| // SPDX-License-Identifier: GPL-2.0-or-later |
| // |
| // Copyright (C) 2019 ROHM Semiconductors |
| // |
| // ROHM BD70528 PMIC driver |
| |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/irq.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/rohm-bd70528.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/regmap.h> |
| #include <linux/types.h> |
| |
| #define BD70528_NUM_OF_GPIOS 4 |
| |
| static const struct resource rtc_irqs[] = { |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_RTC_ALARM, "bd70528-rtc-alm"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_ELPS_TIM, "bd70528-elapsed-timer"), |
| }; |
| |
| static const struct resource charger_irqs[] = { |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_BAT_OV_RES, "bd70528-bat-ov-res"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_BAT_OV_DET, "bd70528-bat-ov-det"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_DBAT_DET, "bd70528-bat-dead"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_BATTSD_COLD_RES, "bd70528-bat-warmed"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_BATTSD_COLD_DET, "bd70528-bat-cold"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_BATTSD_HOT_RES, "bd70528-bat-cooled"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_BATTSD_HOT_DET, "bd70528-bat-hot"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_CHG_TSD, "bd70528-chg-tshd"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_BAT_RMV, "bd70528-bat-removed"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_BAT_DET, "bd70528-bat-detected"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN2_OV_RES, "bd70528-dcin2-ov-res"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN2_OV_DET, "bd70528-dcin2-ov-det"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN2_RMV, "bd70528-dcin2-removed"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN2_DET, "bd70528-dcin2-detected"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN1_RMV, "bd70528-dcin1-removed"), |
| DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN1_DET, "bd70528-dcin1-detected"), |
| }; |
| |
| static struct mfd_cell bd70528_mfd_cells[] = { |
| { .name = "bd70528-pmic", }, |
| { .name = "bd70528-gpio", }, |
| /* |
| * We use BD71837 driver to drive the clock block. Only differences to |
| * BD70528 clock gate are the register address and mask. |
| */ |
| { .name = "bd718xx-clk", }, |
| { .name = "bd70528-wdt", }, |
| { |
| .name = "bd70528-power", |
| .resources = charger_irqs, |
| .num_resources = ARRAY_SIZE(charger_irqs), |
| }, { |
| .name = "bd70528-rtc", |
| .resources = rtc_irqs, |
| .num_resources = ARRAY_SIZE(rtc_irqs), |
| }, |
| }; |
| |
| static const struct regmap_range volatile_ranges[] = { |
| { |
| .range_min = BD70528_REG_INT_MAIN, |
| .range_max = BD70528_REG_INT_OP_FAIL, |
| }, { |
| .range_min = BD70528_REG_RTC_COUNT_H, |
| .range_max = BD70528_REG_RTC_ALM_REPEAT, |
| }, { |
| /* |
| * WDT control reg is special. Magic values must be written to |
| * it in order to change the control. Should not be cached. |
| */ |
| .range_min = BD70528_REG_WDT_CTRL, |
| .range_max = BD70528_REG_WDT_CTRL, |
| }, { |
| /* |
| * BD70528 also contains a few other registers which require |
| * magic sequences to be written in order to update the value. |
| * At least SHIPMODE, HWRESET, WARMRESET,and STANDBY |
| */ |
| .range_min = BD70528_REG_SHIPMODE, |
| .range_max = BD70528_REG_STANDBY, |
| }, |
| }; |
| |
| static const struct regmap_access_table volatile_regs = { |
| .yes_ranges = &volatile_ranges[0], |
| .n_yes_ranges = ARRAY_SIZE(volatile_ranges), |
| }; |
| |
| static struct regmap_config bd70528_regmap = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .volatile_table = &volatile_regs, |
| .max_register = BD70528_MAX_REGISTER, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| /* |
| * Mapping of main IRQ register bits to sub-IRQ register offsets so that we can |
| * access corect sub-IRQ registers based on bits that are set in main IRQ |
| * register. |
| */ |
| |
| /* bit [0] - Shutdown register */ |
| unsigned int bit0_offsets[] = {0}; /* Shutdown register */ |
| unsigned int bit1_offsets[] = {1}; /* Power failure register */ |
| unsigned int bit2_offsets[] = {2}; /* VR FAULT register */ |
| unsigned int bit3_offsets[] = {3}; /* PMU register interrupts */ |
| unsigned int bit4_offsets[] = {4, 5}; /* Charger 1 and Charger 2 registers */ |
| unsigned int bit5_offsets[] = {6}; /* RTC register */ |
| unsigned int bit6_offsets[] = {7}; /* GPIO register */ |
| unsigned int bit7_offsets[] = {8}; /* Invalid operation register */ |
| |
| static struct regmap_irq_sub_irq_map bd70528_sub_irq_offsets[] = { |
| REGMAP_IRQ_MAIN_REG_OFFSET(bit0_offsets), |
| REGMAP_IRQ_MAIN_REG_OFFSET(bit1_offsets), |
| REGMAP_IRQ_MAIN_REG_OFFSET(bit2_offsets), |
| REGMAP_IRQ_MAIN_REG_OFFSET(bit3_offsets), |
| REGMAP_IRQ_MAIN_REG_OFFSET(bit4_offsets), |
| REGMAP_IRQ_MAIN_REG_OFFSET(bit5_offsets), |
| REGMAP_IRQ_MAIN_REG_OFFSET(bit6_offsets), |
| REGMAP_IRQ_MAIN_REG_OFFSET(bit7_offsets), |
| }; |
| |
| static struct regmap_irq bd70528_irqs[] = { |
| REGMAP_IRQ_REG(BD70528_INT_LONGPUSH, 0, BD70528_INT_LONGPUSH_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_WDT, 0, BD70528_INT_WDT_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_HWRESET, 0, BD70528_INT_HWRESET_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_RSTB_FAULT, 0, BD70528_INT_RSTB_FAULT_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_VBAT_UVLO, 0, BD70528_INT_VBAT_UVLO_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_TSD, 0, BD70528_INT_TSD_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_RSTIN, 0, BD70528_INT_RSTIN_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BUCK1_FAULT, 1, |
| BD70528_INT_BUCK1_FAULT_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BUCK2_FAULT, 1, |
| BD70528_INT_BUCK2_FAULT_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BUCK3_FAULT, 1, |
| BD70528_INT_BUCK3_FAULT_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_LDO1_FAULT, 1, BD70528_INT_LDO1_FAULT_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_LDO2_FAULT, 1, BD70528_INT_LDO2_FAULT_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_LDO3_FAULT, 1, BD70528_INT_LDO3_FAULT_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_LED1_FAULT, 1, BD70528_INT_LED1_FAULT_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_LED2_FAULT, 1, BD70528_INT_LED2_FAULT_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BUCK1_OCP, 2, BD70528_INT_BUCK1_OCP_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BUCK2_OCP, 2, BD70528_INT_BUCK2_OCP_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BUCK3_OCP, 2, BD70528_INT_BUCK3_OCP_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_LED1_OCP, 2, BD70528_INT_LED1_OCP_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_LED2_OCP, 2, BD70528_INT_LED2_OCP_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BUCK1_FULLON, 2, |
| BD70528_INT_BUCK1_FULLON_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BUCK2_FULLON, 2, |
| BD70528_INT_BUCK2_FULLON_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_SHORTPUSH, 3, BD70528_INT_SHORTPUSH_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_AUTO_WAKEUP, 3, |
| BD70528_INT_AUTO_WAKEUP_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_STATE_CHANGE, 3, |
| BD70528_INT_STATE_CHANGE_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BAT_OV_RES, 4, BD70528_INT_BAT_OV_RES_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BAT_OV_DET, 4, BD70528_INT_BAT_OV_DET_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_DBAT_DET, 4, BD70528_INT_DBAT_DET_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BATTSD_COLD_RES, 4, |
| BD70528_INT_BATTSD_COLD_RES_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BATTSD_COLD_DET, 4, |
| BD70528_INT_BATTSD_COLD_DET_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BATTSD_HOT_RES, 4, |
| BD70528_INT_BATTSD_HOT_RES_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BATTSD_HOT_DET, 4, |
| BD70528_INT_BATTSD_HOT_DET_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_CHG_TSD, 4, BD70528_INT_CHG_TSD_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BAT_RMV, 5, BD70528_INT_BAT_RMV_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BAT_DET, 5, BD70528_INT_BAT_DET_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_DCIN2_OV_RES, 5, |
| BD70528_INT_DCIN2_OV_RES_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_DCIN2_OV_DET, 5, |
| BD70528_INT_DCIN2_OV_DET_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_DCIN2_RMV, 5, BD70528_INT_DCIN2_RMV_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_DCIN2_DET, 5, BD70528_INT_DCIN2_DET_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_DCIN1_RMV, 5, BD70528_INT_DCIN1_RMV_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_DCIN1_DET, 5, BD70528_INT_DCIN1_DET_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_RTC_ALARM, 6, BD70528_INT_RTC_ALARM_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_ELPS_TIM, 6, BD70528_INT_ELPS_TIM_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_GPIO0, 7, BD70528_INT_GPIO0_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_GPIO1, 7, BD70528_INT_GPIO1_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_GPIO2, 7, BD70528_INT_GPIO2_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_GPIO3, 7, BD70528_INT_GPIO3_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BUCK1_DVS_OPFAIL, 8, |
| BD70528_INT_BUCK1_DVS_OPFAIL_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BUCK2_DVS_OPFAIL, 8, |
| BD70528_INT_BUCK2_DVS_OPFAIL_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_BUCK3_DVS_OPFAIL, 8, |
| BD70528_INT_BUCK3_DVS_OPFAIL_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_LED1_VOLT_OPFAIL, 8, |
| BD70528_INT_LED1_VOLT_OPFAIL_MASK), |
| REGMAP_IRQ_REG(BD70528_INT_LED2_VOLT_OPFAIL, 8, |
| BD70528_INT_LED2_VOLT_OPFAIL_MASK), |
| }; |
| |
| static struct regmap_irq_chip bd70528_irq_chip = { |
| .name = "bd70528_irq", |
| .main_status = BD70528_REG_INT_MAIN, |
| .irqs = &bd70528_irqs[0], |
| .num_irqs = ARRAY_SIZE(bd70528_irqs), |
| .status_base = BD70528_REG_INT_SHDN, |
| .mask_base = BD70528_REG_INT_SHDN_MASK, |
| .ack_base = BD70528_REG_INT_SHDN, |
| .type_base = BD70528_REG_GPIO1_IN, |
| .init_ack_masked = true, |
| .num_regs = 9, |
| .num_main_regs = 1, |
| .num_type_reg = 4, |
| .sub_reg_offsets = &bd70528_sub_irq_offsets[0], |
| .num_main_status_bits = 8, |
| .irq_reg_stride = 1, |
| }; |
| |
| static int bd70528_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct bd70528_data *bd70528; |
| struct regmap_irq_chip_data *irq_data; |
| int ret, i; |
| |
| if (!i2c->irq) { |
| dev_err(&i2c->dev, "No IRQ configured\n"); |
| return -EINVAL; |
| } |
| |
| bd70528 = devm_kzalloc(&i2c->dev, sizeof(*bd70528), GFP_KERNEL); |
| if (!bd70528) |
| return -ENOMEM; |
| |
| mutex_init(&bd70528->rtc_timer_lock); |
| |
| dev_set_drvdata(&i2c->dev, &bd70528->chip); |
| |
| bd70528->chip.chip_type = ROHM_CHIP_TYPE_BD70528; |
| bd70528->chip.regmap = devm_regmap_init_i2c(i2c, &bd70528_regmap); |
| if (IS_ERR(bd70528->chip.regmap)) { |
| dev_err(&i2c->dev, "Failed to initialize Regmap\n"); |
| return PTR_ERR(bd70528->chip.regmap); |
| } |
| |
| /* |
| * Disallow type setting for all IRQs by default as most of them do not |
| * support setting type. |
| */ |
| for (i = 0; i < ARRAY_SIZE(bd70528_irqs); i++) |
| bd70528_irqs[i].type.types_supported = 0; |
| |
| /* Set IRQ typesetting information for GPIO pins 0 - 3 */ |
| for (i = 0; i < BD70528_NUM_OF_GPIOS; i++) { |
| struct regmap_irq_type *type; |
| |
| type = &bd70528_irqs[BD70528_INT_GPIO0 + i].type; |
| type->type_reg_offset = 2 * i; |
| type->type_rising_val = 0x20; |
| type->type_falling_val = 0x10; |
| type->type_level_high_val = 0x40; |
| type->type_level_low_val = 0x50; |
| type->types_supported = (IRQ_TYPE_EDGE_BOTH | |
| IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW); |
| } |
| |
| ret = devm_regmap_add_irq_chip(&i2c->dev, bd70528->chip.regmap, |
| i2c->irq, IRQF_ONESHOT, 0, |
| &bd70528_irq_chip, &irq_data); |
| if (ret) { |
| dev_err(&i2c->dev, "Failed to add IRQ chip\n"); |
| return ret; |
| } |
| dev_dbg(&i2c->dev, "Registered %d IRQs for chip\n", |
| bd70528_irq_chip.num_irqs); |
| |
| /* |
| * BD70528 IRQ controller is not touching the main mask register. |
| * So enable the GPIO block interrupts at main level. We can just leave |
| * them enabled as the IRQ controller should disable IRQs from |
| * sub-registers when IRQ is disabled or freed. |
| */ |
| ret = regmap_update_bits(bd70528->chip.regmap, |
| BD70528_REG_INT_MAIN_MASK, |
| BD70528_INT_GPIO_MASK, 0); |
| |
| ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, |
| bd70528_mfd_cells, |
| ARRAY_SIZE(bd70528_mfd_cells), NULL, 0, |
| regmap_irq_get_domain(irq_data)); |
| if (ret) |
| dev_err(&i2c->dev, "Failed to create subdevices\n"); |
| |
| return ret; |
| } |
| |
| static const struct of_device_id bd70528_of_match[] = { |
| { .compatible = "rohm,bd70528", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, bd70528_of_match); |
| |
| static struct i2c_driver bd70528_drv = { |
| .driver = { |
| .name = "rohm-bd70528", |
| .of_match_table = bd70528_of_match, |
| }, |
| .probe = &bd70528_i2c_probe, |
| }; |
| |
| module_i2c_driver(bd70528_drv); |
| |
| MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); |
| MODULE_DESCRIPTION("ROHM BD70528 Power Management IC driver"); |
| MODULE_LICENSE("GPL"); |
