arch/arm/boot/dts/r8a7794-silk.dts - linux - Git at Google

 /*
  * Device Tree Source for the SILK board
  *
  * Copyright (C) 2014 Renesas Electronics Corporation
  * Copyright (C) 2014-2015 Renesas Solutions Corp.
  * Copyright (C) 2014-2015 Cogent Embedded, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
  * kind, whether express or implied.
  */

 /*
  * SSI-AK4643
  *
  * SW1: 2-1: AK4643
  *      2-3: ADV7511
  *
  * This command is required before playback/capture:
  *
  *	amixer set "LINEOUT Mixer DACL" on
  */

 /dts-v1/;
 #include "r8a7794.dtsi"
 #include <dt-bindings/gpio/gpio.h>

 / {
 	model = "SILK";
 	compatible = "renesas,silk", "renesas,r8a7794";

 	aliases {
 		serial0 = &scif2;
 	};

 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
 		stdout-path = "serial0:115200n8";
 	};

 	memory@40000000 {
 		device_type = "memory";
 		reg = <0 0x40000000 0 0x40000000>;
 	};

 	d3_3v: regulator-d3-3v {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-boot-on;
 		regulator-always-on;
 	};

 	vcc_sdhi1: regulator-vcc-sdhi1 {
 		compatible = "regulator-fixed";

 		regulator-name = "SDHI1 Vcc";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;

 		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};

 	vccq_sdhi1: regulator-vccq-sdhi1 {
 		compatible = "regulator-gpio";

 		regulator-name = "SDHI1 VccQ";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;

 		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
 		states = <3300000 1
 			  1800000 0>;
 	};

 	vga-encoder {
 		compatible = "adi,adv7123";

 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			port@0 {
 				reg = <0>;
 				adv7123_in: endpoint {
 					remote-endpoint = <&du_out_rgb1>;
 				};
 			};
 			port@1 {
 				reg = <1>;
 				adv7123_out: endpoint {
 					remote-endpoint = <&vga_in>;
 				};
 			};
 		};
 	};

 	hdmi-out {
 		compatible = "hdmi-connector";
 		type = "a";

 		port {
 			hdmi_con: endpoint {
 				remote-endpoint = <&adv7511_out>;
 			};
 		};
 	};

 	vga {
 		compatible = "vga-connector";

 		port {
 			vga_in: endpoint {
 				remote-endpoint = <&adv7123_out>;
 			};
 		};
 	};

 	x2_clk: x2-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <148500000>;
 	};

 	x3_clk: x3-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <74250000>;
 	};

 	x9_clk: audio_clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <12288000>;
 	};

 	sound {
 		compatible = "simple-audio-card";

 		simple-audio-card,format = "left_j";
 		simple-audio-card,bitclock-master = <&soundcodec>;
 		simple-audio-card,frame-master = <&soundcodec>;

 		simple-audio-card,cpu {
 			sound-dai = <&rcar_sound>;
 		};

 		soundcodec: simple-audio-card,codec {
 			sound-dai = <&ak4643>;
 			clocks = <&x9_clk>;
 		};
 	};
 };

 &extal_clk {
 	clock-frequency = <20000000>;
 };

 &pfc {
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";

 	scif2_pins: scif2 {
 		groups = "scif2_data";
 		function = "scif2";
 	};

 	scif_clk_pins: scif_clk {
 		groups = "scif_clk";
 		function = "scif_clk";
 	};

 	ether_pins: ether {
 		groups = "eth_link", "eth_mdio", "eth_rmii";
 		function = "eth";
 	};

 	phy1_pins: phy1 {
 		groups = "intc_irq8";
 		function = "intc";
 	};

 	i2c1_pins: i2c1 {
 		groups = "i2c1";
 		function = "i2c1";
 	};

 	mmcif0_pins: mmcif0 {
 		groups = "mmc_data8", "mmc_ctrl";
 		function = "mmc";
 	};

 	sdhi1_pins: sd1 {
 		groups = "sdhi1_data4", "sdhi1_ctrl";
 		function = "sdhi1";
 	};

 	qspi_pins: qspi {
 		groups = "qspi_ctrl", "qspi_data4";
 		function = "qspi";
 	};

 	vin0_pins: vin0 {
 		groups = "vin0_data8", "vin0_clk";
 		function = "vin0";
 	};

 	usb0_pins: usb0 {
 		groups = "usb0";
 		function = "usb0";
 	};

 	usb1_pins: usb1 {
 		groups = "usb1";
 		function = "usb1";
 	};

 	du0_pins: du0 {
 		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
 		function = "du0";
 	};

 	du1_pins: du1 {
 		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
 		function = "du1";
 	};

 	ssi_pins: sound {
 		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 		function = "ssi";
 	};

 	audio_clk_pins: audio_clk {
 		groups = "audio_clkc";
 		function = "audio_clk";
 	};
 };

 &scif2 {
 	pinctrl-0 = <&scif2_pins>;
 	pinctrl-names = "default";

 	status = "okay";
 };

 &scif_clk {
 	clock-frequency = <14745600>;
 };

 &ether {
 	pinctrl-0 = <&ether_pins &phy1_pins>;
 	pinctrl-names = "default";

 	phy-handle = <&phy1>;
 	renesas,ether-link-active-low;
 	status = "okay";

 	phy1: ethernet-phy@1 {
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
 	};
 };

 &i2c1 {
 	pinctrl-0 = <&i2c1_pins>;
 	pinctrl-names = "default";

 	status = "okay";
 	clock-frequency = <400000>;

 	ak4643: codec@12 {
 		compatible = "asahi-kasei,ak4643";
 		#sound-dai-cells = <0>;
 		reg = <0x12>;
 	};

 	composite-in@20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
 		remote = <&vin0>;

 		port {
 			adv7180: endpoint {
 				bus-width = <8>;
 				remote-endpoint = <&vin0ep>;
 			};
 		};
 	};

 	hdmi@39 {
 		compatible = "adi,adv7511w";
 		reg = <0x39>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;

 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
 		adi,input-style = <1>;
 		adi,input-justification = "evenly";

 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			port@0 {
 				reg = <0>;
 				adv7511_in: endpoint {
 					remote-endpoint = <&du_out_rgb0>;
 				};
 			};

 			port@1 {
 				reg = <1>;
 				adv7511_out: endpoint {
 					remote-endpoint = <&hdmi_con>;
 				};
 			};
 		};
 	};
 };

 &mmcif0 {
 	pinctrl-0 = <&mmcif0_pins>;
 	pinctrl-names = "default";

 	vmmc-supply = <&d3_3v>;
 	vqmmc-supply = <&d3_3v>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
 };

 &sdhi1 {
 	pinctrl-0 = <&sdhi1_pins>;
 	pinctrl-names = "default";

 	vmmc-supply = <&vcc_sdhi1>;
 	vqmmc-supply = <&vccq_sdhi1>;
 	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

 &qspi {
 	pinctrl-0 = <&qspi_pins>;
 	pinctrl-names = "default";

 	status = "okay";

 	flash@0 {
 		compatible = "spansion,s25fl512s", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		spi-cpol;
 		spi-cpha;
 		m25p,fast-read;

 		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;

 			partition@0 {
 				label = "loader";
 				reg = <0x00000000 0x00040000>;
 				read-only;
 			};
 			partition@40000 {
 				label = "user";
 				reg = <0x00040000 0x00400000>;
 				read-only;
 			};
 			partition@440000 {
 				label = "flash";
 				reg = <0x00440000 0x03bc0000>;
 			};
 		};
 	};
 };

 /* composite video input */
 &vin0 {
 	status = "okay";
 	pinctrl-0 = <&vin0_pins>;
 	pinctrl-names = "default";

 	port {
 		#address-cells = <1>;
 		#size-cells = <0>;

 		vin0ep: endpoint {
 			remote-endpoint = <&adv7180>;
 			bus-width = <8>;
 		};
 	};
 };

 &pci0 {
 	status = "okay";
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
 };

 &pci1 {
 	status = "okay";
 	pinctrl-0 = <&usb1_pins>;
 	pinctrl-names = "default";
 };

 &usbphy {
 	status = "okay";
 };

 &du {
 	pinctrl-0 = <&du0_pins &du1_pins>;
 	pinctrl-names = "default";
 	status = "okay";

 	clocks = <&mstp7_clks R8A7794_CLK_DU0>,
 		 <&mstp7_clks R8A7794_CLK_DU1>,
 		 <&x2_clk>, <&x3_clk>;
 	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";

 	ports {
 		port@0 {
 			endpoint {
 				remote-endpoint = <&adv7511_in>;
 			};
 		};
 		port@1 {
 			endpoint {
 				remote-endpoint = <&adv7123_in>;
 			};
 		};
 	};
 };

 &rcar_sound {
 	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
 	pinctrl-names = "default";
 	status = "okay";

 	/* Single DAI */
 	#sound-dai-cells = <0>;

 	rcar_sound,dai {
 		dai0 {
 			playback = <&ssi0>;
 			capture  = <&ssi1>;
 		};
 	};
 };

 &ssi1 {
 	shared-pin;
 };
	/*
	* Device Tree Source for the SILK board
	*
	* Copyright (C) 2014 Renesas Electronics Corporation
	* Copyright (C) 2014-2015 Renesas Solutions Corp.
	* Copyright (C) 2014-2015 Cogent Embedded, Inc.
	*
	* This file is licensed under the terms of the GNU General Public License
	* version 2. This program is licensed "as is" without any warranty of any
	* kind, whether express or implied.
	*/

	/*
	* SSI-AK4643
	*
	* SW1: 2-1: AK4643
	* 2-3: ADV7511
	*
	* This command is required before playback/capture:
	*
	* amixer set "LINEOUT Mixer DACL" on
	*/

	/dts-v1/;
	#include "r8a7794.dtsi"
	#include <dt-bindings/gpio/gpio.h>

	/ {
	model = "SILK";
	compatible = "renesas,silk", "renesas,r8a7794";

	aliases {
	serial0 = &scif2;
	};

	chosen {
	bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
	stdout-path = "serial0:115200n8";
	};

	memory@40000000 {
	device_type = "memory";
	reg = <0 0x40000000 0 0x40000000>;
	};

	d3_3v: regulator-d3-3v {
	compatible = "regulator-fixed";
	regulator-name = "D3.3V";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-boot-on;
	regulator-always-on;
	};

	vcc_sdhi1: regulator-vcc-sdhi1 {
	compatible = "regulator-fixed";

	regulator-name = "SDHI1 Vcc";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;

	gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
	enable-active-high;
	};

	vccq_sdhi1: regulator-vccq-sdhi1 {
	compatible = "regulator-gpio";

	regulator-name = "SDHI1 VccQ";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <3300000>;

	gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
	gpios-states = <1>;
	states = <3300000 1
	1800000 0>;
	};

	vga-encoder {
	compatible = "adi,adv7123";

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@0 {
	reg = <0>;
	adv7123_in: endpoint {
	remote-endpoint = <&du_out_rgb1>;
	};
	};
	port@1 {
	reg = <1>;
	adv7123_out: endpoint {
	remote-endpoint = <&vga_in>;
	};
	};
	};
	};

	hdmi-out {
	compatible = "hdmi-connector";
	type = "a";

	port {
	hdmi_con: endpoint {
	remote-endpoint = <&adv7511_out>;
	};
	};
	};

	vga {
	compatible = "vga-connector";

	port {
	vga_in: endpoint {
	remote-endpoint = <&adv7123_out>;
	};
	};
	};

	x2_clk: x2-clock {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <148500000>;
	};

	x3_clk: x3-clock {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <74250000>;
	};

	x9_clk: audio_clock {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <12288000>;
	};

	sound {
	compatible = "simple-audio-card";

	simple-audio-card,format = "left_j";
	simple-audio-card,bitclock-master = <&soundcodec>;
	simple-audio-card,frame-master = <&soundcodec>;

	simple-audio-card,cpu {
	sound-dai = <&rcar_sound>;
	};

	soundcodec: simple-audio-card,codec {
	sound-dai = <&ak4643>;
	clocks = <&x9_clk>;
	};
	};
	};

	&extal_clk {
	clock-frequency = <20000000>;
	};

	&pfc {
	pinctrl-0 = <&scif_clk_pins>;
	pinctrl-names = "default";

	scif2_pins: scif2 {
	groups = "scif2_data";
	function = "scif2";
	};

	scif_clk_pins: scif_clk {
	groups = "scif_clk";
	function = "scif_clk";
	};

	ether_pins: ether {
	groups = "eth_link", "eth_mdio", "eth_rmii";
	function = "eth";
	};

	phy1_pins: phy1 {
	groups = "intc_irq8";
	function = "intc";
	};

	i2c1_pins: i2c1 {
	groups = "i2c1";
	function = "i2c1";
	};

	mmcif0_pins: mmcif0 {
	groups = "mmc_data8", "mmc_ctrl";
	function = "mmc";
	};

	sdhi1_pins: sd1 {
	groups = "sdhi1_data4", "sdhi1_ctrl";
	function = "sdhi1";
	};

	qspi_pins: qspi {
	groups = "qspi_ctrl", "qspi_data4";
	function = "qspi";
	};

	vin0_pins: vin0 {
	groups = "vin0_data8", "vin0_clk";
	function = "vin0";
	};

	usb0_pins: usb0 {
	groups = "usb0";
	function = "usb0";
	};

	usb1_pins: usb1 {
	groups = "usb1";
	function = "usb1";
	};

	du0_pins: du0 {
	groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
	function = "du0";
	};

	du1_pins: du1 {
	groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
	function = "du1";
	};

	ssi_pins: sound {
	groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
	function = "ssi";
	};

	audio_clk_pins: audio_clk {
	groups = "audio_clkc";
	function = "audio_clk";
	};
	};

	&scif2 {
	pinctrl-0 = <&scif2_pins>;
	pinctrl-names = "default";

	status = "okay";
	};

	&scif_clk {
	clock-frequency = <14745600>;
	};

	&ether {
	pinctrl-0 = <&ether_pins &phy1_pins>;
	pinctrl-names = "default";

	phy-handle = <&phy1>;
	renesas,ether-link-active-low;
	status = "okay";

	phy1: ethernet-phy@1 {
	reg = <1>;
	interrupt-parent = <&irqc0>;
	interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
	micrel,led-mode = <1>;
	};
	};

	&i2c1 {
	pinctrl-0 = <&i2c1_pins>;
	pinctrl-names = "default";

	status = "okay";
	clock-frequency = <400000>;

	ak4643: codec@12 {
	compatible = "asahi-kasei,ak4643";
	#sound-dai-cells = <0>;
	reg = <0x12>;
	};

	composite-in@20 {
	compatible = "adi,adv7180";
	reg = <0x20>;
	remote = <&vin0>;

	port {
	adv7180: endpoint {
	bus-width = <8>;
	remote-endpoint = <&vin0ep>;
	};
	};
	};

	hdmi@39 {
	compatible = "adi,adv7511w";
	reg = <0x39>;
	interrupt-parent = <&gpio5>;
	interrupts = <23 IRQ_TYPE_LEVEL_LOW>;

	adi,input-depth = <8>;
	adi,input-colorspace = "rgb";
	adi,input-clock = "1x";
	adi,input-style = <1>;
	adi,input-justification = "evenly";

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@0 {
	reg = <0>;
	adv7511_in: endpoint {
	remote-endpoint = <&du_out_rgb0>;
	};
	};

	port@1 {
	reg = <1>;
	adv7511_out: endpoint {
	remote-endpoint = <&hdmi_con>;
	};
	};
	};
	};
	};

	&mmcif0 {
	pinctrl-0 = <&mmcif0_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&d3_3v>;
	vqmmc-supply = <&d3_3v>;
	bus-width = <8>;
	non-removable;
	status = "okay";
	};

	&sdhi1 {
	pinctrl-0 = <&sdhi1_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&vcc_sdhi1>;
	vqmmc-supply = <&vccq_sdhi1>;
	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
	status = "okay";
	};

	&qspi {
	pinctrl-0 = <&qspi_pins>;
	pinctrl-names = "default";

	status = "okay";

	flash@0 {
	compatible = "spansion,s25fl512s", "jedec,spi-nor";
	reg = <0>;
	spi-max-frequency = <30000000>;
	spi-tx-bus-width = <4>;
	spi-rx-bus-width = <4>;
	spi-cpol;
	spi-cpha;
	m25p,fast-read;

	partitions {
	compatible = "fixed-partitions";
	#address-cells = <1>;
	#size-cells = <1>;

	partition@0 {
	label = "loader";
	reg = <0x00000000 0x00040000>;
	read-only;
	};
	partition@40000 {
	label = "user";
	reg = <0x00040000 0x00400000>;
	read-only;
	};
	partition@440000 {
	label = "flash";
	reg = <0x00440000 0x03bc0000>;
	};
	};
	};
	};

	/* composite video input */
	&vin0 {
	status = "okay";
	pinctrl-0 = <&vin0_pins>;
	pinctrl-names = "default";

	port {
	#address-cells = <1>;
	#size-cells = <0>;

	vin0ep: endpoint {
	remote-endpoint = <&adv7180>;
	bus-width = <8>;
	};
	};
	};

	&pci0 {
	status = "okay";
	pinctrl-0 = <&usb0_pins>;
	pinctrl-names = "default";
	};

	&pci1 {
	status = "okay";
	pinctrl-0 = <&usb1_pins>;
	pinctrl-names = "default";
	};

	&usbphy {
	status = "okay";
	};

	&du {
	pinctrl-0 = <&du0_pins &du1_pins>;
	pinctrl-names = "default";
	status = "okay";

	clocks = <&mstp7_clks R8A7794_CLK_DU0>,
	<&mstp7_clks R8A7794_CLK_DU1>,
	<&x2_clk>, <&x3_clk>;
	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";

	ports {
	port@0 {
	endpoint {
	remote-endpoint = <&adv7511_in>;
	};
	};
	port@1 {
	endpoint {
	remote-endpoint = <&adv7123_in>;
	};
	};
	};
	};

	&rcar_sound {
	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
	pinctrl-names = "default";
	status = "okay";

	/* Single DAI */
	#sound-dai-cells = <0>;

	rcar_sound,dai {
	dai0 {
	playback = <&ssi0>;
	capture = <&ssi1>;
	};
	};
	};

	&ssi1 {
	shared-pin;
	};