drivers/target/target_core_ua.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-or-later
 /*******************************************************************************
  * Filename: target_core_ua.c
  *
  * This file contains logic for SPC-3 Unit Attention emulation
  *
  * (c) Copyright 2009-2013 Datera, Inc.
  *
  * Nicholas A. Bellinger <nab@kernel.org>
  *
  ******************************************************************************/

 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <scsi/scsi_proto.h>

 #include <target/target_core_base.h>
 #include <target/target_core_fabric.h>

 #include "target_core_internal.h"
 #include "target_core_alua.h"
 #include "target_core_pr.h"
 #include "target_core_ua.h"

 sense_reason_t
 target_scsi3_ua_check(struct se_cmd *cmd)
 {
 	struct se_dev_entry *deve;
 	struct se_session *sess = cmd->se_sess;
 	struct se_node_acl *nacl;

 	if (!sess)
 		return 0;

 	nacl = sess->se_node_acl;
 	if (!nacl)
 		return 0;

 	rcu_read_lock();
 	deve = target_nacl_find_deve(nacl, cmd->orig_fe_lun);
 	if (!deve) {
 		rcu_read_unlock();
 		return 0;
 	}
 	if (list_empty_careful(&deve->ua_list)) {
 		rcu_read_unlock();
 		return 0;
 	}
 	rcu_read_unlock();
 	/*
 	 * From sam4r14, section 5.14 Unit attention condition:
 	 *
 	 * a) if an INQUIRY command enters the enabled command state, the
 	 *    device server shall process the INQUIRY command and shall neither
 	 *    report nor clear any unit attention condition;
 	 * b) if a REPORT LUNS command enters the enabled command state, the
 	 *    device server shall process the REPORT LUNS command and shall not
 	 *    report any unit attention condition;
 	 * e) if a REQUEST SENSE command enters the enabled command state while
 	 *    a unit attention condition exists for the SCSI initiator port
 	 *    associated with the I_T nexus on which the REQUEST SENSE command
 	 *    was received, then the device server shall process the command
 	 *    and either:
 	 */
 	switch (cmd->t_task_cdb[0]) {
 	case INQUIRY:
 	case REPORT_LUNS:
 	case REQUEST_SENSE:
 		return 0;
 	default:
 		return TCM_CHECK_CONDITION_UNIT_ATTENTION;
 	}
 }

 int core_scsi3_ua_allocate(
 	struct se_dev_entry *deve,
 	u8 asc,
 	u8 ascq)
 {
 	struct se_ua *ua, *ua_p, *ua_tmp;

 	ua = kmem_cache_zalloc(se_ua_cache, GFP_ATOMIC);
 	if (!ua) {
 		pr_err("Unable to allocate struct se_ua\n");
 		return -ENOMEM;
 	}
 	INIT_LIST_HEAD(&ua->ua_nacl_list);

 	ua->ua_asc = asc;
 	ua->ua_ascq = ascq;

 	spin_lock(&deve->ua_lock);
 	list_for_each_entry_safe(ua_p, ua_tmp, &deve->ua_list, ua_nacl_list) {
 		/*
 		 * Do not report the same UNIT ATTENTION twice..
 		 */
 		if ((ua_p->ua_asc == asc) && (ua_p->ua_ascq == ascq)) {
 			spin_unlock(&deve->ua_lock);
 			kmem_cache_free(se_ua_cache, ua);
 			return 0;
 		}
 		/*
 		 * Attach the highest priority Unit Attention to
 		 * the head of the list following sam4r14,
 		 * Section 5.14 Unit Attention Condition:
 		 *
 		 * POWER ON, RESET, OR BUS DEVICE RESET OCCURRED highest
 		 * POWER ON OCCURRED or
 		 * DEVICE INTERNAL RESET
 		 * SCSI BUS RESET OCCURRED or
 		 * MICROCODE HAS BEEN CHANGED or
 		 * protocol specific
 		 * BUS DEVICE RESET FUNCTION OCCURRED
 		 * I_T NEXUS LOSS OCCURRED
 		 * COMMANDS CLEARED BY POWER LOSS NOTIFICATION
 		 * all others                                    Lowest
 		 *
 		 * Each of the ASCQ codes listed above are defined in
 		 * the 29h ASC family, see spc4r17 Table D.1
 		 */
 		if (ua_p->ua_asc == 0x29) {
 			if ((asc == 0x29) && (ascq > ua_p->ua_ascq))
 				list_add(&ua->ua_nacl_list,
 						&deve->ua_list);
 			else
 				list_add_tail(&ua->ua_nacl_list,
 						&deve->ua_list);
 		} else if (ua_p->ua_asc == 0x2a) {
 			/*
 			 * Incoming Family 29h ASCQ codes will override
 			 * Family 2AHh ASCQ codes for Unit Attention condition.
 			 */
 			if ((asc == 0x29) || (ascq > ua_p->ua_asc))
 				list_add(&ua->ua_nacl_list,
 					&deve->ua_list);
 			else
 				list_add_tail(&ua->ua_nacl_list,
 						&deve->ua_list);
 		} else
 			list_add_tail(&ua->ua_nacl_list,
 				&deve->ua_list);
 		spin_unlock(&deve->ua_lock);

 		return 0;
 	}
 	list_add_tail(&ua->ua_nacl_list, &deve->ua_list);
 	spin_unlock(&deve->ua_lock);

 	pr_debug("Allocated UNIT ATTENTION, mapped LUN: %llu, ASC:"
 		" 0x%02x, ASCQ: 0x%02x\n", deve->mapped_lun,
 		asc, ascq);

 	return 0;
 }

 void target_ua_allocate_lun(struct se_node_acl *nacl,
 			    u32 unpacked_lun, u8 asc, u8 ascq)
 {
 	struct se_dev_entry *deve;

 	if (!nacl)
 		return;

 	rcu_read_lock();
 	deve = target_nacl_find_deve(nacl, unpacked_lun);
 	if (!deve) {
 		rcu_read_unlock();
 		return;
 	}

 	core_scsi3_ua_allocate(deve, asc, ascq);
 	rcu_read_unlock();
 }

 void core_scsi3_ua_release_all(
 	struct se_dev_entry *deve)
 {
 	struct se_ua *ua, *ua_p;

 	spin_lock(&deve->ua_lock);
 	list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) {
 		list_del(&ua->ua_nacl_list);
 		kmem_cache_free(se_ua_cache, ua);
 	}
 	spin_unlock(&deve->ua_lock);
 }

 /*
  * Dequeue a unit attention from the unit attention list. This function
  * returns true if the dequeuing succeeded and if *@key, *@asc and *@ascq have
  * been set.
  */
 bool core_scsi3_ua_for_check_condition(struct se_cmd *cmd, u8 *key, u8 *asc,
 				       u8 *ascq)
 {
 	struct se_device *dev = cmd->se_dev;
 	struct se_dev_entry *deve;
 	struct se_session *sess = cmd->se_sess;
 	struct se_node_acl *nacl;
 	struct se_ua *ua = NULL, *ua_p;
 	int head = 1;
 	bool dev_ua_intlck_clear = (dev->dev_attrib.emulate_ua_intlck_ctrl
 						== TARGET_UA_INTLCK_CTRL_CLEAR);

 	if (WARN_ON_ONCE(!sess))
 		return false;

 	nacl = sess->se_node_acl;
 	if (WARN_ON_ONCE(!nacl))
 		return false;

 	rcu_read_lock();
 	deve = target_nacl_find_deve(nacl, cmd->orig_fe_lun);
 	if (!deve) {
 		rcu_read_unlock();
 		*key = ILLEGAL_REQUEST;
 		*asc = 0x25; /* LOGICAL UNIT NOT SUPPORTED */
 		*ascq = 0;
 		return true;
 	}
 	*key = UNIT_ATTENTION;
 	/*
 	 * The highest priority Unit Attentions are placed at the head of the
 	 * struct se_dev_entry->ua_list, and will be returned in CHECK_CONDITION +
 	 * sense data for the received CDB.
 	 */
 	spin_lock(&deve->ua_lock);
 	list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) {
 		/*
 		 * For ua_intlck_ctrl code not equal to 00b, only report the
 		 * highest priority UNIT_ATTENTION and ASC/ASCQ without
 		 * clearing it.
 		 */
 		if (!dev_ua_intlck_clear) {
 			*asc = ua->ua_asc;
 			*ascq = ua->ua_ascq;
 			break;
 		}
 		/*
 		 * Otherwise for the default 00b, release the UNIT ATTENTION
 		 * condition.  Return the ASC/ASCQ of the highest priority UA
 		 * (head of the list) in the outgoing CHECK_CONDITION + sense.
 		 */
 		if (head) {
 			*asc = ua->ua_asc;
 			*ascq = ua->ua_ascq;
 			head = 0;
 		}
 		list_del(&ua->ua_nacl_list);
 		kmem_cache_free(se_ua_cache, ua);
 	}
 	spin_unlock(&deve->ua_lock);
 	rcu_read_unlock();

 	pr_debug("[%s]: %s UNIT ATTENTION condition with"
 		" INTLCK_CTRL: %d, mapped LUN: %llu, got CDB: 0x%02x"
 		" reported ASC: 0x%02x, ASCQ: 0x%02x\n",
 		nacl->se_tpg->se_tpg_tfo->fabric_name,
 		dev_ua_intlck_clear ? "Releasing" : "Reporting",
 		dev->dev_attrib.emulate_ua_intlck_ctrl,
 		cmd->orig_fe_lun, cmd->t_task_cdb[0], *asc, *ascq);

 	return head == 0;
 }

 int core_scsi3_ua_clear_for_request_sense(
 	struct se_cmd *cmd,
 	u8 *asc,
 	u8 *ascq)
 {
 	struct se_dev_entry *deve;
 	struct se_session *sess = cmd->se_sess;
 	struct se_node_acl *nacl;
 	struct se_ua *ua = NULL, *ua_p;
 	int head = 1;

 	if (!sess)
 		return -EINVAL;

 	nacl = sess->se_node_acl;
 	if (!nacl)
 		return -EINVAL;

 	rcu_read_lock();
 	deve = target_nacl_find_deve(nacl, cmd->orig_fe_lun);
 	if (!deve) {
 		rcu_read_unlock();
 		return -EINVAL;
 	}
 	if (list_empty_careful(&deve->ua_list)) {
 		rcu_read_unlock();
 		return -EPERM;
 	}
 	/*
 	 * The highest priority Unit Attentions are placed at the head of the
 	 * struct se_dev_entry->ua_list.  The First (and hence highest priority)
 	 * ASC/ASCQ will be returned in REQUEST_SENSE payload data for the
 	 * matching struct se_lun.
 	 *
 	 * Once the returning ASC/ASCQ values are set, we go ahead and
 	 * release all of the Unit Attention conditions for the associated
 	 * struct se_lun.
 	 */
 	spin_lock(&deve->ua_lock);
 	list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) {
 		if (head) {
 			*asc = ua->ua_asc;
 			*ascq = ua->ua_ascq;
 			head = 0;
 		}
 		list_del(&ua->ua_nacl_list);
 		kmem_cache_free(se_ua_cache, ua);
 	}
 	spin_unlock(&deve->ua_lock);
 	rcu_read_unlock();

 	pr_debug("[%s]: Released UNIT ATTENTION condition, mapped"
 		" LUN: %llu, got REQUEST_SENSE reported ASC: 0x%02x,"
 		" ASCQ: 0x%02x\n", nacl->se_tpg->se_tpg_tfo->fabric_name,
 		cmd->orig_fe_lun, *asc, *ascq);

 	return (head) ? -EPERM : 0;
 }
	// SPDX-License-Identifier: GPL-2.0-or-later
	/*******************************************************************************
	* Filename: target_core_ua.c
	*
	* This file contains logic for SPC-3 Unit Attention emulation
	*
	* (c) Copyright 2009-2013 Datera, Inc.
	*
	* Nicholas A. Bellinger <nab@kernel.org>
	*
	******************************************************************************/

	#include <linux/slab.h>
	#include <linux/spinlock.h>
	#include <scsi/scsi_proto.h>

	#include <target/target_core_base.h>
	#include <target/target_core_fabric.h>

	#include "target_core_internal.h"
	#include "target_core_alua.h"
	#include "target_core_pr.h"
	#include "target_core_ua.h"

	sense_reason_t
	target_scsi3_ua_check(struct se_cmd *cmd)
	{
	struct se_dev_entry *deve;
	struct se_session *sess = cmd->se_sess;
	struct se_node_acl *nacl;

	if (!sess)
	return 0;

	nacl = sess->se_node_acl;
	if (!nacl)
	return 0;

	rcu_read_lock();
	deve = target_nacl_find_deve(nacl, cmd->orig_fe_lun);
	if (!deve) {
	rcu_read_unlock();
	return 0;
	}
	if (list_empty_careful(&deve->ua_list)) {
	rcu_read_unlock();
	return 0;
	}
	rcu_read_unlock();
	/*
	* From sam4r14, section 5.14 Unit attention condition:
	*
	* a) if an INQUIRY command enters the enabled command state, the
	* device server shall process the INQUIRY command and shall neither
	* report nor clear any unit attention condition;
	* b) if a REPORT LUNS command enters the enabled command state, the
	* device server shall process the REPORT LUNS command and shall not
	* report any unit attention condition;
	* e) if a REQUEST SENSE command enters the enabled command state while
	* a unit attention condition exists for the SCSI initiator port
	* associated with the I_T nexus on which the REQUEST SENSE command
	* was received, then the device server shall process the command
	* and either:
	*/
	switch (cmd->t_task_cdb[0]) {
	case INQUIRY:
	case REPORT_LUNS:
	case REQUEST_SENSE:
	return 0;
	default:
	return TCM_CHECK_CONDITION_UNIT_ATTENTION;
	}
	}

	int core_scsi3_ua_allocate(
	struct se_dev_entry *deve,
	u8 asc,
	u8 ascq)
	{
	struct se_ua ua, ua_p, *ua_tmp;

	ua = kmem_cache_zalloc(se_ua_cache, GFP_ATOMIC);
	if (!ua) {
	pr_err("Unable to allocate struct se_ua\n");
	return -ENOMEM;
	}
	INIT_LIST_HEAD(&ua->ua_nacl_list);

	ua->ua_asc = asc;
	ua->ua_ascq = ascq;

	spin_lock(&deve->ua_lock);
	list_for_each_entry_safe(ua_p, ua_tmp, &deve->ua_list, ua_nacl_list) {
	/*
	* Do not report the same UNIT ATTENTION twice..
	*/
	if ((ua_p->ua_asc == asc) && (ua_p->ua_ascq == ascq)) {
	spin_unlock(&deve->ua_lock);
	kmem_cache_free(se_ua_cache, ua);
	return 0;
	}
	/*
	* Attach the highest priority Unit Attention to
	* the head of the list following sam4r14,
	* Section 5.14 Unit Attention Condition:
	*
	* POWER ON, RESET, OR BUS DEVICE RESET OCCURRED highest
	* POWER ON OCCURRED or
	* DEVICE INTERNAL RESET
	* SCSI BUS RESET OCCURRED or
	* MICROCODE HAS BEEN CHANGED or
	* protocol specific
	* BUS DEVICE RESET FUNCTION OCCURRED
	* I_T NEXUS LOSS OCCURRED
	* COMMANDS CLEARED BY POWER LOSS NOTIFICATION
	* all others Lowest
	*
	* Each of the ASCQ codes listed above are defined in
	* the 29h ASC family, see spc4r17 Table D.1
	*/
	if (ua_p->ua_asc == 0x29) {
	if ((asc == 0x29) && (ascq > ua_p->ua_ascq))
	list_add(&ua->ua_nacl_list,
	&deve->ua_list);
	else
	list_add_tail(&ua->ua_nacl_list,
	&deve->ua_list);
	} else if (ua_p->ua_asc == 0x2a) {
	/*
	* Incoming Family 29h ASCQ codes will override
	* Family 2AHh ASCQ codes for Unit Attention condition.
	*/
	if ((asc == 0x29) \|\| (ascq > ua_p->ua_asc))
	list_add(&ua->ua_nacl_list,
	&deve->ua_list);
	else
	list_add_tail(&ua->ua_nacl_list,
	&deve->ua_list);
	} else
	list_add_tail(&ua->ua_nacl_list,
	&deve->ua_list);
	spin_unlock(&deve->ua_lock);

	return 0;
	}
	list_add_tail(&ua->ua_nacl_list, &deve->ua_list);
	spin_unlock(&deve->ua_lock);

	pr_debug("Allocated UNIT ATTENTION, mapped LUN: %llu, ASC:"
	" 0x%02x, ASCQ: 0x%02x\n", deve->mapped_lun,
	asc, ascq);

	return 0;
	}

	void target_ua_allocate_lun(struct se_node_acl *nacl,
	u32 unpacked_lun, u8 asc, u8 ascq)
	{
	struct se_dev_entry *deve;

	if (!nacl)
	return;

	rcu_read_lock();
	deve = target_nacl_find_deve(nacl, unpacked_lun);
	if (!deve) {
	rcu_read_unlock();
	return;
	}

	core_scsi3_ua_allocate(deve, asc, ascq);
	rcu_read_unlock();
	}

	void core_scsi3_ua_release_all(
	struct se_dev_entry *deve)
	{
	struct se_ua ua, ua_p;

	spin_lock(&deve->ua_lock);
	list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) {
	list_del(&ua->ua_nacl_list);
	kmem_cache_free(se_ua_cache, ua);
	}
	spin_unlock(&deve->ua_lock);
	}

	/*
	* Dequeue a unit attention from the unit attention list. This function
	* returns true if the dequeuing succeeded and if @key, @asc and *@ascq have
	* been set.
	*/
	bool core_scsi3_ua_for_check_condition(struct se_cmd cmd, u8 key, u8 *asc,
	u8 *ascq)
	{
	struct se_device *dev = cmd->se_dev;
	struct se_dev_entry *deve;
	struct se_session *sess = cmd->se_sess;
	struct se_node_acl *nacl;
	struct se_ua ua = NULL, ua_p;
	int head = 1;
	bool dev_ua_intlck_clear = (dev->dev_attrib.emulate_ua_intlck_ctrl
	== TARGET_UA_INTLCK_CTRL_CLEAR);

	if (WARN_ON_ONCE(!sess))
	return false;

	nacl = sess->se_node_acl;
	if (WARN_ON_ONCE(!nacl))
	return false;

	rcu_read_lock();
	deve = target_nacl_find_deve(nacl, cmd->orig_fe_lun);
	if (!deve) {
	rcu_read_unlock();
	*key = ILLEGAL_REQUEST;
	asc = 0x25; / LOGICAL UNIT NOT SUPPORTED */
	*ascq = 0;
	return true;
	}
	*key = UNIT_ATTENTION;
	/*
	* The highest priority Unit Attentions are placed at the head of the
	* struct se_dev_entry->ua_list, and will be returned in CHECK_CONDITION +
	* sense data for the received CDB.
	*/
	spin_lock(&deve->ua_lock);
	list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) {
	/*
	* For ua_intlck_ctrl code not equal to 00b, only report the
	* highest priority UNIT_ATTENTION and ASC/ASCQ without
	* clearing it.
	*/
	if (!dev_ua_intlck_clear) {
	*asc = ua->ua_asc;
	*ascq = ua->ua_ascq;
	break;
	}
	/*
	* Otherwise for the default 00b, release the UNIT ATTENTION
	* condition. Return the ASC/ASCQ of the highest priority UA
	* (head of the list) in the outgoing CHECK_CONDITION + sense.
	*/
	if (head) {
	*asc = ua->ua_asc;
	*ascq = ua->ua_ascq;
	head = 0;
	}
	list_del(&ua->ua_nacl_list);
	kmem_cache_free(se_ua_cache, ua);
	}
	spin_unlock(&deve->ua_lock);
	rcu_read_unlock();

	pr_debug("[%s]: %s UNIT ATTENTION condition with"
	" INTLCK_CTRL: %d, mapped LUN: %llu, got CDB: 0x%02x"
	" reported ASC: 0x%02x, ASCQ: 0x%02x\n",
	nacl->se_tpg->se_tpg_tfo->fabric_name,
	dev_ua_intlck_clear ? "Releasing" : "Reporting",
	dev->dev_attrib.emulate_ua_intlck_ctrl,
	cmd->orig_fe_lun, cmd->t_task_cdb[0], asc, ascq);

	return head == 0;
	}

	int core_scsi3_ua_clear_for_request_sense(
	struct se_cmd *cmd,
	u8 *asc,
	u8 *ascq)
	{
	struct se_dev_entry *deve;
	struct se_session *sess = cmd->se_sess;
	struct se_node_acl *nacl;
	struct se_ua ua = NULL, ua_p;
	int head = 1;

	if (!sess)
	return -EINVAL;

	nacl = sess->se_node_acl;
	if (!nacl)
	return -EINVAL;

	rcu_read_lock();
	deve = target_nacl_find_deve(nacl, cmd->orig_fe_lun);
	if (!deve) {
	rcu_read_unlock();
	return -EINVAL;
	}
	if (list_empty_careful(&deve->ua_list)) {
	rcu_read_unlock();
	return -EPERM;
	}
	/*
	* The highest priority Unit Attentions are placed at the head of the
	* struct se_dev_entry->ua_list. The First (and hence highest priority)
	* ASC/ASCQ will be returned in REQUEST_SENSE payload data for the
	* matching struct se_lun.
	*
	* Once the returning ASC/ASCQ values are set, we go ahead and
	* release all of the Unit Attention conditions for the associated
	* struct se_lun.
	*/
	spin_lock(&deve->ua_lock);
	list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) {
	if (head) {
	*asc = ua->ua_asc;
	*ascq = ua->ua_ascq;
	head = 0;
	}
	list_del(&ua->ua_nacl_list);
	kmem_cache_free(se_ua_cache, ua);
	}
	spin_unlock(&deve->ua_lock);
	rcu_read_unlock();

	pr_debug("[%s]: Released UNIT ATTENTION condition, mapped"
	" LUN: %llu, got REQUEST_SENSE reported ASC: 0x%02x,"
	" ASCQ: 0x%02x\n", nacl->se_tpg->se_tpg_tfo->fabric_name,
	cmd->orig_fe_lun, asc, ascq);

	return (head) ? -EPERM : 0;
	}