| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // FAN53555 Fairchild Digitally Programmable TinyBuck Regulator Driver. |
| // |
| // Supported Part Numbers: |
| // FAN53555UC00X/01X/03X/04X/05X |
| // |
| // Copyright (c) 2012 Marvell Technology Ltd. |
| // Yunfan Zhang <yfzhang@marvell.com> |
| |
| #include <linux/bitops.h> |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/param.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/fan53555.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/slab.h> |
| |
| /* Voltage setting */ |
| #define FAN53555_VSEL0 0x00 |
| #define FAN53555_VSEL1 0x01 |
| |
| #define RK8602_VSEL0 0x06 |
| #define RK8602_VSEL1 0x07 |
| |
| #define TCS4525_VSEL0 0x11 |
| #define TCS4525_VSEL1 0x10 |
| #define TCS4525_TIME 0x13 |
| #define TCS4525_COMMAND 0x14 |
| |
| /* Control register */ |
| #define FAN53555_CONTROL 0x02 |
| /* IC Type */ |
| #define FAN53555_ID1 0x03 |
| /* IC mask version */ |
| #define FAN53555_ID2 0x04 |
| /* Monitor register */ |
| #define FAN53555_MONITOR 0x05 |
| |
| /* VSEL bit definitions */ |
| #define VSEL_BUCK_EN BIT(7) |
| #define VSEL_MODE BIT(6) |
| /* Chip ID and Verison */ |
| #define DIE_ID 0x0F /* ID1 */ |
| #define DIE_REV 0x0F /* ID2 */ |
| /* Control bit definitions */ |
| #define CTL_OUTPUT_DISCHG BIT(7) |
| #define CTL_SLEW_MASK GENMASK(6, 4) |
| #define CTL_RESET BIT(2) |
| #define CTL_MODE_VSEL0_MODE BIT(0) |
| #define CTL_MODE_VSEL1_MODE BIT(1) |
| |
| #define FAN53555_NVOLTAGES 64 /* Numbers of voltages */ |
| #define FAN53526_NVOLTAGES 128 |
| #define RK8602_NVOLTAGES 160 |
| |
| #define TCS_VSEL0_MODE BIT(7) |
| #define TCS_VSEL1_MODE BIT(6) |
| |
| #define TCS_SLEW_MASK GENMASK(4, 3) |
| |
| enum fan53555_vendor { |
| FAN53526_VENDOR_FAIRCHILD = 0, |
| FAN53555_VENDOR_FAIRCHILD, |
| FAN53555_VENDOR_ROCKCHIP, /* RK8600, RK8601 */ |
| RK8602_VENDOR_ROCKCHIP, /* RK8602, RK8603 */ |
| FAN53555_VENDOR_SILERGY, |
| FAN53526_VENDOR_TCS, |
| }; |
| |
| enum { |
| FAN53526_CHIP_ID_01 = 1, |
| }; |
| |
| enum { |
| FAN53526_CHIP_REV_08 = 8, |
| }; |
| |
| /* IC Type */ |
| enum { |
| FAN53555_CHIP_ID_00 = 0, |
| FAN53555_CHIP_ID_01, |
| FAN53555_CHIP_ID_02, |
| FAN53555_CHIP_ID_03, |
| FAN53555_CHIP_ID_04, |
| FAN53555_CHIP_ID_05, |
| FAN53555_CHIP_ID_08 = 8, |
| }; |
| |
| enum { |
| RK8600_CHIP_ID_08 = 8, /* RK8600, RK8601 */ |
| }; |
| |
| enum { |
| RK8602_CHIP_ID_10 = 10, /* RK8602, RK8603 */ |
| }; |
| |
| enum { |
| TCS4525_CHIP_ID_12 = 12, |
| }; |
| |
| enum { |
| TCS4526_CHIP_ID_00 = 0, |
| }; |
| |
| /* IC mask revision */ |
| enum { |
| FAN53555_CHIP_REV_00 = 0x3, |
| FAN53555_CHIP_REV_13 = 0xf, |
| }; |
| |
| enum { |
| SILERGY_SYR82X = 8, |
| SILERGY_SYR83X = 9, |
| }; |
| |
| struct fan53555_device_info { |
| enum fan53555_vendor vendor; |
| struct device *dev; |
| struct regulator_desc desc; |
| struct regulator_init_data *regulator; |
| /* IC Type and Rev */ |
| int chip_id; |
| int chip_rev; |
| /* Voltage setting register */ |
| unsigned int vol_reg; |
| unsigned int sleep_reg; |
| unsigned int en_reg; |
| unsigned int sleep_en_reg; |
| /* Voltage range and step(linear) */ |
| unsigned int vsel_min; |
| unsigned int vsel_step; |
| unsigned int vsel_count; |
| /* Mode */ |
| unsigned int mode_reg; |
| unsigned int mode_mask; |
| /* Sleep voltage cache */ |
| unsigned int sleep_vol_cache; |
| /* Slew rate */ |
| unsigned int slew_reg; |
| unsigned int slew_mask; |
| const unsigned int *ramp_delay_table; |
| unsigned int n_ramp_values; |
| unsigned int slew_rate; |
| }; |
| |
| static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV) |
| { |
| struct fan53555_device_info *di = rdev_get_drvdata(rdev); |
| int ret; |
| |
| if (di->sleep_vol_cache == uV) |
| return 0; |
| ret = regulator_map_voltage_linear(rdev, uV, uV); |
| if (ret < 0) |
| return ret; |
| ret = regmap_update_bits(rdev->regmap, di->sleep_reg, |
| di->desc.vsel_mask, ret); |
| if (ret < 0) |
| return ret; |
| /* Cache the sleep voltage setting. |
| * Might not be the real voltage which is rounded */ |
| di->sleep_vol_cache = uV; |
| |
| return 0; |
| } |
| |
| static int fan53555_set_suspend_enable(struct regulator_dev *rdev) |
| { |
| struct fan53555_device_info *di = rdev_get_drvdata(rdev); |
| |
| return regmap_update_bits(rdev->regmap, di->sleep_en_reg, |
| VSEL_BUCK_EN, VSEL_BUCK_EN); |
| } |
| |
| static int fan53555_set_suspend_disable(struct regulator_dev *rdev) |
| { |
| struct fan53555_device_info *di = rdev_get_drvdata(rdev); |
| |
| return regmap_update_bits(rdev->regmap, di->sleep_en_reg, |
| VSEL_BUCK_EN, 0); |
| } |
| |
| static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| { |
| struct fan53555_device_info *di = rdev_get_drvdata(rdev); |
| |
| switch (mode) { |
| case REGULATOR_MODE_FAST: |
| regmap_update_bits(rdev->regmap, di->mode_reg, |
| di->mode_mask, di->mode_mask); |
| break; |
| case REGULATOR_MODE_NORMAL: |
| regmap_update_bits(rdev->regmap, di->vol_reg, di->mode_mask, 0); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static unsigned int fan53555_get_mode(struct regulator_dev *rdev) |
| { |
| struct fan53555_device_info *di = rdev_get_drvdata(rdev); |
| unsigned int val; |
| int ret = 0; |
| |
| ret = regmap_read(rdev->regmap, di->mode_reg, &val); |
| if (ret < 0) |
| return ret; |
| if (val & di->mode_mask) |
| return REGULATOR_MODE_FAST; |
| else |
| return REGULATOR_MODE_NORMAL; |
| } |
| |
| static const unsigned int slew_rates[] = { |
| 64000, |
| 32000, |
| 16000, |
| 8000, |
| 4000, |
| 2000, |
| 1000, |
| 500, |
| }; |
| |
| static const unsigned int tcs_slew_rates[] = { |
| 18700, |
| 9300, |
| 4600, |
| 2300, |
| }; |
| |
| static const struct regulator_ops fan53555_regulator_ops = { |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| .map_voltage = regulator_map_voltage_linear, |
| .list_voltage = regulator_list_voltage_linear, |
| .set_suspend_voltage = fan53555_set_suspend_voltage, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .set_mode = fan53555_set_mode, |
| .get_mode = fan53555_get_mode, |
| .set_ramp_delay = regulator_set_ramp_delay_regmap, |
| .set_suspend_enable = fan53555_set_suspend_enable, |
| .set_suspend_disable = fan53555_set_suspend_disable, |
| }; |
| |
| static int fan53526_voltages_setup_fairchild(struct fan53555_device_info *di) |
| { |
| /* Init voltage range and step */ |
| switch (di->chip_id) { |
| case FAN53526_CHIP_ID_01: |
| switch (di->chip_rev) { |
| case FAN53526_CHIP_REV_08: |
| di->vsel_min = 600000; |
| di->vsel_step = 6250; |
| break; |
| default: |
| dev_err(di->dev, |
| "Chip ID %d with rev %d not supported!\n", |
| di->chip_id, di->chip_rev); |
| return -EINVAL; |
| } |
| break; |
| default: |
| dev_err(di->dev, |
| "Chip ID %d not supported!\n", di->chip_id); |
| return -EINVAL; |
| } |
| |
| di->slew_reg = FAN53555_CONTROL; |
| di->slew_mask = CTL_SLEW_MASK; |
| di->ramp_delay_table = slew_rates; |
| di->n_ramp_values = ARRAY_SIZE(slew_rates); |
| di->vsel_count = FAN53526_NVOLTAGES; |
| |
| return 0; |
| } |
| |
| static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di) |
| { |
| /* Init voltage range and step */ |
| switch (di->chip_id) { |
| case FAN53555_CHIP_ID_00: |
| switch (di->chip_rev) { |
| case FAN53555_CHIP_REV_00: |
| di->vsel_min = 600000; |
| di->vsel_step = 10000; |
| break; |
| case FAN53555_CHIP_REV_13: |
| di->vsel_min = 800000; |
| di->vsel_step = 10000; |
| break; |
| default: |
| dev_err(di->dev, |
| "Chip ID %d with rev %d not supported!\n", |
| di->chip_id, di->chip_rev); |
| return -EINVAL; |
| } |
| break; |
| case FAN53555_CHIP_ID_01: |
| case FAN53555_CHIP_ID_03: |
| case FAN53555_CHIP_ID_05: |
| case FAN53555_CHIP_ID_08: |
| di->vsel_min = 600000; |
| di->vsel_step = 10000; |
| break; |
| case FAN53555_CHIP_ID_04: |
| di->vsel_min = 603000; |
| di->vsel_step = 12826; |
| break; |
| default: |
| dev_err(di->dev, |
| "Chip ID %d not supported!\n", di->chip_id); |
| return -EINVAL; |
| } |
| di->slew_reg = FAN53555_CONTROL; |
| di->slew_mask = CTL_SLEW_MASK; |
| di->ramp_delay_table = slew_rates; |
| di->n_ramp_values = ARRAY_SIZE(slew_rates); |
| di->vsel_count = FAN53555_NVOLTAGES; |
| |
| return 0; |
| } |
| |
| static int fan53555_voltages_setup_rockchip(struct fan53555_device_info *di) |
| { |
| /* Init voltage range and step */ |
| switch (di->chip_id) { |
| case RK8600_CHIP_ID_08: |
| di->vsel_min = 712500; |
| di->vsel_step = 12500; |
| break; |
| default: |
| dev_err(di->dev, |
| "Chip ID %d not supported!\n", di->chip_id); |
| return -EINVAL; |
| } |
| di->slew_reg = FAN53555_CONTROL; |
| di->slew_mask = CTL_SLEW_MASK; |
| di->ramp_delay_table = slew_rates; |
| di->n_ramp_values = ARRAY_SIZE(slew_rates); |
| di->vsel_count = FAN53555_NVOLTAGES; |
| |
| return 0; |
| } |
| |
| static int rk8602_voltages_setup_rockchip(struct fan53555_device_info *di) |
| { |
| /* Init voltage range and step */ |
| switch (di->chip_id) { |
| case RK8602_CHIP_ID_10: |
| di->vsel_min = 500000; |
| di->vsel_step = 6250; |
| break; |
| default: |
| dev_err(di->dev, |
| "Chip ID %d not supported!\n", di->chip_id); |
| return -EINVAL; |
| } |
| di->slew_reg = FAN53555_CONTROL; |
| di->slew_mask = CTL_SLEW_MASK; |
| di->ramp_delay_table = slew_rates; |
| di->n_ramp_values = ARRAY_SIZE(slew_rates); |
| di->vsel_count = RK8602_NVOLTAGES; |
| |
| return 0; |
| } |
| |
| static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di) |
| { |
| /* Init voltage range and step */ |
| switch (di->chip_id) { |
| case SILERGY_SYR82X: |
| case SILERGY_SYR83X: |
| di->vsel_min = 712500; |
| di->vsel_step = 12500; |
| break; |
| default: |
| dev_err(di->dev, |
| "Chip ID %d not supported!\n", di->chip_id); |
| return -EINVAL; |
| } |
| di->slew_reg = FAN53555_CONTROL; |
| di->slew_mask = CTL_SLEW_MASK; |
| di->ramp_delay_table = slew_rates; |
| di->n_ramp_values = ARRAY_SIZE(slew_rates); |
| di->vsel_count = FAN53555_NVOLTAGES; |
| |
| return 0; |
| } |
| |
| static int fan53526_voltages_setup_tcs(struct fan53555_device_info *di) |
| { |
| switch (di->chip_id) { |
| case TCS4525_CHIP_ID_12: |
| case TCS4526_CHIP_ID_00: |
| di->slew_reg = TCS4525_TIME; |
| di->slew_mask = TCS_SLEW_MASK; |
| di->ramp_delay_table = tcs_slew_rates; |
| di->n_ramp_values = ARRAY_SIZE(tcs_slew_rates); |
| |
| /* Init voltage range and step */ |
| di->vsel_min = 600000; |
| di->vsel_step = 6250; |
| di->vsel_count = FAN53526_NVOLTAGES; |
| break; |
| default: |
| dev_err(di->dev, "Chip ID %d not supported!\n", di->chip_id); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* For 00,01,03,05 options: |
| * VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V. |
| * For 04 option: |
| * VOUT = 0.603V + NSELx * 12.826mV, from 0.603 to 1.411V. |
| * */ |
| static int fan53555_device_setup(struct fan53555_device_info *di, |
| struct fan53555_platform_data *pdata) |
| { |
| int ret = 0; |
| |
| /* Setup voltage control register */ |
| switch (di->vendor) { |
| case FAN53526_VENDOR_FAIRCHILD: |
| case FAN53555_VENDOR_FAIRCHILD: |
| case FAN53555_VENDOR_ROCKCHIP: |
| case FAN53555_VENDOR_SILERGY: |
| switch (pdata->sleep_vsel_id) { |
| case FAN53555_VSEL_ID_0: |
| di->sleep_reg = FAN53555_VSEL0; |
| di->vol_reg = FAN53555_VSEL1; |
| break; |
| case FAN53555_VSEL_ID_1: |
| di->sleep_reg = FAN53555_VSEL1; |
| di->vol_reg = FAN53555_VSEL0; |
| break; |
| default: |
| dev_err(di->dev, "Invalid VSEL ID!\n"); |
| return -EINVAL; |
| } |
| di->sleep_en_reg = di->sleep_reg; |
| di->en_reg = di->vol_reg; |
| break; |
| case RK8602_VENDOR_ROCKCHIP: |
| switch (pdata->sleep_vsel_id) { |
| case FAN53555_VSEL_ID_0: |
| di->sleep_reg = RK8602_VSEL0; |
| di->vol_reg = RK8602_VSEL1; |
| di->sleep_en_reg = FAN53555_VSEL0; |
| di->en_reg = FAN53555_VSEL1; |
| break; |
| case FAN53555_VSEL_ID_1: |
| di->sleep_reg = RK8602_VSEL1; |
| di->vol_reg = RK8602_VSEL0; |
| di->sleep_en_reg = FAN53555_VSEL1; |
| di->en_reg = FAN53555_VSEL0; |
| break; |
| default: |
| dev_err(di->dev, "Invalid VSEL ID!\n"); |
| return -EINVAL; |
| } |
| break; |
| case FAN53526_VENDOR_TCS: |
| switch (pdata->sleep_vsel_id) { |
| case FAN53555_VSEL_ID_0: |
| di->sleep_reg = TCS4525_VSEL0; |
| di->vol_reg = TCS4525_VSEL1; |
| break; |
| case FAN53555_VSEL_ID_1: |
| di->sleep_reg = TCS4525_VSEL1; |
| di->vol_reg = TCS4525_VSEL0; |
| break; |
| default: |
| dev_err(di->dev, "Invalid VSEL ID!\n"); |
| return -EINVAL; |
| } |
| di->sleep_en_reg = di->sleep_reg; |
| di->en_reg = di->vol_reg; |
| break; |
| default: |
| dev_err(di->dev, "vendor %d not supported!\n", di->vendor); |
| return -EINVAL; |
| } |
| |
| /* Setup mode control register */ |
| switch (di->vendor) { |
| case FAN53526_VENDOR_FAIRCHILD: |
| di->mode_reg = FAN53555_CONTROL; |
| |
| switch (pdata->sleep_vsel_id) { |
| case FAN53555_VSEL_ID_0: |
| di->mode_mask = CTL_MODE_VSEL1_MODE; |
| break; |
| case FAN53555_VSEL_ID_1: |
| di->mode_mask = CTL_MODE_VSEL0_MODE; |
| break; |
| } |
| break; |
| case FAN53555_VENDOR_FAIRCHILD: |
| case FAN53555_VENDOR_ROCKCHIP: |
| case FAN53555_VENDOR_SILERGY: |
| di->mode_reg = di->vol_reg; |
| di->mode_mask = VSEL_MODE; |
| break; |
| case RK8602_VENDOR_ROCKCHIP: |
| di->mode_mask = VSEL_MODE; |
| |
| switch (pdata->sleep_vsel_id) { |
| case FAN53555_VSEL_ID_0: |
| di->mode_reg = FAN53555_VSEL1; |
| break; |
| case FAN53555_VSEL_ID_1: |
| di->mode_reg = FAN53555_VSEL0; |
| break; |
| } |
| break; |
| case FAN53526_VENDOR_TCS: |
| di->mode_reg = TCS4525_COMMAND; |
| |
| switch (pdata->sleep_vsel_id) { |
| case FAN53555_VSEL_ID_0: |
| di->mode_mask = TCS_VSEL1_MODE; |
| break; |
| case FAN53555_VSEL_ID_1: |
| di->mode_mask = TCS_VSEL0_MODE; |
| break; |
| } |
| break; |
| default: |
| dev_err(di->dev, "vendor %d not supported!\n", di->vendor); |
| return -EINVAL; |
| } |
| |
| /* Setup voltage range */ |
| switch (di->vendor) { |
| case FAN53526_VENDOR_FAIRCHILD: |
| ret = fan53526_voltages_setup_fairchild(di); |
| break; |
| case FAN53555_VENDOR_FAIRCHILD: |
| ret = fan53555_voltages_setup_fairchild(di); |
| break; |
| case FAN53555_VENDOR_ROCKCHIP: |
| ret = fan53555_voltages_setup_rockchip(di); |
| break; |
| case RK8602_VENDOR_ROCKCHIP: |
| ret = rk8602_voltages_setup_rockchip(di); |
| break; |
| case FAN53555_VENDOR_SILERGY: |
| ret = fan53555_voltages_setup_silergy(di); |
| break; |
| case FAN53526_VENDOR_TCS: |
| ret = fan53526_voltages_setup_tcs(di); |
| break; |
| default: |
| dev_err(di->dev, "vendor %d not supported!\n", di->vendor); |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int fan53555_regulator_register(struct fan53555_device_info *di, |
| struct regulator_config *config) |
| { |
| struct regulator_desc *rdesc = &di->desc; |
| struct regulator_dev *rdev; |
| |
| rdesc->name = "fan53555-reg"; |
| rdesc->supply_name = "vin"; |
| rdesc->ops = &fan53555_regulator_ops; |
| rdesc->type = REGULATOR_VOLTAGE; |
| rdesc->n_voltages = di->vsel_count; |
| rdesc->enable_reg = di->en_reg; |
| rdesc->enable_mask = VSEL_BUCK_EN; |
| rdesc->min_uV = di->vsel_min; |
| rdesc->uV_step = di->vsel_step; |
| rdesc->vsel_reg = di->vol_reg; |
| rdesc->vsel_mask = BIT(fls(di->vsel_count - 1)) - 1; |
| rdesc->ramp_reg = di->slew_reg; |
| rdesc->ramp_mask = di->slew_mask; |
| rdesc->ramp_delay_table = di->ramp_delay_table; |
| rdesc->n_ramp_values = di->n_ramp_values; |
| rdesc->owner = THIS_MODULE; |
| |
| rdev = devm_regulator_register(di->dev, &di->desc, config); |
| return PTR_ERR_OR_ZERO(rdev); |
| } |
| |
| static const struct regmap_config fan53555_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| }; |
| |
| static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev, |
| struct device_node *np, |
| const struct regulator_desc *desc) |
| { |
| struct fan53555_platform_data *pdata; |
| int ret; |
| u32 tmp; |
| |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return NULL; |
| |
| pdata->regulator = of_get_regulator_init_data(dev, np, desc); |
| |
| ret = of_property_read_u32(np, "fcs,suspend-voltage-selector", |
| &tmp); |
| if (!ret) |
| pdata->sleep_vsel_id = tmp; |
| |
| return pdata; |
| } |
| |
| static const struct of_device_id __maybe_unused fan53555_dt_ids[] = { |
| { |
| .compatible = "fcs,fan53526", |
| .data = (void *)FAN53526_VENDOR_FAIRCHILD, |
| }, { |
| .compatible = "fcs,fan53555", |
| .data = (void *)FAN53555_VENDOR_FAIRCHILD |
| }, { |
| .compatible = "rockchip,rk8600", |
| .data = (void *)FAN53555_VENDOR_ROCKCHIP |
| }, { |
| .compatible = "rockchip,rk8602", |
| .data = (void *)RK8602_VENDOR_ROCKCHIP |
| }, { |
| .compatible = "silergy,syr827", |
| .data = (void *)FAN53555_VENDOR_SILERGY, |
| }, { |
| .compatible = "silergy,syr828", |
| .data = (void *)FAN53555_VENDOR_SILERGY, |
| }, { |
| .compatible = "tcs,tcs4525", |
| .data = (void *)FAN53526_VENDOR_TCS |
| }, { |
| .compatible = "tcs,tcs4526", |
| .data = (void *)FAN53526_VENDOR_TCS |
| }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, fan53555_dt_ids); |
| |
| static int fan53555_regulator_probe(struct i2c_client *client) |
| { |
| struct device_node *np = client->dev.of_node; |
| struct fan53555_device_info *di; |
| struct fan53555_platform_data *pdata; |
| struct regulator_config config = { }; |
| struct regmap *regmap; |
| unsigned int val; |
| int ret; |
| |
| di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info), |
| GFP_KERNEL); |
| if (!di) |
| return -ENOMEM; |
| |
| pdata = dev_get_platdata(&client->dev); |
| if (!pdata) |
| pdata = fan53555_parse_dt(&client->dev, np, &di->desc); |
| |
| if (!pdata || !pdata->regulator) |
| return dev_err_probe(&client->dev, -ENODEV, |
| "Platform data not found!\n"); |
| |
| di->regulator = pdata->regulator; |
| di->vendor = (uintptr_t)i2c_get_match_data(client); |
| if (!dev_fwnode(&client->dev)) { |
| /* if no ramp constraint set, get the pdata ramp_delay */ |
| if (!di->regulator->constraints.ramp_delay) { |
| if (pdata->slew_rate >= ARRAY_SIZE(slew_rates)) |
| return dev_err_probe(&client->dev, -EINVAL, |
| "Invalid slew_rate\n"); |
| |
| di->regulator->constraints.ramp_delay |
| = slew_rates[pdata->slew_rate]; |
| } |
| } |
| |
| regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config); |
| if (IS_ERR(regmap)) |
| return dev_err_probe(&client->dev, PTR_ERR(regmap), |
| "Failed to allocate regmap!\n"); |
| |
| di->dev = &client->dev; |
| i2c_set_clientdata(client, di); |
| /* Get chip ID */ |
| ret = regmap_read(regmap, FAN53555_ID1, &val); |
| if (ret < 0) |
| return dev_err_probe(&client->dev, ret, "Failed to get chip ID!\n"); |
| |
| di->chip_id = val & DIE_ID; |
| /* Get chip revision */ |
| ret = regmap_read(regmap, FAN53555_ID2, &val); |
| if (ret < 0) |
| return dev_err_probe(&client->dev, ret, "Failed to get chip Rev!\n"); |
| |
| di->chip_rev = val & DIE_REV; |
| dev_info(&client->dev, "FAN53555 Option[%d] Rev[%d] Detected!\n", |
| di->chip_id, di->chip_rev); |
| /* Device init */ |
| ret = fan53555_device_setup(di, pdata); |
| if (ret < 0) |
| return dev_err_probe(&client->dev, ret, "Failed to setup device!\n"); |
| |
| /* Register regulator */ |
| config.dev = di->dev; |
| config.init_data = di->regulator; |
| config.regmap = regmap; |
| config.driver_data = di; |
| config.of_node = np; |
| |
| ret = fan53555_regulator_register(di, &config); |
| if (ret < 0) |
| dev_err_probe(&client->dev, ret, "Failed to register regulator!\n"); |
| |
| return ret; |
| } |
| |
| static const struct i2c_device_id fan53555_id[] = { |
| { |
| .name = "fan53526", |
| .driver_data = FAN53526_VENDOR_FAIRCHILD |
| }, { |
| .name = "fan53555", |
| .driver_data = FAN53555_VENDOR_FAIRCHILD |
| }, { |
| .name = "rk8600", |
| .driver_data = FAN53555_VENDOR_ROCKCHIP |
| }, { |
| .name = "rk8602", |
| .driver_data = RK8602_VENDOR_ROCKCHIP |
| }, { |
| .name = "syr827", |
| .driver_data = FAN53555_VENDOR_SILERGY |
| }, { |
| .name = "syr828", |
| .driver_data = FAN53555_VENDOR_SILERGY |
| }, { |
| .name = "tcs4525", |
| .driver_data = FAN53526_VENDOR_TCS |
| }, { |
| .name = "tcs4526", |
| .driver_data = FAN53526_VENDOR_TCS |
| }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, fan53555_id); |
| |
| static struct i2c_driver fan53555_regulator_driver = { |
| .driver = { |
| .name = "fan53555-regulator", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| .of_match_table = of_match_ptr(fan53555_dt_ids), |
| }, |
| .probe = fan53555_regulator_probe, |
| .id_table = fan53555_id, |
| }; |
| |
| module_i2c_driver(fan53555_regulator_driver); |
| |
| MODULE_AUTHOR("Yunfan Zhang <yfzhang@marvell.com>"); |
| MODULE_DESCRIPTION("FAN53555 regulator driver"); |
| MODULE_LICENSE("GPL v2"); |