| /* |
| * skl-message.c - HDA DSP interface for FW registration, Pipe and Module |
| * configurations |
| * |
| * Copyright (C) 2015 Intel Corp |
| * Author:Rafal Redzimski <rafal.f.redzimski@intel.com> |
| * Jeeja KP <jeeja.kp@intel.com> |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as version 2, as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/pci.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include "skl-sst-dsp.h" |
| #include "skl-sst-ipc.h" |
| #include "skl.h" |
| #include "../common/sst-dsp.h" |
| #include "../common/sst-dsp-priv.h" |
| #include "skl-topology.h" |
| #include "skl-tplg-interface.h" |
| |
| static int skl_alloc_dma_buf(struct device *dev, |
| struct snd_dma_buffer *dmab, size_t size) |
| { |
| struct hdac_ext_bus *ebus = dev_get_drvdata(dev); |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| |
| if (!bus) |
| return -ENODEV; |
| |
| return bus->io_ops->dma_alloc_pages(bus, SNDRV_DMA_TYPE_DEV, size, dmab); |
| } |
| |
| static int skl_free_dma_buf(struct device *dev, struct snd_dma_buffer *dmab) |
| { |
| struct hdac_ext_bus *ebus = dev_get_drvdata(dev); |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| |
| if (!bus) |
| return -ENODEV; |
| |
| bus->io_ops->dma_free_pages(bus, dmab); |
| |
| return 0; |
| } |
| |
| #define NOTIFICATION_PARAM_ID 3 |
| #define NOTIFICATION_MASK 0xf |
| |
| /* disable notfication for underruns/overruns from firmware module */ |
| void skl_dsp_enable_notification(struct skl_sst *ctx, bool enable) |
| { |
| struct notification_mask mask; |
| struct skl_ipc_large_config_msg msg = {0}; |
| |
| mask.notify = NOTIFICATION_MASK; |
| mask.enable = enable; |
| |
| msg.large_param_id = NOTIFICATION_PARAM_ID; |
| msg.param_data_size = sizeof(mask); |
| |
| skl_ipc_set_large_config(&ctx->ipc, &msg, (u32 *)&mask); |
| } |
| |
| static int skl_dsp_setup_spib(struct device *dev, unsigned int size, |
| int stream_tag, int enable) |
| { |
| struct hdac_ext_bus *ebus = dev_get_drvdata(dev); |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| struct hdac_stream *stream = snd_hdac_get_stream(bus, |
| SNDRV_PCM_STREAM_PLAYBACK, stream_tag); |
| struct hdac_ext_stream *estream; |
| |
| if (!stream) |
| return -EINVAL; |
| |
| estream = stream_to_hdac_ext_stream(stream); |
| /* enable/disable SPIB for this hdac stream */ |
| snd_hdac_ext_stream_spbcap_enable(ebus, enable, stream->index); |
| |
| /* set the spib value */ |
| snd_hdac_ext_stream_set_spib(ebus, estream, size); |
| |
| return 0; |
| } |
| |
| static int skl_dsp_prepare(struct device *dev, unsigned int format, |
| unsigned int size, struct snd_dma_buffer *dmab) |
| { |
| struct hdac_ext_bus *ebus = dev_get_drvdata(dev); |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| struct hdac_ext_stream *estream; |
| struct hdac_stream *stream; |
| struct snd_pcm_substream substream; |
| int ret; |
| |
| if (!bus) |
| return -ENODEV; |
| |
| memset(&substream, 0, sizeof(substream)); |
| substream.stream = SNDRV_PCM_STREAM_PLAYBACK; |
| |
| estream = snd_hdac_ext_stream_assign(ebus, &substream, |
| HDAC_EXT_STREAM_TYPE_HOST); |
| if (!estream) |
| return -ENODEV; |
| |
| stream = hdac_stream(estream); |
| |
| /* assign decouple host dma channel */ |
| ret = snd_hdac_dsp_prepare(stream, format, size, dmab); |
| if (ret < 0) |
| return ret; |
| |
| skl_dsp_setup_spib(dev, size, stream->stream_tag, true); |
| |
| return stream->stream_tag; |
| } |
| |
| static int skl_dsp_trigger(struct device *dev, bool start, int stream_tag) |
| { |
| struct hdac_ext_bus *ebus = dev_get_drvdata(dev); |
| struct hdac_stream *stream; |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| |
| if (!bus) |
| return -ENODEV; |
| |
| stream = snd_hdac_get_stream(bus, |
| SNDRV_PCM_STREAM_PLAYBACK, stream_tag); |
| if (!stream) |
| return -EINVAL; |
| |
| snd_hdac_dsp_trigger(stream, start); |
| |
| return 0; |
| } |
| |
| static int skl_dsp_cleanup(struct device *dev, |
| struct snd_dma_buffer *dmab, int stream_tag) |
| { |
| struct hdac_ext_bus *ebus = dev_get_drvdata(dev); |
| struct hdac_stream *stream; |
| struct hdac_ext_stream *estream; |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| |
| if (!bus) |
| return -ENODEV; |
| |
| stream = snd_hdac_get_stream(bus, |
| SNDRV_PCM_STREAM_PLAYBACK, stream_tag); |
| if (!stream) |
| return -EINVAL; |
| |
| estream = stream_to_hdac_ext_stream(stream); |
| skl_dsp_setup_spib(dev, 0, stream_tag, false); |
| snd_hdac_ext_stream_release(estream, HDAC_EXT_STREAM_TYPE_HOST); |
| |
| snd_hdac_dsp_cleanup(stream, dmab); |
| |
| return 0; |
| } |
| |
| static struct skl_dsp_loader_ops skl_get_loader_ops(void) |
| { |
| struct skl_dsp_loader_ops loader_ops; |
| |
| memset(&loader_ops, 0, sizeof(struct skl_dsp_loader_ops)); |
| |
| loader_ops.alloc_dma_buf = skl_alloc_dma_buf; |
| loader_ops.free_dma_buf = skl_free_dma_buf; |
| |
| return loader_ops; |
| }; |
| |
| static struct skl_dsp_loader_ops bxt_get_loader_ops(void) |
| { |
| struct skl_dsp_loader_ops loader_ops; |
| |
| memset(&loader_ops, 0, sizeof(loader_ops)); |
| |
| loader_ops.alloc_dma_buf = skl_alloc_dma_buf; |
| loader_ops.free_dma_buf = skl_free_dma_buf; |
| loader_ops.prepare = skl_dsp_prepare; |
| loader_ops.trigger = skl_dsp_trigger; |
| loader_ops.cleanup = skl_dsp_cleanup; |
| |
| return loader_ops; |
| }; |
| |
| static const struct skl_dsp_ops dsp_ops[] = { |
| { |
| .id = 0x9d70, |
| .loader_ops = skl_get_loader_ops, |
| .init = skl_sst_dsp_init, |
| .init_fw = skl_sst_init_fw, |
| .cleanup = skl_sst_dsp_cleanup |
| }, |
| { |
| .id = 0x9d71, |
| .loader_ops = skl_get_loader_ops, |
| .init = kbl_sst_dsp_init, |
| .init_fw = skl_sst_init_fw, |
| .cleanup = skl_sst_dsp_cleanup |
| }, |
| { |
| .id = 0x5a98, |
| .loader_ops = bxt_get_loader_ops, |
| .init = bxt_sst_dsp_init, |
| .init_fw = bxt_sst_init_fw, |
| .cleanup = bxt_sst_dsp_cleanup |
| }, |
| { |
| .id = 0x3198, |
| .loader_ops = bxt_get_loader_ops, |
| .init = bxt_sst_dsp_init, |
| .init_fw = bxt_sst_init_fw, |
| .cleanup = bxt_sst_dsp_cleanup |
| }, |
| }; |
| |
| const struct skl_dsp_ops *skl_get_dsp_ops(int pci_id) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(dsp_ops); i++) { |
| if (dsp_ops[i].id == pci_id) |
| return &dsp_ops[i]; |
| } |
| |
| return NULL; |
| } |
| |
| int skl_init_dsp(struct skl *skl) |
| { |
| void __iomem *mmio_base; |
| struct hdac_ext_bus *ebus = &skl->ebus; |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| struct skl_dsp_loader_ops loader_ops; |
| int irq = bus->irq; |
| const struct skl_dsp_ops *ops; |
| int ret; |
| |
| /* enable ppcap interrupt */ |
| snd_hdac_ext_bus_ppcap_enable(&skl->ebus, true); |
| snd_hdac_ext_bus_ppcap_int_enable(&skl->ebus, true); |
| |
| /* read the BAR of the ADSP MMIO */ |
| mmio_base = pci_ioremap_bar(skl->pci, 4); |
| if (mmio_base == NULL) { |
| dev_err(bus->dev, "ioremap error\n"); |
| return -ENXIO; |
| } |
| |
| ops = skl_get_dsp_ops(skl->pci->device); |
| if (!ops) |
| return -EIO; |
| |
| loader_ops = ops->loader_ops(); |
| ret = ops->init(bus->dev, mmio_base, irq, |
| skl->fw_name, loader_ops, |
| &skl->skl_sst); |
| |
| if (ret < 0) |
| return ret; |
| |
| skl->skl_sst->dsp_ops = ops; |
| dev_dbg(bus->dev, "dsp registration status=%d\n", ret); |
| |
| return ret; |
| } |
| |
| int skl_free_dsp(struct skl *skl) |
| { |
| struct hdac_ext_bus *ebus = &skl->ebus; |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| struct skl_sst *ctx = skl->skl_sst; |
| |
| /* disable ppcap interrupt */ |
| snd_hdac_ext_bus_ppcap_int_enable(&skl->ebus, false); |
| |
| ctx->dsp_ops->cleanup(bus->dev, ctx); |
| |
| if (ctx->dsp->addr.lpe) |
| iounmap(ctx->dsp->addr.lpe); |
| |
| return 0; |
| } |
| |
| /* |
| * In the case of "suspend_active" i.e, the Audio IP being active |
| * during system suspend, immediately excecute any pending D0i3 work |
| * before suspending. This is needed for the IP to work in low power |
| * mode during system suspend. In the case of normal suspend, cancel |
| * any pending D0i3 work. |
| */ |
| int skl_suspend_late_dsp(struct skl *skl) |
| { |
| struct skl_sst *ctx = skl->skl_sst; |
| struct delayed_work *dwork; |
| |
| if (!ctx) |
| return 0; |
| |
| dwork = &ctx->d0i3.work; |
| |
| if (dwork->work.func) { |
| if (skl->supend_active) |
| flush_delayed_work(dwork); |
| else |
| cancel_delayed_work_sync(dwork); |
| } |
| |
| return 0; |
| } |
| |
| int skl_suspend_dsp(struct skl *skl) |
| { |
| struct skl_sst *ctx = skl->skl_sst; |
| int ret; |
| |
| /* if ppcap is not supported return 0 */ |
| if (!skl->ebus.bus.ppcap) |
| return 0; |
| |
| ret = skl_dsp_sleep(ctx->dsp); |
| if (ret < 0) |
| return ret; |
| |
| /* disable ppcap interrupt */ |
| snd_hdac_ext_bus_ppcap_int_enable(&skl->ebus, false); |
| snd_hdac_ext_bus_ppcap_enable(&skl->ebus, false); |
| |
| return 0; |
| } |
| |
| int skl_resume_dsp(struct skl *skl) |
| { |
| struct skl_sst *ctx = skl->skl_sst; |
| int ret; |
| |
| /* if ppcap is not supported return 0 */ |
| if (!skl->ebus.bus.ppcap) |
| return 0; |
| |
| /* enable ppcap interrupt */ |
| snd_hdac_ext_bus_ppcap_enable(&skl->ebus, true); |
| snd_hdac_ext_bus_ppcap_int_enable(&skl->ebus, true); |
| |
| /* check if DSP 1st boot is done */ |
| if (skl->skl_sst->is_first_boot == true) |
| return 0; |
| |
| ret = skl_dsp_wake(ctx->dsp); |
| if (ret < 0) |
| return ret; |
| |
| skl_dsp_enable_notification(skl->skl_sst, false); |
| return ret; |
| } |
| |
| enum skl_bitdepth skl_get_bit_depth(int params) |
| { |
| switch (params) { |
| case 8: |
| return SKL_DEPTH_8BIT; |
| |
| case 16: |
| return SKL_DEPTH_16BIT; |
| |
| case 24: |
| return SKL_DEPTH_24BIT; |
| |
| case 32: |
| return SKL_DEPTH_32BIT; |
| |
| default: |
| return SKL_DEPTH_INVALID; |
| |
| } |
| } |
| |
| /* |
| * Each module in DSP expects a base module configuration, which consists of |
| * PCM format information, which we calculate in driver and resource values |
| * which are read from widget information passed through topology binary |
| * This is send when we create a module with INIT_INSTANCE IPC msg |
| */ |
| static void skl_set_base_module_format(struct skl_sst *ctx, |
| struct skl_module_cfg *mconfig, |
| struct skl_base_cfg *base_cfg) |
| { |
| struct skl_module_fmt *format = &mconfig->in_fmt[0]; |
| |
| base_cfg->audio_fmt.number_of_channels = (u8)format->channels; |
| |
| base_cfg->audio_fmt.s_freq = format->s_freq; |
| base_cfg->audio_fmt.bit_depth = format->bit_depth; |
| base_cfg->audio_fmt.valid_bit_depth = format->valid_bit_depth; |
| base_cfg->audio_fmt.ch_cfg = format->ch_cfg; |
| |
| dev_dbg(ctx->dev, "bit_depth=%x valid_bd=%x ch_config=%x\n", |
| format->bit_depth, format->valid_bit_depth, |
| format->ch_cfg); |
| |
| base_cfg->audio_fmt.channel_map = format->ch_map; |
| |
| base_cfg->audio_fmt.interleaving = format->interleaving_style; |
| |
| base_cfg->cps = mconfig->mcps; |
| base_cfg->ibs = mconfig->ibs; |
| base_cfg->obs = mconfig->obs; |
| base_cfg->is_pages = mconfig->mem_pages; |
| } |
| |
| /* |
| * Copies copier capabilities into copier module and updates copier module |
| * config size. |
| */ |
| static void skl_copy_copier_caps(struct skl_module_cfg *mconfig, |
| struct skl_cpr_cfg *cpr_mconfig) |
| { |
| if (mconfig->formats_config.caps_size == 0) |
| return; |
| |
| memcpy(cpr_mconfig->gtw_cfg.config_data, |
| mconfig->formats_config.caps, |
| mconfig->formats_config.caps_size); |
| |
| cpr_mconfig->gtw_cfg.config_length = |
| (mconfig->formats_config.caps_size) / 4; |
| } |
| |
| #define SKL_NON_GATEWAY_CPR_NODE_ID 0xFFFFFFFF |
| /* |
| * Calculate the gatewat settings required for copier module, type of |
| * gateway and index of gateway to use |
| */ |
| static u32 skl_get_node_id(struct skl_sst *ctx, |
| struct skl_module_cfg *mconfig) |
| { |
| union skl_connector_node_id node_id = {0}; |
| union skl_ssp_dma_node ssp_node = {0}; |
| struct skl_pipe_params *params = mconfig->pipe->p_params; |
| |
| switch (mconfig->dev_type) { |
| case SKL_DEVICE_BT: |
| node_id.node.dma_type = |
| (SKL_CONN_SOURCE == mconfig->hw_conn_type) ? |
| SKL_DMA_I2S_LINK_OUTPUT_CLASS : |
| SKL_DMA_I2S_LINK_INPUT_CLASS; |
| node_id.node.vindex = params->host_dma_id + |
| (mconfig->vbus_id << 3); |
| break; |
| |
| case SKL_DEVICE_I2S: |
| node_id.node.dma_type = |
| (SKL_CONN_SOURCE == mconfig->hw_conn_type) ? |
| SKL_DMA_I2S_LINK_OUTPUT_CLASS : |
| SKL_DMA_I2S_LINK_INPUT_CLASS; |
| ssp_node.dma_node.time_slot_index = mconfig->time_slot; |
| ssp_node.dma_node.i2s_instance = mconfig->vbus_id; |
| node_id.node.vindex = ssp_node.val; |
| break; |
| |
| case SKL_DEVICE_DMIC: |
| node_id.node.dma_type = SKL_DMA_DMIC_LINK_INPUT_CLASS; |
| node_id.node.vindex = mconfig->vbus_id + |
| (mconfig->time_slot); |
| break; |
| |
| case SKL_DEVICE_HDALINK: |
| node_id.node.dma_type = |
| (SKL_CONN_SOURCE == mconfig->hw_conn_type) ? |
| SKL_DMA_HDA_LINK_OUTPUT_CLASS : |
| SKL_DMA_HDA_LINK_INPUT_CLASS; |
| node_id.node.vindex = params->link_dma_id; |
| break; |
| |
| case SKL_DEVICE_HDAHOST: |
| node_id.node.dma_type = |
| (SKL_CONN_SOURCE == mconfig->hw_conn_type) ? |
| SKL_DMA_HDA_HOST_OUTPUT_CLASS : |
| SKL_DMA_HDA_HOST_INPUT_CLASS; |
| node_id.node.vindex = params->host_dma_id; |
| break; |
| |
| default: |
| node_id.val = 0xFFFFFFFF; |
| break; |
| } |
| |
| return node_id.val; |
| } |
| |
| static void skl_setup_cpr_gateway_cfg(struct skl_sst *ctx, |
| struct skl_module_cfg *mconfig, |
| struct skl_cpr_cfg *cpr_mconfig) |
| { |
| u32 dma_io_buf; |
| |
| cpr_mconfig->gtw_cfg.node_id = skl_get_node_id(ctx, mconfig); |
| |
| if (cpr_mconfig->gtw_cfg.node_id == SKL_NON_GATEWAY_CPR_NODE_ID) { |
| cpr_mconfig->cpr_feature_mask = 0; |
| return; |
| } |
| |
| switch (mconfig->hw_conn_type) { |
| case SKL_CONN_SOURCE: |
| if (mconfig->dev_type == SKL_DEVICE_HDAHOST) |
| dma_io_buf = mconfig->ibs; |
| else |
| dma_io_buf = mconfig->obs; |
| break; |
| |
| case SKL_CONN_SINK: |
| if (mconfig->dev_type == SKL_DEVICE_HDAHOST) |
| dma_io_buf = mconfig->obs; |
| else |
| dma_io_buf = mconfig->ibs; |
| break; |
| |
| default: |
| dev_warn(ctx->dev, "wrong connection type: %d\n", |
| mconfig->hw_conn_type); |
| return; |
| } |
| |
| cpr_mconfig->gtw_cfg.dma_buffer_size = |
| mconfig->dma_buffer_size * dma_io_buf; |
| |
| cpr_mconfig->cpr_feature_mask = 0; |
| cpr_mconfig->gtw_cfg.config_length = 0; |
| |
| skl_copy_copier_caps(mconfig, cpr_mconfig); |
| } |
| |
| #define DMA_CONTROL_ID 5 |
| |
| int skl_dsp_set_dma_control(struct skl_sst *ctx, struct skl_module_cfg *mconfig) |
| { |
| struct skl_dma_control *dma_ctrl; |
| struct skl_ipc_large_config_msg msg = {0}; |
| int err = 0; |
| |
| |
| /* |
| * if blob size zero, then return |
| */ |
| if (mconfig->formats_config.caps_size == 0) |
| return 0; |
| |
| msg.large_param_id = DMA_CONTROL_ID; |
| msg.param_data_size = sizeof(struct skl_dma_control) + |
| mconfig->formats_config.caps_size; |
| |
| dma_ctrl = kzalloc(msg.param_data_size, GFP_KERNEL); |
| if (dma_ctrl == NULL) |
| return -ENOMEM; |
| |
| dma_ctrl->node_id = skl_get_node_id(ctx, mconfig); |
| |
| /* size in dwords */ |
| dma_ctrl->config_length = mconfig->formats_config.caps_size / 4; |
| |
| memcpy(dma_ctrl->config_data, mconfig->formats_config.caps, |
| mconfig->formats_config.caps_size); |
| |
| err = skl_ipc_set_large_config(&ctx->ipc, &msg, (u32 *)dma_ctrl); |
| |
| kfree(dma_ctrl); |
| return err; |
| } |
| |
| static void skl_setup_out_format(struct skl_sst *ctx, |
| struct skl_module_cfg *mconfig, |
| struct skl_audio_data_format *out_fmt) |
| { |
| struct skl_module_fmt *format = &mconfig->out_fmt[0]; |
| |
| out_fmt->number_of_channels = (u8)format->channels; |
| out_fmt->s_freq = format->s_freq; |
| out_fmt->bit_depth = format->bit_depth; |
| out_fmt->valid_bit_depth = format->valid_bit_depth; |
| out_fmt->ch_cfg = format->ch_cfg; |
| |
| out_fmt->channel_map = format->ch_map; |
| out_fmt->interleaving = format->interleaving_style; |
| out_fmt->sample_type = format->sample_type; |
| |
| dev_dbg(ctx->dev, "copier out format chan=%d fre=%d bitdepth=%d\n", |
| out_fmt->number_of_channels, format->s_freq, format->bit_depth); |
| } |
| |
| /* |
| * DSP needs SRC module for frequency conversion, SRC takes base module |
| * configuration and the target frequency as extra parameter passed as src |
| * config |
| */ |
| static void skl_set_src_format(struct skl_sst *ctx, |
| struct skl_module_cfg *mconfig, |
| struct skl_src_module_cfg *src_mconfig) |
| { |
| struct skl_module_fmt *fmt = &mconfig->out_fmt[0]; |
| |
| skl_set_base_module_format(ctx, mconfig, |
| (struct skl_base_cfg *)src_mconfig); |
| |
| src_mconfig->src_cfg = fmt->s_freq; |
| } |
| |
| /* |
| * DSP needs updown module to do channel conversion. updown module take base |
| * module configuration and channel configuration |
| * It also take coefficients and now we have defaults applied here |
| */ |
| static void skl_set_updown_mixer_format(struct skl_sst *ctx, |
| struct skl_module_cfg *mconfig, |
| struct skl_up_down_mixer_cfg *mixer_mconfig) |
| { |
| struct skl_module_fmt *fmt = &mconfig->out_fmt[0]; |
| int i = 0; |
| |
| skl_set_base_module_format(ctx, mconfig, |
| (struct skl_base_cfg *)mixer_mconfig); |
| mixer_mconfig->out_ch_cfg = fmt->ch_cfg; |
| |
| /* Select F/W default coefficient */ |
| mixer_mconfig->coeff_sel = 0x0; |
| |
| /* User coeff, don't care since we are selecting F/W defaults */ |
| for (i = 0; i < UP_DOWN_MIXER_MAX_COEFF; i++) |
| mixer_mconfig->coeff[i] = 0xDEADBEEF; |
| } |
| |
| /* |
| * 'copier' is DSP internal module which copies data from Host DMA (HDA host |
| * dma) or link (hda link, SSP, PDM) |
| * Here we calculate the copier module parameters, like PCM format, output |
| * format, gateway settings |
| * copier_module_config is sent as input buffer with INIT_INSTANCE IPC msg |
| */ |
| static void skl_set_copier_format(struct skl_sst *ctx, |
| struct skl_module_cfg *mconfig, |
| struct skl_cpr_cfg *cpr_mconfig) |
| { |
| struct skl_audio_data_format *out_fmt = &cpr_mconfig->out_fmt; |
| struct skl_base_cfg *base_cfg = (struct skl_base_cfg *)cpr_mconfig; |
| |
| skl_set_base_module_format(ctx, mconfig, base_cfg); |
| |
| skl_setup_out_format(ctx, mconfig, out_fmt); |
| skl_setup_cpr_gateway_cfg(ctx, mconfig, cpr_mconfig); |
| } |
| |
| /* |
| * Algo module are DSP pre processing modules. Algo module take base module |
| * configuration and params |
| */ |
| |
| static void skl_set_algo_format(struct skl_sst *ctx, |
| struct skl_module_cfg *mconfig, |
| struct skl_algo_cfg *algo_mcfg) |
| { |
| struct skl_base_cfg *base_cfg = (struct skl_base_cfg *)algo_mcfg; |
| |
| skl_set_base_module_format(ctx, mconfig, base_cfg); |
| |
| if (mconfig->formats_config.caps_size == 0) |
| return; |
| |
| memcpy(algo_mcfg->params, |
| mconfig->formats_config.caps, |
| mconfig->formats_config.caps_size); |
| |
| } |
| |
| /* |
| * Mic select module allows selecting one or many input channels, thus |
| * acting as a demux. |
| * |
| * Mic select module take base module configuration and out-format |
| * configuration |
| */ |
| static void skl_set_base_outfmt_format(struct skl_sst *ctx, |
| struct skl_module_cfg *mconfig, |
| struct skl_base_outfmt_cfg *base_outfmt_mcfg) |
| { |
| struct skl_audio_data_format *out_fmt = &base_outfmt_mcfg->out_fmt; |
| struct skl_base_cfg *base_cfg = |
| (struct skl_base_cfg *)base_outfmt_mcfg; |
| |
| skl_set_base_module_format(ctx, mconfig, base_cfg); |
| skl_setup_out_format(ctx, mconfig, out_fmt); |
| } |
| |
| static u16 skl_get_module_param_size(struct skl_sst *ctx, |
| struct skl_module_cfg *mconfig) |
| { |
| u16 param_size; |
| |
| switch (mconfig->m_type) { |
| case SKL_MODULE_TYPE_COPIER: |
| param_size = sizeof(struct skl_cpr_cfg); |
| param_size += mconfig->formats_config.caps_size; |
| return param_size; |
| |
| case SKL_MODULE_TYPE_SRCINT: |
| return sizeof(struct skl_src_module_cfg); |
| |
| case SKL_MODULE_TYPE_UPDWMIX: |
| return sizeof(struct skl_up_down_mixer_cfg); |
| |
| case SKL_MODULE_TYPE_ALGO: |
| param_size = sizeof(struct skl_base_cfg); |
| param_size += mconfig->formats_config.caps_size; |
| return param_size; |
| |
| case SKL_MODULE_TYPE_BASE_OUTFMT: |
| case SKL_MODULE_TYPE_MIC_SELECT: |
| case SKL_MODULE_TYPE_KPB: |
| return sizeof(struct skl_base_outfmt_cfg); |
| |
| default: |
| /* |
| * return only base cfg when no specific module type is |
| * specified |
| */ |
| return sizeof(struct skl_base_cfg); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * DSP firmware supports various modules like copier, SRC, updown etc. |
| * These modules required various parameters to be calculated and sent for |
| * the module initialization to DSP. By default a generic module needs only |
| * base module format configuration |
| */ |
| |
| static int skl_set_module_format(struct skl_sst *ctx, |
| struct skl_module_cfg *module_config, |
| u16 *module_config_size, |
| void **param_data) |
| { |
| u16 param_size; |
| |
| param_size = skl_get_module_param_size(ctx, module_config); |
| |
| *param_data = kzalloc(param_size, GFP_KERNEL); |
| if (NULL == *param_data) |
| return -ENOMEM; |
| |
| *module_config_size = param_size; |
| |
| switch (module_config->m_type) { |
| case SKL_MODULE_TYPE_COPIER: |
| skl_set_copier_format(ctx, module_config, *param_data); |
| break; |
| |
| case SKL_MODULE_TYPE_SRCINT: |
| skl_set_src_format(ctx, module_config, *param_data); |
| break; |
| |
| case SKL_MODULE_TYPE_UPDWMIX: |
| skl_set_updown_mixer_format(ctx, module_config, *param_data); |
| break; |
| |
| case SKL_MODULE_TYPE_ALGO: |
| skl_set_algo_format(ctx, module_config, *param_data); |
| break; |
| |
| case SKL_MODULE_TYPE_BASE_OUTFMT: |
| case SKL_MODULE_TYPE_MIC_SELECT: |
| case SKL_MODULE_TYPE_KPB: |
| skl_set_base_outfmt_format(ctx, module_config, *param_data); |
| break; |
| |
| default: |
| skl_set_base_module_format(ctx, module_config, *param_data); |
| break; |
| |
| } |
| |
| dev_dbg(ctx->dev, "Module type=%d config size: %d bytes\n", |
| module_config->id.module_id, param_size); |
| print_hex_dump_debug("Module params:", DUMP_PREFIX_OFFSET, 8, 4, |
| *param_data, param_size, false); |
| return 0; |
| } |
| |
| static int skl_get_queue_index(struct skl_module_pin *mpin, |
| struct skl_module_inst_id id, int max) |
| { |
| int i; |
| |
| for (i = 0; i < max; i++) { |
| if (mpin[i].id.module_id == id.module_id && |
| mpin[i].id.instance_id == id.instance_id) |
| return i; |
| } |
| |
| return -EINVAL; |
| } |
| |
| /* |
| * Allocates queue for each module. |
| * if dynamic, the pin_index is allocated 0 to max_pin. |
| * In static, the pin_index is fixed based on module_id and instance id |
| */ |
| static int skl_alloc_queue(struct skl_module_pin *mpin, |
| struct skl_module_cfg *tgt_cfg, int max) |
| { |
| int i; |
| struct skl_module_inst_id id = tgt_cfg->id; |
| /* |
| * if pin in dynamic, find first free pin |
| * otherwise find match module and instance id pin as topology will |
| * ensure a unique pin is assigned to this so no need to |
| * allocate/free |
| */ |
| for (i = 0; i < max; i++) { |
| if (mpin[i].is_dynamic) { |
| if (!mpin[i].in_use && |
| mpin[i].pin_state == SKL_PIN_UNBIND) { |
| |
| mpin[i].in_use = true; |
| mpin[i].id.module_id = id.module_id; |
| mpin[i].id.instance_id = id.instance_id; |
| mpin[i].id.pvt_id = id.pvt_id; |
| mpin[i].tgt_mcfg = tgt_cfg; |
| return i; |
| } |
| } else { |
| if (mpin[i].id.module_id == id.module_id && |
| mpin[i].id.instance_id == id.instance_id && |
| mpin[i].pin_state == SKL_PIN_UNBIND) { |
| |
| mpin[i].tgt_mcfg = tgt_cfg; |
| return i; |
| } |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static void skl_free_queue(struct skl_module_pin *mpin, int q_index) |
| { |
| if (mpin[q_index].is_dynamic) { |
| mpin[q_index].in_use = false; |
| mpin[q_index].id.module_id = 0; |
| mpin[q_index].id.instance_id = 0; |
| mpin[q_index].id.pvt_id = 0; |
| } |
| mpin[q_index].pin_state = SKL_PIN_UNBIND; |
| mpin[q_index].tgt_mcfg = NULL; |
| } |
| |
| /* Module state will be set to unint, if all the out pin state is UNBIND */ |
| |
| static void skl_clear_module_state(struct skl_module_pin *mpin, int max, |
| struct skl_module_cfg *mcfg) |
| { |
| int i; |
| bool found = false; |
| |
| for (i = 0; i < max; i++) { |
| if (mpin[i].pin_state == SKL_PIN_UNBIND) |
| continue; |
| found = true; |
| break; |
| } |
| |
| if (!found) |
| mcfg->m_state = SKL_MODULE_INIT_DONE; |
| return; |
| } |
| |
| /* |
| * A module needs to be instanataited in DSP. A mdoule is present in a |
| * collection of module referred as a PIPE. |
| * We first calculate the module format, based on module type and then |
| * invoke the DSP by sending IPC INIT_INSTANCE using ipc helper |
| */ |
| int skl_init_module(struct skl_sst *ctx, |
| struct skl_module_cfg *mconfig) |
| { |
| u16 module_config_size = 0; |
| void *param_data = NULL; |
| int ret; |
| struct skl_ipc_init_instance_msg msg; |
| |
| dev_dbg(ctx->dev, "%s: module_id = %d instance=%d\n", __func__, |
| mconfig->id.module_id, mconfig->id.pvt_id); |
| |
| if (mconfig->pipe->state != SKL_PIPE_CREATED) { |
| dev_err(ctx->dev, "Pipe not created state= %d pipe_id= %d\n", |
| mconfig->pipe->state, mconfig->pipe->ppl_id); |
| return -EIO; |
| } |
| |
| ret = skl_set_module_format(ctx, mconfig, |
| &module_config_size, ¶m_data); |
| if (ret < 0) { |
| dev_err(ctx->dev, "Failed to set module format ret=%d\n", ret); |
| return ret; |
| } |
| |
| msg.module_id = mconfig->id.module_id; |
| msg.instance_id = mconfig->id.pvt_id; |
| msg.ppl_instance_id = mconfig->pipe->ppl_id; |
| msg.param_data_size = module_config_size; |
| msg.core_id = mconfig->core_id; |
| msg.domain = mconfig->domain; |
| |
| ret = skl_ipc_init_instance(&ctx->ipc, &msg, param_data); |
| if (ret < 0) { |
| dev_err(ctx->dev, "Failed to init instance ret=%d\n", ret); |
| kfree(param_data); |
| return ret; |
| } |
| mconfig->m_state = SKL_MODULE_INIT_DONE; |
| kfree(param_data); |
| return ret; |
| } |
| |
| static void skl_dump_bind_info(struct skl_sst *ctx, struct skl_module_cfg |
| *src_module, struct skl_module_cfg *dst_module) |
| { |
| dev_dbg(ctx->dev, "%s: src module_id = %d src_instance=%d\n", |
| __func__, src_module->id.module_id, src_module->id.pvt_id); |
| dev_dbg(ctx->dev, "%s: dst_module=%d dst_instacne=%d\n", __func__, |
| dst_module->id.module_id, dst_module->id.pvt_id); |
| |
| dev_dbg(ctx->dev, "src_module state = %d dst module state = %d\n", |
| src_module->m_state, dst_module->m_state); |
| } |
| |
| /* |
| * On module freeup, we need to unbind the module with modules |
| * it is already bind. |
| * Find the pin allocated and unbind then using bind_unbind IPC |
| */ |
| int skl_unbind_modules(struct skl_sst *ctx, |
| struct skl_module_cfg *src_mcfg, |
| struct skl_module_cfg *dst_mcfg) |
| { |
| int ret; |
| struct skl_ipc_bind_unbind_msg msg; |
| struct skl_module_inst_id src_id = src_mcfg->id; |
| struct skl_module_inst_id dst_id = dst_mcfg->id; |
| int in_max = dst_mcfg->max_in_queue; |
| int out_max = src_mcfg->max_out_queue; |
| int src_index, dst_index, src_pin_state, dst_pin_state; |
| |
| skl_dump_bind_info(ctx, src_mcfg, dst_mcfg); |
| |
| /* get src queue index */ |
| src_index = skl_get_queue_index(src_mcfg->m_out_pin, dst_id, out_max); |
| if (src_index < 0) |
| return 0; |
| |
| msg.src_queue = src_index; |
| |
| /* get dst queue index */ |
| dst_index = skl_get_queue_index(dst_mcfg->m_in_pin, src_id, in_max); |
| if (dst_index < 0) |
| return 0; |
| |
| msg.dst_queue = dst_index; |
| |
| src_pin_state = src_mcfg->m_out_pin[src_index].pin_state; |
| dst_pin_state = dst_mcfg->m_in_pin[dst_index].pin_state; |
| |
| if (src_pin_state != SKL_PIN_BIND_DONE || |
| dst_pin_state != SKL_PIN_BIND_DONE) |
| return 0; |
| |
| msg.module_id = src_mcfg->id.module_id; |
| msg.instance_id = src_mcfg->id.pvt_id; |
| msg.dst_module_id = dst_mcfg->id.module_id; |
| msg.dst_instance_id = dst_mcfg->id.pvt_id; |
| msg.bind = false; |
| |
| ret = skl_ipc_bind_unbind(&ctx->ipc, &msg); |
| if (!ret) { |
| /* free queue only if unbind is success */ |
| skl_free_queue(src_mcfg->m_out_pin, src_index); |
| skl_free_queue(dst_mcfg->m_in_pin, dst_index); |
| |
| /* |
| * check only if src module bind state, bind is |
| * always from src -> sink |
| */ |
| skl_clear_module_state(src_mcfg->m_out_pin, out_max, src_mcfg); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Once a module is instantiated it need to be 'bind' with other modules in |
| * the pipeline. For binding we need to find the module pins which are bind |
| * together |
| * This function finds the pins and then sends bund_unbind IPC message to |
| * DSP using IPC helper |
| */ |
| int skl_bind_modules(struct skl_sst *ctx, |
| struct skl_module_cfg *src_mcfg, |
| struct skl_module_cfg *dst_mcfg) |
| { |
| int ret; |
| struct skl_ipc_bind_unbind_msg msg; |
| int in_max = dst_mcfg->max_in_queue; |
| int out_max = src_mcfg->max_out_queue; |
| int src_index, dst_index; |
| |
| skl_dump_bind_info(ctx, src_mcfg, dst_mcfg); |
| |
| if (src_mcfg->m_state < SKL_MODULE_INIT_DONE || |
| dst_mcfg->m_state < SKL_MODULE_INIT_DONE) |
| return 0; |
| |
| src_index = skl_alloc_queue(src_mcfg->m_out_pin, dst_mcfg, out_max); |
| if (src_index < 0) |
| return -EINVAL; |
| |
| msg.src_queue = src_index; |
| dst_index = skl_alloc_queue(dst_mcfg->m_in_pin, src_mcfg, in_max); |
| if (dst_index < 0) { |
| skl_free_queue(src_mcfg->m_out_pin, src_index); |
| return -EINVAL; |
| } |
| |
| msg.dst_queue = dst_index; |
| |
| dev_dbg(ctx->dev, "src queue = %d dst queue =%d\n", |
| msg.src_queue, msg.dst_queue); |
| |
| msg.module_id = src_mcfg->id.module_id; |
| msg.instance_id = src_mcfg->id.pvt_id; |
| msg.dst_module_id = dst_mcfg->id.module_id; |
| msg.dst_instance_id = dst_mcfg->id.pvt_id; |
| msg.bind = true; |
| |
| ret = skl_ipc_bind_unbind(&ctx->ipc, &msg); |
| |
| if (!ret) { |
| src_mcfg->m_state = SKL_MODULE_BIND_DONE; |
| src_mcfg->m_out_pin[src_index].pin_state = SKL_PIN_BIND_DONE; |
| dst_mcfg->m_in_pin[dst_index].pin_state = SKL_PIN_BIND_DONE; |
| } else { |
| /* error case , if IPC fails, clear the queue index */ |
| skl_free_queue(src_mcfg->m_out_pin, src_index); |
| skl_free_queue(dst_mcfg->m_in_pin, dst_index); |
| } |
| |
| return ret; |
| } |
| |
| static int skl_set_pipe_state(struct skl_sst *ctx, struct skl_pipe *pipe, |
| enum skl_ipc_pipeline_state state) |
| { |
| dev_dbg(ctx->dev, "%s: pipe_satate = %d\n", __func__, state); |
| |
| return skl_ipc_set_pipeline_state(&ctx->ipc, pipe->ppl_id, state); |
| } |
| |
| /* |
| * A pipeline is a collection of modules. Before a module in instantiated a |
| * pipeline needs to be created for it. |
| * This function creates pipeline, by sending create pipeline IPC messages |
| * to FW |
| */ |
| int skl_create_pipeline(struct skl_sst *ctx, struct skl_pipe *pipe) |
| { |
| int ret; |
| |
| dev_dbg(ctx->dev, "%s: pipe_id = %d\n", __func__, pipe->ppl_id); |
| |
| ret = skl_ipc_create_pipeline(&ctx->ipc, pipe->memory_pages, |
| pipe->pipe_priority, pipe->ppl_id, |
| pipe->lp_mode); |
| if (ret < 0) { |
| dev_err(ctx->dev, "Failed to create pipeline\n"); |
| return ret; |
| } |
| |
| pipe->state = SKL_PIPE_CREATED; |
| |
| return 0; |
| } |
| |
| /* |
| * A pipeline needs to be deleted on cleanup. If a pipeline is running, then |
| * pause the pipeline first and then delete it |
| * The pipe delete is done by sending delete pipeline IPC. DSP will stop the |
| * DMA engines and releases resources |
| */ |
| int skl_delete_pipe(struct skl_sst *ctx, struct skl_pipe *pipe) |
| { |
| int ret; |
| |
| dev_dbg(ctx->dev, "%s: pipe = %d\n", __func__, pipe->ppl_id); |
| |
| /* If pipe is started, do stop the pipe in FW. */ |
| if (pipe->state >= SKL_PIPE_STARTED) { |
| ret = skl_set_pipe_state(ctx, pipe, PPL_PAUSED); |
| if (ret < 0) { |
| dev_err(ctx->dev, "Failed to stop pipeline\n"); |
| return ret; |
| } |
| |
| pipe->state = SKL_PIPE_PAUSED; |
| } |
| |
| /* If pipe was not created in FW, do not try to delete it */ |
| if (pipe->state < SKL_PIPE_CREATED) |
| return 0; |
| |
| ret = skl_ipc_delete_pipeline(&ctx->ipc, pipe->ppl_id); |
| if (ret < 0) { |
| dev_err(ctx->dev, "Failed to delete pipeline\n"); |
| return ret; |
| } |
| |
| pipe->state = SKL_PIPE_INVALID; |
| |
| return ret; |
| } |
| |
| /* |
| * A pipeline is also a scheduling entity in DSP which can be run, stopped |
| * For processing data the pipe need to be run by sending IPC set pipe state |
| * to DSP |
| */ |
| int skl_run_pipe(struct skl_sst *ctx, struct skl_pipe *pipe) |
| { |
| int ret; |
| |
| dev_dbg(ctx->dev, "%s: pipe = %d\n", __func__, pipe->ppl_id); |
| |
| /* If pipe was not created in FW, do not try to pause or delete */ |
| if (pipe->state < SKL_PIPE_CREATED) |
| return 0; |
| |
| /* Pipe has to be paused before it is started */ |
| ret = skl_set_pipe_state(ctx, pipe, PPL_PAUSED); |
| if (ret < 0) { |
| dev_err(ctx->dev, "Failed to pause pipe\n"); |
| return ret; |
| } |
| |
| pipe->state = SKL_PIPE_PAUSED; |
| |
| ret = skl_set_pipe_state(ctx, pipe, PPL_RUNNING); |
| if (ret < 0) { |
| dev_err(ctx->dev, "Failed to start pipe\n"); |
| return ret; |
| } |
| |
| pipe->state = SKL_PIPE_STARTED; |
| |
| return 0; |
| } |
| |
| /* |
| * Stop the pipeline by sending set pipe state IPC |
| * DSP doesnt implement stop so we always send pause message |
| */ |
| int skl_stop_pipe(struct skl_sst *ctx, struct skl_pipe *pipe) |
| { |
| int ret; |
| |
| dev_dbg(ctx->dev, "In %s pipe=%d\n", __func__, pipe->ppl_id); |
| |
| /* If pipe was not created in FW, do not try to pause or delete */ |
| if (pipe->state < SKL_PIPE_PAUSED) |
| return 0; |
| |
| ret = skl_set_pipe_state(ctx, pipe, PPL_PAUSED); |
| if (ret < 0) { |
| dev_dbg(ctx->dev, "Failed to stop pipe\n"); |
| return ret; |
| } |
| |
| pipe->state = SKL_PIPE_PAUSED; |
| |
| return 0; |
| } |
| |
| /* |
| * Reset the pipeline by sending set pipe state IPC this will reset the DMA |
| * from the DSP side |
| */ |
| int skl_reset_pipe(struct skl_sst *ctx, struct skl_pipe *pipe) |
| { |
| int ret; |
| |
| /* If pipe was not created in FW, do not try to pause or delete */ |
| if (pipe->state < SKL_PIPE_PAUSED) |
| return 0; |
| |
| ret = skl_set_pipe_state(ctx, pipe, PPL_RESET); |
| if (ret < 0) { |
| dev_dbg(ctx->dev, "Failed to reset pipe ret=%d\n", ret); |
| return ret; |
| } |
| |
| pipe->state = SKL_PIPE_RESET; |
| |
| return 0; |
| } |
| |
| /* Algo parameter set helper function */ |
| int skl_set_module_params(struct skl_sst *ctx, u32 *params, int size, |
| u32 param_id, struct skl_module_cfg *mcfg) |
| { |
| struct skl_ipc_large_config_msg msg; |
| |
| msg.module_id = mcfg->id.module_id; |
| msg.instance_id = mcfg->id.pvt_id; |
| msg.param_data_size = size; |
| msg.large_param_id = param_id; |
| |
| return skl_ipc_set_large_config(&ctx->ipc, &msg, params); |
| } |
| |
| int skl_get_module_params(struct skl_sst *ctx, u32 *params, int size, |
| u32 param_id, struct skl_module_cfg *mcfg) |
| { |
| struct skl_ipc_large_config_msg msg; |
| |
| msg.module_id = mcfg->id.module_id; |
| msg.instance_id = mcfg->id.pvt_id; |
| msg.param_data_size = size; |
| msg.large_param_id = param_id; |
| |
| return skl_ipc_get_large_config(&ctx->ipc, &msg, params); |
| } |