| // SPDX-License-Identifier: GPL-2.0 |
| #include <linux/clk-provider.h> |
| #include <linux/clk/at91_pmc.h> |
| #include <linux/of.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| #include "pmc.h" |
| |
| #define MASTER_SOURCE_MAX 4 |
| |
| #define PERIPHERAL_AT91RM9200 0 |
| #define PERIPHERAL_AT91SAM9X5 1 |
| |
| #define PERIPHERAL_MAX 64 |
| |
| #define PERIPHERAL_ID_MIN 2 |
| |
| #define PROG_SOURCE_MAX 5 |
| #define PROG_ID_MAX 7 |
| |
| #define SYSTEM_MAX_ID 31 |
| |
| #define GCK_INDEX_DT_AUDIO_PLL 5 |
| |
| static DEFINE_SPINLOCK(mck_lock); |
| |
| #ifdef CONFIG_HAVE_AT91_AUDIO_PLL |
| static void __init of_sama5d2_clk_audio_pll_frac_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| const char *name = np->name; |
| const char *parent_name; |
| struct regmap *regmap; |
| struct device_node *parent_np; |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| parent_name = of_clk_get_parent_name(np, 0); |
| |
| hw = at91_clk_register_audio_pll_frac(regmap, name, parent_name); |
| if (IS_ERR(hw)) |
| return; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_frac_setup, |
| "atmel,sama5d2-clk-audio-pll-frac", |
| of_sama5d2_clk_audio_pll_frac_setup); |
| |
| static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| const char *name = np->name; |
| const char *parent_name; |
| struct regmap *regmap; |
| struct device_node *parent_np; |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| parent_name = of_clk_get_parent_name(np, 0); |
| |
| hw = at91_clk_register_audio_pll_pad(regmap, name, parent_name); |
| if (IS_ERR(hw)) |
| return; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_pad_setup, |
| "atmel,sama5d2-clk-audio-pll-pad", |
| of_sama5d2_clk_audio_pll_pad_setup); |
| |
| static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| const char *name = np->name; |
| const char *parent_name; |
| struct regmap *regmap; |
| struct device_node *parent_np; |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| parent_name = of_clk_get_parent_name(np, 0); |
| |
| hw = at91_clk_register_audio_pll_pmc(regmap, name, parent_name); |
| if (IS_ERR(hw)) |
| return; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_pmc_setup, |
| "atmel,sama5d2-clk-audio-pll-pmc", |
| of_sama5d2_clk_audio_pll_pmc_setup); |
| #endif /* CONFIG_HAVE_AT91_AUDIO_PLL */ |
| |
| static const struct clk_pcr_layout dt_pcr_layout = { |
| .offset = 0x10c, |
| .cmd = BIT(12), |
| .pid_mask = GENMASK(5, 0), |
| .div_mask = GENMASK(17, 16), |
| .gckcss_mask = GENMASK(10, 8), |
| }; |
| |
| #ifdef CONFIG_HAVE_AT91_GENERATED_CLK |
| #define GENERATED_SOURCE_MAX 6 |
| |
| #define GCK_ID_I2S0 54 |
| #define GCK_ID_I2S1 55 |
| #define GCK_ID_CLASSD 59 |
| |
| static void __init of_sama5d2_clk_generated_setup(struct device_node *np) |
| { |
| int num; |
| u32 id; |
| const char *name; |
| struct clk_hw *hw; |
| unsigned int num_parents; |
| const char *parent_names[GENERATED_SOURCE_MAX]; |
| struct device_node *gcknp, *parent_np; |
| struct clk_range range = CLK_RANGE(0, 0); |
| struct regmap *regmap; |
| |
| num_parents = of_clk_get_parent_count(np); |
| if (num_parents == 0 || num_parents > GENERATED_SOURCE_MAX) |
| return; |
| |
| of_clk_parent_fill(np, parent_names, num_parents); |
| |
| num = of_get_child_count(np); |
| if (!num || num > PERIPHERAL_MAX) |
| return; |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| for_each_child_of_node(np, gcknp) { |
| int chg_pid = INT_MIN; |
| |
| if (of_property_read_u32(gcknp, "reg", &id)) |
| continue; |
| |
| if (id < PERIPHERAL_ID_MIN || id >= PERIPHERAL_MAX) |
| continue; |
| |
| if (of_property_read_string(np, "clock-output-names", &name)) |
| name = gcknp->name; |
| |
| of_at91_get_clk_range(gcknp, "atmel,clk-output-range", |
| &range); |
| |
| if (of_device_is_compatible(np, "atmel,sama5d2-clk-generated") && |
| (id == GCK_ID_I2S0 || id == GCK_ID_I2S1 || |
| id == GCK_ID_CLASSD)) |
| chg_pid = GCK_INDEX_DT_AUDIO_PLL; |
| |
| hw = at91_clk_register_generated(regmap, &pmc_pcr_lock, |
| &dt_pcr_layout, name, |
| parent_names, NULL, |
| num_parents, id, &range, |
| chg_pid); |
| if (IS_ERR(hw)) |
| continue; |
| |
| of_clk_add_hw_provider(gcknp, of_clk_hw_simple_get, hw); |
| } |
| } |
| CLK_OF_DECLARE(of_sama5d2_clk_generated_setup, "atmel,sama5d2-clk-generated", |
| of_sama5d2_clk_generated_setup); |
| #endif /* CONFIG_HAVE_AT91_GENERATED_CLK */ |
| |
| #ifdef CONFIG_HAVE_AT91_H32MX |
| static void __init of_sama5d4_clk_h32mx_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| const char *name = np->name; |
| const char *parent_name; |
| struct regmap *regmap; |
| struct device_node *parent_np; |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| parent_name = of_clk_get_parent_name(np, 0); |
| |
| hw = at91_clk_register_h32mx(regmap, name, parent_name); |
| if (IS_ERR(hw)) |
| return; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(of_sama5d4_clk_h32mx_setup, "atmel,sama5d4-clk-h32mx", |
| of_sama5d4_clk_h32mx_setup); |
| #endif /* CONFIG_HAVE_AT91_H32MX */ |
| |
| #ifdef CONFIG_HAVE_AT91_I2S_MUX_CLK |
| #define I2S_BUS_NR 2 |
| |
| static void __init of_sama5d2_clk_i2s_mux_setup(struct device_node *np) |
| { |
| struct regmap *regmap_sfr; |
| u8 bus_id; |
| const char *parent_names[2]; |
| struct device_node *i2s_mux_np; |
| struct clk_hw *hw; |
| int ret; |
| |
| regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr"); |
| if (IS_ERR(regmap_sfr)) |
| return; |
| |
| for_each_child_of_node(np, i2s_mux_np) { |
| if (of_property_read_u8(i2s_mux_np, "reg", &bus_id)) |
| continue; |
| |
| if (bus_id > I2S_BUS_NR) |
| continue; |
| |
| ret = of_clk_parent_fill(i2s_mux_np, parent_names, 2); |
| if (ret != 2) |
| continue; |
| |
| hw = at91_clk_i2s_mux_register(regmap_sfr, i2s_mux_np->name, |
| parent_names, 2, bus_id); |
| if (IS_ERR(hw)) |
| continue; |
| |
| of_clk_add_hw_provider(i2s_mux_np, of_clk_hw_simple_get, hw); |
| } |
| } |
| CLK_OF_DECLARE(sama5d2_clk_i2s_mux, "atmel,sama5d2-clk-i2s-mux", |
| of_sama5d2_clk_i2s_mux_setup); |
| #endif /* CONFIG_HAVE_AT91_I2S_MUX_CLK */ |
| |
| static void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| const char *name = np->name; |
| const char *parent_name; |
| struct regmap *regmap; |
| bool bypass; |
| struct device_node *parent_np; |
| |
| of_property_read_string(np, "clock-output-names", &name); |
| bypass = of_property_read_bool(np, "atmel,osc-bypass"); |
| parent_name = of_clk_get_parent_name(np, 0); |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| hw = at91_clk_register_main_osc(regmap, name, parent_name, bypass); |
| if (IS_ERR(hw)) |
| return; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(at91rm9200_clk_main_osc, "atmel,at91rm9200-clk-main-osc", |
| of_at91rm9200_clk_main_osc_setup); |
| |
| static void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| u32 frequency = 0; |
| u32 accuracy = 0; |
| const char *name = np->name; |
| struct regmap *regmap; |
| struct device_node *parent_np; |
| |
| of_property_read_string(np, "clock-output-names", &name); |
| of_property_read_u32(np, "clock-frequency", &frequency); |
| of_property_read_u32(np, "clock-accuracy", &accuracy); |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| hw = at91_clk_register_main_rc_osc(regmap, name, frequency, accuracy); |
| if (IS_ERR(hw)) |
| return; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(at91sam9x5_clk_main_rc_osc, "atmel,at91sam9x5-clk-main-rc-osc", |
| of_at91sam9x5_clk_main_rc_osc_setup); |
| |
| static void __init of_at91rm9200_clk_main_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| const char *parent_name; |
| const char *name = np->name; |
| struct regmap *regmap; |
| struct device_node *parent_np; |
| |
| parent_name = of_clk_get_parent_name(np, 0); |
| of_property_read_string(np, "clock-output-names", &name); |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| hw = at91_clk_register_rm9200_main(regmap, name, parent_name); |
| if (IS_ERR(hw)) |
| return; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(at91rm9200_clk_main, "atmel,at91rm9200-clk-main", |
| of_at91rm9200_clk_main_setup); |
| |
| static void __init of_at91sam9x5_clk_main_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| const char *parent_names[2]; |
| unsigned int num_parents; |
| const char *name = np->name; |
| struct regmap *regmap; |
| struct device_node *parent_np; |
| |
| num_parents = of_clk_get_parent_count(np); |
| if (num_parents == 0 || num_parents > 2) |
| return; |
| |
| of_clk_parent_fill(np, parent_names, num_parents); |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| of_property_read_string(np, "clock-output-names", &name); |
| |
| hw = at91_clk_register_sam9x5_main(regmap, name, parent_names, |
| num_parents); |
| if (IS_ERR(hw)) |
| return; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(at91sam9x5_clk_main, "atmel,at91sam9x5-clk-main", |
| of_at91sam9x5_clk_main_setup); |
| |
| static struct clk_master_characteristics * __init |
| of_at91_clk_master_get_characteristics(struct device_node *np) |
| { |
| struct clk_master_characteristics *characteristics; |
| |
| characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL); |
| if (!characteristics) |
| return NULL; |
| |
| if (of_at91_get_clk_range(np, "atmel,clk-output-range", &characteristics->output)) |
| goto out_free_characteristics; |
| |
| of_property_read_u32_array(np, "atmel,clk-divisors", |
| characteristics->divisors, 4); |
| |
| characteristics->have_div3_pres = |
| of_property_read_bool(np, "atmel,master-clk-have-div3-pres"); |
| |
| return characteristics; |
| |
| out_free_characteristics: |
| kfree(characteristics); |
| return NULL; |
| } |
| |
| static void __init |
| of_at91_clk_master_setup(struct device_node *np, |
| const struct clk_master_layout *layout) |
| { |
| struct clk_hw *hw; |
| unsigned int num_parents; |
| const char *parent_names[MASTER_SOURCE_MAX]; |
| const char *name = np->name; |
| struct clk_master_characteristics *characteristics; |
| struct regmap *regmap; |
| struct device_node *parent_np; |
| |
| num_parents = of_clk_get_parent_count(np); |
| if (num_parents == 0 || num_parents > MASTER_SOURCE_MAX) |
| return; |
| |
| of_clk_parent_fill(np, parent_names, num_parents); |
| |
| of_property_read_string(np, "clock-output-names", &name); |
| |
| characteristics = of_at91_clk_master_get_characteristics(np); |
| if (!characteristics) |
| return; |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| hw = at91_clk_register_master_pres(regmap, "masterck_pres", num_parents, |
| parent_names, layout, |
| characteristics, &mck_lock); |
| if (IS_ERR(hw)) |
| goto out_free_characteristics; |
| |
| hw = at91_clk_register_master_div(regmap, name, "masterck_pres", |
| layout, characteristics, |
| &mck_lock, CLK_SET_RATE_GATE, 0); |
| if (IS_ERR(hw)) |
| goto out_free_characteristics; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| return; |
| |
| out_free_characteristics: |
| kfree(characteristics); |
| } |
| |
| static void __init of_at91rm9200_clk_master_setup(struct device_node *np) |
| { |
| of_at91_clk_master_setup(np, &at91rm9200_master_layout); |
| } |
| CLK_OF_DECLARE(at91rm9200_clk_master, "atmel,at91rm9200-clk-master", |
| of_at91rm9200_clk_master_setup); |
| |
| static void __init of_at91sam9x5_clk_master_setup(struct device_node *np) |
| { |
| of_at91_clk_master_setup(np, &at91sam9x5_master_layout); |
| } |
| CLK_OF_DECLARE(at91sam9x5_clk_master, "atmel,at91sam9x5-clk-master", |
| of_at91sam9x5_clk_master_setup); |
| |
| static void __init |
| of_at91_clk_periph_setup(struct device_node *np, u8 type) |
| { |
| int num; |
| u32 id; |
| struct clk_hw *hw; |
| const char *parent_name; |
| const char *name; |
| struct device_node *periphclknp; |
| struct regmap *regmap; |
| struct device_node *parent_np; |
| |
| parent_name = of_clk_get_parent_name(np, 0); |
| if (!parent_name) |
| return; |
| |
| num = of_get_child_count(np); |
| if (!num || num > PERIPHERAL_MAX) |
| return; |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| for_each_child_of_node(np, periphclknp) { |
| if (of_property_read_u32(periphclknp, "reg", &id)) |
| continue; |
| |
| if (id >= PERIPHERAL_MAX) |
| continue; |
| |
| if (of_property_read_string(np, "clock-output-names", &name)) |
| name = periphclknp->name; |
| |
| if (type == PERIPHERAL_AT91RM9200) { |
| hw = at91_clk_register_peripheral(regmap, name, |
| parent_name, id); |
| } else { |
| struct clk_range range = CLK_RANGE(0, 0); |
| unsigned long flags = 0; |
| |
| of_at91_get_clk_range(periphclknp, |
| "atmel,clk-output-range", |
| &range); |
| |
| /* |
| * mpddr_clk feed DDR controller and is enabled by |
| * bootloader thus we need to keep it enabled in case |
| * there is no Linux consumer for it. |
| */ |
| if (!strcmp(periphclknp->name, "mpddr_clk")) |
| flags = CLK_IS_CRITICAL; |
| |
| hw = at91_clk_register_sam9x5_peripheral(regmap, |
| &pmc_pcr_lock, |
| &dt_pcr_layout, |
| name, |
| parent_name, |
| id, &range, |
| INT_MIN, |
| flags); |
| } |
| |
| if (IS_ERR(hw)) |
| continue; |
| |
| of_clk_add_hw_provider(periphclknp, of_clk_hw_simple_get, hw); |
| } |
| } |
| |
| static void __init of_at91rm9200_clk_periph_setup(struct device_node *np) |
| { |
| of_at91_clk_periph_setup(np, PERIPHERAL_AT91RM9200); |
| } |
| CLK_OF_DECLARE(at91rm9200_clk_periph, "atmel,at91rm9200-clk-peripheral", |
| of_at91rm9200_clk_periph_setup); |
| |
| static void __init of_at91sam9x5_clk_periph_setup(struct device_node *np) |
| { |
| of_at91_clk_periph_setup(np, PERIPHERAL_AT91SAM9X5); |
| } |
| CLK_OF_DECLARE(at91sam9x5_clk_periph, "atmel,at91sam9x5-clk-peripheral", |
| of_at91sam9x5_clk_periph_setup); |
| |
| static struct clk_pll_characteristics * __init |
| of_at91_clk_pll_get_characteristics(struct device_node *np) |
| { |
| int i; |
| int offset; |
| u32 tmp; |
| int num_output; |
| u32 num_cells; |
| struct clk_range input; |
| struct clk_range *output; |
| u8 *out = NULL; |
| u16 *icpll = NULL; |
| struct clk_pll_characteristics *characteristics; |
| |
| if (of_at91_get_clk_range(np, "atmel,clk-input-range", &input)) |
| return NULL; |
| |
| if (of_property_read_u32(np, "#atmel,pll-clk-output-range-cells", |
| &num_cells)) |
| return NULL; |
| |
| if (num_cells < 2 || num_cells > 4) |
| return NULL; |
| |
| if (!of_get_property(np, "atmel,pll-clk-output-ranges", &tmp)) |
| return NULL; |
| num_output = tmp / (sizeof(u32) * num_cells); |
| |
| characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL); |
| if (!characteristics) |
| return NULL; |
| |
| output = kcalloc(num_output, sizeof(*output), GFP_KERNEL); |
| if (!output) |
| goto out_free_characteristics; |
| |
| if (num_cells > 2) { |
| out = kcalloc(num_output, sizeof(*out), GFP_KERNEL); |
| if (!out) |
| goto out_free_output; |
| } |
| |
| if (num_cells > 3) { |
| icpll = kcalloc(num_output, sizeof(*icpll), GFP_KERNEL); |
| if (!icpll) |
| goto out_free_output; |
| } |
| |
| for (i = 0; i < num_output; i++) { |
| offset = i * num_cells; |
| if (of_property_read_u32_index(np, |
| "atmel,pll-clk-output-ranges", |
| offset, &tmp)) |
| goto out_free_output; |
| output[i].min = tmp; |
| if (of_property_read_u32_index(np, |
| "atmel,pll-clk-output-ranges", |
| offset + 1, &tmp)) |
| goto out_free_output; |
| output[i].max = tmp; |
| |
| if (num_cells == 2) |
| continue; |
| |
| if (of_property_read_u32_index(np, |
| "atmel,pll-clk-output-ranges", |
| offset + 2, &tmp)) |
| goto out_free_output; |
| out[i] = tmp; |
| |
| if (num_cells == 3) |
| continue; |
| |
| if (of_property_read_u32_index(np, |
| "atmel,pll-clk-output-ranges", |
| offset + 3, &tmp)) |
| goto out_free_output; |
| icpll[i] = tmp; |
| } |
| |
| characteristics->input = input; |
| characteristics->num_output = num_output; |
| characteristics->output = output; |
| characteristics->out = out; |
| characteristics->icpll = icpll; |
| return characteristics; |
| |
| out_free_output: |
| kfree(icpll); |
| kfree(out); |
| kfree(output); |
| out_free_characteristics: |
| kfree(characteristics); |
| return NULL; |
| } |
| |
| static void __init |
| of_at91_clk_pll_setup(struct device_node *np, |
| const struct clk_pll_layout *layout) |
| { |
| u32 id; |
| struct clk_hw *hw; |
| struct regmap *regmap; |
| const char *parent_name; |
| const char *name = np->name; |
| struct device_node *parent_np; |
| struct clk_pll_characteristics *characteristics; |
| |
| if (of_property_read_u32(np, "reg", &id)) |
| return; |
| |
| parent_name = of_clk_get_parent_name(np, 0); |
| |
| of_property_read_string(np, "clock-output-names", &name); |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| characteristics = of_at91_clk_pll_get_characteristics(np); |
| if (!characteristics) |
| return; |
| |
| hw = at91_clk_register_pll(regmap, name, parent_name, id, layout, |
| characteristics); |
| if (IS_ERR(hw)) |
| goto out_free_characteristics; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| return; |
| |
| out_free_characteristics: |
| kfree(characteristics); |
| } |
| |
| static void __init of_at91rm9200_clk_pll_setup(struct device_node *np) |
| { |
| of_at91_clk_pll_setup(np, &at91rm9200_pll_layout); |
| } |
| CLK_OF_DECLARE(at91rm9200_clk_pll, "atmel,at91rm9200-clk-pll", |
| of_at91rm9200_clk_pll_setup); |
| |
| static void __init of_at91sam9g45_clk_pll_setup(struct device_node *np) |
| { |
| of_at91_clk_pll_setup(np, &at91sam9g45_pll_layout); |
| } |
| CLK_OF_DECLARE(at91sam9g45_clk_pll, "atmel,at91sam9g45-clk-pll", |
| of_at91sam9g45_clk_pll_setup); |
| |
| static void __init of_at91sam9g20_clk_pllb_setup(struct device_node *np) |
| { |
| of_at91_clk_pll_setup(np, &at91sam9g20_pllb_layout); |
| } |
| CLK_OF_DECLARE(at91sam9g20_clk_pllb, "atmel,at91sam9g20-clk-pllb", |
| of_at91sam9g20_clk_pllb_setup); |
| |
| static void __init of_sama5d3_clk_pll_setup(struct device_node *np) |
| { |
| of_at91_clk_pll_setup(np, &sama5d3_pll_layout); |
| } |
| CLK_OF_DECLARE(sama5d3_clk_pll, "atmel,sama5d3-clk-pll", |
| of_sama5d3_clk_pll_setup); |
| |
| static void __init |
| of_at91sam9x5_clk_plldiv_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| const char *parent_name; |
| const char *name = np->name; |
| struct regmap *regmap; |
| struct device_node *parent_np; |
| |
| parent_name = of_clk_get_parent_name(np, 0); |
| |
| of_property_read_string(np, "clock-output-names", &name); |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| hw = at91_clk_register_plldiv(regmap, name, parent_name); |
| if (IS_ERR(hw)) |
| return; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(at91sam9x5_clk_plldiv, "atmel,at91sam9x5-clk-plldiv", |
| of_at91sam9x5_clk_plldiv_setup); |
| |
| static void __init |
| of_at91_clk_prog_setup(struct device_node *np, |
| const struct clk_programmable_layout *layout, |
| u32 *mux_table) |
| { |
| int num; |
| u32 id; |
| struct clk_hw *hw; |
| unsigned int num_parents; |
| const char *parent_names[PROG_SOURCE_MAX]; |
| const char *name; |
| struct device_node *progclknp, *parent_np; |
| struct regmap *regmap; |
| |
| num_parents = of_clk_get_parent_count(np); |
| if (num_parents == 0 || num_parents > PROG_SOURCE_MAX) |
| return; |
| |
| of_clk_parent_fill(np, parent_names, num_parents); |
| |
| num = of_get_child_count(np); |
| if (!num || num > (PROG_ID_MAX + 1)) |
| return; |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| for_each_child_of_node(np, progclknp) { |
| if (of_property_read_u32(progclknp, "reg", &id)) |
| continue; |
| |
| if (of_property_read_string(np, "clock-output-names", &name)) |
| name = progclknp->name; |
| |
| hw = at91_clk_register_programmable(regmap, name, |
| parent_names, num_parents, |
| id, layout, mux_table); |
| if (IS_ERR(hw)) |
| continue; |
| |
| of_clk_add_hw_provider(progclknp, of_clk_hw_simple_get, hw); |
| } |
| } |
| |
| static void __init of_at91rm9200_clk_prog_setup(struct device_node *np) |
| { |
| of_at91_clk_prog_setup(np, &at91rm9200_programmable_layout, NULL); |
| } |
| CLK_OF_DECLARE(at91rm9200_clk_prog, "atmel,at91rm9200-clk-programmable", |
| of_at91rm9200_clk_prog_setup); |
| |
| static void __init of_at91sam9g45_clk_prog_setup(struct device_node *np) |
| { |
| of_at91_clk_prog_setup(np, &at91sam9g45_programmable_layout, NULL); |
| } |
| CLK_OF_DECLARE(at91sam9g45_clk_prog, "atmel,at91sam9g45-clk-programmable", |
| of_at91sam9g45_clk_prog_setup); |
| |
| static void __init of_at91sam9x5_clk_prog_setup(struct device_node *np) |
| { |
| of_at91_clk_prog_setup(np, &at91sam9x5_programmable_layout, NULL); |
| } |
| CLK_OF_DECLARE(at91sam9x5_clk_prog, "atmel,at91sam9x5-clk-programmable", |
| of_at91sam9x5_clk_prog_setup); |
| |
| static void __init of_at91sam9260_clk_slow_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| const char *parent_names[2]; |
| unsigned int num_parents; |
| const char *name = np->name; |
| struct regmap *regmap; |
| struct device_node *parent_np; |
| |
| num_parents = of_clk_get_parent_count(np); |
| if (num_parents != 2) |
| return; |
| |
| of_clk_parent_fill(np, parent_names, num_parents); |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| of_property_read_string(np, "clock-output-names", &name); |
| |
| hw = at91_clk_register_sam9260_slow(regmap, name, parent_names, |
| num_parents); |
| if (IS_ERR(hw)) |
| return; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(at91sam9260_clk_slow, "atmel,at91sam9260-clk-slow", |
| of_at91sam9260_clk_slow_setup); |
| |
| #ifdef CONFIG_HAVE_AT91_SMD |
| #define SMD_SOURCE_MAX 2 |
| |
| static void __init of_at91sam9x5_clk_smd_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| unsigned int num_parents; |
| const char *parent_names[SMD_SOURCE_MAX]; |
| const char *name = np->name; |
| struct regmap *regmap; |
| struct device_node *parent_np; |
| |
| num_parents = of_clk_get_parent_count(np); |
| if (num_parents == 0 || num_parents > SMD_SOURCE_MAX) |
| return; |
| |
| of_clk_parent_fill(np, parent_names, num_parents); |
| |
| of_property_read_string(np, "clock-output-names", &name); |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| hw = at91sam9x5_clk_register_smd(regmap, name, parent_names, |
| num_parents); |
| if (IS_ERR(hw)) |
| return; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(at91sam9x5_clk_smd, "atmel,at91sam9x5-clk-smd", |
| of_at91sam9x5_clk_smd_setup); |
| #endif /* CONFIG_HAVE_AT91_SMD */ |
| |
| static void __init of_at91rm9200_clk_sys_setup(struct device_node *np) |
| { |
| int num; |
| u32 id; |
| struct clk_hw *hw; |
| const char *name; |
| struct device_node *sysclknp, *parent_np; |
| const char *parent_name; |
| struct regmap *regmap; |
| |
| num = of_get_child_count(np); |
| if (num > (SYSTEM_MAX_ID + 1)) |
| return; |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| for_each_child_of_node(np, sysclknp) { |
| unsigned long flags = 0; |
| |
| if (of_property_read_u32(sysclknp, "reg", &id)) |
| continue; |
| |
| if (of_property_read_string(np, "clock-output-names", &name)) |
| name = sysclknp->name; |
| |
| parent_name = of_clk_get_parent_name(sysclknp, 0); |
| |
| /* |
| * ddrck feeds DDR controller and is enabled by bootloader thus |
| * we need to keep it enabled in case there is no Linux consumer |
| * for it. |
| */ |
| if (!strcmp(sysclknp->name, "ddrck")) |
| flags = CLK_IS_CRITICAL; |
| |
| hw = at91_clk_register_system(regmap, name, parent_name, id, |
| flags); |
| if (IS_ERR(hw)) |
| continue; |
| |
| of_clk_add_hw_provider(sysclknp, of_clk_hw_simple_get, hw); |
| } |
| } |
| CLK_OF_DECLARE(at91rm9200_clk_sys, "atmel,at91rm9200-clk-system", |
| of_at91rm9200_clk_sys_setup); |
| |
| #ifdef CONFIG_HAVE_AT91_USB_CLK |
| #define USB_SOURCE_MAX 2 |
| |
| static void __init of_at91sam9x5_clk_usb_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| unsigned int num_parents; |
| const char *parent_names[USB_SOURCE_MAX]; |
| const char *name = np->name; |
| struct regmap *regmap; |
| struct device_node *parent_np; |
| |
| num_parents = of_clk_get_parent_count(np); |
| if (num_parents == 0 || num_parents > USB_SOURCE_MAX) |
| return; |
| |
| of_clk_parent_fill(np, parent_names, num_parents); |
| |
| of_property_read_string(np, "clock-output-names", &name); |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| hw = at91sam9x5_clk_register_usb(regmap, name, parent_names, |
| num_parents); |
| if (IS_ERR(hw)) |
| return; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(at91sam9x5_clk_usb, "atmel,at91sam9x5-clk-usb", |
| of_at91sam9x5_clk_usb_setup); |
| |
| static void __init of_at91sam9n12_clk_usb_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| const char *parent_name; |
| const char *name = np->name; |
| struct regmap *regmap; |
| struct device_node *parent_np; |
| |
| parent_name = of_clk_get_parent_name(np, 0); |
| if (!parent_name) |
| return; |
| |
| of_property_read_string(np, "clock-output-names", &name); |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| hw = at91sam9n12_clk_register_usb(regmap, name, parent_name); |
| if (IS_ERR(hw)) |
| return; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(at91sam9n12_clk_usb, "atmel,at91sam9n12-clk-usb", |
| of_at91sam9n12_clk_usb_setup); |
| |
| static void __init of_at91rm9200_clk_usb_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| const char *parent_name; |
| const char *name = np->name; |
| u32 divisors[4] = {0, 0, 0, 0}; |
| struct regmap *regmap; |
| struct device_node *parent_np; |
| |
| parent_name = of_clk_get_parent_name(np, 0); |
| if (!parent_name) |
| return; |
| |
| of_property_read_u32_array(np, "atmel,clk-divisors", divisors, 4); |
| if (!divisors[0]) |
| return; |
| |
| of_property_read_string(np, "clock-output-names", &name); |
| |
| parent_np = of_get_parent(np); |
| regmap = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap)) |
| return; |
| hw = at91rm9200_clk_register_usb(regmap, name, parent_name, divisors); |
| if (IS_ERR(hw)) |
| return; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(at91rm9200_clk_usb, "atmel,at91rm9200-clk-usb", |
| of_at91rm9200_clk_usb_setup); |
| #endif /* CONFIG_HAVE_AT91_USB_CLK */ |
| |
| #ifdef CONFIG_HAVE_AT91_UTMI |
| static void __init of_at91sam9x5_clk_utmi_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| const char *parent_name; |
| const char *name = np->name; |
| struct regmap *regmap_pmc, *regmap_sfr; |
| struct device_node *parent_np; |
| |
| parent_name = of_clk_get_parent_name(np, 0); |
| |
| of_property_read_string(np, "clock-output-names", &name); |
| |
| parent_np = of_get_parent(np); |
| regmap_pmc = syscon_node_to_regmap(parent_np); |
| of_node_put(parent_np); |
| if (IS_ERR(regmap_pmc)) |
| return; |
| |
| /* |
| * If the device supports different mainck rates, this value has to be |
| * set in the UTMI Clock Trimming register. |
| * - 9x5: mainck supports several rates but it is indicated that a |
| * 12 MHz is needed in case of USB. |
| * - sama5d3 and sama5d2: mainck supports several rates. Configuring |
| * the FREQ field of the UTMI Clock Trimming register is mandatory. |
| * - sama5d4: mainck is at 12 MHz. |
| * |
| * We only need to retrieve sama5d3 or sama5d2 sfr regmap. |
| */ |
| regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d3-sfr"); |
| if (IS_ERR(regmap_sfr)) { |
| regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr"); |
| if (IS_ERR(regmap_sfr)) |
| regmap_sfr = NULL; |
| } |
| |
| hw = at91_clk_register_utmi(regmap_pmc, regmap_sfr, name, parent_name); |
| if (IS_ERR(hw)) |
| return; |
| |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(at91sam9x5_clk_utmi, "atmel,at91sam9x5-clk-utmi", |
| of_at91sam9x5_clk_utmi_setup); |
| #endif /* CONFIG_HAVE_AT91_UTMI */ |