drivers/power/supply/sc2731_charger.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 // Copyright (C) 2018 Spreadtrum Communications Inc.

 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/usb/phy.h>
 #include <linux/regmap.h>
 #include <linux/notifier.h>
 #include <linux/of.h>

 /* PMIC global registers definition */
 #define SC2731_CHARGE_STATUS		0xedc
 #define SC2731_CHARGE_FULL		BIT(4)
 #define SC2731_MODULE_EN1		0xc0c
 #define SC2731_CHARGE_EN		BIT(5)

 /* SC2731 switch charger registers definition */
 #define SC2731_CHG_CFG0			0x0
 #define SC2731_CHG_CFG1			0x4
 #define SC2731_CHG_CFG2			0x8
 #define SC2731_CHG_CFG3			0xc
 #define SC2731_CHG_CFG4			0x10
 #define SC2731_CHG_CFG5			0x28

 /* SC2731_CHG_CFG0 register definition */
 #define SC2731_PRECHG_RNG_SHIFT		11
 #define SC2731_PRECHG_RNG_MASK		GENMASK(12, 11)

 #define SC2731_TERMINATION_VOL_MASK	GENMASK(2, 1)
 #define SC2731_TERMINATION_VOL_SHIFT	1
 #define SC2731_TERMINATION_VOL_CAL_MASK	GENMASK(8, 3)
 #define SC2731_TERMINATION_VOL_CAL_SHIFT	3
 #define SC2731_TERMINATION_CUR_MASK	GENMASK(2, 0)

 #define SC2731_CC_EN			BIT(13)
 #define SC2731_CHARGER_PD		BIT(0)

 /* SC2731_CHG_CFG1 register definition */
 #define SC2731_CUR_MASK			GENMASK(5, 0)

 /* SC2731_CHG_CFG5 register definition */
 #define SC2731_CUR_LIMIT_SHIFT		8
 #define SC2731_CUR_LIMIT_MASK		GENMASK(9, 8)

 /* Default current definition (unit is mA) */
 #define SC2731_CURRENT_LIMIT_100	100
 #define SC2731_CURRENT_LIMIT_500	500
 #define SC2731_CURRENT_LIMIT_900	900
 #define SC2731_CURRENT_LIMIT_2000	2000
 #define SC2731_CURRENT_PRECHG		450
 #define SC2731_CURRENT_STEP		50

 struct sc2731_charger_info {
 	struct device *dev;
 	struct regmap *regmap;
 	struct usb_phy *usb_phy;
 	struct notifier_block usb_notify;
 	struct power_supply *psy_usb;
 	struct work_struct work;
 	struct mutex lock;
 	bool charging;
 	u32 base;
 	u32 limit;
 };

 static void sc2731_charger_stop_charge(struct sc2731_charger_info *info)
 {
 	regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
 			   SC2731_CC_EN, 0);

 	regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
 			   SC2731_CHARGER_PD, SC2731_CHARGER_PD);
 }

 static int sc2731_charger_start_charge(struct sc2731_charger_info *info)
 {
 	int ret;

 	/* Enable charger constant current mode */
 	ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
 				 SC2731_CC_EN, SC2731_CC_EN);
 	if (ret)
 		return ret;

 	/* Start charging */
 	return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
 				  SC2731_CHARGER_PD, 0);
 }

 static int sc2731_charger_set_current_limit(struct sc2731_charger_info *info,
 					    u32 limit)
 {
 	u32 val;

 	if (limit <= SC2731_CURRENT_LIMIT_100)
 		val = 0;
 	else if (limit <= SC2731_CURRENT_LIMIT_500)
 		val = 3;
 	else if (limit <= SC2731_CURRENT_LIMIT_900)
 		val = 2;
 	else
 		val = 1;

 	return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG5,
 				  SC2731_CUR_LIMIT_MASK,
 				  val << SC2731_CUR_LIMIT_SHIFT);
 }

 static int sc2731_charger_set_current(struct sc2731_charger_info *info, u32 cur)
 {
 	u32 val;
 	int ret;

 	if (cur > SC2731_CURRENT_LIMIT_2000)
 		cur = SC2731_CURRENT_LIMIT_2000;
 	else if (cur < SC2731_CURRENT_PRECHG)
 		cur = SC2731_CURRENT_PRECHG;

 	/* Calculate the step value, each step is 50 mA */
 	val = (cur - SC2731_CURRENT_PRECHG) / SC2731_CURRENT_STEP;

 	/* Set pre-charge current as 450 mA */
 	ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
 				 SC2731_PRECHG_RNG_MASK,
 				 0x3 << SC2731_PRECHG_RNG_SHIFT);
 	if (ret)
 		return ret;

 	return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG1,
 				  SC2731_CUR_MASK, val);
 }

 static int sc2731_charger_get_status(struct sc2731_charger_info *info)
 {
 	u32 val;
 	int ret;

 	ret = regmap_read(info->regmap, SC2731_CHARGE_STATUS, &val);
 	if (ret)
 		return ret;

 	if (val & SC2731_CHARGE_FULL)
 		return POWER_SUPPLY_STATUS_FULL;

 	return POWER_SUPPLY_STATUS_CHARGING;
 }

 static int sc2731_charger_get_current(struct sc2731_charger_info *info,
 				      u32 *cur)
 {
 	int ret;
 	u32 val;

 	ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG1, &val);
 	if (ret)
 		return ret;

 	val &= SC2731_CUR_MASK;
 	*cur = val * SC2731_CURRENT_STEP + SC2731_CURRENT_PRECHG;

 	return 0;
 }

 static int sc2731_charger_get_current_limit(struct sc2731_charger_info *info,
 					    u32 *cur)
 {
 	int ret;
 	u32 val;

 	ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG5, &val);
 	if (ret)
 		return ret;

 	val = (val & SC2731_CUR_LIMIT_MASK) >> SC2731_CUR_LIMIT_SHIFT;

 	switch (val) {
 	case 0:
 		*cur = SC2731_CURRENT_LIMIT_100;
 		break;

 	case 1:
 		*cur = SC2731_CURRENT_LIMIT_2000;
 		break;

 	case 2:
 		*cur = SC2731_CURRENT_LIMIT_900;
 		break;

 	case 3:
 		*cur = SC2731_CURRENT_LIMIT_500;
 		break;

 	default:
 		return -EINVAL;
 	}

 	return 0;
 }

 static int
 sc2731_charger_usb_set_property(struct power_supply *psy,
 				enum power_supply_property psp,
 				const union power_supply_propval *val)
 {
 	struct sc2731_charger_info *info = power_supply_get_drvdata(psy);
 	int ret;

 	mutex_lock(&info->lock);

 	if (!info->charging) {
 		mutex_unlock(&info->lock);
 		return -ENODEV;
 	}

 	switch (psp) {
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 		ret = sc2731_charger_set_current(info, val->intval / 1000);
 		if (ret < 0)
 			dev_err(info->dev, "set charge current failed\n");
 		break;

 	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 		ret = sc2731_charger_set_current_limit(info,
 						       val->intval / 1000);
 		if (ret < 0)
 			dev_err(info->dev, "set input current limit failed\n");
 		break;

 	default:
 		ret = -EINVAL;
 	}

 	mutex_unlock(&info->lock);
 	return ret;
 }

 static int sc2731_charger_usb_get_property(struct power_supply *psy,
 					   enum power_supply_property psp,
 					   union power_supply_propval *val)
 {
 	struct sc2731_charger_info *info = power_supply_get_drvdata(psy);
 	int ret = 0;
 	u32 cur;

 	mutex_lock(&info->lock);

 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
 		if (info->charging)
 			val->intval = sc2731_charger_get_status(info);
 		else
 			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		break;

 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 		if (!info->charging) {
 			val->intval = 0;
 		} else {
 			ret = sc2731_charger_get_current(info, &cur);
 			if (ret)
 				goto out;

 			val->intval = cur * 1000;
 		}
 		break;

 	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 		if (!info->charging) {
 			val->intval = 0;
 		} else {
 			ret = sc2731_charger_get_current_limit(info, &cur);
 			if (ret)
 				goto out;

 			val->intval = cur * 1000;
 		}
 		break;

 	default:
 		ret = -EINVAL;
 	}

 out:
 	mutex_unlock(&info->lock);
 	return ret;
 }

 static int sc2731_charger_property_is_writeable(struct power_supply *psy,
 						enum power_supply_property psp)
 {
 	int ret;

 	switch (psp) {
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 		ret = 1;
 		break;

 	default:
 		ret = 0;
 	}

 	return ret;
 }

 static enum power_supply_property sc2731_usb_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
 	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
 };

 static const struct power_supply_desc sc2731_charger_desc = {
 	.name			= "sc2731_charger",
 	.type			= POWER_SUPPLY_TYPE_USB,
 	.properties		= sc2731_usb_props,
 	.num_properties		= ARRAY_SIZE(sc2731_usb_props),
 	.get_property		= sc2731_charger_usb_get_property,
 	.set_property		= sc2731_charger_usb_set_property,
 	.property_is_writeable	= sc2731_charger_property_is_writeable,
 };

 static void sc2731_charger_work(struct work_struct *data)
 {
 	struct sc2731_charger_info *info =
 		container_of(data, struct sc2731_charger_info, work);
 	int ret;

 	mutex_lock(&info->lock);

 	if (info->limit > 0 && !info->charging) {
 		/* set current limitation and start to charge */
 		ret = sc2731_charger_set_current_limit(info, info->limit);
 		if (ret)
 			goto out;

 		ret = sc2731_charger_set_current(info, info->limit);
 		if (ret)
 			goto out;

 		ret = sc2731_charger_start_charge(info);
 		if (ret)
 			goto out;

 		info->charging = true;
 	} else if (!info->limit && info->charging) {
 		/* Stop charging */
 		info->charging = false;
 		sc2731_charger_stop_charge(info);
 	}

 out:
 	mutex_unlock(&info->lock);
 }

 static int sc2731_charger_usb_change(struct notifier_block *nb,
 				     unsigned long limit, void *data)
 {
 	struct sc2731_charger_info *info =
 		container_of(nb, struct sc2731_charger_info, usb_notify);

 	info->limit = limit;

 	schedule_work(&info->work);

 	return NOTIFY_OK;
 }

 static int sc2731_charger_hw_init(struct sc2731_charger_info *info)
 {
 	struct power_supply_battery_info *bat_info;
 	u32 term_currrent, term_voltage, cur_val, vol_val;
 	int ret;

 	/* Enable charger module */
 	ret = regmap_update_bits(info->regmap, SC2731_MODULE_EN1,
 				 SC2731_CHARGE_EN, SC2731_CHARGE_EN);
 	if (ret)
 		return ret;

 	ret = power_supply_get_battery_info(info->psy_usb, &bat_info);
 	if (ret) {
 		dev_warn(info->dev, "no battery information is supplied\n");

 		/*
 		 * If no battery information is supplied, we should set
 		 * default charge termination current to 120 mA, and default
 		 * charge termination voltage to 4.35V.
 		 */
 		cur_val = 0x2;
 		vol_val = 0x1;
 	} else {
 		term_currrent = bat_info->charge_term_current_ua / 1000;

 		if (term_currrent <= 90)
 			cur_val = 0;
 		else if (term_currrent >= 265)
 			cur_val = 0x7;
 		else
 			cur_val = ((term_currrent - 90) / 25) + 1;

 		term_voltage = bat_info->constant_charge_voltage_max_uv / 1000;

 		if (term_voltage > 4500)
 			term_voltage = 4500;

 		if (term_voltage > 4200)
 			vol_val = (term_voltage - 4200) / 100;
 		else
 			vol_val = 0;

 		power_supply_put_battery_info(info->psy_usb, bat_info);
 	}

 	/* Set charge termination current */
 	ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG2,
 				 SC2731_TERMINATION_CUR_MASK, cur_val);
 	if (ret)
 		goto error;

 	/* Set charge termination voltage */
 	ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
 				 SC2731_TERMINATION_VOL_MASK |
 				 SC2731_TERMINATION_VOL_CAL_MASK,
 				 (vol_val << SC2731_TERMINATION_VOL_SHIFT) |
 				 (0x6 << SC2731_TERMINATION_VOL_CAL_SHIFT));
 	if (ret)
 		goto error;

 	return 0;

 error:
 	regmap_update_bits(info->regmap, SC2731_MODULE_EN1, SC2731_CHARGE_EN, 0);
 	return ret;
 }

 static void sc2731_charger_detect_status(struct sc2731_charger_info *info)
 {
 	unsigned int min, max;

 	/*
 	 * If the USB charger status has been USB_CHARGER_PRESENT before
 	 * registering the notifier, we should start to charge with getting
 	 * the charge current.
 	 */
 	if (info->usb_phy->chg_state != USB_CHARGER_PRESENT)
 		return;

 	usb_phy_get_charger_current(info->usb_phy, &min, &max);
 	info->limit = min;

 	schedule_work(&info->work);
 }

 static int sc2731_charger_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct sc2731_charger_info *info;
 	struct power_supply_config charger_cfg = { };
 	int ret;

 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;

 	mutex_init(&info->lock);
 	info->dev = &pdev->dev;
 	INIT_WORK(&info->work, sc2731_charger_work);

 	info->regmap = dev_get_regmap(pdev->dev.parent, NULL);
 	if (!info->regmap) {
 		dev_err(&pdev->dev, "failed to get charger regmap\n");
 		return -ENODEV;
 	}

 	ret = of_property_read_u32(np, "reg", &info->base);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to get register address\n");
 		return -ENODEV;
 	}

 	charger_cfg.drv_data = info;
 	charger_cfg.of_node = np;
 	info->psy_usb = devm_power_supply_register(&pdev->dev,
 						   &sc2731_charger_desc,
 						   &charger_cfg);
 	if (IS_ERR(info->psy_usb)) {
 		dev_err(&pdev->dev, "failed to register power supply\n");
 		return PTR_ERR(info->psy_usb);
 	}

 	ret = sc2731_charger_hw_init(info);
 	if (ret)
 		return ret;

 	info->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "phys", 0);
 	if (IS_ERR(info->usb_phy)) {
 		dev_err(&pdev->dev, "failed to find USB phy\n");
 		return PTR_ERR(info->usb_phy);
 	}

 	info->usb_notify.notifier_call = sc2731_charger_usb_change;
 	ret = usb_register_notifier(info->usb_phy, &info->usb_notify);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register notifier: %d\n", ret);
 		return ret;
 	}

 	sc2731_charger_detect_status(info);

 	return 0;
 }

 static int sc2731_charger_remove(struct platform_device *pdev)
 {
 	struct sc2731_charger_info *info = platform_get_drvdata(pdev);

 	usb_unregister_notifier(info->usb_phy, &info->usb_notify);

 	return 0;
 }

 static const struct of_device_id sc2731_charger_of_match[] = {
 	{ .compatible = "sprd,sc2731-charger", },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sc2731_charger_of_match);

 static struct platform_driver sc2731_charger_driver = {
 	.driver = {
 		.name = "sc2731-charger",
 		.of_match_table = sc2731_charger_of_match,
 	},
 	.probe = sc2731_charger_probe,
 	.remove = sc2731_charger_remove,
 };

 module_platform_driver(sc2731_charger_driver);

 MODULE_DESCRIPTION("Spreadtrum SC2731 Charger Driver");
 MODULE_LICENSE("GPL v2");
	// SPDX-License-Identifier: GPL-2.0
	// Copyright (C) 2018 Spreadtrum Communications Inc.

	#include <linux/module.h>
	#include <linux/platform_device.h>
	#include <linux/power_supply.h>
	#include <linux/usb/phy.h>
	#include <linux/regmap.h>
	#include <linux/notifier.h>
	#include <linux/of.h>

	/* PMIC global registers definition */
	#define SC2731_CHARGE_STATUS 0xedc
	#define SC2731_CHARGE_FULL BIT(4)
	#define SC2731_MODULE_EN1 0xc0c
	#define SC2731_CHARGE_EN BIT(5)

	/* SC2731 switch charger registers definition */
	#define SC2731_CHG_CFG0 0x0
	#define SC2731_CHG_CFG1 0x4
	#define SC2731_CHG_CFG2 0x8
	#define SC2731_CHG_CFG3 0xc
	#define SC2731_CHG_CFG4 0x10
	#define SC2731_CHG_CFG5 0x28

	/* SC2731_CHG_CFG0 register definition */
	#define SC2731_PRECHG_RNG_SHIFT 11
	#define SC2731_PRECHG_RNG_MASK GENMASK(12, 11)

	#define SC2731_TERMINATION_VOL_MASK GENMASK(2, 1)
	#define SC2731_TERMINATION_VOL_SHIFT 1
	#define SC2731_TERMINATION_VOL_CAL_MASK GENMASK(8, 3)
	#define SC2731_TERMINATION_VOL_CAL_SHIFT 3
	#define SC2731_TERMINATION_CUR_MASK GENMASK(2, 0)

	#define SC2731_CC_EN BIT(13)
	#define SC2731_CHARGER_PD BIT(0)

	/* SC2731_CHG_CFG1 register definition */
	#define SC2731_CUR_MASK GENMASK(5, 0)

	/* SC2731_CHG_CFG5 register definition */
	#define SC2731_CUR_LIMIT_SHIFT 8
	#define SC2731_CUR_LIMIT_MASK GENMASK(9, 8)

	/* Default current definition (unit is mA) */
	#define SC2731_CURRENT_LIMIT_100 100
	#define SC2731_CURRENT_LIMIT_500 500
	#define SC2731_CURRENT_LIMIT_900 900
	#define SC2731_CURRENT_LIMIT_2000 2000
	#define SC2731_CURRENT_PRECHG 450
	#define SC2731_CURRENT_STEP 50

	struct sc2731_charger_info {
	struct device *dev;
	struct regmap *regmap;
	struct usb_phy *usb_phy;
	struct notifier_block usb_notify;
	struct power_supply *psy_usb;
	struct work_struct work;
	struct mutex lock;
	bool charging;
	u32 base;
	u32 limit;
	};

	static void sc2731_charger_stop_charge(struct sc2731_charger_info *info)
	{
	regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
	SC2731_CC_EN, 0);

	regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
	SC2731_CHARGER_PD, SC2731_CHARGER_PD);
	}

	static int sc2731_charger_start_charge(struct sc2731_charger_info *info)
	{
	int ret;

	/* Enable charger constant current mode */
	ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
	SC2731_CC_EN, SC2731_CC_EN);
	if (ret)
	return ret;

	/* Start charging */
	return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
	SC2731_CHARGER_PD, 0);
	}

	static int sc2731_charger_set_current_limit(struct sc2731_charger_info *info,
	u32 limit)
	{
	u32 val;

	if (limit <= SC2731_CURRENT_LIMIT_100)
	val = 0;
	else if (limit <= SC2731_CURRENT_LIMIT_500)
	val = 3;
	else if (limit <= SC2731_CURRENT_LIMIT_900)
	val = 2;
	else
	val = 1;

	return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG5,
	SC2731_CUR_LIMIT_MASK,
	val << SC2731_CUR_LIMIT_SHIFT);
	}

	static int sc2731_charger_set_current(struct sc2731_charger_info *info, u32 cur)
	{
	u32 val;
	int ret;

	if (cur > SC2731_CURRENT_LIMIT_2000)
	cur = SC2731_CURRENT_LIMIT_2000;
	else if (cur < SC2731_CURRENT_PRECHG)
	cur = SC2731_CURRENT_PRECHG;

	/* Calculate the step value, each step is 50 mA */
	val = (cur - SC2731_CURRENT_PRECHG) / SC2731_CURRENT_STEP;

	/* Set pre-charge current as 450 mA */
	ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
	SC2731_PRECHG_RNG_MASK,
	0x3 << SC2731_PRECHG_RNG_SHIFT);
	if (ret)
	return ret;

	return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG1,
	SC2731_CUR_MASK, val);
	}

	static int sc2731_charger_get_status(struct sc2731_charger_info *info)
	{
	u32 val;
	int ret;

	ret = regmap_read(info->regmap, SC2731_CHARGE_STATUS, &val);
	if (ret)
	return ret;

	if (val & SC2731_CHARGE_FULL)
	return POWER_SUPPLY_STATUS_FULL;

	return POWER_SUPPLY_STATUS_CHARGING;
	}

	static int sc2731_charger_get_current(struct sc2731_charger_info *info,
	u32 *cur)
	{
	int ret;
	u32 val;

	ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG1, &val);
	if (ret)
	return ret;

	val &= SC2731_CUR_MASK;
	cur = val SC2731_CURRENT_STEP + SC2731_CURRENT_PRECHG;

	return 0;
	}

	static int sc2731_charger_get_current_limit(struct sc2731_charger_info *info,
	u32 *cur)
	{
	int ret;
	u32 val;

	ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG5, &val);
	if (ret)
	return ret;

	val = (val & SC2731_CUR_LIMIT_MASK) >> SC2731_CUR_LIMIT_SHIFT;

	switch (val) {
	case 0:
	*cur = SC2731_CURRENT_LIMIT_100;
	break;

	case 1:
	*cur = SC2731_CURRENT_LIMIT_2000;
	break;

	case 2:
	*cur = SC2731_CURRENT_LIMIT_900;
	break;

	case 3:
	*cur = SC2731_CURRENT_LIMIT_500;
	break;

	default:
	return -EINVAL;
	}

	return 0;
	}

	static int
	sc2731_charger_usb_set_property(struct power_supply *psy,
	enum power_supply_property psp,
	const union power_supply_propval *val)
	{
	struct sc2731_charger_info *info = power_supply_get_drvdata(psy);
	int ret;

	mutex_lock(&info->lock);

	if (!info->charging) {
	mutex_unlock(&info->lock);
	return -ENODEV;
	}

	switch (psp) {
	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
	ret = sc2731_charger_set_current(info, val->intval / 1000);
	if (ret < 0)
	dev_err(info->dev, "set charge current failed\n");
	break;

	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
	ret = sc2731_charger_set_current_limit(info,
	val->intval / 1000);
	if (ret < 0)
	dev_err(info->dev, "set input current limit failed\n");
	break;

	default:
	ret = -EINVAL;
	}

	mutex_unlock(&info->lock);
	return ret;
	}

	static int sc2731_charger_usb_get_property(struct power_supply *psy,
	enum power_supply_property psp,
	union power_supply_propval *val)
	{
	struct sc2731_charger_info *info = power_supply_get_drvdata(psy);
	int ret = 0;
	u32 cur;

	mutex_lock(&info->lock);

	switch (psp) {
	case POWER_SUPPLY_PROP_STATUS:
	if (info->charging)
	val->intval = sc2731_charger_get_status(info);
	else
	val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
	break;

	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
	if (!info->charging) {
	val->intval = 0;
	} else {
	ret = sc2731_charger_get_current(info, &cur);
	if (ret)
	goto out;

	val->intval = cur * 1000;
	}
	break;

	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
	if (!info->charging) {
	val->intval = 0;
	} else {
	ret = sc2731_charger_get_current_limit(info, &cur);
	if (ret)
	goto out;

	val->intval = cur * 1000;
	}
	break;

	default:
	ret = -EINVAL;
	}

	out:
	mutex_unlock(&info->lock);
	return ret;
	}

	static int sc2731_charger_property_is_writeable(struct power_supply *psy,
	enum power_supply_property psp)
	{
	int ret;

	switch (psp) {
	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
	ret = 1;
	break;

	default:
	ret = 0;
	}

	return ret;
	}

	static enum power_supply_property sc2731_usb_props[] = {
	POWER_SUPPLY_PROP_STATUS,
	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
	};

	static const struct power_supply_desc sc2731_charger_desc = {
	.name = "sc2731_charger",
	.type = POWER_SUPPLY_TYPE_USB,
	.properties = sc2731_usb_props,
	.num_properties = ARRAY_SIZE(sc2731_usb_props),
	.get_property = sc2731_charger_usb_get_property,
	.set_property = sc2731_charger_usb_set_property,
	.property_is_writeable = sc2731_charger_property_is_writeable,
	};

	static void sc2731_charger_work(struct work_struct *data)
	{
	struct sc2731_charger_info *info =
	container_of(data, struct sc2731_charger_info, work);
	int ret;

	mutex_lock(&info->lock);

	if (info->limit > 0 && !info->charging) {
	/* set current limitation and start to charge */
	ret = sc2731_charger_set_current_limit(info, info->limit);
	if (ret)
	goto out;

	ret = sc2731_charger_set_current(info, info->limit);
	if (ret)
	goto out;

	ret = sc2731_charger_start_charge(info);
	if (ret)
	goto out;

	info->charging = true;
	} else if (!info->limit && info->charging) {
	/* Stop charging */
	info->charging = false;
	sc2731_charger_stop_charge(info);
	}

	out:
	mutex_unlock(&info->lock);
	}

	static int sc2731_charger_usb_change(struct notifier_block *nb,
	unsigned long limit, void *data)
	{
	struct sc2731_charger_info *info =
	container_of(nb, struct sc2731_charger_info, usb_notify);

	info->limit = limit;

	schedule_work(&info->work);

	return NOTIFY_OK;
	}

	static int sc2731_charger_hw_init(struct sc2731_charger_info *info)
	{
	struct power_supply_battery_info *bat_info;
	u32 term_currrent, term_voltage, cur_val, vol_val;
	int ret;

	/* Enable charger module */
	ret = regmap_update_bits(info->regmap, SC2731_MODULE_EN1,
	SC2731_CHARGE_EN, SC2731_CHARGE_EN);
	if (ret)
	return ret;

	ret = power_supply_get_battery_info(info->psy_usb, &bat_info);
	if (ret) {
	dev_warn(info->dev, "no battery information is supplied\n");

	/*
	* If no battery information is supplied, we should set
	* default charge termination current to 120 mA, and default
	* charge termination voltage to 4.35V.
	*/
	cur_val = 0x2;
	vol_val = 0x1;
	} else {
	term_currrent = bat_info->charge_term_current_ua / 1000;

	if (term_currrent <= 90)
	cur_val = 0;
	else if (term_currrent >= 265)
	cur_val = 0x7;
	else
	cur_val = ((term_currrent - 90) / 25) + 1;

	term_voltage = bat_info->constant_charge_voltage_max_uv / 1000;

	if (term_voltage > 4500)
	term_voltage = 4500;

	if (term_voltage > 4200)
	vol_val = (term_voltage - 4200) / 100;
	else
	vol_val = 0;

	power_supply_put_battery_info(info->psy_usb, bat_info);
	}

	/* Set charge termination current */
	ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG2,
	SC2731_TERMINATION_CUR_MASK, cur_val);
	if (ret)
	goto error;

	/* Set charge termination voltage */
	ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
	SC2731_TERMINATION_VOL_MASK \|
	SC2731_TERMINATION_VOL_CAL_MASK,
	(vol_val << SC2731_TERMINATION_VOL_SHIFT) \|
	(0x6 << SC2731_TERMINATION_VOL_CAL_SHIFT));
	if (ret)
	goto error;

	return 0;

	error:
	regmap_update_bits(info->regmap, SC2731_MODULE_EN1, SC2731_CHARGE_EN, 0);
	return ret;
	}

	static void sc2731_charger_detect_status(struct sc2731_charger_info *info)
	{
	unsigned int min, max;

	/*
	* If the USB charger status has been USB_CHARGER_PRESENT before
	* registering the notifier, we should start to charge with getting
	* the charge current.
	*/
	if (info->usb_phy->chg_state != USB_CHARGER_PRESENT)
	return;

	usb_phy_get_charger_current(info->usb_phy, &min, &max);
	info->limit = min;

	schedule_work(&info->work);
	}

	static int sc2731_charger_probe(struct platform_device *pdev)
	{
	struct device_node *np = pdev->dev.of_node;
	struct sc2731_charger_info *info;
	struct power_supply_config charger_cfg = { };
	int ret;

	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
	if (!info)
	return -ENOMEM;

	mutex_init(&info->lock);
	info->dev = &pdev->dev;
	INIT_WORK(&info->work, sc2731_charger_work);

	info->regmap = dev_get_regmap(pdev->dev.parent, NULL);
	if (!info->regmap) {
	dev_err(&pdev->dev, "failed to get charger regmap\n");
	return -ENODEV;
	}

	ret = of_property_read_u32(np, "reg", &info->base);
	if (ret) {
	dev_err(&pdev->dev, "failed to get register address\n");
	return -ENODEV;
	}

	charger_cfg.drv_data = info;
	charger_cfg.of_node = np;
	info->psy_usb = devm_power_supply_register(&pdev->dev,
	&sc2731_charger_desc,
	&charger_cfg);
	if (IS_ERR(info->psy_usb)) {
	dev_err(&pdev->dev, "failed to register power supply\n");
	return PTR_ERR(info->psy_usb);
	}

	ret = sc2731_charger_hw_init(info);
	if (ret)
	return ret;

	info->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "phys", 0);
	if (IS_ERR(info->usb_phy)) {
	dev_err(&pdev->dev, "failed to find USB phy\n");
	return PTR_ERR(info->usb_phy);
	}

	info->usb_notify.notifier_call = sc2731_charger_usb_change;
	ret = usb_register_notifier(info->usb_phy, &info->usb_notify);
	if (ret) {
	dev_err(&pdev->dev, "failed to register notifier: %d\n", ret);
	return ret;
	}

	sc2731_charger_detect_status(info);

	return 0;
	}

	static int sc2731_charger_remove(struct platform_device *pdev)
	{
	struct sc2731_charger_info *info = platform_get_drvdata(pdev);

	usb_unregister_notifier(info->usb_phy, &info->usb_notify);

	return 0;
	}

	static const struct of_device_id sc2731_charger_of_match[] = {
	{ .compatible = "sprd,sc2731-charger", },
	{ }
	};
	MODULE_DEVICE_TABLE(of, sc2731_charger_of_match);

	static struct platform_driver sc2731_charger_driver = {
	.driver = {
	.name = "sc2731-charger",
	.of_match_table = sc2731_charger_of_match,
	},
	.probe = sc2731_charger_probe,
	.remove = sc2731_charger_remove,
	};

	module_platform_driver(sc2731_charger_driver);

	MODULE_DESCRIPTION("Spreadtrum SC2731 Charger Driver");
	MODULE_LICENSE("GPL v2");