| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * IB700 Single Board Computer WDT driver |
| * |
| * (c) Copyright 2001 Charles Howes <chowes@vsol.net> |
| * |
| * Based on advantechwdt.c which is based on acquirewdt.c which |
| * is based on wdt.c. |
| * |
| * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl> |
| * |
| * Based on acquirewdt.c which is based on wdt.c. |
| * Original copyright messages: |
| * |
| * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, |
| * All Rights Reserved. |
| * |
| * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide |
| * warranty for any of this software. This material is provided |
| * "AS-IS" and at no charge. |
| * |
| * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> |
| * |
| * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> |
| * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT |
| * Added timeout module option to override default |
| * |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/miscdevice.h> |
| #include <linux/watchdog.h> |
| #include <linux/ioport.h> |
| #include <linux/fs.h> |
| #include <linux/init.h> |
| #include <linux/spinlock.h> |
| #include <linux/moduleparam.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/uaccess.h> |
| |
| |
| static struct platform_device *ibwdt_platform_device; |
| static unsigned long ibwdt_is_open; |
| static DEFINE_SPINLOCK(ibwdt_lock); |
| static char expect_close; |
| |
| /* Module information */ |
| #define DRV_NAME "ib700wdt" |
| |
| /* |
| * |
| * Watchdog Timer Configuration |
| * |
| * The function of the watchdog timer is to reset the system |
| * automatically and is defined at I/O port 0443H. To enable the |
| * watchdog timer and allow the system to reset, write I/O port 0443H. |
| * To disable the timer, write I/O port 0441H for the system to stop the |
| * watchdog function. The timer has a tolerance of 20% for its |
| * intervals. |
| * |
| * The following describes how the timer should be programmed. |
| * |
| * Enabling Watchdog: |
| * MOV AX,000FH (Choose the values from 0 to F) |
| * MOV DX,0443H |
| * OUT DX,AX |
| * |
| * Disabling Watchdog: |
| * MOV AX,000FH (Any value is fine.) |
| * MOV DX,0441H |
| * OUT DX,AX |
| * |
| * Watchdog timer control table: |
| * Level Value Time/sec | Level Value Time/sec |
| * 1 F 0 | 9 7 16 |
| * 2 E 2 | 10 6 18 |
| * 3 D 4 | 11 5 20 |
| * 4 C 6 | 12 4 22 |
| * 5 B 8 | 13 3 24 |
| * 6 A 10 | 14 2 26 |
| * 7 9 12 | 15 1 28 |
| * 8 8 14 | 16 0 30 |
| * |
| */ |
| |
| #define WDT_STOP 0x441 |
| #define WDT_START 0x443 |
| |
| /* Default timeout */ |
| #define WATCHDOG_TIMEOUT 30 /* 30 seconds +/- 20% */ |
| static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ |
| module_param(timeout, int, 0); |
| MODULE_PARM_DESC(timeout, |
| "Watchdog timeout in seconds. 0<= timeout <=30, default=" |
| __MODULE_STRING(WATCHDOG_TIMEOUT) "."); |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, |
| "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| |
| /* |
| * Watchdog Operations |
| */ |
| |
| static void ibwdt_ping(void) |
| { |
| int wd_margin = 15 - ((timeout + 1) / 2); |
| |
| spin_lock(&ibwdt_lock); |
| |
| /* Write a watchdog value */ |
| outb_p(wd_margin, WDT_START); |
| |
| spin_unlock(&ibwdt_lock); |
| } |
| |
| static void ibwdt_disable(void) |
| { |
| spin_lock(&ibwdt_lock); |
| outb_p(0, WDT_STOP); |
| spin_unlock(&ibwdt_lock); |
| } |
| |
| static int ibwdt_set_heartbeat(int t) |
| { |
| if (t < 0 || t > 30) |
| return -EINVAL; |
| |
| timeout = t; |
| return 0; |
| } |
| |
| /* |
| * /dev/watchdog handling |
| */ |
| |
| static ssize_t ibwdt_write(struct file *file, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| if (count) { |
| if (!nowayout) { |
| size_t i; |
| |
| /* In case it was set long ago */ |
| expect_close = 0; |
| |
| for (i = 0; i != count; i++) { |
| char c; |
| if (get_user(c, buf + i)) |
| return -EFAULT; |
| if (c == 'V') |
| expect_close = 42; |
| } |
| } |
| ibwdt_ping(); |
| } |
| return count; |
| } |
| |
| static long ibwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| int new_margin; |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| |
| static const struct watchdog_info ident = { |
| .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
| | WDIOF_MAGICCLOSE, |
| .firmware_version = 1, |
| .identity = "IB700 WDT", |
| }; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| if (copy_to_user(argp, &ident, sizeof(ident))) |
| return -EFAULT; |
| break; |
| |
| case WDIOC_GETSTATUS: |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(0, p); |
| |
| case WDIOC_SETOPTIONS: |
| { |
| int options, retval = -EINVAL; |
| |
| if (get_user(options, p)) |
| return -EFAULT; |
| |
| if (options & WDIOS_DISABLECARD) { |
| ibwdt_disable(); |
| retval = 0; |
| } |
| if (options & WDIOS_ENABLECARD) { |
| ibwdt_ping(); |
| retval = 0; |
| } |
| return retval; |
| } |
| case WDIOC_KEEPALIVE: |
| ibwdt_ping(); |
| break; |
| |
| case WDIOC_SETTIMEOUT: |
| if (get_user(new_margin, p)) |
| return -EFAULT; |
| if (ibwdt_set_heartbeat(new_margin)) |
| return -EINVAL; |
| ibwdt_ping(); |
| fallthrough; |
| |
| case WDIOC_GETTIMEOUT: |
| return put_user(timeout, p); |
| |
| default: |
| return -ENOTTY; |
| } |
| return 0; |
| } |
| |
| static int ibwdt_open(struct inode *inode, struct file *file) |
| { |
| if (test_and_set_bit(0, &ibwdt_is_open)) |
| return -EBUSY; |
| if (nowayout) |
| __module_get(THIS_MODULE); |
| |
| /* Activate */ |
| ibwdt_ping(); |
| return stream_open(inode, file); |
| } |
| |
| static int ibwdt_close(struct inode *inode, struct file *file) |
| { |
| if (expect_close == 42) { |
| ibwdt_disable(); |
| } else { |
| pr_crit("WDT device closed unexpectedly. WDT will not stop!\n"); |
| ibwdt_ping(); |
| } |
| clear_bit(0, &ibwdt_is_open); |
| expect_close = 0; |
| return 0; |
| } |
| |
| /* |
| * Kernel Interfaces |
| */ |
| |
| static const struct file_operations ibwdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = ibwdt_write, |
| .unlocked_ioctl = ibwdt_ioctl, |
| .compat_ioctl = compat_ptr_ioctl, |
| .open = ibwdt_open, |
| .release = ibwdt_close, |
| }; |
| |
| static struct miscdevice ibwdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &ibwdt_fops, |
| }; |
| |
| /* |
| * Init & exit routines |
| */ |
| |
| static int __init ibwdt_probe(struct platform_device *dev) |
| { |
| int res; |
| |
| #if WDT_START != WDT_STOP |
| if (!request_region(WDT_STOP, 1, "IB700 WDT")) { |
| pr_err("STOP method I/O %X is not available\n", WDT_STOP); |
| res = -EIO; |
| goto out_nostopreg; |
| } |
| #endif |
| |
| if (!request_region(WDT_START, 1, "IB700 WDT")) { |
| pr_err("START method I/O %X is not available\n", WDT_START); |
| res = -EIO; |
| goto out_nostartreg; |
| } |
| |
| /* Check that the heartbeat value is within it's range ; |
| * if not reset to the default */ |
| if (ibwdt_set_heartbeat(timeout)) { |
| ibwdt_set_heartbeat(WATCHDOG_TIMEOUT); |
| pr_info("timeout value must be 0<=x<=30, using %d\n", timeout); |
| } |
| |
| res = misc_register(&ibwdt_miscdev); |
| if (res) { |
| pr_err("failed to register misc device\n"); |
| goto out_nomisc; |
| } |
| return 0; |
| |
| out_nomisc: |
| release_region(WDT_START, 1); |
| out_nostartreg: |
| #if WDT_START != WDT_STOP |
| release_region(WDT_STOP, 1); |
| #endif |
| out_nostopreg: |
| return res; |
| } |
| |
| static void ibwdt_remove(struct platform_device *dev) |
| { |
| misc_deregister(&ibwdt_miscdev); |
| release_region(WDT_START, 1); |
| #if WDT_START != WDT_STOP |
| release_region(WDT_STOP, 1); |
| #endif |
| } |
| |
| static void ibwdt_shutdown(struct platform_device *dev) |
| { |
| /* Turn the WDT off if we have a soft shutdown */ |
| ibwdt_disable(); |
| } |
| |
| static struct platform_driver ibwdt_driver = { |
| .remove_new = ibwdt_remove, |
| .shutdown = ibwdt_shutdown, |
| .driver = { |
| .name = DRV_NAME, |
| }, |
| }; |
| |
| static int __init ibwdt_init(void) |
| { |
| int err; |
| |
| pr_info("WDT driver for IB700 single board computer initialising\n"); |
| |
| ibwdt_platform_device = platform_device_register_simple(DRV_NAME, |
| -1, NULL, 0); |
| if (IS_ERR(ibwdt_platform_device)) |
| return PTR_ERR(ibwdt_platform_device); |
| |
| err = platform_driver_probe(&ibwdt_driver, ibwdt_probe); |
| if (err) |
| goto unreg_platform_device; |
| |
| return 0; |
| |
| unreg_platform_device: |
| platform_device_unregister(ibwdt_platform_device); |
| return err; |
| } |
| |
| static void __exit ibwdt_exit(void) |
| { |
| platform_device_unregister(ibwdt_platform_device); |
| platform_driver_unregister(&ibwdt_driver); |
| pr_info("Watchdog Module Unloaded\n"); |
| } |
| |
| module_init(ibwdt_init); |
| module_exit(ibwdt_exit); |
| |
| MODULE_AUTHOR("Charles Howes <chowes@vsol.net>"); |
| MODULE_DESCRIPTION("IB700 SBC watchdog driver"); |
| MODULE_LICENSE("GPL"); |
| |
| /* end of ib700wdt.c */ |