arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Device Tree Include file for Freescale Layerscape-1046A family SoC.
 *
 * Copyright 2016 Freescale Semiconductor, Inc.
 *
 * Mingkai Hu <mingkai.hu@nxp.com>
 */

/dts-v1/;

#include "fsl-ls1046a.dtsi"

/ {
	model = "LS1046A RDB Board";
	compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";

	aliases {
		serial0 = &duart0;
		serial1 = &duart1;
		serial2 = &duart2;
		serial3 = &duart3;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};
};

&duart0 {
	status = "okay";
};

&duart1 {
	status = "okay";
};

&esdhc {
	mmc-hs200-1_8v;
	sd-uhs-sdr104;
	sd-uhs-sdr50;
	sd-uhs-sdr25;
	sd-uhs-sdr12;
};

&i2c0 {
	status = "okay";

	ina220@40 {
		compatible = "ti,ina220";
		reg = <0x40>;
		shunt-resistor = <1000>;
	};

	temp-sensor@4c {
		compatible = "adi,adt7461";
		reg = <0x4c>;
	};

	eeprom@52 {
		compatible = "atmel,24c512";
		reg = <0x52>;
	};

	eeprom@53 {
		compatible = "atmel,24c512";
		reg = <0x53>;
	};
};

&i2c3 {
	status = "okay";

	rtc@51 {
		compatible = "nxp,pcf2129";
		reg = <0x51>;
	};
};

&ifc {
	#address-cells = <2>;
	#size-cells = <1>;
	/* NAND Flashe and CPLD on board */
	ranges = <0x0 0x0 0x0 0x7e800000 0x00010000
		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
	status = "okay";

	nand@0,0 {
		compatible = "fsl,ifc-nand";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x0 0x0 0x10000>;
	};

	cpld: board-control@2,0 {
		compatible = "fsl,ls1046ardb-cpld";
		reg = <0x2 0x0 0x0000100>;
	};
};

&qspi {
	status = "okay";

	qflash0: flash@0 {
		compatible = "spansion,m25p80";
		#address-cells = <1>;
		#size-cells = <1>;
		spi-max-frequency = <20000000>;
		spi-rx-bus-width = <4>;
		spi-tx-bus-width = <4>;
		reg = <0>;
	};

	qflash1: flash@1 {
		compatible = "spansion,m25p80";
		#address-cells = <1>;
		#size-cells = <1>;
		spi-max-frequency = <20000000>;
		spi-rx-bus-width = <4>;
		spi-tx-bus-width = <4>;
		reg = <1>;
	};
};

&usb1 {
	dr_mode = "otg";
};

#include "fsl-ls1046-post.dtsi"

&fman0 {
	ethernet@e4000 {
		phy-handle = <&rgmii_phy1>;
		phy-connection-type = "rgmii";
	};

	ethernet@e6000 {
		phy-handle = <&rgmii_phy2>;
		phy-connection-type = "rgmii";
	};

	ethernet@e8000 {
		phy-handle = <&sgmii_phy1>;
		phy-connection-type = "sgmii";
	};

	ethernet@ea000 {
		phy-handle = <&sgmii_phy2>;
		phy-connection-type = "sgmii";
	};

	ethernet@f0000 { /* 10GEC1 */
		phy-handle = <&aqr106_phy>;
		phy-connection-type = "xgmii";
	};

	ethernet@f2000 { /* 10GEC2 */
		fixed-link = <0 1 1000 0 0>;
		phy-connection-type = "xgmii";
	};

	mdio@fc000 {
		rgmii_phy1: ethernet-phy@1 {
			reg = <0x1>;
		};

		rgmii_phy2: ethernet-phy@2 {
			reg = <0x2>;
		};

		sgmii_phy1: ethernet-phy@3 {
			reg = <0x3>;
		};

		sgmii_phy2: ethernet-phy@4 {
			reg = <0x4>;
		};
	};

	mdio@fd000 {
		aqr106_phy: ethernet-phy@0 {
			compatible = "ethernet-phy-ieee802.3-c45";
			interrupts = <0 131 4>;
			reg = <0x0>;
		};
	};
};