| // SPDX-License-Identifier: GPL-2.0 |
| |
| /* |
| * Copyright 2016-2019 HabanaLabs, Ltd. |
| * All Rights Reserved. |
| */ |
| |
| #include "habanalabs.h" |
| |
| #include <linux/slab.h> |
| |
| /* |
| * hl_queue_add_ptr - add to pi or ci and checks if it wraps around |
| * |
| * @ptr: the current pi/ci value |
| * @val: the amount to add |
| * |
| * Add val to ptr. It can go until twice the queue length. |
| */ |
| inline u32 hl_hw_queue_add_ptr(u32 ptr, u16 val) |
| { |
| ptr += val; |
| ptr &= ((HL_QUEUE_LENGTH << 1) - 1); |
| return ptr; |
| } |
| |
| static inline int queue_free_slots(struct hl_hw_queue *q, u32 queue_len) |
| { |
| int delta = (q->pi - q->ci); |
| |
| if (delta >= 0) |
| return (queue_len - delta); |
| else |
| return (abs(delta) - queue_len); |
| } |
| |
| /* |
| * ext_queue_submit_bd - Submit a buffer descriptor to an external queue |
| * |
| * @hdev: pointer to habanalabs device structure |
| * @q: pointer to habanalabs queue structure |
| * @ctl: BD's control word |
| * @len: BD's length |
| * @ptr: BD's pointer |
| * |
| * This function assumes there is enough space on the queue to submit a new |
| * BD to it. It initializes the next BD and calls the device specific |
| * function to set the pi (and doorbell) |
| * |
| * This function must be called when the scheduler mutex is taken |
| * |
| */ |
| static void ext_queue_submit_bd(struct hl_device *hdev, struct hl_hw_queue *q, |
| u32 ctl, u32 len, u64 ptr) |
| { |
| struct hl_bd *bd; |
| |
| bd = (struct hl_bd *) (uintptr_t) q->kernel_address; |
| bd += hl_pi_2_offset(q->pi); |
| bd->ctl = ctl; |
| bd->len = len; |
| bd->ptr = ptr + hdev->asic_prop.host_phys_base_address; |
| |
| q->pi = hl_queue_inc_ptr(q->pi); |
| hdev->asic_funcs->ring_doorbell(hdev, q->hw_queue_id, q->pi); |
| } |
| |
| /* |
| * ext_queue_sanity_checks - perform some sanity checks on external queue |
| * |
| * @hdev : pointer to hl_device structure |
| * @q : pointer to hl_hw_queue structure |
| * @num_of_entries : how many entries to check for space |
| * @reserve_cq_entry : whether to reserve an entry in the cq |
| * |
| * H/W queues spinlock should be taken before calling this function |
| * |
| * Perform the following: |
| * - Make sure we have enough space in the h/w queue |
| * - Make sure we have enough space in the completion queue |
| * - Reserve space in the completion queue (needs to be reversed if there |
| * is a failure down the road before the actual submission of work). Only |
| * do this action if reserve_cq_entry is true |
| * |
| */ |
| static int ext_queue_sanity_checks(struct hl_device *hdev, |
| struct hl_hw_queue *q, int num_of_entries, |
| bool reserve_cq_entry) |
| { |
| atomic_t *free_slots = |
| &hdev->completion_queue[q->hw_queue_id].free_slots_cnt; |
| int free_slots_cnt; |
| |
| /* Check we have enough space in the queue */ |
| free_slots_cnt = queue_free_slots(q, HL_QUEUE_LENGTH); |
| |
| if (free_slots_cnt < num_of_entries) { |
| dev_dbg(hdev->dev, "Queue %d doesn't have room for %d CBs\n", |
| q->hw_queue_id, num_of_entries); |
| return -EAGAIN; |
| } |
| |
| if (reserve_cq_entry) { |
| /* |
| * Check we have enough space in the completion queue |
| * Add -1 to counter (decrement) unless counter was already 0 |
| * In that case, CQ is full so we can't submit a new CB because |
| * we won't get ack on its completion |
| * atomic_add_unless will return 0 if counter was already 0 |
| */ |
| if (atomic_add_negative(num_of_entries * -1, free_slots)) { |
| dev_dbg(hdev->dev, "No space for %d on CQ %d\n", |
| num_of_entries, q->hw_queue_id); |
| atomic_add(num_of_entries, free_slots); |
| return -EAGAIN; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * hl_hw_queue_send_cb_no_cmpl - send a single CB (not a JOB) without completion |
| * |
| * @hdev: pointer to hl_device structure |
| * @hw_queue_id: Queue's type |
| * @cb_size: size of CB |
| * @cb_ptr: pointer to CB location |
| * |
| * This function sends a single CB, that must NOT generate a completion entry |
| * |
| */ |
| int hl_hw_queue_send_cb_no_cmpl(struct hl_device *hdev, u32 hw_queue_id, |
| u32 cb_size, u64 cb_ptr) |
| { |
| struct hl_hw_queue *q = &hdev->kernel_queues[hw_queue_id]; |
| int rc; |
| |
| /* |
| * The CPU queue is a synchronous queue with an effective depth of |
| * a single entry (although it is allocated with room for multiple |
| * entries). Therefore, there is a different lock, called |
| * send_cpu_message_lock, that serializes accesses to the CPU queue. |
| * As a result, we don't need to lock the access to the entire H/W |
| * queues module when submitting a JOB to the CPU queue |
| */ |
| if (q->queue_type != QUEUE_TYPE_CPU) |
| hdev->asic_funcs->hw_queues_lock(hdev); |
| |
| if (hdev->disabled) { |
| rc = -EPERM; |
| goto out; |
| } |
| |
| rc = ext_queue_sanity_checks(hdev, q, 1, false); |
| if (rc) |
| goto out; |
| |
| ext_queue_submit_bd(hdev, q, 0, cb_size, cb_ptr); |
| |
| out: |
| if (q->queue_type != QUEUE_TYPE_CPU) |
| hdev->asic_funcs->hw_queues_unlock(hdev); |
| |
| return rc; |
| } |
| |
| /* |
| * hl_hw_queue_inc_ci_kernel - increment ci for kernel's queue |
| * |
| * @hdev: pointer to hl_device structure |
| * @hw_queue_id: which queue to increment its ci |
| */ |
| void hl_hw_queue_inc_ci_kernel(struct hl_device *hdev, u32 hw_queue_id) |
| { |
| struct hl_hw_queue *q = &hdev->kernel_queues[hw_queue_id]; |
| |
| q->ci = hl_queue_inc_ptr(q->ci); |
| } |
| |
| static int ext_and_cpu_hw_queue_init(struct hl_device *hdev, |
| struct hl_hw_queue *q) |
| { |
| void *p; |
| int rc; |
| |
| p = hdev->asic_funcs->dma_alloc_coherent(hdev, |
| HL_QUEUE_SIZE_IN_BYTES, |
| &q->bus_address, GFP_KERNEL | __GFP_ZERO); |
| if (!p) |
| return -ENOMEM; |
| |
| q->kernel_address = (u64) (uintptr_t) p; |
| |
| q->shadow_queue = kmalloc_array(HL_QUEUE_LENGTH, |
| sizeof(*q->shadow_queue), |
| GFP_KERNEL); |
| if (!q->shadow_queue) { |
| dev_err(hdev->dev, |
| "Failed to allocate shadow queue for H/W queue %d\n", |
| q->hw_queue_id); |
| rc = -ENOMEM; |
| goto free_queue; |
| } |
| |
| /* Make sure read/write pointers are initialized to start of queue */ |
| q->ci = 0; |
| q->pi = 0; |
| |
| return 0; |
| |
| free_queue: |
| hdev->asic_funcs->dma_free_coherent(hdev, HL_QUEUE_SIZE_IN_BYTES, |
| (void *) (uintptr_t) q->kernel_address, q->bus_address); |
| |
| return rc; |
| } |
| |
| static int int_hw_queue_init(struct hl_device *hdev, struct hl_hw_queue *q) |
| { |
| void *p; |
| |
| p = hdev->asic_funcs->get_int_queue_base(hdev, q->hw_queue_id, |
| &q->bus_address, &q->int_queue_len); |
| if (!p) { |
| dev_err(hdev->dev, |
| "Failed to get base address for internal queue %d\n", |
| q->hw_queue_id); |
| return -EFAULT; |
| } |
| |
| q->kernel_address = (u64) (uintptr_t) p; |
| q->pi = 0; |
| q->ci = 0; |
| |
| return 0; |
| } |
| |
| static int cpu_hw_queue_init(struct hl_device *hdev, struct hl_hw_queue *q) |
| { |
| return ext_and_cpu_hw_queue_init(hdev, q); |
| } |
| |
| static int ext_hw_queue_init(struct hl_device *hdev, struct hl_hw_queue *q) |
| { |
| return ext_and_cpu_hw_queue_init(hdev, q); |
| } |
| |
| /* |
| * hw_queue_init - main initialization function for H/W queue object |
| * |
| * @hdev: pointer to hl_device device structure |
| * @q: pointer to hl_hw_queue queue structure |
| * @hw_queue_id: The id of the H/W queue |
| * |
| * Allocate dma-able memory for the queue and initialize fields |
| * Returns 0 on success |
| */ |
| static int hw_queue_init(struct hl_device *hdev, struct hl_hw_queue *q, |
| u32 hw_queue_id) |
| { |
| int rc; |
| |
| BUILD_BUG_ON(HL_QUEUE_SIZE_IN_BYTES > HL_PAGE_SIZE); |
| |
| q->hw_queue_id = hw_queue_id; |
| |
| switch (q->queue_type) { |
| case QUEUE_TYPE_EXT: |
| rc = ext_hw_queue_init(hdev, q); |
| break; |
| |
| case QUEUE_TYPE_INT: |
| rc = int_hw_queue_init(hdev, q); |
| break; |
| |
| case QUEUE_TYPE_CPU: |
| rc = cpu_hw_queue_init(hdev, q); |
| break; |
| |
| case QUEUE_TYPE_NA: |
| q->valid = 0; |
| return 0; |
| |
| default: |
| dev_crit(hdev->dev, "wrong queue type %d during init\n", |
| q->queue_type); |
| rc = -EINVAL; |
| break; |
| } |
| |
| if (rc) |
| return rc; |
| |
| q->valid = 1; |
| |
| return 0; |
| } |
| |
| /* |
| * hw_queue_fini - destroy queue |
| * |
| * @hdev: pointer to hl_device device structure |
| * @q: pointer to hl_hw_queue queue structure |
| * |
| * Free the queue memory |
| */ |
| static void hw_queue_fini(struct hl_device *hdev, struct hl_hw_queue *q) |
| { |
| if (!q->valid) |
| return; |
| |
| /* |
| * If we arrived here, there are no jobs waiting on this queue |
| * so we can safely remove it. |
| * This is because this function can only called when: |
| * 1. Either a context is deleted, which only can occur if all its |
| * jobs were finished |
| * 2. A context wasn't able to be created due to failure or timeout, |
| * which means there are no jobs on the queue yet |
| * |
| * The only exception are the queues of the kernel context, but |
| * if they are being destroyed, it means that the entire module is |
| * being removed. If the module is removed, it means there is no open |
| * user context. It also means that if a job was submitted by |
| * the kernel driver (e.g. context creation), the job itself was |
| * released by the kernel driver when a timeout occurred on its |
| * Completion. Thus, we don't need to release it again. |
| */ |
| |
| if (q->queue_type == QUEUE_TYPE_INT) |
| return; |
| |
| kfree(q->shadow_queue); |
| |
| hdev->asic_funcs->dma_free_coherent(hdev, HL_QUEUE_SIZE_IN_BYTES, |
| (void *) (uintptr_t) q->kernel_address, q->bus_address); |
| } |
| |
| int hl_hw_queues_create(struct hl_device *hdev) |
| { |
| struct asic_fixed_properties *asic = &hdev->asic_prop; |
| struct hl_hw_queue *q; |
| int i, rc, q_ready_cnt; |
| |
| hdev->kernel_queues = kcalloc(HL_MAX_QUEUES, |
| sizeof(*hdev->kernel_queues), GFP_KERNEL); |
| |
| if (!hdev->kernel_queues) { |
| dev_err(hdev->dev, "Not enough memory for H/W queues\n"); |
| return -ENOMEM; |
| } |
| |
| /* Initialize the H/W queues */ |
| for (i = 0, q_ready_cnt = 0, q = hdev->kernel_queues; |
| i < HL_MAX_QUEUES ; i++, q_ready_cnt++, q++) { |
| |
| q->queue_type = asic->hw_queues_props[i].type; |
| rc = hw_queue_init(hdev, q, i); |
| if (rc) { |
| dev_err(hdev->dev, |
| "failed to initialize queue %d\n", i); |
| goto release_queues; |
| } |
| } |
| |
| return 0; |
| |
| release_queues: |
| for (i = 0, q = hdev->kernel_queues ; i < q_ready_cnt ; i++, q++) |
| hw_queue_fini(hdev, q); |
| |
| kfree(hdev->kernel_queues); |
| |
| return rc; |
| } |
| |
| void hl_hw_queues_destroy(struct hl_device *hdev) |
| { |
| struct hl_hw_queue *q; |
| int i; |
| |
| for (i = 0, q = hdev->kernel_queues ; i < HL_MAX_QUEUES ; i++, q++) |
| hw_queue_fini(hdev, q); |
| |
| kfree(hdev->kernel_queues); |
| } |
| |
| void hl_hw_queue_reset(struct hl_device *hdev, bool hard_reset) |
| { |
| struct hl_hw_queue *q; |
| int i; |
| |
| for (i = 0, q = hdev->kernel_queues ; i < HL_MAX_QUEUES ; i++, q++) { |
| if ((!q->valid) || |
| ((!hard_reset) && (q->queue_type == QUEUE_TYPE_CPU))) |
| continue; |
| q->pi = q->ci = 0; |
| } |
| } |