| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # Mellanox switch drivers configuration |
| # |
| |
| config MLXSW_CORE |
| tristate "Mellanox Technologies Switch ASICs support" |
| select NET_DEVLINK |
| select MLXFW |
| help |
| This driver supports Mellanox Technologies Switch ASICs family. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mlxsw_core. |
| |
| config MLXSW_CORE_HWMON |
| bool "HWMON support for Mellanox Technologies Switch ASICs" |
| depends on MLXSW_CORE && HWMON |
| depends on !(MLXSW_CORE=y && HWMON=m) |
| default y |
| help |
| Say Y here if you want to expose HWMON interface on mlxsw devices. |
| |
| config MLXSW_CORE_THERMAL |
| bool "Thermal zone support for Mellanox Technologies Switch ASICs" |
| depends on MLXSW_CORE && THERMAL |
| default y |
| help |
| Say Y here if you want to automatically control fans speed according |
| ambient temperature reported by ASIC. |
| |
| config MLXSW_PCI |
| tristate "PCI bus implementation for Mellanox Technologies Switch ASICs" |
| depends on PCI && HAS_IOMEM && MLXSW_CORE |
| default m |
| help |
| This is PCI bus implementation for Mellanox Technologies Switch ASICs. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mlxsw_pci. |
| |
| config MLXSW_I2C |
| tristate "I2C bus implementation for Mellanox Technologies Switch ASICs" |
| depends on I2C && MLXSW_CORE |
| default m |
| help |
| This is I2C bus implementation for Mellanox Technologies Switch ASICs. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mlxsw_i2c. |
| |
| config MLXSW_SWITCHIB |
| tristate "Mellanox Technologies SwitchIB and SwitchIB-2 support" |
| depends on MLXSW_CORE && MLXSW_PCI && NET_SWITCHDEV |
| default m |
| help |
| This driver supports Mellanox Technologies SwitchIB and SwitchIB-2 |
| Infiniband Switch ASICs. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mlxsw_switchib. |
| |
| config MLXSW_SWITCHX2 |
| tristate "Mellanox Technologies SwitchX-2 support" |
| depends on MLXSW_CORE && MLXSW_PCI && NET_SWITCHDEV |
| default m |
| help |
| This driver supports Mellanox Technologies SwitchX-2 Ethernet |
| Switch ASICs. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mlxsw_switchx2. |
| |
| config MLXSW_SPECTRUM |
| tristate "Mellanox Technologies Spectrum family support" |
| depends on MLXSW_CORE && MLXSW_PCI && NET_SWITCHDEV && VLAN_8021Q |
| depends on PSAMPLE || PSAMPLE=n |
| depends on BRIDGE || BRIDGE=n |
| depends on IPV6 || IPV6=n |
| depends on NET_IPGRE || NET_IPGRE=n |
| depends on IPV6_GRE || IPV6_GRE=n |
| depends on VXLAN || VXLAN=n |
| select GENERIC_ALLOCATOR |
| select PARMAN |
| select OBJAGG |
| imply PTP_1588_CLOCK |
| select NET_PTP_CLASSIFY if PTP_1588_CLOCK |
| default m |
| help |
| This driver supports Mellanox Technologies |
| Spectrum/Spectrum-2/Spectrum-3 Ethernet Switch ASICs. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mlxsw_spectrum. |
| |
| config MLXSW_SPECTRUM_DCB |
| bool "Data Center Bridging (DCB) support" |
| depends on MLXSW_SPECTRUM && DCB |
| default y |
| help |
| Say Y here if you want to use Data Center Bridging (DCB) in the |
| driver. |
| |
| config MLXSW_MINIMAL |
| tristate "Mellanox Technologies minimal I2C support" |
| depends on MLXSW_CORE && MLXSW_I2C |
| default m |
| help |
| This driver supports I2C access for Mellanox Technologies Switch |
| ASICs. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mlxsw_minimal. |
