blob: 5b4cb725f60f2dcbc07fca5789444a233d2d169d [file] [log] [blame]
/**********************************************************************
* Author: Cavium, Inc.
*
* Contact: support@cavium.com
* Please include "LiquidIO" in the subject.
*
* Copyright (c) 2003-2016 Cavium, Inc.
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more details.
***********************************************************************/
/*! \file octeon_main.h
* \brief Host Driver: This file is included by all host driver source files
* to include common definitions.
*/
#ifndef _OCTEON_MAIN_H_
#define _OCTEON_MAIN_H_
#include <linux/sched/signal.h>
#if BITS_PER_LONG == 32
#define CVM_CAST64(v) ((long long)(v))
#elif BITS_PER_LONG == 64
#define CVM_CAST64(v) ((long long)(long)(v))
#else
#error "Unknown system architecture"
#endif
#define DRV_NAME "LiquidIO"
struct octeon_device_priv {
/** Tasklet structures for this device. */
struct tasklet_struct droq_tasklet;
unsigned long napi_mask;
struct octeon_device *dev;
};
/** This structure is used by NIC driver to store information required
* to free the sk_buff when the packet has been fetched by Octeon.
* Bytes offset below assume worst-case of a 64-bit system.
*/
struct octnet_buf_free_info {
/** Bytes 1-8. Pointer to network device private structure. */
struct lio *lio;
/** Bytes 9-16. Pointer to sk_buff. */
struct sk_buff *skb;
/** Bytes 17-24. Pointer to gather list. */
struct octnic_gather *g;
/** Bytes 25-32. Physical address of skb->data or gather list. */
u64 dptr;
/** Bytes 33-47. Piggybacked soft command, if any */
struct octeon_soft_command *sc;
};
/* BQL-related functions */
int octeon_report_sent_bytes_to_bql(void *buf, int reqtype);
void octeon_update_tx_completion_counters(void *buf, int reqtype,
unsigned int *pkts_compl,
unsigned int *bytes_compl);
void octeon_report_tx_completion_to_bql(void *txq, unsigned int pkts_compl,
unsigned int bytes_compl);
void octeon_pf_changed_vf_macaddr(struct octeon_device *oct, u8 *mac);
void octeon_schedule_rxq_oom_work(struct octeon_device *oct,
struct octeon_droq *droq);
/** Swap 8B blocks */
static inline void octeon_swap_8B_data(u64 *data, u32 blocks)
{
while (blocks) {
cpu_to_be64s(data);
blocks--;
data++;
}
}
/**
* \brief unmaps a PCI BAR
* @param oct Pointer to Octeon device
* @param baridx bar index
*/
static inline void octeon_unmap_pci_barx(struct octeon_device *oct, int baridx)
{
dev_dbg(&oct->pci_dev->dev, "Freeing PCI mapped regions for Bar%d\n",
baridx);
if (oct->mmio[baridx].done)
iounmap(oct->mmio[baridx].hw_addr);
if (oct->mmio[baridx].start)
pci_release_region(oct->pci_dev, baridx * 2);
}
/**
* \brief maps a PCI BAR
* @param oct Pointer to Octeon device
* @param baridx bar index
* @param max_map_len maximum length of mapped memory
*/
static inline int octeon_map_pci_barx(struct octeon_device *oct,
int baridx, int max_map_len)
{
u32 mapped_len = 0;
if (pci_request_region(oct->pci_dev, baridx * 2, DRV_NAME)) {
dev_err(&oct->pci_dev->dev, "pci_request_region failed for bar %d\n",
baridx);
return 1;
}
oct->mmio[baridx].start = pci_resource_start(oct->pci_dev, baridx * 2);
oct->mmio[baridx].len = pci_resource_len(oct->pci_dev, baridx * 2);
mapped_len = oct->mmio[baridx].len;
if (!mapped_len)
goto err_release_region;
if (max_map_len && (mapped_len > max_map_len))
mapped_len = max_map_len;
oct->mmio[baridx].hw_addr =
ioremap(oct->mmio[baridx].start, mapped_len);
oct->mmio[baridx].mapped_len = mapped_len;
dev_dbg(&oct->pci_dev->dev, "BAR%d start: 0x%llx mapped %u of %u bytes\n",
baridx, oct->mmio[baridx].start, mapped_len,
oct->mmio[baridx].len);
if (!oct->mmio[baridx].hw_addr) {
dev_err(&oct->pci_dev->dev, "error ioremap for bar %d\n",
baridx);
goto err_release_region;
}
oct->mmio[baridx].done = 1;
return 0;
err_release_region:
pci_release_region(oct->pci_dev, baridx * 2);
return 1;
}
/* input parameter:
* sc: pointer to a soft request
* timeout: milli sec which an application wants to wait for the
response of the request.
* 0: the request will wait until its response gets back
* from the firmware within LIO_SC_MAX_TMO_MS milli sec.
* It the response does not return within
* LIO_SC_MAX_TMO_MS milli sec, lio_process_ordered_list()
* will move the request to zombie response list.
*
* return value:
* 0: got the response from firmware for the sc request.
* errno -EINTR: user abort the command.
* errno -ETIME: user spefified timeout value has been expired.
* errno -EBUSY: the response of the request does not return in
* resonable time (LIO_SC_MAX_TMO_MS).
* the sc wll be move to zombie response list by
* lio_process_ordered_list()
*
* A request with non-zero return value, the sc->caller_is_done
* will be marked 1.
* When getting a request with zero return value, the requestor
* should mark sc->caller_is_done with 1 after examing the
* response of sc.
* lio_process_ordered_list() will free the soft command on behalf
* of the soft command requestor.
* This is to fix the possible race condition of both timeout process
* and lio_process_ordered_list()/callback function to free a
* sc strucutre.
*/
static inline int
wait_for_sc_completion_timeout(struct octeon_device *oct_dev,
struct octeon_soft_command *sc,
unsigned long timeout)
{
int errno = 0;
long timeout_jiff;
if (timeout)
timeout_jiff = msecs_to_jiffies(timeout);
else
timeout_jiff = MAX_SCHEDULE_TIMEOUT;
timeout_jiff =
wait_for_completion_interruptible_timeout(&sc->complete,
timeout_jiff);
if (timeout_jiff == 0) {
dev_err(&oct_dev->pci_dev->dev, "%s: sc is timeout\n",
__func__);
WRITE_ONCE(sc->caller_is_done, true);
errno = -ETIME;
} else if (timeout_jiff == -ERESTARTSYS) {
dev_err(&oct_dev->pci_dev->dev, "%s: sc is interrupted\n",
__func__);
WRITE_ONCE(sc->caller_is_done, true);
errno = -EINTR;
} else if (sc->sc_status == OCTEON_REQUEST_TIMEOUT) {
dev_err(&oct_dev->pci_dev->dev, "%s: sc has fatal timeout\n",
__func__);
WRITE_ONCE(sc->caller_is_done, true);
errno = -EBUSY;
}
return errno;
}
#ifndef ROUNDUP4
#define ROUNDUP4(val) (((val) + 3) & 0xfffffffc)
#endif
#ifndef ROUNDUP8
#define ROUNDUP8(val) (((val) + 7) & 0xfffffff8)
#endif
#ifndef ROUNDUP16
#define ROUNDUP16(val) (((val) + 15) & 0xfffffff0)
#endif
#ifndef ROUNDUP128
#define ROUNDUP128(val) (((val) + 127) & 0xffffff80)
#endif
#endif /* _OCTEON_MAIN_H_ */