| /* SPDX-License-Identifier: GPL-2.0 */ |
| |
| #ifndef OCC_COMMON_H |
| #define OCC_COMMON_H |
| |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/mutex.h> |
| #include <linux/sysfs.h> |
| |
| struct device; |
| |
| #define OCC_RESP_DATA_BYTES 4089 |
| |
| /* |
| * Same response format for all OCC versions. |
| * Allocate the largest possible response. |
| */ |
| struct occ_response { |
| u8 seq_no; |
| u8 cmd_type; |
| u8 return_status; |
| __be16 data_length; |
| u8 data[OCC_RESP_DATA_BYTES]; |
| __be16 checksum; |
| } __packed; |
| |
| struct occ_sensor_data_block_header { |
| u8 eye_catcher[4]; |
| u8 reserved; |
| u8 sensor_format; |
| u8 sensor_length; |
| u8 num_sensors; |
| } __packed; |
| |
| struct occ_sensor_data_block { |
| struct occ_sensor_data_block_header header; |
| u32 data; |
| } __packed; |
| |
| struct occ_poll_response_header { |
| u8 status; |
| u8 ext_status; |
| u8 occs_present; |
| u8 config_data; |
| u8 occ_state; |
| u8 mode; |
| u8 ips_status; |
| u8 error_log_id; |
| __be32 error_log_start_address; |
| __be16 error_log_length; |
| u16 reserved; |
| u8 occ_code_level[16]; |
| u8 eye_catcher[6]; |
| u8 num_sensor_data_blocks; |
| u8 sensor_data_block_header_version; |
| } __packed; |
| |
| struct occ_poll_response { |
| struct occ_poll_response_header header; |
| struct occ_sensor_data_block block; |
| } __packed; |
| |
| struct occ_sensor { |
| u8 num_sensors; |
| u8 version; |
| void *data; /* pointer to sensor data start within response */ |
| }; |
| |
| /* |
| * OCC only provides one sensor data block of each type, but any number of |
| * sensors within that block. |
| */ |
| struct occ_sensors { |
| struct occ_sensor temp; |
| struct occ_sensor freq; |
| struct occ_sensor power; |
| struct occ_sensor caps; |
| struct occ_sensor extended; |
| }; |
| |
| /* |
| * Use our own attribute struct so we can dynamically allocate space for the |
| * name. |
| */ |
| struct occ_attribute { |
| char name[32]; |
| struct sensor_device_attribute_2 sensor; |
| }; |
| |
| struct occ { |
| struct device *bus_dev; |
| |
| struct occ_response resp; |
| struct occ_sensors sensors; |
| |
| int powr_sample_time_us; /* average power sample time */ |
| u8 poll_cmd_data; /* to perform OCC poll command */ |
| int (*send_cmd)(struct occ *occ, u8 *cmd); |
| |
| unsigned long last_update; |
| struct mutex lock; /* lock OCC access */ |
| |
| struct device *hwmon; |
| struct occ_attribute *attrs; |
| struct attribute_group group; |
| const struct attribute_group *groups[2]; |
| |
| int error; /* latest transfer error */ |
| unsigned int error_count; /* number of xfr errors observed */ |
| unsigned long last_safe; /* time OCC entered "safe" state */ |
| |
| /* |
| * Store the previous state data for comparison in order to notify |
| * sysfs readers of state changes. |
| */ |
| int prev_error; |
| u8 prev_stat; |
| u8 prev_ext_stat; |
| u8 prev_occs_present; |
| }; |
| |
| int occ_setup(struct occ *occ, const char *name); |
| int occ_setup_sysfs(struct occ *occ); |
| void occ_shutdown(struct occ *occ); |
| void occ_sysfs_poll_done(struct occ *occ); |
| int occ_update_response(struct occ *occ); |
| |
| #endif /* OCC_COMMON_H */ |