| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include <linux/bitops.h> |
| #include <linux/slab.h> |
| #include <linux/blkdev.h> |
| #include <linux/sched/mm.h> |
| #include <linux/atomic.h> |
| #include <linux/vmalloc.h> |
| #include "ctree.h" |
| #include "volumes.h" |
| #include "zoned.h" |
| #include "rcu-string.h" |
| #include "disk-io.h" |
| #include "block-group.h" |
| #include "transaction.h" |
| #include "dev-replace.h" |
| #include "space-info.h" |
| |
| /* Maximum number of zones to report per blkdev_report_zones() call */ |
| #define BTRFS_REPORT_NR_ZONES 4096 |
| /* Invalid allocation pointer value for missing devices */ |
| #define WP_MISSING_DEV ((u64)-1) |
| /* Pseudo write pointer value for conventional zone */ |
| #define WP_CONVENTIONAL ((u64)-2) |
| |
| /* |
| * Location of the first zone of superblock logging zone pairs. |
| * |
| * - primary superblock: 0B (zone 0) |
| * - first copy: 512G (zone starting at that offset) |
| * - second copy: 4T (zone starting at that offset) |
| */ |
| #define BTRFS_SB_LOG_PRIMARY_OFFSET (0ULL) |
| #define BTRFS_SB_LOG_FIRST_OFFSET (512ULL * SZ_1G) |
| #define BTRFS_SB_LOG_SECOND_OFFSET (4096ULL * SZ_1G) |
| |
| #define BTRFS_SB_LOG_FIRST_SHIFT const_ilog2(BTRFS_SB_LOG_FIRST_OFFSET) |
| #define BTRFS_SB_LOG_SECOND_SHIFT const_ilog2(BTRFS_SB_LOG_SECOND_OFFSET) |
| |
| /* Number of superblock log zones */ |
| #define BTRFS_NR_SB_LOG_ZONES 2 |
| |
| /* |
| * Minimum of active zones we need: |
| * |
| * - BTRFS_SUPER_MIRROR_MAX zones for superblock mirrors |
| * - 3 zones to ensure at least one zone per SYSTEM, META and DATA block group |
| * - 1 zone for tree-log dedicated block group |
| * - 1 zone for relocation |
| */ |
| #define BTRFS_MIN_ACTIVE_ZONES (BTRFS_SUPER_MIRROR_MAX + 5) |
| |
| /* |
| * Minimum / maximum supported zone size. Currently, SMR disks have a zone |
| * size of 256MiB, and we are expecting ZNS drives to be in the 1-4GiB range. |
| * We do not expect the zone size to become larger than 8GiB or smaller than |
| * 4MiB in the near future. |
| */ |
| #define BTRFS_MAX_ZONE_SIZE SZ_8G |
| #define BTRFS_MIN_ZONE_SIZE SZ_4M |
| |
| #define SUPER_INFO_SECTORS ((u64)BTRFS_SUPER_INFO_SIZE >> SECTOR_SHIFT) |
| |
| static inline bool sb_zone_is_full(const struct blk_zone *zone) |
| { |
| return (zone->cond == BLK_ZONE_COND_FULL) || |
| (zone->wp + SUPER_INFO_SECTORS > zone->start + zone->capacity); |
| } |
| |
| static int copy_zone_info_cb(struct blk_zone *zone, unsigned int idx, void *data) |
| { |
| struct blk_zone *zones = data; |
| |
| memcpy(&zones[idx], zone, sizeof(*zone)); |
| |
| return 0; |
| } |
| |
| static int sb_write_pointer(struct block_device *bdev, struct blk_zone *zones, |
| u64 *wp_ret) |
| { |
| bool empty[BTRFS_NR_SB_LOG_ZONES]; |
| bool full[BTRFS_NR_SB_LOG_ZONES]; |
| sector_t sector; |
| int i; |
| |
| for (i = 0; i < BTRFS_NR_SB_LOG_ZONES; i++) { |
| ASSERT(zones[i].type != BLK_ZONE_TYPE_CONVENTIONAL); |
| empty[i] = (zones[i].cond == BLK_ZONE_COND_EMPTY); |
| full[i] = sb_zone_is_full(&zones[i]); |
| } |
| |
| /* |
| * Possible states of log buffer zones |
| * |
| * Empty[0] In use[0] Full[0] |
| * Empty[1] * x 0 |
| * In use[1] 0 x 0 |
| * Full[1] 1 1 C |
| * |
| * Log position: |
| * *: Special case, no superblock is written |
| * 0: Use write pointer of zones[0] |
| * 1: Use write pointer of zones[1] |
| * C: Compare super blocks from zones[0] and zones[1], use the latest |
| * one determined by generation |
| * x: Invalid state |
| */ |
| |
| if (empty[0] && empty[1]) { |
| /* Special case to distinguish no superblock to read */ |
| *wp_ret = zones[0].start << SECTOR_SHIFT; |
| return -ENOENT; |
| } else if (full[0] && full[1]) { |
| /* Compare two super blocks */ |
| struct address_space *mapping = bdev->bd_inode->i_mapping; |
| struct page *page[BTRFS_NR_SB_LOG_ZONES]; |
| struct btrfs_super_block *super[BTRFS_NR_SB_LOG_ZONES]; |
| int i; |
| |
| for (i = 0; i < BTRFS_NR_SB_LOG_ZONES; i++) { |
| u64 bytenr; |
| |
| bytenr = ((zones[i].start + zones[i].len) |
| << SECTOR_SHIFT) - BTRFS_SUPER_INFO_SIZE; |
| |
| page[i] = read_cache_page_gfp(mapping, |
| bytenr >> PAGE_SHIFT, GFP_NOFS); |
| if (IS_ERR(page[i])) { |
| if (i == 1) |
| btrfs_release_disk_super(super[0]); |
| return PTR_ERR(page[i]); |
| } |
| super[i] = page_address(page[i]); |
| } |
| |
| if (super[0]->generation > super[1]->generation) |
| sector = zones[1].start; |
| else |
| sector = zones[0].start; |
| |
| for (i = 0; i < BTRFS_NR_SB_LOG_ZONES; i++) |
| btrfs_release_disk_super(super[i]); |
| } else if (!full[0] && (empty[1] || full[1])) { |
| sector = zones[0].wp; |
| } else if (full[0]) { |
| sector = zones[1].wp; |
| } else { |
| return -EUCLEAN; |
| } |
| *wp_ret = sector << SECTOR_SHIFT; |
| return 0; |
| } |
| |
| /* |
| * Get the first zone number of the superblock mirror |
| */ |
| static inline u32 sb_zone_number(int shift, int mirror) |
| { |
| u64 zone; |
| |
| ASSERT(mirror < BTRFS_SUPER_MIRROR_MAX); |
| switch (mirror) { |
| case 0: zone = 0; break; |
| case 1: zone = 1ULL << (BTRFS_SB_LOG_FIRST_SHIFT - shift); break; |
| case 2: zone = 1ULL << (BTRFS_SB_LOG_SECOND_SHIFT - shift); break; |
| } |
| |
| ASSERT(zone <= U32_MAX); |
| |
| return (u32)zone; |
| } |
| |
| static inline sector_t zone_start_sector(u32 zone_number, |
| struct block_device *bdev) |
| { |
| return (sector_t)zone_number << ilog2(bdev_zone_sectors(bdev)); |
| } |
| |
| static inline u64 zone_start_physical(u32 zone_number, |
| struct btrfs_zoned_device_info *zone_info) |
| { |
| return (u64)zone_number << zone_info->zone_size_shift; |
| } |
| |
| /* |
| * Emulate blkdev_report_zones() for a non-zoned device. It slices up the block |
| * device into static sized chunks and fake a conventional zone on each of |
| * them. |
| */ |
| static int emulate_report_zones(struct btrfs_device *device, u64 pos, |
| struct blk_zone *zones, unsigned int nr_zones) |
| { |
| const sector_t zone_sectors = device->fs_info->zone_size >> SECTOR_SHIFT; |
| sector_t bdev_size = bdev_nr_sectors(device->bdev); |
| unsigned int i; |
| |
| pos >>= SECTOR_SHIFT; |
| for (i = 0; i < nr_zones; i++) { |
| zones[i].start = i * zone_sectors + pos; |
| zones[i].len = zone_sectors; |
| zones[i].capacity = zone_sectors; |
| zones[i].wp = zones[i].start + zone_sectors; |
| zones[i].type = BLK_ZONE_TYPE_CONVENTIONAL; |
| zones[i].cond = BLK_ZONE_COND_NOT_WP; |
| |
| if (zones[i].wp >= bdev_size) { |
| i++; |
| break; |
| } |
| } |
| |
| return i; |
| } |
| |
| static int btrfs_get_dev_zones(struct btrfs_device *device, u64 pos, |
| struct blk_zone *zones, unsigned int *nr_zones) |
| { |
| struct btrfs_zoned_device_info *zinfo = device->zone_info; |
| u32 zno; |
| int ret; |
| |
| if (!*nr_zones) |
| return 0; |
| |
| if (!bdev_is_zoned(device->bdev)) { |
| ret = emulate_report_zones(device, pos, zones, *nr_zones); |
| *nr_zones = ret; |
| return 0; |
| } |
| |
| /* Check cache */ |
| if (zinfo->zone_cache) { |
| unsigned int i; |
| |
| ASSERT(IS_ALIGNED(pos, zinfo->zone_size)); |
| zno = pos >> zinfo->zone_size_shift; |
| /* |
| * We cannot report zones beyond the zone end. So, it is OK to |
| * cap *nr_zones to at the end. |
| */ |
| *nr_zones = min_t(u32, *nr_zones, zinfo->nr_zones - zno); |
| |
| for (i = 0; i < *nr_zones; i++) { |
| struct blk_zone *zone_info; |
| |
| zone_info = &zinfo->zone_cache[zno + i]; |
| if (!zone_info->len) |
| break; |
| } |
| |
| if (i == *nr_zones) { |
| /* Cache hit on all the zones */ |
| memcpy(zones, zinfo->zone_cache + zno, |
| sizeof(*zinfo->zone_cache) * *nr_zones); |
| return 0; |
| } |
| } |
| |
| ret = blkdev_report_zones(device->bdev, pos >> SECTOR_SHIFT, *nr_zones, |
| copy_zone_info_cb, zones); |
| if (ret < 0) { |
| btrfs_err_in_rcu(device->fs_info, |
| "zoned: failed to read zone %llu on %s (devid %llu)", |
| pos, rcu_str_deref(device->name), |
| device->devid); |
| return ret; |
| } |
| *nr_zones = ret; |
| if (!ret) |
| return -EIO; |
| |
| /* Populate cache */ |
| if (zinfo->zone_cache) |
| memcpy(zinfo->zone_cache + zno, zones, |
| sizeof(*zinfo->zone_cache) * *nr_zones); |
| |
| return 0; |
| } |
| |
| /* The emulated zone size is determined from the size of device extent */ |
| static int calculate_emulated_zone_size(struct btrfs_fs_info *fs_info) |
| { |
| struct btrfs_path *path; |
| struct btrfs_root *root = fs_info->dev_root; |
| struct btrfs_key key; |
| struct extent_buffer *leaf; |
| struct btrfs_dev_extent *dext; |
| int ret = 0; |
| |
| key.objectid = 1; |
| key.type = BTRFS_DEV_EXTENT_KEY; |
| key.offset = 0; |
| |
| path = btrfs_alloc_path(); |
| if (!path) |
| return -ENOMEM; |
| |
| ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); |
| if (ret < 0) |
| goto out; |
| |
| if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) { |
| ret = btrfs_next_leaf(root, path); |
| if (ret < 0) |
| goto out; |
| /* No dev extents at all? Not good */ |
| if (ret > 0) { |
| ret = -EUCLEAN; |
| goto out; |
| } |
| } |
| |
| leaf = path->nodes[0]; |
| dext = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_dev_extent); |
| fs_info->zone_size = btrfs_dev_extent_length(leaf, dext); |
| ret = 0; |
| |
| out: |
| btrfs_free_path(path); |
| |
| return ret; |
| } |
| |
| int btrfs_get_dev_zone_info_all_devices(struct btrfs_fs_info *fs_info) |
| { |
| struct btrfs_fs_devices *fs_devices = fs_info->fs_devices; |
| struct btrfs_device *device; |
| int ret = 0; |
| |
| /* fs_info->zone_size might not set yet. Use the incomapt flag here. */ |
| if (!btrfs_fs_incompat(fs_info, ZONED)) |
| return 0; |
| |
| mutex_lock(&fs_devices->device_list_mutex); |
| list_for_each_entry(device, &fs_devices->devices, dev_list) { |
| /* We can skip reading of zone info for missing devices */ |
| if (!device->bdev) |
| continue; |
| |
| ret = btrfs_get_dev_zone_info(device, true); |
| if (ret) |
| break; |
| } |
| mutex_unlock(&fs_devices->device_list_mutex); |
| |
| return ret; |
| } |
| |
| int btrfs_get_dev_zone_info(struct btrfs_device *device, bool populate_cache) |
| { |
| struct btrfs_fs_info *fs_info = device->fs_info; |
| struct btrfs_zoned_device_info *zone_info = NULL; |
| struct block_device *bdev = device->bdev; |
| unsigned int max_active_zones; |
| unsigned int nactive; |
| sector_t nr_sectors; |
| sector_t sector = 0; |
| struct blk_zone *zones = NULL; |
| unsigned int i, nreported = 0, nr_zones; |
| sector_t zone_sectors; |
| char *model, *emulated; |
| int ret; |
| |
| /* |
| * Cannot use btrfs_is_zoned here, since fs_info::zone_size might not |
| * yet be set. |
| */ |
| if (!btrfs_fs_incompat(fs_info, ZONED)) |
| return 0; |
| |
| if (device->zone_info) |
| return 0; |
| |
| zone_info = kzalloc(sizeof(*zone_info), GFP_KERNEL); |
| if (!zone_info) |
| return -ENOMEM; |
| |
| device->zone_info = zone_info; |
| |
| if (!bdev_is_zoned(bdev)) { |
| if (!fs_info->zone_size) { |
| ret = calculate_emulated_zone_size(fs_info); |
| if (ret) |
| goto out; |
| } |
| |
| ASSERT(fs_info->zone_size); |
| zone_sectors = fs_info->zone_size >> SECTOR_SHIFT; |
| } else { |
| zone_sectors = bdev_zone_sectors(bdev); |
| } |
| |
| /* Check if it's power of 2 (see is_power_of_2) */ |
| ASSERT(zone_sectors != 0 && (zone_sectors & (zone_sectors - 1)) == 0); |
| zone_info->zone_size = zone_sectors << SECTOR_SHIFT; |
| |
| /* We reject devices with a zone size larger than 8GB */ |
| if (zone_info->zone_size > BTRFS_MAX_ZONE_SIZE) { |
| btrfs_err_in_rcu(fs_info, |
| "zoned: %s: zone size %llu larger than supported maximum %llu", |
| rcu_str_deref(device->name), |
| zone_info->zone_size, BTRFS_MAX_ZONE_SIZE); |
| ret = -EINVAL; |
| goto out; |
| } else if (zone_info->zone_size < BTRFS_MIN_ZONE_SIZE) { |
| btrfs_err_in_rcu(fs_info, |
| "zoned: %s: zone size %llu smaller than supported minimum %u", |
| rcu_str_deref(device->name), |
| zone_info->zone_size, BTRFS_MIN_ZONE_SIZE); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| nr_sectors = bdev_nr_sectors(bdev); |
| zone_info->zone_size_shift = ilog2(zone_info->zone_size); |
| zone_info->nr_zones = nr_sectors >> ilog2(zone_sectors); |
| if (!IS_ALIGNED(nr_sectors, zone_sectors)) |
| zone_info->nr_zones++; |
| |
| max_active_zones = bdev_max_active_zones(bdev); |
| if (max_active_zones && max_active_zones < BTRFS_MIN_ACTIVE_ZONES) { |
| btrfs_err_in_rcu(fs_info, |
| "zoned: %s: max active zones %u is too small, need at least %u active zones", |
| rcu_str_deref(device->name), max_active_zones, |
| BTRFS_MIN_ACTIVE_ZONES); |
| ret = -EINVAL; |
| goto out; |
| } |
| zone_info->max_active_zones = max_active_zones; |
| |
| zone_info->seq_zones = bitmap_zalloc(zone_info->nr_zones, GFP_KERNEL); |
| if (!zone_info->seq_zones) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| zone_info->empty_zones = bitmap_zalloc(zone_info->nr_zones, GFP_KERNEL); |
| if (!zone_info->empty_zones) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| zone_info->active_zones = bitmap_zalloc(zone_info->nr_zones, GFP_KERNEL); |
| if (!zone_info->active_zones) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| zones = kcalloc(BTRFS_REPORT_NR_ZONES, sizeof(struct blk_zone), GFP_KERNEL); |
| if (!zones) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* |
| * Enable zone cache only for a zoned device. On a non-zoned device, we |
| * fill the zone info with emulated CONVENTIONAL zones, so no need to |
| * use the cache. |
| */ |
| if (populate_cache && bdev_is_zoned(device->bdev)) { |
| zone_info->zone_cache = vzalloc(sizeof(struct blk_zone) * |
| zone_info->nr_zones); |
| if (!zone_info->zone_cache) { |
| btrfs_err_in_rcu(device->fs_info, |
| "zoned: failed to allocate zone cache for %s", |
| rcu_str_deref(device->name)); |
| ret = -ENOMEM; |
| goto out; |
| } |
| } |
| |
| /* Get zones type */ |
| nactive = 0; |
| while (sector < nr_sectors) { |
| nr_zones = BTRFS_REPORT_NR_ZONES; |
| ret = btrfs_get_dev_zones(device, sector << SECTOR_SHIFT, zones, |
| &nr_zones); |
| if (ret) |
| goto out; |
| |
| for (i = 0; i < nr_zones; i++) { |
| if (zones[i].type == BLK_ZONE_TYPE_SEQWRITE_REQ) |
| __set_bit(nreported, zone_info->seq_zones); |
| switch (zones[i].cond) { |
| case BLK_ZONE_COND_EMPTY: |
| __set_bit(nreported, zone_info->empty_zones); |
| break; |
| case BLK_ZONE_COND_IMP_OPEN: |
| case BLK_ZONE_COND_EXP_OPEN: |
| case BLK_ZONE_COND_CLOSED: |
| __set_bit(nreported, zone_info->active_zones); |
| nactive++; |
| break; |
| } |
| nreported++; |
| } |
| sector = zones[nr_zones - 1].start + zones[nr_zones - 1].len; |
| } |
| |
| if (nreported != zone_info->nr_zones) { |
| btrfs_err_in_rcu(device->fs_info, |
| "inconsistent number of zones on %s (%u/%u)", |
| rcu_str_deref(device->name), nreported, |
| zone_info->nr_zones); |
| ret = -EIO; |
| goto out; |
| } |
| |
| if (max_active_zones) { |
| if (nactive > max_active_zones) { |
| btrfs_err_in_rcu(device->fs_info, |
| "zoned: %u active zones on %s exceeds max_active_zones %u", |
| nactive, rcu_str_deref(device->name), |
| max_active_zones); |
| ret = -EIO; |
| goto out; |
| } |
| atomic_set(&zone_info->active_zones_left, |
| max_active_zones - nactive); |
| } |
| |
| /* Validate superblock log */ |
| nr_zones = BTRFS_NR_SB_LOG_ZONES; |
| for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) { |
| u32 sb_zone; |
| u64 sb_wp; |
| int sb_pos = BTRFS_NR_SB_LOG_ZONES * i; |
| |
| sb_zone = sb_zone_number(zone_info->zone_size_shift, i); |
| if (sb_zone + 1 >= zone_info->nr_zones) |
| continue; |
| |
| ret = btrfs_get_dev_zones(device, |
| zone_start_physical(sb_zone, zone_info), |
| &zone_info->sb_zones[sb_pos], |
| &nr_zones); |
| if (ret) |
| goto out; |
| |
| if (nr_zones != BTRFS_NR_SB_LOG_ZONES) { |
| btrfs_err_in_rcu(device->fs_info, |
| "zoned: failed to read super block log zone info at devid %llu zone %u", |
| device->devid, sb_zone); |
| ret = -EUCLEAN; |
| goto out; |
| } |
| |
| /* |
| * If zones[0] is conventional, always use the beginning of the |
| * zone to record superblock. No need to validate in that case. |
| */ |
| if (zone_info->sb_zones[BTRFS_NR_SB_LOG_ZONES * i].type == |
| BLK_ZONE_TYPE_CONVENTIONAL) |
| continue; |
| |
| ret = sb_write_pointer(device->bdev, |
| &zone_info->sb_zones[sb_pos], &sb_wp); |
| if (ret != -ENOENT && ret) { |
| btrfs_err_in_rcu(device->fs_info, |
| "zoned: super block log zone corrupted devid %llu zone %u", |
| device->devid, sb_zone); |
| ret = -EUCLEAN; |
| goto out; |
| } |
| } |
| |
| |
| kfree(zones); |
| |
| switch (bdev_zoned_model(bdev)) { |
| case BLK_ZONED_HM: |
| model = "host-managed zoned"; |
| emulated = ""; |
| break; |
| case BLK_ZONED_HA: |
| model = "host-aware zoned"; |
| emulated = ""; |
| break; |
| case BLK_ZONED_NONE: |
| model = "regular"; |
| emulated = "emulated "; |
| break; |
| default: |
| /* Just in case */ |
| btrfs_err_in_rcu(fs_info, "zoned: unsupported model %d on %s", |
| bdev_zoned_model(bdev), |
| rcu_str_deref(device->name)); |
| ret = -EOPNOTSUPP; |
| goto out_free_zone_info; |
| } |
| |
| btrfs_info_in_rcu(fs_info, |
| "%s block device %s, %u %szones of %llu bytes", |
| model, rcu_str_deref(device->name), zone_info->nr_zones, |
| emulated, zone_info->zone_size); |
| |
| return 0; |
| |
| out: |
| kfree(zones); |
| out_free_zone_info: |
| btrfs_destroy_dev_zone_info(device); |
| |
| return ret; |
| } |
| |
| void btrfs_destroy_dev_zone_info(struct btrfs_device *device) |
| { |
| struct btrfs_zoned_device_info *zone_info = device->zone_info; |
| |
| if (!zone_info) |
| return; |
| |
| bitmap_free(zone_info->active_zones); |
| bitmap_free(zone_info->seq_zones); |
| bitmap_free(zone_info->empty_zones); |
| vfree(zone_info->zone_cache); |
| kfree(zone_info); |
| device->zone_info = NULL; |
| } |
| |
| int btrfs_get_dev_zone(struct btrfs_device *device, u64 pos, |
| struct blk_zone *zone) |
| { |
| unsigned int nr_zones = 1; |
| int ret; |
| |
| ret = btrfs_get_dev_zones(device, pos, zone, &nr_zones); |
| if (ret != 0 || !nr_zones) |
| return ret ? ret : -EIO; |
| |
| return 0; |
| } |
| |
| int btrfs_check_zoned_mode(struct btrfs_fs_info *fs_info) |
| { |
| struct btrfs_fs_devices *fs_devices = fs_info->fs_devices; |
| struct btrfs_device *device; |
| u64 zoned_devices = 0; |
| u64 nr_devices = 0; |
| u64 zone_size = 0; |
| const bool incompat_zoned = btrfs_fs_incompat(fs_info, ZONED); |
| int ret = 0; |
| |
| /* Count zoned devices */ |
| list_for_each_entry(device, &fs_devices->devices, dev_list) { |
| enum blk_zoned_model model; |
| |
| if (!device->bdev) |
| continue; |
| |
| model = bdev_zoned_model(device->bdev); |
| /* |
| * A Host-Managed zoned device must be used as a zoned device. |
| * A Host-Aware zoned device and a non-zoned devices can be |
| * treated as a zoned device, if ZONED flag is enabled in the |
| * superblock. |
| */ |
| if (model == BLK_ZONED_HM || |
| (model == BLK_ZONED_HA && incompat_zoned) || |
| (model == BLK_ZONED_NONE && incompat_zoned)) { |
| struct btrfs_zoned_device_info *zone_info; |
| |
| zone_info = device->zone_info; |
| zoned_devices++; |
| if (!zone_size) { |
| zone_size = zone_info->zone_size; |
| } else if (zone_info->zone_size != zone_size) { |
| btrfs_err(fs_info, |
| "zoned: unequal block device zone sizes: have %llu found %llu", |
| device->zone_info->zone_size, |
| zone_size); |
| ret = -EINVAL; |
| goto out; |
| } |
| } |
| nr_devices++; |
| } |
| |
| if (!zoned_devices && !incompat_zoned) |
| goto out; |
| |
| if (!zoned_devices && incompat_zoned) { |
| /* No zoned block device found on ZONED filesystem */ |
| btrfs_err(fs_info, |
| "zoned: no zoned devices found on a zoned filesystem"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (zoned_devices && !incompat_zoned) { |
| btrfs_err(fs_info, |
| "zoned: mode not enabled but zoned device found"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (zoned_devices != nr_devices) { |
| btrfs_err(fs_info, |
| "zoned: cannot mix zoned and regular devices"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* |
| * stripe_size is always aligned to BTRFS_STRIPE_LEN in |
| * btrfs_create_chunk(). Since we want stripe_len == zone_size, |
| * check the alignment here. |
| */ |
| if (!IS_ALIGNED(zone_size, BTRFS_STRIPE_LEN)) { |
| btrfs_err(fs_info, |
| "zoned: zone size %llu not aligned to stripe %u", |
| zone_size, BTRFS_STRIPE_LEN); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (btrfs_fs_incompat(fs_info, MIXED_GROUPS)) { |
| btrfs_err(fs_info, "zoned: mixed block groups not supported"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| fs_info->zone_size = zone_size; |
| fs_info->fs_devices->chunk_alloc_policy = BTRFS_CHUNK_ALLOC_ZONED; |
| |
| /* |
| * Check mount options here, because we might change fs_info->zoned |
| * from fs_info->zone_size. |
| */ |
| ret = btrfs_check_mountopts_zoned(fs_info); |
| if (ret) |
| goto out; |
| |
| btrfs_info(fs_info, "zoned mode enabled with zone size %llu", zone_size); |
| out: |
| return ret; |
| } |
| |
| int btrfs_check_mountopts_zoned(struct btrfs_fs_info *info) |
| { |
| if (!btrfs_is_zoned(info)) |
| return 0; |
| |
| /* |
| * Space cache writing is not COWed. Disable that to avoid write errors |
| * in sequential zones. |
| */ |
| if (btrfs_test_opt(info, SPACE_CACHE)) { |
| btrfs_err(info, "zoned: space cache v1 is not supported"); |
| return -EINVAL; |
| } |
| |
| if (btrfs_test_opt(info, NODATACOW)) { |
| btrfs_err(info, "zoned: NODATACOW not supported"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int sb_log_location(struct block_device *bdev, struct blk_zone *zones, |
| int rw, u64 *bytenr_ret) |
| { |
| u64 wp; |
| int ret; |
| |
| if (zones[0].type == BLK_ZONE_TYPE_CONVENTIONAL) { |
| *bytenr_ret = zones[0].start << SECTOR_SHIFT; |
| return 0; |
| } |
| |
| ret = sb_write_pointer(bdev, zones, &wp); |
| if (ret != -ENOENT && ret < 0) |
| return ret; |
| |
| if (rw == WRITE) { |
| struct blk_zone *reset = NULL; |
| |
| if (wp == zones[0].start << SECTOR_SHIFT) |
| reset = &zones[0]; |
| else if (wp == zones[1].start << SECTOR_SHIFT) |
| reset = &zones[1]; |
| |
| if (reset && reset->cond != BLK_ZONE_COND_EMPTY) { |
| ASSERT(sb_zone_is_full(reset)); |
| |
| ret = blkdev_zone_mgmt(bdev, REQ_OP_ZONE_RESET, |
| reset->start, reset->len, |
| GFP_NOFS); |
| if (ret) |
| return ret; |
| |
| reset->cond = BLK_ZONE_COND_EMPTY; |
| reset->wp = reset->start; |
| } |
| } else if (ret != -ENOENT) { |
| /* |
| * For READ, we want the previous one. Move write pointer to |
| * the end of a zone, if it is at the head of a zone. |
| */ |
| u64 zone_end = 0; |
| |
| if (wp == zones[0].start << SECTOR_SHIFT) |
| zone_end = zones[1].start + zones[1].capacity; |
| else if (wp == zones[1].start << SECTOR_SHIFT) |
| zone_end = zones[0].start + zones[0].capacity; |
| if (zone_end) |
| wp = ALIGN_DOWN(zone_end << SECTOR_SHIFT, |
| BTRFS_SUPER_INFO_SIZE); |
| |
| wp -= BTRFS_SUPER_INFO_SIZE; |
| } |
| |
| *bytenr_ret = wp; |
| return 0; |
| |
| } |
| |
| int btrfs_sb_log_location_bdev(struct block_device *bdev, int mirror, int rw, |
| u64 *bytenr_ret) |
| { |
| struct blk_zone zones[BTRFS_NR_SB_LOG_ZONES]; |
| sector_t zone_sectors; |
| u32 sb_zone; |
| int ret; |
| u8 zone_sectors_shift; |
| sector_t nr_sectors; |
| u32 nr_zones; |
| |
| if (!bdev_is_zoned(bdev)) { |
| *bytenr_ret = btrfs_sb_offset(mirror); |
| return 0; |
| } |
| |
| ASSERT(rw == READ || rw == WRITE); |
| |
| zone_sectors = bdev_zone_sectors(bdev); |
| if (!is_power_of_2(zone_sectors)) |
| return -EINVAL; |
| zone_sectors_shift = ilog2(zone_sectors); |
| nr_sectors = bdev_nr_sectors(bdev); |
| nr_zones = nr_sectors >> zone_sectors_shift; |
| |
| sb_zone = sb_zone_number(zone_sectors_shift + SECTOR_SHIFT, mirror); |
| if (sb_zone + 1 >= nr_zones) |
| return -ENOENT; |
| |
| ret = blkdev_report_zones(bdev, zone_start_sector(sb_zone, bdev), |
| BTRFS_NR_SB_LOG_ZONES, copy_zone_info_cb, |
| zones); |
| if (ret < 0) |
| return ret; |
| if (ret != BTRFS_NR_SB_LOG_ZONES) |
| return -EIO; |
| |
| return sb_log_location(bdev, zones, rw, bytenr_ret); |
| } |
| |
| int btrfs_sb_log_location(struct btrfs_device *device, int mirror, int rw, |
| u64 *bytenr_ret) |
| { |
| struct btrfs_zoned_device_info *zinfo = device->zone_info; |
| u32 zone_num; |
| |
| /* |
| * For a zoned filesystem on a non-zoned block device, use the same |
| * super block locations as regular filesystem. Doing so, the super |
| * block can always be retrieved and the zoned flag of the volume |
| * detected from the super block information. |
| */ |
| if (!bdev_is_zoned(device->bdev)) { |
| *bytenr_ret = btrfs_sb_offset(mirror); |
| return 0; |
| } |
| |
| zone_num = sb_zone_number(zinfo->zone_size_shift, mirror); |
| if (zone_num + 1 >= zinfo->nr_zones) |
| return -ENOENT; |
| |
| return sb_log_location(device->bdev, |
| &zinfo->sb_zones[BTRFS_NR_SB_LOG_ZONES * mirror], |
| rw, bytenr_ret); |
| } |
| |
| static inline bool is_sb_log_zone(struct btrfs_zoned_device_info *zinfo, |
| int mirror) |
| { |
| u32 zone_num; |
| |
| if (!zinfo) |
| return false; |
| |
| zone_num = sb_zone_number(zinfo->zone_size_shift, mirror); |
| if (zone_num + 1 >= zinfo->nr_zones) |
| return false; |
| |
| if (!test_bit(zone_num, zinfo->seq_zones)) |
| return false; |
| |
| return true; |
| } |
| |
| int btrfs_advance_sb_log(struct btrfs_device *device, int mirror) |
| { |
| struct btrfs_zoned_device_info *zinfo = device->zone_info; |
| struct blk_zone *zone; |
| int i; |
| |
| if (!is_sb_log_zone(zinfo, mirror)) |
| return 0; |
| |
| zone = &zinfo->sb_zones[BTRFS_NR_SB_LOG_ZONES * mirror]; |
| for (i = 0; i < BTRFS_NR_SB_LOG_ZONES; i++) { |
| /* Advance the next zone */ |
| if (zone->cond == BLK_ZONE_COND_FULL) { |
| zone++; |
| continue; |
| } |
| |
| if (zone->cond == BLK_ZONE_COND_EMPTY) |
| zone->cond = BLK_ZONE_COND_IMP_OPEN; |
| |
| zone->wp += SUPER_INFO_SECTORS; |
| |
| if (sb_zone_is_full(zone)) { |
| /* |
| * No room left to write new superblock. Since |
| * superblock is written with REQ_SYNC, it is safe to |
| * finish the zone now. |
| * |
| * If the write pointer is exactly at the capacity, |
| * explicit ZONE_FINISH is not necessary. |
| */ |
| if (zone->wp != zone->start + zone->capacity) { |
| int ret; |
| |
| ret = blkdev_zone_mgmt(device->bdev, |
| REQ_OP_ZONE_FINISH, zone->start, |
| zone->len, GFP_NOFS); |
| if (ret) |
| return ret; |
| } |
| |
| zone->wp = zone->start + zone->len; |
| zone->cond = BLK_ZONE_COND_FULL; |
| } |
| return 0; |
| } |
| |
| /* All the zones are FULL. Should not reach here. */ |
| ASSERT(0); |
| return -EIO; |
| } |
| |
| int btrfs_reset_sb_log_zones(struct block_device *bdev, int mirror) |
| { |
| sector_t zone_sectors; |
| sector_t nr_sectors; |
| u8 zone_sectors_shift; |
| u32 sb_zone; |
| u32 nr_zones; |
| |
| zone_sectors = bdev_zone_sectors(bdev); |
| zone_sectors_shift = ilog2(zone_sectors); |
| nr_sectors = bdev_nr_sectors(bdev); |
| nr_zones = nr_sectors >> zone_sectors_shift; |
| |
| sb_zone = sb_zone_number(zone_sectors_shift + SECTOR_SHIFT, mirror); |
| if (sb_zone + 1 >= nr_zones) |
| return -ENOENT; |
| |
| return blkdev_zone_mgmt(bdev, REQ_OP_ZONE_RESET, |
| zone_start_sector(sb_zone, bdev), |
| zone_sectors * BTRFS_NR_SB_LOG_ZONES, GFP_NOFS); |
| } |
| |
| /** |
| * btrfs_find_allocatable_zones - find allocatable zones within a given region |
| * |
| * @device: the device to allocate a region on |
| * @hole_start: the position of the hole to allocate the region |
| * @num_bytes: size of wanted region |
| * @hole_end: the end of the hole |
| * @return: position of allocatable zones |
| * |
| * Allocatable region should not contain any superblock locations. |
| */ |
| u64 btrfs_find_allocatable_zones(struct btrfs_device *device, u64 hole_start, |
| u64 hole_end, u64 num_bytes) |
| { |
| struct btrfs_zoned_device_info *zinfo = device->zone_info; |
| const u8 shift = zinfo->zone_size_shift; |
| u64 nzones = num_bytes >> shift; |
| u64 pos = hole_start; |
| u64 begin, end; |
| bool have_sb; |
| int i; |
| |
| ASSERT(IS_ALIGNED(hole_start, zinfo->zone_size)); |
| ASSERT(IS_ALIGNED(num_bytes, zinfo->zone_size)); |
| |
| while (pos < hole_end) { |
| begin = pos >> shift; |
| end = begin + nzones; |
| |
| if (end > zinfo->nr_zones) |
| return hole_end; |
| |
| /* Check if zones in the region are all empty */ |
| if (btrfs_dev_is_sequential(device, pos) && |
| find_next_zero_bit(zinfo->empty_zones, end, begin) != end) { |
| pos += zinfo->zone_size; |
| continue; |
| } |
| |
| have_sb = false; |
| for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) { |
| u32 sb_zone; |
| u64 sb_pos; |
| |
| sb_zone = sb_zone_number(shift, i); |
| if (!(end <= sb_zone || |
| sb_zone + BTRFS_NR_SB_LOG_ZONES <= begin)) { |
| have_sb = true; |
| pos = zone_start_physical( |
| sb_zone + BTRFS_NR_SB_LOG_ZONES, zinfo); |
| break; |
| } |
| |
| /* We also need to exclude regular superblock positions */ |
| sb_pos = btrfs_sb_offset(i); |
| if (!(pos + num_bytes <= sb_pos || |
| sb_pos + BTRFS_SUPER_INFO_SIZE <= pos)) { |
| have_sb = true; |
| pos = ALIGN(sb_pos + BTRFS_SUPER_INFO_SIZE, |
| zinfo->zone_size); |
| break; |
| } |
| } |
| if (!have_sb) |
| break; |
| } |
| |
| return pos; |
| } |
| |
| static bool btrfs_dev_set_active_zone(struct btrfs_device *device, u64 pos) |
| { |
| struct btrfs_zoned_device_info *zone_info = device->zone_info; |
| unsigned int zno = (pos >> zone_info->zone_size_shift); |
| |
| /* We can use any number of zones */ |
| if (zone_info->max_active_zones == 0) |
| return true; |
| |
| if (!test_bit(zno, zone_info->active_zones)) { |
| /* Active zone left? */ |
| if (atomic_dec_if_positive(&zone_info->active_zones_left) < 0) |
| return false; |
| if (test_and_set_bit(zno, zone_info->active_zones)) { |
| /* Someone already set the bit */ |
| atomic_inc(&zone_info->active_zones_left); |
| } |
| } |
| |
| return true; |
| } |
| |
| static void btrfs_dev_clear_active_zone(struct btrfs_device *device, u64 pos) |
| { |
| struct btrfs_zoned_device_info *zone_info = device->zone_info; |
| unsigned int zno = (pos >> zone_info->zone_size_shift); |
| |
| /* We can use any number of zones */ |
| if (zone_info->max_active_zones == 0) |
| return; |
| |
| if (test_and_clear_bit(zno, zone_info->active_zones)) |
| atomic_inc(&zone_info->active_zones_left); |
| } |
| |
| int btrfs_reset_device_zone(struct btrfs_device *device, u64 physical, |
| u64 length, u64 *bytes) |
| { |
| int ret; |
| |
| *bytes = 0; |
| ret = blkdev_zone_mgmt(device->bdev, REQ_OP_ZONE_RESET, |
| physical >> SECTOR_SHIFT, length >> SECTOR_SHIFT, |
| GFP_NOFS); |
| if (ret) |
| return ret; |
| |
| *bytes = length; |
| while (length) { |
| btrfs_dev_set_zone_empty(device, physical); |
| btrfs_dev_clear_active_zone(device, physical); |
| physical += device->zone_info->zone_size; |
| length -= device->zone_info->zone_size; |
| } |
| |
| return 0; |
| } |
| |
| int btrfs_ensure_empty_zones(struct btrfs_device *device, u64 start, u64 size) |
| { |
| struct btrfs_zoned_device_info *zinfo = device->zone_info; |
| const u8 shift = zinfo->zone_size_shift; |
| unsigned long begin = start >> shift; |
| unsigned long end = (start + size) >> shift; |
| u64 pos; |
| int ret; |
| |
| ASSERT(IS_ALIGNED(start, zinfo->zone_size)); |
| ASSERT(IS_ALIGNED(size, zinfo->zone_size)); |
| |
| if (end > zinfo->nr_zones) |
| return -ERANGE; |
| |
| /* All the zones are conventional */ |
| if (find_next_bit(zinfo->seq_zones, begin, end) == end) |
| return 0; |
| |
| /* All the zones are sequential and empty */ |
| if (find_next_zero_bit(zinfo->seq_zones, begin, end) == end && |
| find_next_zero_bit(zinfo->empty_zones, begin, end) == end) |
| return 0; |
| |
| for (pos = start; pos < start + size; pos += zinfo->zone_size) { |
| u64 reset_bytes; |
| |
| if (!btrfs_dev_is_sequential(device, pos) || |
| btrfs_dev_is_empty_zone(device, pos)) |
| continue; |
| |
| /* Free regions should be empty */ |
| btrfs_warn_in_rcu( |
| device->fs_info, |
| "zoned: resetting device %s (devid %llu) zone %llu for allocation", |
| rcu_str_deref(device->name), device->devid, pos >> shift); |
| WARN_ON_ONCE(1); |
| |
| ret = btrfs_reset_device_zone(device, pos, zinfo->zone_size, |
| &reset_bytes); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Calculate an allocation pointer from the extent allocation information |
| * for a block group consist of conventional zones. It is pointed to the |
| * end of the highest addressed extent in the block group as an allocation |
| * offset. |
| */ |
| static int calculate_alloc_pointer(struct btrfs_block_group *cache, |
| u64 *offset_ret) |
| { |
| struct btrfs_fs_info *fs_info = cache->fs_info; |
| struct btrfs_root *root; |
| struct btrfs_path *path; |
| struct btrfs_key key; |
| struct btrfs_key found_key; |
| int ret; |
| u64 length; |
| |
| path = btrfs_alloc_path(); |
| if (!path) |
| return -ENOMEM; |
| |
| key.objectid = cache->start + cache->length; |
| key.type = 0; |
| key.offset = 0; |
| |
| root = btrfs_extent_root(fs_info, key.objectid); |
| ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); |
| /* We should not find the exact match */ |
| if (!ret) |
| ret = -EUCLEAN; |
| if (ret < 0) |
| goto out; |
| |
| ret = btrfs_previous_extent_item(root, path, cache->start); |
| if (ret) { |
| if (ret == 1) { |
| ret = 0; |
| *offset_ret = 0; |
| } |
| goto out; |
| } |
| |
| btrfs_item_key_to_cpu(path->nodes[0], &found_key, path->slots[0]); |
| |
| if (found_key.type == BTRFS_EXTENT_ITEM_KEY) |
| length = found_key.offset; |
| else |
| length = fs_info->nodesize; |
| |
| if (!(found_key.objectid >= cache->start && |
| found_key.objectid + length <= cache->start + cache->length)) { |
| ret = -EUCLEAN; |
| goto out; |
| } |
| *offset_ret = found_key.objectid + length - cache->start; |
| ret = 0; |
| |
| out: |
| btrfs_free_path(path); |
| return ret; |
| } |
| |
| int btrfs_load_block_group_zone_info(struct btrfs_block_group *cache, bool new) |
| { |
| struct btrfs_fs_info *fs_info = cache->fs_info; |
| struct extent_map_tree *em_tree = &fs_info->mapping_tree; |
| struct extent_map *em; |
| struct map_lookup *map; |
| struct btrfs_device *device; |
| u64 logical = cache->start; |
| u64 length = cache->length; |
| int ret; |
| int i; |
| unsigned int nofs_flag; |
| u64 *alloc_offsets = NULL; |
| u64 *caps = NULL; |
| u64 *physical = NULL; |
| unsigned long *active = NULL; |
| u64 last_alloc = 0; |
| u32 num_sequential = 0, num_conventional = 0; |
| |
| if (!btrfs_is_zoned(fs_info)) |
| return 0; |
| |
| /* Sanity check */ |
| if (!IS_ALIGNED(length, fs_info->zone_size)) { |
| btrfs_err(fs_info, |
| "zoned: block group %llu len %llu unaligned to zone size %llu", |
| logical, length, fs_info->zone_size); |
| return -EIO; |
| } |
| |
| /* Get the chunk mapping */ |
| read_lock(&em_tree->lock); |
| em = lookup_extent_mapping(em_tree, logical, length); |
| read_unlock(&em_tree->lock); |
| |
| if (!em) |
| return -EINVAL; |
| |
| map = em->map_lookup; |
| |
| cache->physical_map = kmemdup(map, map_lookup_size(map->num_stripes), GFP_NOFS); |
| if (!cache->physical_map) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| alloc_offsets = kcalloc(map->num_stripes, sizeof(*alloc_offsets), GFP_NOFS); |
| if (!alloc_offsets) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| caps = kcalloc(map->num_stripes, sizeof(*caps), GFP_NOFS); |
| if (!caps) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| physical = kcalloc(map->num_stripes, sizeof(*physical), GFP_NOFS); |
| if (!physical) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| active = bitmap_zalloc(map->num_stripes, GFP_NOFS); |
| if (!active) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| for (i = 0; i < map->num_stripes; i++) { |
| bool is_sequential; |
| struct blk_zone zone; |
| struct btrfs_dev_replace *dev_replace = &fs_info->dev_replace; |
| int dev_replace_is_ongoing = 0; |
| |
| device = map->stripes[i].dev; |
| physical[i] = map->stripes[i].physical; |
| |
| if (device->bdev == NULL) { |
| alloc_offsets[i] = WP_MISSING_DEV; |
| continue; |
| } |
| |
| is_sequential = btrfs_dev_is_sequential(device, physical[i]); |
| if (is_sequential) |
| num_sequential++; |
| else |
| num_conventional++; |
| |
| if (!is_sequential) { |
| alloc_offsets[i] = WP_CONVENTIONAL; |
| continue; |
| } |
| |
| /* |
| * This zone will be used for allocation, so mark this zone |
| * non-empty. |
| */ |
| btrfs_dev_clear_zone_empty(device, physical[i]); |
| |
| down_read(&dev_replace->rwsem); |
| dev_replace_is_ongoing = btrfs_dev_replace_is_ongoing(dev_replace); |
| if (dev_replace_is_ongoing && dev_replace->tgtdev != NULL) |
| btrfs_dev_clear_zone_empty(dev_replace->tgtdev, physical[i]); |
| up_read(&dev_replace->rwsem); |
| |
| /* |
| * The group is mapped to a sequential zone. Get the zone write |
| * pointer to determine the allocation offset within the zone. |
| */ |
| WARN_ON(!IS_ALIGNED(physical[i], fs_info->zone_size)); |
| nofs_flag = memalloc_nofs_save(); |
| ret = btrfs_get_dev_zone(device, physical[i], &zone); |
| memalloc_nofs_restore(nofs_flag); |
| if (ret == -EIO || ret == -EOPNOTSUPP) { |
| ret = 0; |
| alloc_offsets[i] = WP_MISSING_DEV; |
| continue; |
| } else if (ret) { |
| goto out; |
| } |
| |
| if (zone.type == BLK_ZONE_TYPE_CONVENTIONAL) { |
| btrfs_err_in_rcu(fs_info, |
| "zoned: unexpected conventional zone %llu on device %s (devid %llu)", |
| zone.start << SECTOR_SHIFT, |
| rcu_str_deref(device->name), device->devid); |
| ret = -EIO; |
| goto out; |
| } |
| |
| caps[i] = (zone.capacity << SECTOR_SHIFT); |
| |
| switch (zone.cond) { |
| case BLK_ZONE_COND_OFFLINE: |
| case BLK_ZONE_COND_READONLY: |
| btrfs_err(fs_info, |
| "zoned: offline/readonly zone %llu on device %s (devid %llu)", |
| physical[i] >> device->zone_info->zone_size_shift, |
| rcu_str_deref(device->name), device->devid); |
| alloc_offsets[i] = WP_MISSING_DEV; |
| break; |
| case BLK_ZONE_COND_EMPTY: |
| alloc_offsets[i] = 0; |
| break; |
| case BLK_ZONE_COND_FULL: |
| alloc_offsets[i] = caps[i]; |
| break; |
| default: |
| /* Partially used zone */ |
| alloc_offsets[i] = |
| ((zone.wp - zone.start) << SECTOR_SHIFT); |
| __set_bit(i, active); |
| break; |
| } |
| |
| /* |
| * Consider a zone as active if we can allow any number of |
| * active zones. |
| */ |
| if (!device->zone_info->max_active_zones) |
| __set_bit(i, active); |
| } |
| |
| if (num_sequential > 0) |
| cache->seq_zone = true; |
| |
| if (num_conventional > 0) { |
| /* |
| * Avoid calling calculate_alloc_pointer() for new BG. It |
| * is no use for new BG. It must be always 0. |
| * |
| * Also, we have a lock chain of extent buffer lock -> |
| * chunk mutex. For new BG, this function is called from |
| * btrfs_make_block_group() which is already taking the |
| * chunk mutex. Thus, we cannot call |
| * calculate_alloc_pointer() which takes extent buffer |
| * locks to avoid deadlock. |
| */ |
| |
| /* Zone capacity is always zone size in emulation */ |
| cache->zone_capacity = cache->length; |
| if (new) { |
| cache->alloc_offset = 0; |
| goto out; |
| } |
| ret = calculate_alloc_pointer(cache, &last_alloc); |
| if (ret || map->num_stripes == num_conventional) { |
| if (!ret) |
| cache->alloc_offset = last_alloc; |
| else |
| btrfs_err(fs_info, |
| "zoned: failed to determine allocation offset of bg %llu", |
| cache->start); |
| goto out; |
| } |
| } |
| |
| switch (map->type & BTRFS_BLOCK_GROUP_PROFILE_MASK) { |
| case 0: /* single */ |
| if (alloc_offsets[0] == WP_MISSING_DEV) { |
| btrfs_err(fs_info, |
| "zoned: cannot recover write pointer for zone %llu", |
| physical[0]); |
| ret = -EIO; |
| goto out; |
| } |
| cache->alloc_offset = alloc_offsets[0]; |
| cache->zone_capacity = caps[0]; |
| cache->zone_is_active = test_bit(0, active); |
| break; |
| case BTRFS_BLOCK_GROUP_DUP: |
| if (map->type & BTRFS_BLOCK_GROUP_DATA) { |
| btrfs_err(fs_info, "zoned: profile DUP not yet supported on data bg"); |
| ret = -EINVAL; |
| goto out; |
| } |
| if (alloc_offsets[0] == WP_MISSING_DEV) { |
| btrfs_err(fs_info, |
| "zoned: cannot recover write pointer for zone %llu", |
| physical[0]); |
| ret = -EIO; |
| goto out; |
| } |
| if (alloc_offsets[1] == WP_MISSING_DEV) { |
| btrfs_err(fs_info, |
| "zoned: cannot recover write pointer for zone %llu", |
| physical[1]); |
| ret = -EIO; |
| goto out; |
| } |
| if (alloc_offsets[0] != alloc_offsets[1]) { |
| btrfs_err(fs_info, |
| "zoned: write pointer offset mismatch of zones in DUP profile"); |
| ret = -EIO; |
| goto out; |
| } |
| if (test_bit(0, active) != test_bit(1, active)) { |
| if (!btrfs_zone_activate(cache)) { |
| ret = -EIO; |
| goto out; |
| } |
| } else { |
| cache->zone_is_active = test_bit(0, active); |
| } |
| cache->alloc_offset = alloc_offsets[0]; |
| cache->zone_capacity = min(caps[0], caps[1]); |
| break; |
| case BTRFS_BLOCK_GROUP_RAID1: |
| case BTRFS_BLOCK_GROUP_RAID0: |
| case BTRFS_BLOCK_GROUP_RAID10: |
| case BTRFS_BLOCK_GROUP_RAID5: |
| case BTRFS_BLOCK_GROUP_RAID6: |
| /* non-single profiles are not supported yet */ |
| default: |
| btrfs_err(fs_info, "zoned: profile %s not yet supported", |
| btrfs_bg_type_to_raid_name(map->type)); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (cache->zone_is_active) { |
| btrfs_get_block_group(cache); |
| spin_lock(&fs_info->zone_active_bgs_lock); |
| list_add_tail(&cache->active_bg_list, &fs_info->zone_active_bgs); |
| spin_unlock(&fs_info->zone_active_bgs_lock); |
| } |
| |
| out: |
| if (cache->alloc_offset > fs_info->zone_size) { |
| btrfs_err(fs_info, |
| "zoned: invalid write pointer %llu in block group %llu", |
| cache->alloc_offset, cache->start); |
| ret = -EIO; |
| } |
| |
| if (cache->alloc_offset > cache->zone_capacity) { |
| btrfs_err(fs_info, |
| "zoned: invalid write pointer %llu (larger than zone capacity %llu) in block group %llu", |
| cache->alloc_offset, cache->zone_capacity, |
| cache->start); |
| ret = -EIO; |
| } |
| |
| /* An extent is allocated after the write pointer */ |
| if (!ret && num_conventional && last_alloc > cache->alloc_offset) { |
| btrfs_err(fs_info, |
| "zoned: got wrong write pointer in BG %llu: %llu > %llu", |
| logical, last_alloc, cache->alloc_offset); |
| ret = -EIO; |
| } |
| |
| if (!ret) |
| cache->meta_write_pointer = cache->alloc_offset + cache->start; |
| |
| if (ret) { |
| kfree(cache->physical_map); |
| cache->physical_map = NULL; |
| } |
| bitmap_free(active); |
| kfree(physical); |
| kfree(caps); |
| kfree(alloc_offsets); |
| free_extent_map(em); |
| |
| return ret; |
| } |
| |
| void btrfs_calc_zone_unusable(struct btrfs_block_group *cache) |
| { |
| u64 unusable, free; |
| |
| if (!btrfs_is_zoned(cache->fs_info)) |
| return; |
| |
| WARN_ON(cache->bytes_super != 0); |
| unusable = (cache->alloc_offset - cache->used) + |
| (cache->length - cache->zone_capacity); |
| free = cache->zone_capacity - cache->alloc_offset; |
| |
| /* We only need ->free_space in ALLOC_SEQ block groups */ |
| cache->last_byte_to_unpin = (u64)-1; |
| cache->cached = BTRFS_CACHE_FINISHED; |
| cache->free_space_ctl->free_space = free; |
| cache->zone_unusable = unusable; |
| } |
| |
| void btrfs_redirty_list_add(struct btrfs_transaction *trans, |
| struct extent_buffer *eb) |
| { |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| |
| if (!btrfs_is_zoned(fs_info) || |
| btrfs_header_flag(eb, BTRFS_HEADER_FLAG_WRITTEN) || |
| !list_empty(&eb->release_list)) |
| return; |
| |
| set_extent_buffer_dirty(eb); |
| set_extent_bits_nowait(&trans->dirty_pages, eb->start, |
| eb->start + eb->len - 1, EXTENT_DIRTY); |
| memzero_extent_buffer(eb, 0, eb->len); |
| set_bit(EXTENT_BUFFER_NO_CHECK, &eb->bflags); |
| |
| spin_lock(&trans->releasing_ebs_lock); |
| list_add_tail(&eb->release_list, &trans->releasing_ebs); |
| spin_unlock(&trans->releasing_ebs_lock); |
| atomic_inc(&eb->refs); |
| } |
| |
| void btrfs_free_redirty_list(struct btrfs_transaction *trans) |
| { |
| spin_lock(&trans->releasing_ebs_lock); |
| while (!list_empty(&trans->releasing_ebs)) { |
| struct extent_buffer *eb; |
| |
| eb = list_first_entry(&trans->releasing_ebs, |
| struct extent_buffer, release_list); |
| list_del_init(&eb->release_list); |
| free_extent_buffer(eb); |
| } |
| spin_unlock(&trans->releasing_ebs_lock); |
| } |
| |
| bool btrfs_use_zone_append(struct btrfs_inode *inode, u64 start) |
| { |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; |
| struct btrfs_block_group *cache; |
| bool ret = false; |
| |
| if (!btrfs_is_zoned(fs_info)) |
| return false; |
| |
| if (!is_data_inode(&inode->vfs_inode)) |
| return false; |
| |
| /* |
| * Using REQ_OP_ZONE_APPNED for relocation can break assumptions on the |
| * extent layout the relocation code has. |
| * Furthermore we have set aside own block-group from which only the |
| * relocation "process" can allocate and make sure only one process at a |
| * time can add pages to an extent that gets relocated, so it's safe to |
| * use regular REQ_OP_WRITE for this special case. |
| */ |
| if (btrfs_is_data_reloc_root(inode->root)) |
| return false; |
| |
| cache = btrfs_lookup_block_group(fs_info, start); |
| ASSERT(cache); |
| if (!cache) |
| return false; |
| |
| ret = cache->seq_zone; |
| btrfs_put_block_group(cache); |
| |
| return ret; |
| } |
| |
| void btrfs_record_physical_zoned(struct inode *inode, u64 file_offset, |
| struct bio *bio) |
| { |
| struct btrfs_ordered_extent *ordered; |
| const u64 physical = bio->bi_iter.bi_sector << SECTOR_SHIFT; |
| |
| if (bio_op(bio) != REQ_OP_ZONE_APPEND) |
| return; |
| |
| ordered = btrfs_lookup_ordered_extent(BTRFS_I(inode), file_offset); |
| if (WARN_ON(!ordered)) |
| return; |
| |
| ordered->physical = physical; |
| ordered->bdev = bio->bi_bdev; |
| |
| btrfs_put_ordered_extent(ordered); |
| } |
| |
| void btrfs_rewrite_logical_zoned(struct btrfs_ordered_extent *ordered) |
| { |
| struct btrfs_inode *inode = BTRFS_I(ordered->inode); |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; |
| struct extent_map_tree *em_tree; |
| struct extent_map *em; |
| struct btrfs_ordered_sum *sum; |
| u64 orig_logical = ordered->disk_bytenr; |
| u64 *logical = NULL; |
| int nr, stripe_len; |
| |
| /* Zoned devices should not have partitions. So, we can assume it is 0 */ |
| ASSERT(!bdev_is_partition(ordered->bdev)); |
| if (WARN_ON(!ordered->bdev)) |
| return; |
| |
| if (WARN_ON(btrfs_rmap_block(fs_info, orig_logical, ordered->bdev, |
| ordered->physical, &logical, &nr, |
| &stripe_len))) |
| goto out; |
| |
| WARN_ON(nr != 1); |
| |
| if (orig_logical == *logical) |
| goto out; |
| |
| ordered->disk_bytenr = *logical; |
| |
| em_tree = &inode->extent_tree; |
| write_lock(&em_tree->lock); |
| em = search_extent_mapping(em_tree, ordered->file_offset, |
| ordered->num_bytes); |
| em->block_start = *logical; |
| free_extent_map(em); |
| write_unlock(&em_tree->lock); |
| |
| list_for_each_entry(sum, &ordered->list, list) { |
| if (*logical < orig_logical) |
| sum->bytenr -= orig_logical - *logical; |
| else |
| sum->bytenr += *logical - orig_logical; |
| } |
| |
| out: |
| kfree(logical); |
| } |
| |
| bool btrfs_check_meta_write_pointer(struct btrfs_fs_info *fs_info, |
| struct extent_buffer *eb, |
| struct btrfs_block_group **cache_ret) |
| { |
| struct btrfs_block_group *cache; |
| bool ret = true; |
| |
| if (!btrfs_is_zoned(fs_info)) |
| return true; |
| |
| cache = btrfs_lookup_block_group(fs_info, eb->start); |
| if (!cache) |
| return true; |
| |
| if (cache->meta_write_pointer != eb->start) { |
| btrfs_put_block_group(cache); |
| cache = NULL; |
| ret = false; |
| } else { |
| cache->meta_write_pointer = eb->start + eb->len; |
| } |
| |
| *cache_ret = cache; |
| |
| return ret; |
| } |
| |
| void btrfs_revert_meta_write_pointer(struct btrfs_block_group *cache, |
| struct extent_buffer *eb) |
| { |
| if (!btrfs_is_zoned(eb->fs_info) || !cache) |
| return; |
| |
| ASSERT(cache->meta_write_pointer == eb->start + eb->len); |
| cache->meta_write_pointer = eb->start; |
| } |
| |
| int btrfs_zoned_issue_zeroout(struct btrfs_device *device, u64 physical, u64 length) |
| { |
| if (!btrfs_dev_is_sequential(device, physical)) |
| return -EOPNOTSUPP; |
| |
| return blkdev_issue_zeroout(device->bdev, physical >> SECTOR_SHIFT, |
| length >> SECTOR_SHIFT, GFP_NOFS, 0); |
| } |
| |
| static int read_zone_info(struct btrfs_fs_info *fs_info, u64 logical, |
| struct blk_zone *zone) |
| { |
| struct btrfs_io_context *bioc = NULL; |
| u64 mapped_length = PAGE_SIZE; |
| unsigned int nofs_flag; |
| int nmirrors; |
| int i, ret; |
| |
| ret = btrfs_map_sblock(fs_info, BTRFS_MAP_GET_READ_MIRRORS, logical, |
| &mapped_length, &bioc); |
| if (ret || !bioc || mapped_length < PAGE_SIZE) { |
| btrfs_put_bioc(bioc); |
| return -EIO; |
| } |
| |
| if (bioc->map_type & BTRFS_BLOCK_GROUP_RAID56_MASK) |
| return -EINVAL; |
| |
| nofs_flag = memalloc_nofs_save(); |
| nmirrors = (int)bioc->num_stripes; |
| for (i = 0; i < nmirrors; i++) { |
| u64 physical = bioc->stripes[i].physical; |
| struct btrfs_device *dev = bioc->stripes[i].dev; |
| |
| /* Missing device */ |
| if (!dev->bdev) |
| continue; |
| |
| ret = btrfs_get_dev_zone(dev, physical, zone); |
| /* Failing device */ |
| if (ret == -EIO || ret == -EOPNOTSUPP) |
| continue; |
| break; |
| } |
| memalloc_nofs_restore(nofs_flag); |
| |
| return ret; |
| } |
| |
| /* |
| * Synchronize write pointer in a zone at @physical_start on @tgt_dev, by |
| * filling zeros between @physical_pos to a write pointer of dev-replace |
| * source device. |
| */ |
| int btrfs_sync_zone_write_pointer(struct btrfs_device *tgt_dev, u64 logical, |
| u64 physical_start, u64 physical_pos) |
| { |
| struct btrfs_fs_info *fs_info = tgt_dev->fs_info; |
| struct blk_zone zone; |
| u64 length; |
| u64 wp; |
| int ret; |
| |
| if (!btrfs_dev_is_sequential(tgt_dev, physical_pos)) |
| return 0; |
| |
| ret = read_zone_info(fs_info, logical, &zone); |
| if (ret) |
| return ret; |
| |
| wp = physical_start + ((zone.wp - zone.start) << SECTOR_SHIFT); |
| |
| if (physical_pos == wp) |
| return 0; |
| |
| if (physical_pos > wp) |
| return -EUCLEAN; |
| |
| length = wp - physical_pos; |
| return btrfs_zoned_issue_zeroout(tgt_dev, physical_pos, length); |
| } |
| |
| struct btrfs_device *btrfs_zoned_get_device(struct btrfs_fs_info *fs_info, |
| u64 logical, u64 length) |
| { |
| struct btrfs_device *device; |
| struct extent_map *em; |
| struct map_lookup *map; |
| |
| em = btrfs_get_chunk_map(fs_info, logical, length); |
| if (IS_ERR(em)) |
| return ERR_CAST(em); |
| |
| map = em->map_lookup; |
| /* We only support single profile for now */ |
| device = map->stripes[0].dev; |
| |
| free_extent_map(em); |
| |
| return device; |
| } |
| |
| /** |
| * Activate block group and underlying device zones |
| * |
| * @block_group: the block group to activate |
| * |
| * Return: true on success, false otherwise |
| */ |
| bool btrfs_zone_activate(struct btrfs_block_group *block_group) |
| { |
| struct btrfs_fs_info *fs_info = block_group->fs_info; |
| struct map_lookup *map; |
| struct btrfs_device *device; |
| u64 physical; |
| bool ret; |
| int i; |
| |
| if (!btrfs_is_zoned(block_group->fs_info)) |
| return true; |
| |
| map = block_group->physical_map; |
| |
| spin_lock(&block_group->lock); |
| if (block_group->zone_is_active) { |
| ret = true; |
| goto out_unlock; |
| } |
| |
| /* No space left */ |
| if (btrfs_zoned_bg_is_full(block_group)) { |
| ret = false; |
| goto out_unlock; |
| } |
| |
| for (i = 0; i < map->num_stripes; i++) { |
| device = map->stripes[i].dev; |
| physical = map->stripes[i].physical; |
| |
| if (device->zone_info->max_active_zones == 0) |
| continue; |
| |
| if (!btrfs_dev_set_active_zone(device, physical)) { |
| /* Cannot activate the zone */ |
| ret = false; |
| goto out_unlock; |
| } |
| } |
| |
| /* Successfully activated all the zones */ |
| block_group->zone_is_active = 1; |
| spin_unlock(&block_group->lock); |
| |
| /* For the active block group list */ |
| btrfs_get_block_group(block_group); |
| |
| spin_lock(&fs_info->zone_active_bgs_lock); |
| list_add_tail(&block_group->active_bg_list, &fs_info->zone_active_bgs); |
| spin_unlock(&fs_info->zone_active_bgs_lock); |
| |
| return true; |
| |
| out_unlock: |
| spin_unlock(&block_group->lock); |
| return ret; |
| } |
| |
| static int do_zone_finish(struct btrfs_block_group *block_group, bool fully_written) |
| { |
| struct btrfs_fs_info *fs_info = block_group->fs_info; |
| struct map_lookup *map; |
| bool need_zone_finish; |
| int ret = 0; |
| int i; |
| |
| spin_lock(&block_group->lock); |
| if (!block_group->zone_is_active) { |
| spin_unlock(&block_group->lock); |
| return 0; |
| } |
| |
| /* Check if we have unwritten allocated space */ |
| if ((block_group->flags & |
| (BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_SYSTEM)) && |
| block_group->start + block_group->alloc_offset > block_group->meta_write_pointer) { |
| spin_unlock(&block_group->lock); |
| return -EAGAIN; |
| } |
| |
| /* |
| * If we are sure that the block group is full (= no more room left for |
| * new allocation) and the IO for the last usable block is completed, we |
| * don't need to wait for the other IOs. This holds because we ensure |
| * the sequential IO submissions using the ZONE_APPEND command for data |
| * and block_group->meta_write_pointer for metadata. |
| */ |
| if (!fully_written) { |
| spin_unlock(&block_group->lock); |
| |
| ret = btrfs_inc_block_group_ro(block_group, false); |
| if (ret) |
| return ret; |
| |
| /* Ensure all writes in this block group finish */ |
| btrfs_wait_block_group_reservations(block_group); |
| /* No need to wait for NOCOW writers. Zoned mode does not allow that */ |
| btrfs_wait_ordered_roots(fs_info, U64_MAX, block_group->start, |
| block_group->length); |
| |
| spin_lock(&block_group->lock); |
| |
| /* |
| * Bail out if someone already deactivated the block group, or |
| * allocated space is left in the block group. |
| */ |
| if (!block_group->zone_is_active) { |
| spin_unlock(&block_group->lock); |
| btrfs_dec_block_group_ro(block_group); |
| return 0; |
| } |
| |
| if (block_group->reserved) { |
| spin_unlock(&block_group->lock); |
| btrfs_dec_block_group_ro(block_group); |
| return -EAGAIN; |
| } |
| } |
| |
| /* |
| * The block group is not fully allocated, so not fully written yet. We |
| * need to send ZONE_FINISH command to free up an active zone. |
| */ |
| need_zone_finish = !btrfs_zoned_bg_is_full(block_group); |
| |
| block_group->zone_is_active = 0; |
| block_group->alloc_offset = block_group->zone_capacity; |
| block_group->free_space_ctl->free_space = 0; |
| btrfs_clear_treelog_bg(block_group); |
| btrfs_clear_data_reloc_bg(block_group); |
| spin_unlock(&block_group->lock); |
| |
| map = block_group->physical_map; |
| for (i = 0; i < map->num_stripes; i++) { |
| struct btrfs_device *device = map->stripes[i].dev; |
| const u64 physical = map->stripes[i].physical; |
| |
| if (device->zone_info->max_active_zones == 0) |
| continue; |
| |
| if (need_zone_finish) { |
| ret = blkdev_zone_mgmt(device->bdev, REQ_OP_ZONE_FINISH, |
| physical >> SECTOR_SHIFT, |
| device->zone_info->zone_size >> SECTOR_SHIFT, |
| GFP_NOFS); |
| |
| if (ret) |
| return ret; |
| } |
| |
| btrfs_dev_clear_active_zone(device, physical); |
| } |
| |
| if (!fully_written) |
| btrfs_dec_block_group_ro(block_group); |
| |
| spin_lock(&fs_info->zone_active_bgs_lock); |
| ASSERT(!list_empty(&block_group->active_bg_list)); |
| list_del_init(&block_group->active_bg_list); |
| spin_unlock(&fs_info->zone_active_bgs_lock); |
| |
| /* For active_bg_list */ |
| btrfs_put_block_group(block_group); |
| |
| return 0; |
| } |
| |
| int btrfs_zone_finish(struct btrfs_block_group *block_group) |
| { |
| if (!btrfs_is_zoned(block_group->fs_info)) |
| return 0; |
| |
| return do_zone_finish(block_group, false); |
| } |
| |
| bool btrfs_can_activate_zone(struct btrfs_fs_devices *fs_devices, u64 flags) |
| { |
| struct btrfs_fs_info *fs_info = fs_devices->fs_info; |
| struct btrfs_device *device; |
| bool ret = false; |
| |
| if (!btrfs_is_zoned(fs_info)) |
| return true; |
| |
| /* Check if there is a device with active zones left */ |
| mutex_lock(&fs_info->chunk_mutex); |
| list_for_each_entry(device, &fs_devices->alloc_list, dev_alloc_list) { |
| struct btrfs_zoned_device_info *zinfo = device->zone_info; |
| |
| if (!device->bdev) |
| continue; |
| |
| if (!zinfo->max_active_zones || |
| atomic_read(&zinfo->active_zones_left)) { |
| ret = true; |
| break; |
| } |
| } |
| mutex_unlock(&fs_info->chunk_mutex); |
| |
| return ret; |
| } |
| |
| void btrfs_zone_finish_endio(struct btrfs_fs_info *fs_info, u64 logical, u64 length) |
| { |
| struct btrfs_block_group *block_group; |
| u64 min_alloc_bytes; |
| |
| if (!btrfs_is_zoned(fs_info)) |
| return; |
| |
| block_group = btrfs_lookup_block_group(fs_info, logical); |
| ASSERT(block_group); |
| |
| /* No MIXED_BG on zoned btrfs. */ |
| if (block_group->flags & BTRFS_BLOCK_GROUP_DATA) |
| min_alloc_bytes = fs_info->sectorsize; |
| else |
| min_alloc_bytes = fs_info->nodesize; |
| |
| /* Bail out if we can allocate more data from this block group. */ |
| if (logical + length + min_alloc_bytes <= |
| block_group->start + block_group->zone_capacity) |
| goto out; |
| |
| do_zone_finish(block_group, true); |
| |
| out: |
| btrfs_put_block_group(block_group); |
| } |
| |
| static void btrfs_zone_finish_endio_workfn(struct work_struct *work) |
| { |
| struct btrfs_block_group *bg = |
| container_of(work, struct btrfs_block_group, zone_finish_work); |
| |
| wait_on_extent_buffer_writeback(bg->last_eb); |
| free_extent_buffer(bg->last_eb); |
| btrfs_zone_finish_endio(bg->fs_info, bg->start, bg->length); |
| btrfs_put_block_group(bg); |
| } |
| |
| void btrfs_schedule_zone_finish_bg(struct btrfs_block_group *bg, |
| struct extent_buffer *eb) |
| { |
| if (!bg->seq_zone || eb->start + eb->len * 2 <= bg->start + bg->zone_capacity) |
| return; |
| |
| if (WARN_ON(bg->zone_finish_work.func == btrfs_zone_finish_endio_workfn)) { |
| btrfs_err(bg->fs_info, "double scheduling of bg %llu zone finishing", |
| bg->start); |
| return; |
| } |
| |
| /* For the work */ |
| btrfs_get_block_group(bg); |
| atomic_inc(&eb->refs); |
| bg->last_eb = eb; |
| INIT_WORK(&bg->zone_finish_work, btrfs_zone_finish_endio_workfn); |
| queue_work(system_unbound_wq, &bg->zone_finish_work); |
| } |
| |
| void btrfs_clear_data_reloc_bg(struct btrfs_block_group *bg) |
| { |
| struct btrfs_fs_info *fs_info = bg->fs_info; |
| |
| spin_lock(&fs_info->relocation_bg_lock); |
| if (fs_info->data_reloc_bg == bg->start) |
| fs_info->data_reloc_bg = 0; |
| spin_unlock(&fs_info->relocation_bg_lock); |
| } |
| |
| void btrfs_free_zone_cache(struct btrfs_fs_info *fs_info) |
| { |
| struct btrfs_fs_devices *fs_devices = fs_info->fs_devices; |
| struct btrfs_device *device; |
| |
| if (!btrfs_is_zoned(fs_info)) |
| return; |
| |
| mutex_lock(&fs_devices->device_list_mutex); |
| list_for_each_entry(device, &fs_devices->devices, dev_list) { |
| if (device->zone_info) { |
| vfree(device->zone_info->zone_cache); |
| device->zone_info->zone_cache = NULL; |
| } |
| } |
| mutex_unlock(&fs_devices->device_list_mutex); |
| } |
| |
| bool btrfs_zoned_should_reclaim(struct btrfs_fs_info *fs_info) |
| { |
| struct btrfs_fs_devices *fs_devices = fs_info->fs_devices; |
| struct btrfs_device *device; |
| u64 used = 0; |
| u64 total = 0; |
| u64 factor; |
| |
| ASSERT(btrfs_is_zoned(fs_info)); |
| |
| if (fs_info->bg_reclaim_threshold == 0) |
| return false; |
| |
| mutex_lock(&fs_devices->device_list_mutex); |
| list_for_each_entry(device, &fs_devices->devices, dev_list) { |
| if (!device->bdev) |
| continue; |
| |
| total += device->disk_total_bytes; |
| used += device->bytes_used; |
| } |
| mutex_unlock(&fs_devices->device_list_mutex); |
| |
| factor = div64_u64(used * 100, total); |
| return factor >= fs_info->bg_reclaim_threshold; |
| } |