| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer |
| * |
| * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> |
| * Copyright (C) 2013 John Crispin <john@phrozen.org> |
| * |
| * This driver was based on: drivers/watchdog/softdog.c |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/reset.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/watchdog.h> |
| #include <linux/moduleparam.h> |
| #include <linux/platform_device.h> |
| #include <linux/mod_devicetable.h> |
| |
| #include <asm/mach-ralink/ralink_regs.h> |
| |
| #define SYSC_RSTSTAT 0x38 |
| #define WDT_RST_CAUSE BIT(1) |
| |
| #define RALINK_WDT_TIMEOUT 30 |
| #define RALINK_WDT_PRESCALE 65536 |
| |
| #define TIMER_REG_TMR1LOAD 0x00 |
| #define TIMER_REG_TMR1CTL 0x08 |
| |
| #define TMRSTAT_TMR1RST BIT(5) |
| |
| #define TMR1CTL_ENABLE BIT(7) |
| #define TMR1CTL_MODE_SHIFT 4 |
| #define TMR1CTL_MODE_MASK 0x3 |
| #define TMR1CTL_MODE_FREE_RUNNING 0x0 |
| #define TMR1CTL_MODE_PERIODIC 0x1 |
| #define TMR1CTL_MODE_TIMEOUT 0x2 |
| #define TMR1CTL_MODE_WDT 0x3 |
| #define TMR1CTL_PRESCALE_MASK 0xf |
| #define TMR1CTL_PRESCALE_65536 0xf |
| |
| struct rt2880_wdt_data { |
| void __iomem *base; |
| unsigned long freq; |
| struct clk *clk; |
| struct reset_control *rst; |
| struct watchdog_device wdt; |
| }; |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, |
| "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| static inline void rt_wdt_w32(void __iomem *base, unsigned int reg, u32 val) |
| { |
| iowrite32(val, base + reg); |
| } |
| |
| static inline u32 rt_wdt_r32(void __iomem *base, unsigned int reg) |
| { |
| return ioread32(base + reg); |
| } |
| |
| static int rt288x_wdt_ping(struct watchdog_device *w) |
| { |
| struct rt2880_wdt_data *drvdata = watchdog_get_drvdata(w); |
| |
| rt_wdt_w32(drvdata->base, TIMER_REG_TMR1LOAD, w->timeout * drvdata->freq); |
| |
| return 0; |
| } |
| |
| static int rt288x_wdt_start(struct watchdog_device *w) |
| { |
| struct rt2880_wdt_data *drvdata = watchdog_get_drvdata(w); |
| u32 t; |
| |
| t = rt_wdt_r32(drvdata->base, TIMER_REG_TMR1CTL); |
| t &= ~(TMR1CTL_MODE_MASK << TMR1CTL_MODE_SHIFT | |
| TMR1CTL_PRESCALE_MASK); |
| t |= (TMR1CTL_MODE_WDT << TMR1CTL_MODE_SHIFT | |
| TMR1CTL_PRESCALE_65536); |
| rt_wdt_w32(drvdata->base, TIMER_REG_TMR1CTL, t); |
| |
| rt288x_wdt_ping(w); |
| |
| t = rt_wdt_r32(drvdata->base, TIMER_REG_TMR1CTL); |
| t |= TMR1CTL_ENABLE; |
| rt_wdt_w32(drvdata->base, TIMER_REG_TMR1CTL, t); |
| |
| return 0; |
| } |
| |
| static int rt288x_wdt_stop(struct watchdog_device *w) |
| { |
| struct rt2880_wdt_data *drvdata = watchdog_get_drvdata(w); |
| u32 t; |
| |
| rt288x_wdt_ping(w); |
| |
| t = rt_wdt_r32(drvdata->base, TIMER_REG_TMR1CTL); |
| t &= ~TMR1CTL_ENABLE; |
| rt_wdt_w32(drvdata->base, TIMER_REG_TMR1CTL, t); |
| |
| return 0; |
| } |
| |
| static int rt288x_wdt_set_timeout(struct watchdog_device *w, unsigned int t) |
| { |
| w->timeout = t; |
| rt288x_wdt_ping(w); |
| |
| return 0; |
| } |
| |
| static int rt288x_wdt_bootcause(void) |
| { |
| if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE) |
| return WDIOF_CARDRESET; |
| |
| return 0; |
| } |
| |
| static const struct watchdog_info rt288x_wdt_info = { |
| .identity = "Ralink Watchdog", |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, |
| }; |
| |
| static const struct watchdog_ops rt288x_wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = rt288x_wdt_start, |
| .stop = rt288x_wdt_stop, |
| .ping = rt288x_wdt_ping, |
| .set_timeout = rt288x_wdt_set_timeout, |
| }; |
| |
| static int rt288x_wdt_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct watchdog_device *wdt; |
| struct rt2880_wdt_data *drvdata; |
| int ret; |
| |
| drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); |
| if (!drvdata) |
| return -ENOMEM; |
| |
| drvdata->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(drvdata->base)) |
| return PTR_ERR(drvdata->base); |
| |
| drvdata->clk = devm_clk_get(dev, NULL); |
| if (IS_ERR(drvdata->clk)) |
| return PTR_ERR(drvdata->clk); |
| |
| drvdata->rst = devm_reset_control_get_exclusive(dev, NULL); |
| if (!IS_ERR(drvdata->rst)) |
| reset_control_deassert(drvdata->rst); |
| |
| drvdata->freq = clk_get_rate(drvdata->clk) / RALINK_WDT_PRESCALE; |
| |
| wdt = &drvdata->wdt; |
| wdt->info = &rt288x_wdt_info; |
| wdt->ops = &rt288x_wdt_ops; |
| wdt->min_timeout = 1; |
| wdt->max_timeout = (0xfffful / drvdata->freq); |
| wdt->parent = dev; |
| wdt->bootstatus = rt288x_wdt_bootcause(); |
| |
| watchdog_init_timeout(wdt, wdt->max_timeout, dev); |
| watchdog_set_nowayout(wdt, nowayout); |
| watchdog_set_drvdata(wdt, drvdata); |
| |
| watchdog_stop_on_reboot(wdt); |
| ret = devm_watchdog_register_device(dev, &drvdata->wdt); |
| if (!ret) |
| dev_info(dev, "Initialized\n"); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id rt288x_wdt_match[] = { |
| { .compatible = "ralink,rt2880-wdt" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, rt288x_wdt_match); |
| |
| static struct platform_driver rt288x_wdt_driver = { |
| .probe = rt288x_wdt_probe, |
| .driver = { |
| .name = KBUILD_MODNAME, |
| .of_match_table = rt288x_wdt_match, |
| }, |
| }; |
| |
| module_platform_driver(rt288x_wdt_driver); |
| |
| MODULE_DESCRIPTION("MediaTek/Ralink RT288x/RT3xxx hardware watchdog driver"); |
| MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org"); |
| MODULE_LICENSE("GPL v2"); |