| /* |
| * Copyright 2015-2017 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /* To compile this assembly code: |
| * PROJECT=vi ./sp3 cwsr_trap_handler_gfx8.asm -hex tmp.hex |
| */ |
| |
| /**************************************************************************/ |
| /* variables */ |
| /**************************************************************************/ |
| var SQ_WAVE_STATUS_INST_ATC_SHIFT = 23 |
| var SQ_WAVE_STATUS_INST_ATC_MASK = 0x00800000 |
| var SQ_WAVE_STATUS_SPI_PRIO_SHIFT = 1 |
| var SQ_WAVE_STATUS_SPI_PRIO_MASK = 0x00000006 |
| var SQ_WAVE_STATUS_PRE_SPI_PRIO_SHIFT = 0 |
| var SQ_WAVE_STATUS_PRE_SPI_PRIO_SIZE = 1 |
| var SQ_WAVE_STATUS_POST_SPI_PRIO_SHIFT = 3 |
| var SQ_WAVE_STATUS_POST_SPI_PRIO_SIZE = 29 |
| |
| var SQ_WAVE_LDS_ALLOC_LDS_SIZE_SHIFT = 12 |
| var SQ_WAVE_LDS_ALLOC_LDS_SIZE_SIZE = 9 |
| var SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SHIFT = 8 |
| var SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SIZE = 6 |
| var SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SHIFT = 24 |
| var SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SIZE = 3 //FIXME sq.blk still has 4 bits at this time while SQ programming guide has 3 bits |
| |
| var SQ_WAVE_TRAPSTS_SAVECTX_MASK = 0x400 |
| var SQ_WAVE_TRAPSTS_EXCE_MASK = 0x1FF // Exception mask |
| var SQ_WAVE_TRAPSTS_SAVECTX_SHIFT = 10 |
| var SQ_WAVE_TRAPSTS_MEM_VIOL_MASK = 0x100 |
| var SQ_WAVE_TRAPSTS_MEM_VIOL_SHIFT = 8 |
| var SQ_WAVE_TRAPSTS_PRE_SAVECTX_MASK = 0x3FF |
| var SQ_WAVE_TRAPSTS_PRE_SAVECTX_SHIFT = 0x0 |
| var SQ_WAVE_TRAPSTS_PRE_SAVECTX_SIZE = 10 |
| var SQ_WAVE_TRAPSTS_POST_SAVECTX_MASK = 0xFFFFF800 |
| var SQ_WAVE_TRAPSTS_POST_SAVECTX_SHIFT = 11 |
| var SQ_WAVE_TRAPSTS_POST_SAVECTX_SIZE = 21 |
| |
| var SQ_WAVE_IB_STS_RCNT_SHIFT = 16 //FIXME |
| var SQ_WAVE_IB_STS_RCNT_SIZE = 4 //FIXME |
| var SQ_WAVE_IB_STS_FIRST_REPLAY_SHIFT = 15 //FIXME |
| var SQ_WAVE_IB_STS_FIRST_REPLAY_SIZE = 1 //FIXME |
| var SQ_WAVE_IB_STS_RCNT_FIRST_REPLAY_MASK_NEG = 0x00007FFF //FIXME |
| |
| var SQ_BUF_RSRC_WORD1_ATC_SHIFT = 24 |
| var SQ_BUF_RSRC_WORD3_MTYPE_SHIFT = 27 |
| |
| |
| /* Save */ |
| var S_SAVE_BUF_RSRC_WORD1_STRIDE = 0x00040000 //stride is 4 bytes |
| var S_SAVE_BUF_RSRC_WORD3_MISC = 0x00807FAC //SQ_SEL_X/Y/Z/W, BUF_NUM_FORMAT_FLOAT, (0 for MUBUF stride[17:14] when ADD_TID_ENABLE and BUF_DATA_FORMAT_32 for MTBUF), ADD_TID_ENABLE |
| |
| var S_SAVE_SPI_INIT_ATC_MASK = 0x08000000 //bit[27]: ATC bit |
| var S_SAVE_SPI_INIT_ATC_SHIFT = 27 |
| var S_SAVE_SPI_INIT_MTYPE_MASK = 0x70000000 //bit[30:28]: Mtype |
| var S_SAVE_SPI_INIT_MTYPE_SHIFT = 28 |
| var S_SAVE_SPI_INIT_FIRST_WAVE_MASK = 0x04000000 //bit[26]: FirstWaveInTG |
| var S_SAVE_SPI_INIT_FIRST_WAVE_SHIFT = 26 |
| |
| var S_SAVE_PC_HI_RCNT_SHIFT = 28 //FIXME check with Brian to ensure all fields other than PC[47:0] can be used |
| var S_SAVE_PC_HI_RCNT_MASK = 0xF0000000 //FIXME |
| var S_SAVE_PC_HI_FIRST_REPLAY_SHIFT = 27 //FIXME |
| var S_SAVE_PC_HI_FIRST_REPLAY_MASK = 0x08000000 //FIXME |
| |
| var s_save_spi_init_lo = exec_lo |
| var s_save_spi_init_hi = exec_hi |
| |
| //tba_lo and tba_hi need to be saved/restored |
| var s_save_pc_lo = ttmp0 //{TTMP1, TTMP0} = {3'h0,pc_rewind[3:0], HT[0],trapID[7:0], PC[47:0]} |
| var s_save_pc_hi = ttmp1 |
| var s_save_exec_lo = ttmp2 |
| var s_save_exec_hi = ttmp3 |
| var s_save_status = ttmp4 |
| var s_save_trapsts = ttmp5 //not really used until the end of the SAVE routine |
| var s_save_xnack_mask_lo = ttmp6 |
| var s_save_xnack_mask_hi = ttmp7 |
| var s_save_buf_rsrc0 = ttmp8 |
| var s_save_buf_rsrc1 = ttmp9 |
| var s_save_buf_rsrc2 = ttmp10 |
| var s_save_buf_rsrc3 = ttmp11 |
| |
| var s_save_mem_offset = tma_lo |
| var s_save_alloc_size = s_save_trapsts //conflict |
| var s_save_tmp = s_save_buf_rsrc2 //shared with s_save_buf_rsrc2 (conflict: should not use mem access with s_save_tmp at the same time) |
| var s_save_m0 = tma_hi |
| |
| /* Restore */ |
| var S_RESTORE_BUF_RSRC_WORD1_STRIDE = S_SAVE_BUF_RSRC_WORD1_STRIDE |
| var S_RESTORE_BUF_RSRC_WORD3_MISC = S_SAVE_BUF_RSRC_WORD3_MISC |
| |
| var S_RESTORE_SPI_INIT_ATC_MASK = 0x08000000 //bit[27]: ATC bit |
| var S_RESTORE_SPI_INIT_ATC_SHIFT = 27 |
| var S_RESTORE_SPI_INIT_MTYPE_MASK = 0x70000000 //bit[30:28]: Mtype |
| var S_RESTORE_SPI_INIT_MTYPE_SHIFT = 28 |
| var S_RESTORE_SPI_INIT_FIRST_WAVE_MASK = 0x04000000 //bit[26]: FirstWaveInTG |
| var S_RESTORE_SPI_INIT_FIRST_WAVE_SHIFT = 26 |
| |
| var S_RESTORE_PC_HI_RCNT_SHIFT = S_SAVE_PC_HI_RCNT_SHIFT |
| var S_RESTORE_PC_HI_RCNT_MASK = S_SAVE_PC_HI_RCNT_MASK |
| var S_RESTORE_PC_HI_FIRST_REPLAY_SHIFT = S_SAVE_PC_HI_FIRST_REPLAY_SHIFT |
| var S_RESTORE_PC_HI_FIRST_REPLAY_MASK = S_SAVE_PC_HI_FIRST_REPLAY_MASK |
| |
| var s_restore_spi_init_lo = exec_lo |
| var s_restore_spi_init_hi = exec_hi |
| |
| var s_restore_mem_offset = ttmp2 |
| var s_restore_alloc_size = ttmp3 |
| var s_restore_tmp = ttmp6 //tba_lo/hi need to be restored |
| var s_restore_mem_offset_save = s_restore_tmp //no conflict |
| |
| var s_restore_m0 = s_restore_alloc_size //no conflict |
| |
| var s_restore_mode = ttmp7 |
| |
| var s_restore_pc_lo = ttmp0 |
| var s_restore_pc_hi = ttmp1 |
| var s_restore_exec_lo = tma_lo //no conflict |
| var s_restore_exec_hi = tma_hi //no conflict |
| var s_restore_status = ttmp4 |
| var s_restore_trapsts = ttmp5 |
| var s_restore_xnack_mask_lo = xnack_mask_lo |
| var s_restore_xnack_mask_hi = xnack_mask_hi |
| var s_restore_buf_rsrc0 = ttmp8 |
| var s_restore_buf_rsrc1 = ttmp9 |
| var s_restore_buf_rsrc2 = ttmp10 |
| var s_restore_buf_rsrc3 = ttmp11 |
| |
| /**************************************************************************/ |
| /* trap handler entry points */ |
| /**************************************************************************/ |
| /* Shader Main*/ |
| |
| shader main |
| asic(VI) |
| type(CS) |
| |
| |
| s_branch L_SKIP_RESTORE //NOT restore. might be a regular trap or save |
| |
| L_JUMP_TO_RESTORE: |
| s_branch L_RESTORE //restore |
| |
| L_SKIP_RESTORE: |
| |
| s_getreg_b32 s_save_status, hwreg(HW_REG_STATUS) //save STATUS since we will change SCC |
| s_andn2_b32 s_save_status, s_save_status, SQ_WAVE_STATUS_SPI_PRIO_MASK //check whether this is for save |
| s_getreg_b32 s_save_trapsts, hwreg(HW_REG_TRAPSTS) |
| s_and_b32 s_save_trapsts, s_save_trapsts, SQ_WAVE_TRAPSTS_SAVECTX_MASK //check whether this is for save |
| s_cbranch_scc1 L_SAVE //this is the operation for save |
| |
| // ********* Handle non-CWSR traps ******************* |
| |
| /* read tba and tma for next level trap handler, ttmp4 is used as s_save_status */ |
| s_load_dwordx4 [ttmp8,ttmp9,ttmp10, ttmp11], [tma_lo,tma_hi], 0 |
| s_waitcnt lgkmcnt(0) |
| s_or_b32 ttmp7, ttmp8, ttmp9 |
| s_cbranch_scc0 L_NO_NEXT_TRAP //next level trap handler not been set |
| set_status_without_spi_prio(s_save_status, ttmp2) //restore HW status(SCC) |
| s_setpc_b64 [ttmp8,ttmp9] //jump to next level trap handler |
| |
| L_NO_NEXT_TRAP: |
| s_getreg_b32 s_save_trapsts, hwreg(HW_REG_TRAPSTS) |
| s_and_b32 s_save_trapsts, s_save_trapsts, SQ_WAVE_TRAPSTS_EXCE_MASK // Check whether it is an exception |
| s_cbranch_scc1 L_EXCP_CASE // Exception, jump back to the shader program directly. |
| s_add_u32 ttmp0, ttmp0, 4 // S_TRAP case, add 4 to ttmp0 |
| s_addc_u32 ttmp1, ttmp1, 0 |
| L_EXCP_CASE: |
| s_and_b32 ttmp1, ttmp1, 0xFFFF |
| set_status_without_spi_prio(s_save_status, ttmp2) //restore HW status(SCC) |
| s_rfe_b64 [ttmp0, ttmp1] |
| |
| // ********* End handling of non-CWSR traps ******************* |
| |
| /**************************************************************************/ |
| /* save routine */ |
| /**************************************************************************/ |
| |
| L_SAVE: |
| s_mov_b32 s_save_tmp, 0 //clear saveCtx bit |
| s_setreg_b32 hwreg(HW_REG_TRAPSTS, SQ_WAVE_TRAPSTS_SAVECTX_SHIFT, 1), s_save_tmp //clear saveCtx bit |
| |
| s_mov_b32 s_save_xnack_mask_lo, xnack_mask_lo //save XNACK_MASK |
| s_mov_b32 s_save_xnack_mask_hi, xnack_mask_hi //save XNACK must before any memory operation |
| s_getreg_b32 s_save_tmp, hwreg(HW_REG_IB_STS, SQ_WAVE_IB_STS_RCNT_SHIFT, SQ_WAVE_IB_STS_RCNT_SIZE) //save RCNT |
| s_lshl_b32 s_save_tmp, s_save_tmp, S_SAVE_PC_HI_RCNT_SHIFT |
| s_or_b32 s_save_pc_hi, s_save_pc_hi, s_save_tmp |
| s_getreg_b32 s_save_tmp, hwreg(HW_REG_IB_STS, SQ_WAVE_IB_STS_FIRST_REPLAY_SHIFT, SQ_WAVE_IB_STS_FIRST_REPLAY_SIZE) //save FIRST_REPLAY |
| s_lshl_b32 s_save_tmp, s_save_tmp, S_SAVE_PC_HI_FIRST_REPLAY_SHIFT |
| s_or_b32 s_save_pc_hi, s_save_pc_hi, s_save_tmp |
| s_getreg_b32 s_save_tmp, hwreg(HW_REG_IB_STS) //clear RCNT and FIRST_REPLAY in IB_STS |
| s_and_b32 s_save_tmp, s_save_tmp, SQ_WAVE_IB_STS_RCNT_FIRST_REPLAY_MASK_NEG |
| |
| s_setreg_b32 hwreg(HW_REG_IB_STS), s_save_tmp |
| |
| /* inform SPI the readiness and wait for SPI's go signal */ |
| s_mov_b32 s_save_exec_lo, exec_lo //save EXEC and use EXEC for the go signal from SPI |
| s_mov_b32 s_save_exec_hi, exec_hi |
| s_mov_b64 exec, 0x0 //clear EXEC to get ready to receive |
| |
| s_sendmsg sendmsg(MSG_SAVEWAVE) //send SPI a message and wait for SPI's write to EXEC |
| |
| // Set SPI_PRIO=2 to avoid starving instruction fetch in the waves we're waiting for. |
| s_or_b32 s_save_tmp, s_save_status, (2 << SQ_WAVE_STATUS_SPI_PRIO_SHIFT) |
| s_setreg_b32 hwreg(HW_REG_STATUS), s_save_tmp |
| |
| L_SLEEP: |
| s_sleep 0x2 // sleep 1 (64clk) is not enough for 8 waves per SIMD, which will cause SQ hang, since the 7,8th wave could not get arbit to exec inst, while other waves are stuck into the sleep-loop and waiting for wrexec!=0 |
| |
| s_cbranch_execz L_SLEEP |
| |
| /* setup Resource Contants */ |
| s_mov_b32 s_save_buf_rsrc0, s_save_spi_init_lo //base_addr_lo |
| s_and_b32 s_save_buf_rsrc1, s_save_spi_init_hi, 0x0000FFFF //base_addr_hi |
| s_or_b32 s_save_buf_rsrc1, s_save_buf_rsrc1, S_SAVE_BUF_RSRC_WORD1_STRIDE |
| s_mov_b32 s_save_buf_rsrc2, 0 //NUM_RECORDS initial value = 0 (in bytes) although not neccessarily inited |
| s_mov_b32 s_save_buf_rsrc3, S_SAVE_BUF_RSRC_WORD3_MISC |
| s_and_b32 s_save_tmp, s_save_spi_init_hi, S_SAVE_SPI_INIT_ATC_MASK |
| s_lshr_b32 s_save_tmp, s_save_tmp, (S_SAVE_SPI_INIT_ATC_SHIFT-SQ_BUF_RSRC_WORD1_ATC_SHIFT) //get ATC bit into position |
| s_or_b32 s_save_buf_rsrc3, s_save_buf_rsrc3, s_save_tmp //or ATC |
| s_and_b32 s_save_tmp, s_save_spi_init_hi, S_SAVE_SPI_INIT_MTYPE_MASK |
| s_lshr_b32 s_save_tmp, s_save_tmp, (S_SAVE_SPI_INIT_MTYPE_SHIFT-SQ_BUF_RSRC_WORD3_MTYPE_SHIFT) //get MTYPE bits into position |
| s_or_b32 s_save_buf_rsrc3, s_save_buf_rsrc3, s_save_tmp //or MTYPE |
| |
| //FIXME right now s_save_m0/s_save_mem_offset use tma_lo/tma_hi (might need to save them before using them?) |
| s_mov_b32 s_save_m0, m0 //save M0 |
| |
| /* global mem offset */ |
| s_mov_b32 s_save_mem_offset, 0x0 //mem offset initial value = 0 |
| |
| |
| |
| |
| /* save HW registers */ |
| ////////////////////////////// |
| |
| L_SAVE_HWREG: |
| // HWREG SR memory offset : size(VGPR)+size(SGPR) |
| get_vgpr_size_bytes(s_save_mem_offset) |
| get_sgpr_size_bytes(s_save_tmp) |
| s_add_u32 s_save_mem_offset, s_save_mem_offset, s_save_tmp |
| |
| |
| s_mov_b32 s_save_buf_rsrc2, 0x4 //NUM_RECORDS in bytes |
| s_mov_b32 s_save_buf_rsrc2, 0x1000000 //NUM_RECORDS in bytes |
| |
| |
| write_hwreg_to_mem(s_save_m0, s_save_buf_rsrc0, s_save_mem_offset) //M0 |
| write_hwreg_to_mem(s_save_pc_lo, s_save_buf_rsrc0, s_save_mem_offset) //PC |
| write_hwreg_to_mem(s_save_pc_hi, s_save_buf_rsrc0, s_save_mem_offset) |
| write_hwreg_to_mem(s_save_exec_lo, s_save_buf_rsrc0, s_save_mem_offset) //EXEC |
| write_hwreg_to_mem(s_save_exec_hi, s_save_buf_rsrc0, s_save_mem_offset) |
| write_hwreg_to_mem(s_save_status, s_save_buf_rsrc0, s_save_mem_offset) //STATUS |
| |
| //s_save_trapsts conflicts with s_save_alloc_size |
| s_getreg_b32 s_save_trapsts, hwreg(HW_REG_TRAPSTS) |
| write_hwreg_to_mem(s_save_trapsts, s_save_buf_rsrc0, s_save_mem_offset) //TRAPSTS |
| |
| write_hwreg_to_mem(s_save_xnack_mask_lo, s_save_buf_rsrc0, s_save_mem_offset) //XNACK_MASK_LO |
| write_hwreg_to_mem(s_save_xnack_mask_hi, s_save_buf_rsrc0, s_save_mem_offset) //XNACK_MASK_HI |
| |
| //use s_save_tmp would introduce conflict here between s_save_tmp and s_save_buf_rsrc2 |
| s_getreg_b32 s_save_m0, hwreg(HW_REG_MODE) //MODE |
| write_hwreg_to_mem(s_save_m0, s_save_buf_rsrc0, s_save_mem_offset) |
| write_hwreg_to_mem(tba_lo, s_save_buf_rsrc0, s_save_mem_offset) //TBA_LO |
| write_hwreg_to_mem(tba_hi, s_save_buf_rsrc0, s_save_mem_offset) //TBA_HI |
| |
| |
| |
| /* the first wave in the threadgroup */ |
| // save fist_wave bits in tba_hi unused bit.26 |
| s_and_b32 s_save_tmp, s_save_spi_init_hi, S_SAVE_SPI_INIT_FIRST_WAVE_MASK // extract fisrt wave bit |
| //s_or_b32 tba_hi, s_save_tmp, tba_hi // save first wave bit to tba_hi.bits[26] |
| s_mov_b32 s_save_exec_hi, 0x0 |
| s_or_b32 s_save_exec_hi, s_save_tmp, s_save_exec_hi // save first wave bit to s_save_exec_hi.bits[26] |
| |
| |
| /* save SGPRs */ |
| // Save SGPR before LDS save, then the s0 to s4 can be used during LDS save... |
| ////////////////////////////// |
| |
| // SGPR SR memory offset : size(VGPR) |
| get_vgpr_size_bytes(s_save_mem_offset) |
| // TODO, change RSRC word to rearrange memory layout for SGPRS |
| |
| s_getreg_b32 s_save_alloc_size, hwreg(HW_REG_GPR_ALLOC,SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SHIFT,SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SIZE) //spgr_size |
| s_add_u32 s_save_alloc_size, s_save_alloc_size, 1 |
| s_lshl_b32 s_save_alloc_size, s_save_alloc_size, 4 //Number of SGPRs = (sgpr_size + 1) * 16 (non-zero value) |
| |
| s_lshl_b32 s_save_buf_rsrc2, s_save_alloc_size, 2 //NUM_RECORDS in bytes |
| s_mov_b32 s_save_buf_rsrc2, 0x1000000 //NUM_RECORDS in bytes |
| |
| // backup s_save_buf_rsrc0,1 to s_save_pc_lo/hi, since write_16sgpr_to_mem function will change the rsrc0 |
| //s_mov_b64 s_save_pc_lo, s_save_buf_rsrc0 |
| s_mov_b64 s_save_xnack_mask_lo, s_save_buf_rsrc0 |
| s_add_u32 s_save_buf_rsrc0, s_save_buf_rsrc0, s_save_mem_offset |
| s_addc_u32 s_save_buf_rsrc1, s_save_buf_rsrc1, 0 |
| |
| s_mov_b32 m0, 0x0 //SGPR initial index value =0 |
| L_SAVE_SGPR_LOOP: |
| // SGPR is allocated in 16 SGPR granularity |
| s_movrels_b64 s0, s0 //s0 = s[0+m0], s1 = s[1+m0] |
| s_movrels_b64 s2, s2 //s2 = s[2+m0], s3 = s[3+m0] |
| s_movrels_b64 s4, s4 //s4 = s[4+m0], s5 = s[5+m0] |
| s_movrels_b64 s6, s6 //s6 = s[6+m0], s7 = s[7+m0] |
| s_movrels_b64 s8, s8 //s8 = s[8+m0], s9 = s[9+m0] |
| s_movrels_b64 s10, s10 //s10 = s[10+m0], s11 = s[11+m0] |
| s_movrels_b64 s12, s12 //s12 = s[12+m0], s13 = s[13+m0] |
| s_movrels_b64 s14, s14 //s14 = s[14+m0], s15 = s[15+m0] |
| |
| write_16sgpr_to_mem(s0, s_save_buf_rsrc0, s_save_mem_offset) //PV: the best performance should be using s_buffer_store_dwordx4 |
| s_add_u32 m0, m0, 16 //next sgpr index |
| s_cmp_lt_u32 m0, s_save_alloc_size //scc = (m0 < s_save_alloc_size) ? 1 : 0 |
| s_cbranch_scc1 L_SAVE_SGPR_LOOP //SGPR save is complete? |
| // restore s_save_buf_rsrc0,1 |
| //s_mov_b64 s_save_buf_rsrc0, s_save_pc_lo |
| s_mov_b64 s_save_buf_rsrc0, s_save_xnack_mask_lo |
| |
| |
| |
| |
| /* save first 4 VGPR, then LDS save could use */ |
| // each wave will alloc 4 vgprs at least... |
| ///////////////////////////////////////////////////////////////////////////////////// |
| |
| s_mov_b32 s_save_mem_offset, 0 |
| s_mov_b32 exec_lo, 0xFFFFFFFF //need every thread from now on |
| s_mov_b32 exec_hi, 0xFFFFFFFF |
| |
| s_mov_b32 s_save_buf_rsrc2, 0x1000000 //NUM_RECORDS in bytes |
| |
| // VGPR Allocated in 4-GPR granularity |
| |
| buffer_store_dword v0, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1 |
| buffer_store_dword v1, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1 offset:256 |
| buffer_store_dword v2, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1 offset:256*2 |
| buffer_store_dword v3, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1 offset:256*3 |
| |
| |
| |
| /* save LDS */ |
| ////////////////////////////// |
| |
| L_SAVE_LDS: |
| |
| // Change EXEC to all threads... |
| s_mov_b32 exec_lo, 0xFFFFFFFF //need every thread from now on |
| s_mov_b32 exec_hi, 0xFFFFFFFF |
| |
| s_getreg_b32 s_save_alloc_size, hwreg(HW_REG_LDS_ALLOC,SQ_WAVE_LDS_ALLOC_LDS_SIZE_SHIFT,SQ_WAVE_LDS_ALLOC_LDS_SIZE_SIZE) //lds_size |
| s_and_b32 s_save_alloc_size, s_save_alloc_size, 0xFFFFFFFF //lds_size is zero? |
| s_cbranch_scc0 L_SAVE_LDS_DONE //no lds used? jump to L_SAVE_DONE |
| |
| s_barrier //LDS is used? wait for other waves in the same TG |
| //s_and_b32 s_save_tmp, tba_hi, S_SAVE_SPI_INIT_FIRST_WAVE_MASK //exec is still used here |
| s_and_b32 s_save_tmp, s_save_exec_hi, S_SAVE_SPI_INIT_FIRST_WAVE_MASK //exec is still used here |
| s_cbranch_scc0 L_SAVE_LDS_DONE |
| |
| // first wave do LDS save; |
| |
| s_lshl_b32 s_save_alloc_size, s_save_alloc_size, 6 //LDS size in dwords = lds_size * 64dw |
| s_lshl_b32 s_save_alloc_size, s_save_alloc_size, 2 //LDS size in bytes |
| s_mov_b32 s_save_buf_rsrc2, s_save_alloc_size //NUM_RECORDS in bytes |
| |
| // LDS at offset: size(VGPR)+SIZE(SGPR)+SIZE(HWREG) |
| // |
| get_vgpr_size_bytes(s_save_mem_offset) |
| get_sgpr_size_bytes(s_save_tmp) |
| s_add_u32 s_save_mem_offset, s_save_mem_offset, s_save_tmp |
| s_add_u32 s_save_mem_offset, s_save_mem_offset, get_hwreg_size_bytes() |
| |
| |
| s_mov_b32 s_save_buf_rsrc2, 0x1000000 //NUM_RECORDS in bytes |
| s_mov_b32 m0, 0x0 //lds_offset initial value = 0 |
| |
| |
| v_mbcnt_lo_u32_b32 v2, 0xffffffff, 0x0 |
| v_mbcnt_hi_u32_b32 v3, 0xffffffff, v2 // tid |
| v_mul_i32_i24 v2, v3, 8 // tid*8 |
| v_mov_b32 v3, 256*2 |
| s_mov_b32 m0, 0x10000 |
| s_mov_b32 s0, s_save_buf_rsrc3 |
| s_and_b32 s_save_buf_rsrc3, s_save_buf_rsrc3, 0xFF7FFFFF // disable add_tid |
| s_or_b32 s_save_buf_rsrc3, s_save_buf_rsrc3, 0x58000 //DFMT |
| |
| L_SAVE_LDS_LOOP_VECTOR: |
| ds_read_b64 v[0:1], v2 //x =LDS[a], byte address |
| s_waitcnt lgkmcnt(0) |
| buffer_store_dwordx2 v[0:1], v2, s_save_buf_rsrc0, s_save_mem_offset offen:1 glc:1 slc:1 |
| // s_waitcnt vmcnt(0) |
| v_add_u32 v2, vcc[0:1], v2, v3 |
| v_cmp_lt_u32 vcc[0:1], v2, s_save_alloc_size |
| s_cbranch_vccnz L_SAVE_LDS_LOOP_VECTOR |
| |
| // restore rsrc3 |
| s_mov_b32 s_save_buf_rsrc3, s0 |
| |
| L_SAVE_LDS_DONE: |
| |
| |
| /* save VGPRs - set the Rest VGPRs */ |
| ////////////////////////////////////////////////////////////////////////////////////// |
| L_SAVE_VGPR: |
| // VGPR SR memory offset: 0 |
| // TODO rearrange the RSRC words to use swizzle for VGPR save... |
| |
| s_mov_b32 s_save_mem_offset, (0+256*4) // for the rest VGPRs |
| s_mov_b32 exec_lo, 0xFFFFFFFF //need every thread from now on |
| s_mov_b32 exec_hi, 0xFFFFFFFF |
| |
| s_getreg_b32 s_save_alloc_size, hwreg(HW_REG_GPR_ALLOC,SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SHIFT,SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SIZE) //vpgr_size |
| s_add_u32 s_save_alloc_size, s_save_alloc_size, 1 |
| s_lshl_b32 s_save_alloc_size, s_save_alloc_size, 2 //Number of VGPRs = (vgpr_size + 1) * 4 (non-zero value) //FIXME for GFX, zero is possible |
| s_lshl_b32 s_save_buf_rsrc2, s_save_alloc_size, 8 //NUM_RECORDS in bytes (64 threads*4) |
| s_mov_b32 s_save_buf_rsrc2, 0x1000000 //NUM_RECORDS in bytes |
| |
| // VGPR store using dw burst |
| s_mov_b32 m0, 0x4 //VGPR initial index value =0 |
| s_cmp_lt_u32 m0, s_save_alloc_size |
| s_cbranch_scc0 L_SAVE_VGPR_END |
| |
| |
| s_set_gpr_idx_on m0, 0x1 //M0[7:0] = M0[7:0] and M0[15:12] = 0x1 |
| s_add_u32 s_save_alloc_size, s_save_alloc_size, 0x1000 //add 0x1000 since we compare m0 against it later |
| |
| L_SAVE_VGPR_LOOP: |
| v_mov_b32 v0, v0 //v0 = v[0+m0] |
| v_mov_b32 v1, v1 //v0 = v[0+m0] |
| v_mov_b32 v2, v2 //v0 = v[0+m0] |
| v_mov_b32 v3, v3 //v0 = v[0+m0] |
| |
| buffer_store_dword v0, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1 |
| buffer_store_dword v1, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1 offset:256 |
| buffer_store_dword v2, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1 offset:256*2 |
| buffer_store_dword v3, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1 offset:256*3 |
| |
| s_add_u32 m0, m0, 4 //next vgpr index |
| s_add_u32 s_save_mem_offset, s_save_mem_offset, 256*4 //every buffer_store_dword does 256 bytes |
| s_cmp_lt_u32 m0, s_save_alloc_size //scc = (m0 < s_save_alloc_size) ? 1 : 0 |
| s_cbranch_scc1 L_SAVE_VGPR_LOOP //VGPR save is complete? |
| s_set_gpr_idx_off |
| |
| L_SAVE_VGPR_END: |
| s_branch L_END_PGM |
| |
| |
| |
| /**************************************************************************/ |
| /* restore routine */ |
| /**************************************************************************/ |
| |
| L_RESTORE: |
| /* Setup Resource Contants */ |
| s_mov_b32 s_restore_buf_rsrc0, s_restore_spi_init_lo //base_addr_lo |
| s_and_b32 s_restore_buf_rsrc1, s_restore_spi_init_hi, 0x0000FFFF //base_addr_hi |
| s_or_b32 s_restore_buf_rsrc1, s_restore_buf_rsrc1, S_RESTORE_BUF_RSRC_WORD1_STRIDE |
| s_mov_b32 s_restore_buf_rsrc2, 0 //NUM_RECORDS initial value = 0 (in bytes) |
| s_mov_b32 s_restore_buf_rsrc3, S_RESTORE_BUF_RSRC_WORD3_MISC |
| s_and_b32 s_restore_tmp, s_restore_spi_init_hi, S_RESTORE_SPI_INIT_ATC_MASK |
| s_lshr_b32 s_restore_tmp, s_restore_tmp, (S_RESTORE_SPI_INIT_ATC_SHIFT-SQ_BUF_RSRC_WORD1_ATC_SHIFT) //get ATC bit into position |
| s_or_b32 s_restore_buf_rsrc3, s_restore_buf_rsrc3, s_restore_tmp //or ATC |
| s_and_b32 s_restore_tmp, s_restore_spi_init_hi, S_RESTORE_SPI_INIT_MTYPE_MASK |
| s_lshr_b32 s_restore_tmp, s_restore_tmp, (S_RESTORE_SPI_INIT_MTYPE_SHIFT-SQ_BUF_RSRC_WORD3_MTYPE_SHIFT) //get MTYPE bits into position |
| s_or_b32 s_restore_buf_rsrc3, s_restore_buf_rsrc3, s_restore_tmp //or MTYPE |
| |
| /* global mem offset */ |
| // s_mov_b32 s_restore_mem_offset, 0x0 //mem offset initial value = 0 |
| |
| /* the first wave in the threadgroup */ |
| s_and_b32 s_restore_tmp, s_restore_spi_init_hi, S_RESTORE_SPI_INIT_FIRST_WAVE_MASK |
| s_cbranch_scc0 L_RESTORE_VGPR |
| |
| /* restore LDS */ |
| ////////////////////////////// |
| L_RESTORE_LDS: |
| |
| s_mov_b32 exec_lo, 0xFFFFFFFF //need every thread from now on //be consistent with SAVE although can be moved ahead |
| s_mov_b32 exec_hi, 0xFFFFFFFF |
| |
| s_getreg_b32 s_restore_alloc_size, hwreg(HW_REG_LDS_ALLOC,SQ_WAVE_LDS_ALLOC_LDS_SIZE_SHIFT,SQ_WAVE_LDS_ALLOC_LDS_SIZE_SIZE) //lds_size |
| s_and_b32 s_restore_alloc_size, s_restore_alloc_size, 0xFFFFFFFF //lds_size is zero? |
| s_cbranch_scc0 L_RESTORE_VGPR //no lds used? jump to L_RESTORE_VGPR |
| s_lshl_b32 s_restore_alloc_size, s_restore_alloc_size, 6 //LDS size in dwords = lds_size * 64dw |
| s_lshl_b32 s_restore_alloc_size, s_restore_alloc_size, 2 //LDS size in bytes |
| s_mov_b32 s_restore_buf_rsrc2, s_restore_alloc_size //NUM_RECORDS in bytes |
| |
| // LDS at offset: size(VGPR)+SIZE(SGPR)+SIZE(HWREG) |
| // |
| get_vgpr_size_bytes(s_restore_mem_offset) |
| get_sgpr_size_bytes(s_restore_tmp) |
| s_add_u32 s_restore_mem_offset, s_restore_mem_offset, s_restore_tmp |
| s_add_u32 s_restore_mem_offset, s_restore_mem_offset, get_hwreg_size_bytes() //FIXME, Check if offset overflow??? |
| |
| |
| s_mov_b32 s_restore_buf_rsrc2, 0x1000000 //NUM_RECORDS in bytes |
| s_mov_b32 m0, 0x0 //lds_offset initial value = 0 |
| |
| L_RESTORE_LDS_LOOP: |
| buffer_load_dword v0, v0, s_restore_buf_rsrc0, s_restore_mem_offset lds:1 // first 64DW |
| buffer_load_dword v0, v0, s_restore_buf_rsrc0, s_restore_mem_offset lds:1 offset:256 // second 64DW |
| s_add_u32 m0, m0, 256*2 // 128 DW |
| s_add_u32 s_restore_mem_offset, s_restore_mem_offset, 256*2 //mem offset increased by 128DW |
| s_cmp_lt_u32 m0, s_restore_alloc_size //scc=(m0 < s_restore_alloc_size) ? 1 : 0 |
| s_cbranch_scc1 L_RESTORE_LDS_LOOP //LDS restore is complete? |
| |
| |
| /* restore VGPRs */ |
| ////////////////////////////// |
| L_RESTORE_VGPR: |
| // VGPR SR memory offset : 0 |
| s_mov_b32 s_restore_mem_offset, 0x0 |
| s_mov_b32 exec_lo, 0xFFFFFFFF //need every thread from now on //be consistent with SAVE although can be moved ahead |
| s_mov_b32 exec_hi, 0xFFFFFFFF |
| |
| s_getreg_b32 s_restore_alloc_size, hwreg(HW_REG_GPR_ALLOC,SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SHIFT,SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SIZE) //vpgr_size |
| s_add_u32 s_restore_alloc_size, s_restore_alloc_size, 1 |
| s_lshl_b32 s_restore_alloc_size, s_restore_alloc_size, 2 //Number of VGPRs = (vgpr_size + 1) * 4 (non-zero value) |
| s_lshl_b32 s_restore_buf_rsrc2, s_restore_alloc_size, 8 //NUM_RECORDS in bytes (64 threads*4) |
| s_mov_b32 s_restore_buf_rsrc2, 0x1000000 //NUM_RECORDS in bytes |
| |
| // VGPR load using dw burst |
| s_mov_b32 s_restore_mem_offset_save, s_restore_mem_offset // restore start with v1, v0 will be the last |
| s_add_u32 s_restore_mem_offset, s_restore_mem_offset, 256*4 |
| s_mov_b32 m0, 4 //VGPR initial index value = 1 |
| s_set_gpr_idx_on m0, 0x8 //M0[7:0] = M0[7:0] and M0[15:12] = 0x8 |
| s_add_u32 s_restore_alloc_size, s_restore_alloc_size, 0x8000 //add 0x8000 since we compare m0 against it later |
| |
| L_RESTORE_VGPR_LOOP: |
| buffer_load_dword v0, v0, s_restore_buf_rsrc0, s_restore_mem_offset slc:1 glc:1 |
| buffer_load_dword v1, v0, s_restore_buf_rsrc0, s_restore_mem_offset slc:1 glc:1 offset:256 |
| buffer_load_dword v2, v0, s_restore_buf_rsrc0, s_restore_mem_offset slc:1 glc:1 offset:256*2 |
| buffer_load_dword v3, v0, s_restore_buf_rsrc0, s_restore_mem_offset slc:1 glc:1 offset:256*3 |
| s_waitcnt vmcnt(0) //ensure data ready |
| v_mov_b32 v0, v0 //v[0+m0] = v0 |
| v_mov_b32 v1, v1 |
| v_mov_b32 v2, v2 |
| v_mov_b32 v3, v3 |
| s_add_u32 m0, m0, 4 //next vgpr index |
| s_add_u32 s_restore_mem_offset, s_restore_mem_offset, 256*4 //every buffer_load_dword does 256 bytes |
| s_cmp_lt_u32 m0, s_restore_alloc_size //scc = (m0 < s_restore_alloc_size) ? 1 : 0 |
| s_cbranch_scc1 L_RESTORE_VGPR_LOOP //VGPR restore (except v0) is complete? |
| s_set_gpr_idx_off |
| /* VGPR restore on v0 */ |
| buffer_load_dword v0, v0, s_restore_buf_rsrc0, s_restore_mem_offset_save slc:1 glc:1 |
| buffer_load_dword v1, v0, s_restore_buf_rsrc0, s_restore_mem_offset_save slc:1 glc:1 offset:256 |
| buffer_load_dword v2, v0, s_restore_buf_rsrc0, s_restore_mem_offset_save slc:1 glc:1 offset:256*2 |
| buffer_load_dword v3, v0, s_restore_buf_rsrc0, s_restore_mem_offset_save slc:1 glc:1 offset:256*3 |
| |
| /* restore SGPRs */ |
| ////////////////////////////// |
| |
| // SGPR SR memory offset : size(VGPR) |
| get_vgpr_size_bytes(s_restore_mem_offset) |
| get_sgpr_size_bytes(s_restore_tmp) |
| s_add_u32 s_restore_mem_offset, s_restore_mem_offset, s_restore_tmp |
| s_sub_u32 s_restore_mem_offset, s_restore_mem_offset, 16*4 // restore SGPR from S[n] to S[0], by 16 sgprs group |
| // TODO, change RSRC word to rearrange memory layout for SGPRS |
| |
| s_getreg_b32 s_restore_alloc_size, hwreg(HW_REG_GPR_ALLOC,SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SHIFT,SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SIZE) //spgr_size |
| s_add_u32 s_restore_alloc_size, s_restore_alloc_size, 1 |
| s_lshl_b32 s_restore_alloc_size, s_restore_alloc_size, 4 //Number of SGPRs = (sgpr_size + 1) * 16 (non-zero value) |
| |
| s_lshl_b32 s_restore_buf_rsrc2, s_restore_alloc_size, 2 //NUM_RECORDS in bytes |
| s_mov_b32 s_restore_buf_rsrc2, 0x1000000 //NUM_RECORDS in bytes |
| |
| /* If 112 SGPRs ar allocated, 4 sgprs are not used TBA(108,109),TMA(110,111), |
| However, we are safe to restore these 4 SGPRs anyway, since TBA,TMA will later be restored by HWREG |
| */ |
| s_mov_b32 m0, s_restore_alloc_size |
| |
| L_RESTORE_SGPR_LOOP: |
| read_16sgpr_from_mem(s0, s_restore_buf_rsrc0, s_restore_mem_offset) //PV: further performance improvement can be made |
| s_waitcnt lgkmcnt(0) //ensure data ready |
| |
| s_sub_u32 m0, m0, 16 // Restore from S[n] to S[0] |
| |
| s_movreld_b64 s0, s0 //s[0+m0] = s0 |
| s_movreld_b64 s2, s2 |
| s_movreld_b64 s4, s4 |
| s_movreld_b64 s6, s6 |
| s_movreld_b64 s8, s8 |
| s_movreld_b64 s10, s10 |
| s_movreld_b64 s12, s12 |
| s_movreld_b64 s14, s14 |
| |
| s_cmp_eq_u32 m0, 0 //scc = (m0 < s_restore_alloc_size) ? 1 : 0 |
| s_cbranch_scc0 L_RESTORE_SGPR_LOOP //SGPR restore (except s0) is complete? |
| |
| /* restore HW registers */ |
| ////////////////////////////// |
| L_RESTORE_HWREG: |
| |
| // HWREG SR memory offset : size(VGPR)+size(SGPR) |
| get_vgpr_size_bytes(s_restore_mem_offset) |
| get_sgpr_size_bytes(s_restore_tmp) |
| s_add_u32 s_restore_mem_offset, s_restore_mem_offset, s_restore_tmp |
| |
| |
| s_mov_b32 s_restore_buf_rsrc2, 0x4 //NUM_RECORDS in bytes |
| s_mov_b32 s_restore_buf_rsrc2, 0x1000000 //NUM_RECORDS in bytes |
| |
| read_hwreg_from_mem(s_restore_m0, s_restore_buf_rsrc0, s_restore_mem_offset) //M0 |
| read_hwreg_from_mem(s_restore_pc_lo, s_restore_buf_rsrc0, s_restore_mem_offset) //PC |
| read_hwreg_from_mem(s_restore_pc_hi, s_restore_buf_rsrc0, s_restore_mem_offset) |
| read_hwreg_from_mem(s_restore_exec_lo, s_restore_buf_rsrc0, s_restore_mem_offset) //EXEC |
| read_hwreg_from_mem(s_restore_exec_hi, s_restore_buf_rsrc0, s_restore_mem_offset) |
| read_hwreg_from_mem(s_restore_status, s_restore_buf_rsrc0, s_restore_mem_offset) //STATUS |
| read_hwreg_from_mem(s_restore_trapsts, s_restore_buf_rsrc0, s_restore_mem_offset) //TRAPSTS |
| read_hwreg_from_mem(xnack_mask_lo, s_restore_buf_rsrc0, s_restore_mem_offset) //XNACK_MASK_LO |
| read_hwreg_from_mem(xnack_mask_hi, s_restore_buf_rsrc0, s_restore_mem_offset) //XNACK_MASK_HI |
| read_hwreg_from_mem(s_restore_mode, s_restore_buf_rsrc0, s_restore_mem_offset) //MODE |
| read_hwreg_from_mem(tba_lo, s_restore_buf_rsrc0, s_restore_mem_offset) //TBA_LO |
| read_hwreg_from_mem(tba_hi, s_restore_buf_rsrc0, s_restore_mem_offset) //TBA_HI |
| |
| s_waitcnt lgkmcnt(0) //from now on, it is safe to restore STATUS and IB_STS |
| |
| s_mov_b32 m0, s_restore_m0 |
| s_mov_b32 exec_lo, s_restore_exec_lo |
| s_mov_b32 exec_hi, s_restore_exec_hi |
| |
| s_and_b32 s_restore_m0, SQ_WAVE_TRAPSTS_PRE_SAVECTX_MASK, s_restore_trapsts |
| s_setreg_b32 hwreg(HW_REG_TRAPSTS, SQ_WAVE_TRAPSTS_PRE_SAVECTX_SHIFT, SQ_WAVE_TRAPSTS_PRE_SAVECTX_SIZE), s_restore_m0 |
| s_and_b32 s_restore_m0, SQ_WAVE_TRAPSTS_POST_SAVECTX_MASK, s_restore_trapsts |
| s_lshr_b32 s_restore_m0, s_restore_m0, SQ_WAVE_TRAPSTS_POST_SAVECTX_SHIFT |
| s_setreg_b32 hwreg(HW_REG_TRAPSTS, SQ_WAVE_TRAPSTS_POST_SAVECTX_SHIFT, SQ_WAVE_TRAPSTS_POST_SAVECTX_SIZE), s_restore_m0 |
| //s_setreg_b32 hwreg(HW_REG_TRAPSTS), s_restore_trapsts //don't overwrite SAVECTX bit as it may be set through external SAVECTX during restore |
| s_setreg_b32 hwreg(HW_REG_MODE), s_restore_mode |
| //reuse s_restore_m0 as a temp register |
| s_and_b32 s_restore_m0, s_restore_pc_hi, S_SAVE_PC_HI_RCNT_MASK |
| s_lshr_b32 s_restore_m0, s_restore_m0, S_SAVE_PC_HI_RCNT_SHIFT |
| s_lshl_b32 s_restore_m0, s_restore_m0, SQ_WAVE_IB_STS_RCNT_SHIFT |
| s_mov_b32 s_restore_tmp, 0x0 //IB_STS is zero |
| s_or_b32 s_restore_tmp, s_restore_tmp, s_restore_m0 |
| s_and_b32 s_restore_m0, s_restore_pc_hi, S_SAVE_PC_HI_FIRST_REPLAY_MASK |
| s_lshr_b32 s_restore_m0, s_restore_m0, S_SAVE_PC_HI_FIRST_REPLAY_SHIFT |
| s_lshl_b32 s_restore_m0, s_restore_m0, SQ_WAVE_IB_STS_FIRST_REPLAY_SHIFT |
| s_or_b32 s_restore_tmp, s_restore_tmp, s_restore_m0 |
| s_and_b32 s_restore_m0, s_restore_status, SQ_WAVE_STATUS_INST_ATC_MASK |
| s_lshr_b32 s_restore_m0, s_restore_m0, SQ_WAVE_STATUS_INST_ATC_SHIFT |
| s_setreg_b32 hwreg(HW_REG_IB_STS), s_restore_tmp |
| |
| s_and_b32 s_restore_pc_hi, s_restore_pc_hi, 0x0000ffff //pc[47:32] //Do it here in order not to affect STATUS |
| s_and_b64 exec, exec, exec // Restore STATUS.EXECZ, not writable by s_setreg_b32 |
| s_and_b64 vcc, vcc, vcc // Restore STATUS.VCCZ, not writable by s_setreg_b32 |
| set_status_without_spi_prio(s_restore_status, s_restore_tmp) // SCC is included, which is changed by previous salu |
| |
| s_barrier //barrier to ensure the readiness of LDS before access attempts from any other wave in the same TG //FIXME not performance-optimal at this time |
| |
| // s_rfe_b64 s_restore_pc_lo //Return to the main shader program and resume execution |
| s_rfe_restore_b64 s_restore_pc_lo, s_restore_m0 // s_restore_m0[0] is used to set STATUS.inst_atc |
| |
| |
| /**************************************************************************/ |
| /* the END */ |
| /**************************************************************************/ |
| L_END_PGM: |
| s_endpgm |
| |
| end |
| |
| |
| /**************************************************************************/ |
| /* the helper functions */ |
| /**************************************************************************/ |
| |
| //Only for save hwreg to mem |
| function write_hwreg_to_mem(s, s_rsrc, s_mem_offset) |
| s_mov_b32 exec_lo, m0 //assuming exec_lo is not needed anymore from this point on |
| s_mov_b32 m0, s_mem_offset |
| s_buffer_store_dword s, s_rsrc, m0 glc:1 |
| s_add_u32 s_mem_offset, s_mem_offset, 4 |
| s_mov_b32 m0, exec_lo |
| end |
| |
| |
| // HWREG are saved before SGPRs, so all HWREG could be use. |
| function write_16sgpr_to_mem(s, s_rsrc, s_mem_offset) |
| |
| s_buffer_store_dwordx4 s[0], s_rsrc, 0 glc:1 |
| s_buffer_store_dwordx4 s[4], s_rsrc, 16 glc:1 |
| s_buffer_store_dwordx4 s[8], s_rsrc, 32 glc:1 |
| s_buffer_store_dwordx4 s[12], s_rsrc, 48 glc:1 |
| s_add_u32 s_rsrc[0], s_rsrc[0], 4*16 |
| s_addc_u32 s_rsrc[1], s_rsrc[1], 0x0 // +scc |
| end |
| |
| |
| function read_hwreg_from_mem(s, s_rsrc, s_mem_offset) |
| s_buffer_load_dword s, s_rsrc, s_mem_offset glc:1 |
| s_add_u32 s_mem_offset, s_mem_offset, 4 |
| end |
| |
| function read_16sgpr_from_mem(s, s_rsrc, s_mem_offset) |
| s_buffer_load_dwordx16 s, s_rsrc, s_mem_offset glc:1 |
| s_sub_u32 s_mem_offset, s_mem_offset, 4*16 |
| end |
| |
| |
| |
| function get_lds_size_bytes(s_lds_size_byte) |
| // SQ LDS granularity is 64DW, while PGM_RSRC2.lds_size is in granularity 128DW |
| s_getreg_b32 s_lds_size_byte, hwreg(HW_REG_LDS_ALLOC, SQ_WAVE_LDS_ALLOC_LDS_SIZE_SHIFT, SQ_WAVE_LDS_ALLOC_LDS_SIZE_SIZE) // lds_size |
| s_lshl_b32 s_lds_size_byte, s_lds_size_byte, 8 //LDS size in dwords = lds_size * 64 *4Bytes // granularity 64DW |
| end |
| |
| function get_vgpr_size_bytes(s_vgpr_size_byte) |
| s_getreg_b32 s_vgpr_size_byte, hwreg(HW_REG_GPR_ALLOC,SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SHIFT,SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SIZE) //vpgr_size |
| s_add_u32 s_vgpr_size_byte, s_vgpr_size_byte, 1 |
| s_lshl_b32 s_vgpr_size_byte, s_vgpr_size_byte, (2+8) //Number of VGPRs = (vgpr_size + 1) * 4 * 64 * 4 (non-zero value) //FIXME for GFX, zero is possible |
| end |
| |
| function get_sgpr_size_bytes(s_sgpr_size_byte) |
| s_getreg_b32 s_sgpr_size_byte, hwreg(HW_REG_GPR_ALLOC,SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SHIFT,SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SIZE) //spgr_size |
| s_add_u32 s_sgpr_size_byte, s_sgpr_size_byte, 1 |
| s_lshl_b32 s_sgpr_size_byte, s_sgpr_size_byte, 6 //Number of SGPRs = (sgpr_size + 1) * 16 *4 (non-zero value) |
| end |
| |
| function get_hwreg_size_bytes |
| return 128 //HWREG size 128 bytes |
| end |
| |
| function set_status_without_spi_prio(status, tmp) |
| // Do not restore STATUS.SPI_PRIO since scheduler may have raised it. |
| s_lshr_b32 tmp, status, SQ_WAVE_STATUS_POST_SPI_PRIO_SHIFT |
| s_setreg_b32 hwreg(HW_REG_STATUS, SQ_WAVE_STATUS_POST_SPI_PRIO_SHIFT, SQ_WAVE_STATUS_POST_SPI_PRIO_SIZE), tmp |
| s_nop 0x2 // avoid S_SETREG => S_SETREG hazard |
| s_setreg_b32 hwreg(HW_REG_STATUS, SQ_WAVE_STATUS_PRE_SPI_PRIO_SHIFT, SQ_WAVE_STATUS_PRE_SPI_PRIO_SIZE), status |
| end |