| /* |
| * arch/ppc/platforms/4xx/redwood5.c |
| * |
| * Support for the IBM redwood5 eval board file |
| * |
| * Author: Armin Kuster <akuster@mvista.com> |
| * |
| * 2000-2001 (c) MontaVista, Software, Inc. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/init.h> |
| #include <linux/pagemap.h> |
| #include <linux/device.h> |
| #include <linux/ioport.h> |
| #include <asm/io.h> |
| #include <asm/machdep.h> |
| #include <asm/ppc4xx_pic.h> |
| |
| /* |
| * Define external IRQ senses and polarities. |
| */ |
| unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = { |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 0 */ |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 1 */ |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 2 */ |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 3 */ |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 4 */ |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 5 */ |
| }; |
| |
| static struct resource smc91x_resources[] = { |
| [0] = { |
| .start = SMC91111_BASE_ADDR, |
| .end = SMC91111_BASE_ADDR + SMC91111_REG_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = SMC91111_IRQ, |
| .end = SMC91111_IRQ, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device smc91x_device = { |
| .name = "smc91x", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(smc91x_resources), |
| .resource = smc91x_resources, |
| }; |
| |
| static struct platform_device *redwood5_devs[] __initdata = { |
| &smc91x_device, |
| }; |
| |
| static int __init |
| redwood5_platform_add_devices(void) |
| { |
| return platform_add_devices(redwood5_devs, ARRAY_SIZE(redwood5_devs)); |
| } |
| |
| void __init |
| redwood5_setup_arch(void) |
| { |
| ppc4xx_setup_arch(); |
| |
| #ifdef CONFIG_DEBUG_BRINGUP |
| printk("\n"); |
| printk("machine\t: %s\n", PPC4xx_MACHINE_NAME); |
| printk("\n"); |
| printk("bi_s_version\t %s\n", bip->bi_s_version); |
| printk("bi_r_version\t %s\n", bip->bi_r_version); |
| printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,bip->bi_memsize/(1024*1000)); |
| printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0, |
| bip->bi_enetaddr[0], bip->bi_enetaddr[1], |
| bip->bi_enetaddr[2], bip->bi_enetaddr[3], |
| bip->bi_enetaddr[4], bip->bi_enetaddr[5]); |
| |
| printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n", |
| bip->bi_intfreq, bip->bi_intfreq/ 1000000); |
| |
| printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n", |
| bip->bi_busfreq, bip->bi_busfreq / 1000000 ); |
| printk("bi_tbfreq\t 0x%8.8x\t TB freq:\t %dMHz\n", |
| bip->bi_tbfreq, bip->bi_tbfreq/1000000); |
| |
| printk("\n"); |
| #endif |
| device_initcall(redwood5_platform_add_devices); |
| } |
| |
| void __init |
| redwood5_map_io(void) |
| { |
| int i; |
| |
| ppc4xx_map_io(); |
| for (i = 0; i < 16; i++) { |
| unsigned long v, p; |
| |
| /* 0x400x0000 -> 0xe00x0000 */ |
| p = 0x40000000 | (i << 16); |
| v = STB04xxx_IO_BASE | (i << 16); |
| |
| io_block_mapping(v, p, PAGE_SIZE, |
| _PAGE_NO_CACHE | pgprot_val(PAGE_KERNEL) | _PAGE_GUARDED); |
| } |
| |
| |
| } |
| |
| void __init |
| platform_init(unsigned long r3, unsigned long r4, unsigned long r5, |
| unsigned long r6, unsigned long r7) |
| { |
| ppc4xx_init(r3, r4, r5, r6, r7); |
| |
| ppc_md.setup_arch = redwood5_setup_arch; |
| ppc_md.setup_io_mappings = redwood5_map_io; |
| } |