| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> |
| * JZ4740 platform PWM support |
| * |
| * Limitations: |
| * - The .apply callback doesn't complete the currently running period before |
| * reconfiguring the hardware. |
| * - Each period starts with the inactive part. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/gpio.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| |
| #include <asm/mach-jz4740/timer.h> |
| |
| #define NUM_PWM 8 |
| |
| struct jz4740_pwm_chip { |
| struct pwm_chip chip; |
| struct clk *clk; |
| }; |
| |
| static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct jz4740_pwm_chip, chip); |
| } |
| |
| static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| /* |
| * Timers 0 and 1 are used for system tasks, so they are unavailable |
| * for use as PWMs. |
| */ |
| if (pwm->hwpwm < 2) |
| return -EBUSY; |
| |
| jz4740_timer_start(pwm->hwpwm); |
| |
| return 0; |
| } |
| |
| static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| jz4740_timer_set_ctrl(pwm->hwpwm, 0); |
| |
| jz4740_timer_stop(pwm->hwpwm); |
| } |
| |
| static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| uint32_t ctrl = jz4740_timer_get_ctrl(pwm->pwm); |
| |
| ctrl |= JZ_TIMER_CTRL_PWM_ENABLE; |
| jz4740_timer_set_ctrl(pwm->hwpwm, ctrl); |
| jz4740_timer_enable(pwm->hwpwm); |
| |
| return 0; |
| } |
| |
| static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| uint32_t ctrl = jz4740_timer_get_ctrl(pwm->hwpwm); |
| |
| /* |
| * Set duty > period. This trick allows the TCU channels in TCU2 mode to |
| * properly return to their init level. |
| */ |
| jz4740_timer_set_duty(pwm->hwpwm, 0xffff); |
| jz4740_timer_set_period(pwm->hwpwm, 0x0); |
| |
| /* |
| * Disable PWM output. |
| * In TCU2 mode (channel 1/2 on JZ4750+), this must be done before the |
| * counter is stopped, while in TCU1 mode the order does not matter. |
| */ |
| ctrl &= ~JZ_TIMER_CTRL_PWM_ENABLE; |
| jz4740_timer_set_ctrl(pwm->hwpwm, ctrl); |
| |
| /* Stop counter */ |
| jz4740_timer_disable(pwm->hwpwm); |
| } |
| |
| static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, |
| const struct pwm_state *state) |
| { |
| struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip); |
| unsigned long long tmp; |
| unsigned long period, duty; |
| unsigned int prescaler = 0; |
| uint16_t ctrl; |
| |
| tmp = (unsigned long long)clk_get_rate(jz4740->clk) * state->period; |
| do_div(tmp, 1000000000); |
| period = tmp; |
| |
| while (period > 0xffff && prescaler < 6) { |
| period >>= 2; |
| ++prescaler; |
| } |
| |
| if (prescaler == 6) |
| return -EINVAL; |
| |
| tmp = (unsigned long long)period * state->duty_cycle; |
| do_div(tmp, state->period); |
| duty = period - tmp; |
| |
| if (duty >= period) |
| duty = period - 1; |
| |
| jz4740_pwm_disable(chip, pwm); |
| |
| jz4740_timer_set_count(pwm->hwpwm, 0); |
| jz4740_timer_set_duty(pwm->hwpwm, duty); |
| jz4740_timer_set_period(pwm->hwpwm, period); |
| |
| ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT | |
| JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN; |
| |
| jz4740_timer_set_ctrl(pwm->hwpwm, ctrl); |
| |
| switch (state->polarity) { |
| case PWM_POLARITY_NORMAL: |
| ctrl &= ~JZ_TIMER_CTRL_PWM_ACTIVE_LOW; |
| break; |
| case PWM_POLARITY_INVERSED: |
| ctrl |= JZ_TIMER_CTRL_PWM_ACTIVE_LOW; |
| break; |
| } |
| |
| jz4740_timer_set_ctrl(pwm->hwpwm, ctrl); |
| |
| if (state->enabled) |
| jz4740_pwm_enable(chip, pwm); |
| |
| return 0; |
| } |
| |
| static const struct pwm_ops jz4740_pwm_ops = { |
| .request = jz4740_pwm_request, |
| .free = jz4740_pwm_free, |
| .apply = jz4740_pwm_apply, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int jz4740_pwm_probe(struct platform_device *pdev) |
| { |
| struct jz4740_pwm_chip *jz4740; |
| |
| jz4740 = devm_kzalloc(&pdev->dev, sizeof(*jz4740), GFP_KERNEL); |
| if (!jz4740) |
| return -ENOMEM; |
| |
| jz4740->clk = devm_clk_get(&pdev->dev, "ext"); |
| if (IS_ERR(jz4740->clk)) |
| return PTR_ERR(jz4740->clk); |
| |
| jz4740->chip.dev = &pdev->dev; |
| jz4740->chip.ops = &jz4740_pwm_ops; |
| jz4740->chip.npwm = NUM_PWM; |
| jz4740->chip.base = -1; |
| jz4740->chip.of_xlate = of_pwm_xlate_with_flags; |
| jz4740->chip.of_pwm_n_cells = 3; |
| |
| platform_set_drvdata(pdev, jz4740); |
| |
| return pwmchip_add(&jz4740->chip); |
| } |
| |
| static int jz4740_pwm_remove(struct platform_device *pdev) |
| { |
| struct jz4740_pwm_chip *jz4740 = platform_get_drvdata(pdev); |
| |
| return pwmchip_remove(&jz4740->chip); |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id jz4740_pwm_dt_ids[] = { |
| { .compatible = "ingenic,jz4740-pwm", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, jz4740_pwm_dt_ids); |
| #endif |
| |
| static struct platform_driver jz4740_pwm_driver = { |
| .driver = { |
| .name = "jz4740-pwm", |
| .of_match_table = of_match_ptr(jz4740_pwm_dt_ids), |
| }, |
| .probe = jz4740_pwm_probe, |
| .remove = jz4740_pwm_remove, |
| }; |
| module_platform_driver(jz4740_pwm_driver); |
| |
| MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); |
| MODULE_DESCRIPTION("Ingenic JZ4740 PWM driver"); |
| MODULE_ALIAS("platform:jz4740-pwm"); |
| MODULE_LICENSE("GPL"); |