| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2007 PA Semi, Inc |
| * |
| * Maintained by: Olof Johansson <olof@lixom.net> |
| * |
| * Based on drivers/pcmcia/omap_cf.c |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/platform_device.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/mm.h> |
| #include <linux/vmalloc.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_platform.h> |
| #include <linux/slab.h> |
| |
| #include <pcmcia/ss.h> |
| |
| static const char driver_name[] = "electra-cf"; |
| |
| struct electra_cf_socket { |
| struct pcmcia_socket socket; |
| |
| struct timer_list timer; |
| unsigned present:1; |
| unsigned active:1; |
| |
| struct platform_device *ofdev; |
| unsigned long mem_phys; |
| void __iomem *mem_base; |
| unsigned long mem_size; |
| void __iomem *io_virt; |
| unsigned int io_base; |
| unsigned int io_size; |
| u_int irq; |
| struct resource iomem; |
| void __iomem *gpio_base; |
| int gpio_detect; |
| int gpio_vsense; |
| int gpio_3v; |
| int gpio_5v; |
| }; |
| |
| #define POLL_INTERVAL (2 * HZ) |
| |
| |
| static int electra_cf_present(struct electra_cf_socket *cf) |
| { |
| unsigned int gpio; |
| |
| gpio = in_le32(cf->gpio_base+0x40); |
| return !(gpio & (1 << cf->gpio_detect)); |
| } |
| |
| static int electra_cf_ss_init(struct pcmcia_socket *s) |
| { |
| return 0; |
| } |
| |
| /* the timer is primarily to kick this socket's pccardd */ |
| static void electra_cf_timer(struct timer_list *t) |
| { |
| struct electra_cf_socket *cf = from_timer(cf, t, timer); |
| int present = electra_cf_present(cf); |
| |
| if (present != cf->present) { |
| cf->present = present; |
| pcmcia_parse_events(&cf->socket, SS_DETECT); |
| } |
| |
| if (cf->active) |
| mod_timer(&cf->timer, jiffies + POLL_INTERVAL); |
| } |
| |
| static irqreturn_t electra_cf_irq(int irq, void *_cf) |
| { |
| struct electra_cf_socket *cf = _cf; |
| |
| electra_cf_timer(&cf->timer); |
| return IRQ_HANDLED; |
| } |
| |
| static int electra_cf_get_status(struct pcmcia_socket *s, u_int *sp) |
| { |
| struct electra_cf_socket *cf; |
| |
| if (!sp) |
| return -EINVAL; |
| |
| cf = container_of(s, struct electra_cf_socket, socket); |
| |
| /* NOTE CF is always 3VCARD */ |
| if (electra_cf_present(cf)) { |
| *sp = SS_READY | SS_DETECT | SS_POWERON | SS_3VCARD; |
| |
| s->pci_irq = cf->irq; |
| } else |
| *sp = 0; |
| return 0; |
| } |
| |
| static int electra_cf_set_socket(struct pcmcia_socket *sock, |
| struct socket_state_t *s) |
| { |
| unsigned int gpio; |
| unsigned int vcc; |
| struct electra_cf_socket *cf; |
| |
| cf = container_of(sock, struct electra_cf_socket, socket); |
| |
| /* "reset" means no power in our case */ |
| vcc = (s->flags & SS_RESET) ? 0 : s->Vcc; |
| |
| switch (vcc) { |
| case 0: |
| gpio = 0; |
| break; |
| case 33: |
| gpio = (1 << cf->gpio_3v); |
| break; |
| case 5: |
| gpio = (1 << cf->gpio_5v); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| gpio |= 1 << (cf->gpio_3v + 16); /* enwr */ |
| gpio |= 1 << (cf->gpio_5v + 16); /* enwr */ |
| out_le32(cf->gpio_base+0x90, gpio); |
| |
| pr_debug("%s: Vcc %d, io_irq %d, flags %04x csc %04x\n", |
| driver_name, s->Vcc, s->io_irq, s->flags, s->csc_mask); |
| |
| return 0; |
| } |
| |
| static int electra_cf_set_io_map(struct pcmcia_socket *s, |
| struct pccard_io_map *io) |
| { |
| return 0; |
| } |
| |
| static int electra_cf_set_mem_map(struct pcmcia_socket *s, |
| struct pccard_mem_map *map) |
| { |
| struct electra_cf_socket *cf; |
| |
| if (map->card_start) |
| return -EINVAL; |
| cf = container_of(s, struct electra_cf_socket, socket); |
| map->static_start = cf->mem_phys; |
| map->flags &= MAP_ACTIVE|MAP_ATTRIB; |
| if (!(map->flags & MAP_ATTRIB)) |
| map->static_start += 0x800; |
| return 0; |
| } |
| |
| static struct pccard_operations electra_cf_ops = { |
| .init = electra_cf_ss_init, |
| .get_status = electra_cf_get_status, |
| .set_socket = electra_cf_set_socket, |
| .set_io_map = electra_cf_set_io_map, |
| .set_mem_map = electra_cf_set_mem_map, |
| }; |
| |
| static int electra_cf_probe(struct platform_device *ofdev) |
| { |
| struct device *device = &ofdev->dev; |
| struct device_node *np = ofdev->dev.of_node; |
| struct electra_cf_socket *cf; |
| struct resource mem, io; |
| int status = -ENOMEM; |
| const unsigned int *prop; |
| int err; |
| |
| err = of_address_to_resource(np, 0, &mem); |
| if (err) |
| return -EINVAL; |
| |
| err = of_address_to_resource(np, 1, &io); |
| if (err) |
| return -EINVAL; |
| |
| cf = kzalloc(sizeof(*cf), GFP_KERNEL); |
| if (!cf) |
| return -ENOMEM; |
| |
| timer_setup(&cf->timer, electra_cf_timer, 0); |
| cf->irq = 0; |
| |
| cf->ofdev = ofdev; |
| cf->mem_phys = mem.start; |
| cf->mem_size = PAGE_ALIGN(resource_size(&mem)); |
| cf->mem_base = ioremap(cf->mem_phys, cf->mem_size); |
| if (!cf->mem_base) |
| goto out_free_cf; |
| cf->io_size = PAGE_ALIGN(resource_size(&io)); |
| cf->io_virt = ioremap_phb(io.start, cf->io_size); |
| if (!cf->io_virt) |
| goto out_unmap_mem; |
| |
| cf->gpio_base = ioremap(0xfc103000, 0x1000); |
| if (!cf->gpio_base) |
| goto out_unmap_virt; |
| dev_set_drvdata(device, cf); |
| |
| cf->io_base = (unsigned long)cf->io_virt - VMALLOC_END; |
| cf->iomem.start = (unsigned long)cf->mem_base; |
| cf->iomem.end = (unsigned long)cf->mem_base + (mem.end - mem.start); |
| cf->iomem.flags = IORESOURCE_MEM; |
| |
| cf->irq = irq_of_parse_and_map(np, 0); |
| |
| status = request_irq(cf->irq, electra_cf_irq, IRQF_SHARED, |
| driver_name, cf); |
| if (status < 0) { |
| dev_err(device, "request_irq failed\n"); |
| goto fail1; |
| } |
| |
| cf->socket.pci_irq = cf->irq; |
| |
| status = -EINVAL; |
| |
| prop = of_get_property(np, "card-detect-gpio", NULL); |
| if (!prop) |
| goto fail1; |
| cf->gpio_detect = *prop; |
| |
| prop = of_get_property(np, "card-vsense-gpio", NULL); |
| if (!prop) |
| goto fail1; |
| cf->gpio_vsense = *prop; |
| |
| prop = of_get_property(np, "card-3v-gpio", NULL); |
| if (!prop) |
| goto fail1; |
| cf->gpio_3v = *prop; |
| |
| prop = of_get_property(np, "card-5v-gpio", NULL); |
| if (!prop) |
| goto fail1; |
| cf->gpio_5v = *prop; |
| |
| cf->socket.io_offset = cf->io_base; |
| |
| /* reserve chip-select regions */ |
| if (!request_mem_region(cf->mem_phys, cf->mem_size, driver_name)) { |
| status = -ENXIO; |
| dev_err(device, "Can't claim memory region\n"); |
| goto fail1; |
| } |
| |
| if (!request_region(cf->io_base, cf->io_size, driver_name)) { |
| status = -ENXIO; |
| dev_err(device, "Can't claim I/O region\n"); |
| goto fail2; |
| } |
| |
| cf->socket.owner = THIS_MODULE; |
| cf->socket.dev.parent = &ofdev->dev; |
| cf->socket.ops = &electra_cf_ops; |
| cf->socket.resource_ops = &pccard_static_ops; |
| cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP | |
| SS_CAP_MEM_ALIGN; |
| cf->socket.map_size = 0x800; |
| |
| status = pcmcia_register_socket(&cf->socket); |
| if (status < 0) { |
| dev_err(device, "pcmcia_register_socket failed\n"); |
| goto fail3; |
| } |
| |
| dev_info(device, "at mem 0x%lx io 0x%llx irq %d\n", |
| cf->mem_phys, io.start, cf->irq); |
| |
| cf->active = 1; |
| electra_cf_timer(&cf->timer); |
| return 0; |
| |
| fail3: |
| release_region(cf->io_base, cf->io_size); |
| fail2: |
| release_mem_region(cf->mem_phys, cf->mem_size); |
| fail1: |
| if (cf->irq) |
| free_irq(cf->irq, cf); |
| |
| iounmap(cf->gpio_base); |
| out_unmap_virt: |
| device_init_wakeup(&ofdev->dev, 0); |
| iounmap(cf->io_virt); |
| out_unmap_mem: |
| iounmap(cf->mem_base); |
| out_free_cf: |
| kfree(cf); |
| return status; |
| |
| } |
| |
| static void electra_cf_remove(struct platform_device *ofdev) |
| { |
| struct device *device = &ofdev->dev; |
| struct electra_cf_socket *cf; |
| |
| cf = dev_get_drvdata(device); |
| |
| cf->active = 0; |
| pcmcia_unregister_socket(&cf->socket); |
| free_irq(cf->irq, cf); |
| timer_shutdown_sync(&cf->timer); |
| |
| iounmap(cf->io_virt); |
| iounmap(cf->mem_base); |
| iounmap(cf->gpio_base); |
| release_mem_region(cf->mem_phys, cf->mem_size); |
| release_region(cf->io_base, cf->io_size); |
| |
| kfree(cf); |
| } |
| |
| static const struct of_device_id electra_cf_match[] = { |
| { |
| .compatible = "electra-cf", |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, electra_cf_match); |
| |
| static struct platform_driver electra_cf_driver = { |
| .driver = { |
| .name = driver_name, |
| .of_match_table = electra_cf_match, |
| }, |
| .probe = electra_cf_probe, |
| .remove_new = electra_cf_remove, |
| }; |
| |
| module_platform_driver(electra_cf_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Olof Johansson <olof@lixom.net>"); |
| MODULE_DESCRIPTION("PA Semi Electra CF driver"); |