blob: 0e834a2c062cf2659ba974f0546ba416fad556d1 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* linux/arch/arm64/crypto/aes-modes.S - chaining mode wrappers for AES
*
* Copyright (C) 2013 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
*/
/* included by aes-ce.S and aes-neon.S */
.text
.align 4
#ifndef MAX_STRIDE
#define MAX_STRIDE 4
#endif
#if MAX_STRIDE == 4
#define ST4(x...) x
#define ST5(x...)
#else
#define ST4(x...)
#define ST5(x...) x
#endif
SYM_FUNC_START_LOCAL(aes_encrypt_block4x)
encrypt_block4x v0, v1, v2, v3, w3, x2, x8, w7
ret
SYM_FUNC_END(aes_encrypt_block4x)
SYM_FUNC_START_LOCAL(aes_decrypt_block4x)
decrypt_block4x v0, v1, v2, v3, w3, x2, x8, w7
ret
SYM_FUNC_END(aes_decrypt_block4x)
#if MAX_STRIDE == 5
SYM_FUNC_START_LOCAL(aes_encrypt_block5x)
encrypt_block5x v0, v1, v2, v3, v4, w3, x2, x8, w7
ret
SYM_FUNC_END(aes_encrypt_block5x)
SYM_FUNC_START_LOCAL(aes_decrypt_block5x)
decrypt_block5x v0, v1, v2, v3, v4, w3, x2, x8, w7
ret
SYM_FUNC_END(aes_decrypt_block5x)
#endif
/*
* aes_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
* int blocks)
* aes_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
* int blocks)
*/
AES_FUNC_START(aes_ecb_encrypt)
frame_push 0
enc_prepare w3, x2, x5
.LecbencloopNx:
subs w4, w4, #MAX_STRIDE
bmi .Lecbenc1x
ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 pt blocks */
ST4( bl aes_encrypt_block4x )
ST5( ld1 {v4.16b}, [x1], #16 )
ST5( bl aes_encrypt_block5x )
st1 {v0.16b-v3.16b}, [x0], #64
ST5( st1 {v4.16b}, [x0], #16 )
b .LecbencloopNx
.Lecbenc1x:
adds w4, w4, #MAX_STRIDE
beq .Lecbencout
.Lecbencloop:
ld1 {v0.16b}, [x1], #16 /* get next pt block */
encrypt_block v0, w3, x2, x5, w6
st1 {v0.16b}, [x0], #16
subs w4, w4, #1
bne .Lecbencloop
.Lecbencout:
frame_pop
ret
AES_FUNC_END(aes_ecb_encrypt)
AES_FUNC_START(aes_ecb_decrypt)
frame_push 0
dec_prepare w3, x2, x5
.LecbdecloopNx:
subs w4, w4, #MAX_STRIDE
bmi .Lecbdec1x
ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 ct blocks */
ST4( bl aes_decrypt_block4x )
ST5( ld1 {v4.16b}, [x1], #16 )
ST5( bl aes_decrypt_block5x )
st1 {v0.16b-v3.16b}, [x0], #64
ST5( st1 {v4.16b}, [x0], #16 )
b .LecbdecloopNx
.Lecbdec1x:
adds w4, w4, #MAX_STRIDE
beq .Lecbdecout
.Lecbdecloop:
ld1 {v0.16b}, [x1], #16 /* get next ct block */
decrypt_block v0, w3, x2, x5, w6
st1 {v0.16b}, [x0], #16
subs w4, w4, #1
bne .Lecbdecloop
.Lecbdecout:
frame_pop
ret
AES_FUNC_END(aes_ecb_decrypt)
/*
* aes_cbc_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
* int blocks, u8 iv[])
* aes_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
* int blocks, u8 iv[])
* aes_essiv_cbc_encrypt(u8 out[], u8 const in[], u32 const rk1[],
* int rounds, int blocks, u8 iv[],
* u32 const rk2[]);
* aes_essiv_cbc_decrypt(u8 out[], u8 const in[], u32 const rk1[],
* int rounds, int blocks, u8 iv[],
* u32 const rk2[]);
*/
AES_FUNC_START(aes_essiv_cbc_encrypt)
ld1 {v4.16b}, [x5] /* get iv */
mov w8, #14 /* AES-256: 14 rounds */
enc_prepare w8, x6, x7
encrypt_block v4, w8, x6, x7, w9
enc_switch_key w3, x2, x6
b .Lcbcencloop4x
AES_FUNC_START(aes_cbc_encrypt)
ld1 {v4.16b}, [x5] /* get iv */
enc_prepare w3, x2, x6
.Lcbcencloop4x:
subs w4, w4, #4
bmi .Lcbcenc1x
ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 pt blocks */
eor v0.16b, v0.16b, v4.16b /* ..and xor with iv */
encrypt_block v0, w3, x2, x6, w7
eor v1.16b, v1.16b, v0.16b
encrypt_block v1, w3, x2, x6, w7
eor v2.16b, v2.16b, v1.16b
encrypt_block v2, w3, x2, x6, w7
eor v3.16b, v3.16b, v2.16b
encrypt_block v3, w3, x2, x6, w7
st1 {v0.16b-v3.16b}, [x0], #64
mov v4.16b, v3.16b
b .Lcbcencloop4x
.Lcbcenc1x:
adds w4, w4, #4
beq .Lcbcencout
.Lcbcencloop:
ld1 {v0.16b}, [x1], #16 /* get next pt block */
eor v4.16b, v4.16b, v0.16b /* ..and xor with iv */
encrypt_block v4, w3, x2, x6, w7
st1 {v4.16b}, [x0], #16
subs w4, w4, #1
bne .Lcbcencloop
.Lcbcencout:
st1 {v4.16b}, [x5] /* return iv */
ret
AES_FUNC_END(aes_cbc_encrypt)
AES_FUNC_END(aes_essiv_cbc_encrypt)
AES_FUNC_START(aes_essiv_cbc_decrypt)
ld1 {cbciv.16b}, [x5] /* get iv */
mov w8, #14 /* AES-256: 14 rounds */
enc_prepare w8, x6, x7
encrypt_block cbciv, w8, x6, x7, w9
b .Lessivcbcdecstart
AES_FUNC_START(aes_cbc_decrypt)
ld1 {cbciv.16b}, [x5] /* get iv */
.Lessivcbcdecstart:
frame_push 0
dec_prepare w3, x2, x6
.LcbcdecloopNx:
subs w4, w4, #MAX_STRIDE
bmi .Lcbcdec1x
ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 ct blocks */
#if MAX_STRIDE == 5
ld1 {v4.16b}, [x1], #16 /* get 1 ct block */
mov v5.16b, v0.16b
mov v6.16b, v1.16b
mov v7.16b, v2.16b
bl aes_decrypt_block5x
sub x1, x1, #32
eor v0.16b, v0.16b, cbciv.16b
eor v1.16b, v1.16b, v5.16b
ld1 {v5.16b}, [x1], #16 /* reload 1 ct block */
ld1 {cbciv.16b}, [x1], #16 /* reload 1 ct block */
eor v2.16b, v2.16b, v6.16b
eor v3.16b, v3.16b, v7.16b
eor v4.16b, v4.16b, v5.16b
#else
mov v4.16b, v0.16b
mov v5.16b, v1.16b
mov v6.16b, v2.16b
bl aes_decrypt_block4x
sub x1, x1, #16
eor v0.16b, v0.16b, cbciv.16b
eor v1.16b, v1.16b, v4.16b
ld1 {cbciv.16b}, [x1], #16 /* reload 1 ct block */
eor v2.16b, v2.16b, v5.16b
eor v3.16b, v3.16b, v6.16b
#endif
st1 {v0.16b-v3.16b}, [x0], #64
ST5( st1 {v4.16b}, [x0], #16 )
b .LcbcdecloopNx
.Lcbcdec1x:
adds w4, w4, #MAX_STRIDE
beq .Lcbcdecout
.Lcbcdecloop:
ld1 {v1.16b}, [x1], #16 /* get next ct block */
mov v0.16b, v1.16b /* ...and copy to v0 */
decrypt_block v0, w3, x2, x6, w7
eor v0.16b, v0.16b, cbciv.16b /* xor with iv => pt */
mov cbciv.16b, v1.16b /* ct is next iv */
st1 {v0.16b}, [x0], #16
subs w4, w4, #1
bne .Lcbcdecloop
.Lcbcdecout:
st1 {cbciv.16b}, [x5] /* return iv */
frame_pop
ret
AES_FUNC_END(aes_cbc_decrypt)
AES_FUNC_END(aes_essiv_cbc_decrypt)
/*
* aes_cbc_cts_encrypt(u8 out[], u8 const in[], u32 const rk[],
* int rounds, int bytes, u8 const iv[])
* aes_cbc_cts_decrypt(u8 out[], u8 const in[], u32 const rk[],
* int rounds, int bytes, u8 const iv[])
*/
AES_FUNC_START(aes_cbc_cts_encrypt)
adr_l x8, .Lcts_permute_table
sub x4, x4, #16
add x9, x8, #32
add x8, x8, x4
sub x9, x9, x4
ld1 {v3.16b}, [x8]
ld1 {v4.16b}, [x9]
ld1 {v0.16b}, [x1], x4 /* overlapping loads */
ld1 {v1.16b}, [x1]
ld1 {v5.16b}, [x5] /* get iv */
enc_prepare w3, x2, x6
eor v0.16b, v0.16b, v5.16b /* xor with iv */
tbl v1.16b, {v1.16b}, v4.16b
encrypt_block v0, w3, x2, x6, w7
eor v1.16b, v1.16b, v0.16b
tbl v0.16b, {v0.16b}, v3.16b
encrypt_block v1, w3, x2, x6, w7
add x4, x0, x4
st1 {v0.16b}, [x4] /* overlapping stores */
st1 {v1.16b}, [x0]
ret
AES_FUNC_END(aes_cbc_cts_encrypt)
AES_FUNC_START(aes_cbc_cts_decrypt)
adr_l x8, .Lcts_permute_table
sub x4, x4, #16
add x9, x8, #32
add x8, x8, x4
sub x9, x9, x4
ld1 {v3.16b}, [x8]
ld1 {v4.16b}, [x9]
ld1 {v0.16b}, [x1], x4 /* overlapping loads */
ld1 {v1.16b}, [x1]
ld1 {v5.16b}, [x5] /* get iv */
dec_prepare w3, x2, x6
decrypt_block v0, w3, x2, x6, w7
tbl v2.16b, {v0.16b}, v3.16b
eor v2.16b, v2.16b, v1.16b
tbx v0.16b, {v1.16b}, v4.16b
decrypt_block v0, w3, x2, x6, w7
eor v0.16b, v0.16b, v5.16b /* xor with iv */
add x4, x0, x4
st1 {v2.16b}, [x4] /* overlapping stores */
st1 {v0.16b}, [x0]
ret
AES_FUNC_END(aes_cbc_cts_decrypt)
.section ".rodata", "a"
.align 6
.Lcts_permute_table:
.byte 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
.byte 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
.byte 0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7
.byte 0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf
.byte 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
.byte 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
.previous
/*
* This macro generates the code for CTR and XCTR mode.
*/
.macro ctr_encrypt xctr
// Arguments
OUT .req x0
IN .req x1
KEY .req x2
ROUNDS_W .req w3
BYTES_W .req w4
IV .req x5
BYTE_CTR_W .req w6 // XCTR only
// Intermediate values
CTR_W .req w11 // XCTR only
CTR .req x11 // XCTR only
IV_PART .req x12
BLOCKS .req x13
BLOCKS_W .req w13
frame_push 0
enc_prepare ROUNDS_W, KEY, IV_PART
ld1 {vctr.16b}, [IV]
/*
* Keep 64 bits of the IV in a register. For CTR mode this lets us
* easily increment the IV. For XCTR mode this lets us efficiently XOR
* the 64-bit counter with the IV.
*/
.if \xctr
umov IV_PART, vctr.d[0]
lsr CTR_W, BYTE_CTR_W, #4
.else
umov IV_PART, vctr.d[1]
rev IV_PART, IV_PART
.endif
.LctrloopNx\xctr:
add BLOCKS_W, BYTES_W, #15
sub BYTES_W, BYTES_W, #MAX_STRIDE << 4
lsr BLOCKS_W, BLOCKS_W, #4
mov w8, #MAX_STRIDE
cmp BLOCKS_W, w8
csel BLOCKS_W, BLOCKS_W, w8, lt
/*
* Set up the counter values in v0-v{MAX_STRIDE-1}.
*
* If we are encrypting less than MAX_STRIDE blocks, the tail block
* handling code expects the last keystream block to be in
* v{MAX_STRIDE-1}. For example: if encrypting two blocks with
* MAX_STRIDE=5, then v3 and v4 should have the next two counter blocks.
*/
.if \xctr
add CTR, CTR, BLOCKS
.else
adds IV_PART, IV_PART, BLOCKS
.endif
mov v0.16b, vctr.16b
mov v1.16b, vctr.16b
mov v2.16b, vctr.16b
mov v3.16b, vctr.16b
ST5( mov v4.16b, vctr.16b )
.if \xctr
sub x6, CTR, #MAX_STRIDE - 1
sub x7, CTR, #MAX_STRIDE - 2
sub x8, CTR, #MAX_STRIDE - 3
sub x9, CTR, #MAX_STRIDE - 4
ST5( sub x10, CTR, #MAX_STRIDE - 5 )
eor x6, x6, IV_PART
eor x7, x7, IV_PART
eor x8, x8, IV_PART
eor x9, x9, IV_PART
ST5( eor x10, x10, IV_PART )
mov v0.d[0], x6
mov v1.d[0], x7
mov v2.d[0], x8
mov v3.d[0], x9
ST5( mov v4.d[0], x10 )
.else
bcs 0f
.subsection 1
/*
* This subsection handles carries.
*
* Conditional branching here is allowed with respect to time
* invariance since the branches are dependent on the IV instead
* of the plaintext or key. This code is rarely executed in
* practice anyway.
*/
/* Apply carry to outgoing counter. */
0: umov x8, vctr.d[0]
rev x8, x8
add x8, x8, #1
rev x8, x8
ins vctr.d[0], x8
/*
* Apply carry to counter blocks if needed.
*
* Since the carry flag was set, we know 0 <= IV_PART <
* MAX_STRIDE. Using the value of IV_PART we can determine how
* many counter blocks need to be updated.
*/
cbz IV_PART, 2f
adr x16, 1f
sub x16, x16, IV_PART, lsl #3
br x16
bti c
mov v0.d[0], vctr.d[0]
bti c
mov v1.d[0], vctr.d[0]
bti c
mov v2.d[0], vctr.d[0]
bti c
mov v3.d[0], vctr.d[0]
ST5( bti c )
ST5( mov v4.d[0], vctr.d[0] )
1: b 2f
.previous
2: rev x7, IV_PART
ins vctr.d[1], x7
sub x7, IV_PART, #MAX_STRIDE - 1
sub x8, IV_PART, #MAX_STRIDE - 2
sub x9, IV_PART, #MAX_STRIDE - 3
rev x7, x7
rev x8, x8
mov v1.d[1], x7
rev x9, x9
ST5( sub x10, IV_PART, #MAX_STRIDE - 4 )
mov v2.d[1], x8
ST5( rev x10, x10 )
mov v3.d[1], x9
ST5( mov v4.d[1], x10 )
.endif
/*
* If there are at least MAX_STRIDE blocks left, XOR the data with
* keystream and store. Otherwise jump to tail handling.
*/
tbnz BYTES_W, #31, .Lctrtail\xctr
ld1 {v5.16b-v7.16b}, [IN], #48
ST4( bl aes_encrypt_block4x )
ST5( bl aes_encrypt_block5x )
eor v0.16b, v5.16b, v0.16b
ST4( ld1 {v5.16b}, [IN], #16 )
eor v1.16b, v6.16b, v1.16b
ST5( ld1 {v5.16b-v6.16b}, [IN], #32 )
eor v2.16b, v7.16b, v2.16b
eor v3.16b, v5.16b, v3.16b
ST5( eor v4.16b, v6.16b, v4.16b )
st1 {v0.16b-v3.16b}, [OUT], #64
ST5( st1 {v4.16b}, [OUT], #16 )
cbz BYTES_W, .Lctrout\xctr
b .LctrloopNx\xctr
.Lctrout\xctr:
.if !\xctr
st1 {vctr.16b}, [IV] /* return next CTR value */
.endif
frame_pop
ret
.Lctrtail\xctr:
/*
* Handle up to MAX_STRIDE * 16 - 1 bytes of plaintext
*
* This code expects the last keystream block to be in v{MAX_STRIDE-1}.
* For example: if encrypting two blocks with MAX_STRIDE=5, then v3 and
* v4 should have the next two counter blocks.
*
* This allows us to store the ciphertext by writing to overlapping
* regions of memory. Any invalid ciphertext blocks get overwritten by
* correctly computed blocks. This approach greatly simplifies the
* logic for storing the ciphertext.
*/
mov x16, #16
ands w7, BYTES_W, #0xf
csel x13, x7, x16, ne
ST5( cmp BYTES_W, #64 - (MAX_STRIDE << 4))
ST5( csel x14, x16, xzr, gt )
cmp BYTES_W, #48 - (MAX_STRIDE << 4)
csel x15, x16, xzr, gt
cmp BYTES_W, #32 - (MAX_STRIDE << 4)
csel x16, x16, xzr, gt
cmp BYTES_W, #16 - (MAX_STRIDE << 4)
adr_l x9, .Lcts_permute_table
add x9, x9, x13
ble .Lctrtail1x\xctr
ST5( ld1 {v5.16b}, [IN], x14 )
ld1 {v6.16b}, [IN], x15
ld1 {v7.16b}, [IN], x16
ST4( bl aes_encrypt_block4x )
ST5( bl aes_encrypt_block5x )
ld1 {v8.16b}, [IN], x13
ld1 {v9.16b}, [IN]
ld1 {v10.16b}, [x9]
ST4( eor v6.16b, v6.16b, v0.16b )
ST4( eor v7.16b, v7.16b, v1.16b )
ST4( tbl v3.16b, {v3.16b}, v10.16b )
ST4( eor v8.16b, v8.16b, v2.16b )
ST4( eor v9.16b, v9.16b, v3.16b )
ST5( eor v5.16b, v5.16b, v0.16b )
ST5( eor v6.16b, v6.16b, v1.16b )
ST5( tbl v4.16b, {v4.16b}, v10.16b )
ST5( eor v7.16b, v7.16b, v2.16b )
ST5( eor v8.16b, v8.16b, v3.16b )
ST5( eor v9.16b, v9.16b, v4.16b )
ST5( st1 {v5.16b}, [OUT], x14 )
st1 {v6.16b}, [OUT], x15
st1 {v7.16b}, [OUT], x16
add x13, x13, OUT
st1 {v9.16b}, [x13] // overlapping stores
st1 {v8.16b}, [OUT]
b .Lctrout\xctr
.Lctrtail1x\xctr:
/*
* Handle <= 16 bytes of plaintext
*
* This code always reads and writes 16 bytes. To avoid out of bounds
* accesses, XCTR and CTR modes must use a temporary buffer when
* encrypting/decrypting less than 16 bytes.
*
* This code is unusual in that it loads the input and stores the output
* relative to the end of the buffers rather than relative to the start.
* This causes unusual behaviour when encrypting/decrypting less than 16
* bytes; the end of the data is expected to be at the end of the
* temporary buffer rather than the start of the data being at the start
* of the temporary buffer.
*/
sub x8, x7, #16
csel x7, x7, x8, eq
add IN, IN, x7
add OUT, OUT, x7
ld1 {v5.16b}, [IN]
ld1 {v6.16b}, [OUT]
ST5( mov v3.16b, v4.16b )
encrypt_block v3, ROUNDS_W, KEY, x8, w7
ld1 {v10.16b-v11.16b}, [x9]
tbl v3.16b, {v3.16b}, v10.16b
sshr v11.16b, v11.16b, #7
eor v5.16b, v5.16b, v3.16b
bif v5.16b, v6.16b, v11.16b
st1 {v5.16b}, [OUT]
b .Lctrout\xctr
// Arguments
.unreq OUT
.unreq IN
.unreq KEY
.unreq ROUNDS_W
.unreq BYTES_W
.unreq IV
.unreq BYTE_CTR_W // XCTR only
// Intermediate values
.unreq CTR_W // XCTR only
.unreq CTR // XCTR only
.unreq IV_PART
.unreq BLOCKS
.unreq BLOCKS_W
.endm
/*
* aes_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
* int bytes, u8 ctr[])
*
* The input and output buffers must always be at least 16 bytes even if
* encrypting/decrypting less than 16 bytes. Otherwise out of bounds
* accesses will occur. The data to be encrypted/decrypted is expected
* to be at the end of this 16-byte temporary buffer rather than the
* start.
*/
AES_FUNC_START(aes_ctr_encrypt)
ctr_encrypt 0
AES_FUNC_END(aes_ctr_encrypt)
/*
* aes_xctr_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
* int bytes, u8 const iv[], int byte_ctr)
*
* The input and output buffers must always be at least 16 bytes even if
* encrypting/decrypting less than 16 bytes. Otherwise out of bounds
* accesses will occur. The data to be encrypted/decrypted is expected
* to be at the end of this 16-byte temporary buffer rather than the
* start.
*/
AES_FUNC_START(aes_xctr_encrypt)
ctr_encrypt 1
AES_FUNC_END(aes_xctr_encrypt)
/*
* aes_xts_encrypt(u8 out[], u8 const in[], u8 const rk1[], int rounds,
* int bytes, u8 const rk2[], u8 iv[], int first)
* aes_xts_decrypt(u8 out[], u8 const in[], u8 const rk1[], int rounds,
* int bytes, u8 const rk2[], u8 iv[], int first)
*/
.macro next_tweak, out, in, tmp
sshr \tmp\().2d, \in\().2d, #63
and \tmp\().16b, \tmp\().16b, xtsmask.16b
add \out\().2d, \in\().2d, \in\().2d
ext \tmp\().16b, \tmp\().16b, \tmp\().16b, #8
eor \out\().16b, \out\().16b, \tmp\().16b
.endm
.macro xts_load_mask, tmp
movi xtsmask.2s, #0x1
movi \tmp\().2s, #0x87
uzp1 xtsmask.4s, xtsmask.4s, \tmp\().4s
.endm
AES_FUNC_START(aes_xts_encrypt)
frame_push 0
ld1 {v4.16b}, [x6]
xts_load_mask v8
cbz w7, .Lxtsencnotfirst
enc_prepare w3, x5, x8
xts_cts_skip_tw w7, .LxtsencNx
encrypt_block v4, w3, x5, x8, w7 /* first tweak */
enc_switch_key w3, x2, x8
b .LxtsencNx
.Lxtsencnotfirst:
enc_prepare w3, x2, x8
.LxtsencloopNx:
next_tweak v4, v4, v8
.LxtsencNx:
subs w4, w4, #64
bmi .Lxtsenc1x
ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 pt blocks */
next_tweak v5, v4, v8
eor v0.16b, v0.16b, v4.16b
next_tweak v6, v5, v8
eor v1.16b, v1.16b, v5.16b
eor v2.16b, v2.16b, v6.16b
next_tweak v7, v6, v8
eor v3.16b, v3.16b, v7.16b
bl aes_encrypt_block4x
eor v3.16b, v3.16b, v7.16b
eor v0.16b, v0.16b, v4.16b
eor v1.16b, v1.16b, v5.16b
eor v2.16b, v2.16b, v6.16b
st1 {v0.16b-v3.16b}, [x0], #64
mov v4.16b, v7.16b
cbz w4, .Lxtsencret
xts_reload_mask v8
b .LxtsencloopNx
.Lxtsenc1x:
adds w4, w4, #64
beq .Lxtsencout
subs w4, w4, #16
bmi .LxtsencctsNx
.Lxtsencloop:
ld1 {v0.16b}, [x1], #16
.Lxtsencctsout:
eor v0.16b, v0.16b, v4.16b
encrypt_block v0, w3, x2, x8, w7
eor v0.16b, v0.16b, v4.16b
cbz w4, .Lxtsencout
subs w4, w4, #16
next_tweak v4, v4, v8
bmi .Lxtsenccts
st1 {v0.16b}, [x0], #16
b .Lxtsencloop
.Lxtsencout:
st1 {v0.16b}, [x0]
.Lxtsencret:
st1 {v4.16b}, [x6]
frame_pop
ret
.LxtsencctsNx:
mov v0.16b, v3.16b
sub x0, x0, #16
.Lxtsenccts:
adr_l x8, .Lcts_permute_table
add x1, x1, w4, sxtw /* rewind input pointer */
add w4, w4, #16 /* # bytes in final block */
add x9, x8, #32
add x8, x8, x4
sub x9, x9, x4
add x4, x0, x4 /* output address of final block */
ld1 {v1.16b}, [x1] /* load final block */
ld1 {v2.16b}, [x8]
ld1 {v3.16b}, [x9]
tbl v2.16b, {v0.16b}, v2.16b
tbx v0.16b, {v1.16b}, v3.16b
st1 {v2.16b}, [x4] /* overlapping stores */
mov w4, wzr
b .Lxtsencctsout
AES_FUNC_END(aes_xts_encrypt)
AES_FUNC_START(aes_xts_decrypt)
frame_push 0
/* subtract 16 bytes if we are doing CTS */
sub w8, w4, #0x10
tst w4, #0xf
csel w4, w4, w8, eq
ld1 {v4.16b}, [x6]
xts_load_mask v8
xts_cts_skip_tw w7, .Lxtsdecskiptw
cbz w7, .Lxtsdecnotfirst
enc_prepare w3, x5, x8
encrypt_block v4, w3, x5, x8, w7 /* first tweak */
.Lxtsdecskiptw:
dec_prepare w3, x2, x8
b .LxtsdecNx
.Lxtsdecnotfirst:
dec_prepare w3, x2, x8
.LxtsdecloopNx:
next_tweak v4, v4, v8
.LxtsdecNx:
subs w4, w4, #64
bmi .Lxtsdec1x
ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 ct blocks */
next_tweak v5, v4, v8
eor v0.16b, v0.16b, v4.16b
next_tweak v6, v5, v8
eor v1.16b, v1.16b, v5.16b
eor v2.16b, v2.16b, v6.16b
next_tweak v7, v6, v8
eor v3.16b, v3.16b, v7.16b
bl aes_decrypt_block4x
eor v3.16b, v3.16b, v7.16b
eor v0.16b, v0.16b, v4.16b
eor v1.16b, v1.16b, v5.16b
eor v2.16b, v2.16b, v6.16b
st1 {v0.16b-v3.16b}, [x0], #64
mov v4.16b, v7.16b
cbz w4, .Lxtsdecout
xts_reload_mask v8
b .LxtsdecloopNx
.Lxtsdec1x:
adds w4, w4, #64
beq .Lxtsdecout
subs w4, w4, #16
.Lxtsdecloop:
ld1 {v0.16b}, [x1], #16
bmi .Lxtsdeccts
.Lxtsdecctsout:
eor v0.16b, v0.16b, v4.16b
decrypt_block v0, w3, x2, x8, w7
eor v0.16b, v0.16b, v4.16b
st1 {v0.16b}, [x0], #16
cbz w4, .Lxtsdecout
subs w4, w4, #16
next_tweak v4, v4, v8
b .Lxtsdecloop
.Lxtsdecout:
st1 {v4.16b}, [x6]
frame_pop
ret
.Lxtsdeccts:
adr_l x8, .Lcts_permute_table
add x1, x1, w4, sxtw /* rewind input pointer */
add w4, w4, #16 /* # bytes in final block */
add x9, x8, #32
add x8, x8, x4
sub x9, x9, x4
add x4, x0, x4 /* output address of final block */
next_tweak v5, v4, v8
ld1 {v1.16b}, [x1] /* load final block */
ld1 {v2.16b}, [x8]
ld1 {v3.16b}, [x9]
eor v0.16b, v0.16b, v5.16b
decrypt_block v0, w3, x2, x8, w7
eor v0.16b, v0.16b, v5.16b
tbl v2.16b, {v0.16b}, v2.16b
tbx v0.16b, {v1.16b}, v3.16b
st1 {v2.16b}, [x4] /* overlapping stores */
mov w4, wzr
b .Lxtsdecctsout
AES_FUNC_END(aes_xts_decrypt)
/*
* aes_mac_update(u8 const in[], u32 const rk[], int rounds,
* int blocks, u8 dg[], int enc_before, int enc_after)
*/
AES_FUNC_START(aes_mac_update)
ld1 {v0.16b}, [x4] /* get dg */
enc_prepare w2, x1, x7
cbz w5, .Lmacloop4x
encrypt_block v0, w2, x1, x7, w8
.Lmacloop4x:
subs w3, w3, #4
bmi .Lmac1x
ld1 {v1.16b-v4.16b}, [x0], #64 /* get next pt block */
eor v0.16b, v0.16b, v1.16b /* ..and xor with dg */
encrypt_block v0, w2, x1, x7, w8
eor v0.16b, v0.16b, v2.16b
encrypt_block v0, w2, x1, x7, w8
eor v0.16b, v0.16b, v3.16b
encrypt_block v0, w2, x1, x7, w8
eor v0.16b, v0.16b, v4.16b
cmp w3, wzr
csinv x5, x6, xzr, eq
cbz w5, .Lmacout
encrypt_block v0, w2, x1, x7, w8
st1 {v0.16b}, [x4] /* return dg */
cond_yield .Lmacout, x7, x8
b .Lmacloop4x
.Lmac1x:
add w3, w3, #4
.Lmacloop:
cbz w3, .Lmacout
ld1 {v1.16b}, [x0], #16 /* get next pt block */
eor v0.16b, v0.16b, v1.16b /* ..and xor with dg */
subs w3, w3, #1
csinv x5, x6, xzr, eq
cbz w5, .Lmacout
.Lmacenc:
encrypt_block v0, w2, x1, x7, w8
b .Lmacloop
.Lmacout:
st1 {v0.16b}, [x4] /* return dg */
mov w0, w3
ret
AES_FUNC_END(aes_mac_update)