arch/x86/kernel/cpu/hygon.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Hygon Processor Support for Linux
  *
  * Copyright (C) 2018 Chengdu Haiguang IC Design Co., Ltd.
  *
  * Author: Pu Wen <puwen@hygon.cn>
  */
 #include <linux/io.h>

 #include <asm/cpu.h>
 #include <asm/smp.h>
 #include <asm/cacheinfo.h>
 #include <asm/spec-ctrl.h>
 #include <asm/delay.h>
 #ifdef CONFIG_X86_64
 # include <asm/set_memory.h>
 #endif

 #include "cpu.h"

 #define APICID_SOCKET_ID_BIT 6

 /*
  * nodes_per_socket: Stores the number of nodes per socket.
  * Refer to CPUID Fn8000_001E_ECX Node Identifiers[10:8]
  */
 static u32 nodes_per_socket = 1;

 #ifdef CONFIG_NUMA
 /*
  * To workaround broken NUMA config.  Read the comment in
  * srat_detect_node().
  */
 static int nearby_node(int apicid)
 {
 	int i, node;

 	for (i = apicid - 1; i >= 0; i--) {
 		node = __apicid_to_node[i];
 		if (node != NUMA_NO_NODE && node_online(node))
 			return node;
 	}
 	for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
 		node = __apicid_to_node[i];
 		if (node != NUMA_NO_NODE && node_online(node))
 			return node;
 	}
 	return first_node(node_online_map); /* Shouldn't happen */
 }
 #endif

 static void hygon_get_topology_early(struct cpuinfo_x86 *c)
 {
 	if (cpu_has(c, X86_FEATURE_TOPOEXT))
 		smp_num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1;
 }

 /*
  * Fixup core topology information for
  * (1) Hygon multi-node processors
  *     Assumption: Number of cores in each internal node is the same.
  * (2) Hygon processors supporting compute units
  */
 static void hygon_get_topology(struct cpuinfo_x86 *c)
 {
 	u8 node_id;
 	int cpu = smp_processor_id();

 	/* get information required for multi-node processors */
 	if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
 		int err;
 		u32 eax, ebx, ecx, edx;

 		cpuid(0x8000001e, &eax, &ebx, &ecx, &edx);

 		node_id  = ecx & 0xff;

 		c->cpu_core_id = ebx & 0xff;

 		if (smp_num_siblings > 1)
 			c->x86_max_cores /= smp_num_siblings;

 		/*
 		 * In case leaf B is available, use it to derive
 		 * topology information.
 		 */
 		err = detect_extended_topology(c);
 		if (!err)
 			c->x86_coreid_bits = get_count_order(c->x86_max_cores);

 		/* Socket ID is ApicId[6] for these processors. */
 		c->phys_proc_id = c->apicid >> APICID_SOCKET_ID_BIT;

 		cacheinfo_hygon_init_llc_id(c, cpu, node_id);
 	} else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) {
 		u64 value;

 		rdmsrl(MSR_FAM10H_NODE_ID, value);
 		node_id = value & 7;

 		per_cpu(cpu_llc_id, cpu) = node_id;
 	} else
 		return;

 	if (nodes_per_socket > 1)
 		set_cpu_cap(c, X86_FEATURE_AMD_DCM);
 }

 /*
  * On Hygon setup the lower bits of the APIC id distinguish the cores.
  * Assumes number of cores is a power of two.
  */
 static void hygon_detect_cmp(struct cpuinfo_x86 *c)
 {
 	unsigned int bits;
 	int cpu = smp_processor_id();

 	bits = c->x86_coreid_bits;
 	/* Low order bits define the core id (index of core in socket) */
 	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
 	/* Convert the initial APIC ID into the socket ID */
 	c->phys_proc_id = c->initial_apicid >> bits;
 	/* use socket ID also for last level cache */
 	per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
 }

 static void srat_detect_node(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_NUMA
 	int cpu = smp_processor_id();
 	int node;
 	unsigned int apicid = c->apicid;

 	node = numa_cpu_node(cpu);
 	if (node == NUMA_NO_NODE)
 		node = per_cpu(cpu_llc_id, cpu);

 	/*
 	 * On multi-fabric platform (e.g. Numascale NumaChip) a
 	 * platform-specific handler needs to be called to fixup some
 	 * IDs of the CPU.
 	 */
 	if (x86_cpuinit.fixup_cpu_id)
 		x86_cpuinit.fixup_cpu_id(c, node);

 	if (!node_online(node)) {
 		/*
 		 * Two possibilities here:
 		 *
 		 * - The CPU is missing memory and no node was created.  In
 		 *   that case try picking one from a nearby CPU.
 		 *
 		 * - The APIC IDs differ from the HyperTransport node IDs.
 		 *   Assume they are all increased by a constant offset, but
 		 *   in the same order as the HT nodeids.  If that doesn't
 		 *   result in a usable node fall back to the path for the
 		 *   previous case.
 		 *
 		 * This workaround operates directly on the mapping between
 		 * APIC ID and NUMA node, assuming certain relationship
 		 * between APIC ID, HT node ID and NUMA topology.  As going
 		 * through CPU mapping may alter the outcome, directly
 		 * access __apicid_to_node[].
 		 */
 		int ht_nodeid = c->initial_apicid;

 		if (__apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
 			node = __apicid_to_node[ht_nodeid];
 		/* Pick a nearby node */
 		if (!node_online(node))
 			node = nearby_node(apicid);
 	}
 	numa_set_node(cpu, node);
 #endif
 }

 static void early_init_hygon_mc(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_SMP
 	unsigned int bits, ecx;

 	/* Multi core CPU? */
 	if (c->extended_cpuid_level < 0x80000008)
 		return;

 	ecx = cpuid_ecx(0x80000008);

 	c->x86_max_cores = (ecx & 0xff) + 1;

 	/* CPU telling us the core id bits shift? */
 	bits = (ecx >> 12) & 0xF;

 	/* Otherwise recompute */
 	if (bits == 0) {
 		while ((1 << bits) < c->x86_max_cores)
 			bits++;
 	}

 	c->x86_coreid_bits = bits;
 #endif
 }

 static void bsp_init_hygon(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_X86_64
 	unsigned long long tseg;

 	/*
 	 * Split up direct mapping around the TSEG SMM area.
 	 * Don't do it for gbpages because there seems very little
 	 * benefit in doing so.
 	 */
 	if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
 		unsigned long pfn = tseg >> PAGE_SHIFT;

 		pr_debug("tseg: %010llx\n", tseg);
 		if (pfn_range_is_mapped(pfn, pfn + 1))
 			set_memory_4k((unsigned long)__va(tseg), 1);
 	}
 #endif

 	if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
 		u64 val;

 		rdmsrl(MSR_K7_HWCR, val);
 		if (!(val & BIT(24)))
 			pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n");
 	}

 	if (cpu_has(c, X86_FEATURE_MWAITX))
 		use_mwaitx_delay();

 	if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
 		u32 ecx;

 		ecx = cpuid_ecx(0x8000001e);
 		nodes_per_socket = ((ecx >> 8) & 7) + 1;
 	} else if (boot_cpu_has(X86_FEATURE_NODEID_MSR)) {
 		u64 value;

 		rdmsrl(MSR_FAM10H_NODE_ID, value);
 		nodes_per_socket = ((value >> 3) & 7) + 1;
 	}

 	if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) &&
 	    !boot_cpu_has(X86_FEATURE_VIRT_SSBD)) {
 		/*
 		 * Try to cache the base value so further operations can
 		 * avoid RMW. If that faults, do not enable SSBD.
 		 */
 		if (!rdmsrl_safe(MSR_AMD64_LS_CFG, &x86_amd_ls_cfg_base)) {
 			setup_force_cpu_cap(X86_FEATURE_LS_CFG_SSBD);
 			setup_force_cpu_cap(X86_FEATURE_SSBD);
 			x86_amd_ls_cfg_ssbd_mask = 1ULL << 10;
 		}
 	}
 }

 static void early_init_hygon(struct cpuinfo_x86 *c)
 {
 	u32 dummy;

 	early_init_hygon_mc(c);

 	set_cpu_cap(c, X86_FEATURE_K8);

 	rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);

 	/*
 	 * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
 	 * with P/T states and does not stop in deep C-states
 	 */
 	if (c->x86_power & (1 << 8)) {
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 		set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
 	}

 	/* Bit 12 of 8000_0007 edx is accumulated power mechanism. */
 	if (c->x86_power & BIT(12))
 		set_cpu_cap(c, X86_FEATURE_ACC_POWER);

 #ifdef CONFIG_X86_64
 	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
 #endif

 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
 	/*
 	 * ApicID can always be treated as an 8-bit value for Hygon APIC So, we
 	 * can safely set X86_FEATURE_EXTD_APICID unconditionally.
 	 */
 	if (boot_cpu_has(X86_FEATURE_APIC))
 		set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
 #endif

 	/*
 	 * This is only needed to tell the kernel whether to use VMCALL
 	 * and VMMCALL.  VMMCALL is never executed except under virt, so
 	 * we can set it unconditionally.
 	 */
 	set_cpu_cap(c, X86_FEATURE_VMMCALL);

 	hygon_get_topology_early(c);
 }

 static void init_hygon(struct cpuinfo_x86 *c)
 {
 	early_init_hygon(c);

 	/*
 	 * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
 	 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
 	 */
 	clear_cpu_cap(c, 0*32+31);

 	set_cpu_cap(c, X86_FEATURE_REP_GOOD);

 	/* get apicid instead of initial apic id from cpuid */
 	c->apicid = hard_smp_processor_id();

 	set_cpu_cap(c, X86_FEATURE_ZEN);
 	set_cpu_cap(c, X86_FEATURE_CPB);

 	cpu_detect_cache_sizes(c);

 	hygon_detect_cmp(c);
 	hygon_get_topology(c);
 	srat_detect_node(c);

 	init_hygon_cacheinfo(c);

 	if (cpu_has(c, X86_FEATURE_XMM2)) {
 		/*
 		 * Use LFENCE for execution serialization.  On families which
 		 * don't have that MSR, LFENCE is already serializing.
 		 * msr_set_bit() uses the safe accessors, too, even if the MSR
 		 * is not present.
 		 */
 		msr_set_bit(MSR_F10H_DECFG,
 			    MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT);

 		/* A serializing LFENCE stops RDTSC speculation */
 		set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
 	}

 	/*
 	 * Hygon processors have APIC timer running in deep C states.
 	 */
 	set_cpu_cap(c, X86_FEATURE_ARAT);

 	/* Hygon CPUs don't reset SS attributes on SYSRET, Xen does. */
 	if (!cpu_has(c, X86_FEATURE_XENPV))
 		set_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
 }

 static void cpu_detect_tlb_hygon(struct cpuinfo_x86 *c)
 {
 	u32 ebx, eax, ecx, edx;
 	u16 mask = 0xfff;

 	if (c->extended_cpuid_level < 0x80000006)
 		return;

 	cpuid(0x80000006, &eax, &ebx, &ecx, &edx);

 	tlb_lld_4k[ENTRIES] = (ebx >> 16) & mask;
 	tlb_lli_4k[ENTRIES] = ebx & mask;

 	/* Handle DTLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
 	if (!((eax >> 16) & mask))
 		tlb_lld_2m[ENTRIES] = (cpuid_eax(0x80000005) >> 16) & 0xff;
 	else
 		tlb_lld_2m[ENTRIES] = (eax >> 16) & mask;

 	/* a 4M entry uses two 2M entries */
 	tlb_lld_4m[ENTRIES] = tlb_lld_2m[ENTRIES] >> 1;

 	/* Handle ITLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
 	if (!(eax & mask)) {
 		cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
 		tlb_lli_2m[ENTRIES] = eax & 0xff;
 	} else
 		tlb_lli_2m[ENTRIES] = eax & mask;

 	tlb_lli_4m[ENTRIES] = tlb_lli_2m[ENTRIES] >> 1;
 }

 static const struct cpu_dev hygon_cpu_dev = {
 	.c_vendor	= "Hygon",
 	.c_ident	= { "HygonGenuine" },
 	.c_early_init   = early_init_hygon,
 	.c_detect_tlb	= cpu_detect_tlb_hygon,
 	.c_bsp_init	= bsp_init_hygon,
 	.c_init		= init_hygon,
 	.c_x86_vendor	= X86_VENDOR_HYGON,
 };

 cpu_dev_register(hygon_cpu_dev);
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Hygon Processor Support for Linux
	*
	* Copyright (C) 2018 Chengdu Haiguang IC Design Co., Ltd.
	*
	* Author: Pu Wen <puwen@hygon.cn>
	*/
	#include <linux/io.h>

	#include <asm/cpu.h>
	#include <asm/smp.h>
	#include <asm/cacheinfo.h>
	#include <asm/spec-ctrl.h>
	#include <asm/delay.h>
	#ifdef CONFIG_X86_64
	# include <asm/set_memory.h>
	#endif

	#include "cpu.h"

	#define APICID_SOCKET_ID_BIT 6

	/*
	* nodes_per_socket: Stores the number of nodes per socket.
	* Refer to CPUID Fn8000_001E_ECX Node Identifiers[10:8]
	*/
	static u32 nodes_per_socket = 1;

	#ifdef CONFIG_NUMA
	/*
	* To workaround broken NUMA config. Read the comment in
	* srat_detect_node().
	*/
	static int nearby_node(int apicid)
	{
	int i, node;

	for (i = apicid - 1; i >= 0; i--) {
	node = __apicid_to_node[i];
	if (node != NUMA_NO_NODE && node_online(node))
	return node;
	}
	for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
	node = __apicid_to_node[i];
	if (node != NUMA_NO_NODE && node_online(node))
	return node;
	}
	return first_node(node_online_map); /* Shouldn't happen */
	}
	#endif

	static void hygon_get_topology_early(struct cpuinfo_x86 *c)
	{
	if (cpu_has(c, X86_FEATURE_TOPOEXT))
	smp_num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1;
	}

	/*
	* Fixup core topology information for
	* (1) Hygon multi-node processors
	* Assumption: Number of cores in each internal node is the same.
	* (2) Hygon processors supporting compute units
	*/
	static void hygon_get_topology(struct cpuinfo_x86 *c)
	{
	u8 node_id;
	int cpu = smp_processor_id();

	/* get information required for multi-node processors */
	if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
	int err;
	u32 eax, ebx, ecx, edx;

	cpuid(0x8000001e, &eax, &ebx, &ecx, &edx);

	node_id = ecx & 0xff;

	c->cpu_core_id = ebx & 0xff;

	if (smp_num_siblings > 1)
	c->x86_max_cores /= smp_num_siblings;

	/*
	* In case leaf B is available, use it to derive
	* topology information.
	*/
	err = detect_extended_topology(c);
	if (!err)
	c->x86_coreid_bits = get_count_order(c->x86_max_cores);

	/* Socket ID is ApicId[6] for these processors. */
	c->phys_proc_id = c->apicid >> APICID_SOCKET_ID_BIT;

	cacheinfo_hygon_init_llc_id(c, cpu, node_id);
	} else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) {
	u64 value;

	rdmsrl(MSR_FAM10H_NODE_ID, value);
	node_id = value & 7;

	per_cpu(cpu_llc_id, cpu) = node_id;
	} else
	return;

	if (nodes_per_socket > 1)
	set_cpu_cap(c, X86_FEATURE_AMD_DCM);
	}

	/*
	* On Hygon setup the lower bits of the APIC id distinguish the cores.
	* Assumes number of cores is a power of two.
	*/
	static void hygon_detect_cmp(struct cpuinfo_x86 *c)
	{
	unsigned int bits;
	int cpu = smp_processor_id();

	bits = c->x86_coreid_bits;
	/* Low order bits define the core id (index of core in socket) */
	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
	/* Convert the initial APIC ID into the socket ID */
	c->phys_proc_id = c->initial_apicid >> bits;
	/* use socket ID also for last level cache */
	per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
	}

	static void srat_detect_node(struct cpuinfo_x86 *c)
	{
	#ifdef CONFIG_NUMA
	int cpu = smp_processor_id();
	int node;
	unsigned int apicid = c->apicid;

	node = numa_cpu_node(cpu);
	if (node == NUMA_NO_NODE)
	node = per_cpu(cpu_llc_id, cpu);

	/*
	* On multi-fabric platform (e.g. Numascale NumaChip) a
	* platform-specific handler needs to be called to fixup some
	* IDs of the CPU.
	*/
	if (x86_cpuinit.fixup_cpu_id)
	x86_cpuinit.fixup_cpu_id(c, node);

	if (!node_online(node)) {
	/*
	* Two possibilities here:
	*
	* - The CPU is missing memory and no node was created. In
	* that case try picking one from a nearby CPU.
	*
	* - The APIC IDs differ from the HyperTransport node IDs.
	* Assume they are all increased by a constant offset, but
	* in the same order as the HT nodeids. If that doesn't
	* result in a usable node fall back to the path for the
	* previous case.
	*
	* This workaround operates directly on the mapping between
	* APIC ID and NUMA node, assuming certain relationship
	* between APIC ID, HT node ID and NUMA topology. As going
	* through CPU mapping may alter the outcome, directly
	* access __apicid_to_node[].
	*/
	int ht_nodeid = c->initial_apicid;

	if (__apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
	node = __apicid_to_node[ht_nodeid];
	/* Pick a nearby node */
	if (!node_online(node))
	node = nearby_node(apicid);
	}
	numa_set_node(cpu, node);
	#endif
	}

	static void early_init_hygon_mc(struct cpuinfo_x86 *c)
	{
	#ifdef CONFIG_SMP
	unsigned int bits, ecx;

	/* Multi core CPU? */
	if (c->extended_cpuid_level < 0x80000008)
	return;

	ecx = cpuid_ecx(0x80000008);

	c->x86_max_cores = (ecx & 0xff) + 1;

	/* CPU telling us the core id bits shift? */
	bits = (ecx >> 12) & 0xF;

	/* Otherwise recompute */
	if (bits == 0) {
	while ((1 << bits) < c->x86_max_cores)
	bits++;
	}

	c->x86_coreid_bits = bits;
	#endif
	}

	static void bsp_init_hygon(struct cpuinfo_x86 *c)
	{
	#ifdef CONFIG_X86_64
	unsigned long long tseg;

	/*
	* Split up direct mapping around the TSEG SMM area.
	* Don't do it for gbpages because there seems very little
	* benefit in doing so.
	*/
	if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
	unsigned long pfn = tseg >> PAGE_SHIFT;

	pr_debug("tseg: %010llx\n", tseg);
	if (pfn_range_is_mapped(pfn, pfn + 1))
	set_memory_4k((unsigned long)__va(tseg), 1);
	}
	#endif

	if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
	u64 val;

	rdmsrl(MSR_K7_HWCR, val);
	if (!(val & BIT(24)))
	pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n");
	}

	if (cpu_has(c, X86_FEATURE_MWAITX))
	use_mwaitx_delay();

	if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
	u32 ecx;

	ecx = cpuid_ecx(0x8000001e);
	nodes_per_socket = ((ecx >> 8) & 7) + 1;
	} else if (boot_cpu_has(X86_FEATURE_NODEID_MSR)) {
	u64 value;

	rdmsrl(MSR_FAM10H_NODE_ID, value);
	nodes_per_socket = ((value >> 3) & 7) + 1;
	}

	if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) &&
	!boot_cpu_has(X86_FEATURE_VIRT_SSBD)) {
	/*
	* Try to cache the base value so further operations can
	* avoid RMW. If that faults, do not enable SSBD.
	*/
	if (!rdmsrl_safe(MSR_AMD64_LS_CFG, &x86_amd_ls_cfg_base)) {
	setup_force_cpu_cap(X86_FEATURE_LS_CFG_SSBD);
	setup_force_cpu_cap(X86_FEATURE_SSBD);
	x86_amd_ls_cfg_ssbd_mask = 1ULL << 10;
	}
	}
	}

	static void early_init_hygon(struct cpuinfo_x86 *c)
	{
	u32 dummy;

	early_init_hygon_mc(c);

	set_cpu_cap(c, X86_FEATURE_K8);

	rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);

	/*
	* c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
	* with P/T states and does not stop in deep C-states
	*/
	if (c->x86_power & (1 << 8)) {
	set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
	set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
	}

	/* Bit 12 of 8000_0007 edx is accumulated power mechanism. */
	if (c->x86_power & BIT(12))
	set_cpu_cap(c, X86_FEATURE_ACC_POWER);

	#ifdef CONFIG_X86_64
	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
	#endif

	#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
	/*
	* ApicID can always be treated as an 8-bit value for Hygon APIC So, we
	* can safely set X86_FEATURE_EXTD_APICID unconditionally.
	*/
	if (boot_cpu_has(X86_FEATURE_APIC))
	set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
	#endif

	/*
	* This is only needed to tell the kernel whether to use VMCALL
	* and VMMCALL. VMMCALL is never executed except under virt, so
	* we can set it unconditionally.
	*/
	set_cpu_cap(c, X86_FEATURE_VMMCALL);

	hygon_get_topology_early(c);
	}

	static void init_hygon(struct cpuinfo_x86 *c)
	{
	early_init_hygon(c);

	/*
	* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
	* 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
	*/
	clear_cpu_cap(c, 0*32+31);

	set_cpu_cap(c, X86_FEATURE_REP_GOOD);

	/* get apicid instead of initial apic id from cpuid */
	c->apicid = hard_smp_processor_id();

	set_cpu_cap(c, X86_FEATURE_ZEN);
	set_cpu_cap(c, X86_FEATURE_CPB);

	cpu_detect_cache_sizes(c);

	hygon_detect_cmp(c);
	hygon_get_topology(c);
	srat_detect_node(c);

	init_hygon_cacheinfo(c);

	if (cpu_has(c, X86_FEATURE_XMM2)) {
	/*
	* Use LFENCE for execution serialization. On families which
	* don't have that MSR, LFENCE is already serializing.
	* msr_set_bit() uses the safe accessors, too, even if the MSR
	* is not present.
	*/
	msr_set_bit(MSR_F10H_DECFG,
	MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT);

	/* A serializing LFENCE stops RDTSC speculation */
	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
	}

	/*
	* Hygon processors have APIC timer running in deep C states.
	*/
	set_cpu_cap(c, X86_FEATURE_ARAT);

	/* Hygon CPUs don't reset SS attributes on SYSRET, Xen does. */
	if (!cpu_has(c, X86_FEATURE_XENPV))
	set_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
	}

	static void cpu_detect_tlb_hygon(struct cpuinfo_x86 *c)
	{
	u32 ebx, eax, ecx, edx;
	u16 mask = 0xfff;

	if (c->extended_cpuid_level < 0x80000006)
	return;

	cpuid(0x80000006, &eax, &ebx, &ecx, &edx);

	tlb_lld_4k[ENTRIES] = (ebx >> 16) & mask;
	tlb_lli_4k[ENTRIES] = ebx & mask;

	/* Handle DTLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
	if (!((eax >> 16) & mask))
	tlb_lld_2m[ENTRIES] = (cpuid_eax(0x80000005) >> 16) & 0xff;
	else
	tlb_lld_2m[ENTRIES] = (eax >> 16) & mask;

	/* a 4M entry uses two 2M entries */
	tlb_lld_4m[ENTRIES] = tlb_lld_2m[ENTRIES] >> 1;

	/* Handle ITLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
	if (!(eax & mask)) {
	cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
	tlb_lli_2m[ENTRIES] = eax & 0xff;
	} else
	tlb_lli_2m[ENTRIES] = eax & mask;

	tlb_lli_4m[ENTRIES] = tlb_lli_2m[ENTRIES] >> 1;
	}

	static const struct cpu_dev hygon_cpu_dev = {
	.c_vendor = "Hygon",
	.c_ident = { "HygonGenuine" },
	.c_early_init = early_init_hygon,
	.c_detect_tlb = cpu_detect_tlb_hygon,
	.c_bsp_init = bsp_init_hygon,
	.c_init = init_hygon,
	.c_x86_vendor = X86_VENDOR_HYGON,
	};

	cpu_dev_register(hygon_cpu_dev);