| /* |
| * Bus driver for MIPS Common Device Memory Map (CDMM). |
| * |
| * Copyright (C) 2014-2015 Imagination Technologies Ltd. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| |
| #include <linux/atomic.h> |
| #include <linux/err.h> |
| #include <linux/cpu.h> |
| #include <linux/cpumask.h> |
| #include <linux/io.h> |
| #include <linux/of_address.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/smp.h> |
| #include <asm/cdmm.h> |
| #include <asm/hazards.h> |
| #include <asm/mipsregs.h> |
| |
| /* Access control and status register fields */ |
| #define CDMM_ACSR_DEVTYPE_SHIFT 24 |
| #define CDMM_ACSR_DEVTYPE (255ul << CDMM_ACSR_DEVTYPE_SHIFT) |
| #define CDMM_ACSR_DEVSIZE_SHIFT 16 |
| #define CDMM_ACSR_DEVSIZE (31ul << CDMM_ACSR_DEVSIZE_SHIFT) |
| #define CDMM_ACSR_DEVREV_SHIFT 12 |
| #define CDMM_ACSR_DEVREV (15ul << CDMM_ACSR_DEVREV_SHIFT) |
| #define CDMM_ACSR_UW (1ul << 3) |
| #define CDMM_ACSR_UR (1ul << 2) |
| #define CDMM_ACSR_SW (1ul << 1) |
| #define CDMM_ACSR_SR (1ul << 0) |
| |
| /* Each block of device registers is 64 bytes */ |
| #define CDMM_DRB_SIZE 64 |
| |
| #define to_mips_cdmm_driver(d) container_of(d, struct mips_cdmm_driver, drv) |
| |
| /* Default physical base address */ |
| static phys_addr_t mips_cdmm_default_base; |
| |
| /* Bus operations */ |
| |
| static const struct mips_cdmm_device_id * |
| mips_cdmm_lookup(const struct mips_cdmm_device_id *table, |
| struct mips_cdmm_device *dev) |
| { |
| int ret = 0; |
| |
| for (; table->type; ++table) { |
| ret = (dev->type == table->type); |
| if (ret) |
| break; |
| } |
| |
| return ret ? table : NULL; |
| } |
| |
| static int mips_cdmm_match(struct device *dev, struct device_driver *drv) |
| { |
| struct mips_cdmm_device *cdev = to_mips_cdmm_device(dev); |
| struct mips_cdmm_driver *cdrv = to_mips_cdmm_driver(drv); |
| |
| return mips_cdmm_lookup(cdrv->id_table, cdev) != NULL; |
| } |
| |
| static int mips_cdmm_uevent(const struct device *dev, struct kobj_uevent_env *env) |
| { |
| const struct mips_cdmm_device *cdev = to_mips_cdmm_device(dev); |
| int retval = 0; |
| |
| retval = add_uevent_var(env, "CDMM_CPU=%u", cdev->cpu); |
| if (retval) |
| return retval; |
| |
| retval = add_uevent_var(env, "CDMM_TYPE=0x%02x", cdev->type); |
| if (retval) |
| return retval; |
| |
| retval = add_uevent_var(env, "CDMM_REV=%u", cdev->rev); |
| if (retval) |
| return retval; |
| |
| retval = add_uevent_var(env, "MODALIAS=mipscdmm:t%02X", cdev->type); |
| return retval; |
| } |
| |
| /* Device attributes */ |
| |
| #define CDMM_ATTR(name, fmt, arg...) \ |
| static ssize_t name##_show(struct device *_dev, \ |
| struct device_attribute *attr, char *buf) \ |
| { \ |
| struct mips_cdmm_device *dev = to_mips_cdmm_device(_dev); \ |
| return sprintf(buf, fmt, arg); \ |
| } \ |
| static DEVICE_ATTR_RO(name); |
| |
| CDMM_ATTR(cpu, "%u\n", dev->cpu); |
| CDMM_ATTR(type, "0x%02x\n", dev->type); |
| CDMM_ATTR(revision, "%u\n", dev->rev); |
| CDMM_ATTR(modalias, "mipscdmm:t%02X\n", dev->type); |
| CDMM_ATTR(resource, "\t%016llx\t%016llx\t%016lx\n", |
| (unsigned long long)dev->res.start, |
| (unsigned long long)dev->res.end, |
| dev->res.flags); |
| |
| static struct attribute *mips_cdmm_dev_attrs[] = { |
| &dev_attr_cpu.attr, |
| &dev_attr_type.attr, |
| &dev_attr_revision.attr, |
| &dev_attr_modalias.attr, |
| &dev_attr_resource.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(mips_cdmm_dev); |
| |
| struct bus_type mips_cdmm_bustype = { |
| .name = "cdmm", |
| .dev_groups = mips_cdmm_dev_groups, |
| .match = mips_cdmm_match, |
| .uevent = mips_cdmm_uevent, |
| }; |
| EXPORT_SYMBOL_GPL(mips_cdmm_bustype); |
| |
| /* |
| * Standard driver callback helpers. |
| * |
| * All the CDMM driver callbacks need to be executed on the appropriate CPU from |
| * workqueues. For the standard driver callbacks we need a work function |
| * (mips_cdmm_{void,int}_work()) to do the actual call from the right CPU, and a |
| * wrapper function (generated with BUILD_PERCPU_HELPER) to arrange for the work |
| * function to be called on that CPU. |
| */ |
| |
| /** |
| * struct mips_cdmm_work_dev - Data for per-device call work. |
| * @fn: CDMM driver callback function to call for the device. |
| * @dev: CDMM device to pass to @fn. |
| */ |
| struct mips_cdmm_work_dev { |
| void *fn; |
| struct mips_cdmm_device *dev; |
| }; |
| |
| /** |
| * mips_cdmm_void_work() - Call a void returning CDMM driver callback. |
| * @data: struct mips_cdmm_work_dev pointer. |
| * |
| * A work_on_cpu() callback function to call an arbitrary CDMM driver callback |
| * function which doesn't return a value. |
| */ |
| static long mips_cdmm_void_work(void *data) |
| { |
| struct mips_cdmm_work_dev *work = data; |
| void (*fn)(struct mips_cdmm_device *) = work->fn; |
| |
| fn(work->dev); |
| return 0; |
| } |
| |
| /** |
| * mips_cdmm_int_work() - Call an int returning CDMM driver callback. |
| * @data: struct mips_cdmm_work_dev pointer. |
| * |
| * A work_on_cpu() callback function to call an arbitrary CDMM driver callback |
| * function which returns an int. |
| */ |
| static long mips_cdmm_int_work(void *data) |
| { |
| struct mips_cdmm_work_dev *work = data; |
| int (*fn)(struct mips_cdmm_device *) = work->fn; |
| |
| return fn(work->dev); |
| } |
| |
| #define _BUILD_RET_void |
| #define _BUILD_RET_int return |
| |
| /** |
| * BUILD_PERCPU_HELPER() - Helper to call a CDMM driver callback on right CPU. |
| * @_ret: Return type (void or int). |
| * @_name: Name of CDMM driver callback function. |
| * |
| * Generates a specific device callback function to call a CDMM driver callback |
| * function on the appropriate CPU for the device, and if applicable return the |
| * result. |
| */ |
| #define BUILD_PERCPU_HELPER(_ret, _name) \ |
| static _ret mips_cdmm_##_name(struct device *dev) \ |
| { \ |
| struct mips_cdmm_device *cdev = to_mips_cdmm_device(dev); \ |
| struct mips_cdmm_driver *cdrv = to_mips_cdmm_driver(dev->driver); \ |
| struct mips_cdmm_work_dev work = { \ |
| .fn = cdrv->_name, \ |
| .dev = cdev, \ |
| }; \ |
| \ |
| _BUILD_RET_##_ret work_on_cpu(cdev->cpu, \ |
| mips_cdmm_##_ret##_work, &work); \ |
| } |
| |
| /* Driver callback functions */ |
| BUILD_PERCPU_HELPER(int, probe) /* int mips_cdmm_probe(struct device) */ |
| BUILD_PERCPU_HELPER(int, remove) /* int mips_cdmm_remove(struct device) */ |
| BUILD_PERCPU_HELPER(void, shutdown) /* void mips_cdmm_shutdown(struct device) */ |
| |
| |
| /* Driver registration */ |
| |
| /** |
| * mips_cdmm_driver_register() - Register a CDMM driver. |
| * @drv: CDMM driver information. |
| * |
| * Register a CDMM driver with the CDMM subsystem. The driver will be informed |
| * of matching devices which are discovered. |
| * |
| * Returns: 0 on success. |
| */ |
| int mips_cdmm_driver_register(struct mips_cdmm_driver *drv) |
| { |
| drv->drv.bus = &mips_cdmm_bustype; |
| |
| if (drv->probe) |
| drv->drv.probe = mips_cdmm_probe; |
| if (drv->remove) |
| drv->drv.remove = mips_cdmm_remove; |
| if (drv->shutdown) |
| drv->drv.shutdown = mips_cdmm_shutdown; |
| |
| return driver_register(&drv->drv); |
| } |
| EXPORT_SYMBOL_GPL(mips_cdmm_driver_register); |
| |
| /** |
| * mips_cdmm_driver_unregister() - Unregister a CDMM driver. |
| * @drv: CDMM driver information. |
| * |
| * Unregister a CDMM driver from the CDMM subsystem. |
| */ |
| void mips_cdmm_driver_unregister(struct mips_cdmm_driver *drv) |
| { |
| driver_unregister(&drv->drv); |
| } |
| EXPORT_SYMBOL_GPL(mips_cdmm_driver_unregister); |
| |
| |
| /* CDMM initialisation and bus discovery */ |
| |
| /** |
| * struct mips_cdmm_bus - Info about CDMM bus. |
| * @phys: Physical address at which it is mapped. |
| * @regs: Virtual address where registers can be accessed. |
| * @drbs: Total number of DRBs. |
| * @drbs_reserved: Number of DRBs reserved. |
| * @discovered: Whether the devices on the bus have been discovered yet. |
| * @offline: Whether the CDMM bus is going offline (or very early |
| * coming back online), in which case it should be |
| * reconfigured each time. |
| */ |
| struct mips_cdmm_bus { |
| phys_addr_t phys; |
| void __iomem *regs; |
| unsigned int drbs; |
| unsigned int drbs_reserved; |
| bool discovered; |
| bool offline; |
| }; |
| |
| static struct mips_cdmm_bus mips_cdmm_boot_bus; |
| static DEFINE_PER_CPU(struct mips_cdmm_bus *, mips_cdmm_buses); |
| static atomic_t mips_cdmm_next_id = ATOMIC_INIT(-1); |
| |
| /** |
| * mips_cdmm_get_bus() - Get the per-CPU CDMM bus information. |
| * |
| * Get information about the per-CPU CDMM bus, if the bus is present. |
| * |
| * The caller must prevent migration to another CPU, either by disabling |
| * pre-emption or by running from a pinned kernel thread. |
| * |
| * Returns: Pointer to CDMM bus information for the current CPU. |
| * May return ERR_PTR(-errno) in case of error, so check with |
| * IS_ERR(). |
| */ |
| static struct mips_cdmm_bus *mips_cdmm_get_bus(void) |
| { |
| struct mips_cdmm_bus *bus, **bus_p; |
| unsigned long flags; |
| unsigned int cpu; |
| |
| if (!cpu_has_cdmm) |
| return ERR_PTR(-ENODEV); |
| |
| cpu = smp_processor_id(); |
| /* Avoid early use of per-cpu primitives before initialised */ |
| if (cpu == 0) |
| return &mips_cdmm_boot_bus; |
| |
| /* Get bus pointer */ |
| bus_p = per_cpu_ptr(&mips_cdmm_buses, cpu); |
| local_irq_save(flags); |
| bus = *bus_p; |
| /* Attempt allocation if NULL */ |
| if (unlikely(!bus)) { |
| bus = kzalloc(sizeof(*bus), GFP_ATOMIC); |
| if (unlikely(!bus)) |
| bus = ERR_PTR(-ENOMEM); |
| else |
| *bus_p = bus; |
| } |
| local_irq_restore(flags); |
| return bus; |
| } |
| |
| /** |
| * mips_cdmm_cur_base() - Find current physical base address of CDMM region. |
| * |
| * Returns: Physical base address of CDMM region according to cdmmbase CP0 |
| * register, or 0 if the CDMM region is disabled. |
| */ |
| static phys_addr_t mips_cdmm_cur_base(void) |
| { |
| unsigned long cdmmbase = read_c0_cdmmbase(); |
| |
| if (!(cdmmbase & MIPS_CDMMBASE_EN)) |
| return 0; |
| |
| return (cdmmbase >> MIPS_CDMMBASE_ADDR_SHIFT) |
| << MIPS_CDMMBASE_ADDR_START; |
| } |
| |
| /** |
| * mips_cdmm_phys_base() - Choose a physical base address for CDMM region. |
| * |
| * Picking a suitable physical address at which to map the CDMM region is |
| * platform specific, so this weak function can be overridden by platform |
| * code to pick a suitable value if none is configured by the bootloader. |
| * By default this method tries to find a CDMM-specific node in the system |
| * dtb. Note that this won't work for early serial console. |
| */ |
| phys_addr_t __weak mips_cdmm_phys_base(void) |
| { |
| struct device_node *np; |
| struct resource res; |
| int err; |
| |
| np = of_find_compatible_node(NULL, NULL, "mti,mips-cdmm"); |
| if (np) { |
| err = of_address_to_resource(np, 0, &res); |
| of_node_put(np); |
| if (!err) |
| return res.start; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * mips_cdmm_setup() - Ensure the CDMM bus is initialised and usable. |
| * @bus: Pointer to bus information for current CPU. |
| * IS_ERR(bus) is checked, so no need for caller to check. |
| * |
| * The caller must prevent migration to another CPU, either by disabling |
| * pre-emption or by running from a pinned kernel thread. |
| * |
| * Returns 0 on success, -errno on failure. |
| */ |
| static int mips_cdmm_setup(struct mips_cdmm_bus *bus) |
| { |
| unsigned long cdmmbase, flags; |
| int ret = 0; |
| |
| if (IS_ERR(bus)) |
| return PTR_ERR(bus); |
| |
| local_irq_save(flags); |
| /* Don't set up bus a second time unless marked offline */ |
| if (bus->offline) { |
| /* If CDMM region is still set up, nothing to do */ |
| if (bus->phys == mips_cdmm_cur_base()) |
| goto out; |
| /* |
| * The CDMM region isn't set up as expected, so it needs |
| * reconfiguring, but then we can stop checking it. |
| */ |
| bus->offline = false; |
| } else if (bus->phys > 1) { |
| goto out; |
| } |
| |
| /* If the CDMM region is already configured, inherit that setup */ |
| if (!bus->phys) |
| bus->phys = mips_cdmm_cur_base(); |
| /* Otherwise, ask platform code for suggestions */ |
| if (!bus->phys) |
| bus->phys = mips_cdmm_phys_base(); |
| /* Otherwise, copy what other CPUs have done */ |
| if (!bus->phys) |
| bus->phys = mips_cdmm_default_base; |
| /* Otherwise, complain once */ |
| if (!bus->phys) { |
| bus->phys = 1; |
| /* |
| * If you hit this, either your bootloader needs to set up the |
| * CDMM on the boot CPU, or else you need to implement |
| * mips_cdmm_phys_base() for your platform (see asm/cdmm.h). |
| */ |
| pr_err("cdmm%u: Failed to choose a physical base\n", |
| smp_processor_id()); |
| } |
| /* Already complained? */ |
| if (bus->phys == 1) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| /* Record our success for other CPUs to copy */ |
| mips_cdmm_default_base = bus->phys; |
| |
| pr_debug("cdmm%u: Enabling CDMM region at %pa\n", |
| smp_processor_id(), &bus->phys); |
| |
| /* Enable CDMM */ |
| cdmmbase = read_c0_cdmmbase(); |
| cdmmbase &= (1ul << MIPS_CDMMBASE_ADDR_SHIFT) - 1; |
| cdmmbase |= (bus->phys >> MIPS_CDMMBASE_ADDR_START) |
| << MIPS_CDMMBASE_ADDR_SHIFT; |
| cdmmbase |= MIPS_CDMMBASE_EN; |
| write_c0_cdmmbase(cdmmbase); |
| tlbw_use_hazard(); |
| |
| bus->regs = (void __iomem *)CKSEG1ADDR(bus->phys); |
| bus->drbs = 1 + ((cdmmbase & MIPS_CDMMBASE_SIZE) >> |
| MIPS_CDMMBASE_SIZE_SHIFT); |
| bus->drbs_reserved = !!(cdmmbase & MIPS_CDMMBASE_CI); |
| |
| out: |
| local_irq_restore(flags); |
| return ret; |
| } |
| |
| /** |
| * mips_cdmm_early_probe() - Minimally probe for a specific device on CDMM. |
| * @dev_type: CDMM type code to look for. |
| * |
| * Minimally configure the in-CPU Common Device Memory Map (CDMM) and look for a |
| * specific device. This can be used to find a device very early in boot for |
| * example to configure an early FDC console device. |
| * |
| * The caller must prevent migration to another CPU, either by disabling |
| * pre-emption or by running from a pinned kernel thread. |
| * |
| * Returns: MMIO pointer to device memory. The caller can read the ACSR |
| * register to find more information about the device (such as the |
| * version number or the number of blocks). |
| * May return IOMEM_ERR_PTR(-errno) in case of error, so check with |
| * IS_ERR(). |
| */ |
| void __iomem *mips_cdmm_early_probe(unsigned int dev_type) |
| { |
| struct mips_cdmm_bus *bus; |
| void __iomem *cdmm; |
| u32 acsr; |
| unsigned int drb, type, size; |
| int err; |
| |
| if (WARN_ON(!dev_type)) |
| return IOMEM_ERR_PTR(-ENODEV); |
| |
| bus = mips_cdmm_get_bus(); |
| err = mips_cdmm_setup(bus); |
| if (err) |
| return IOMEM_ERR_PTR(err); |
| |
| /* Skip the first block if it's reserved for more registers */ |
| drb = bus->drbs_reserved; |
| cdmm = bus->regs; |
| |
| /* Look for a specific device type */ |
| for (; drb < bus->drbs; drb += size + 1) { |
| acsr = __raw_readl(cdmm + drb * CDMM_DRB_SIZE); |
| type = (acsr & CDMM_ACSR_DEVTYPE) >> CDMM_ACSR_DEVTYPE_SHIFT; |
| if (type == dev_type) |
| return cdmm + drb * CDMM_DRB_SIZE; |
| size = (acsr & CDMM_ACSR_DEVSIZE) >> CDMM_ACSR_DEVSIZE_SHIFT; |
| } |
| |
| return IOMEM_ERR_PTR(-ENODEV); |
| } |
| EXPORT_SYMBOL_GPL(mips_cdmm_early_probe); |
| |
| /** |
| * mips_cdmm_release() - Release a removed CDMM device. |
| * @dev: Device object |
| * |
| * Clean up the struct mips_cdmm_device for an unused CDMM device. This is |
| * called automatically by the driver core when a device is removed. |
| */ |
| static void mips_cdmm_release(struct device *dev) |
| { |
| struct mips_cdmm_device *cdev = to_mips_cdmm_device(dev); |
| |
| kfree(cdev); |
| } |
| |
| /** |
| * mips_cdmm_bus_discover() - Discover the devices on the CDMM bus. |
| * @bus: CDMM bus information, must already be set up. |
| */ |
| static void mips_cdmm_bus_discover(struct mips_cdmm_bus *bus) |
| { |
| void __iomem *cdmm; |
| u32 acsr; |
| unsigned int drb, type, size, rev; |
| struct mips_cdmm_device *dev; |
| unsigned int cpu = smp_processor_id(); |
| int ret = 0; |
| int id = 0; |
| |
| /* Skip the first block if it's reserved for more registers */ |
| drb = bus->drbs_reserved; |
| cdmm = bus->regs; |
| |
| /* Discover devices */ |
| bus->discovered = true; |
| pr_info("cdmm%u discovery (%u blocks)\n", cpu, bus->drbs); |
| for (; drb < bus->drbs; drb += size + 1) { |
| acsr = __raw_readl(cdmm + drb * CDMM_DRB_SIZE); |
| type = (acsr & CDMM_ACSR_DEVTYPE) >> CDMM_ACSR_DEVTYPE_SHIFT; |
| size = (acsr & CDMM_ACSR_DEVSIZE) >> CDMM_ACSR_DEVSIZE_SHIFT; |
| rev = (acsr & CDMM_ACSR_DEVREV) >> CDMM_ACSR_DEVREV_SHIFT; |
| |
| if (!type) |
| continue; |
| |
| pr_info("cdmm%u-%u: @%u (%#x..%#x), type 0x%02x, rev %u\n", |
| cpu, id, drb, drb * CDMM_DRB_SIZE, |
| (drb + size + 1) * CDMM_DRB_SIZE - 1, |
| type, rev); |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) |
| break; |
| |
| dev->cpu = cpu; |
| dev->res.start = bus->phys + drb * CDMM_DRB_SIZE; |
| dev->res.end = bus->phys + |
| (drb + size + 1) * CDMM_DRB_SIZE - 1; |
| dev->res.flags = IORESOURCE_MEM; |
| dev->type = type; |
| dev->rev = rev; |
| dev->dev.parent = get_cpu_device(cpu); |
| dev->dev.bus = &mips_cdmm_bustype; |
| dev->dev.id = atomic_inc_return(&mips_cdmm_next_id); |
| dev->dev.release = mips_cdmm_release; |
| |
| dev_set_name(&dev->dev, "cdmm%u-%u", cpu, id); |
| ++id; |
| ret = device_register(&dev->dev); |
| if (ret) |
| put_device(&dev->dev); |
| } |
| } |
| |
| |
| /* |
| * CPU hotplug and initialisation |
| * |
| * All the CDMM driver callbacks need to be executed on the appropriate CPU from |
| * workqueues. For the CPU callbacks, they need to be called for all devices on |
| * that CPU, so the work function calls bus_for_each_dev, using a helper |
| * (generated with BUILD_PERDEV_HELPER) to call the driver callback if the |
| * device's CPU matches. |
| */ |
| |
| /** |
| * BUILD_PERDEV_HELPER() - Helper to call a CDMM driver callback if CPU matches. |
| * @_name: Name of CDMM driver callback function. |
| * |
| * Generates a bus_for_each_dev callback function to call a specific CDMM driver |
| * callback function for the device if the device's CPU matches that pointed to |
| * by the data argument. |
| * |
| * This is used for informing drivers for all devices on a given CPU of some |
| * event (such as the CPU going online/offline). |
| * |
| * It is expected to already be called from the appropriate CPU. |
| */ |
| #define BUILD_PERDEV_HELPER(_name) \ |
| static int mips_cdmm_##_name##_helper(struct device *dev, void *data) \ |
| { \ |
| struct mips_cdmm_device *cdev = to_mips_cdmm_device(dev); \ |
| struct mips_cdmm_driver *cdrv; \ |
| unsigned int cpu = *(unsigned int *)data; \ |
| \ |
| if (cdev->cpu != cpu || !dev->driver) \ |
| return 0; \ |
| \ |
| cdrv = to_mips_cdmm_driver(dev->driver); \ |
| if (!cdrv->_name) \ |
| return 0; \ |
| return cdrv->_name(cdev); \ |
| } |
| |
| /* bus_for_each_dev callback helper functions */ |
| BUILD_PERDEV_HELPER(cpu_down) /* int mips_cdmm_cpu_down_helper(...) */ |
| BUILD_PERDEV_HELPER(cpu_up) /* int mips_cdmm_cpu_up_helper(...) */ |
| |
| /** |
| * mips_cdmm_cpu_down_prep() - Callback for CPUHP DOWN_PREP: |
| * Tear down the CDMM bus. |
| * @cpu: unsigned int CPU number. |
| * |
| * This function is executed on the hotplugged CPU and calls the CDMM |
| * driver cpu_down callback for all devices on that CPU. |
| */ |
| static int mips_cdmm_cpu_down_prep(unsigned int cpu) |
| { |
| struct mips_cdmm_bus *bus; |
| long ret; |
| |
| /* Inform all the devices on the bus */ |
| ret = bus_for_each_dev(&mips_cdmm_bustype, NULL, &cpu, |
| mips_cdmm_cpu_down_helper); |
| |
| /* |
| * While bus is offline, each use of it should reconfigure it just in |
| * case it is first use when coming back online again. |
| */ |
| bus = mips_cdmm_get_bus(); |
| if (!IS_ERR(bus)) |
| bus->offline = true; |
| |
| return ret; |
| } |
| |
| /** |
| * mips_cdmm_cpu_online() - Callback for CPUHP ONLINE: Bring up the CDMM bus. |
| * @cpu: unsigned int CPU number. |
| * |
| * This work_on_cpu callback function is executed on a given CPU to discover |
| * CDMM devices on that CPU, or to call the CDMM driver cpu_up callback for all |
| * devices already discovered on that CPU. |
| * |
| * It is used as work_on_cpu callback function during |
| * initialisation. When CPUs are brought online the function is |
| * invoked directly on the hotplugged CPU. |
| */ |
| static int mips_cdmm_cpu_online(unsigned int cpu) |
| { |
| struct mips_cdmm_bus *bus; |
| long ret; |
| |
| bus = mips_cdmm_get_bus(); |
| ret = mips_cdmm_setup(bus); |
| if (ret) |
| return ret; |
| |
| /* Bus now set up, so we can drop the offline flag if still set */ |
| bus->offline = false; |
| |
| if (!bus->discovered) |
| mips_cdmm_bus_discover(bus); |
| else |
| /* Inform all the devices on the bus */ |
| ret = bus_for_each_dev(&mips_cdmm_bustype, NULL, &cpu, |
| mips_cdmm_cpu_up_helper); |
| |
| return ret; |
| } |
| |
| /** |
| * mips_cdmm_init() - Initialise CDMM bus. |
| * |
| * Initialise CDMM bus, discover CDMM devices for online CPUs, and arrange for |
| * hotplug notifications so the CDMM drivers can be kept up to date. |
| */ |
| static int __init mips_cdmm_init(void) |
| { |
| int ret; |
| |
| /* Register the bus */ |
| ret = bus_register(&mips_cdmm_bustype); |
| if (ret) |
| return ret; |
| |
| /* We want to be notified about new CPUs */ |
| ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "bus/cdmm:online", |
| mips_cdmm_cpu_online, mips_cdmm_cpu_down_prep); |
| if (ret < 0) |
| pr_warn("cdmm: Failed to register CPU notifier\n"); |
| |
| return ret; |
| } |
| subsys_initcall(mips_cdmm_init); |