| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Meson G12A MIPI DSI Analog PHY |
| * |
| * Copyright (C) 2018 Amlogic, Inc. All rights reserved |
| * Copyright (C) 2022 BayLibre, SAS |
| * Author: Neil Armstrong <narmstrong@baylibre.com> |
| */ |
| #include <linux/bitfield.h> |
| #include <linux/bitops.h> |
| #include <linux/module.h> |
| #include <linux/phy/phy.h> |
| #include <linux/regmap.h> |
| #include <linux/delay.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <dt-bindings/phy/phy.h> |
| |
| #define HHI_MIPI_CNTL0 0x00 |
| #define HHI_MIPI_CNTL0_DIF_REF_CTL1 GENMASK(31, 16) |
| #define HHI_MIPI_CNTL0_DIF_REF_CTL0 GENMASK(15, 0) |
| |
| #define HHI_MIPI_CNTL1 0x04 |
| #define HHI_MIPI_CNTL1_BANDGAP BIT(16) |
| #define HHI_MIPI_CNTL2_DIF_REF_CTL2 GENMASK(15, 0) |
| |
| #define HHI_MIPI_CNTL2 0x08 |
| #define HHI_MIPI_CNTL2_DIF_TX_CTL1 GENMASK(31, 16) |
| #define HHI_MIPI_CNTL2_CH_EN GENMASK(15, 11) |
| #define HHI_MIPI_CNTL2_DIF_TX_CTL0 GENMASK(10, 0) |
| |
| #define DSI_LANE_0 BIT(4) |
| #define DSI_LANE_1 BIT(3) |
| #define DSI_LANE_CLK BIT(2) |
| #define DSI_LANE_2 BIT(1) |
| #define DSI_LANE_3 BIT(0) |
| |
| struct phy_g12a_mipi_dphy_analog_priv { |
| struct phy *phy; |
| struct regmap *regmap; |
| struct phy_configure_opts_mipi_dphy config; |
| }; |
| |
| static int phy_g12a_mipi_dphy_analog_configure(struct phy *phy, |
| union phy_configure_opts *opts) |
| { |
| struct phy_g12a_mipi_dphy_analog_priv *priv = phy_get_drvdata(phy); |
| int ret; |
| |
| ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy); |
| if (ret) |
| return ret; |
| |
| memcpy(&priv->config, opts, sizeof(priv->config)); |
| |
| return 0; |
| } |
| |
| static int phy_g12a_mipi_dphy_analog_power_on(struct phy *phy) |
| { |
| struct phy_g12a_mipi_dphy_analog_priv *priv = phy_get_drvdata(phy); |
| unsigned int reg; |
| |
| regmap_write(priv->regmap, HHI_MIPI_CNTL0, |
| FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL0, 0x8) | |
| FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0xa487)); |
| |
| regmap_write(priv->regmap, HHI_MIPI_CNTL1, |
| FIELD_PREP(HHI_MIPI_CNTL2_DIF_REF_CTL2, 0x2e) | |
| HHI_MIPI_CNTL1_BANDGAP); |
| |
| regmap_write(priv->regmap, HHI_MIPI_CNTL2, |
| FIELD_PREP(HHI_MIPI_CNTL2_DIF_TX_CTL0, 0x45a) | |
| FIELD_PREP(HHI_MIPI_CNTL2_DIF_TX_CTL1, 0x2680)); |
| |
| reg = DSI_LANE_CLK; |
| switch (priv->config.lanes) { |
| case 4: |
| reg |= DSI_LANE_3; |
| fallthrough; |
| case 3: |
| reg |= DSI_LANE_2; |
| fallthrough; |
| case 2: |
| reg |= DSI_LANE_1; |
| fallthrough; |
| case 1: |
| reg |= DSI_LANE_0; |
| break; |
| default: |
| reg = 0; |
| } |
| |
| regmap_update_bits(priv->regmap, HHI_MIPI_CNTL2, |
| HHI_MIPI_CNTL2_CH_EN, |
| FIELD_PREP(HHI_MIPI_CNTL2_CH_EN, reg)); |
| |
| return 0; |
| } |
| |
| static int phy_g12a_mipi_dphy_analog_power_off(struct phy *phy) |
| { |
| struct phy_g12a_mipi_dphy_analog_priv *priv = phy_get_drvdata(phy); |
| |
| regmap_write(priv->regmap, HHI_MIPI_CNTL0, 0); |
| regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0); |
| regmap_write(priv->regmap, HHI_MIPI_CNTL2, 0); |
| |
| return 0; |
| } |
| |
| static const struct phy_ops phy_g12a_mipi_dphy_analog_ops = { |
| .configure = phy_g12a_mipi_dphy_analog_configure, |
| .power_on = phy_g12a_mipi_dphy_analog_power_on, |
| .power_off = phy_g12a_mipi_dphy_analog_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int phy_g12a_mipi_dphy_analog_probe(struct platform_device *pdev) |
| { |
| struct phy_provider *phy; |
| struct device *dev = &pdev->dev; |
| struct phy_g12a_mipi_dphy_analog_priv *priv; |
| struct device_node *np = dev->of_node, *parent_np; |
| struct regmap *map; |
| |
| priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| /* Get the hhi system controller node */ |
| parent_np = of_get_parent(np); |
| map = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(map)) |
| return dev_err_probe(dev, PTR_ERR(map), "failed to get HHI regmap\n"); |
| |
| priv->regmap = map; |
| |
| priv->phy = devm_phy_create(dev, np, &phy_g12a_mipi_dphy_analog_ops); |
| if (IS_ERR(priv->phy)) |
| return dev_err_probe(dev, PTR_ERR(priv->phy), "failed to create PHY\n"); |
| |
| phy_set_drvdata(priv->phy, priv); |
| dev_set_drvdata(dev, priv); |
| |
| phy = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| |
| return PTR_ERR_OR_ZERO(phy); |
| } |
| |
| static const struct of_device_id phy_g12a_mipi_dphy_analog_of_match[] = { |
| { |
| .compatible = "amlogic,g12a-mipi-dphy-analog", |
| }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, phy_g12a_mipi_dphy_analog_of_match); |
| |
| static struct platform_driver phy_g12a_mipi_dphy_analog_driver = { |
| .probe = phy_g12a_mipi_dphy_analog_probe, |
| .driver = { |
| .name = "phy-meson-g12a-mipi-dphy-analog", |
| .of_match_table = phy_g12a_mipi_dphy_analog_of_match, |
| }, |
| }; |
| module_platform_driver(phy_g12a_mipi_dphy_analog_driver); |
| |
| MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); |
| MODULE_DESCRIPTION("Meson G12A MIPI Analog D-PHY driver"); |
| MODULE_LICENSE("GPL v2"); |