| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2016 Imagination Technologies |
| * Author: Paul Burton <paul.burton@mips.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/io.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| #include "line-display.h" |
| |
| struct img_ascii_lcd_ctx; |
| |
| /** |
| * struct img_ascii_lcd_config - Configuration information about an LCD model |
| * @num_chars: the number of characters the LCD can display |
| * @external_regmap: true if registers are in a system controller, else false |
| * @update: function called to update the LCD |
| */ |
| struct img_ascii_lcd_config { |
| unsigned int num_chars; |
| bool external_regmap; |
| void (*update)(struct linedisp *linedisp); |
| }; |
| |
| /** |
| * struct img_ascii_lcd_ctx - Private data structure |
| * @base: the base address of the LCD registers |
| * @regmap: the regmap through which LCD registers are accessed |
| * @offset: the offset within regmap to the start of the LCD registers |
| * @cfg: pointer to the LCD model configuration |
| * @linedisp: line display structure |
| * @curr: the string currently displayed on the LCD |
| */ |
| struct img_ascii_lcd_ctx { |
| union { |
| void __iomem *base; |
| struct regmap *regmap; |
| }; |
| u32 offset; |
| const struct img_ascii_lcd_config *cfg; |
| struct linedisp linedisp; |
| char curr[] __aligned(8); |
| }; |
| |
| /* |
| * MIPS Boston development board |
| */ |
| |
| static void boston_update(struct linedisp *linedisp) |
| { |
| struct img_ascii_lcd_ctx *ctx = |
| container_of(linedisp, struct img_ascii_lcd_ctx, linedisp); |
| ulong val; |
| |
| #if BITS_PER_LONG == 64 |
| val = *((u64 *)&ctx->curr[0]); |
| __raw_writeq(val, ctx->base); |
| #elif BITS_PER_LONG == 32 |
| val = *((u32 *)&ctx->curr[0]); |
| __raw_writel(val, ctx->base); |
| val = *((u32 *)&ctx->curr[4]); |
| __raw_writel(val, ctx->base + 4); |
| #else |
| # error Not 32 or 64 bit |
| #endif |
| } |
| |
| static struct img_ascii_lcd_config boston_config = { |
| .num_chars = 8, |
| .update = boston_update, |
| }; |
| |
| /* |
| * MIPS Malta development board |
| */ |
| |
| static void malta_update(struct linedisp *linedisp) |
| { |
| struct img_ascii_lcd_ctx *ctx = |
| container_of(linedisp, struct img_ascii_lcd_ctx, linedisp); |
| unsigned int i; |
| int err = 0; |
| |
| for (i = 0; i < linedisp->num_chars; i++) { |
| err = regmap_write(ctx->regmap, |
| ctx->offset + (i * 8), ctx->curr[i]); |
| if (err) |
| break; |
| } |
| |
| if (unlikely(err)) |
| pr_err_ratelimited("Failed to update LCD display: %d\n", err); |
| } |
| |
| static struct img_ascii_lcd_config malta_config = { |
| .num_chars = 8, |
| .external_regmap = true, |
| .update = malta_update, |
| }; |
| |
| /* |
| * MIPS SEAD3 development board |
| */ |
| |
| enum { |
| SEAD3_REG_LCD_CTRL = 0x00, |
| #define SEAD3_REG_LCD_CTRL_SETDRAM BIT(7) |
| SEAD3_REG_LCD_DATA = 0x08, |
| SEAD3_REG_CPLD_STATUS = 0x10, |
| #define SEAD3_REG_CPLD_STATUS_BUSY BIT(0) |
| SEAD3_REG_CPLD_DATA = 0x18, |
| #define SEAD3_REG_CPLD_DATA_BUSY BIT(7) |
| }; |
| |
| static int sead3_wait_sm_idle(struct img_ascii_lcd_ctx *ctx) |
| { |
| unsigned int status; |
| int err; |
| |
| do { |
| err = regmap_read(ctx->regmap, |
| ctx->offset + SEAD3_REG_CPLD_STATUS, |
| &status); |
| if (err) |
| return err; |
| } while (status & SEAD3_REG_CPLD_STATUS_BUSY); |
| |
| return 0; |
| |
| } |
| |
| static int sead3_wait_lcd_idle(struct img_ascii_lcd_ctx *ctx) |
| { |
| unsigned int cpld_data; |
| int err; |
| |
| err = sead3_wait_sm_idle(ctx); |
| if (err) |
| return err; |
| |
| do { |
| err = regmap_read(ctx->regmap, |
| ctx->offset + SEAD3_REG_LCD_CTRL, |
| &cpld_data); |
| if (err) |
| return err; |
| |
| err = sead3_wait_sm_idle(ctx); |
| if (err) |
| return err; |
| |
| err = regmap_read(ctx->regmap, |
| ctx->offset + SEAD3_REG_CPLD_DATA, |
| &cpld_data); |
| if (err) |
| return err; |
| } while (cpld_data & SEAD3_REG_CPLD_DATA_BUSY); |
| |
| return 0; |
| } |
| |
| static void sead3_update(struct linedisp *linedisp) |
| { |
| struct img_ascii_lcd_ctx *ctx = |
| container_of(linedisp, struct img_ascii_lcd_ctx, linedisp); |
| unsigned int i; |
| int err = 0; |
| |
| for (i = 0; i < linedisp->num_chars; i++) { |
| err = sead3_wait_lcd_idle(ctx); |
| if (err) |
| break; |
| |
| err = regmap_write(ctx->regmap, |
| ctx->offset + SEAD3_REG_LCD_CTRL, |
| SEAD3_REG_LCD_CTRL_SETDRAM | i); |
| if (err) |
| break; |
| |
| err = sead3_wait_lcd_idle(ctx); |
| if (err) |
| break; |
| |
| err = regmap_write(ctx->regmap, |
| ctx->offset + SEAD3_REG_LCD_DATA, |
| ctx->curr[i]); |
| if (err) |
| break; |
| } |
| |
| if (unlikely(err)) |
| pr_err_ratelimited("Failed to update LCD display: %d\n", err); |
| } |
| |
| static struct img_ascii_lcd_config sead3_config = { |
| .num_chars = 16, |
| .external_regmap = true, |
| .update = sead3_update, |
| }; |
| |
| static const struct of_device_id img_ascii_lcd_matches[] = { |
| { .compatible = "img,boston-lcd", .data = &boston_config }, |
| { .compatible = "mti,malta-lcd", .data = &malta_config }, |
| { .compatible = "mti,sead3-lcd", .data = &sead3_config }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, img_ascii_lcd_matches); |
| |
| /** |
| * img_ascii_lcd_probe() - probe an LCD display device |
| * @pdev: the LCD platform device |
| * |
| * Probe an LCD display device, ensuring that we have the required resources in |
| * order to access the LCD & setting up private data as well as sysfs files. |
| * |
| * Return: 0 on success, else -ERRNO |
| */ |
| static int img_ascii_lcd_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| const struct img_ascii_lcd_config *cfg = device_get_match_data(dev); |
| struct img_ascii_lcd_ctx *ctx; |
| int err; |
| |
| ctx = devm_kzalloc(dev, sizeof(*ctx) + cfg->num_chars, GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| if (cfg->external_regmap) { |
| ctx->regmap = syscon_node_to_regmap(dev->parent->of_node); |
| if (IS_ERR(ctx->regmap)) |
| return PTR_ERR(ctx->regmap); |
| |
| if (of_property_read_u32(dev->of_node, "offset", &ctx->offset)) |
| return -EINVAL; |
| } else { |
| ctx->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(ctx->base)) |
| return PTR_ERR(ctx->base); |
| } |
| |
| err = linedisp_register(&ctx->linedisp, dev, cfg->num_chars, ctx->curr, |
| cfg->update); |
| if (err) |
| return err; |
| |
| /* for backwards compatibility */ |
| err = compat_only_sysfs_link_entry_to_kobj(&dev->kobj, |
| &ctx->linedisp.dev.kobj, |
| "message", NULL); |
| if (err) |
| goto err_unregister; |
| |
| platform_set_drvdata(pdev, ctx); |
| return 0; |
| |
| err_unregister: |
| linedisp_unregister(&ctx->linedisp); |
| return err; |
| } |
| |
| /** |
| * img_ascii_lcd_remove() - remove an LCD display device |
| * @pdev: the LCD platform device |
| * |
| * Remove an LCD display device, freeing private resources & ensuring that the |
| * driver stops using the LCD display registers. |
| * |
| * Return: 0 |
| */ |
| static int img_ascii_lcd_remove(struct platform_device *pdev) |
| { |
| struct img_ascii_lcd_ctx *ctx = platform_get_drvdata(pdev); |
| |
| sysfs_remove_link(&pdev->dev.kobj, "message"); |
| linedisp_unregister(&ctx->linedisp); |
| return 0; |
| } |
| |
| static struct platform_driver img_ascii_lcd_driver = { |
| .driver = { |
| .name = "img-ascii-lcd", |
| .of_match_table = img_ascii_lcd_matches, |
| }, |
| .probe = img_ascii_lcd_probe, |
| .remove = img_ascii_lcd_remove, |
| }; |
| module_platform_driver(img_ascii_lcd_driver); |
| |
| MODULE_DESCRIPTION("Imagination Technologies ASCII LCD Display"); |
| MODULE_AUTHOR("Paul Burton <paul.burton@mips.com>"); |
| MODULE_LICENSE("GPL"); |