| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module |
| * |
| * Copyright (C) 2013 Atmel, |
| * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> |
| */ |
| |
| / { |
| compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; |
| |
| chosen { |
| bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs"; |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory { |
| reg = <0x20000000 0x20000000>; |
| }; |
| |
| clocks { |
| slow_xtal { |
| clock-frequency = <32768>; |
| }; |
| |
| main_xtal { |
| clock-frequency = <12000000>; |
| }; |
| }; |
| |
| ahb { |
| apb { |
| spi0: spi@f0004000 { |
| cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; |
| }; |
| |
| tcb0: timer@f0010000 { |
| timer@0 { |
| compatible = "atmel,tcb-timer"; |
| reg = <0>; |
| }; |
| |
| timer@1 { |
| compatible = "atmel,tcb-timer"; |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| ebi@10000000 { |
| pinctrl-0 = <&pinctrl_ebi_addr &pinctrl_ebi_cs0>; |
| pinctr-name = "default"; |
| status = "okay"; |
| |
| nor: flash@0,0 { |
| compatible = "cfi-flash"; |
| linux,mtd-name = "physmap-flash.0"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x0 0x0 0x1000000>; |
| bank-width = <2>; |
| atmel,smc-read-mode = "nrd"; |
| atmel,smc-write-mode = "nwe"; |
| atmel,smc-bus-width = <16>; |
| atmel,smc-ncs-rd-setup-ns = <0>; |
| atmel,smc-ncs-wr-setup-ns = <0>; |
| atmel,smc-nwe-setup-ns = <8>; |
| atmel,smc-nrd-setup-ns = <16>; |
| atmel,smc-ncs-rd-pulse-ns = <84>; |
| atmel,smc-ncs-wr-pulse-ns = <84>; |
| atmel,smc-nrd-pulse-ns = <76>; |
| atmel,smc-nwe-pulse-ns = <76>; |
| atmel,smc-nrd-cycle-ns = <107>; |
| atmel,smc-nwe-cycle-ns = <84>; |
| atmel,smc-tdf-ns = <16>; |
| }; |
| |
| nand_controller: nand-controller { |
| status = "okay"; |
| |
| nand@3 { |
| reg = <0x3 0x0 0x2>; |
| atmel,rb = <0>; |
| nand-ecc-mode = "hw"; |
| nand-ecc-strength = <4>; |
| nand-ecc-step-size = <512>; |
| nand-on-flash-bbt; |
| label = "atmel_nand"; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| at91bootstrap@0 { |
| label = "at91bootstrap"; |
| reg = <0x0 0x40000>; |
| }; |
| |
| bootloader@40000 { |
| label = "bootloader"; |
| reg = <0x40000 0x80000>; |
| }; |
| |
| bootloaderenv@c0000 { |
| label = "bootloader env"; |
| reg = <0xc0000 0xc0000>; |
| }; |
| |
| dtb@180000 { |
| label = "device tree"; |
| reg = <0x180000 0x80000>; |
| }; |
| |
| kernel@200000 { |
| label = "kernel"; |
| reg = <0x200000 0x600000>; |
| }; |
| |
| rootfs@800000 { |
| label = "rootfs"; |
| reg = <0x800000 0x0f800000>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| d2 { |
| label = "d2"; |
| gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */ |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| }; |