blob: bb8e499b99008e6398eb04a89fccce0ed1f0935f [file] [log] [blame]
/*
* arch/xtensa/kernel/coprocessor.S
*
* Xtensa processor configuration-specific table of coprocessor and
* other custom register layout information.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 - 2007 Tensilica Inc.
*/
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/asmmacro.h>
#include <asm/coprocessor.h>
#include <asm/current.h>
#include <asm/regs.h>
#if XTENSA_HAVE_COPROCESSORS
/*
* Macros for lazy context switch.
*/
#define SAVE_CP_REGS(x) \
.if XTENSA_HAVE_COPROCESSOR(x); \
.align 4; \
.Lsave_cp_regs_cp##x: \
xchal_cp##x##_store a2 a4 a5 a6 a7; \
jx a0; \
.endif
#define SAVE_CP_REGS_TAB(x) \
.if XTENSA_HAVE_COPROCESSOR(x); \
.long .Lsave_cp_regs_cp##x; \
.else; \
.long 0; \
.endif; \
.long THREAD_XTREGS_CP##x
#define LOAD_CP_REGS(x) \
.if XTENSA_HAVE_COPROCESSOR(x); \
.align 4; \
.Lload_cp_regs_cp##x: \
xchal_cp##x##_load a2 a4 a5 a6 a7; \
jx a0; \
.endif
#define LOAD_CP_REGS_TAB(x) \
.if XTENSA_HAVE_COPROCESSOR(x); \
.long .Lload_cp_regs_cp##x; \
.else; \
.long 0; \
.endif; \
.long THREAD_XTREGS_CP##x
SAVE_CP_REGS(0)
SAVE_CP_REGS(1)
SAVE_CP_REGS(2)
SAVE_CP_REGS(3)
SAVE_CP_REGS(4)
SAVE_CP_REGS(5)
SAVE_CP_REGS(6)
SAVE_CP_REGS(7)
LOAD_CP_REGS(0)
LOAD_CP_REGS(1)
LOAD_CP_REGS(2)
LOAD_CP_REGS(3)
LOAD_CP_REGS(4)
LOAD_CP_REGS(5)
LOAD_CP_REGS(6)
LOAD_CP_REGS(7)
.section ".rodata", "a"
.align 4
.Lsave_cp_regs_jump_table:
SAVE_CP_REGS_TAB(0)
SAVE_CP_REGS_TAB(1)
SAVE_CP_REGS_TAB(2)
SAVE_CP_REGS_TAB(3)
SAVE_CP_REGS_TAB(4)
SAVE_CP_REGS_TAB(5)
SAVE_CP_REGS_TAB(6)
SAVE_CP_REGS_TAB(7)
.Lload_cp_regs_jump_table:
LOAD_CP_REGS_TAB(0)
LOAD_CP_REGS_TAB(1)
LOAD_CP_REGS_TAB(2)
LOAD_CP_REGS_TAB(3)
LOAD_CP_REGS_TAB(4)
LOAD_CP_REGS_TAB(5)
LOAD_CP_REGS_TAB(6)
LOAD_CP_REGS_TAB(7)
.previous
/*
* coprocessor_flush(struct thread_info*, index)
* a2 a3
*
* Save coprocessor registers for coprocessor 'index'.
* The register values are saved to or loaded from the coprocessor area
* inside the task_info structure.
*
* Note that this function doesn't update the coprocessor_owner information!
*
*/
ENTRY(coprocessor_flush)
/* reserve 4 bytes on stack to save a0 */
abi_entry(4)
s32i a0, a1, 0
movi a0, .Lsave_cp_regs_jump_table
addx8 a3, a3, a0
l32i a4, a3, 4
l32i a3, a3, 0
add a2, a2, a4
beqz a3, 1f
callx0 a3
1: l32i a0, a1, 0
abi_ret(4)
ENDPROC(coprocessor_flush)
/*
* Entry condition:
*
* a0: trashed, original value saved on stack (PT_AREG0)
* a1: a1
* a2: new stack pointer, original in DEPC
* a3: a3
* depc: a2, original value saved on stack (PT_DEPC)
* excsave_1: dispatch table
*
* PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
* < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
*/
ENTRY(fast_coprocessor_double)
wsr a0, excsave1
call0 unrecoverable_exception
ENDPROC(fast_coprocessor_double)
ENTRY(fast_coprocessor)
/* Save remaining registers a1-a3 and SAR */
s32i a3, a2, PT_AREG3
rsr a3, sar
s32i a1, a2, PT_AREG1
s32i a3, a2, PT_SAR
mov a1, a2
rsr a2, depc
s32i a2, a1, PT_AREG2
/*
* The hal macros require up to 4 temporary registers. We use a3..a6.
*/
s32i a4, a1, PT_AREG4
s32i a5, a1, PT_AREG5
s32i a6, a1, PT_AREG6
/* Find coprocessor number. Subtract first CP EXCCAUSE from EXCCAUSE */
rsr a3, exccause
addi a3, a3, -EXCCAUSE_COPROCESSOR0_DISABLED
/* Set corresponding CPENABLE bit -> (sar:cp-index, a3: 1<<cp-index)*/
ssl a3 # SAR: 32 - coprocessor_number
movi a2, 1
rsr a0, cpenable
sll a2, a2
or a0, a0, a2
wsr a0, cpenable
rsync
/* Retrieve previous owner. (a3 still holds CP number) */
movi a0, coprocessor_owner # list of owners
addx4 a0, a3, a0 # entry for CP
l32i a4, a0, 0
beqz a4, 1f # skip 'save' if no previous owner
/* Disable coprocessor for previous owner. (a2 = 1 << CP number) */
l32i a5, a4, THREAD_CPENABLE
xor a5, a5, a2 # (1 << cp-id) still in a2
s32i a5, a4, THREAD_CPENABLE
/*
* Get context save area and 'call' save routine.
* (a4 still holds previous owner (thread_info), a3 CP number)
*/
movi a5, .Lsave_cp_regs_jump_table
movi a0, 2f # a0: 'return' address
addx8 a3, a3, a5 # a3: coprocessor number
l32i a2, a3, 4 # a2: xtregs offset
l32i a3, a3, 0 # a3: jump address
add a2, a2, a4
jx a3
/* Note that only a0 and a1 were preserved. */
2: rsr a3, exccause
addi a3, a3, -EXCCAUSE_COPROCESSOR0_DISABLED
movi a0, coprocessor_owner
addx4 a0, a3, a0
/* Set new 'owner' (a0 points to the CP owner, a3 contains the CP nr) */
1: GET_THREAD_INFO (a4, a1)
s32i a4, a0, 0
/* Get context save area and 'call' load routine. */
movi a5, .Lload_cp_regs_jump_table
movi a0, 1f
addx8 a3, a3, a5
l32i a2, a3, 4 # a2: xtregs offset
l32i a3, a3, 0 # a3: jump address
add a2, a2, a4
jx a3
/* Restore all registers and return from exception handler. */
1: l32i a6, a1, PT_AREG6
l32i a5, a1, PT_AREG5
l32i a4, a1, PT_AREG4
l32i a0, a1, PT_SAR
l32i a3, a1, PT_AREG3
l32i a2, a1, PT_AREG2
wsr a0, sar
l32i a0, a1, PT_AREG0
l32i a1, a1, PT_AREG1
rfe
ENDPROC(fast_coprocessor)
.data
ENTRY(coprocessor_owner)
.fill XCHAL_CP_MAX, 4, 0
END(coprocessor_owner)
#endif /* XTENSA_HAVE_COPROCESSORS */