| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * vgic init sequence tests |
| * |
| * Copyright (C) 2020, Red Hat, Inc. |
| */ |
| #define _GNU_SOURCE |
| #include <linux/kernel.h> |
| #include <sys/syscall.h> |
| #include <asm/kvm.h> |
| #include <asm/kvm_para.h> |
| |
| #include "test_util.h" |
| #include "kvm_util.h" |
| #include "processor.h" |
| |
| #define NR_VCPUS 4 |
| |
| #define REDIST_REGION_ATTR_ADDR(count, base, flags, index) (((uint64_t)(count) << 52) | \ |
| ((uint64_t)((base) >> 16) << 16) | ((uint64_t)(flags) << 12) | index) |
| #define REG_OFFSET(vcpu, offset) (((uint64_t)vcpu << 32) | offset) |
| |
| #define GICR_TYPER 0x8 |
| |
| struct vm_gic { |
| struct kvm_vm *vm; |
| int gic_fd; |
| }; |
| |
| static int max_ipa_bits; |
| |
| /* helper to access a redistributor register */ |
| static int access_redist_reg(int gicv3_fd, int vcpu, int offset, |
| uint32_t *val, bool write) |
| { |
| uint64_t attr = REG_OFFSET(vcpu, offset); |
| |
| return _kvm_device_access(gicv3_fd, KVM_DEV_ARM_VGIC_GRP_REDIST_REGS, |
| attr, val, write); |
| } |
| |
| /* dummy guest code */ |
| static void guest_code(void) |
| { |
| GUEST_SYNC(0); |
| GUEST_SYNC(1); |
| GUEST_SYNC(2); |
| GUEST_DONE(); |
| } |
| |
| /* we don't want to assert on run execution, hence that helper */ |
| static int run_vcpu(struct kvm_vm *vm, uint32_t vcpuid) |
| { |
| ucall_init(vm, NULL); |
| int ret = _vcpu_ioctl(vm, vcpuid, KVM_RUN, NULL); |
| if (ret) |
| return -errno; |
| return 0; |
| } |
| |
| static struct vm_gic vm_gic_create(void) |
| { |
| struct vm_gic v; |
| |
| v.vm = vm_create_default_with_vcpus(NR_VCPUS, 0, 0, guest_code, NULL); |
| v.gic_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false); |
| |
| return v; |
| } |
| |
| static void vm_gic_destroy(struct vm_gic *v) |
| { |
| close(v->gic_fd); |
| kvm_vm_free(v->vm); |
| } |
| |
| /** |
| * Helper routine that performs KVM device tests in general and |
| * especially ARM_VGIC_V3 ones. Eventually the ARM_VGIC_V3 |
| * device gets created, a legacy RDIST region is set at @0x0 |
| * and a DIST region is set @0x60000 |
| */ |
| static void subtest_dist_rdist(struct vm_gic *v) |
| { |
| int ret; |
| uint64_t addr; |
| |
| /* Check existing group/attributes */ |
| kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_DIST); |
| |
| kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST); |
| |
| /* check non existing attribute */ |
| ret = _kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, 0); |
| TEST_ASSERT(ret && errno == ENXIO, "attribute not supported"); |
| |
| /* misaligned DIST and REDIST address settings */ |
| addr = 0x1000; |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_DIST, &addr, true); |
| TEST_ASSERT(ret && errno == EINVAL, "GICv3 dist base not 64kB aligned"); |
| |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true); |
| TEST_ASSERT(ret && errno == EINVAL, "GICv3 redist base not 64kB aligned"); |
| |
| /* out of range address */ |
| if (max_ipa_bits) { |
| addr = 1ULL << max_ipa_bits; |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_DIST, &addr, true); |
| TEST_ASSERT(ret && errno == E2BIG, "dist address beyond IPA limit"); |
| |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true); |
| TEST_ASSERT(ret && errno == E2BIG, "redist address beyond IPA limit"); |
| } |
| |
| /* set REDIST base address @0x0*/ |
| addr = 0x00000; |
| kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true); |
| |
| /* Attempt to create a second legacy redistributor region */ |
| addr = 0xE0000; |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true); |
| TEST_ASSERT(ret && errno == EEXIST, "GICv3 redist base set again"); |
| |
| /* Attempt to mix legacy and new redistributor regions */ |
| addr = REDIST_REGION_ATTR_ADDR(NR_VCPUS, 0x100000, 0, 0); |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| TEST_ASSERT(ret && errno == EINVAL, "attempt to mix GICv3 REDIST and REDIST_REGION"); |
| |
| /* |
| * Set overlapping DIST / REDIST, cannot be detected here. Will be detected |
| * on first vcpu run instead. |
| */ |
| addr = 3 * 2 * 0x10000; |
| kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, KVM_VGIC_V3_ADDR_TYPE_DIST, |
| &addr, true); |
| } |
| |
| /* Test the new REDIST region API */ |
| static void subtest_redist_regions(struct vm_gic *v) |
| { |
| uint64_t addr, expected_addr; |
| int ret; |
| |
| ret = kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST); |
| TEST_ASSERT(!ret, "Multiple redist regions advertised"); |
| |
| addr = REDIST_REGION_ATTR_ADDR(NR_VCPUS, 0x100000, 2, 0); |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| TEST_ASSERT(ret && errno == EINVAL, "redist region attr value with flags != 0"); |
| |
| addr = REDIST_REGION_ATTR_ADDR(0, 0x100000, 0, 0); |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| TEST_ASSERT(ret && errno == EINVAL, "redist region attr value with count== 0"); |
| |
| addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 1); |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| TEST_ASSERT(ret && errno == EINVAL, |
| "attempt to register the first rdist region with index != 0"); |
| |
| addr = REDIST_REGION_ATTR_ADDR(2, 0x201000, 0, 1); |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| TEST_ASSERT(ret && errno == EINVAL, "rdist region with misaligned address"); |
| |
| addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 0); |
| kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| |
| addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 1); |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| TEST_ASSERT(ret && errno == EINVAL, "register an rdist region with already used index"); |
| |
| addr = REDIST_REGION_ATTR_ADDR(1, 0x210000, 0, 2); |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| TEST_ASSERT(ret && errno == EINVAL, |
| "register an rdist region overlapping with another one"); |
| |
| addr = REDIST_REGION_ATTR_ADDR(1, 0x240000, 0, 2); |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| TEST_ASSERT(ret && errno == EINVAL, "register redist region with index not +1"); |
| |
| addr = REDIST_REGION_ATTR_ADDR(1, 0x240000, 0, 1); |
| kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| |
| addr = REDIST_REGION_ATTR_ADDR(1, 1ULL << max_ipa_bits, 0, 2); |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| TEST_ASSERT(ret && errno == E2BIG, |
| "register redist region with base address beyond IPA range"); |
| |
| addr = 0x260000; |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true); |
| TEST_ASSERT(ret && errno == EINVAL, |
| "Mix KVM_VGIC_V3_ADDR_TYPE_REDIST and REDIST_REGION"); |
| |
| /* |
| * Now there are 2 redist regions: |
| * region 0 @ 0x200000 2 redists |
| * region 1 @ 0x240000 1 redist |
| * Attempt to read their characteristics |
| */ |
| |
| addr = REDIST_REGION_ATTR_ADDR(0, 0, 0, 0); |
| expected_addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 0); |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, false); |
| TEST_ASSERT(!ret && addr == expected_addr, "read characteristics of region #0"); |
| |
| addr = REDIST_REGION_ATTR_ADDR(0, 0, 0, 1); |
| expected_addr = REDIST_REGION_ATTR_ADDR(1, 0x240000, 0, 1); |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, false); |
| TEST_ASSERT(!ret && addr == expected_addr, "read characteristics of region #1"); |
| |
| addr = REDIST_REGION_ATTR_ADDR(0, 0, 0, 2); |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, false); |
| TEST_ASSERT(ret && errno == ENOENT, "read characteristics of non existing region"); |
| |
| addr = 0x260000; |
| kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_DIST, &addr, true); |
| |
| addr = REDIST_REGION_ATTR_ADDR(1, 0x260000, 0, 2); |
| ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| TEST_ASSERT(ret && errno == EINVAL, "register redist region colliding with dist"); |
| } |
| |
| /* |
| * VGIC KVM device is created and initialized before the secondary CPUs |
| * get created |
| */ |
| static void test_vgic_then_vcpus(void) |
| { |
| struct vm_gic v; |
| int ret, i; |
| |
| v.vm = vm_create_default(0, 0, guest_code); |
| v.gic_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false); |
| |
| subtest_dist_rdist(&v); |
| |
| /* Add the rest of the VCPUs */ |
| for (i = 1; i < NR_VCPUS; ++i) |
| vm_vcpu_add_default(v.vm, i, guest_code); |
| |
| ret = run_vcpu(v.vm, 3); |
| TEST_ASSERT(ret == -EINVAL, "dist/rdist overlap detected on 1st vcpu run"); |
| |
| vm_gic_destroy(&v); |
| } |
| |
| /* All the VCPUs are created before the VGIC KVM device gets initialized */ |
| static void test_vcpus_then_vgic(void) |
| { |
| struct vm_gic v; |
| int ret; |
| |
| v = vm_gic_create(); |
| |
| subtest_dist_rdist(&v); |
| |
| ret = run_vcpu(v.vm, 3); |
| TEST_ASSERT(ret == -EINVAL, "dist/rdist overlap detected on 1st vcpu run"); |
| |
| vm_gic_destroy(&v); |
| } |
| |
| static void test_new_redist_regions(void) |
| { |
| void *dummy = NULL; |
| struct vm_gic v; |
| uint64_t addr; |
| int ret; |
| |
| v = vm_gic_create(); |
| subtest_redist_regions(&v); |
| kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, |
| KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true); |
| |
| ret = run_vcpu(v.vm, 3); |
| TEST_ASSERT(ret == -ENXIO, "running without sufficient number of rdists"); |
| vm_gic_destroy(&v); |
| |
| /* step2 */ |
| |
| v = vm_gic_create(); |
| subtest_redist_regions(&v); |
| |
| addr = REDIST_REGION_ATTR_ADDR(1, 0x280000, 0, 2); |
| kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| |
| ret = run_vcpu(v.vm, 3); |
| TEST_ASSERT(ret == -EBUSY, "running without vgic explicit init"); |
| |
| vm_gic_destroy(&v); |
| |
| /* step 3 */ |
| |
| v = vm_gic_create(); |
| subtest_redist_regions(&v); |
| |
| _kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, dummy, true); |
| TEST_ASSERT(ret && errno == EFAULT, |
| "register a third region allowing to cover the 4 vcpus"); |
| |
| addr = REDIST_REGION_ATTR_ADDR(1, 0x280000, 0, 2); |
| kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| |
| kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, |
| KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true); |
| |
| ret = run_vcpu(v.vm, 3); |
| TEST_ASSERT(!ret, "vcpu run"); |
| |
| vm_gic_destroy(&v); |
| } |
| |
| static void test_typer_accesses(void) |
| { |
| struct vm_gic v; |
| uint64_t addr; |
| uint32_t val; |
| int ret, i; |
| |
| v.vm = vm_create_default(0, 0, guest_code); |
| |
| v.gic_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false); |
| |
| vm_vcpu_add_default(v.vm, 3, guest_code); |
| |
| ret = access_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); |
| TEST_ASSERT(ret && errno == EINVAL, "attempting to read GICR_TYPER of non created vcpu"); |
| |
| vm_vcpu_add_default(v.vm, 1, guest_code); |
| |
| ret = access_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); |
| TEST_ASSERT(ret && errno == EBUSY, "read GICR_TYPER before GIC initialized"); |
| |
| vm_vcpu_add_default(v.vm, 2, guest_code); |
| |
| kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, |
| KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true); |
| |
| for (i = 0; i < NR_VCPUS ; i++) { |
| ret = access_redist_reg(v.gic_fd, 0, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && !val, "read GICR_TYPER before rdist region setting"); |
| } |
| |
| addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 0); |
| kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| |
| /* The 2 first rdists should be put there (vcpu 0 and 3) */ |
| ret = access_redist_reg(v.gic_fd, 0, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && !val, "read typer of rdist #0"); |
| |
| ret = access_redist_reg(v.gic_fd, 3, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x310, "read typer of rdist #1"); |
| |
| addr = REDIST_REGION_ATTR_ADDR(10, 0x100000, 0, 1); |
| ret = _kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| TEST_ASSERT(ret && errno == EINVAL, "collision with previous rdist region"); |
| |
| ret = access_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x100, |
| "no redist region attached to vcpu #1 yet, last cannot be returned"); |
| |
| ret = access_redist_reg(v.gic_fd, 2, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x200, |
| "no redist region attached to vcpu #2, last cannot be returned"); |
| |
| addr = REDIST_REGION_ATTR_ADDR(10, 0x20000, 0, 1); |
| kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| |
| ret = access_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x100, "read typer of rdist #1"); |
| |
| ret = access_redist_reg(v.gic_fd, 2, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x210, |
| "read typer of rdist #1, last properly returned"); |
| |
| vm_gic_destroy(&v); |
| } |
| |
| /** |
| * Test GICR_TYPER last bit with new redist regions |
| * rdist regions #1 and #2 are contiguous |
| * rdist region #0 @0x100000 2 rdist capacity |
| * rdists: 0, 3 (Last) |
| * rdist region #1 @0x240000 2 rdist capacity |
| * rdists: 5, 4 (Last) |
| * rdist region #2 @0x200000 2 rdist capacity |
| * rdists: 1, 2 |
| */ |
| static void test_last_bit_redist_regions(void) |
| { |
| uint32_t vcpuids[] = { 0, 3, 5, 4, 1, 2 }; |
| struct vm_gic v; |
| uint64_t addr; |
| uint32_t val; |
| int ret; |
| |
| v.vm = vm_create_default_with_vcpus(6, 0, 0, guest_code, vcpuids); |
| |
| v.gic_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false); |
| |
| kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, |
| KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true); |
| |
| addr = REDIST_REGION_ATTR_ADDR(2, 0x100000, 0, 0); |
| kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| |
| addr = REDIST_REGION_ATTR_ADDR(2, 0x240000, 0, 1); |
| kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| |
| addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 2); |
| kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); |
| |
| ret = access_redist_reg(v.gic_fd, 0, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x000, "read typer of rdist #0"); |
| |
| ret = access_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x100, "read typer of rdist #1"); |
| |
| ret = access_redist_reg(v.gic_fd, 2, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x200, "read typer of rdist #2"); |
| |
| ret = access_redist_reg(v.gic_fd, 3, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x310, "read typer of rdist #3"); |
| |
| ret = access_redist_reg(v.gic_fd, 5, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x500, "read typer of rdist #5"); |
| |
| ret = access_redist_reg(v.gic_fd, 4, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x410, "read typer of rdist #4"); |
| |
| vm_gic_destroy(&v); |
| } |
| |
| /* Test last bit with legacy region */ |
| static void test_last_bit_single_rdist(void) |
| { |
| uint32_t vcpuids[] = { 0, 3, 5, 4, 1, 2 }; |
| struct vm_gic v; |
| uint64_t addr; |
| uint32_t val; |
| int ret; |
| |
| v.vm = vm_create_default_with_vcpus(6, 0, 0, guest_code, vcpuids); |
| |
| v.gic_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false); |
| |
| kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, |
| KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true); |
| |
| addr = 0x10000; |
| kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true); |
| |
| ret = access_redist_reg(v.gic_fd, 0, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x000, "read typer of rdist #0"); |
| |
| ret = access_redist_reg(v.gic_fd, 3, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x300, "read typer of rdist #1"); |
| |
| ret = access_redist_reg(v.gic_fd, 5, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x500, "read typer of rdist #2"); |
| |
| ret = access_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x100, "read typer of rdist #3"); |
| |
| ret = access_redist_reg(v.gic_fd, 2, GICR_TYPER, &val, false); |
| TEST_ASSERT(!ret && val == 0x210, "read typer of rdist #3"); |
| |
| vm_gic_destroy(&v); |
| } |
| |
| void test_kvm_device(void) |
| { |
| struct vm_gic v; |
| int ret, fd; |
| |
| v.vm = vm_create_default_with_vcpus(NR_VCPUS, 0, 0, guest_code, NULL); |
| |
| /* try to create a non existing KVM device */ |
| ret = _kvm_create_device(v.vm, 0, true, &fd); |
| TEST_ASSERT(ret && errno == ENODEV, "unsupported device"); |
| |
| /* trial mode with VGIC_V3 device */ |
| ret = _kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, true, &fd); |
| if (ret) { |
| print_skip("GICv3 not supported"); |
| exit(KSFT_SKIP); |
| } |
| v.gic_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false); |
| |
| ret = _kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false, &fd); |
| TEST_ASSERT(ret && errno == EEXIST, "create GICv3 device twice"); |
| |
| kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, true); |
| |
| if (!_kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V2, true, &fd)) { |
| ret = _kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V2, false, &fd); |
| TEST_ASSERT(ret && errno == EINVAL, "create GICv2 while v3 exists"); |
| } |
| |
| vm_gic_destroy(&v); |
| } |
| |
| int main(int ac, char **av) |
| { |
| max_ipa_bits = kvm_check_cap(KVM_CAP_ARM_VM_IPA_SIZE); |
| |
| test_kvm_device(); |
| test_vcpus_then_vgic(); |
| test_vgic_then_vcpus(); |
| test_new_redist_regions(); |
| test_typer_accesses(); |
| test_last_bit_redist_regions(); |
| test_last_bit_single_rdist(); |
| |
| return 0; |
| } |