| // SPDX-License-Identifier: GPL-2.0 | |
| #include <linux/compiler.h> | |
| #include <linux/context_tracking.h> | |
| #include <linux/errno.h> | |
| #include <linux/nospec.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/randomize_kstack.h> | |
| #include <linux/syscalls.h> | |
| #include <asm/debug-monitors.h> | |
| #include <asm/exception.h> | |
| #include <asm/fpsimd.h> | |
| #include <asm/syscall.h> | |
| #include <asm/thread_info.h> | |
| #include <asm/unistd.h> | |
| #include <asm/unistd_compat_32.h> | |
| long compat_arm_syscall(struct pt_regs *regs, int scno); | |
| long sys_ni_syscall(void); | |
| static long do_ni_syscall(struct pt_regs *regs, int scno) | |
| { | |
| if (is_compat_task()) { | |
| long ret = compat_arm_syscall(regs, scno); | |
| if (ret != -ENOSYS) | |
| return ret; | |
| } | |
| return sys_ni_syscall(); | |
| } | |
| static long __invoke_syscall(struct pt_regs *regs, syscall_fn_t syscall_fn) | |
| { | |
| return syscall_fn(regs); | |
| } | |
| static void invoke_syscall(struct pt_regs *regs, unsigned int scno, | |
| unsigned int sc_nr, | |
| const syscall_fn_t syscall_table[]) | |
| { | |
| long ret; | |
| add_random_kstack_offset(); | |
| if (likely(scno < sc_nr)) { | |
| syscall_fn_t syscall_fn; | |
| syscall_fn = syscall_table[array_index_nospec(scno, sc_nr)]; | |
| ret = __invoke_syscall(regs, syscall_fn); | |
| } else { | |
| ret = do_ni_syscall(regs, scno); | |
| } | |
| syscall_set_return_value(current, regs, 0, ret); | |
| } | |
| static inline bool has_syscall_work(unsigned long flags) | |
| { | |
| return unlikely(flags & _TIF_SYSCALL_WORK); | |
| } | |
| static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, | |
| const syscall_fn_t syscall_table[]) | |
| { | |
| unsigned long flags = read_thread_flags(); | |
| regs->orig_x0 = regs->regs[0]; | |
| regs->syscallno = scno; | |
| /* | |
| * BTI note: | |
| * The architecture does not guarantee that SPSR.BTYPE is zero | |
| * on taking an SVC, so we could return to userspace with a | |
| * non-zero BTYPE after the syscall. | |
| * | |
| * This shouldn't matter except when userspace is explicitly | |
| * doing something stupid, such as setting PROT_BTI on a page | |
| * that lacks conforming BTI/PACIxSP instructions, falling | |
| * through from one executable page to another with differing | |
| * PROT_BTI, or messing with BTYPE via ptrace: in such cases, | |
| * userspace should not be surprised if a SIGILL occurs on | |
| * syscall return. | |
| * | |
| * So, don't touch regs->pstate & PSR_BTYPE_MASK here. | |
| * (Similarly for HVC and SMC elsewhere.) | |
| */ | |
| if (unlikely(flags & _TIF_MTE_ASYNC_FAULT)) { | |
| /* | |
| * Process the asynchronous tag check fault before the actual | |
| * syscall. do_notify_resume() will send a signal to userspace | |
| * before the syscall is restarted. | |
| */ | |
| syscall_set_return_value(current, regs, -ERESTARTNOINTR, 0); | |
| return; | |
| } | |
| if (has_syscall_work(flags)) { | |
| /* | |
| * The de-facto standard way to skip a system call using ptrace | |
| * is to set the system call to -1 (NO_SYSCALL) and set x0 to a | |
| * suitable error code for consumption by userspace. However, | |
| * this cannot be distinguished from a user-issued syscall(-1) | |
| * and so we must set x0 to -ENOSYS here in case the tracer doesn't | |
| * issue the skip and we fall into trace_exit with x0 preserved. | |
| * | |
| * This is slightly odd because it also means that if a tracer | |
| * sets the system call number to -1 but does not initialise x0, | |
| * then x0 will be preserved for all system calls apart from a | |
| * user-issued syscall(-1). However, requesting a skip and not | |
| * setting the return value is unlikely to do anything sensible | |
| * anyway. | |
| */ | |
| if (scno == NO_SYSCALL) | |
| syscall_set_return_value(current, regs, -ENOSYS, 0); | |
| scno = syscall_trace_enter(regs); | |
| if (scno == NO_SYSCALL) | |
| goto trace_exit; | |
| } | |
| invoke_syscall(regs, scno, sc_nr, syscall_table); | |
| /* | |
| * The tracing status may have changed under our feet, so we have to | |
| * check again. However, if we were tracing entry, then we always trace | |
| * exit regardless, as the old entry assembly did. | |
| */ | |
| if (!has_syscall_work(flags) && !IS_ENABLED(CONFIG_DEBUG_RSEQ)) { | |
| flags = read_thread_flags(); | |
| if (!has_syscall_work(flags) && !(flags & _TIF_SINGLESTEP)) | |
| return; | |
| } | |
| trace_exit: | |
| syscall_trace_exit(regs); | |
| } | |
| void do_el0_svc(struct pt_regs *regs) | |
| { | |
| el0_svc_common(regs, regs->regs[8], __NR_syscalls, sys_call_table); | |
| } | |
| #ifdef CONFIG_COMPAT | |
| void do_el0_svc_compat(struct pt_regs *regs) | |
| { | |
| el0_svc_common(regs, regs->regs[7], __NR_compat32_syscalls, | |
| compat_sys_call_table); | |
| } | |
| #endif |