Google Git
Sign in
android-kvm / linux / 9557e60b8c3521e43bf5f21db95b2b42d7c43ac9 / . / drivers / net / wireless / ath / ath11k / hal_desc.h
blob: 00b595b84939f759f8457d6cf8af1f62cdfa85fa [file] [log] [blame]
/* SPDX-License-Identifier: BSD-3-Clause-Clear */
/*
* Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
*/
#include "core.h"
#ifndef ATH11K_HAL_DESC_H
#define ATH11K_HAL_DESC_H
#define BUFFER_ADDR_INFO0_ADDR GENMASK(31, 0)
#define BUFFER_ADDR_INFO1_ADDR GENMASK(7, 0)
#define BUFFER_ADDR_INFO1_RET_BUF_MGR GENMASK(10, 8)
#define BUFFER_ADDR_INFO1_SW_COOKIE GENMASK(31, 11)
struct ath11k_buffer_addr {
u32 info0;
u32 info1;
} __packed;
/* ath11k_buffer_addr
*
* info0
* Address (lower 32 bits) of the msdu buffer or msdu extension
* descriptor or Link descriptor
*
* addr
* Address (upper 8 bits) of the msdu buffer or msdu extension
* descriptor or Link descriptor
*
* return_buffer_manager (RBM)
* Consumer: WBM
* Producer: SW/FW
* Indicates to which buffer manager the buffer or MSDU_EXTENSION
* descriptor or link descriptor that is being pointed to shall be
* returned after the frame has been processed. It is used by WBM
* for routing purposes.
*
* Values are defined in enum %HAL_RX_BUF_RBM_
*
* sw_buffer_cookie
* Cookie field exclusively used by SW. HW ignores the contents,
* accept that it passes the programmed value on to other
* descriptors together with the physical address.
*
* Field can be used by SW to for example associate the buffers
* physical address with the virtual address.
*/
enum hal_tlv_tag {
HAL_MACTX_CBF_START = 0 /* 0x0 */,
HAL_PHYRX_DATA = 1 /* 0x1 */,
HAL_PHYRX_CBF_DATA_RESP = 2 /* 0x2 */,
HAL_PHYRX_ABORT_REQUEST = 3 /* 0x3 */,
HAL_PHYRX_USER_ABORT_NOTIFICATION = 4 /* 0x4 */,
HAL_MACTX_DATA_RESP = 5 /* 0x5 */,
HAL_MACTX_CBF_DATA = 6 /* 0x6 */,
HAL_MACTX_CBF_DONE = 7 /* 0x7 */,
HAL_MACRX_CBF_READ_REQUEST = 8 /* 0x8 */,
HAL_MACRX_CBF_DATA_REQUEST = 9 /* 0x9 */,
HAL_MACRX_EXPECT_NDP_RECEPTION = 10 /* 0xa */,
HAL_MACRX_FREEZE_CAPTURE_CHANNEL = 11 /* 0xb */,
HAL_MACRX_NDP_TIMEOUT = 12 /* 0xc */,
HAL_MACRX_ABORT_ACK = 13 /* 0xd */,
HAL_MACRX_REQ_IMPLICIT_FB = 14 /* 0xe */,
HAL_MACRX_CHAIN_MASK = 15 /* 0xf */,
HAL_MACRX_NAP_USER = 16 /* 0x10 */,
HAL_MACRX_ABORT_REQUEST = 17 /* 0x11 */,
HAL_PHYTX_OTHER_TRANSMIT_INFO16 = 18 /* 0x12 */,
HAL_PHYTX_ABORT_ACK = 19 /* 0x13 */,
HAL_PHYTX_ABORT_REQUEST = 20 /* 0x14 */,
HAL_PHYTX_PKT_END = 21 /* 0x15 */,
HAL_PHYTX_PPDU_HEADER_INFO_REQUEST = 22 /* 0x16 */,
HAL_PHYTX_REQUEST_CTRL_INFO = 23 /* 0x17 */,
HAL_PHYTX_DATA_REQUEST = 24 /* 0x18 */,
HAL_PHYTX_BF_CV_LOADING_DONE = 25 /* 0x19 */,
HAL_PHYTX_NAP_ACK = 26 /* 0x1a */,
HAL_PHYTX_NAP_DONE = 27 /* 0x1b */,
HAL_PHYTX_OFF_ACK = 28 /* 0x1c */,
HAL_PHYTX_ON_ACK = 29 /* 0x1d */,
HAL_PHYTX_SYNTH_OFF_ACK = 30 /* 0x1e */,
HAL_PHYTX_DEBUG16 = 31 /* 0x1f */,
HAL_MACTX_ABORT_REQUEST = 32 /* 0x20 */,
HAL_MACTX_ABORT_ACK = 33 /* 0x21 */,
HAL_MACTX_PKT_END = 34 /* 0x22 */,
HAL_MACTX_PRE_PHY_DESC = 35 /* 0x23 */,
HAL_MACTX_BF_PARAMS_COMMON = 36 /* 0x24 */,
HAL_MACTX_BF_PARAMS_PER_USER = 37 /* 0x25 */,
HAL_MACTX_PREFETCH_CV = 38 /* 0x26 */,
HAL_MACTX_USER_DESC_COMMON = 39 /* 0x27 */,
HAL_MACTX_USER_DESC_PER_USER = 40 /* 0x28 */,
HAL_EXAMPLE_USER_TLV_16 = 41 /* 0x29 */,
HAL_EXAMPLE_TLV_16 = 42 /* 0x2a */,
HAL_MACTX_PHY_OFF = 43 /* 0x2b */,
HAL_MACTX_PHY_ON = 44 /* 0x2c */,
HAL_MACTX_SYNTH_OFF = 45 /* 0x2d */,
HAL_MACTX_EXPECT_CBF_COMMON = 46 /* 0x2e */,
HAL_MACTX_EXPECT_CBF_PER_USER = 47 /* 0x2f */,
HAL_MACTX_PHY_DESC = 48 /* 0x30 */,
HAL_MACTX_L_SIG_A = 49 /* 0x31 */,
HAL_MACTX_L_SIG_B = 50 /* 0x32 */,
HAL_MACTX_HT_SIG = 51 /* 0x33 */,
HAL_MACTX_VHT_SIG_A = 52 /* 0x34 */,
HAL_MACTX_VHT_SIG_B_SU20 = 53 /* 0x35 */,
HAL_MACTX_VHT_SIG_B_SU40 = 54 /* 0x36 */,
HAL_MACTX_VHT_SIG_B_SU80 = 55 /* 0x37 */,
HAL_MACTX_VHT_SIG_B_SU160 = 56 /* 0x38 */,
HAL_MACTX_VHT_SIG_B_MU20 = 57 /* 0x39 */,
HAL_MACTX_VHT_SIG_B_MU40 = 58 /* 0x3a */,
HAL_MACTX_VHT_SIG_B_MU80 = 59 /* 0x3b */,
HAL_MACTX_VHT_SIG_B_MU160 = 60 /* 0x3c */,
HAL_MACTX_SERVICE = 61 /* 0x3d */,
HAL_MACTX_HE_SIG_A_SU = 62 /* 0x3e */,
HAL_MACTX_HE_SIG_A_MU_DL = 63 /* 0x3f */,
HAL_MACTX_HE_SIG_A_MU_UL = 64 /* 0x40 */,
HAL_MACTX_HE_SIG_B1_MU = 65 /* 0x41 */,
HAL_MACTX_HE_SIG_B2_MU = 66 /* 0x42 */,
HAL_MACTX_HE_SIG_B2_OFDMA = 67 /* 0x43 */,
HAL_MACTX_DELETE_CV = 68 /* 0x44 */,
HAL_MACTX_MU_UPLINK_COMMON = 69 /* 0x45 */,
HAL_MACTX_MU_UPLINK_USER_SETUP = 70 /* 0x46 */,
HAL_MACTX_OTHER_TRANSMIT_INFO = 71 /* 0x47 */,
HAL_MACTX_PHY_NAP = 72 /* 0x48 */,
HAL_MACTX_DEBUG = 73 /* 0x49 */,
HAL_PHYRX_ABORT_ACK = 74 /* 0x4a */,
HAL_PHYRX_GENERATED_CBF_DETAILS = 75 /* 0x4b */,
HAL_PHYRX_RSSI_LEGACY = 76 /* 0x4c */,
HAL_PHYRX_RSSI_HT = 77 /* 0x4d */,
HAL_PHYRX_USER_INFO = 78 /* 0x4e */,
HAL_PHYRX_PKT_END = 79 /* 0x4f */,
HAL_PHYRX_DEBUG = 80 /* 0x50 */,
HAL_PHYRX_CBF_TRANSFER_DONE = 81 /* 0x51 */,
HAL_PHYRX_CBF_TRANSFER_ABORT = 82 /* 0x52 */,
HAL_PHYRX_L_SIG_A = 83 /* 0x53 */,
HAL_PHYRX_L_SIG_B = 84 /* 0x54 */,
HAL_PHYRX_HT_SIG = 85 /* 0x55 */,
HAL_PHYRX_VHT_SIG_A = 86 /* 0x56 */,
HAL_PHYRX_VHT_SIG_B_SU20 = 87 /* 0x57 */,
HAL_PHYRX_VHT_SIG_B_SU40 = 88 /* 0x58 */,
HAL_PHYRX_VHT_SIG_B_SU80 = 89 /* 0x59 */,
HAL_PHYRX_VHT_SIG_B_SU160 = 90 /* 0x5a */,
HAL_PHYRX_VHT_SIG_B_MU20 = 91 /* 0x5b */,
HAL_PHYRX_VHT_SIG_B_MU40 = 92 /* 0x5c */,
HAL_PHYRX_VHT_SIG_B_MU80 = 93 /* 0x5d */,
HAL_PHYRX_VHT_SIG_B_MU160 = 94 /* 0x5e */,
HAL_PHYRX_HE_SIG_A_SU = 95 /* 0x5f */,
HAL_PHYRX_HE_SIG_A_MU_DL = 96 /* 0x60 */,
HAL_PHYRX_HE_SIG_A_MU_UL = 97 /* 0x61 */,
HAL_PHYRX_HE_SIG_B1_MU = 98 /* 0x62 */,
HAL_PHYRX_HE_SIG_B2_MU = 99 /* 0x63 */,
HAL_PHYRX_HE_SIG_B2_OFDMA = 100 /* 0x64 */,
HAL_PHYRX_OTHER_RECEIVE_INFO = 101 /* 0x65 */,
HAL_PHYRX_COMMON_USER_INFO = 102 /* 0x66 */,
HAL_PHYRX_DATA_DONE = 103 /* 0x67 */,
HAL_RECEIVE_RSSI_INFO = 104 /* 0x68 */,
HAL_RECEIVE_USER_INFO = 105 /* 0x69 */,
HAL_MIMO_CONTROL_INFO = 106 /* 0x6a */,
HAL_RX_LOCATION_INFO = 107 /* 0x6b */,
HAL_COEX_TX_REQ = 108 /* 0x6c */,
HAL_DUMMY = 109 /* 0x6d */,
HAL_RX_TIMING_OFFSET_INFO = 110 /* 0x6e */,
HAL_EXAMPLE_TLV_32_NAME = 111 /* 0x6f */,
HAL_MPDU_LIMIT = 112 /* 0x70 */,
HAL_NA_LENGTH_END = 113 /* 0x71 */,
HAL_OLE_BUF_STATUS = 114 /* 0x72 */,
HAL_PCU_PPDU_SETUP_DONE = 115 /* 0x73 */,
HAL_PCU_PPDU_SETUP_END = 116 /* 0x74 */,
HAL_PCU_PPDU_SETUP_INIT = 117 /* 0x75 */,
HAL_PCU_PPDU_SETUP_START = 118 /* 0x76 */,
HAL_PDG_FES_SETUP = 119 /* 0x77 */,
HAL_PDG_RESPONSE = 120 /* 0x78 */,
HAL_PDG_TX_REQ = 121 /* 0x79 */,
HAL_SCH_WAIT_INSTR = 122 /* 0x7a */,
HAL_SCHEDULER_TLV = 123 /* 0x7b */,
HAL_TQM_FLOW_EMPTY_STATUS = 124 /* 0x7c */,
HAL_TQM_FLOW_NOT_EMPTY_STATUS = 125 /* 0x7d */,
HAL_TQM_GEN_MPDU_LENGTH_LIST = 126 /* 0x7e */,
HAL_TQM_GEN_MPDU_LENGTH_LIST_STATUS = 127 /* 0x7f */,
HAL_TQM_GEN_MPDUS = 128 /* 0x80 */,
HAL_TQM_GEN_MPDUS_STATUS = 129 /* 0x81 */,
HAL_TQM_REMOVE_MPDU = 130 /* 0x82 */,
HAL_TQM_REMOVE_MPDU_STATUS = 131 /* 0x83 */,
HAL_TQM_REMOVE_MSDU = 132 /* 0x84 */,
HAL_TQM_REMOVE_MSDU_STATUS = 133 /* 0x85 */,
HAL_TQM_UPDATE_TX_MPDU_COUNT = 134 /* 0x86 */,
HAL_TQM_WRITE_CMD = 135 /* 0x87 */,
HAL_OFDMA_TRIGGER_DETAILS = 136 /* 0x88 */,
HAL_TX_DATA = 137 /* 0x89 */,
HAL_TX_FES_SETUP = 138 /* 0x8a */,
HAL_RX_PACKET = 139 /* 0x8b */,
HAL_EXPECTED_RESPONSE = 140 /* 0x8c */,
HAL_TX_MPDU_END = 141 /* 0x8d */,
HAL_TX_MPDU_START = 142 /* 0x8e */,
HAL_TX_MSDU_END = 143 /* 0x8f */,
HAL_TX_MSDU_START = 144 /* 0x90 */,
HAL_TX_SW_MODE_SETUP = 145 /* 0x91 */,
HAL_TXPCU_BUFFER_STATUS = 146 /* 0x92 */,
HAL_TXPCU_USER_BUFFER_STATUS = 147 /* 0x93 */,
HAL_DATA_TO_TIME_CONFIG = 148 /* 0x94 */,
HAL_EXAMPLE_USER_TLV_32 = 149 /* 0x95 */,
HAL_MPDU_INFO = 150 /* 0x96 */,
HAL_PDG_USER_SETUP = 151 /* 0x97 */,
HAL_TX_11AH_SETUP = 152 /* 0x98 */,
HAL_REO_UPDATE_RX_REO_QUEUE_STATUS = 153 /* 0x99 */,
HAL_TX_PEER_ENTRY = 154 /* 0x9a */,
HAL_TX_RAW_OR_NATIVE_FRAME_SETUP = 155 /* 0x9b */,
HAL_EXAMPLE_STRUCT_NAME = 156 /* 0x9c */,
HAL_PCU_PPDU_SETUP_END_INFO = 157 /* 0x9d */,
HAL_PPDU_RATE_SETTING = 158 /* 0x9e */,
HAL_PROT_RATE_SETTING = 159 /* 0x9f */,
HAL_RX_MPDU_DETAILS = 160 /* 0xa0 */,
HAL_EXAMPLE_USER_TLV_42 = 161 /* 0xa1 */,
HAL_RX_MSDU_LINK = 162 /* 0xa2 */,
HAL_RX_REO_QUEUE = 163 /* 0xa3 */,
HAL_ADDR_SEARCH_ENTRY = 164 /* 0xa4 */,
HAL_SCHEDULER_CMD = 165 /* 0xa5 */,
HAL_TX_FLUSH = 166 /* 0xa6 */,
HAL_TQM_ENTRANCE_RING = 167 /* 0xa7 */,
HAL_TX_DATA_WORD = 168 /* 0xa8 */,
HAL_TX_MPDU_DETAILS = 169 /* 0xa9 */,
HAL_TX_MPDU_LINK = 170 /* 0xaa */,
HAL_TX_MPDU_LINK_PTR = 171 /* 0xab */,
HAL_TX_MPDU_QUEUE_HEAD = 172 /* 0xac */,
HAL_TX_MPDU_QUEUE_EXT = 173 /* 0xad */,
HAL_TX_MPDU_QUEUE_EXT_PTR = 174 /* 0xae */,
HAL_TX_MSDU_DETAILS = 175 /* 0xaf */,
HAL_TX_MSDU_EXTENSION = 176 /* 0xb0 */,
HAL_TX_MSDU_FLOW = 177 /* 0xb1 */,
HAL_TX_MSDU_LINK = 178 /* 0xb2 */,
HAL_TX_MSDU_LINK_ENTRY_PTR = 179 /* 0xb3 */,
HAL_RESPONSE_RATE_SETTING = 180 /* 0xb4 */,
HAL_TXPCU_BUFFER_BASICS = 181 /* 0xb5 */,
HAL_UNIFORM_DESCRIPTOR_HEADER = 182 /* 0xb6 */,
HAL_UNIFORM_TQM_CMD_HEADER = 183 /* 0xb7 */,
HAL_UNIFORM_TQM_STATUS_HEADER = 184 /* 0xb8 */,
HAL_USER_RATE_SETTING = 185 /* 0xb9 */,
HAL_WBM_BUFFER_RING = 186 /* 0xba */,
HAL_WBM_LINK_DESCRIPTOR_RING = 187 /* 0xbb */,
HAL_WBM_RELEASE_RING = 188 /* 0xbc */,
HAL_TX_FLUSH_REQ = 189 /* 0xbd */,
HAL_RX_MSDU_DETAILS = 190 /* 0xbe */,
HAL_TQM_WRITE_CMD_STATUS = 191 /* 0xbf */,
HAL_TQM_GET_MPDU_QUEUE_STATS = 192 /* 0xc0 */,
HAL_TQM_GET_MSDU_FLOW_STATS = 193 /* 0xc1 */,
HAL_EXAMPLE_USER_CTLV_32 = 194 /* 0xc2 */,
HAL_TX_FES_STATUS_START = 195 /* 0xc3 */,
HAL_TX_FES_STATUS_USER_PPDU = 196 /* 0xc4 */,
HAL_TX_FES_STATUS_USER_RESPONSE = 197 /* 0xc5 */,
HAL_TX_FES_STATUS_END = 198 /* 0xc6 */,
HAL_RX_TRIG_INFO = 199 /* 0xc7 */,
HAL_RXPCU_TX_SETUP_CLEAR = 200 /* 0xc8 */,
HAL_RX_FRAME_BITMAP_REQ = 201 /* 0xc9 */,
HAL_RX_FRAME_BITMAP_ACK = 202 /* 0xca */,
HAL_COEX_RX_STATUS = 203 /* 0xcb */,
HAL_RX_START_PARAM = 204 /* 0xcc */,
HAL_RX_PPDU_START = 205 /* 0xcd */,
HAL_RX_PPDU_END = 206 /* 0xce */,
HAL_RX_MPDU_START = 207 /* 0xcf */,
HAL_RX_MPDU_END = 208 /* 0xd0 */,
HAL_RX_MSDU_START = 209 /* 0xd1 */,
HAL_RX_MSDU_END = 210 /* 0xd2 */,
HAL_RX_ATTENTION = 211 /* 0xd3 */,
HAL_RECEIVED_RESPONSE_INFO = 212 /* 0xd4 */,
HAL_RX_PHY_SLEEP = 213 /* 0xd5 */,
HAL_RX_HEADER = 214 /* 0xd6 */,
HAL_RX_PEER_ENTRY = 215 /* 0xd7 */,
HAL_RX_FLUSH = 216 /* 0xd8 */,
HAL_RX_RESPONSE_REQUIRED_INFO = 217 /* 0xd9 */,
HAL_RX_FRAMELESS_BAR_DETAILS = 218 /* 0xda */,
HAL_TQM_GET_MPDU_QUEUE_STATS_STATUS = 219 /* 0xdb */,
HAL_TQM_GET_MSDU_FLOW_STATS_STATUS = 220 /* 0xdc */,
HAL_TX_CBF_INFO = 221 /* 0xdd */,
HAL_PCU_PPDU_SETUP_USER = 222 /* 0xde */,
HAL_RX_MPDU_PCU_START = 223 /* 0xdf */,
HAL_RX_PM_INFO = 224 /* 0xe0 */,
HAL_RX_USER_PPDU_END = 225 /* 0xe1 */,
HAL_RX_PRE_PPDU_START = 226 /* 0xe2 */,
HAL_RX_PREAMBLE = 227 /* 0xe3 */,
HAL_TX_FES_SETUP_COMPLETE = 228 /* 0xe4 */,
HAL_TX_LAST_MPDU_FETCHED = 229 /* 0xe5 */,
HAL_TXDMA_STOP_REQUEST = 230 /* 0xe6 */,
HAL_RXPCU_SETUP = 231 /* 0xe7 */,
HAL_RXPCU_USER_SETUP = 232 /* 0xe8 */,
HAL_TX_FES_STATUS_ACK_OR_BA = 233 /* 0xe9 */,
HAL_TQM_ACKED_MPDU = 234 /* 0xea */,
HAL_COEX_TX_RESP = 235 /* 0xeb */,
HAL_COEX_TX_STATUS = 236 /* 0xec */,
HAL_MACTX_COEX_PHY_CTRL = 237 /* 0xed */,
HAL_COEX_STATUS_BROADCAST = 238 /* 0xee */,
HAL_RESPONSE_START_STATUS = 239 /* 0xef */,
HAL_RESPONSE_END_STATUS = 240 /* 0xf0 */,
HAL_CRYPTO_STATUS = 241 /* 0xf1 */,
HAL_RECEIVED_TRIGGER_INFO = 242 /* 0xf2 */,
HAL_REO_ENTRANCE_RING = 243 /* 0xf3 */,
HAL_RX_MPDU_LINK = 244 /* 0xf4 */,
HAL_COEX_TX_STOP_CTRL = 245 /* 0xf5 */,
HAL_RX_PPDU_ACK_REPORT = 246 /* 0xf6 */,
HAL_RX_PPDU_NO_ACK_REPORT = 247 /* 0xf7 */,
HAL_SCH_COEX_STATUS = 248 /* 0xf8 */,
HAL_SCHEDULER_COMMAND_STATUS = 249 /* 0xf9 */,
HAL_SCHEDULER_RX_PPDU_NO_RESPONSE_STATUS = 250 /* 0xfa */,
HAL_TX_FES_STATUS_PROT = 251 /* 0xfb */,
HAL_TX_FES_STATUS_START_PPDU = 252 /* 0xfc */,
HAL_TX_FES_STATUS_START_PROT = 253 /* 0xfd */,
HAL_TXPCU_PHYTX_DEBUG32 = 254 /* 0xfe */,
HAL_TXPCU_PHYTX_OTHER_TRANSMIT_INFO32 = 255 /* 0xff */,
HAL_TX_MPDU_COUNT_TRANSFER_END = 256 /* 0x100 */,
HAL_WHO_ANCHOR_OFFSET = 257 /* 0x101 */,
HAL_WHO_ANCHOR_VALUE = 258 /* 0x102 */,
HAL_WHO_CCE_INFO = 259 /* 0x103 */,
HAL_WHO_COMMIT = 260 /* 0x104 */,
HAL_WHO_COMMIT_DONE = 261 /* 0x105 */,
HAL_WHO_FLUSH = 262 /* 0x106 */,
HAL_WHO_L2_LLC = 263 /* 0x107 */,
HAL_WHO_L2_PAYLOAD = 264 /* 0x108 */,
HAL_WHO_L3_CHECKSUM = 265 /* 0x109 */,
HAL_WHO_L3_INFO = 266 /* 0x10a */,
HAL_WHO_L4_CHECKSUM = 267 /* 0x10b */,
HAL_WHO_L4_INFO = 268 /* 0x10c */,
HAL_WHO_MSDU = 269 /* 0x10d */,
HAL_WHO_MSDU_MISC = 270 /* 0x10e */,
HAL_WHO_PACKET_DATA = 271 /* 0x10f */,
HAL_WHO_PACKET_HDR = 272 /* 0x110 */,
HAL_WHO_PPDU_END = 273 /* 0x111 */,
HAL_WHO_PPDU_START = 274 /* 0x112 */,
HAL_WHO_TSO = 275 /* 0x113 */,
HAL_WHO_WMAC_HEADER_PV0 = 276 /* 0x114 */,
HAL_WHO_WMAC_HEADER_PV1 = 277 /* 0x115 */,
HAL_WHO_WMAC_IV = 278 /* 0x116 */,
HAL_MPDU_INFO_END = 279 /* 0x117 */,
HAL_MPDU_INFO_BITMAP = 280 /* 0x118 */,
HAL_TX_QUEUE_EXTENSION = 281 /* 0x119 */,
HAL_RX_PEER_ENTRY_DETAILS = 282 /* 0x11a */,
HAL_RX_REO_QUEUE_REFERENCE = 283 /* 0x11b */,
HAL_RX_REO_QUEUE_EXT = 284 /* 0x11c */,
HAL_SCHEDULER_SELFGEN_RESPONSE_STATUS = 285 /* 0x11d */,
HAL_TQM_UPDATE_TX_MPDU_COUNT_STATUS = 286 /* 0x11e */,
HAL_TQM_ACKED_MPDU_STATUS = 287 /* 0x11f */,
HAL_TQM_ADD_MSDU_STATUS = 288 /* 0x120 */,
HAL_RX_MPDU_LINK_PTR = 289 /* 0x121 */,
HAL_REO_DESTINATION_RING = 290 /* 0x122 */,
HAL_TQM_LIST_GEN_DONE = 291 /* 0x123 */,
HAL_WHO_TERMINATE = 292 /* 0x124 */,
HAL_TX_LAST_MPDU_END = 293 /* 0x125 */,
HAL_TX_CV_DATA = 294 /* 0x126 */,
HAL_TCL_ENTRANCE_FROM_PPE_RING = 295 /* 0x127 */,
HAL_PPDU_TX_END = 296 /* 0x128 */,
HAL_PROT_TX_END = 297 /* 0x129 */,
HAL_PDG_RESPONSE_RATE_SETTING = 298 /* 0x12a */,
HAL_MPDU_INFO_GLOBAL_END = 299 /* 0x12b */,
HAL_TQM_SCH_INSTR_GLOBAL_END = 300 /* 0x12c */,
HAL_RX_PPDU_END_USER_STATS = 301 /* 0x12d */,
HAL_RX_PPDU_END_USER_STATS_EXT = 302 /* 0x12e */,
HAL_NO_ACK_REPORT = 303 /* 0x12f */,
HAL_ACK_REPORT = 304 /* 0x130 */,
HAL_UNIFORM_REO_CMD_HEADER = 305 /* 0x131 */,
HAL_REO_GET_QUEUE_STATS = 306 /* 0x132 */,
HAL_REO_FLUSH_QUEUE = 307 /* 0x133 */,
HAL_REO_FLUSH_CACHE = 308 /* 0x134 */,
HAL_REO_UNBLOCK_CACHE = 309 /* 0x135 */,
HAL_UNIFORM_REO_STATUS_HEADER = 310 /* 0x136 */,
HAL_REO_GET_QUEUE_STATS_STATUS = 311 /* 0x137 */,
HAL_REO_FLUSH_QUEUE_STATUS = 312 /* 0x138 */,
HAL_REO_FLUSH_CACHE_STATUS = 313 /* 0x139 */,
HAL_REO_UNBLOCK_CACHE_STATUS = 314 /* 0x13a */,
HAL_TQM_FLUSH_CACHE = 315 /* 0x13b */,
HAL_TQM_UNBLOCK_CACHE = 316 /* 0x13c */,
HAL_TQM_FLUSH_CACHE_STATUS = 317 /* 0x13d */,
HAL_TQM_UNBLOCK_CACHE_STATUS = 318 /* 0x13e */,
HAL_RX_PPDU_END_STATUS_DONE = 319 /* 0x13f */,
HAL_RX_STATUS_BUFFER_DONE = 320 /* 0x140 */,
HAL_BUFFER_ADDR_INFO = 321 /* 0x141 */,
HAL_RX_MSDU_DESC_INFO = 322 /* 0x142 */,
HAL_RX_MPDU_DESC_INFO = 323 /* 0x143 */,
HAL_TCL_DATA_CMD = 324 /* 0x144 */,
HAL_TCL_GSE_CMD = 325 /* 0x145 */,
HAL_TCL_EXIT_BASE = 326 /* 0x146 */,
HAL_TCL_COMPACT_EXIT_RING = 327 /* 0x147 */,
HAL_TCL_REGULAR_EXIT_RING = 328 /* 0x148 */,
HAL_TCL_EXTENDED_EXIT_RING = 329 /* 0x149 */,
HAL_UPLINK_COMMON_INFO = 330 /* 0x14a */,
HAL_UPLINK_USER_SETUP_INFO = 331 /* 0x14b */,
HAL_TX_DATA_SYNC = 332 /* 0x14c */,
HAL_PHYRX_CBF_READ_REQUEST_ACK = 333 /* 0x14d */,
HAL_TCL_STATUS_RING = 334 /* 0x14e */,
HAL_TQM_GET_MPDU_HEAD_INFO = 335 /* 0x14f */,
HAL_TQM_SYNC_CMD = 336 /* 0x150 */,
HAL_TQM_GET_MPDU_HEAD_INFO_STATUS = 337 /* 0x151 */,
HAL_TQM_SYNC_CMD_STATUS = 338 /* 0x152 */,
HAL_TQM_THRESHOLD_DROP_NOTIFICATION_STATUS = 339 /* 0x153 */,
HAL_TQM_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 340 /* 0x154 */,
HAL_REO_FLUSH_TIMEOUT_LIST = 341 /* 0x155 */,
HAL_REO_FLUSH_TIMEOUT_LIST_STATUS = 342 /* 0x156 */,
HAL_REO_TO_PPE_RING = 343 /* 0x157 */,
HAL_RX_MPDU_INFO = 344 /* 0x158 */,
HAL_REO_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 345 /* 0x159 */,
HAL_SCHEDULER_RX_SIFS_RESPONSE_TRIGGER_STATUS = 346 /* 0x15a */,
HAL_EXAMPLE_USER_TLV_32_NAME = 347 /* 0x15b */,
HAL_RX_PPDU_START_USER_INFO = 348 /* 0x15c */,
HAL_RX_RXPCU_CLASSIFICATION_OVERVIEW = 349 /* 0x15d */,
HAL_RX_RING_MASK = 350 /* 0x15e */,
HAL_WHO_CLASSIFY_INFO = 351 /* 0x15f */,
HAL_TXPT_CLASSIFY_INFO = 352 /* 0x160 */,
HAL_RXPT_CLASSIFY_INFO = 353 /* 0x161 */,
HAL_TX_FLOW_SEARCH_ENTRY = 354 /* 0x162 */,
HAL_RX_FLOW_SEARCH_ENTRY = 355 /* 0x163 */,
HAL_RECEIVED_TRIGGER_INFO_DETAILS = 356 /* 0x164 */,
HAL_COEX_MAC_NAP = 357 /* 0x165 */,
HAL_MACRX_ABORT_REQUEST_INFO = 358 /* 0x166 */,
HAL_MACTX_ABORT_REQUEST_INFO = 359 /* 0x167 */,
HAL_PHYRX_ABORT_REQUEST_INFO = 360 /* 0x168 */,
HAL_PHYTX_ABORT_REQUEST_INFO = 361 /* 0x169 */,
HAL_RXPCU_PPDU_END_INFO = 362 /* 0x16a */,
HAL_WHO_MESH_CONTROL = 363 /* 0x16b */,
HAL_L_SIG_A_INFO = 364 /* 0x16c */,
HAL_L_SIG_B_INFO = 365 /* 0x16d */,
HAL_HT_SIG_INFO = 366 /* 0x16e */,
HAL_VHT_SIG_A_INFO = 367 /* 0x16f */,
HAL_VHT_SIG_B_SU20_INFO = 368 /* 0x170 */,
HAL_VHT_SIG_B_SU40_INFO = 369 /* 0x171 */,
HAL_VHT_SIG_B_SU80_INFO = 370 /* 0x172 */,
HAL_VHT_SIG_B_SU160_INFO = 371 /* 0x173 */,
HAL_VHT_SIG_B_MU20_INFO = 372 /* 0x174 */,
HAL_VHT_SIG_B_MU40_INFO = 373 /* 0x175 */,
HAL_VHT_SIG_B_MU80_INFO = 374 /* 0x176 */,
HAL_VHT_SIG_B_MU160_INFO = 375 /* 0x177 */,
HAL_SERVICE_INFO = 376 /* 0x178 */,
HAL_HE_SIG_A_SU_INFO = 377 /* 0x179 */,
HAL_HE_SIG_A_MU_DL_INFO = 378 /* 0x17a */,
HAL_HE_SIG_A_MU_UL_INFO = 379 /* 0x17b */,
HAL_HE_SIG_B1_MU_INFO = 380 /* 0x17c */,
HAL_HE_SIG_B2_MU_INFO = 381 /* 0x17d */,
HAL_HE_SIG_B2_OFDMA_INFO = 382 /* 0x17e */,
HAL_PDG_SW_MODE_BW_START = 383 /* 0x17f */,
HAL_PDG_SW_MODE_BW_END = 384 /* 0x180 */,
HAL_PDG_WAIT_FOR_MAC_REQUEST = 385 /* 0x181 */,
HAL_PDG_WAIT_FOR_PHY_REQUEST = 386 /* 0x182 */,
HAL_SCHEDULER_END = 387 /* 0x183 */,
HAL_PEER_TABLE_ENTRY = 388 /* 0x184 */,
HAL_SW_PEER_INFO = 389 /* 0x185 */,
HAL_RXOLE_CCE_CLASSIFY_INFO = 390 /* 0x186 */,
HAL_TCL_CCE_CLASSIFY_INFO = 391 /* 0x187 */,
HAL_RXOLE_CCE_INFO = 392 /* 0x188 */,
HAL_TCL_CCE_INFO = 393 /* 0x189 */,
HAL_TCL_CCE_SUPERRULE = 394 /* 0x18a */,
HAL_CCE_RULE = 395 /* 0x18b */,
HAL_RX_PPDU_START_DROPPED = 396 /* 0x18c */,
HAL_RX_PPDU_END_DROPPED = 397 /* 0x18d */,
HAL_RX_PPDU_END_STATUS_DONE_DROPPED = 398 /* 0x18e */,
HAL_RX_MPDU_START_DROPPED = 399 /* 0x18f */,
HAL_RX_MSDU_START_DROPPED = 400 /* 0x190 */,
HAL_RX_MSDU_END_DROPPED = 401 /* 0x191 */,
HAL_RX_MPDU_END_DROPPED = 402 /* 0x192 */,
HAL_RX_ATTENTION_DROPPED = 403 /* 0x193 */,
HAL_TXPCU_USER_SETUP = 404 /* 0x194 */,
HAL_RXPCU_USER_SETUP_EXT = 405 /* 0x195 */,
HAL_CE_SRC_DESC = 406 /* 0x196 */,
HAL_CE_STAT_DESC = 407 /* 0x197 */,
HAL_RXOLE_CCE_SUPERRULE = 408 /* 0x198 */,
HAL_TX_RATE_STATS_INFO = 409 /* 0x199 */,
HAL_CMD_PART_0_END = 410 /* 0x19a */,
HAL_MACTX_SYNTH_ON = 411 /* 0x19b */,
HAL_SCH_CRITICAL_TLV_REFERENCE = 412 /* 0x19c */,
HAL_TQM_MPDU_GLOBAL_START = 413 /* 0x19d */,
HAL_EXAMPLE_TLV_32 = 414 /* 0x19e */,
HAL_TQM_UPDATE_TX_MSDU_FLOW = 415 /* 0x19f */,
HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD = 416 /* 0x1a0 */,
HAL_TQM_UPDATE_TX_MSDU_FLOW_STATUS = 417 /* 0x1a1 */,
HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD_STATUS = 418 /* 0x1a2 */,
HAL_REO_UPDATE_RX_REO_QUEUE = 419 /* 0x1a3 */,
HAL_CE_DST_DESC = 420 /* 0x1a4 */,
HAL_TLV_BASE = 511 /* 0x1ff */,
};
#define HAL_TLV_HDR_TAG GENMASK(9, 1)
#define HAL_TLV_HDR_LEN GENMASK(25, 10)
#define HAL_TLV_ALIGN 4
struct hal_tlv_hdr {
u32 tl;
u8 value[];
} __packed;
#define RX_MPDU_DESC_INFO0_MSDU_COUNT GENMASK(7, 0)
#define RX_MPDU_DESC_INFO0_SEQ_NUM GENMASK(19, 8)
#define RX_MPDU_DESC_INFO0_FRAG_FLAG BIT(20)
#define RX_MPDU_DESC_INFO0_MPDU_RETRY BIT(21)
#define RX_MPDU_DESC_INFO0_AMPDU_FLAG BIT(22)
#define RX_MPDU_DESC_INFO0_BAR_FRAME BIT(23)
#define RX_MPDU_DESC_INFO0_VALID_PN BIT(24)
#define RX_MPDU_DESC_INFO0_VALID_SA BIT(25)
#define RX_MPDU_DESC_INFO0_SA_IDX_TIMEOUT BIT(26)
#define RX_MPDU_DESC_INFO0_VALID_DA BIT(27)
#define RX_MPDU_DESC_INFO0_DA_MCBC BIT(28)
#define RX_MPDU_DESC_INFO0_DA_IDX_TIMEOUT BIT(29)
#define RX_MPDU_DESC_INFO0_RAW_MPDU BIT(30)
#define RX_MPDU_DESC_META_DATA_PEER_ID GENMASK(15, 0)
struct rx_mpdu_desc {
u32 info0; /* %RX_MPDU_DESC_INFO */
u32 meta_data;
} __packed;
/* rx_mpdu_desc
* Producer: RXDMA
* Consumer: REO/SW/FW
*
* msdu_count
* The number of MSDUs within the MPDU
*
* mpdu_sequence_number
* The field can have two different meanings based on the setting
* of field 'bar_frame'. If 'bar_frame' is set, it means the MPDU
* start sequence number from the BAR frame otherwise it means
* the MPDU sequence number of the received frame.
*
* fragment_flag
* When set, this MPDU is a fragment and REO should forward this
* fragment MPDU to the REO destination ring without any reorder
* checks, pn checks or bitmap update. This implies that REO is
* forwarding the pointer to the MSDU link descriptor.
*
* mpdu_retry_bit
* The retry bit setting from the MPDU header of the received frame
*
* ampdu_flag
* Indicates the MPDU was received as part of an A-MPDU.
*
* bar_frame
* Indicates the received frame is a BAR frame. After processing,
* this frame shall be pushed to SW or deleted.
*
* valid_pn
* When not set, REO will not perform a PN sequence number check.
*
* valid_sa
* Indicates OLE found a valid SA entry for all MSDUs in this MPDU.
*
* sa_idx_timeout
* Indicates, at least 1 MSDU within the MPDU has an unsuccessful
* MAC source address search due to the expiration of search timer.
*
* valid_da
* When set, OLE found a valid DA entry for all MSDUs in this MPDU.
*
* da_mcbc
* Field Only valid if valid_da is set. Indicates at least one of
* the DA addresses is a Multicast or Broadcast address.
*
* da_idx_timeout
* Indicates, at least 1 MSDU within the MPDU has an unsuccessful
* MAC destination address search due to the expiration of search
* timer.
*
* raw_mpdu
* Field only valid when first_msdu_in_mpdu_flag is set. Indicates
* the contents in the MSDU buffer contains a 'RAW' MPDU.
*/
enum hal_rx_msdu_desc_reo_dest_ind {
HAL_RX_MSDU_DESC_REO_DEST_IND_TCL,
HAL_RX_MSDU_DESC_REO_DEST_IND_SW1,
HAL_RX_MSDU_DESC_REO_DEST_IND_SW2,
HAL_RX_MSDU_DESC_REO_DEST_IND_SW3,
HAL_RX_MSDU_DESC_REO_DEST_IND_SW4,
HAL_RX_MSDU_DESC_REO_DEST_IND_RELEASE,
HAL_RX_MSDU_DESC_REO_DEST_IND_FW,
};
#define RX_MSDU_DESC_INFO0_FIRST_MSDU_IN_MPDU BIT(0)
#define RX_MSDU_DESC_INFO0_LAST_MSDU_IN_MPDU BIT(1)
#define RX_MSDU_DESC_INFO0_MSDU_CONTINUATION BIT(2)
#define RX_MSDU_DESC_INFO0_MSDU_LENGTH GENMASK(16, 3)
#define RX_MSDU_DESC_INFO0_REO_DEST_IND GENMASK(21, 17)
#define RX_MSDU_DESC_INFO0_MSDU_DROP BIT(22)
#define RX_MSDU_DESC_INFO0_VALID_SA BIT(23)
#define RX_MSDU_DESC_INFO0_SA_IDX_TIMEOUT BIT(24)
#define RX_MSDU_DESC_INFO0_VALID_DA BIT(25)
#define RX_MSDU_DESC_INFO0_DA_MCBC BIT(26)
#define RX_MSDU_DESC_INFO0_DA_IDX_TIMEOUT BIT(27)
#define HAL_RX_MSDU_PKT_LENGTH_GET(val) \
(FIELD_GET(RX_MSDU_DESC_INFO0_MSDU_LENGTH, (val)))
struct rx_msdu_desc {
u32 info0;
u32 rsvd0;
} __packed;
/* rx_msdu_desc
*
* first_msdu_in_mpdu
* Indicates first msdu in mpdu.
*
* last_msdu_in_mpdu
* Indicates last msdu in mpdu. This flag can be true only when
* 'Msdu_continuation' set to 0. This implies that when an msdu
* is spread out over multiple buffers and thus msdu_continuation
* is set, only for the very last buffer of the msdu, can the
* 'last_msdu_in_mpdu' be set.
*
* When both first_msdu_in_mpdu and last_msdu_in_mpdu are set,
* the MPDU that this MSDU belongs to only contains a single MSDU.
*
* msdu_continuation
* When set, this MSDU buffer was not able to hold the entire MSDU.
* The next buffer will therefor contain additional information
* related to this MSDU.
*
* msdu_length
* Field is only valid in combination with the 'first_msdu_in_mpdu'
* being set. Full MSDU length in bytes after decapsulation. This
* field is still valid for MPDU frames without A-MSDU. It still
* represents MSDU length after decapsulation Or in case of RAW
* MPDUs, it indicates the length of the entire MPDU (without FCS
* field).
*
* reo_destination_indication
* The id of the reo exit ring where the msdu frame shall push
* after (MPDU level) reordering has finished. Values are defined
* in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_.
*
* msdu_drop
* Indicates that REO shall drop this MSDU and not forward it to
* any other ring.
*
* valid_sa
* Indicates OLE found a valid SA entry for this MSDU.
*
* sa_idx_timeout
* Indicates, an unsuccessful MAC source address search due to
* the expiration of search timer for this MSDU.
*
* valid_da
* When set, OLE found a valid DA entry for this MSDU.
*
* da_mcbc
* Field Only valid if valid_da is set. Indicates the DA address
* is a Multicast or Broadcast address for this MSDU.
*
* da_idx_timeout
* Indicates, an unsuccessful MAC destination address search due
* to the expiration of search timer fot this MSDU.
*/
enum hal_reo_dest_ring_buffer_type {
HAL_REO_DEST_RING_BUFFER_TYPE_MSDU,
HAL_REO_DEST_RING_BUFFER_TYPE_LINK_DESC,
};
enum hal_reo_dest_ring_push_reason {
HAL_REO_DEST_RING_PUSH_REASON_ERR_DETECTED,
HAL_REO_DEST_RING_PUSH_REASON_ROUTING_INSTRUCTION,
};
enum hal_reo_dest_ring_error_code {
HAL_REO_DEST_RING_ERROR_CODE_DESC_ADDR_ZERO,
HAL_REO_DEST_RING_ERROR_CODE_DESC_INVALID,
HAL_REO_DEST_RING_ERROR_CODE_AMPDU_IN_NON_BA,
HAL_REO_DEST_RING_ERROR_CODE_NON_BA_DUPLICATE,
HAL_REO_DEST_RING_ERROR_CODE_BA_DUPLICATE,
HAL_REO_DEST_RING_ERROR_CODE_FRAME_2K_JUMP,
HAL_REO_DEST_RING_ERROR_CODE_BAR_2K_JUMP,
HAL_REO_DEST_RING_ERROR_CODE_FRAME_OOR,
HAL_REO_DEST_RING_ERROR_CODE_BAR_OOR,
HAL_REO_DEST_RING_ERROR_CODE_NO_BA_SESSION,
HAL_REO_DEST_RING_ERROR_CODE_FRAME_SN_EQUALS_SSN,
HAL_REO_DEST_RING_ERROR_CODE_PN_CHECK_FAILED,
HAL_REO_DEST_RING_ERROR_CODE_2K_ERR_FLAG_SET,
HAL_REO_DEST_RING_ERROR_CODE_PN_ERR_FLAG_SET,
HAL_REO_DEST_RING_ERROR_CODE_DESC_BLOCKED,
HAL_REO_DEST_RING_ERROR_CODE_MAX,
};
#define HAL_REO_DEST_RING_INFO0_QUEUE_ADDR_HI GENMASK(7, 0)
#define HAL_REO_DEST_RING_INFO0_BUFFER_TYPE BIT(8)
#define HAL_REO_DEST_RING_INFO0_PUSH_REASON GENMASK(10, 9)
#define HAL_REO_DEST_RING_INFO0_ERROR_CODE GENMASK(15, 11)
#define HAL_REO_DEST_RING_INFO0_RX_QUEUE_NUM GENMASK(31, 16)
#define HAL_REO_DEST_RING_INFO1_REORDER_INFO_VALID BIT(0)
#define HAL_REO_DEST_RING_INFO1_REORDER_OPCODE GENMASK(4, 1)
#define HAL_REO_DEST_RING_INFO1_REORDER_SLOT_IDX GENMASK(12, 5)
#define HAL_REO_DEST_RING_INFO2_RING_ID GENMASK(27, 20)
#define HAL_REO_DEST_RING_INFO2_LOOPING_COUNT GENMASK(31, 28)
struct hal_reo_dest_ring {
struct ath11k_buffer_addr buf_addr_info;
struct rx_mpdu_desc rx_mpdu_info;
struct rx_msdu_desc rx_msdu_info;
u32 queue_addr_lo;
u32 info0; /* %HAL_REO_DEST_RING_INFO0_ */
u32 info1; /* %HAL_REO_DEST_RING_INFO1_ */
u32 rsvd0;
u32 rsvd1;
u32 rsvd2;
u32 rsvd3;
u32 rsvd4;
u32 rsvd5;
u32 info2; /* %HAL_REO_DEST_RING_INFO2_ */
} __packed;
/* hal_reo_dest_ring
*
* Producer: RXDMA
* Consumer: REO/SW/FW
*
* buf_addr_info
* Details of the physical address of a buffer or MSDU
* link descriptor.
*
* rx_mpdu_info
* General information related to the MPDU that is passed
* on from REO entrance ring to the REO destination ring.
*
* rx_msdu_info
* General information related to the MSDU that is passed
* on from RXDMA all the way to the REO destination ring.
*
* queue_addr_lo
* Address (lower 32 bits) of the REO queue descriptor.
*
* queue_addr_hi
* Address (upper 8 bits) of the REO queue descriptor.
*
* buffer_type
* Indicates the type of address provided in the buf_addr_info.
* Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_.
*
* push_reason
* Reason for pushing this frame to this exit ring. Values are
* defined in enum %HAL_REO_DEST_RING_PUSH_REASON_.
*
* error_code
* Valid only when 'push_reason' is set. All error codes are
* defined in enum %HAL_REO_DEST_RING_ERROR_CODE_.
*
* rx_queue_num
* Indicates the REO MPDU reorder queue id from which this frame
* originated.
*
* reorder_info_valid
* When set, REO has been instructed to not perform the actual
* re-ordering of frames for this queue, but just to insert
* the reorder opcodes.
*
* reorder_opcode
* Field is valid when 'reorder_info_valid' is set. This field is
* always valid for debug purpose as well.
*
* reorder_slot_idx
* Valid only when 'reorder_info_valid' is set.
*
* ring_id
* The buffer pointer ring id.
* 0 - Idle ring
* 1 - N refers to other rings.
*
* looping_count
* Indicates the number of times the producer of entries into
* this ring has looped around the ring.
*/
enum hal_reo_entr_rxdma_ecode {
HAL_REO_ENTR_RING_RXDMA_ECODE_OVERFLOW_ERR,
HAL_REO_ENTR_RING_RXDMA_ECODE_MPDU_LEN_ERR,
HAL_REO_ENTR_RING_RXDMA_ECODE_FCS_ERR,
HAL_REO_ENTR_RING_RXDMA_ECODE_DECRYPT_ERR,
HAL_REO_ENTR_RING_RXDMA_ECODE_TKIP_MIC_ERR,
HAL_REO_ENTR_RING_RXDMA_ECODE_UNECRYPTED_ERR,
HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LEN_ERR,
HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LIMIT_ERR,
HAL_REO_ENTR_RING_RXDMA_ECODE_WIFI_PARSE_ERR,
HAL_REO_ENTR_RING_RXDMA_ECODE_AMSDU_PARSE_ERR,
HAL_REO_ENTR_RING_RXDMA_ECODE_SA_TIMEOUT_ERR,
HAL_REO_ENTR_RING_RXDMA_ECODE_DA_TIMEOUT_ERR,
HAL_REO_ENTR_RING_RXDMA_ECODE_FLOW_TIMEOUT_ERR,
HAL_REO_ENTR_RING_RXDMA_ECODE_FLUSH_REQUEST_ERR,
HAL_REO_ENTR_RING_RXDMA_ECODE_MAX,
};
#define HAL_REO_ENTR_RING_INFO0_QUEUE_ADDR_HI GENMASK(7, 0)
#define HAL_REO_ENTR_RING_INFO0_MPDU_BYTE_COUNT GENMASK(21, 8)
#define HAL_REO_ENTR_RING_INFO0_DEST_IND GENMASK(26, 22)
#define HAL_REO_ENTR_RING_INFO0_FRAMELESS_BAR BIT(27)
#define HAL_REO_ENTR_RING_INFO1_RXDMA_PUSH_REASON GENMASK(1, 0)
#define HAL_REO_ENTR_RING_INFO1_RXDMA_ERROR_CODE GENMASK(6, 2)
struct hal_reo_entrance_ring {
struct ath11k_buffer_addr buf_addr_info;
struct rx_mpdu_desc rx_mpdu_info;
u32 queue_addr_lo;
u32 info0; /* %HAL_REO_ENTR_RING_INFO0_ */
u32 info1; /* %HAL_REO_ENTR_RING_INFO1_ */
u32 info2; /* %HAL_REO_DEST_RING_INFO2_ */
} __packed;
/* hal_reo_entrance_ring
*
* Producer: RXDMA
* Consumer: REO
*
* buf_addr_info
* Details of the physical address of a buffer or MSDU
* link descriptor.
*
* rx_mpdu_info
* General information related to the MPDU that is passed
* on from REO entrance ring to the REO destination ring.
*
* queue_addr_lo
* Address (lower 32 bits) of the REO queue descriptor.
*
* queue_addr_hi
* Address (upper 8 bits) of the REO queue descriptor.
*
* mpdu_byte_count
* An approximation of the number of bytes received in this MPDU.
* Used to keeps stats on the amount of data flowing
* through a queue.
*
* reo_destination_indication
* The id of the reo exit ring where the msdu frame shall push
* after (MPDU level) reordering has finished. Values are defined
* in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_.
*
* frameless_bar
* Indicates that this REO entrance ring struct contains BAR info
* from a multi TID BAR frame. The original multi TID BAR frame
* itself contained all the REO info for the first TID, but all
* the subsequent TID info and their linkage to the REO descriptors
* is passed down as 'frameless' BAR info.
*
* The only fields valid in this descriptor when this bit is set
* are queue_addr_lo, queue_addr_hi, mpdu_sequence_number,
* bar_frame and peer_meta_data.
*
* rxdma_push_reason
* Reason for pushing this frame to this exit ring. Values are
* defined in enum %HAL_REO_DEST_RING_PUSH_REASON_.
*
* rxdma_error_code
* Valid only when 'push_reason' is set. All error codes are
* defined in enum %HAL_REO_ENTR_RING_RXDMA_ECODE_.
*
* ring_id
* The buffer pointer ring id.
* 0 - Idle ring
* 1 - N refers to other rings.
*
* looping_count
* Indicates the number of times the producer of entries into
* this ring has looped around the ring.
*/
#define HAL_REO_CMD_HDR_INFO0_CMD_NUMBER GENMASK(15, 0)
#define HAL_REO_CMD_HDR_INFO0_STATUS_REQUIRED BIT(16)
struct hal_reo_cmd_hdr {
u32 info0;
} __packed;
#define HAL_REO_GET_QUEUE_STATS_INFO0_QUEUE_ADDR_HI GENMASK(7, 0)
#define HAL_REO_GET_QUEUE_STATS_INFO0_CLEAR_STATS BIT(8)
struct hal_reo_get_queue_stats {
struct hal_reo_cmd_hdr cmd;
u32 queue_addr_lo;
u32 info0;
u32 rsvd0[6];
} __packed;
/* hal_reo_get_queue_stats
* Producer: SW
* Consumer: REO
*
* cmd
* Details for command execution tracking purposes.
*
* queue_addr_lo
* Address (lower 32 bits) of the REO queue descriptor.
*
* queue_addr_hi
* Address (upper 8 bits) of the REO queue descriptor.
*
* clear_stats
* Clear stats settings. When set, Clear the stats after
* generating the status.
*
* Following stats will be cleared.
* Timeout_count
* Forward_due_to_bar_count
* Duplicate_count
* Frames_in_order_count
* BAR_received_count
* MPDU_Frames_processed_count
* MSDU_Frames_processed_count
* Total_processed_byte_count
* Late_receive_MPDU_count
* window_jump_2k
* Hole_count
*/
#define HAL_REO_FLUSH_QUEUE_INFO0_DESC_ADDR_HI GENMASK(7, 0)
#define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_DESC_ADDR BIT(8)
#define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_RESRC_IDX GENMASK(10, 9)
struct hal_reo_flush_queue {
struct hal_reo_cmd_hdr cmd;
u32 desc_addr_lo;
u32 info0;
u32 rsvd0[6];
} __packed;
#define HAL_REO_FLUSH_CACHE_INFO0_CACHE_ADDR_HI GENMASK(7, 0)
#define HAL_REO_FLUSH_CACHE_INFO0_FWD_ALL_MPDUS BIT(8)
#define HAL_REO_FLUSH_CACHE_INFO0_RELEASE_BLOCK_IDX BIT(9)
#define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_RESRC_IDX GENMASK(11, 10)
#define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_WO_INVALIDATE BIT(12)
#define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_CACHE_USAGE BIT(13)
#define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_ALL BIT(14)
struct hal_reo_flush_cache {
struct hal_reo_cmd_hdr cmd;
u32 cache_addr_lo;
u32 info0;
u32 rsvd0[6];
} __packed;
#define HAL_TCL_DATA_CMD_INFO0_DESC_TYPE BIT(0)
#define HAL_TCL_DATA_CMD_INFO0_EPD BIT(1)
#define HAL_TCL_DATA_CMD_INFO0_ENCAP_TYPE GENMASK(3, 2)
#define HAL_TCL_DATA_CMD_INFO0_ENCRYPT_TYPE GENMASK(7, 4)
#define HAL_TCL_DATA_CMD_INFO0_SRC_BUF_SWAP BIT(8)
#define HAL_TCL_DATA_CMD_INFO0_LNK_META_SWAP BIT(9)
#define HAL_TCL_DATA_CMD_INFO0_SEARCH_TYPE GENMASK(13, 12)
#define HAL_TCL_DATA_CMD_INFO0_ADDR_EN GENMASK(15, 14)
#define HAL_TCL_DATA_CMD_INFO0_CMD_NUM GENMASK(31, 16)
#define HAL_TCL_DATA_CMD_INFO1_DATA_LEN GENMASK(15, 0)
#define HAL_TCL_DATA_CMD_INFO1_IP4_CKSUM_EN BIT(16)
#define HAL_TCL_DATA_CMD_INFO1_UDP4_CKSUM_EN BIT(17)
#define HAL_TCL_DATA_CMD_INFO1_UDP6_CKSUM_EN BIT(18)
#define HAL_TCL_DATA_CMD_INFO1_TCP4_CKSUM_EN BIT(19)
#define HAL_TCL_DATA_CMD_INFO1_TCP6_CKSUM_EN BIT(20)
#define HAL_TCL_DATA_CMD_INFO1_TO_FW BIT(21)
#define HAL_TCL_DATA_CMD_INFO1_PKT_OFFSET GENMASK(31, 23)
#define HAL_TCL_DATA_CMD_INFO2_BUF_TIMESTAMP GENMASK(18, 0)
#define HAL_TCL_DATA_CMD_INFO2_BUF_T_VALID BIT(19)
#define HAL_IPQ8074_TCL_DATA_CMD_INFO2_MESH_ENABLE BIT(20)
#define HAL_TCL_DATA_CMD_INFO2_TID_OVERWRITE BIT(21)
#define HAL_TCL_DATA_CMD_INFO2_TID GENMASK(25, 22)
#define HAL_TCL_DATA_CMD_INFO2_LMAC_ID GENMASK(27, 26)
#define HAL_TCL_DATA_CMD_INFO3_DSCP_TID_TABLE_IDX GENMASK(5, 0)
#define HAL_TCL_DATA_CMD_INFO3_SEARCH_INDEX GENMASK(25, 6)
#define HAL_TCL_DATA_CMD_INFO3_CACHE_SET_NUM GENMASK(29, 26)
#define HAL_QCN9074_TCL_DATA_CMD_INFO3_MESH_ENABLE GENMASK(31, 30)
#define HAL_TCL_DATA_CMD_INFO4_RING_ID GENMASK(27, 20)
#define HAL_TCL_DATA_CMD_INFO4_LOOPING_COUNT GENMASK(31, 28)
enum hal_encrypt_type {
HAL_ENCRYPT_TYPE_WEP_40,
HAL_ENCRYPT_TYPE_WEP_104,
HAL_ENCRYPT_TYPE_TKIP_NO_MIC,
HAL_ENCRYPT_TYPE_WEP_128,
HAL_ENCRYPT_TYPE_TKIP_MIC,
HAL_ENCRYPT_TYPE_WAPI,
HAL_ENCRYPT_TYPE_CCMP_128,
HAL_ENCRYPT_TYPE_OPEN,
HAL_ENCRYPT_TYPE_CCMP_256,
HAL_ENCRYPT_TYPE_GCMP_128,
HAL_ENCRYPT_TYPE_AES_GCMP_256,
HAL_ENCRYPT_TYPE_WAPI_GCM_SM4,
};
enum hal_tcl_encap_type {
HAL_TCL_ENCAP_TYPE_RAW,
HAL_TCL_ENCAP_TYPE_NATIVE_WIFI,
HAL_TCL_ENCAP_TYPE_ETHERNET,
HAL_TCL_ENCAP_TYPE_802_3 = 3,
};
enum hal_tcl_desc_type {
HAL_TCL_DESC_TYPE_BUFFER,
HAL_TCL_DESC_TYPE_EXT_DESC,
};
enum hal_wbm_htt_tx_comp_status {
HAL_WBM_REL_HTT_TX_COMP_STATUS_OK,
HAL_WBM_REL_HTT_TX_COMP_STATUS_DROP,
HAL_WBM_REL_HTT_TX_COMP_STATUS_TTL,
HAL_WBM_REL_HTT_TX_COMP_STATUS_REINJ,
HAL_WBM_REL_HTT_TX_COMP_STATUS_INSPECT,
HAL_WBM_REL_HTT_TX_COMP_STATUS_MEC_NOTIFY,
};
struct hal_tcl_data_cmd {
struct ath11k_buffer_addr buf_addr_info;
u32 info0;
u32 info1;
u32 info2;
u32 info3;
u32 info4;
} __packed;
/* hal_tcl_data_cmd
*
* buf_addr_info
* Details of the physical address of a buffer or MSDU
* link descriptor.
*
* desc_type
* Indicates the type of address provided in the buf_addr_info.
* Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_.
*
* epd
* When this bit is set then input packet is an EPD type.
*
* encap_type
* Indicates the encapsulation that HW will perform. Values are
* defined in enum %HAL_TCL_ENCAP_TYPE_.
*
* encrypt_type
* Field only valid for encap_type: RAW
* Values are defined in enum %HAL_ENCRYPT_TYPE_.
*
* src_buffer_swap
* Treats source memory (packet buffer) organization as big-endian.
* 1'b0: Source memory is little endian
* 1'b1: Source memory is big endian
*
* link_meta_swap
* Treats link descriptor and Metadata as big-endian.
* 1'b0: memory is little endian
* 1'b1: memory is big endian
*
* search_type
* Search type select
* 0 - Normal search, 1 - Index based address search,
* 2 - Index based flow search
*
* addrx_en
* addry_en
* Address X/Y search enable in ASE correspondingly.
* 1'b0: Search disable
* 1'b1: Search Enable
*
* cmd_num
* This number can be used to match against status.
*
* data_length
* MSDU length in case of direct descriptor. Length of link
* extension descriptor in case of Link extension descriptor.
*
* *_checksum_en
* Enable checksum replacement for ipv4, udp_over_ipv4, ipv6,
* udp_over_ipv6, tcp_over_ipv4 and tcp_over_ipv6.
*
* to_fw
* Forward packet to FW along with classification result. The
* packet will not be forward to TQM when this bit is set.
* 1'b0: Use classification result to forward the packet.
* 1'b1: Override classification result & forward packet only to fw
*
* packet_offset
* Packet offset from Metadata in case of direct buffer descriptor.
*
* buffer_timestamp
* buffer_timestamp_valid
* Frame system entrance timestamp. It shall be filled by first
* module (SW, TCL or TQM) that sees the frames first.
*
* mesh_enable
* For raw WiFi frames, this indicates transmission to a mesh STA,
* enabling the interpretation of the 'Mesh Control Present' bit
* (bit 8) of QoS Control.
* For native WiFi frames, this indicates that a 'Mesh Control'
* field is present between the header and the LLC.
*
* hlos_tid_overwrite
*
* When set, TCL shall ignore the IP DSCP and VLAN PCP
* fields and use HLOS_TID as the final TID. Otherwise TCL
* shall consider the DSCP and PCP fields as well as HLOS_TID
* and choose a final TID based on the configured priority
*
* hlos_tid
* HLOS MSDU priority
* Field is used when HLOS_TID_overwrite is set.
*
* lmac_id
* TCL uses this LMAC_ID in address search, i.e, while
* finding matching entry for the packet in AST corresponding
* to given LMAC_ID
*
* If LMAC ID is all 1s (=> value 3), it indicates wildcard
* match for any MAC
*
* dscp_tid_table_num
* DSCP to TID mapping table number that need to be used
* for the MSDU.
*
* search_index
* The index that will be used for index based address or
* flow search. The field is valid when 'search_type' is 1 or 2.
*
* cache_set_num
*
* Cache set number that should be used to cache the index
* based search results, for address and flow search. This
* value should be equal to LSB four bits of the hash value of
* match data, in case of search index points to an entry which
* may be used in content based search also. The value can be
* anything when the entry pointed by search index will not be
* used for content based search.
*
* ring_id
* The buffer pointer ring ID.
* 0 refers to the IDLE ring
* 1 - N refers to other rings
*
* looping_count
*
* A count value that indicates the number of times the
* producer of entries into the Ring has looped around the
* ring.
*
* At initialization time, this value is set to 0. On the
* first loop, this value is set to 1. After the max value is
* reached allowed by the number of bits for this field, the
* count value continues with 0 again.
*
* In case SW is the consumer of the ring entries, it can
* use this field to figure out up to where the producer of
* entries has created new entries. This eliminates the need to
* check where the head pointer' of the ring is located once
* the SW starts processing an interrupt indicating that new
* entries have been put into this ring...
*
* Also note that SW if it wants only needs to look at the
* LSB bit of this count value.
*/
#define HAL_TCL_DESC_LEN sizeof(struct hal_tcl_data_cmd)
enum hal_tcl_gse_ctrl {
HAL_TCL_GSE_CTRL_RD_STAT,
HAL_TCL_GSE_CTRL_SRCH_DIS,
HAL_TCL_GSE_CTRL_WR_BK_SINGLE,
HAL_TCL_GSE_CTRL_WR_BK_ALL,
HAL_TCL_GSE_CTRL_INVAL_SINGLE,
HAL_TCL_GSE_CTRL_INVAL_ALL,
HAL_TCL_GSE_CTRL_WR_BK_INVAL_SINGLE,
HAL_TCL_GSE_CTRL_WR_BK_INVAL_ALL,
HAL_TCL_GSE_CTRL_CLR_STAT_SINGLE,
};
/* hal_tcl_gse_ctrl
*
* rd_stat
* Report or Read statistics
* srch_dis
* Search disable. Report only Hash.
* wr_bk_single
* Write Back single entry
* wr_bk_all
* Write Back entire cache entry
* inval_single
* Invalidate single cache entry
* inval_all
* Invalidate entire cache
* wr_bk_inval_single
* Write back and invalidate single entry in cache
* wr_bk_inval_all
* Write back and invalidate entire cache
* clr_stat_single
* Clear statistics for single entry
*/
#define HAL_TCL_GSE_CMD_INFO0_CTRL_BUF_ADDR_HI GENMASK(7, 0)
#define HAL_TCL_GSE_CMD_INFO0_GSE_CTRL GENMASK(11, 8)
#define HAL_TCL_GSE_CMD_INFO0_GSE_SEL BIT(12)
#define HAL_TCL_GSE_CMD_INFO0_STATUS_DEST_RING_ID BIT(13)
#define HAL_TCL_GSE_CMD_INFO0_SWAP BIT(14)
#define HAL_TCL_GSE_CMD_INFO1_RING_ID GENMASK(27, 20)
#define HAL_TCL_GSE_CMD_INFO1_LOOPING_COUNT GENMASK(31, 28)
struct hal_tcl_gse_cmd {
u32 ctrl_buf_addr_lo;
u32 info0;
u32 meta_data[2];
u32 rsvd0[2];
u32 info1;
} __packed;
/* hal_tcl_gse_cmd
*
* ctrl_buf_addr_lo, ctrl_buf_addr_hi
* Address of a control buffer containing additional info needed
* for this command execution.
*
* gse_ctrl
* GSE control operations. This includes cache operations and table
* entry statistics read/clear operation. Values are defined in
* enum %HAL_TCL_GSE_CTRL.
*
* gse_sel
* To select the ASE/FSE to do the operation mention by GSE_ctrl.
* 0: FSE select 1: ASE select
*
* status_destination_ring_id
* TCL status ring to which the GSE status needs to be send.
*
* swap
* Bit to enable byte swapping of contents of buffer.
*
* meta_data
* Meta data to be returned in the status descriptor
*/
enum hal_tcl_cache_op_res {
HAL_TCL_CACHE_OP_RES_DONE,
HAL_TCL_CACHE_OP_RES_NOT_FOUND,
HAL_TCL_CACHE_OP_RES_TIMEOUT,
};
#define HAL_TCL_STATUS_RING_INFO0_GSE_CTRL GENMASK(3, 0)
#define HAL_TCL_STATUS_RING_INFO0_GSE_SEL BIT(4)
#define HAL_TCL_STATUS_RING_INFO0_CACHE_OP_RES GENMASK(6, 5)
#define HAL_TCL_STATUS_RING_INFO0_MSDU_CNT GENMASK(31, 8)
#define HAL_TCL_STATUS_RING_INFO1_HASH_IDX GENMASK(19, 0)
#define HAL_TCL_STATUS_RING_INFO2_RING_ID GENMASK(27, 20)
#define HAL_TCL_STATUS_RING_INFO2_LOOPING_COUNT GENMASK(31, 28)
struct hal_tcl_status_ring {
u32 info0;
u32 msdu_byte_count;
u32 msdu_timestamp;
u32 meta_data[2];
u32 info1;
u32 rsvd0;
u32 info2;
} __packed;
/* hal_tcl_status_ring
*
* gse_ctrl
* GSE control operations. This includes cache operations and table
* entry statistics read/clear operation. Values are defined in
* enum %HAL_TCL_GSE_CTRL.
*
* gse_sel
* To select the ASE/FSE to do the operation mention by GSE_ctrl.
* 0: FSE select 1: ASE select
*
* cache_op_res
* Cache operation result. Values are defined in enum
* %HAL_TCL_CACHE_OP_RES_.
*
* msdu_cnt
* msdu_byte_count
* MSDU count of Entry and MSDU byte count for entry 1.
*
* hash_indx
* Hash value of the entry in case of search failed or disabled.
*/
#define HAL_CE_SRC_DESC_ADDR_INFO_ADDR_HI GENMASK(7, 0)
#define HAL_CE_SRC_DESC_ADDR_INFO_HASH_EN BIT(8)
#define HAL_CE_SRC_DESC_ADDR_INFO_BYTE_SWAP BIT(9)
#define HAL_CE_SRC_DESC_ADDR_INFO_DEST_SWAP BIT(10)
#define HAL_CE_SRC_DESC_ADDR_INFO_GATHER BIT(11)
#define HAL_CE_SRC_DESC_ADDR_INFO_LEN GENMASK(31, 16)
#define HAL_CE_SRC_DESC_META_INFO_DATA GENMASK(15, 0)
#define HAL_CE_SRC_DESC_FLAGS_RING_ID GENMASK(27, 20)
#define HAL_CE_SRC_DESC_FLAGS_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT
struct hal_ce_srng_src_desc {
u32 buffer_addr_low;
u32 buffer_addr_info; /* %HAL_CE_SRC_DESC_ADDR_INFO_ */
u32 meta_info; /* %HAL_CE_SRC_DESC_META_INFO_ */
u32 flags; /* %HAL_CE_SRC_DESC_FLAGS_ */
} __packed;
/*
* hal_ce_srng_src_desc
*
* buffer_addr_lo
* LSB 32 bits of the 40 Bit Pointer to the source buffer
*
* buffer_addr_hi
* MSB 8 bits of the 40 Bit Pointer to the source buffer
*
* toeplitz_en
* Enable generation of 32-bit Toeplitz-LFSR hash for
* data transfer. In case of gather field in first source
* ring entry of the gather copy cycle in taken into account.
*
* src_swap
* Treats source memory organization as big-endian. For
* each dword read (4 bytes), the byte 0 is swapped with byte 3
* and byte 1 is swapped with byte 2.
* In case of gather field in first source ring entry of
* the gather copy cycle in taken into account.
*
* dest_swap
* Treats destination memory organization as big-endian.
* For each dword write (4 bytes), the byte 0 is swapped with
* byte 3 and byte 1 is swapped with byte 2.
* In case of gather field in first source ring entry of
* the gather copy cycle in taken into account.
*
* gather
* Enables gather of multiple copy engine source
* descriptors to one destination.
*
* ce_res_0
* Reserved
*
*
* length
* Length of the buffer in units of octets of the current
* descriptor
*
* fw_metadata
* Meta data used by FW.
* In case of gather field in first source ring entry of
* the gather copy cycle in taken into account.
*
* ce_res_1
* Reserved
*
* ce_res_2
* Reserved
*
* ring_id
* The buffer pointer ring ID.
* 0 refers to the IDLE ring
* 1 - N refers to other rings
* Helps with debugging when dumping ring contents.
*
* looping_count
* A count value that indicates the number of times the
* producer of entries into the Ring has looped around the
* ring.
*
* At initialization time, this value is set to 0. On the
* first loop, this value is set to 1. After the max value is
* reached allowed by the number of bits for this field, the
* count value continues with 0 again.
*
* In case SW is the consumer of the ring entries, it can
* use this field to figure out up to where the producer of
* entries has created new entries. This eliminates the need to
* check where the head pointer' of the ring is located once
* the SW starts processing an interrupt indicating that new
* entries have been put into this ring...
*
* Also note that SW if it wants only needs to look at the
* LSB bit of this count value.
*/
#define HAL_CE_DEST_DESC_ADDR_INFO_ADDR_HI GENMASK(7, 0)
#define HAL_CE_DEST_DESC_ADDR_INFO_RING_ID GENMASK(27, 20)
#define HAL_CE_DEST_DESC_ADDR_INFO_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT
struct hal_ce_srng_dest_desc {
u32 buffer_addr_low;
u32 buffer_addr_info; /* %HAL_CE_DEST_DESC_ADDR_INFO_ */
} __packed;
/* hal_ce_srng_dest_desc
*
* dst_buffer_low
* LSB 32 bits of the 40 Bit Pointer to the Destination
* buffer
*
* dst_buffer_high
* MSB 8 bits of the 40 Bit Pointer to the Destination
* buffer
*
* ce_res_4
* Reserved
*
* ring_id
* The buffer pointer ring ID.
* 0 refers to the IDLE ring
* 1 - N refers to other rings
* Helps with debugging when dumping ring contents.
*
* looping_count
* A count value that indicates the number of times the
* producer of entries into the Ring has looped around the
* ring.
*
* At initialization time, this value is set to 0. On the
* first loop, this value is set to 1. After the max value is
* reached allowed by the number of bits for this field, the
* count value continues with 0 again.
*
* In case SW is the consumer of the ring entries, it can
* use this field to figure out up to where the producer of
* entries has created new entries. This eliminates the need to
* check where the head pointer' of the ring is located once
* the SW starts processing an interrupt indicating that new
* entries have been put into this ring...
*
* Also note that SW if it wants only needs to look at the
* LSB bit of this count value.
*/
#define HAL_CE_DST_STATUS_DESC_FLAGS_HASH_EN BIT(8)
#define HAL_CE_DST_STATUS_DESC_FLAGS_BYTE_SWAP BIT(9)
#define HAL_CE_DST_STATUS_DESC_FLAGS_DEST_SWAP BIT(10)
#define HAL_CE_DST_STATUS_DESC_FLAGS_GATHER BIT(11)
#define HAL_CE_DST_STATUS_DESC_FLAGS_LEN GENMASK(31, 16)
#define HAL_CE_DST_STATUS_DESC_META_INFO_DATA GENMASK(15, 0)
#define HAL_CE_DST_STATUS_DESC_META_INFO_RING_ID GENMASK(27, 20)
#define HAL_CE_DST_STATUS_DESC_META_INFO_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT
struct hal_ce_srng_dst_status_desc {
u32 flags; /* %HAL_CE_DST_STATUS_DESC_FLAGS_ */
u32 toeplitz_hash0;
u32 toeplitz_hash1;
u32 meta_info; /* HAL_CE_DST_STATUS_DESC_META_INFO_ */
} __packed;
/* hal_ce_srng_dst_status_desc
*
* ce_res_5
* Reserved
*
* toeplitz_en
*
* src_swap
* Source memory buffer swapped
*
* dest_swap
* Destination memory buffer swapped
*
* gather
* Gather of multiple copy engine source descriptors to one
* destination enabled
*
* ce_res_6
* Reserved
*
* length
* Sum of all the Lengths of the source descriptor in the
* gather chain
*
* toeplitz_hash_0
* 32 LS bits of 64 bit Toeplitz LFSR hash result
*
* toeplitz_hash_1
* 32 MS bits of 64 bit Toeplitz LFSR hash result
*
* fw_metadata
* Meta data used by FW
* In case of gather field in first source ring entry of
* the gather copy cycle in taken into account.
*
* ce_res_7
* Reserved
*
* ring_id
* The buffer pointer ring ID.
* 0 refers to the IDLE ring
* 1 - N refers to other rings
* Helps with debugging when dumping ring contents.
*
* looping_count
* A count value that indicates the number of times the
* producer of entries into the Ring has looped around the
* ring.
*
* At initialization time, this value is set to 0. On the
* first loop, this value is set to 1. After the max value is
* reached allowed by the number of bits for this field, the
* count value continues with 0 again.
*
* In case SW is the consumer of the ring entries, it can
* use this field to figure out up to where the producer of
* entries has created new entries. This eliminates the need to
* check where the head pointer' of the ring is located once
* the SW starts processing an interrupt indicating that new
* entries have been put into this ring...
*
* Also note that SW if it wants only needs to look at the
* LSB bit of this count value.
*/
#define HAL_TX_RATE_STATS_INFO0_VALID BIT(0)
#define HAL_TX_RATE_STATS_INFO0_BW GENMASK(2, 1)
#define HAL_TX_RATE_STATS_INFO0_PKT_TYPE GENMASK(6, 3)
#define HAL_TX_RATE_STATS_INFO0_STBC BIT(7)
#define HAL_TX_RATE_STATS_INFO0_LDPC BIT(8)
#define HAL_TX_RATE_STATS_INFO0_SGI GENMASK(10, 9)
#define HAL_TX_RATE_STATS_INFO0_MCS GENMASK(14, 11)
#define HAL_TX_RATE_STATS_INFO0_OFDMA_TX BIT(15)
#define HAL_TX_RATE_STATS_INFO0_TONES_IN_RU GENMASK(27, 16)
enum hal_tx_rate_stats_bw {
HAL_TX_RATE_STATS_BW_20,
HAL_TX_RATE_STATS_BW_40,
HAL_TX_RATE_STATS_BW_80,
HAL_TX_RATE_STATS_BW_160,
};
enum hal_tx_rate_stats_pkt_type {
HAL_TX_RATE_STATS_PKT_TYPE_11A,
HAL_TX_RATE_STATS_PKT_TYPE_11B,
HAL_TX_RATE_STATS_PKT_TYPE_11N,
HAL_TX_RATE_STATS_PKT_TYPE_11AC,
HAL_TX_RATE_STATS_PKT_TYPE_11AX,
};
enum hal_tx_rate_stats_sgi {
HAL_TX_RATE_STATS_SGI_08US,
HAL_TX_RATE_STATS_SGI_04US,
HAL_TX_RATE_STATS_SGI_16US,
HAL_TX_RATE_STATS_SGI_32US,
};
struct hal_tx_rate_stats {
u32 info0;
u32 tsf;
} __packed;
struct hal_wbm_link_desc {
struct ath11k_buffer_addr buf_addr_info;
} __packed;
/* hal_wbm_link_desc
*
* Producer: WBM
* Consumer: WBM
*
* buf_addr_info
* Details of the physical address of a buffer or MSDU
* link descriptor.
*/
enum hal_wbm_rel_src_module {
HAL_WBM_REL_SRC_MODULE_TQM,
HAL_WBM_REL_SRC_MODULE_RXDMA,
HAL_WBM_REL_SRC_MODULE_REO,
HAL_WBM_REL_SRC_MODULE_FW,
HAL_WBM_REL_SRC_MODULE_SW,
};
enum hal_wbm_rel_desc_type {
HAL_WBM_REL_DESC_TYPE_REL_MSDU,
HAL_WBM_REL_DESC_TYPE_MSDU_LINK,
HAL_WBM_REL_DESC_TYPE_MPDU_LINK,
HAL_WBM_REL_DESC_TYPE_MSDU_EXT,
HAL_WBM_REL_DESC_TYPE_QUEUE_EXT,
};
/* hal_wbm_rel_desc_type
*
* msdu_buffer
* The address points to an MSDU buffer
*
* msdu_link_descriptor
* The address points to an Tx MSDU link descriptor
*
* mpdu_link_descriptor
* The address points to an MPDU link descriptor
*
* msdu_ext_descriptor
* The address points to an MSDU extension descriptor
*
* queue_ext_descriptor
* The address points to an TQM queue extension descriptor. WBM should
* treat this is the same way as a link descriptor.
*/
enum hal_wbm_rel_bm_act {
HAL_WBM_REL_BM_ACT_PUT_IN_IDLE,
HAL_WBM_REL_BM_ACT_REL_MSDU,
};
/* hal_wbm_rel_bm_act
*
* put_in_idle_list
* Put the buffer or descriptor back in the idle list. In case of MSDU or
* MDPU link descriptor, BM does not need to check to release any
* individual MSDU buffers.
*
* release_msdu_list
* This BM action can only be used in combination with desc_type being
* msdu_link_descriptor. Field first_msdu_index points out which MSDU
* pointer in the MSDU link descriptor is the first of an MPDU that is
* released. BM shall release all the MSDU buffers linked to this first
* MSDU buffer pointer. All related MSDU buffer pointer entries shall be
* set to value 0, which represents the 'NULL' pointer. When all MSDU
* buffer pointers in the MSDU link descriptor are 'NULL', the MSDU link
* descriptor itself shall also be released.
*/
#define HAL_WBM_RELEASE_INFO0_REL_SRC_MODULE GENMASK(2, 0)
#define HAL_WBM_RELEASE_INFO0_BM_ACTION GENMASK(5, 3)
#define HAL_WBM_RELEASE_INFO0_DESC_TYPE GENMASK(8, 6)
#define HAL_WBM_RELEASE_INFO0_FIRST_MSDU_IDX GENMASK(12, 9)
#define HAL_WBM_RELEASE_INFO0_TQM_RELEASE_REASON GENMASK(16, 13)
#define HAL_WBM_RELEASE_INFO0_RXDMA_PUSH_REASON GENMASK(18, 17)
#define HAL_WBM_RELEASE_INFO0_RXDMA_ERROR_CODE GENMASK(23, 19)
#define HAL_WBM_RELEASE_INFO0_REO_PUSH_REASON GENMASK(25, 24)
#define HAL_WBM_RELEASE_INFO0_REO_ERROR_CODE GENMASK(30, 26)
#define HAL_WBM_RELEASE_INFO0_WBM_INTERNAL_ERROR BIT(31)
#define HAL_WBM_RELEASE_INFO1_TQM_STATUS_NUMBER GENMASK(23, 0)
#define HAL_WBM_RELEASE_INFO1_TRANSMIT_COUNT GENMASK(30, 24)
#define HAL_WBM_RELEASE_INFO2_ACK_FRAME_RSSI GENMASK(7, 0)
#define HAL_WBM_RELEASE_INFO2_SW_REL_DETAILS_VALID BIT(8)
#define HAL_WBM_RELEASE_INFO2_FIRST_MSDU BIT(9)
#define HAL_WBM_RELEASE_INFO2_LAST_MSDU BIT(10)
#define HAL_WBM_RELEASE_INFO2_MSDU_IN_AMSDU BIT(11)
#define HAL_WBM_RELEASE_INFO2_FW_TX_NOTIF_FRAME BIT(12)
#define HAL_WBM_RELEASE_INFO2_BUFFER_TIMESTAMP GENMASK(31, 13)
#define HAL_WBM_RELEASE_INFO3_PEER_ID GENMASK(15, 0)
#define HAL_WBM_RELEASE_INFO3_TID GENMASK(19, 16)
#define HAL_WBM_RELEASE_INFO3_RING_ID GENMASK(27, 20)
#define HAL_WBM_RELEASE_INFO3_LOOPING_COUNT GENMASK(31, 28)
#define HAL_WBM_REL_HTT_TX_COMP_INFO0_STATUS GENMASK(12, 9)
#define HAL_WBM_REL_HTT_TX_COMP_INFO0_REINJ_REASON GENMASK(16, 13)
#define HAL_WBM_REL_HTT_TX_COMP_INFO0_EXP_FRAME BIT(17)
struct hal_wbm_release_ring {
struct ath11k_buffer_addr buf_addr_info;
u32 info0;
u32 info1;
u32 info2;
struct hal_tx_rate_stats rate_stats;
u32 info3;
} __packed;
/* hal_wbm_release_ring
*
* Producer: SW/TQM/RXDMA/REO/SWITCH
* Consumer: WBM/SW/FW
*
* HTT tx status is overlayed on wbm_release ring on 4-byte words 2, 3, 4 and 5
* for software based completions.
*
* buf_addr_info
* Details of the physical address of the buffer or link descriptor.
*
* release_source_module
* Indicates which module initiated the release of this buffer/descriptor.
* Values are defined in enum %HAL_WBM_REL_SRC_MODULE_.
*
* bm_action
* Field only valid when the field return_buffer_manager in
* Released_buff_or_desc_addr_info indicates:
* WBM_IDLE_BUF_LIST / WBM_IDLE_DESC_LIST
* Values are defined in enum %HAL_WBM_REL_BM_ACT_.
*
* buffer_or_desc_type
* Field only valid when WBM is marked as the return_buffer_manager in
* the Released_Buffer_address_info. Indicates that type of buffer or
* descriptor is being released. Values are in enum %HAL_WBM_REL_DESC_TYPE.
*
* first_msdu_index
* Field only valid for the bm_action release_msdu_list. The index of the
* first MSDU in an MSDU link descriptor all belonging to the same MPDU.
*
* tqm_release_reason
* Field only valid when Release_source_module is set to release_source_TQM
* Release reasons are defined in enum %HAL_WBM_TQM_REL_REASON_.
*
* rxdma_push_reason
* reo_push_reason
* Indicates why rxdma/reo pushed the frame to this ring and values are
* defined in enum %HAL_REO_DEST_RING_PUSH_REASON_.
*
* rxdma_error_code
* Field only valid when 'rxdma_push_reason' set to 'error_detected'.
* Values are defined in enum %HAL_REO_ENTR_RING_RXDMA_ECODE_.
*
* reo_error_code
* Field only valid when 'reo_push_reason' set to 'error_detected'. Values
* are defined in enum %HAL_REO_DEST_RING_ERROR_CODE_.
*
* wbm_internal_error
* Is set when WBM got a buffer pointer but the action was to push it to
* the idle link descriptor ring or do link related activity OR
* Is set when WBM got a link buffer pointer but the action was to push it
* to the buffer descriptor ring.
*
* tqm_status_number
* The value in this field is equal to tqm_cmd_number in TQM command. It is
* used to correlate the statu with TQM commands. Only valid when
* release_source_module is TQM.
*
* transmit_count
* The number of times the frame has been transmitted, valid only when
* release source in TQM.
*
* ack_frame_rssi
* This field is only valid when the source is TQM. If this frame is
* removed as the result of the reception of an ACK or BA, this field
* indicates the RSSI of the received ACK or BA frame.
*
* sw_release_details_valid
* This is set when WMB got a 'release_msdu_list' command from TQM and
* return buffer manager is not WMB. WBM will then de-aggregate all MSDUs
* and pass them one at a time on to the 'buffer owner'.
*
* first_msdu
* Field only valid when SW_release_details_valid is set.
* When set, this MSDU is the first MSDU pointed to in the
* 'release_msdu_list' command.
*
* last_msdu
* Field only valid when SW_release_details_valid is set.
* When set, this MSDU is the last MSDU pointed to in the
* 'release_msdu_list' command.
*
* msdu_part_of_amsdu
* Field only valid when SW_release_details_valid is set.
* When set, this MSDU was part of an A-MSDU in MPDU
*
* fw_tx_notify_frame
* Field only valid when SW_release_details_valid is set.
*
* buffer_timestamp
* Field only valid when SW_release_details_valid is set.
* This is the Buffer_timestamp field from the
* Timestamp in units of 1024 us
*
* struct hal_tx_rate_stats rate_stats
* Details for command execution tracking purposes.
*
* sw_peer_id
* tid
* Field only valid when Release_source_module is set to
* release_source_TQM
*
* 1) Release of msdu buffer due to drop_frame = 1. Flow is
* not fetched and hence sw_peer_id and tid = 0
*
* buffer_or_desc_type = e_num 0
* MSDU_rel_buffertqm_release_reason = e_num 1
* tqm_rr_rem_cmd_rem
*
* 2) Release of msdu buffer due to Flow is not fetched and
* hence sw_peer_id and tid = 0
*
* buffer_or_desc_type = e_num 0
* MSDU_rel_buffertqm_release_reason = e_num 1
* tqm_rr_rem_cmd_rem
*
* 3) Release of msdu link due to remove_mpdu or acked_mpdu
* command.
*
* buffer_or_desc_type = e_num1
* msdu_link_descriptortqm_release_reason can be:e_num 1
* tqm_rr_rem_cmd_reme_num 2 tqm_rr_rem_cmd_tx
* e_num 3 tqm_rr_rem_cmd_notxe_num 4 tqm_rr_rem_cmd_aged
*
* This field represents the TID from the TX_MSDU_FLOW
* descriptor or TX_MPDU_QUEUE descriptor
*
* rind_id
* For debugging.
* This field is filled in by the SRNG module.
* It help to identify the ring that is being looked
*
* looping_count
* A count value that indicates the number of times the
* producer of entries into the Buffer Manager Ring has looped
* around the ring.
*
* At initialization time, this value is set to 0. On the
* first loop, this value is set to 1. After the max value is
* reached allowed by the number of bits for this field, the
* count value continues with 0 again.
*
* In case SW is the consumer of the ring entries, it can
* use this field to figure out up to where the producer of
* entries has created new entries. This eliminates the need to
* check where the head pointer' of the ring is located once
* the SW starts processing an interrupt indicating that new
* entries have been put into this ring...
*
* Also note that SW if it wants only needs to look at the
* LSB bit of this count value.
*/
/**
* enum hal_wbm_tqm_rel_reason - TQM release reason code
* @HAL_WBM_TQM_REL_REASON_FRAME_ACKED: ACK or BACK received for the frame
* @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU: Command remove_mpdus initiated by SW
* @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX: Command remove transmitted_mpdus
* initiated by sw.
* @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX: Command remove untransmitted_mpdus
* initiated by sw.
* @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES: Command remove aged msdus or
* mpdus.
* @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1: Remove command initiated by
* fw with fw_reason1.
* @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2: Remove command initiated by
* fw with fw_reason2.
* @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3: Remove command initiated by
* fw with fw_reason3.
*/
enum hal_wbm_tqm_rel_reason {
HAL_WBM_TQM_REL_REASON_FRAME_ACKED,
HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU,
HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX,
HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX,
HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES,
HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1,
HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2,
HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3,
};
struct hal_wbm_buffer_ring {
struct ath11k_buffer_addr buf_addr_info;
};
enum hal_desc_owner {
HAL_DESC_OWNER_WBM,
HAL_DESC_OWNER_SW,
HAL_DESC_OWNER_TQM,
HAL_DESC_OWNER_RXDMA,
HAL_DESC_OWNER_REO,
HAL_DESC_OWNER_SWITCH,
};
enum hal_desc_buf_type {
HAL_DESC_BUF_TYPE_TX_MSDU_LINK,
HAL_DESC_BUF_TYPE_TX_MPDU_LINK,
HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_HEAD,
HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_EXT,
HAL_DESC_BUF_TYPE_TX_FLOW,
HAL_DESC_BUF_TYPE_TX_BUFFER,
HAL_DESC_BUF_TYPE_RX_MSDU_LINK,
HAL_DESC_BUF_TYPE_RX_MPDU_LINK,
HAL_DESC_BUF_TYPE_RX_REO_QUEUE,
HAL_DESC_BUF_TYPE_RX_REO_QUEUE_EXT,
HAL_DESC_BUF_TYPE_RX_BUFFER,
HAL_DESC_BUF_TYPE_IDLE_LINK,
};
#define HAL_DESC_REO_OWNED 4
#define HAL_DESC_REO_QUEUE_DESC 8
#define HAL_DESC_REO_QUEUE_EXT_DESC 9
#define HAL_DESC_REO_NON_QOS_TID 16
#define HAL_DESC_HDR_INFO0_OWNER GENMASK(3, 0)
#define HAL_DESC_HDR_INFO0_BUF_TYPE GENMASK(7, 4)
#define HAL_DESC_HDR_INFO0_DBG_RESERVED GENMASK(31, 8)
struct hal_desc_header {
u32 info0;
} __packed;
struct hal_rx_mpdu_link_ptr {
struct ath11k_buffer_addr addr_info;
} __packed;
struct hal_rx_msdu_details {
struct ath11k_buffer_addr buf_addr_info;
struct rx_msdu_desc rx_msdu_info;
} __packed;
#define HAL_RX_MSDU_LNK_INFO0_RX_QUEUE_NUMBER GENMASK(15, 0)
#define HAL_RX_MSDU_LNK_INFO0_FIRST_MSDU_LNK BIT(16)
struct hal_rx_msdu_link {
struct hal_desc_header desc_hdr;
struct ath11k_buffer_addr buf_addr_info;
u32 info0;
u32 pn[4];
struct hal_rx_msdu_details msdu_link[6];
} __packed;
struct hal_rx_reo_queue_ext {
struct hal_desc_header desc_hdr;
u32 rsvd;
struct hal_rx_mpdu_link_ptr mpdu_link[15];
} __packed;
/* hal_rx_reo_queue_ext
* Consumer: REO
* Producer: REO
*
* descriptor_header
* Details about which module owns this struct.
*
* mpdu_link
* Pointer to the next MPDU_link descriptor in the MPDU queue.
*/
enum hal_rx_reo_queue_pn_size {
HAL_RX_REO_QUEUE_PN_SIZE_24,
HAL_RX_REO_QUEUE_PN_SIZE_48,
HAL_RX_REO_QUEUE_PN_SIZE_128,
};
#define HAL_RX_REO_QUEUE_RX_QUEUE_NUMBER GENMASK(15, 0)
#define HAL_RX_REO_QUEUE_INFO0_VLD BIT(0)
#define HAL_RX_REO_QUEUE_INFO0_ASSOC_LNK_DESC_COUNTER GENMASK(2, 1)
#define HAL_RX_REO_QUEUE_INFO0_DIS_DUP_DETECTION BIT(3)
#define HAL_RX_REO_QUEUE_INFO0_SOFT_REORDER_EN BIT(4)
#define HAL_RX_REO_QUEUE_INFO0_AC GENMASK(6, 5)
#define HAL_RX_REO_QUEUE_INFO0_BAR BIT(7)
#define HAL_RX_REO_QUEUE_INFO0_RETRY BIT(8)
#define HAL_RX_REO_QUEUE_INFO0_CHECK_2K_MODE BIT(9)
#define HAL_RX_REO_QUEUE_INFO0_OOR_MODE BIT(10)
#define HAL_RX_REO_QUEUE_INFO0_BA_WINDOW_SIZE GENMASK(18, 11)
#define HAL_RX_REO_QUEUE_INFO0_PN_CHECK BIT(19)
#define HAL_RX_REO_QUEUE_INFO0_EVEN_PN BIT(20)
#define HAL_RX_REO_QUEUE_INFO0_UNEVEN_PN BIT(21)
#define HAL_RX_REO_QUEUE_INFO0_PN_HANDLE_ENABLE BIT(22)
#define HAL_RX_REO_QUEUE_INFO0_PN_SIZE GENMASK(24, 23)
#define HAL_RX_REO_QUEUE_INFO0_IGNORE_AMPDU_FLG BIT(25)
#define HAL_RX_REO_QUEUE_INFO1_SVLD BIT(0)
#define HAL_RX_REO_QUEUE_INFO1_SSN GENMASK(12, 1)
#define HAL_RX_REO_QUEUE_INFO1_CURRENT_IDX GENMASK(20, 13)
#define HAL_RX_REO_QUEUE_INFO1_SEQ_2K_ERR BIT(21)
#define HAL_RX_REO_QUEUE_INFO1_PN_ERR BIT(22)
#define HAL_RX_REO_QUEUE_INFO1_PN_VALID BIT(31)
#define HAL_RX_REO_QUEUE_INFO2_MPDU_COUNT GENMASK(6, 0)
#define HAL_RX_REO_QUEUE_INFO2_MSDU_COUNT (31, 7)
#define HAL_RX_REO_QUEUE_INFO3_TIMEOUT_COUNT GENMASK(9, 4)
#define HAL_RX_REO_QUEUE_INFO3_FWD_DUE_TO_BAR_CNT GENMASK(15, 10)
#define HAL_RX_REO_QUEUE_INFO3_DUPLICATE_COUNT GENMASK(31, 16)
#define HAL_RX_REO_QUEUE_INFO4_FRAME_IN_ORD_COUNT GENMASK(23, 0)
#define HAL_RX_REO_QUEUE_INFO4_BAR_RECVD_COUNT GENMASK(31, 24)
#define HAL_RX_REO_QUEUE_INFO5_LATE_RX_MPDU_COUNT GENMASK(11, 0)
#define HAL_RX_REO_QUEUE_INFO5_WINDOW_JUMP_2K GENMASK(15, 12)
#define HAL_RX_REO_QUEUE_INFO5_HOLE_COUNT GENMASK(31, 16)
struct hal_rx_reo_queue {
struct hal_desc_header desc_hdr;
u32 rx_queue_num;
u32 info0;
u32 info1;
u32 pn[4];
u32 last_rx_enqueue_timestamp;
u32 last_rx_dequeue_timestamp;
u32 next_aging_queue[2];
u32 prev_aging_queue[2];
u32 rx_bitmap[8];
u32 info2;
u32 info3;
u32 info4;
u32 processed_mpdus;
u32 processed_msdus;
u32 processed_total_bytes;
u32 info5;
u32 rsvd[3];
struct hal_rx_reo_queue_ext ext_desc[];
} __packed;
/* hal_rx_reo_queue
*
* descriptor_header
* Details about which module owns this struct. Note that sub field
* Buffer_type shall be set to receive_reo_queue_descriptor.
*
* receive_queue_number
* Indicates the MPDU queue ID to which this MPDU link descriptor belongs.
*
* vld
* Valid bit indicating a session is established and the queue descriptor
* is valid.
* associated_link_descriptor_counter
* Indicates which of the 3 link descriptor counters shall be incremented
* or decremented when link descriptors are added or removed from this
* flow queue.
* disable_duplicate_detection
* When set, do not perform any duplicate detection.
* soft_reorder_enable
* When set, REO has been instructed to not perform the actual re-ordering
* of frames for this queue, but just to insert the reorder opcodes.
* ac
* Indicates the access category of the queue descriptor.
* bar
* Indicates if BAR has been received.
* retry
* Retry bit is checked if this bit is set.
* chk_2k_mode
* Indicates what type of operation is expected from Reo when the received
* frame SN falls within the 2K window.
* oor_mode
* Indicates what type of operation is expected when the received frame
* falls within the OOR window.
* ba_window_size
* Indicates the negotiated (window size + 1). Max of 256 bits.
*
* A value 255 means 256 bitmap, 63 means 64 bitmap, 0 (means non-BA
* session, with window size of 0). The 3 values here are the main values
* validated, but other values should work as well.
*
* A BA window size of 0 (=> one frame entry bitmat), means that there is
* no additional rx_reo_queue_ext desc. following rx_reo_queue in memory.
* A BA window size of 1 - 105, means that there is 1 rx_reo_queue_ext.
* A BA window size of 106 - 210, means that there are 2 rx_reo_queue_ext.
* A BA window size of 211 - 256, means that there are 3 rx_reo_queue_ext.
* pn_check_needed, pn_shall_be_even, pn_shall_be_uneven, pn_handling_enable,
* pn_size
* REO shall perform the PN increment check, even number check, uneven
* number check, PN error check and size of the PN field check.
* ignore_ampdu_flag
* REO shall ignore the ampdu_flag on entrance descriptor for this queue.
*
* svld
* Sequence number in next field is valid one.
* ssn
* Starting Sequence number of the session.
* current_index
* Points to last forwarded packet
* seq_2k_error_detected_flag
* REO has detected a 2k error jump in the sequence number and from that
* moment forward, all new frames are forwarded directly to FW, without
* duplicate detect, reordering, etc.
* pn_error_detected_flag
* REO has detected a PN error.
*/
#define HAL_REO_UPD_RX_QUEUE_INFO0_QUEUE_ADDR_HI GENMASK(7, 0)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RX_QUEUE_NUM BIT(8)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_VLD BIT(9)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_ASSOC_LNK_DESC_CNT BIT(10)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_DIS_DUP_DETECTION BIT(11)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SOFT_REORDER_EN BIT(12)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_AC BIT(13)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BAR BIT(14)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RETRY BIT(15)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_CHECK_2K_MODE BIT(16)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_OOR_MODE BIT(17)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BA_WINDOW_SIZE BIT(18)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_CHECK BIT(19)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_EVEN_PN BIT(20)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_UNEVEN_PN BIT(21)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_HANDLE_ENABLE BIT(22)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_SIZE BIT(23)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_IGNORE_AMPDU_FLG BIT(24)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SVLD BIT(25)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SSN BIT(26)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SEQ_2K_ERR BIT(27)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_ERR BIT(28)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_VALID BIT(29)
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN BIT(30)
#define HAL_REO_UPD_RX_QUEUE_INFO1_RX_QUEUE_NUMBER GENMASK(15, 0)
#define HAL_REO_UPD_RX_QUEUE_INFO1_VLD BIT(16)
#define HAL_REO_UPD_RX_QUEUE_INFO1_ASSOC_LNK_DESC_COUNTER GENMASK(18, 17)
#define HAL_REO_UPD_RX_QUEUE_INFO1_DIS_DUP_DETECTION BIT(19)
#define HAL_REO_UPD_RX_QUEUE_INFO1_SOFT_REORDER_EN BIT(20)
#define HAL_REO_UPD_RX_QUEUE_INFO1_AC GENMASK(22, 21)
#define HAL_REO_UPD_RX_QUEUE_INFO1_BAR BIT(23)
#define HAL_REO_UPD_RX_QUEUE_INFO1_RETRY BIT(24)
#define HAL_REO_UPD_RX_QUEUE_INFO1_CHECK_2K_MODE BIT(25)
#define HAL_REO_UPD_RX_QUEUE_INFO1_OOR_MODE BIT(26)
#define HAL_REO_UPD_RX_QUEUE_INFO1_PN_CHECK BIT(27)
#define HAL_REO_UPD_RX_QUEUE_INFO1_EVEN_PN BIT(28)
#define HAL_REO_UPD_RX_QUEUE_INFO1_UNEVEN_PN BIT(29)
#define HAL_REO_UPD_RX_QUEUE_INFO1_PN_HANDLE_ENABLE BIT(30)
#define HAL_REO_UPD_RX_QUEUE_INFO1_IGNORE_AMPDU_FLG BIT(31)
#define HAL_REO_UPD_RX_QUEUE_INFO2_BA_WINDOW_SIZE GENMASK(7, 0)
#define HAL_REO_UPD_RX_QUEUE_INFO2_PN_SIZE GENMASK(9, 8)
#define HAL_REO_UPD_RX_QUEUE_INFO2_SVLD BIT(10)
#define HAL_REO_UPD_RX_QUEUE_INFO2_SSN GENMASK(22, 11)
#define HAL_REO_UPD_RX_QUEUE_INFO2_SEQ_2K_ERR BIT(23)
#define HAL_REO_UPD_RX_QUEUE_INFO2_PN_ERR BIT(24)
#define HAL_REO_UPD_RX_QUEUE_INFO2_PN_VALID BIT(25)
struct hal_reo_update_rx_queue {
struct hal_reo_cmd_hdr cmd;
u32 queue_addr_lo;
u32 info0;
u32 info1;
u32 info2;
u32 pn[4];
} __packed;
#define HAL_REO_UNBLOCK_CACHE_INFO0_UNBLK_CACHE BIT(0)
#define HAL_REO_UNBLOCK_CACHE_INFO0_RESOURCE_IDX GENMASK(2, 1)
struct hal_reo_unblock_cache {
struct hal_reo_cmd_hdr cmd;
u32 info0;
u32 rsvd[7];
} __packed;
enum hal_reo_exec_status {
HAL_REO_EXEC_STATUS_SUCCESS,
HAL_REO_EXEC_STATUS_BLOCKED,
HAL_REO_EXEC_STATUS_FAILED,
HAL_REO_EXEC_STATUS_RESOURCE_BLOCKED,
};
#define HAL_REO_STATUS_HDR_INFO0_STATUS_NUM GENMASK(15, 0)
#define HAL_REO_STATUS_HDR_INFO0_EXEC_TIME GENMASK(25, 16)
#define HAL_REO_STATUS_HDR_INFO0_EXEC_STATUS GENMASK(27, 26)
struct hal_reo_status_hdr {
u32 info0;
u32 timestamp;
} __packed;
/* hal_reo_status_hdr
* Producer: REO
* Consumer: SW
*
* status_num
* The value in this field is equal to value of the reo command
* number. This field helps to correlate the statuses with the REO
* commands.
*
* execution_time (in us)
* The amount of time REO took to excecute the command. Note that
* this time does not include the duration of the command waiting
* in the command ring, before the execution started.
*
* execution_status
* Execution status of the command. Values are defined in
* enum %HAL_REO_EXEC_STATUS_.
*/
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_SSN GENMASK(11, 0)
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_CUR_IDX GENMASK(19, 12)
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MPDU_COUNT GENMASK(6, 0)
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MSDU_COUNT GENMASK(31, 7)
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_TIMEOUT_COUNT GENMASK(9, 4)
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_FDTB_COUNT GENMASK(15, 10)
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_DUPLICATE_COUNT GENMASK(31, 16)
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_FIO_COUNT GENMASK(23, 0)
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_BAR_RCVD_CNT GENMASK(31, 24)
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_LATE_RX_MPDU GENMASK(11, 0)
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_WINDOW_JMP2K GENMASK(15, 12)
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_HOLE_COUNT GENMASK(31, 16)
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO5_LOOPING_CNT GENMASK(31, 28)
struct hal_reo_get_queue_stats_status {
struct hal_reo_status_hdr hdr;
u32 info0;
u32 pn[4];
u32 last_rx_enqueue_timestamp;
u32 last_rx_dequeue_timestamp;
u32 rx_bitmap[8];
u32 info1;
u32 info2;
u32 info3;
u32 num_mpdu_frames;
u32 num_msdu_frames;
u32 total_bytes;
u32 info4;
u32 info5;
} __packed;
/* hal_reo_get_queue_stats_status
* Producer: REO
* Consumer: SW
*
* status_hdr
* Details that can link this status with the original command. It
* also contains info on how long REO took to execute this command.
*
* ssn
* Starting Sequence number of the session, this changes whenever
* window moves (can be filled by SW then maintained by REO).
*
* current_index
* Points to last forwarded packet.
*
* pn
* Bits of the PN number.
*
* last_rx_enqueue_timestamp
* last_rx_dequeue_timestamp
* Timestamp of arrival of the last MPDU for this queue and
* Timestamp of forwarding an MPDU accordingly.
*
* rx_bitmap
* When a bit is set, the corresponding frame is currently held
* in the re-order queue. The bitmap is Fully managed by HW.
*
* current_mpdu_count
* current_msdu_count
* The number of MPDUs and MSDUs in the queue.
*
* timeout_count
* The number of times REO started forwarding frames even though
* there is a hole in the bitmap. Forwarding reason is timeout.
*
* forward_due_to_bar_count
* The number of times REO started forwarding frames even though
* there is a hole in the bitmap. Fwd reason is reception of BAR.
*
* duplicate_count
* The number of duplicate frames that have been detected.
*
* frames_in_order_count
* The number of frames that have been received in order (without
* a hole that prevented them from being forwarded immediately).
*
* bar_received_count
* The number of times a BAR frame is received.
*
* mpdu_frames_processed_count
* msdu_frames_processed_count
* The total number of MPDU/MSDU frames that have been processed.
*
* total_bytes
* An approximation of the number of bytes received for this queue.
*
* late_receive_mpdu_count
* The number of MPDUs received after the window had already moved
* on. The 'late' sequence window is defined as
* (Window SSN - 256) - (Window SSN - 1).
*
* window_jump_2k
* The number of times the window moved more than 2K
*
* hole_count
* The number of times a hole was created in the receive bitmap.
*
* looping_count
* A count value that indicates the number of times the producer of
* entries into this Ring has looped around the ring.
*/
#define HAL_REO_STATUS_LOOP_CNT GENMASK(31, 28)
#define HAL_REO_FLUSH_QUEUE_INFO0_ERR_DETECTED BIT(0)
#define HAL_REO_FLUSH_QUEUE_INFO0_RSVD GENMASK(31, 1)
#define HAL_REO_FLUSH_QUEUE_INFO1_RSVD GENMASK(27, 0)
struct hal_reo_flush_queue_status {
struct hal_reo_status_hdr hdr;
u32 info0;
u32 rsvd0[21];
u32 info1;
} __packed;
/* hal_reo_flush_queue_status
* Producer: REO
* Consumer: SW
*
* status_hdr
* Details that can link this status with the original command. It
* also contains info on how long REO took to execute this command.
*
* error_detected
* Status of blocking resource
*
* 0 - No error has been detected while executing this command
* 1 - Error detected. The resource to be used for blocking was
* already in use.
*
* looping_count
* A count value that indicates the number of times the producer of
* entries into this Ring has looped around the ring.
*/
#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_IS_ERR BIT(0)
#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_BLOCK_ERR_CODE GENMASK(2, 1)
#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_STATUS_HIT BIT(8)
#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_DESC_TYPE GENMASK(11, 9)
#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_CLIENT_ID GENMASK(15, 12)
#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_ERR GENMASK(17, 16)
#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_COUNT GENMASK(25, 18)
struct hal_reo_flush_cache_status {
struct hal_reo_status_hdr hdr;
u32 info0;
u32 rsvd0[21];
u32 info1;
} __packed;
/* hal_reo_flush_cache_status
* Producer: REO
* Consumer: SW
*
* status_hdr
* Details that can link this status with the original command. It
* also contains info on how long REO took to execute this command.
*
* error_detected
* Status for blocking resource handling
*
* 0 - No error has been detected while executing this command
* 1 - An error in the blocking resource management was detected
*
* block_error_details
* only valid when error_detected is set
*
* 0 - No blocking related errors found
* 1 - Blocking resource is already in use
* 2 - Resource requested to be unblocked, was not blocked
*
* cache_controller_flush_status_hit
* The status that the cache controller returned on executing the
* flush command.
*
* 0 - miss; 1 - hit
*
* cache_controller_flush_status_desc_type
* Flush descriptor type
*
* cache_controller_flush_status_client_id
* Module who made the flush request
*
* In REO, this is always 0
*
* cache_controller_flush_status_error
* Error condition
*
* 0 - No error found
* 1 - HW interface is still busy
* 2 - Line currently locked. Used for one line flush command
* 3 - At least one line is still locked.
* Used for cache flush command.
*
* cache_controller_flush_count
* The number of lines that were actually flushed out
*
* looping_count
* A count value that indicates the number of times the producer of
* entries into this Ring has looped around the ring.
*/
#define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_IS_ERR BIT(0)
#define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_TYPE BIT(1)
struct hal_reo_unblock_cache_status {
struct hal_reo_status_hdr hdr;
u32 info0;
u32 rsvd0[21];
u32 info1;
} __packed;
/* hal_reo_unblock_cache_status
* Producer: REO
* Consumer: SW
*
* status_hdr
* Details that can link this status with the original command. It
* also contains info on how long REO took to execute this command.
*
* error_detected
* 0 - No error has been detected while executing this command
* 1 - The blocking resource was not in use, and therefore it could
* not be unblocked.
*
* unblock_type
* Reference to the type of unblock command
* 0 - Unblock a blocking resource
* 1 - The entire cache usage is unblock
*
* looping_count
* A count value that indicates the number of times the producer of
* entries into this Ring has looped around the ring.
*/
#define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_IS_ERR BIT(0)
#define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_LIST_EMPTY BIT(1)
#define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_REL_DESC_COUNT GENMASK(15, 0)
#define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_FWD_BUF_COUNT GENMASK(31, 16)
struct hal_reo_flush_timeout_list_status {
struct hal_reo_status_hdr hdr;
u32 info0;
u32 info1;
u32 rsvd0[20];
u32 info2;
} __packed;
/* hal_reo_flush_timeout_list_status
* Producer: REO
* Consumer: SW
*
* status_hdr
* Details that can link this status with the original command. It
* also contains info on how long REO took to execute this command.
*
* error_detected
* 0 - No error has been detected while executing this command
* 1 - Command not properly executed and returned with error
*
* timeout_list_empty
* When set, REO has depleted the timeout list and all entries are
* gone.
*
* release_desc_count
* Producer: SW; Consumer: REO
* The number of link descriptor released
*
* forward_buf_count
* Producer: SW; Consumer: REO
* The number of buffers forwarded to the REO destination rings
*
* looping_count
* A count value that indicates the number of times the producer of
* entries into this Ring has looped around the ring.
*/
#define HAL_REO_DESC_THRESH_STATUS_INFO0_THRESH_INDEX GENMASK(1, 0)
#define HAL_REO_DESC_THRESH_STATUS_INFO1_LINK_DESC_COUNTER0 GENMASK(23, 0)
#define HAL_REO_DESC_THRESH_STATUS_INFO2_LINK_DESC_COUNTER1 GENMASK(23, 0)
#define HAL_REO_DESC_THRESH_STATUS_INFO3_LINK_DESC_COUNTER2 GENMASK(23, 0)
#define HAL_REO_DESC_THRESH_STATUS_INFO4_LINK_DESC_COUNTER_SUM GENMASK(25, 0)
struct hal_reo_desc_thresh_reached_status {
struct hal_reo_status_hdr hdr;
u32 info0;
u32 info1;
u32 info2;
u32 info3;
u32 info4;
u32 rsvd0[17];
u32 info5;
} __packed;
/* hal_reo_desc_thresh_reached_status
* Producer: REO
* Consumer: SW
*
* status_hdr
* Details that can link this status with the original command. It
* also contains info on how long REO took to execute this command.
*
* threshold_index
* The index of the threshold register whose value got reached
*
* link_descriptor_counter0
* link_descriptor_counter1
* link_descriptor_counter2
* link_descriptor_counter_sum
* Value of the respective counters at generation of this message
*
* looping_count
* A count value that indicates the number of times the producer of
* entries into this Ring has looped around the ring.
*/
#endif /* ATH11K_HAL_DESC_H */