name); |
| if (ret) |
| return ret; |
| |
| /* If this driver is loaded as a module wait for devices to attach. */ |
| wait_for_devices(drv); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(__xenbus_register_frontend); |
| |
| static DECLARE_WAIT_QUEUE_HEAD(backend_state_wq); |
| static int backend_state; |
| |
| static void xenbus_reset_backend_state_changed(struct xenbus_watch *w, |
| const char *path, const char *token) |
| { |
| if (xenbus_scanf(XBT_NIL, path, "", "%i", |
| &backend_state) != 1) |
| backend_state = XenbusStateUnknown; |
| printk(KERN_DEBUG "XENBUS: backend %s %s\n", |
| path, xenbus_strstate(backend_state)); |
| wake_up(&backend_state_wq); |
| } |
| |
| static void xenbus_reset_wait_for_backend(char *be, int expected) |
| { |
| long timeout; |
| timeout = wait_event_interruptible_timeout(backend_state_wq, |
| backend_state == expected, 5 * HZ); |
| if (timeout <= 0) |
| pr_info("backend %s timed out\n", be); |
| } |
| |
| /* |
| * Reset frontend if it is in Connected or Closed state. |
| * Wait for backend to catch up. |
| * State Connected happens during kdump, Closed after kexec. |
| */ |
| static void xenbus_reset_frontend(char *fe, char *be, int be_state) |
| { |
| struct xenbus_watch be_watch; |
| |
| printk(KERN_DEBUG "XENBUS: backend %s %s\n", |
| be, xenbus_strstate(be_state)); |
| |
| memset(&be_watch, 0, sizeof(be_watch)); |
| be_watch.node = kasprintf(GFP_NOIO | __GFP_HIGH, "%s/state", be); |
| if (!be_watch.node) |
| return; |
| |
| be_watch.callback = xenbus_reset_backend_state_changed; |
| backend_state = XenbusStateUnknown; |
| |
| pr_info("triggering reconnect on %s\n", be); |
| register_xenbus_watch(&be_watch); |
| |
| /* fall through to forward backend to state XenbusStateInitialising */ |
| switch (be_state) { |
| case XenbusStateConnected: |
| xenbus_printf(XBT_NIL, fe, "state", "%d", XenbusStateClosing); |
| xenbus_reset_wait_for_backend(be, XenbusStateClosing); |
| fallthrough; |
| |
| case XenbusStateClosing: |
| xenbus_printf(XBT_NIL, fe, "state", "%d", XenbusStateClosed); |
| xenbus_reset_wait_for_backend(be, XenbusStateClosed); |
| fallthrough; |
| |
| case XenbusStateClosed: |
| xenbus_printf(XBT_NIL, fe, "state", "%d", XenbusStateInitialising); |
| xenbus_reset_wait_for_backend(be, XenbusStateInitWait); |
| } |
| |
| unregister_xenbus_watch(&be_watch); |
| pr_info("reconnect done on %s\n", be); |
| kfree(be_watch.node); |
| } |
| |
| static void xenbus_check_frontend(char *class, char *dev) |
| { |
| int be_state, fe_state, err; |
| char *backend, *frontend; |
| |
| frontend = kasprintf(GFP_NOIO | __GFP_HIGH, "device/%s/%s", class, dev); |
| if (!frontend) |
| return; |
| |
| err = xenbus_scanf(XBT_NIL, frontend, "state", "%i", &fe_state); |
| if (err != 1) |
| goto out; |
| |
| switch (fe_state) { |
| case XenbusStateConnected: |
| case XenbusStateClosed: |
| printk(KERN_DEBUG "XENBUS: frontend %s %s\n", |
| frontend, xenbus_strstate(fe_state)); |
| backend = xenbus_read(XBT_NIL, frontend, "backend", NULL); |
| if (!backend || IS_ERR(backend)) |
| goto out; |
| err = xenbus_scanf(XBT_NIL, backend, "state", "%i", &be_state); |
| if (err == 1) |
| xenbus_reset_frontend(frontend, backend, be_state); |
| kfree(backend); |
| break; |
| default: |
| break; |
| } |
| out: |
| kfree(frontend); |
| } |
| |
| static void xenbus_reset_state(void) |
| { |
| char **devclass, **dev; |
| int devclass_n, dev_n; |
| int i, j; |
| |
| devclass = xenbus_directory(XBT_NIL, "device", "", &devclass_n); |
| if (IS_ERR(devclass)) |
| return; |
| |
| for (i = 0; i < devclass_n; i++) { |
| dev = xenbus_directory(XBT_NIL, "device", devclass[i], &dev_n); |
| if (IS_ERR(dev)) |
| continue; |
| for (j = 0; j < dev_n; j++) |
| xenbus_check_frontend(devclass[i], dev[j]); |
| kfree(dev); |
| } |
| kfree(devclass); |
| } |
| |
| static int frontend_probe_and_watch(struct notifier_block *notifier, |
| unsigned long event, |
| void *data) |
| { |
| /* reset devices in Connected or Closed state */ |
| if (xen_hvm_domain()) |
| xenbus_reset_state(); |
| /* Enumerate devices in xenstore and watch for changes. */ |
| xenbus_probe_devices(&xenbus_frontend); |
| register_xenbus_watch(&fe_watch); |
| |
| return NOTIFY_DONE; |
| } |
| |
| |
| static int __init xenbus_probe_frontend_init(void) |
| { |
| static struct notifier_block xenstore_notifier = { |
| .notifier_call = frontend_probe_and_watch |
| }; |
| int err; |
| |
| DPRINTK(""); |
| |
| /* Register ourselves with the kernel bus subsystem */ |
| err = bus_register(&xenbus_frontend.bus); |
| if (err) |
| return err; |
| |
| register_xenstore_notifier(&xenstore_notifier); |
| |
| return 0; |
| } |
| subsys_initcall(xenbus_probe_frontend_init); |
| |
| #ifndef MODULE |
| static int __init boot_wait_for_devices(void) |
| { |
| if (!xen_has_pv_devices()) |
| return -ENODEV; |
| |
| ready_to_wait_for_devices = 1; |
| wait_for_devices(NULL); |
| return 0; |
| } |
| |
| late_initcall(boot_wait_for_devices); |
| #endif |
| |
| MODULE_LICENSE("GPL"); |