| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * S390 version |
| * Copyright IBM Corp. 1999, 2012 |
| * Author(s): Hartmut Penner (hp@de.ibm.com), |
| * Martin Schwidefsky (schwidefsky@de.ibm.com) |
| * |
| * Derived from "arch/i386/kernel/setup.c" |
| * Copyright (C) 1995, Linus Torvalds |
| */ |
| |
| /* |
| * This file handles the architecture-dependent parts of initialization |
| */ |
| |
| #define KMSG_COMPONENT "setup" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/errno.h> |
| #include <linux/export.h> |
| #include <linux/sched.h> |
| #include <linux/sched/task.h> |
| #include <linux/cpu.h> |
| #include <linux/kernel.h> |
| #include <linux/memblock.h> |
| #include <linux/mm.h> |
| #include <linux/stddef.h> |
| #include <linux/unistd.h> |
| #include <linux/ptrace.h> |
| #include <linux/random.h> |
| #include <linux/user.h> |
| #include <linux/tty.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/initrd.h> |
| #include <linux/root_dev.h> |
| #include <linux/console.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/dma-contiguous.h> |
| #include <linux/device.h> |
| #include <linux/notifier.h> |
| #include <linux/pfn.h> |
| #include <linux/ctype.h> |
| #include <linux/reboot.h> |
| #include <linux/topology.h> |
| #include <linux/kexec.h> |
| #include <linux/crash_dump.h> |
| #include <linux/memory.h> |
| #include <linux/compat.h> |
| #include <linux/start_kernel.h> |
| |
| #include <asm/boot_data.h> |
| #include <asm/ipl.h> |
| #include <asm/facility.h> |
| #include <asm/smp.h> |
| #include <asm/mmu_context.h> |
| #include <asm/cpcmd.h> |
| #include <asm/lowcore.h> |
| #include <asm/nmi.h> |
| #include <asm/irq.h> |
| #include <asm/page.h> |
| #include <asm/ptrace.h> |
| #include <asm/sections.h> |
| #include <asm/ebcdic.h> |
| #include <asm/diag.h> |
| #include <asm/os_info.h> |
| #include <asm/sclp.h> |
| #include <asm/stacktrace.h> |
| #include <asm/sysinfo.h> |
| #include <asm/numa.h> |
| #include <asm/alternative.h> |
| #include <asm/nospec-branch.h> |
| #include <asm/mem_detect.h> |
| #include <asm/uv.h> |
| #include "entry.h" |
| |
| /* |
| * Machine setup.. |
| */ |
| unsigned int console_mode = 0; |
| EXPORT_SYMBOL(console_mode); |
| |
| unsigned int console_devno = -1; |
| EXPORT_SYMBOL(console_devno); |
| |
| unsigned int console_irq = -1; |
| EXPORT_SYMBOL(console_irq); |
| |
| unsigned long elf_hwcap __read_mostly = 0; |
| char elf_platform[ELF_PLATFORM_SIZE]; |
| |
| unsigned long int_hwcap = 0; |
| |
| #ifdef CONFIG_PROTECTED_VIRTUALIZATION_GUEST |
| int __bootdata_preserved(prot_virt_guest); |
| #endif |
| |
| int __bootdata(noexec_disabled); |
| int __bootdata(memory_end_set); |
| unsigned long __bootdata(memory_end); |
| unsigned long __bootdata(vmalloc_size); |
| unsigned long __bootdata(max_physmem_end); |
| struct mem_detect_info __bootdata(mem_detect); |
| |
| struct exception_table_entry *__bootdata_preserved(__start_dma_ex_table); |
| struct exception_table_entry *__bootdata_preserved(__stop_dma_ex_table); |
| unsigned long __bootdata_preserved(__swsusp_reset_dma); |
| unsigned long __bootdata_preserved(__stext_dma); |
| unsigned long __bootdata_preserved(__etext_dma); |
| unsigned long __bootdata_preserved(__sdma); |
| unsigned long __bootdata_preserved(__edma); |
| unsigned long __bootdata_preserved(__kaslr_offset); |
| |
| unsigned long VMALLOC_START; |
| EXPORT_SYMBOL(VMALLOC_START); |
| |
| unsigned long VMALLOC_END; |
| EXPORT_SYMBOL(VMALLOC_END); |
| |
| struct page *vmemmap; |
| EXPORT_SYMBOL(vmemmap); |
| |
| unsigned long MODULES_VADDR; |
| unsigned long MODULES_END; |
| |
| /* An array with a pointer to the lowcore of every CPU. */ |
| struct lowcore *lowcore_ptr[NR_CPUS]; |
| EXPORT_SYMBOL(lowcore_ptr); |
| |
| /* |
| * This is set up by the setup-routine at boot-time |
| * for S390 need to find out, what we have to setup |
| * using address 0x10400 ... |
| */ |
| |
| #include <asm/setup.h> |
| |
| /* |
| * condev= and conmode= setup parameter. |
| */ |
| |
| static int __init condev_setup(char *str) |
| { |
| int vdev; |
| |
| vdev = simple_strtoul(str, &str, 0); |
| if (vdev >= 0 && vdev < 65536) { |
| console_devno = vdev; |
| console_irq = -1; |
| } |
| return 1; |
| } |
| |
| __setup("condev=", condev_setup); |
| |
| static void __init set_preferred_console(void) |
| { |
| if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP) |
| add_preferred_console("ttyS", 0, NULL); |
| else if (CONSOLE_IS_3270) |
| add_preferred_console("tty3270", 0, NULL); |
| else if (CONSOLE_IS_VT220) |
| add_preferred_console("ttyS", 1, NULL); |
| else if (CONSOLE_IS_HVC) |
| add_preferred_console("hvc", 0, NULL); |
| } |
| |
| static int __init conmode_setup(char *str) |
| { |
| #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) |
| if (!strcmp(str, "hwc") || !strcmp(str, "sclp")) |
| SET_CONSOLE_SCLP; |
| #endif |
| #if defined(CONFIG_TN3215_CONSOLE) |
| if (!strcmp(str, "3215")) |
| SET_CONSOLE_3215; |
| #endif |
| #if defined(CONFIG_TN3270_CONSOLE) |
| if (!strcmp(str, "3270")) |
| SET_CONSOLE_3270; |
| #endif |
| set_preferred_console(); |
| return 1; |
| } |
| |
| __setup("conmode=", conmode_setup); |
| |
| static void __init conmode_default(void) |
| { |
| char query_buffer[1024]; |
| char *ptr; |
| |
| if (MACHINE_IS_VM) { |
| cpcmd("QUERY CONSOLE", query_buffer, 1024, NULL); |
| console_devno = simple_strtoul(query_buffer + 5, NULL, 16); |
| ptr = strstr(query_buffer, "SUBCHANNEL ="); |
| console_irq = simple_strtoul(ptr + 13, NULL, 16); |
| cpcmd("QUERY TERM", query_buffer, 1024, NULL); |
| ptr = strstr(query_buffer, "CONMODE"); |
| /* |
| * Set the conmode to 3215 so that the device recognition |
| * will set the cu_type of the console to 3215. If the |
| * conmode is 3270 and we don't set it back then both |
| * 3215 and the 3270 driver will try to access the console |
| * device (3215 as console and 3270 as normal tty). |
| */ |
| cpcmd("TERM CONMODE 3215", NULL, 0, NULL); |
| if (ptr == NULL) { |
| #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| return; |
| } |
| if (str_has_prefix(ptr + 8, "3270")) { |
| #if defined(CONFIG_TN3270_CONSOLE) |
| SET_CONSOLE_3270; |
| #elif defined(CONFIG_TN3215_CONSOLE) |
| SET_CONSOLE_3215; |
| #elif defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| } else if (str_has_prefix(ptr + 8, "3215")) { |
| #if defined(CONFIG_TN3215_CONSOLE) |
| SET_CONSOLE_3215; |
| #elif defined(CONFIG_TN3270_CONSOLE) |
| SET_CONSOLE_3270; |
| #elif defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| } |
| } else if (MACHINE_IS_KVM) { |
| if (sclp.has_vt220 && IS_ENABLED(CONFIG_SCLP_VT220_CONSOLE)) |
| SET_CONSOLE_VT220; |
| else if (sclp.has_linemode && IS_ENABLED(CONFIG_SCLP_CONSOLE)) |
| SET_CONSOLE_SCLP; |
| else |
| SET_CONSOLE_HVC; |
| } else { |
| #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| } |
| if (IS_ENABLED(CONFIG_VT) && IS_ENABLED(CONFIG_DUMMY_CONSOLE)) |
| conswitchp = &dummy_con; |
| } |
| |
| #ifdef CONFIG_CRASH_DUMP |
| static void __init setup_zfcpdump(void) |
| { |
| if (ipl_info.type != IPL_TYPE_FCP_DUMP) |
| return; |
| if (OLDMEM_BASE) |
| return; |
| strcat(boot_command_line, " cio_ignore=all,!ipldev,!condev"); |
| console_loglevel = 2; |
| } |
| #else |
| static inline void setup_zfcpdump(void) {} |
| #endif /* CONFIG_CRASH_DUMP */ |
| |
| /* |
| * Reboot, halt and power_off stubs. They just call _machine_restart, |
| * _machine_halt or _machine_power_off. |
| */ |
| |
| void machine_restart(char *command) |
| { |
| if ((!in_interrupt() && !in_atomic()) || oops_in_progress) |
| /* |
| * Only unblank the console if we are called in enabled |
| * context or a bust_spinlocks cleared the way for us. |
| */ |
| console_unblank(); |
| _machine_restart(command); |
| } |
| |
| void machine_halt(void) |
| { |
| if (!in_interrupt() || oops_in_progress) |
| /* |
| * Only unblank the console if we are called in enabled |
| * context or a bust_spinlocks cleared the way for us. |
| */ |
| console_unblank(); |
| _machine_halt(); |
| } |
| |
| void machine_power_off(void) |
| { |
| if (!in_interrupt() || oops_in_progress) |
| /* |
| * Only unblank the console if we are called in enabled |
| * context or a bust_spinlocks cleared the way for us. |
| */ |
| console_unblank(); |
| _machine_power_off(); |
| } |
| |
| /* |
| * Dummy power off function. |
| */ |
| void (*pm_power_off)(void) = machine_power_off; |
| EXPORT_SYMBOL_GPL(pm_power_off); |
| |
| void *restart_stack __section(.data); |
| |
| unsigned long stack_alloc(void) |
| { |
| #ifdef CONFIG_VMAP_STACK |
| return (unsigned long) |
| __vmalloc_node_range(THREAD_SIZE, THREAD_SIZE, |
| VMALLOC_START, VMALLOC_END, |
| THREADINFO_GFP, |
| PAGE_KERNEL, 0, NUMA_NO_NODE, |
| __builtin_return_address(0)); |
| #else |
| return __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER); |
| #endif |
| } |
| |
| void stack_free(unsigned long stack) |
| { |
| #ifdef CONFIG_VMAP_STACK |
| vfree((void *) stack); |
| #else |
| free_pages(stack, THREAD_SIZE_ORDER); |
| #endif |
| } |
| |
| int __init arch_early_irq_init(void) |
| { |
| unsigned long stack; |
| |
| stack = __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER); |
| if (!stack) |
| panic("Couldn't allocate async stack"); |
| S390_lowcore.async_stack = stack + STACK_INIT_OFFSET; |
| return 0; |
| } |
| |
| static int __init async_stack_realloc(void) |
| { |
| unsigned long old, new; |
| |
| old = S390_lowcore.async_stack - STACK_INIT_OFFSET; |
| new = stack_alloc(); |
| if (!new) |
| panic("Couldn't allocate async stack"); |
| S390_lowcore.async_stack = new + STACK_INIT_OFFSET; |
| free_pages(old, THREAD_SIZE_ORDER); |
| return 0; |
| } |
| early_initcall(async_stack_realloc); |
| |
| void __init arch_call_rest_init(void) |
| { |
| unsigned long stack; |
| |
| stack = stack_alloc(); |
| if (!stack) |
| panic("Couldn't allocate kernel stack"); |
| current->stack = (void *) stack; |
| #ifdef CONFIG_VMAP_STACK |
| current->stack_vm_area = (void *) stack; |
| #endif |
| set_task_stack_end_magic(current); |
| stack += STACK_INIT_OFFSET; |
| S390_lowcore.kernel_stack = stack; |
| CALL_ON_STACK_NORETURN(rest_init, stack); |
| } |
| |
| static void __init setup_lowcore_dat_off(void) |
| { |
| struct lowcore *lc; |
| |
| /* |
| * Setup lowcore for boot cpu |
| */ |
| BUILD_BUG_ON(sizeof(struct lowcore) != LC_PAGES * PAGE_SIZE); |
| lc = memblock_alloc_low(sizeof(*lc), sizeof(*lc)); |
| if (!lc) |
| panic("%s: Failed to allocate %zu bytes align=%zx\n", |
| __func__, sizeof(*lc), sizeof(*lc)); |
| |
| lc->restart_psw.mask = PSW_KERNEL_BITS; |
| lc->restart_psw.addr = (unsigned long) restart_int_handler; |
| lc->external_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_MCHECK; |
| lc->external_new_psw.addr = (unsigned long) ext_int_handler; |
| lc->svc_new_psw.mask = PSW_KERNEL_BITS | |
| PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK; |
| lc->svc_new_psw.addr = (unsigned long) system_call; |
| lc->program_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_MCHECK; |
| lc->program_new_psw.addr = (unsigned long) pgm_check_handler; |
| lc->mcck_new_psw.mask = PSW_KERNEL_BITS; |
| lc->mcck_new_psw.addr = (unsigned long) mcck_int_handler; |
| lc->io_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_MCHECK; |
| lc->io_new_psw.addr = (unsigned long) io_int_handler; |
| lc->clock_comparator = clock_comparator_max; |
| lc->nodat_stack = ((unsigned long) &init_thread_union) |
| + THREAD_SIZE - STACK_FRAME_OVERHEAD - sizeof(struct pt_regs); |
| lc->current_task = (unsigned long)&init_task; |
| lc->lpp = LPP_MAGIC; |
| lc->machine_flags = S390_lowcore.machine_flags; |
| lc->preempt_count = S390_lowcore.preempt_count; |
| lc->stfl_fac_list = S390_lowcore.stfl_fac_list; |
| memcpy(lc->stfle_fac_list, S390_lowcore.stfle_fac_list, |
| sizeof(lc->stfle_fac_list)); |
| memcpy(lc->alt_stfle_fac_list, S390_lowcore.alt_stfle_fac_list, |
| sizeof(lc->alt_stfle_fac_list)); |
| nmi_alloc_boot_cpu(lc); |
| vdso_alloc_boot_cpu(lc); |
| lc->sync_enter_timer = S390_lowcore.sync_enter_timer; |
| lc->async_enter_timer = S390_lowcore.async_enter_timer; |
| lc->exit_timer = S390_lowcore.exit_timer; |
| lc->user_timer = S390_lowcore.user_timer; |
| lc->system_timer = S390_lowcore.system_timer; |
| lc->steal_timer = S390_lowcore.steal_timer; |
| lc->last_update_timer = S390_lowcore.last_update_timer; |
| lc->last_update_clock = S390_lowcore.last_update_clock; |
| |
| /* |
| * Allocate the global restart stack which is the same for |
| * all CPUs in cast *one* of them does a PSW restart. |
| */ |
| restart_stack = memblock_alloc(THREAD_SIZE, THREAD_SIZE); |
| if (!restart_stack) |
| panic("%s: Failed to allocate %lu bytes align=0x%lx\n", |
| __func__, THREAD_SIZE, THREAD_SIZE); |
| restart_stack += STACK_INIT_OFFSET; |
| |
| /* |
| * Set up PSW restart to call ipl.c:do_restart(). Copy the relevant |
| * restart data to the absolute zero lowcore. This is necessary if |
| * PSW restart is done on an offline CPU that has lowcore zero. |
| */ |
| lc->restart_stack = (unsigned long) restart_stack; |
| lc->restart_fn = (unsigned long) do_restart; |
| lc->restart_data = 0; |
| lc->restart_source = -1UL; |
| |
| /* Setup absolute zero lowcore */ |
| mem_assign_absolute(S390_lowcore.restart_stack, lc->restart_stack); |
| mem_assign_absolute(S390_lowcore.restart_fn, lc->restart_fn); |
| mem_assign_absolute(S390_lowcore.restart_data, lc->restart_data); |
| mem_assign_absolute(S390_lowcore.restart_source, lc->restart_source); |
| mem_assign_absolute(S390_lowcore.restart_psw, lc->restart_psw); |
| |
| lc->spinlock_lockval = arch_spin_lockval(0); |
| lc->spinlock_index = 0; |
| arch_spin_lock_setup(0); |
| lc->br_r1_trampoline = 0x07f1; /* br %r1 */ |
| |
| set_prefix((u32)(unsigned long) lc); |
| lowcore_ptr[0] = lc; |
| } |
| |
| static void __init setup_lowcore_dat_on(void) |
| { |
| __ctl_clear_bit(0, 28); |
| S390_lowcore.external_new_psw.mask |= PSW_MASK_DAT; |
| S390_lowcore.svc_new_psw.mask |= PSW_MASK_DAT; |
| S390_lowcore.program_new_psw.mask |= PSW_MASK_DAT; |
| S390_lowcore.io_new_psw.mask |= PSW_MASK_DAT; |
| __ctl_set_bit(0, 28); |
| } |
| |
| static struct resource code_resource = { |
| .name = "Kernel code", |
| .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM, |
| }; |
| |
| static struct resource data_resource = { |
| .name = "Kernel data", |
| .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM, |
| }; |
| |
| static struct resource bss_resource = { |
| .name = "Kernel bss", |
| .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM, |
| }; |
| |
| static struct resource __initdata *standard_resources[] = { |
| &code_resource, |
| &data_resource, |
| &bss_resource, |
| }; |
| |
| static void __init setup_resources(void) |
| { |
| struct resource *res, *std_res, *sub_res; |
| struct memblock_region *reg; |
| int j; |
| |
| code_resource.start = (unsigned long) _text; |
| code_resource.end = (unsigned long) _etext - 1; |
| data_resource.start = (unsigned long) _etext; |
| data_resource.end = (unsigned long) _edata - 1; |
| bss_resource.start = (unsigned long) __bss_start; |
| bss_resource.end = (unsigned long) __bss_stop - 1; |
| |
| for_each_memblock(memory, reg) { |
| res = memblock_alloc(sizeof(*res), 8); |
| if (!res) |
| panic("%s: Failed to allocate %zu bytes align=0x%x\n", |
| __func__, sizeof(*res), 8); |
| res->flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM; |
| |
| res->name = "System RAM"; |
| res->start = reg->base; |
| res->end = reg->base + reg->size - 1; |
| request_resource(&iomem_resource, res); |
| |
| for (j = 0; j < ARRAY_SIZE(standard_resources); j++) { |
| std_res = standard_resources[j]; |
| if (std_res->start < res->start || |
| std_res->start > res->end) |
| continue; |
| if (std_res->end > res->end) { |
| sub_res = memblock_alloc(sizeof(*sub_res), 8); |
| if (!sub_res) |
| panic("%s: Failed to allocate %zu bytes align=0x%x\n", |
| __func__, sizeof(*sub_res), 8); |
| *sub_res = *std_res; |
| sub_res->end = res->end; |
| std_res->start = res->end + 1; |
| request_resource(res, sub_res); |
| } else { |
| request_resource(res, std_res); |
| } |
| } |
| } |
| #ifdef CONFIG_CRASH_DUMP |
| /* |
| * Re-add removed crash kernel memory as reserved memory. This makes |
| * sure it will be mapped with the identity mapping and struct pages |
| * will be created, so it can be resized later on. |
| * However add it later since the crash kernel resource should not be |
| * part of the System RAM resource. |
| */ |
| if (crashk_res.end) { |
| memblock_add_node(crashk_res.start, resource_size(&crashk_res), 0); |
| memblock_reserve(crashk_res.start, resource_size(&crashk_res)); |
| insert_resource(&iomem_resource, &crashk_res); |
| } |
| #endif |
| } |
| |
| static void __init setup_memory_end(void) |
| { |
| unsigned long vmax, tmp; |
| |
| /* Choose kernel address space layout: 3 or 4 levels. */ |
| if (IS_ENABLED(CONFIG_KASAN)) { |
| vmax = IS_ENABLED(CONFIG_KASAN_S390_4_LEVEL_PAGING) |
| ? _REGION1_SIZE |
| : _REGION2_SIZE; |
| } else { |
| tmp = (memory_end ?: max_physmem_end) / PAGE_SIZE; |
| tmp = tmp * (sizeof(struct page) + PAGE_SIZE); |
| if (tmp + vmalloc_size + MODULES_LEN <= _REGION2_SIZE) |
| vmax = _REGION2_SIZE; /* 3-level kernel page table */ |
| else |
| vmax = _REGION1_SIZE; /* 4-level kernel page table */ |
| } |
| |
| /* module area is at the end of the kernel address space. */ |
| MODULES_END = vmax; |
| MODULES_VADDR = MODULES_END - MODULES_LEN; |
| VMALLOC_END = MODULES_VADDR; |
| VMALLOC_START = VMALLOC_END - vmalloc_size; |
| |
| /* Split remaining virtual space between 1:1 mapping & vmemmap array */ |
| tmp = VMALLOC_START / (PAGE_SIZE + sizeof(struct page)); |
| /* vmemmap contains a multiple of PAGES_PER_SECTION struct pages */ |
| tmp = SECTION_ALIGN_UP(tmp); |
| tmp = VMALLOC_START - tmp * sizeof(struct page); |
| tmp &= ~((vmax >> 11) - 1); /* align to page table level */ |
| tmp = min(tmp, 1UL << MAX_PHYSMEM_BITS); |
| vmemmap = (struct page *) tmp; |
| |
| /* Take care that memory_end is set and <= vmemmap */ |
| memory_end = min(memory_end ?: max_physmem_end, (unsigned long)vmemmap); |
| #ifdef CONFIG_KASAN |
| /* fit in kasan shadow memory region between 1:1 and vmemmap */ |
| memory_end = min(memory_end, KASAN_SHADOW_START); |
| vmemmap = max(vmemmap, (struct page *)KASAN_SHADOW_END); |
| #endif |
| max_pfn = max_low_pfn = PFN_DOWN(memory_end); |
| memblock_remove(memory_end, ULONG_MAX); |
| |
| pr_notice("The maximum memory size is %luMB\n", memory_end >> 20); |
| } |
| |
| #ifdef CONFIG_CRASH_DUMP |
| |
| /* |
| * When kdump is enabled, we have to ensure that no memory from |
| * the area [0 - crashkernel memory size] and |
| * [crashk_res.start - crashk_res.end] is set offline. |
| */ |
| static int kdump_mem_notifier(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| struct memory_notify *arg = data; |
| |
| if (action != MEM_GOING_OFFLINE) |
| return NOTIFY_OK; |
| if (arg->start_pfn < PFN_DOWN(resource_size(&crashk_res))) |
| return NOTIFY_BAD; |
| if (arg->start_pfn > PFN_DOWN(crashk_res.end)) |
| return NOTIFY_OK; |
| if (arg->start_pfn + arg->nr_pages - 1 < PFN_DOWN(crashk_res.start)) |
| return NOTIFY_OK; |
| return NOTIFY_BAD; |
| } |
| |
| static struct notifier_block kdump_mem_nb = { |
| .notifier_call = kdump_mem_notifier, |
| }; |
| |
| #endif |
| |
| /* |
| * Make sure that the area behind memory_end is protected |
| */ |
| static void reserve_memory_end(void) |
| { |
| if (memory_end_set) |
| memblock_reserve(memory_end, ULONG_MAX); |
| } |
| |
| /* |
| * Make sure that oldmem, where the dump is stored, is protected |
| */ |
| static void reserve_oldmem(void) |
| { |
| #ifdef CONFIG_CRASH_DUMP |
| if (OLDMEM_BASE) |
| /* Forget all memory above the running kdump system */ |
| memblock_reserve(OLDMEM_SIZE, (phys_addr_t)ULONG_MAX); |
| #endif |
| } |
| |
| /* |
| * Make sure that oldmem, where the dump is stored, is protected |
| */ |
| static void remove_oldmem(void) |
| { |
| #ifdef CONFIG_CRASH_DUMP |
| if (OLDMEM_BASE) |
| /* Forget all memory above the running kdump system */ |
| memblock_remove(OLDMEM_SIZE, (phys_addr_t)ULONG_MAX); |
| #endif |
| } |
| |
| /* |
| * Reserve memory for kdump kernel to be loaded with kexec |
| */ |
| static void __init reserve_crashkernel(void) |
| { |
| #ifdef CONFIG_CRASH_DUMP |
| unsigned long long crash_base, crash_size; |
| phys_addr_t low, high; |
| int rc; |
| |
| rc = parse_crashkernel(boot_command_line, memory_end, &crash_size, |
| &crash_base); |
| |
| crash_base = ALIGN(crash_base, KEXEC_CRASH_MEM_ALIGN); |
| crash_size = ALIGN(crash_size, KEXEC_CRASH_MEM_ALIGN); |
| if (rc || crash_size == 0) |
| return; |
| |
| if (memblock.memory.regions[0].size < crash_size) { |
| pr_info("crashkernel reservation failed: %s\n", |
| "first memory chunk must be at least crashkernel size"); |
| return; |
| } |
| |
| low = crash_base ?: OLDMEM_BASE; |
| high = low + crash_size; |
| if (low >= OLDMEM_BASE && high <= OLDMEM_BASE + OLDMEM_SIZE) { |
| /* The crashkernel fits into OLDMEM, reuse OLDMEM */ |
| crash_base = low; |
| } else { |
| /* Find suitable area in free memory */ |
| low = max_t(unsigned long, crash_size, sclp.hsa_size); |
| high = crash_base ? crash_base + crash_size : ULONG_MAX; |
| |
| if (crash_base && crash_base < low) { |
| pr_info("crashkernel reservation failed: %s\n", |
| "crash_base too low"); |
| return; |
| } |
| low = crash_base ?: low; |
| crash_base = memblock_find_in_range(low, high, crash_size, |
| KEXEC_CRASH_MEM_ALIGN); |
| } |
| |
| if (!crash_base) { |
| pr_info("crashkernel reservation failed: %s\n", |
| "no suitable area found"); |
| return; |
| } |
| |
| if (register_memory_notifier(&kdump_mem_nb)) |
| return; |
| |
| if (!OLDMEM_BASE && MACHINE_IS_VM) |
| diag10_range(PFN_DOWN(crash_base), PFN_DOWN(crash_size)); |
| crashk_res.start = crash_base; |
| crashk_res.end = crash_base + crash_size - 1; |
| memblock_remove(crash_base, crash_size); |
| pr_info("Reserving %lluMB of memory at %lluMB " |
| "for crashkernel (System RAM: %luMB)\n", |
| crash_size >> 20, crash_base >> 20, |
| (unsigned long)memblock.memory.total_size >> 20); |
| os_info_crashkernel_add(crash_base, crash_size); |
| #endif |
| } |
| |
| /* |
| * Reserve the initrd from being used by memblock |
| */ |
| static void __init reserve_initrd(void) |
| { |
| #ifdef CONFIG_BLK_DEV_INITRD |
| if (!INITRD_START || !INITRD_SIZE) |
| return; |
| initrd_start = INITRD_START; |
| initrd_end = initrd_start + INITRD_SIZE; |
| memblock_reserve(INITRD_START, INITRD_SIZE); |
| #endif |
| } |
| |
| /* |
| * Reserve the memory area used to pass the certificate lists |
| */ |
| static void __init reserve_certificate_list(void) |
| { |
| if (ipl_cert_list_addr) |
| memblock_reserve(ipl_cert_list_addr, ipl_cert_list_size); |
| } |
| |
| static void __init reserve_mem_detect_info(void) |
| { |
| unsigned long start, size; |
| |
| get_mem_detect_reserved(&start, &size); |
| if (size) |
| memblock_reserve(start, size); |
| } |
| |
| static void __init free_mem_detect_info(void) |
| { |
| unsigned long start, size; |
| |
| get_mem_detect_reserved(&start, &size); |
| if (size) |
| memblock_free(start, size); |
| } |
| |
| static void __init memblock_physmem_add(phys_addr_t start, phys_addr_t size) |
| { |
| memblock_dbg("memblock_physmem_add: [%#016llx-%#016llx]\n", |
| start, start + size - 1); |
| memblock_add_range(&memblock.memory, start, size, 0, 0); |
| memblock_add_range(&memblock.physmem, start, size, 0, 0); |
| } |
| |
| static const char * __init get_mem_info_source(void) |
| { |
| switch (mem_detect.info_source) { |
| case MEM_DETECT_SCLP_STOR_INFO: |
| return "sclp storage info"; |
| case MEM_DETECT_DIAG260: |
| return "diag260"; |
| case MEM_DETECT_SCLP_READ_INFO: |
| return "sclp read info"; |
| case MEM_DETECT_BIN_SEARCH: |
| return "binary search"; |
| } |
| return "none"; |
| } |
| |
| static void __init memblock_add_mem_detect_info(void) |
| { |
| unsigned long start, end; |
| int i; |
| |
| memblock_dbg("physmem info source: %s (%hhd)\n", |
| get_mem_info_source(), mem_detect.info_source); |
| /* keep memblock lists close to the kernel */ |
| memblock_set_bottom_up(true); |
| for_each_mem_detect_block(i, &start, &end) |
| memblock_physmem_add(start, end - start); |
| memblock_set_bottom_up(false); |
| memblock_dump_all(); |
| } |
| |
| /* |
| * Check for initrd being in usable memory |
| */ |
| static void __init check_initrd(void) |
| { |
| #ifdef CONFIG_BLK_DEV_INITRD |
| if (INITRD_START && INITRD_SIZE && |
| !memblock_is_region_memory(INITRD_START, INITRD_SIZE)) { |
| pr_err("The initial RAM disk does not fit into the memory\n"); |
| memblock_free(INITRD_START, INITRD_SIZE); |
| initrd_start = initrd_end = 0; |
| } |
| #endif |
| } |
| |
| /* |
| * Reserve memory used for lowcore/command line/kernel image. |
| */ |
| static void __init reserve_kernel(void) |
| { |
| unsigned long start_pfn = PFN_UP(__pa(_end)); |
| |
| memblock_reserve(0, HEAD_END); |
| memblock_reserve((unsigned long)_stext, PFN_PHYS(start_pfn) |
| - (unsigned long)_stext); |
| memblock_reserve(__sdma, __edma - __sdma); |
| } |
| |
| static void __init setup_memory(void) |
| { |
| struct memblock_region *reg; |
| |
| /* |
| * Init storage key for present memory |
| */ |
| for_each_memblock(memory, reg) { |
| storage_key_init_range(reg->base, reg->base + reg->size); |
| } |
| psw_set_key(PAGE_DEFAULT_KEY); |
| |
| /* Only cosmetics */ |
| memblock_enforce_memory_limit(memblock_end_of_DRAM()); |
| } |
| |
| /* |
| * Setup hardware capabilities. |
| */ |
| static int __init setup_hwcaps(void) |
| { |
| static const int stfl_bits[6] = { 0, 2, 7, 17, 19, 21 }; |
| struct cpuid cpu_id; |
| int i; |
| |
| /* |
| * The store facility list bits numbers as found in the principles |
| * of operation are numbered with bit 1UL<<31 as number 0 to |
| * bit 1UL<<0 as number 31. |
| * Bit 0: instructions named N3, "backported" to esa-mode |
| * Bit 2: z/Architecture mode is active |
| * Bit 7: the store-facility-list-extended facility is installed |
| * Bit 17: the message-security assist is installed |
| * Bit 19: the long-displacement facility is installed |
| * Bit 21: the extended-immediate facility is installed |
| * Bit 22: extended-translation facility 3 is installed |
| * Bit 30: extended-translation facility 3 enhancement facility |
| * These get translated to: |
| * HWCAP_S390_ESAN3 bit 0, HWCAP_S390_ZARCH bit 1, |
| * HWCAP_S390_STFLE bit 2, HWCAP_S390_MSA bit 3, |
| * HWCAP_S390_LDISP bit 4, HWCAP_S390_EIMM bit 5 and |
| * HWCAP_S390_ETF3EH bit 8 (22 && 30). |
| */ |
| for (i = 0; i < 6; i++) |
| if (test_facility(stfl_bits[i])) |
| elf_hwcap |= 1UL << i; |
| |
| if (test_facility(22) && test_facility(30)) |
| elf_hwcap |= HWCAP_S390_ETF3EH; |
| |
| /* |
| * Check for additional facilities with store-facility-list-extended. |
| * stfle stores doublewords (8 byte) with bit 1ULL<<63 as bit 0 |
| * and 1ULL<<0 as bit 63. Bits 0-31 contain the same information |
| * as stored by stfl, bits 32-xxx contain additional facilities. |
| * How many facility words are stored depends on the number of |
| * doublewords passed to the instruction. The additional facilities |
| * are: |
| * Bit 42: decimal floating point facility is installed |
| * Bit 44: perform floating point operation facility is installed |
| * translated to: |
| * HWCAP_S390_DFP bit 6 (42 && 44). |
| */ |
| if ((elf_hwcap & (1UL << 2)) && test_facility(42) && test_facility(44)) |
| elf_hwcap |= HWCAP_S390_DFP; |
| |
| /* |
| * Huge page support HWCAP_S390_HPAGE is bit 7. |
| */ |
| if (MACHINE_HAS_EDAT1) |
| elf_hwcap |= HWCAP_S390_HPAGE; |
| |
| /* |
| * 64-bit register support for 31-bit processes |
| * HWCAP_S390_HIGH_GPRS is bit 9. |
| */ |
| elf_hwcap |= HWCAP_S390_HIGH_GPRS; |
| |
| /* |
| * Transactional execution support HWCAP_S390_TE is bit 10. |
| */ |
| if (MACHINE_HAS_TE) |
| elf_hwcap |= HWCAP_S390_TE; |
| |
| /* |
| * Vector extension HWCAP_S390_VXRS is bit 11. The Vector extension |
| * can be disabled with the "novx" parameter. Use MACHINE_HAS_VX |
| * instead of facility bit 129. |
| */ |
| if (MACHINE_HAS_VX) { |
| elf_hwcap |= HWCAP_S390_VXRS; |
| if (test_facility(134)) |
| elf_hwcap |= HWCAP_S390_VXRS_EXT; |
| if (test_facility(135)) |
| elf_hwcap |= HWCAP_S390_VXRS_BCD; |
| if (test_facility(148)) |
| elf_hwcap |= HWCAP_S390_VXRS_EXT2; |
| if (test_facility(152)) |
| elf_hwcap |= HWCAP_S390_VXRS_PDE; |
| } |
| if (test_facility(150)) |
| elf_hwcap |= HWCAP_S390_SORT; |
| if (test_facility(151)) |
| elf_hwcap |= HWCAP_S390_DFLT; |
| |
| /* |
| * Guarded storage support HWCAP_S390_GS is bit 12. |
| */ |
| if (MACHINE_HAS_GS) |
| elf_hwcap |= HWCAP_S390_GS; |
| |
| get_cpu_id(&cpu_id); |
| add_device_randomness(&cpu_id, sizeof(cpu_id)); |
| switch (cpu_id.machine) { |
| case 0x2064: |
| case 0x2066: |
| default: /* Use "z900" as default for 64 bit kernels. */ |
| strcpy(elf_platform, "z900"); |
| break; |
| case 0x2084: |
| case 0x2086: |
| strcpy(elf_platform, "z990"); |
| break; |
| case 0x2094: |
| case 0x2096: |
| strcpy(elf_platform, "z9-109"); |
| break; |
| case 0x2097: |
| case 0x2098: |
| strcpy(elf_platform, "z10"); |
| break; |
| case 0x2817: |
| case 0x2818: |
| strcpy(elf_platform, "z196"); |
| break; |
| case 0x2827: |
| case 0x2828: |
| strcpy(elf_platform, "zEC12"); |
| break; |
| case 0x2964: |
| case 0x2965: |
| strcpy(elf_platform, "z13"); |
| break; |
| case 0x3906: |
| case 0x3907: |
| strcpy(elf_platform, "z14"); |
| break; |
| case 0x8561: |
| case 0x8562: |
| strcpy(elf_platform, "z15"); |
| break; |
| } |
| |
| /* |
| * Virtualization support HWCAP_INT_SIE is bit 0. |
| */ |
| if (sclp.has_sief2) |
| int_hwcap |= HWCAP_INT_SIE; |
| |
| return 0; |
| } |
| arch_initcall(setup_hwcaps); |
| |
| /* |
| * Add system information as device randomness |
| */ |
| static void __init setup_randomness(void) |
| { |
| struct sysinfo_3_2_2 *vmms; |
| |
| vmms = (struct sysinfo_3_2_2 *) memblock_phys_alloc(PAGE_SIZE, |
| PAGE_SIZE); |
| if (!vmms) |
| panic("Failed to allocate memory for sysinfo structure\n"); |
| |
| if (stsi(vmms, 3, 2, 2) == 0 && vmms->count) |
| add_device_randomness(&vmms->vm, sizeof(vmms->vm[0]) * vmms->count); |
| memblock_free((unsigned long) vmms, PAGE_SIZE); |
| } |
| |
| /* |
| * Find the correct size for the task_struct. This depends on |
| * the size of the struct fpu at the end of the thread_struct |
| * which is embedded in the task_struct. |
| */ |
| static void __init setup_task_size(void) |
| { |
| int task_size = sizeof(struct task_struct); |
| |
| if (!MACHINE_HAS_VX) { |
| task_size -= sizeof(__vector128) * __NUM_VXRS; |
| task_size += sizeof(freg_t) * __NUM_FPRS; |
| } |
| arch_task_struct_size = task_size; |
| } |
| |
| /* |
| * Issue diagnose 318 to set the control program name and |
| * version codes. |
| */ |
| static void __init setup_control_program_code(void) |
| { |
| union diag318_info diag318_info = { |
| .cpnc = CPNC_LINUX, |
| .cpvc_linux = 0, |
| .cpvc_distro = {0}, |
| }; |
| |
| if (!sclp.has_diag318) |
| return; |
| |
| diag_stat_inc(DIAG_STAT_X318); |
| asm volatile("diag %0,0,0x318\n" : : "d" (diag318_info.val)); |
| } |
| |
| /* |
| * Print the component list from the IPL report |
| */ |
| static void __init log_component_list(void) |
| { |
| struct ipl_rb_component_entry *ptr, *end; |
| char *str; |
| |
| if (!early_ipl_comp_list_addr) |
| return; |
| if (ipl_block.hdr.flags & IPL_PL_FLAG_IPLSR) |
| pr_info("Linux is running with Secure-IPL enabled\n"); |
| else |
| pr_info("Linux is running with Secure-IPL disabled\n"); |
| ptr = (void *) early_ipl_comp_list_addr; |
| end = (void *) ptr + early_ipl_comp_list_size; |
| pr_info("The IPL report contains the following components:\n"); |
| while (ptr < end) { |
| if (ptr->flags & IPL_RB_COMPONENT_FLAG_SIGNED) { |
| if (ptr->flags & IPL_RB_COMPONENT_FLAG_VERIFIED) |
| str = "signed, verified"; |
| else |
| str = "signed, verification failed"; |
| } else { |
| str = "not signed"; |
| } |
| pr_info("%016llx - %016llx (%s)\n", |
| ptr->addr, ptr->addr + ptr->len, str); |
| ptr++; |
| } |
| } |
| |
| /* |
| * Setup function called from init/main.c just after the banner |
| * was printed. |
| */ |
| |
| void __init setup_arch(char **cmdline_p) |
| { |
| /* |
| * print what head.S has found out about the machine |
| */ |
| if (MACHINE_IS_VM) |
| pr_info("Linux is running as a z/VM " |
| "guest operating system in 64-bit mode\n"); |
| else if (MACHINE_IS_KVM) |
| pr_info("Linux is running under KVM in 64-bit mode\n"); |
| else if (MACHINE_IS_LPAR) |
| pr_info("Linux is running natively in 64-bit mode\n"); |
| else |
| pr_info("Linux is running as a guest in 64-bit mode\n"); |
| |
| log_component_list(); |
| |
| /* Have one command line that is parsed and saved in /proc/cmdline */ |
| /* boot_command_line has been already set up in early.c */ |
| *cmdline_p = boot_command_line; |
| |
| ROOT_DEV = Root_RAM0; |
| |
| init_mm.start_code = (unsigned long) _text; |
| init_mm.end_code = (unsigned long) _etext; |
| init_mm.end_data = (unsigned long) _edata; |
| init_mm.brk = (unsigned long) _end; |
| |
| if (IS_ENABLED(CONFIG_EXPOLINE_AUTO)) |
| nospec_auto_detect(); |
| |
| parse_early_param(); |
| #ifdef CONFIG_CRASH_DUMP |
| /* Deactivate elfcorehdr= kernel parameter */ |
| elfcorehdr_addr = ELFCORE_ADDR_MAX; |
| #endif |
| |
| os_info_init(); |
| setup_ipl(); |
| setup_task_size(); |
| setup_control_program_code(); |
| |
| /* Do some memory reservations *before* memory is added to memblock */ |
| reserve_memory_end(); |
| reserve_oldmem(); |
| reserve_kernel(); |
| reserve_initrd(); |
| reserve_certificate_list(); |
| reserve_mem_detect_info(); |
| memblock_allow_resize(); |
| |
| /* Get information about *all* installed memory */ |
| memblock_add_mem_detect_info(); |
| |
| free_mem_detect_info(); |
| remove_oldmem(); |
| |
| /* |
| * Make sure all chunks are MAX_ORDER aligned so we don't need the |
| * extra checks that HOLES_IN_ZONE would require. |
| * |
| * Is this still required? |
| */ |
| memblock_trim_memory(1UL << (MAX_ORDER - 1 + PAGE_SHIFT)); |
| |
| setup_memory_end(); |
| setup_memory(); |
| dma_contiguous_reserve(memory_end); |
| vmcp_cma_reserve(); |
| |
| check_initrd(); |
| reserve_crashkernel(); |
| #ifdef CONFIG_CRASH_DUMP |
| /* |
| * Be aware that smp_save_dump_cpus() triggers a system reset. |
| * Therefore CPU and device initialization should be done afterwards. |
| */ |
| smp_save_dump_cpus(); |
| #endif |
| |
| setup_resources(); |
| setup_lowcore_dat_off(); |
| smp_fill_possible_mask(); |
| cpu_detect_mhz_feature(); |
| cpu_init(); |
| numa_setup(); |
| smp_detect_cpus(); |
| topology_init_early(); |
| |
| /* |
| * Create kernel page tables and switch to virtual addressing. |
| */ |
| paging_init(); |
| |
| /* |
| * After paging_init created the kernel page table, the new PSWs |
| * in lowcore can now run with DAT enabled. |
| */ |
| setup_lowcore_dat_on(); |
| |
| /* Setup default console */ |
| conmode_default(); |
| set_preferred_console(); |
| |
| apply_alternative_instructions(); |
| if (IS_ENABLED(CONFIG_EXPOLINE)) |
| nospec_init_branches(); |
| |
| /* Setup zfcpdump support */ |
| setup_zfcpdump(); |
| |
| /* Add system specific data to the random pool */ |
| setup_randomness(); |
| } |