| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * linux/drivers/clocksource/timer-sp.c |
| * |
| * Copyright (C) 1999 - 2003 ARM Limited |
| * Copyright (C) 2000 Deep Blue Solutions Ltd |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/clk.h> |
| #include <linux/clocksource.h> |
| #include <linux/clockchips.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_clk.h> |
| #include <linux/of_irq.h> |
| #include <linux/sched_clock.h> |
| |
| #include "timer-sp.h" |
| |
| /* Hisilicon 64-bit timer(a variant of ARM SP804) */ |
| #define HISI_TIMER_1_BASE 0x00 |
| #define HISI_TIMER_2_BASE 0x40 |
| #define HISI_TIMER_LOAD 0x00 |
| #define HISI_TIMER_LOAD_H 0x04 |
| #define HISI_TIMER_VALUE 0x08 |
| #define HISI_TIMER_VALUE_H 0x0c |
| #define HISI_TIMER_CTRL 0x10 |
| #define HISI_TIMER_INTCLR 0x14 |
| #define HISI_TIMER_RIS 0x18 |
| #define HISI_TIMER_MIS 0x1c |
| #define HISI_TIMER_BGLOAD 0x20 |
| #define HISI_TIMER_BGLOAD_H 0x24 |
| |
| static struct sp804_timer arm_sp804_timer __initdata = { |
| .load = TIMER_LOAD, |
| .value = TIMER_VALUE, |
| .ctrl = TIMER_CTRL, |
| .intclr = TIMER_INTCLR, |
| .timer_base = {TIMER_1_BASE, TIMER_2_BASE}, |
| .width = 32, |
| }; |
| |
| static struct sp804_timer hisi_sp804_timer __initdata = { |
| .load = HISI_TIMER_LOAD, |
| .load_h = HISI_TIMER_LOAD_H, |
| .value = HISI_TIMER_VALUE, |
| .value_h = HISI_TIMER_VALUE_H, |
| .ctrl = HISI_TIMER_CTRL, |
| .intclr = HISI_TIMER_INTCLR, |
| .timer_base = {HISI_TIMER_1_BASE, HISI_TIMER_2_BASE}, |
| .width = 64, |
| }; |
| |
| static struct sp804_clkevt sp804_clkevt[NR_TIMERS]; |
| |
| static long __init sp804_get_clock_rate(struct clk *clk, const char *name) |
| { |
| int err; |
| |
| if (!clk) |
| clk = clk_get_sys("sp804", name); |
| if (IS_ERR(clk)) { |
| pr_err("%s clock not found: %ld\n", name, PTR_ERR(clk)); |
| return PTR_ERR(clk); |
| } |
| |
| err = clk_prepare_enable(clk); |
| if (err) { |
| pr_err("clock failed to enable: %d\n", err); |
| clk_put(clk); |
| return err; |
| } |
| |
| return clk_get_rate(clk); |
| } |
| |
| static struct sp804_clkevt * __init sp804_clkevt_get(void __iomem *base) |
| { |
| int i; |
| |
| for (i = 0; i < NR_TIMERS; i++) { |
| if (sp804_clkevt[i].base == base) |
| return &sp804_clkevt[i]; |
| } |
| |
| /* It's impossible to reach here */ |
| WARN_ON(1); |
| |
| return NULL; |
| } |
| |
| static struct sp804_clkevt *sched_clkevt; |
| |
| static u64 notrace sp804_read(void) |
| { |
| return ~readl_relaxed(sched_clkevt->value); |
| } |
| |
| static int __init sp804_clocksource_and_sched_clock_init(void __iomem *base, |
| const char *name, |
| struct clk *clk, |
| int use_sched_clock) |
| { |
| long rate; |
| struct sp804_clkevt *clkevt; |
| |
| rate = sp804_get_clock_rate(clk, name); |
| if (rate < 0) |
| return -EINVAL; |
| |
| clkevt = sp804_clkevt_get(base); |
| |
| writel(0, clkevt->ctrl); |
| writel(0xffffffff, clkevt->load); |
| writel(0xffffffff, clkevt->value); |
| if (clkevt->width == 64) { |
| writel(0xffffffff, clkevt->load_h); |
| writel(0xffffffff, clkevt->value_h); |
| } |
| writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, |
| clkevt->ctrl); |
| |
| clocksource_mmio_init(clkevt->value, name, |
| rate, 200, 32, clocksource_mmio_readl_down); |
| |
| if (use_sched_clock) { |
| sched_clkevt = clkevt; |
| sched_clock_register(sp804_read, 32, rate); |
| } |
| |
| return 0; |
| } |
| |
| |
| static struct sp804_clkevt *common_clkevt; |
| |
| /* |
| * IRQ handler for the timer |
| */ |
| static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = dev_id; |
| |
| /* clear the interrupt */ |
| writel(1, common_clkevt->intclr); |
| |
| evt->event_handler(evt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static inline void evt_timer_shutdown(struct clock_event_device *evt) |
| { |
| writel(0, common_clkevt->ctrl); |
| } |
| |
| static int sp804_shutdown(struct clock_event_device *evt) |
| { |
| evt_timer_shutdown(evt); |
| return 0; |
| } |
| |
| static int sp804_set_periodic(struct clock_event_device *evt) |
| { |
| unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE | |
| TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; |
| |
| evt_timer_shutdown(evt); |
| writel(common_clkevt->reload, common_clkevt->load); |
| writel(ctrl, common_clkevt->ctrl); |
| return 0; |
| } |
| |
| static int sp804_set_next_event(unsigned long next, |
| struct clock_event_device *evt) |
| { |
| unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE | |
| TIMER_CTRL_ONESHOT | TIMER_CTRL_ENABLE; |
| |
| writel(next, common_clkevt->load); |
| writel(ctrl, common_clkevt->ctrl); |
| |
| return 0; |
| } |
| |
| static struct clock_event_device sp804_clockevent = { |
| .features = CLOCK_EVT_FEAT_PERIODIC | |
| CLOCK_EVT_FEAT_ONESHOT | |
| CLOCK_EVT_FEAT_DYNIRQ, |
| .set_state_shutdown = sp804_shutdown, |
| .set_state_periodic = sp804_set_periodic, |
| .set_state_oneshot = sp804_shutdown, |
| .tick_resume = sp804_shutdown, |
| .set_next_event = sp804_set_next_event, |
| .rating = 300, |
| }; |
| |
| static int __init sp804_clockevents_init(void __iomem *base, unsigned int irq, |
| struct clk *clk, const char *name) |
| { |
| struct clock_event_device *evt = &sp804_clockevent; |
| long rate; |
| |
| rate = sp804_get_clock_rate(clk, name); |
| if (rate < 0) |
| return -EINVAL; |
| |
| common_clkevt = sp804_clkevt_get(base); |
| common_clkevt->reload = DIV_ROUND_CLOSEST(rate, HZ); |
| evt->name = name; |
| evt->irq = irq; |
| evt->cpumask = cpu_possible_mask; |
| |
| writel(0, common_clkevt->ctrl); |
| |
| if (request_irq(irq, sp804_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, |
| "timer", &sp804_clockevent)) |
| pr_err("request_irq() failed\n"); |
| clockevents_config_and_register(evt, rate, 0xf, 0xffffffff); |
| |
| return 0; |
| } |
| |
| static void __init sp804_clkevt_init(struct sp804_timer *timer, void __iomem *base) |
| { |
| int i; |
| |
| for (i = 0; i < NR_TIMERS; i++) { |
| void __iomem *timer_base; |
| struct sp804_clkevt *clkevt; |
| |
| timer_base = base + timer->timer_base[i]; |
| clkevt = &sp804_clkevt[i]; |
| clkevt->base = timer_base; |
| clkevt->load = timer_base + timer->load; |
| clkevt->load_h = timer_base + timer->load_h; |
| clkevt->value = timer_base + timer->value; |
| clkevt->value_h = timer_base + timer->value_h; |
| clkevt->ctrl = timer_base + timer->ctrl; |
| clkevt->intclr = timer_base + timer->intclr; |
| clkevt->width = timer->width; |
| } |
| } |
| |
| static int __init sp804_of_init(struct device_node *np, struct sp804_timer *timer) |
| { |
| static bool initialized = false; |
| void __iomem *base; |
| void __iomem *timer1_base; |
| void __iomem *timer2_base; |
| int irq, ret = -EINVAL; |
| u32 irq_num = 0; |
| struct clk *clk1, *clk2; |
| const char *name = of_get_property(np, "compatible", NULL); |
| |
| if (initialized) { |
| pr_debug("%pOF: skipping further SP804 timer device\n", np); |
| return 0; |
| } |
| |
| base = of_iomap(np, 0); |
| if (!base) |
| return -ENXIO; |
| |
| timer1_base = base + timer->timer_base[0]; |
| timer2_base = base + timer->timer_base[1]; |
| |
| /* Ensure timers are disabled */ |
| writel(0, timer1_base + timer->ctrl); |
| writel(0, timer2_base + timer->ctrl); |
| |
| clk1 = of_clk_get(np, 0); |
| if (IS_ERR(clk1)) |
| clk1 = NULL; |
| |
| /* Get the 2nd clock if the timer has 3 timer clocks */ |
| if (of_clk_get_parent_count(np) == 3) { |
| clk2 = of_clk_get(np, 1); |
| if (IS_ERR(clk2)) { |
| pr_err("%pOFn clock not found: %d\n", np, |
| (int)PTR_ERR(clk2)); |
| clk2 = NULL; |
| } |
| } else |
| clk2 = clk1; |
| |
| irq = irq_of_parse_and_map(np, 0); |
| if (irq <= 0) |
| goto err; |
| |
| sp804_clkevt_init(timer, base); |
| |
| of_property_read_u32(np, "arm,sp804-has-irq", &irq_num); |
| if (irq_num == 2) { |
| |
| ret = sp804_clockevents_init(timer2_base, irq, clk2, name); |
| if (ret) |
| goto err; |
| |
| ret = sp804_clocksource_and_sched_clock_init(timer1_base, |
| name, clk1, 1); |
| if (ret) |
| goto err; |
| } else { |
| |
| ret = sp804_clockevents_init(timer1_base, irq, clk1, name); |
| if (ret) |
| goto err; |
| |
| ret = sp804_clocksource_and_sched_clock_init(timer2_base, |
| name, clk2, 1); |
| if (ret) |
| goto err; |
| } |
| initialized = true; |
| |
| return 0; |
| err: |
| iounmap(base); |
| return ret; |
| } |
| |
| static int __init arm_sp804_of_init(struct device_node *np) |
| { |
| return sp804_of_init(np, &arm_sp804_timer); |
| } |
| TIMER_OF_DECLARE(sp804, "arm,sp804", arm_sp804_of_init); |
| |
| static int __init hisi_sp804_of_init(struct device_node *np) |
| { |
| return sp804_of_init(np, &hisi_sp804_timer); |
| } |
| TIMER_OF_DECLARE(hisi_sp804, "hisilicon,sp804", hisi_sp804_of_init); |
| |
| static int __init integrator_cp_of_init(struct device_node *np) |
| { |
| static int init_count = 0; |
| void __iomem *base; |
| int irq, ret = -EINVAL; |
| const char *name = of_get_property(np, "compatible", NULL); |
| struct clk *clk; |
| |
| base = of_iomap(np, 0); |
| if (!base) { |
| pr_err("Failed to iomap\n"); |
| return -ENXIO; |
| } |
| |
| clk = of_clk_get(np, 0); |
| if (IS_ERR(clk)) { |
| pr_err("Failed to get clock\n"); |
| return PTR_ERR(clk); |
| } |
| |
| /* Ensure timer is disabled */ |
| writel(0, base + arm_sp804_timer.ctrl); |
| |
| if (init_count == 2 || !of_device_is_available(np)) |
| goto err; |
| |
| sp804_clkevt_init(&arm_sp804_timer, base); |
| |
| if (!init_count) { |
| ret = sp804_clocksource_and_sched_clock_init(base, |
| name, clk, 0); |
| if (ret) |
| goto err; |
| } else { |
| irq = irq_of_parse_and_map(np, 0); |
| if (irq <= 0) |
| goto err; |
| |
| ret = sp804_clockevents_init(base, irq, clk, name); |
| if (ret) |
| goto err; |
| } |
| |
| init_count++; |
| return 0; |
| err: |
| iounmap(base); |
| return ret; |
| } |
| TIMER_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init); |