| // SPDX-License-Identifier: GPL-2.0+ | |
| // | |
| // Security related flags and so on. | |
| // | |
| // Copyright 2018, Michael Ellerman, IBM Corporation. | |
| #include <linux/cpu.h> | |
| #include <linux/kernel.h> | |
| #include <linux/device.h> | |
| #include <linux/memblock.h> | |
| #include <linux/nospec.h> | |
| #include <linux/prctl.h> | |
| #include <linux/seq_buf.h> | |
| #include <linux/sysfs.h> | |
| #include <linux/debugfs.h> | |
| #include <asm/asm-prototypes.h> | |
| #include <asm/text-patching.h> | |
| #include <asm/security_features.h> | |
| #include <asm/sections.h> | |
| #include <asm/setup.h> | |
| #include <asm/inst.h> | |
| #include "setup.h" | |
| u64 powerpc_security_features __read_mostly = SEC_FTR_DEFAULT; | |
| enum branch_cache_flush_type { | |
| BRANCH_CACHE_FLUSH_NONE = 0x1, | |
| BRANCH_CACHE_FLUSH_SW = 0x2, | |
| BRANCH_CACHE_FLUSH_HW = 0x4, | |
| }; | |
| static enum branch_cache_flush_type count_cache_flush_type = BRANCH_CACHE_FLUSH_NONE; | |
| static enum branch_cache_flush_type link_stack_flush_type = BRANCH_CACHE_FLUSH_NONE; | |
| bool barrier_nospec_enabled; | |
| static bool no_nospec; | |
| static bool btb_flush_enabled; | |
| #if defined(CONFIG_PPC_E500) || defined(CONFIG_PPC_BOOK3S_64) | |
| static bool no_spectrev2; | |
| #endif | |
| static void enable_barrier_nospec(bool enable) | |
| { | |
| barrier_nospec_enabled = enable; | |
| do_barrier_nospec_fixups(enable); | |
| } | |
| void __init setup_barrier_nospec(void) | |
| { | |
| bool enable; | |
| /* | |
| * It would make sense to check SEC_FTR_SPEC_BAR_ORI31 below as well. | |
| * But there's a good reason not to. The two flags we check below are | |
| * both are enabled by default in the kernel, so if the hcall is not | |
| * functional they will be enabled. | |
| * On a system where the host firmware has been updated (so the ori | |
| * functions as a barrier), but on which the hypervisor (KVM/Qemu) has | |
| * not been updated, we would like to enable the barrier. Dropping the | |
| * check for SEC_FTR_SPEC_BAR_ORI31 achieves that. The only downside is | |
| * we potentially enable the barrier on systems where the host firmware | |
| * is not updated, but that's harmless as it's a no-op. | |
| */ | |
| enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && | |
| security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR); | |
| if (!no_nospec && !cpu_mitigations_off()) | |
| enable_barrier_nospec(enable); | |
| } | |
| static int __init handle_nospectre_v1(char *p) | |
| { | |
| no_nospec = true; | |
| return 0; | |
| } | |
| early_param("nospectre_v1", handle_nospectre_v1); | |
| #ifdef CONFIG_DEBUG_FS | |
| static int barrier_nospec_set(void *data, u64 val) | |
| { | |
| switch (val) { | |
| case 0: | |
| case 1: | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| if (!!val == !!barrier_nospec_enabled) | |
| return 0; | |
| enable_barrier_nospec(!!val); | |
| return 0; | |
| } | |
| static int barrier_nospec_get(void *data, u64 *val) | |
| { | |
| *val = barrier_nospec_enabled ? 1 : 0; | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(fops_barrier_nospec, barrier_nospec_get, | |
| barrier_nospec_set, "%llu\n"); | |
| static __init int barrier_nospec_debugfs_init(void) | |
| { | |
| debugfs_create_file_unsafe("barrier_nospec", 0600, | |
| arch_debugfs_dir, NULL, | |
| &fops_barrier_nospec); | |
| return 0; | |
| } | |
| device_initcall(barrier_nospec_debugfs_init); | |
| static __init int security_feature_debugfs_init(void) | |
| { | |
| debugfs_create_x64("security_features", 0400, arch_debugfs_dir, | |
| &powerpc_security_features); | |
| return 0; | |
| } | |
| device_initcall(security_feature_debugfs_init); | |
| #endif /* CONFIG_DEBUG_FS */ | |
| #if defined(CONFIG_PPC_E500) || defined(CONFIG_PPC_BOOK3S_64) | |
| static int __init handle_nospectre_v2(char *p) | |
| { | |
| no_spectrev2 = true; | |
| return 0; | |
| } | |
| early_param("nospectre_v2", handle_nospectre_v2); | |
| #endif /* CONFIG_PPC_E500 || CONFIG_PPC_BOOK3S_64 */ | |
| #ifdef CONFIG_PPC_E500 | |
| void __init setup_spectre_v2(void) | |
| { | |
| if (no_spectrev2 || cpu_mitigations_off()) | |
| do_btb_flush_fixups(); | |
| else | |
| btb_flush_enabled = true; | |
| } | |
| #endif /* CONFIG_PPC_E500 */ | |
| #ifdef CONFIG_PPC_BOOK3S_64 | |
| ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| bool thread_priv; | |
| thread_priv = security_ftr_enabled(SEC_FTR_L1D_THREAD_PRIV); | |
| if (rfi_flush) { | |
| struct seq_buf s; | |
| seq_buf_init(&s, buf, PAGE_SIZE - 1); | |
| seq_buf_printf(&s, "Mitigation: RFI Flush"); | |
| if (thread_priv) | |
| seq_buf_printf(&s, ", L1D private per thread"); | |
| seq_buf_printf(&s, "\n"); | |
| return s.len; | |
| } | |
| if (thread_priv) | |
| return sysfs_emit(buf, "Vulnerable: L1D private per thread\n"); | |
| if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) && | |
| !security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR)) | |
| return sysfs_emit(buf, "Not affected\n"); | |
| return sysfs_emit(buf, "Vulnerable\n"); | |
| } | |
| ssize_t cpu_show_l1tf(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| return cpu_show_meltdown(dev, attr, buf); | |
| } | |
| #endif | |
| ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct seq_buf s; | |
| seq_buf_init(&s, buf, PAGE_SIZE - 1); | |
| if (security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR)) { | |
| if (barrier_nospec_enabled) | |
| seq_buf_printf(&s, "Mitigation: __user pointer sanitization"); | |
| else | |
| seq_buf_printf(&s, "Vulnerable"); | |
| if (security_ftr_enabled(SEC_FTR_SPEC_BAR_ORI31)) | |
| seq_buf_printf(&s, ", ori31 speculation barrier enabled"); | |
| seq_buf_printf(&s, "\n"); | |
| } else | |
| seq_buf_printf(&s, "Not affected\n"); | |
| return s.len; | |
| } | |
| ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct seq_buf s; | |
| bool bcs, ccd; | |
| seq_buf_init(&s, buf, PAGE_SIZE - 1); | |
| bcs = security_ftr_enabled(SEC_FTR_BCCTRL_SERIALISED); | |
| ccd = security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED); | |
| if (bcs || ccd) { | |
| seq_buf_printf(&s, "Mitigation: "); | |
| if (bcs) | |
| seq_buf_printf(&s, "Indirect branch serialisation (kernel only)"); | |
| if (bcs && ccd) | |
| seq_buf_printf(&s, ", "); | |
| if (ccd) | |
| seq_buf_printf(&s, "Indirect branch cache disabled"); | |
| } else if (count_cache_flush_type != BRANCH_CACHE_FLUSH_NONE) { | |
| seq_buf_printf(&s, "Mitigation: Software count cache flush"); | |
| if (count_cache_flush_type == BRANCH_CACHE_FLUSH_HW) | |
| seq_buf_printf(&s, " (hardware accelerated)"); | |
| } else if (btb_flush_enabled) { | |
| seq_buf_printf(&s, "Mitigation: Branch predictor state flush"); | |
| } else { | |
| seq_buf_printf(&s, "Vulnerable"); | |
| } | |
| if (bcs || ccd || count_cache_flush_type != BRANCH_CACHE_FLUSH_NONE) { | |
| if (link_stack_flush_type != BRANCH_CACHE_FLUSH_NONE) | |
| seq_buf_printf(&s, ", Software link stack flush"); | |
| if (link_stack_flush_type == BRANCH_CACHE_FLUSH_HW) | |
| seq_buf_printf(&s, " (hardware accelerated)"); | |
| } | |
| seq_buf_printf(&s, "\n"); | |
| return s.len; | |
| } | |
| #ifdef CONFIG_PPC_BOOK3S_64 | |
| /* | |
| * Store-forwarding barrier support. | |
| */ | |
| static enum stf_barrier_type stf_enabled_flush_types; | |
| static bool no_stf_barrier; | |
| static bool stf_barrier; | |
| static int __init handle_no_stf_barrier(char *p) | |
| { | |
| pr_info("stf-barrier: disabled on command line."); | |
| no_stf_barrier = true; | |
| return 0; | |
| } | |
| early_param("no_stf_barrier", handle_no_stf_barrier); | |
| enum stf_barrier_type stf_barrier_type_get(void) | |
| { | |
| return stf_enabled_flush_types; | |
| } | |
| /* This is the generic flag used by other architectures */ | |
| static int __init handle_ssbd(char *p) | |
| { | |
| if (!p || strncmp(p, "auto", 5) == 0 || strncmp(p, "on", 2) == 0 ) { | |
| /* Until firmware tells us, we have the barrier with auto */ | |
| return 0; | |
| } else if (strncmp(p, "off", 3) == 0) { | |
| handle_no_stf_barrier(NULL); | |
| return 0; | |
| } else | |
| return 1; | |
| return 0; | |
| } | |
| early_param("spec_store_bypass_disable", handle_ssbd); | |
| /* This is the generic flag used by other architectures */ | |
| static int __init handle_no_ssbd(char *p) | |
| { | |
| handle_no_stf_barrier(NULL); | |
| return 0; | |
| } | |
| early_param("nospec_store_bypass_disable", handle_no_ssbd); | |
| static void stf_barrier_enable(bool enable) | |
| { | |
| if (enable) | |
| do_stf_barrier_fixups(stf_enabled_flush_types); | |
| else | |
| do_stf_barrier_fixups(STF_BARRIER_NONE); | |
| stf_barrier = enable; | |
| } | |
| void setup_stf_barrier(void) | |
| { | |
| enum stf_barrier_type type; | |
| bool enable; | |
| /* Default to fallback in case fw-features are not available */ | |
| if (cpu_has_feature(CPU_FTR_ARCH_300)) | |
| type = STF_BARRIER_EIEIO; | |
| else if (cpu_has_feature(CPU_FTR_ARCH_207S)) | |
| type = STF_BARRIER_SYNC_ORI; | |
| else if (cpu_has_feature(CPU_FTR_ARCH_206)) | |
| type = STF_BARRIER_FALLBACK; | |
| else | |
| type = STF_BARRIER_NONE; | |
| enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && | |
| security_ftr_enabled(SEC_FTR_STF_BARRIER); | |
| if (type == STF_BARRIER_FALLBACK) { | |
| pr_info("stf-barrier: fallback barrier available\n"); | |
| } else if (type == STF_BARRIER_SYNC_ORI) { | |
| pr_info("stf-barrier: hwsync barrier available\n"); | |
| } else if (type == STF_BARRIER_EIEIO) { | |
| pr_info("stf-barrier: eieio barrier available\n"); | |
| } | |
| stf_enabled_flush_types = type; | |
| if (!no_stf_barrier && !cpu_mitigations_off()) | |
| stf_barrier_enable(enable); | |
| } | |
| ssize_t cpu_show_spec_store_bypass(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| if (stf_barrier && stf_enabled_flush_types != STF_BARRIER_NONE) { | |
| const char *type; | |
| switch (stf_enabled_flush_types) { | |
| case STF_BARRIER_EIEIO: | |
| type = "eieio"; | |
| break; | |
| case STF_BARRIER_SYNC_ORI: | |
| type = "hwsync"; | |
| break; | |
| case STF_BARRIER_FALLBACK: | |
| type = "fallback"; | |
| break; | |
| default: | |
| type = "unknown"; | |
| } | |
| return sysfs_emit(buf, "Mitigation: Kernel entry/exit barrier (%s)\n", type); | |
| } | |
| if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) && | |
| !security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR)) | |
| return sysfs_emit(buf, "Not affected\n"); | |
| return sysfs_emit(buf, "Vulnerable\n"); | |
| } | |
| static int ssb_prctl_get(struct task_struct *task) | |
| { | |
| /* | |
| * The STF_BARRIER feature is on by default, so if it's off that means | |
| * firmware has explicitly said the CPU is not vulnerable via either | |
| * the hypercall or device tree. | |
| */ | |
| if (!security_ftr_enabled(SEC_FTR_STF_BARRIER)) | |
| return PR_SPEC_NOT_AFFECTED; | |
| /* | |
| * If the system's CPU has no known barrier (see setup_stf_barrier()) | |
| * then assume that the CPU is not vulnerable. | |
| */ | |
| if (stf_enabled_flush_types == STF_BARRIER_NONE) | |
| return PR_SPEC_NOT_AFFECTED; | |
| /* | |
| * Otherwise the CPU is vulnerable. The barrier is not a global or | |
| * per-process mitigation, so the only value that can be reported here | |
| * is PR_SPEC_ENABLE, which appears as "vulnerable" in /proc. | |
| */ | |
| return PR_SPEC_ENABLE; | |
| } | |
| int arch_prctl_spec_ctrl_get(struct task_struct *task, unsigned long which) | |
| { | |
| switch (which) { | |
| case PR_SPEC_STORE_BYPASS: | |
| return ssb_prctl_get(task); | |
| default: | |
| return -ENODEV; | |
| } | |
| } | |
| #ifdef CONFIG_DEBUG_FS | |
| static int stf_barrier_set(void *data, u64 val) | |
| { | |
| bool enable; | |
| if (val == 1) | |
| enable = true; | |
| else if (val == 0) | |
| enable = false; | |
| else | |
| return -EINVAL; | |
| /* Only do anything if we're changing state */ | |
| if (enable != stf_barrier) | |
| stf_barrier_enable(enable); | |
| return 0; | |
| } | |
| static int stf_barrier_get(void *data, u64 *val) | |
| { | |
| *val = stf_barrier ? 1 : 0; | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(fops_stf_barrier, stf_barrier_get, stf_barrier_set, | |
| "%llu\n"); | |
| static __init int stf_barrier_debugfs_init(void) | |
| { | |
| debugfs_create_file_unsafe("stf_barrier", 0600, arch_debugfs_dir, | |
| NULL, &fops_stf_barrier); | |
| return 0; | |
| } | |
| device_initcall(stf_barrier_debugfs_init); | |
| #endif /* CONFIG_DEBUG_FS */ | |
| static void update_branch_cache_flush(void) | |
| { | |
| u32 *site, __maybe_unused *site2; | |
| #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE | |
| site = &patch__call_kvm_flush_link_stack; | |
| site2 = &patch__call_kvm_flush_link_stack_p9; | |
| // This controls the branch from guest_exit_cont to kvm_flush_link_stack | |
| if (link_stack_flush_type == BRANCH_CACHE_FLUSH_NONE) { | |
| patch_instruction_site(site, ppc_inst(PPC_RAW_NOP())); | |
| patch_instruction_site(site2, ppc_inst(PPC_RAW_NOP())); | |
| } else { | |
| // Could use HW flush, but that could also flush count cache | |
| patch_branch_site(site, (u64)&kvm_flush_link_stack, BRANCH_SET_LINK); | |
| patch_branch_site(site2, (u64)&kvm_flush_link_stack, BRANCH_SET_LINK); | |
| } | |
| #endif | |
| // Patch out the bcctr first, then nop the rest | |
| site = &patch__call_flush_branch_caches3; | |
| patch_instruction_site(site, ppc_inst(PPC_RAW_NOP())); | |
| site = &patch__call_flush_branch_caches2; | |
| patch_instruction_site(site, ppc_inst(PPC_RAW_NOP())); | |
| site = &patch__call_flush_branch_caches1; | |
| patch_instruction_site(site, ppc_inst(PPC_RAW_NOP())); | |
| // This controls the branch from _switch to flush_branch_caches | |
| if (count_cache_flush_type == BRANCH_CACHE_FLUSH_NONE && | |
| link_stack_flush_type == BRANCH_CACHE_FLUSH_NONE) { | |
| // Nothing to be done | |
| } else if (count_cache_flush_type == BRANCH_CACHE_FLUSH_HW && | |
| link_stack_flush_type == BRANCH_CACHE_FLUSH_HW) { | |
| // Patch in the bcctr last | |
| site = &patch__call_flush_branch_caches1; | |
| patch_instruction_site(site, ppc_inst(0x39207fff)); // li r9,0x7fff | |
| site = &patch__call_flush_branch_caches2; | |
| patch_instruction_site(site, ppc_inst(0x7d2903a6)); // mtctr r9 | |
| site = &patch__call_flush_branch_caches3; | |
| patch_instruction_site(site, ppc_inst(PPC_INST_BCCTR_FLUSH)); | |
| } else { | |
| patch_branch_site(site, (u64)&flush_branch_caches, BRANCH_SET_LINK); | |
| // If we just need to flush the link stack, early return | |
| if (count_cache_flush_type == BRANCH_CACHE_FLUSH_NONE) { | |
| patch_instruction_site(&patch__flush_link_stack_return, | |
| ppc_inst(PPC_RAW_BLR())); | |
| // If we have flush instruction, early return | |
| } else if (count_cache_flush_type == BRANCH_CACHE_FLUSH_HW) { | |
| patch_instruction_site(&patch__flush_count_cache_return, | |
| ppc_inst(PPC_RAW_BLR())); | |
| } | |
| } | |
| } | |
| static void toggle_branch_cache_flush(bool enable) | |
| { | |
| if (!enable || !security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) { | |
| if (count_cache_flush_type != BRANCH_CACHE_FLUSH_NONE) | |
| count_cache_flush_type = BRANCH_CACHE_FLUSH_NONE; | |
| pr_info("count-cache-flush: flush disabled.\n"); | |
| } else { | |
| if (security_ftr_enabled(SEC_FTR_BCCTR_FLUSH_ASSIST)) { | |
| count_cache_flush_type = BRANCH_CACHE_FLUSH_HW; | |
| pr_info("count-cache-flush: hardware flush enabled.\n"); | |
| } else { | |
| count_cache_flush_type = BRANCH_CACHE_FLUSH_SW; | |
| pr_info("count-cache-flush: software flush enabled.\n"); | |
| } | |
| } | |
| if (!enable || !security_ftr_enabled(SEC_FTR_FLUSH_LINK_STACK)) { | |
| if (link_stack_flush_type != BRANCH_CACHE_FLUSH_NONE) | |
| link_stack_flush_type = BRANCH_CACHE_FLUSH_NONE; | |
| pr_info("link-stack-flush: flush disabled.\n"); | |
| } else { | |
| if (security_ftr_enabled(SEC_FTR_BCCTR_LINK_FLUSH_ASSIST)) { | |
| link_stack_flush_type = BRANCH_CACHE_FLUSH_HW; | |
| pr_info("link-stack-flush: hardware flush enabled.\n"); | |
| } else { | |
| link_stack_flush_type = BRANCH_CACHE_FLUSH_SW; | |
| pr_info("link-stack-flush: software flush enabled.\n"); | |
| } | |
| } | |
| update_branch_cache_flush(); | |
| } | |
| void setup_count_cache_flush(void) | |
| { | |
| bool enable = true; | |
| if (no_spectrev2 || cpu_mitigations_off()) { | |
| if (security_ftr_enabled(SEC_FTR_BCCTRL_SERIALISED) || | |
| security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED)) | |
| pr_warn("Spectre v2 mitigations not fully under software control, can't disable\n"); | |
| enable = false; | |
| } | |
| /* | |
| * There's no firmware feature flag/hypervisor bit to tell us we need to | |
| * flush the link stack on context switch. So we set it here if we see | |
| * either of the Spectre v2 mitigations that aim to protect userspace. | |
| */ | |
| if (security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED) || | |
| security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) | |
| security_ftr_set(SEC_FTR_FLUSH_LINK_STACK); | |
| toggle_branch_cache_flush(enable); | |
| } | |
| static enum l1d_flush_type enabled_flush_types; | |
| static void *l1d_flush_fallback_area; | |
| static bool no_rfi_flush; | |
| static bool no_entry_flush; | |
| static bool no_uaccess_flush; | |
| bool rfi_flush; | |
| static bool entry_flush; | |
| static bool uaccess_flush; | |
| DEFINE_STATIC_KEY_FALSE(uaccess_flush_key); | |
| EXPORT_SYMBOL(uaccess_flush_key); | |
| static int __init handle_no_rfi_flush(char *p) | |
| { | |
| pr_info("rfi-flush: disabled on command line."); | |
| no_rfi_flush = true; | |
| return 0; | |
| } | |
| early_param("no_rfi_flush", handle_no_rfi_flush); | |
| static int __init handle_no_entry_flush(char *p) | |
| { | |
| pr_info("entry-flush: disabled on command line."); | |
| no_entry_flush = true; | |
| return 0; | |
| } | |
| early_param("no_entry_flush", handle_no_entry_flush); | |
| static int __init handle_no_uaccess_flush(char *p) | |
| { | |
| pr_info("uaccess-flush: disabled on command line."); | |
| no_uaccess_flush = true; | |
| return 0; | |
| } | |
| early_param("no_uaccess_flush", handle_no_uaccess_flush); | |
| /* | |
| * The RFI flush is not KPTI, but because users will see doco that says to use | |
| * nopti we hijack that option here to also disable the RFI flush. | |
| */ | |
| static int __init handle_no_pti(char *p) | |
| { | |
| pr_info("rfi-flush: disabling due to 'nopti' on command line.\n"); | |
| handle_no_rfi_flush(NULL); | |
| return 0; | |
| } | |
| early_param("nopti", handle_no_pti); | |
| static void do_nothing(void *unused) | |
| { | |
| /* | |
| * We don't need to do the flush explicitly, just enter+exit kernel is | |
| * sufficient, the RFI exit handlers will do the right thing. | |
| */ | |
| } | |
| void rfi_flush_enable(bool enable) | |
| { | |
| if (enable) { | |
| do_rfi_flush_fixups(enabled_flush_types); | |
| on_each_cpu(do_nothing, NULL, 1); | |
| } else | |
| do_rfi_flush_fixups(L1D_FLUSH_NONE); | |
| rfi_flush = enable; | |
| } | |
| static void entry_flush_enable(bool enable) | |
| { | |
| if (enable) { | |
| do_entry_flush_fixups(enabled_flush_types); | |
| on_each_cpu(do_nothing, NULL, 1); | |
| } else { | |
| do_entry_flush_fixups(L1D_FLUSH_NONE); | |
| } | |
| entry_flush = enable; | |
| } | |
| static void uaccess_flush_enable(bool enable) | |
| { | |
| if (enable) { | |
| do_uaccess_flush_fixups(enabled_flush_types); | |
| static_branch_enable(&uaccess_flush_key); | |
| on_each_cpu(do_nothing, NULL, 1); | |
| } else { | |
| static_branch_disable(&uaccess_flush_key); | |
| do_uaccess_flush_fixups(L1D_FLUSH_NONE); | |
| } | |
| uaccess_flush = enable; | |
| } | |
| static void __ref init_fallback_flush(void) | |
| { | |
| u64 l1d_size, limit; | |
| int cpu; | |
| /* Only allocate the fallback flush area once (at boot time). */ | |
| if (l1d_flush_fallback_area) | |
| return; | |
| l1d_size = ppc64_caches.l1d.size; | |
| /* | |
| * If there is no d-cache-size property in the device tree, l1d_size | |
| * could be zero. That leads to the loop in the asm wrapping around to | |
| * 2^64-1, and then walking off the end of the fallback area and | |
| * eventually causing a page fault which is fatal. Just default to | |
| * something vaguely sane. | |
| */ | |
| if (!l1d_size) | |
| l1d_size = (64 * 1024); | |
| limit = min(ppc64_bolted_size(), ppc64_rma_size); | |
| /* | |
| * Align to L1d size, and size it at 2x L1d size, to catch possible | |
| * hardware prefetch runoff. We don't have a recipe for load patterns to | |
| * reliably avoid the prefetcher. | |
| */ | |
| l1d_flush_fallback_area = memblock_alloc_try_nid(l1d_size * 2, | |
| l1d_size, MEMBLOCK_LOW_LIMIT, | |
| limit, NUMA_NO_NODE); | |
| if (!l1d_flush_fallback_area) | |
| panic("%s: Failed to allocate %llu bytes align=0x%llx max_addr=%pa\n", | |
| __func__, l1d_size * 2, l1d_size, &limit); | |
| for_each_possible_cpu(cpu) { | |
| struct paca_struct *paca = paca_ptrs[cpu]; | |
| paca->rfi_flush_fallback_area = l1d_flush_fallback_area; | |
| paca->l1d_flush_size = l1d_size; | |
| } | |
| } | |
| void setup_rfi_flush(enum l1d_flush_type types, bool enable) | |
| { | |
| if (types & L1D_FLUSH_FALLBACK) { | |
| pr_info("rfi-flush: fallback displacement flush available\n"); | |
| init_fallback_flush(); | |
| } | |
| if (types & L1D_FLUSH_ORI) | |
| pr_info("rfi-flush: ori type flush available\n"); | |
| if (types & L1D_FLUSH_MTTRIG) | |
| pr_info("rfi-flush: mttrig type flush available\n"); | |
| enabled_flush_types = types; | |
| if (!cpu_mitigations_off() && !no_rfi_flush) | |
| rfi_flush_enable(enable); | |
| } | |
| void setup_entry_flush(bool enable) | |
| { | |
| if (cpu_mitigations_off()) | |
| return; | |
| if (!no_entry_flush) | |
| entry_flush_enable(enable); | |
| } | |
| void setup_uaccess_flush(bool enable) | |
| { | |
| if (cpu_mitigations_off()) | |
| return; | |
| if (!no_uaccess_flush) | |
| uaccess_flush_enable(enable); | |
| } | |
| #ifdef CONFIG_DEBUG_FS | |
| static int count_cache_flush_set(void *data, u64 val) | |
| { | |
| bool enable; | |
| if (val == 1) | |
| enable = true; | |
| else if (val == 0) | |
| enable = false; | |
| else | |
| return -EINVAL; | |
| toggle_branch_cache_flush(enable); | |
| return 0; | |
| } | |
| static int count_cache_flush_get(void *data, u64 *val) | |
| { | |
| if (count_cache_flush_type == BRANCH_CACHE_FLUSH_NONE) | |
| *val = 0; | |
| else | |
| *val = 1; | |
| return 0; | |
| } | |
| static int link_stack_flush_get(void *data, u64 *val) | |
| { | |
| if (link_stack_flush_type == BRANCH_CACHE_FLUSH_NONE) | |
| *val = 0; | |
| else | |
| *val = 1; | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(fops_count_cache_flush, count_cache_flush_get, | |
| count_cache_flush_set, "%llu\n"); | |
| DEFINE_DEBUGFS_ATTRIBUTE(fops_link_stack_flush, link_stack_flush_get, | |
| count_cache_flush_set, "%llu\n"); | |
| static __init int count_cache_flush_debugfs_init(void) | |
| { | |
| debugfs_create_file_unsafe("count_cache_flush", 0600, | |
| arch_debugfs_dir, NULL, | |
| &fops_count_cache_flush); | |
| debugfs_create_file_unsafe("link_stack_flush", 0600, | |
| arch_debugfs_dir, NULL, | |
| &fops_link_stack_flush); | |
| return 0; | |
| } | |
| device_initcall(count_cache_flush_debugfs_init); | |
| static int rfi_flush_set(void *data, u64 val) | |
| { | |
| bool enable; | |
| if (val == 1) | |
| enable = true; | |
| else if (val == 0) | |
| enable = false; | |
| else | |
| return -EINVAL; | |
| /* Only do anything if we're changing state */ | |
| if (enable != rfi_flush) | |
| rfi_flush_enable(enable); | |
| return 0; | |
| } | |
| static int rfi_flush_get(void *data, u64 *val) | |
| { | |
| *val = rfi_flush ? 1 : 0; | |
| return 0; | |
| } | |
| DEFINE_SIMPLE_ATTRIBUTE(fops_rfi_flush, rfi_flush_get, rfi_flush_set, "%llu\n"); | |
| static int entry_flush_set(void *data, u64 val) | |
| { | |
| bool enable; | |
| if (val == 1) | |
| enable = true; | |
| else if (val == 0) | |
| enable = false; | |
| else | |
| return -EINVAL; | |
| /* Only do anything if we're changing state */ | |
| if (enable != entry_flush) | |
| entry_flush_enable(enable); | |
| return 0; | |
| } | |
| static int entry_flush_get(void *data, u64 *val) | |
| { | |
| *val = entry_flush ? 1 : 0; | |
| return 0; | |
| } | |
| DEFINE_SIMPLE_ATTRIBUTE(fops_entry_flush, entry_flush_get, entry_flush_set, "%llu\n"); | |
| static int uaccess_flush_set(void *data, u64 val) | |
| { | |
| bool enable; | |
| if (val == 1) | |
| enable = true; | |
| else if (val == 0) | |
| enable = false; | |
| else | |
| return -EINVAL; | |
| /* Only do anything if we're changing state */ | |
| if (enable != uaccess_flush) | |
| uaccess_flush_enable(enable); | |
| return 0; | |
| } | |
| static int uaccess_flush_get(void *data, u64 *val) | |
| { | |
| *val = uaccess_flush ? 1 : 0; | |
| return 0; | |
| } | |
| DEFINE_SIMPLE_ATTRIBUTE(fops_uaccess_flush, uaccess_flush_get, uaccess_flush_set, "%llu\n"); | |
| static __init int rfi_flush_debugfs_init(void) | |
| { | |
| debugfs_create_file("rfi_flush", 0600, arch_debugfs_dir, NULL, &fops_rfi_flush); | |
| debugfs_create_file("entry_flush", 0600, arch_debugfs_dir, NULL, &fops_entry_flush); | |
| debugfs_create_file("uaccess_flush", 0600, arch_debugfs_dir, NULL, &fops_uaccess_flush); | |
| return 0; | |
| } | |
| device_initcall(rfi_flush_debugfs_init); | |
| #endif /* CONFIG_DEBUG_FS */ | |
| #endif /* CONFIG_PPC_BOOK3S_64 */ |