| /* |
| * QLogic Fibre Channel HBA Driver |
| * Copyright (c) 2003-2014 QLogic Corporation |
| * |
| * See LICENSE.qla2xxx for copyright and licensing details. |
| */ |
| #include "qla_def.h" |
| |
| #include <linux/moduleparam.h> |
| #include <linux/vmalloc.h> |
| #include <linux/delay.h> |
| #include <linux/kthread.h> |
| #include <linux/mutex.h> |
| #include <linux/kobject.h> |
| #include <linux/slab.h> |
| #include <linux/blk-mq-pci.h> |
| #include <linux/refcount.h> |
| |
| #include <scsi/scsi_tcq.h> |
| #include <scsi/scsicam.h> |
| #include <scsi/scsi_transport.h> |
| #include <scsi/scsi_transport_fc.h> |
| |
| #include "qla_target.h" |
| |
| /* |
| * Driver version |
| */ |
| char qla2x00_version_str[40]; |
| |
| static int apidev_major; |
| |
| /* |
| * SRB allocation cache |
| */ |
| struct kmem_cache *srb_cachep; |
| |
| /* |
| * CT6 CTX allocation cache |
| */ |
| static struct kmem_cache *ctx_cachep; |
| /* |
| * error level for logging |
| */ |
| uint ql_errlev = 0x8001; |
| |
| static int ql2xenableclass2; |
| module_param(ql2xenableclass2, int, S_IRUGO|S_IRUSR); |
| MODULE_PARM_DESC(ql2xenableclass2, |
| "Specify if Class 2 operations are supported from the very " |
| "beginning. Default is 0 - class 2 not supported."); |
| |
| |
| int ql2xlogintimeout = 20; |
| module_param(ql2xlogintimeout, int, S_IRUGO); |
| MODULE_PARM_DESC(ql2xlogintimeout, |
| "Login timeout value in seconds."); |
| |
| int qlport_down_retry; |
| module_param(qlport_down_retry, int, S_IRUGO); |
| MODULE_PARM_DESC(qlport_down_retry, |
| "Maximum number of command retries to a port that returns " |
| "a PORT-DOWN status."); |
| |
| int ql2xplogiabsentdevice; |
| module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(ql2xplogiabsentdevice, |
| "Option to enable PLOGI to devices that are not present after " |
| "a Fabric scan. This is needed for several broken switches. " |
| "Default is 0 - no PLOGI. 1 - perform PLOGI."); |
| |
| int ql2xloginretrycount; |
| module_param(ql2xloginretrycount, int, S_IRUGO); |
| MODULE_PARM_DESC(ql2xloginretrycount, |
| "Specify an alternate value for the NVRAM login retry count."); |
| |
| int ql2xallocfwdump = 1; |
| module_param(ql2xallocfwdump, int, S_IRUGO); |
| MODULE_PARM_DESC(ql2xallocfwdump, |
| "Option to enable allocation of memory for a firmware dump " |
| "during HBA initialization. Memory allocation requirements " |
| "vary by ISP type. Default is 1 - allocate memory."); |
| |
| int ql2xextended_error_logging; |
| module_param(ql2xextended_error_logging, int, S_IRUGO|S_IWUSR); |
| module_param_named(logging, ql2xextended_error_logging, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(ql2xextended_error_logging, |
| "Option to enable extended error logging,\n" |
| "\t\tDefault is 0 - no logging. 0x40000000 - Module Init & Probe.\n" |
| "\t\t0x20000000 - Mailbox Cmnds. 0x10000000 - Device Discovery.\n" |
| "\t\t0x08000000 - IO tracing. 0x04000000 - DPC Thread.\n" |
| "\t\t0x02000000 - Async events. 0x01000000 - Timer routines.\n" |
| "\t\t0x00800000 - User space. 0x00400000 - Task Management.\n" |
| "\t\t0x00200000 - AER/EEH. 0x00100000 - Multi Q.\n" |
| "\t\t0x00080000 - P3P Specific. 0x00040000 - Virtual Port.\n" |
| "\t\t0x00020000 - Buffer Dump. 0x00010000 - Misc.\n" |
| "\t\t0x00008000 - Verbose. 0x00004000 - Target.\n" |
| "\t\t0x00002000 - Target Mgmt. 0x00001000 - Target TMF.\n" |
| "\t\t0x7fffffff - For enabling all logs, can be too many logs.\n" |
| "\t\t0x1e400000 - Preferred value for capturing essential " |
| "debug information (equivalent to old " |
| "ql2xextended_error_logging=1).\n" |
| "\t\tDo LOGICAL OR of the value to enable more than one level"); |
| |
| int ql2xshiftctondsd = 6; |
| module_param(ql2xshiftctondsd, int, S_IRUGO); |
| MODULE_PARM_DESC(ql2xshiftctondsd, |
| "Set to control shifting of command type processing " |
| "based on total number of SG elements."); |
| |
| int ql2xfdmienable = 1; |
| module_param(ql2xfdmienable, int, S_IRUGO|S_IWUSR); |
| module_param_named(fdmi, ql2xfdmienable, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(ql2xfdmienable, |
| "Enables FDMI registrations. " |
| "0 - no FDMI. Default is 1 - perform FDMI."); |
| |
| #define MAX_Q_DEPTH 64 |
| static int ql2xmaxqdepth = MAX_Q_DEPTH; |
| module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(ql2xmaxqdepth, |
| "Maximum queue depth to set for each LUN. " |
| "Default is 64."); |
| |
| #if (IS_ENABLED(CONFIG_NVME_FC)) |
| int ql2xenabledif; |
| #else |
| int ql2xenabledif = 2; |
| #endif |
| module_param(ql2xenabledif, int, S_IRUGO); |
| MODULE_PARM_DESC(ql2xenabledif, |
| " Enable T10-CRC-DIF:\n" |
| " Default is 2.\n" |
| " 0 -- No DIF Support\n" |
| " 1 -- Enable DIF for all types\n" |
| " 2 -- Enable DIF for all types, except Type 0.\n"); |
| |
| #if (IS_ENABLED(CONFIG_NVME_FC)) |
| int ql2xnvmeenable = 1; |
| #else |
| int ql2xnvmeenable; |
| #endif |
| module_param(ql2xnvmeenable, int, 0644); |
| MODULE_PARM_DESC(ql2xnvmeenable, |
| "Enables NVME support. " |
| "0 - no NVMe. Default is Y"); |
| |
| int ql2xenablehba_err_chk = 2; |
| module_param(ql2xenablehba_err_chk, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(ql2xenablehba_err_chk, |
| " Enable T10-CRC-DIF Error isolation by HBA:\n" |
| " Default is 2.\n" |
| " 0 -- Error isolation disabled\n" |
| " 1 -- Error isolation enabled only for DIX Type 0\n" |
| " 2 -- Error isolation enabled for all Types\n"); |
| |
| int ql2xiidmaenable = 1; |
| module_param(ql2xiidmaenable, int, S_IRUGO); |
| MODULE_PARM_DESC(ql2xiidmaenable, |
| "Enables iIDMA settings " |
| "Default is 1 - perform iIDMA. 0 - no iIDMA."); |
| |
| int ql2xmqsupport = 1; |
| module_param(ql2xmqsupport, int, S_IRUGO); |
| MODULE_PARM_DESC(ql2xmqsupport, |
| "Enable on demand multiple queue pairs support " |
| "Default is 1 for supported. " |
| "Set it to 0 to turn off mq qpair support."); |
| |
| int ql2xfwloadbin; |
| module_param(ql2xfwloadbin, int, S_IRUGO|S_IWUSR); |
| module_param_named(fwload, ql2xfwloadbin, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(ql2xfwloadbin, |
| "Option to specify location from which to load ISP firmware:.\n" |
| " 2 -- load firmware via the request_firmware() (hotplug).\n" |
| " interface.\n" |
| " 1 -- load firmware from flash.\n" |
| " 0 -- use default semantics.\n"); |
| |
| int ql2xetsenable; |
| module_param(ql2xetsenable, int, S_IRUGO); |
| MODULE_PARM_DESC(ql2xetsenable, |
| "Enables firmware ETS burst." |
| "Default is 0 - skip ETS enablement."); |
| |
| int ql2xdbwr = 1; |
| module_param(ql2xdbwr, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(ql2xdbwr, |
| "Option to specify scheme for request queue posting.\n" |
| " 0 -- Regular doorbell.\n" |
| " 1 -- CAMRAM doorbell (faster).\n"); |
| |
| int ql2xtargetreset = 1; |
| module_param(ql2xtargetreset, int, S_IRUGO); |
| MODULE_PARM_DESC(ql2xtargetreset, |
| "Enable target reset." |
| "Default is 1 - use hw defaults."); |
| |
| int ql2xgffidenable; |
| module_param(ql2xgffidenable, int, S_IRUGO); |
| MODULE_PARM_DESC(ql2xgffidenable, |
| "Enables GFF_ID checks of port type. " |
| "Default is 0 - Do not use GFF_ID information."); |
| |
| int ql2xasynctmfenable = 1; |
| module_param(ql2xasynctmfenable, int, S_IRUGO); |
| MODULE_PARM_DESC(ql2xasynctmfenable, |
| "Enables issue of TM IOCBs asynchronously via IOCB mechanism" |
| "Default is 1 - Issue TM IOCBs via mailbox mechanism."); |
| |
| int ql2xdontresethba; |
| module_param(ql2xdontresethba, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(ql2xdontresethba, |
| "Option to specify reset behaviour.\n" |
| " 0 (Default) -- Reset on failure.\n" |
| " 1 -- Do not reset on failure.\n"); |
| |
| uint64_t ql2xmaxlun = MAX_LUNS; |
| module_param(ql2xmaxlun, ullong, S_IRUGO); |
| MODULE_PARM_DESC(ql2xmaxlun, |
| "Defines the maximum LU number to register with the SCSI " |
| "midlayer. Default is 65535."); |
| |
| int ql2xmdcapmask = 0x1F; |
| module_param(ql2xmdcapmask, int, S_IRUGO); |
| MODULE_PARM_DESC(ql2xmdcapmask, |
| "Set the Minidump driver capture mask level. " |
| "Default is 0x1F - Can be set to 0x3, 0x7, 0xF, 0x1F, 0x7F."); |
| |
| int ql2xmdenable = 1; |
| module_param(ql2xmdenable, int, S_IRUGO); |
| MODULE_PARM_DESC(ql2xmdenable, |
| "Enable/disable MiniDump. " |
| "0 - MiniDump disabled. " |
| "1 (Default) - MiniDump enabled."); |
| |
| int ql2xexlogins; |
| module_param(ql2xexlogins, uint, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(ql2xexlogins, |
| "Number of extended Logins. " |
| "0 (Default)- Disabled."); |
| |
| int ql2xexchoffld = 1024; |
| module_param(ql2xexchoffld, uint, 0644); |
| MODULE_PARM_DESC(ql2xexchoffld, |
| "Number of target exchanges."); |
| |
| int ql2xiniexchg = 1024; |
| module_param(ql2xiniexchg, uint, 0644); |
| MODULE_PARM_DESC(ql2xiniexchg, |
| "Number of initiator exchanges."); |
| |
| int ql2xfwholdabts; |
| module_param(ql2xfwholdabts, int, S_IRUGO); |
| MODULE_PARM_DESC(ql2xfwholdabts, |
| "Allow FW to hold status IOCB until ABTS rsp received. " |
| "0 (Default) Do not set fw option. " |
| "1 - Set fw option to hold ABTS."); |
| |
| int ql2xmvasynctoatio = 1; |
| module_param(ql2xmvasynctoatio, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(ql2xmvasynctoatio, |
| "Move PUREX, ABTS RX and RIDA IOCBs to ATIOQ" |
| "0 (Default). Do not move IOCBs" |
| "1 - Move IOCBs."); |
| |
| int ql2xautodetectsfp = 1; |
| module_param(ql2xautodetectsfp, int, 0444); |
| MODULE_PARM_DESC(ql2xautodetectsfp, |
| "Detect SFP range and set appropriate distance.\n" |
| "1 (Default): Enable\n"); |
| |
| int ql2xenablemsix = 1; |
| module_param(ql2xenablemsix, int, 0444); |
| MODULE_PARM_DESC(ql2xenablemsix, |
| "Set to enable MSI or MSI-X interrupt mechanism.\n" |
| " Default is 1, enable MSI-X interrupt mechanism.\n" |
| " 0 -- enable traditional pin-based mechanism.\n" |
| " 1 -- enable MSI-X interrupt mechanism.\n" |
| " 2 -- enable MSI interrupt mechanism.\n"); |
| |
| int qla2xuseresexchforels; |
| module_param(qla2xuseresexchforels, int, 0444); |
| MODULE_PARM_DESC(qla2xuseresexchforels, |
| "Reserve 1/2 of emergency exchanges for ELS.\n" |
| " 0 (default): disabled"); |
| |
| static int ql2xprotmask; |
| module_param(ql2xprotmask, int, 0644); |
| MODULE_PARM_DESC(ql2xprotmask, |
| "Override DIF/DIX protection capabilities mask\n" |
| "Default is 0 which sets protection mask based on " |
| "capabilities reported by HBA firmware.\n"); |
| |
| static int ql2xprotguard; |
| module_param(ql2xprotguard, int, 0644); |
| MODULE_PARM_DESC(ql2xprotguard, "Override choice of DIX checksum\n" |
| " 0 -- Let HBA firmware decide\n" |
| " 1 -- Force T10 CRC\n" |
| " 2 -- Force IP checksum\n"); |
| |
| int ql2xdifbundlinginternalbuffers; |
| module_param(ql2xdifbundlinginternalbuffers, int, 0644); |
| MODULE_PARM_DESC(ql2xdifbundlinginternalbuffers, |
| "Force using internal buffers for DIF information\n" |
| "0 (Default). Based on check.\n" |
| "1 Force using internal buffers\n"); |
| |
| static void qla2x00_clear_drv_active(struct qla_hw_data *); |
| static void qla2x00_free_device(scsi_qla_host_t *); |
| static int qla2xxx_map_queues(struct Scsi_Host *shost); |
| static void qla2x00_destroy_deferred_work(struct qla_hw_data *); |
| |
| |
| static struct scsi_transport_template *qla2xxx_transport_template = NULL; |
| struct scsi_transport_template *qla2xxx_transport_vport_template = NULL; |
| |
| /* TODO Convert to inlines |
| * |
| * Timer routines |
| */ |
| |
| __inline__ void |
| qla2x00_start_timer(scsi_qla_host_t *vha, unsigned long interval) |
| { |
| timer_setup(&vha->timer, qla2x00_timer, 0); |
| vha->timer.expires = jiffies + interval * HZ; |
| add_timer(&vha->timer); |
| vha->timer_active = 1; |
| } |
| |
| static inline void |
| qla2x00_restart_timer(scsi_qla_host_t *vha, unsigned long interval) |
| { |
| /* Currently used for 82XX only. */ |
| if (vha->device_flags & DFLG_DEV_FAILED) { |
| ql_dbg(ql_dbg_timer, vha, 0x600d, |
| "Device in a failed state, returning.\n"); |
| return; |
| } |
| |
| mod_timer(&vha->timer, jiffies + interval * HZ); |
| } |
| |
| static __inline__ void |
| qla2x00_stop_timer(scsi_qla_host_t *vha) |
| { |
| del_timer_sync(&vha->timer); |
| vha->timer_active = 0; |
| } |
| |
| static int qla2x00_do_dpc(void *data); |
| |
| static void qla2x00_rst_aen(scsi_qla_host_t *); |
| |
| static int qla2x00_mem_alloc(struct qla_hw_data *, uint16_t, uint16_t, |
| struct req_que **, struct rsp_que **); |
| static void qla2x00_free_fw_dump(struct qla_hw_data *); |
| static void qla2x00_mem_free(struct qla_hw_data *); |
| int qla2xxx_mqueuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd, |
| struct qla_qpair *qpair); |
| |
| /* -------------------------------------------------------------------------- */ |
| static void qla_init_base_qpair(struct scsi_qla_host *vha, struct req_que *req, |
| struct rsp_que *rsp) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| |
| rsp->qpair = ha->base_qpair; |
| rsp->req = req; |
| ha->base_qpair->hw = ha; |
| ha->base_qpair->req = req; |
| ha->base_qpair->rsp = rsp; |
| ha->base_qpair->vha = vha; |
| ha->base_qpair->qp_lock_ptr = &ha->hardware_lock; |
| ha->base_qpair->use_shadow_reg = IS_SHADOW_REG_CAPABLE(ha) ? 1 : 0; |
| ha->base_qpair->msix = &ha->msix_entries[QLA_MSIX_RSP_Q]; |
| ha->base_qpair->srb_mempool = ha->srb_mempool; |
| INIT_LIST_HEAD(&ha->base_qpair->hints_list); |
| ha->base_qpair->enable_class_2 = ql2xenableclass2; |
| /* init qpair to this cpu. Will adjust at run time. */ |
| qla_cpu_update(rsp->qpair, raw_smp_processor_id()); |
| ha->base_qpair->pdev = ha->pdev; |
| |
| if (IS_QLA27XX(ha) || IS_QLA83XX(ha) || IS_QLA28XX(ha)) |
| ha->base_qpair->reqq_start_iocbs = qla_83xx_start_iocbs; |
| } |
| |
| static int qla2x00_alloc_queues(struct qla_hw_data *ha, struct req_que *req, |
| struct rsp_que *rsp) |
| { |
| scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); |
| |
| ha->req_q_map = kcalloc(ha->max_req_queues, sizeof(struct req_que *), |
| GFP_KERNEL); |
| if (!ha->req_q_map) { |
| ql_log(ql_log_fatal, vha, 0x003b, |
| "Unable to allocate memory for request queue ptrs.\n"); |
| goto fail_req_map; |
| } |
| |
| ha->rsp_q_map = kcalloc(ha->max_rsp_queues, sizeof(struct rsp_que *), |
| GFP_KERNEL); |
| if (!ha->rsp_q_map) { |
| ql_log(ql_log_fatal, vha, 0x003c, |
| "Unable to allocate memory for response queue ptrs.\n"); |
| goto fail_rsp_map; |
| } |
| |
| ha->base_qpair = kzalloc(sizeof(struct qla_qpair), GFP_KERNEL); |
| if (ha->base_qpair == NULL) { |
| ql_log(ql_log_warn, vha, 0x00e0, |
| "Failed to allocate base queue pair memory.\n"); |
| goto fail_base_qpair; |
| } |
| |
| qla_init_base_qpair(vha, req, rsp); |
| |
| if ((ql2xmqsupport || ql2xnvmeenable) && ha->max_qpairs) { |
| ha->queue_pair_map = kcalloc(ha->max_qpairs, sizeof(struct qla_qpair *), |
| GFP_KERNEL); |
| if (!ha->queue_pair_map) { |
| ql_log(ql_log_fatal, vha, 0x0180, |
| "Unable to allocate memory for queue pair ptrs.\n"); |
| goto fail_qpair_map; |
| } |
| } |
| |
| /* |
| * Make sure we record at least the request and response queue zero in |
| * case we need to free them if part of the probe fails. |
| */ |
| ha->rsp_q_map[0] = rsp; |
| ha->req_q_map[0] = req; |
| set_bit(0, ha->rsp_qid_map); |
| set_bit(0, ha->req_qid_map); |
| return 0; |
| |
| fail_qpair_map: |
| kfree(ha->base_qpair); |
| ha->base_qpair = NULL; |
| fail_base_qpair: |
| kfree(ha->rsp_q_map); |
| ha->rsp_q_map = NULL; |
| fail_rsp_map: |
| kfree(ha->req_q_map); |
| ha->req_q_map = NULL; |
| fail_req_map: |
| return -ENOMEM; |
| } |
| |
| static void qla2x00_free_req_que(struct qla_hw_data *ha, struct req_que *req) |
| { |
| if (IS_QLAFX00(ha)) { |
| if (req && req->ring_fx00) |
| dma_free_coherent(&ha->pdev->dev, |
| (req->length_fx00 + 1) * sizeof(request_t), |
| req->ring_fx00, req->dma_fx00); |
| } else if (req && req->ring) |
| dma_free_coherent(&ha->pdev->dev, |
| (req->length + 1) * sizeof(request_t), |
| req->ring, req->dma); |
| |
| if (req) |
| kfree(req->outstanding_cmds); |
| |
| kfree(req); |
| } |
| |
| static void qla2x00_free_rsp_que(struct qla_hw_data *ha, struct rsp_que *rsp) |
| { |
| if (IS_QLAFX00(ha)) { |
| if (rsp && rsp->ring_fx00) |
| dma_free_coherent(&ha->pdev->dev, |
| (rsp->length_fx00 + 1) * sizeof(request_t), |
| rsp->ring_fx00, rsp->dma_fx00); |
| } else if (rsp && rsp->ring) { |
| dma_free_coherent(&ha->pdev->dev, |
| (rsp->length + 1) * sizeof(response_t), |
| rsp->ring, rsp->dma); |
| } |
| kfree(rsp); |
| } |
| |
| static void qla2x00_free_queues(struct qla_hw_data *ha) |
| { |
| struct req_que *req; |
| struct rsp_que *rsp; |
| int cnt; |
| unsigned long flags; |
| |
| if (ha->queue_pair_map) { |
| kfree(ha->queue_pair_map); |
| ha->queue_pair_map = NULL; |
| } |
| if (ha->base_qpair) { |
| kfree(ha->base_qpair); |
| ha->base_qpair = NULL; |
| } |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| for (cnt = 0; cnt < ha->max_req_queues; cnt++) { |
| if (!test_bit(cnt, ha->req_qid_map)) |
| continue; |
| |
| req = ha->req_q_map[cnt]; |
| clear_bit(cnt, ha->req_qid_map); |
| ha->req_q_map[cnt] = NULL; |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| qla2x00_free_req_que(ha, req); |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| } |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| kfree(ha->req_q_map); |
| ha->req_q_map = NULL; |
| |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| for (cnt = 0; cnt < ha->max_rsp_queues; cnt++) { |
| if (!test_bit(cnt, ha->rsp_qid_map)) |
| continue; |
| |
| rsp = ha->rsp_q_map[cnt]; |
| clear_bit(cnt, ha->rsp_qid_map); |
| ha->rsp_q_map[cnt] = NULL; |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| qla2x00_free_rsp_que(ha, rsp); |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| } |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| kfree(ha->rsp_q_map); |
| ha->rsp_q_map = NULL; |
| } |
| |
| static char * |
| qla2x00_pci_info_str(struct scsi_qla_host *vha, char *str, size_t str_len) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| static const char *const pci_bus_modes[] = { |
| "33", "66", "100", "133", |
| }; |
| uint16_t pci_bus; |
| |
| pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9; |
| if (pci_bus) { |
| snprintf(str, str_len, "PCI-X (%s MHz)", |
| pci_bus_modes[pci_bus]); |
| } else { |
| pci_bus = (ha->pci_attr & BIT_8) >> 8; |
| snprintf(str, str_len, "PCI (%s MHz)", pci_bus_modes[pci_bus]); |
| } |
| |
| return str; |
| } |
| |
| static char * |
| qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str, size_t str_len) |
| { |
| static const char *const pci_bus_modes[] = { |
| "33", "66", "100", "133", |
| }; |
| struct qla_hw_data *ha = vha->hw; |
| uint32_t pci_bus; |
| |
| if (pci_is_pcie(ha->pdev)) { |
| uint32_t lstat, lspeed, lwidth; |
| const char *speed_str; |
| |
| pcie_capability_read_dword(ha->pdev, PCI_EXP_LNKCAP, &lstat); |
| lspeed = lstat & PCI_EXP_LNKCAP_SLS; |
| lwidth = (lstat & PCI_EXP_LNKCAP_MLW) >> 4; |
| |
| switch (lspeed) { |
| case 1: |
| speed_str = "2.5GT/s"; |
| break; |
| case 2: |
| speed_str = "5.0GT/s"; |
| break; |
| case 3: |
| speed_str = "8.0GT/s"; |
| break; |
| default: |
| speed_str = "<unknown>"; |
| break; |
| } |
| snprintf(str, str_len, "PCIe (%s x%d)", speed_str, lwidth); |
| |
| return str; |
| } |
| |
| pci_bus = (ha->pci_attr & CSRX_PCIX_BUS_MODE_MASK) >> 8; |
| if (pci_bus == 0 || pci_bus == 8) |
| snprintf(str, str_len, "PCI (%s MHz)", |
| pci_bus_modes[pci_bus >> 3]); |
| else |
| snprintf(str, str_len, "PCI-X Mode %d (%s MHz)", |
| pci_bus & 4 ? 2 : 1, |
| pci_bus_modes[pci_bus & 3]); |
| |
| return str; |
| } |
| |
| static char * |
| qla2x00_fw_version_str(struct scsi_qla_host *vha, char *str, size_t size) |
| { |
| char un_str[10]; |
| struct qla_hw_data *ha = vha->hw; |
| |
| snprintf(str, size, "%d.%02d.%02d ", ha->fw_major_version, |
| ha->fw_minor_version, ha->fw_subminor_version); |
| |
| if (ha->fw_attributes & BIT_9) { |
| strcat(str, "FLX"); |
| return (str); |
| } |
| |
| switch (ha->fw_attributes & 0xFF) { |
| case 0x7: |
| strcat(str, "EF"); |
| break; |
| case 0x17: |
| strcat(str, "TP"); |
| break; |
| case 0x37: |
| strcat(str, "IP"); |
| break; |
| case 0x77: |
| strcat(str, "VI"); |
| break; |
| default: |
| sprintf(un_str, "(%x)", ha->fw_attributes); |
| strcat(str, un_str); |
| break; |
| } |
| if (ha->fw_attributes & 0x100) |
| strcat(str, "X"); |
| |
| return (str); |
| } |
| |
| static char * |
| qla24xx_fw_version_str(struct scsi_qla_host *vha, char *str, size_t size) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| |
| snprintf(str, size, "%d.%02d.%02d (%x)", ha->fw_major_version, |
| ha->fw_minor_version, ha->fw_subminor_version, ha->fw_attributes); |
| return str; |
| } |
| |
| void qla2x00_sp_free_dma(srb_t *sp) |
| { |
| struct qla_hw_data *ha = sp->vha->hw; |
| struct scsi_cmnd *cmd = GET_CMD_SP(sp); |
| |
| if (sp->flags & SRB_DMA_VALID) { |
| scsi_dma_unmap(cmd); |
| sp->flags &= ~SRB_DMA_VALID; |
| } |
| |
| if (sp->flags & SRB_CRC_PROT_DMA_VALID) { |
| dma_unmap_sg(&ha->pdev->dev, scsi_prot_sglist(cmd), |
| scsi_prot_sg_count(cmd), cmd->sc_data_direction); |
| sp->flags &= ~SRB_CRC_PROT_DMA_VALID; |
| } |
| |
| if (sp->flags & SRB_CRC_CTX_DSD_VALID) { |
| /* List assured to be having elements */ |
| qla2x00_clean_dsd_pool(ha, sp->u.scmd.crc_ctx); |
| sp->flags &= ~SRB_CRC_CTX_DSD_VALID; |
| } |
| |
| if (sp->flags & SRB_CRC_CTX_DMA_VALID) { |
| struct crc_context *ctx0 = sp->u.scmd.crc_ctx; |
| |
| dma_pool_free(ha->dl_dma_pool, ctx0, ctx0->crc_ctx_dma); |
| sp->flags &= ~SRB_CRC_CTX_DMA_VALID; |
| } |
| |
| if (sp->flags & SRB_FCP_CMND_DMA_VALID) { |
| struct ct6_dsd *ctx1 = sp->u.scmd.ct6_ctx; |
| |
| dma_pool_free(ha->fcp_cmnd_dma_pool, ctx1->fcp_cmnd, |
| ctx1->fcp_cmnd_dma); |
| list_splice(&ctx1->dsd_list, &ha->gbl_dsd_list); |
| ha->gbl_dsd_inuse -= ctx1->dsd_use_cnt; |
| ha->gbl_dsd_avail += ctx1->dsd_use_cnt; |
| mempool_free(ctx1, ha->ctx_mempool); |
| } |
| } |
| |
| void qla2x00_sp_compl(srb_t *sp, int res) |
| { |
| struct scsi_cmnd *cmd = GET_CMD_SP(sp); |
| struct completion *comp = sp->comp; |
| |
| sp->free(sp); |
| cmd->result = res; |
| CMD_SP(cmd) = NULL; |
| cmd->scsi_done(cmd); |
| if (comp) |
| complete(comp); |
| } |
| |
| void qla2xxx_qpair_sp_free_dma(srb_t *sp) |
| { |
| struct scsi_cmnd *cmd = GET_CMD_SP(sp); |
| struct qla_hw_data *ha = sp->fcport->vha->hw; |
| |
| if (sp->flags & SRB_DMA_VALID) { |
| scsi_dma_unmap(cmd); |
| sp->flags &= ~SRB_DMA_VALID; |
| } |
| |
| if (sp->flags & SRB_CRC_PROT_DMA_VALID) { |
| dma_unmap_sg(&ha->pdev->dev, scsi_prot_sglist(cmd), |
| scsi_prot_sg_count(cmd), cmd->sc_data_direction); |
| sp->flags &= ~SRB_CRC_PROT_DMA_VALID; |
| } |
| |
| if (sp->flags & SRB_CRC_CTX_DSD_VALID) { |
| /* List assured to be having elements */ |
| qla2x00_clean_dsd_pool(ha, sp->u.scmd.crc_ctx); |
| sp->flags &= ~SRB_CRC_CTX_DSD_VALID; |
| } |
| |
| if (sp->flags & SRB_DIF_BUNDL_DMA_VALID) { |
| struct crc_context *difctx = sp->u.scmd.crc_ctx; |
| struct dsd_dma *dif_dsd, *nxt_dsd; |
| |
| list_for_each_entry_safe(dif_dsd, nxt_dsd, |
| &difctx->ldif_dma_hndl_list, list) { |
| list_del(&dif_dsd->list); |
| dma_pool_free(ha->dif_bundl_pool, dif_dsd->dsd_addr, |
| dif_dsd->dsd_list_dma); |
| kfree(dif_dsd); |
| difctx->no_dif_bundl--; |
| } |
| |
| list_for_each_entry_safe(dif_dsd, nxt_dsd, |
| &difctx->ldif_dsd_list, list) { |
| list_del(&dif_dsd->list); |
| dma_pool_free(ha->dl_dma_pool, dif_dsd->dsd_addr, |
| dif_dsd->dsd_list_dma); |
| kfree(dif_dsd); |
| difctx->no_ldif_dsd--; |
| } |
| |
| if (difctx->no_ldif_dsd) { |
| ql_dbg(ql_dbg_tgt+ql_dbg_verbose, sp->vha, 0xe022, |
| "%s: difctx->no_ldif_dsd=%x\n", |
| __func__, difctx->no_ldif_dsd); |
| } |
| |
| if (difctx->no_dif_bundl) { |
| ql_dbg(ql_dbg_tgt+ql_dbg_verbose, sp->vha, 0xe022, |
| "%s: difctx->no_dif_bundl=%x\n", |
| __func__, difctx->no_dif_bundl); |
| } |
| sp->flags &= ~SRB_DIF_BUNDL_DMA_VALID; |
| } |
| |
| if (sp->flags & SRB_FCP_CMND_DMA_VALID) { |
| struct ct6_dsd *ctx1 = sp->u.scmd.ct6_ctx; |
| |
| dma_pool_free(ha->fcp_cmnd_dma_pool, ctx1->fcp_cmnd, |
| ctx1->fcp_cmnd_dma); |
| list_splice(&ctx1->dsd_list, &ha->gbl_dsd_list); |
| ha->gbl_dsd_inuse -= ctx1->dsd_use_cnt; |
| ha->gbl_dsd_avail += ctx1->dsd_use_cnt; |
| mempool_free(ctx1, ha->ctx_mempool); |
| sp->flags &= ~SRB_FCP_CMND_DMA_VALID; |
| } |
| |
| if (sp->flags & SRB_CRC_CTX_DMA_VALID) { |
| struct crc_context *ctx0 = sp->u.scmd.crc_ctx; |
| |
| dma_pool_free(ha->dl_dma_pool, ctx0, ctx0->crc_ctx_dma); |
| sp->flags &= ~SRB_CRC_CTX_DMA_VALID; |
| } |
| } |
| |
| void qla2xxx_qpair_sp_compl(srb_t *sp, int res) |
| { |
| struct scsi_cmnd *cmd = GET_CMD_SP(sp); |
| struct completion *comp = sp->comp; |
| |
| sp->free(sp); |
| cmd->result = res; |
| CMD_SP(cmd) = NULL; |
| cmd->scsi_done(cmd); |
| if (comp) |
| complete(comp); |
| } |
| |
| static int |
| qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) |
| { |
| scsi_qla_host_t *vha = shost_priv(host); |
| fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; |
| struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device)); |
| struct qla_hw_data *ha = vha->hw; |
| struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); |
| srb_t *sp; |
| int rval; |
| |
| if (unlikely(test_bit(UNLOADING, &base_vha->dpc_flags)) || |
| WARN_ON_ONCE(!rport)) { |
| cmd->result = DID_NO_CONNECT << 16; |
| goto qc24_fail_command; |
| } |
| |
| if (ha->mqenable) { |
| uint32_t tag; |
| uint16_t hwq; |
| struct qla_qpair *qpair = NULL; |
| |
| tag = blk_mq_unique_tag(cmd->request); |
| hwq = blk_mq_unique_tag_to_hwq(tag); |
| qpair = ha->queue_pair_map[hwq]; |
| |
| if (qpair) |
| return qla2xxx_mqueuecommand(host, cmd, qpair); |
| } |
| |
| if (ha->flags.eeh_busy) { |
| if (ha->flags.pci_channel_io_perm_failure) { |
| ql_dbg(ql_dbg_aer, vha, 0x9010, |
| "PCI Channel IO permanent failure, exiting " |
| "cmd=%p.\n", cmd); |
| cmd->result = DID_NO_CONNECT << 16; |
| } else { |
| ql_dbg(ql_dbg_aer, vha, 0x9011, |
| "EEH_Busy, Requeuing the cmd=%p.\n", cmd); |
| cmd->result = DID_REQUEUE << 16; |
| } |
| goto qc24_fail_command; |
| } |
| |
| rval = fc_remote_port_chkready(rport); |
| if (rval) { |
| cmd->result = rval; |
| ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3003, |
| "fc_remote_port_chkready failed for cmd=%p, rval=0x%x.\n", |
| cmd, rval); |
| goto qc24_fail_command; |
| } |
| |
| if (!vha->flags.difdix_supported && |
| scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) { |
| ql_dbg(ql_dbg_io, vha, 0x3004, |
| "DIF Cap not reg, fail DIF capable cmd's:%p.\n", |
| cmd); |
| cmd->result = DID_NO_CONNECT << 16; |
| goto qc24_fail_command; |
| } |
| |
| if (!fcport) { |
| cmd->result = DID_NO_CONNECT << 16; |
| goto qc24_fail_command; |
| } |
| |
| if (atomic_read(&fcport->state) != FCS_ONLINE) { |
| if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD || |
| atomic_read(&base_vha->loop_state) == LOOP_DEAD) { |
| ql_dbg(ql_dbg_io, vha, 0x3005, |
| "Returning DNC, fcport_state=%d loop_state=%d.\n", |
| atomic_read(&fcport->state), |
| atomic_read(&base_vha->loop_state)); |
| cmd->result = DID_NO_CONNECT << 16; |
| goto qc24_fail_command; |
| } |
| goto qc24_target_busy; |
| } |
| |
| /* |
| * Return target busy if we've received a non-zero retry_delay_timer |
| * in a FCP_RSP. |
| */ |
| if (fcport->retry_delay_timestamp == 0) { |
| /* retry delay not set */ |
| } else if (time_after(jiffies, fcport->retry_delay_timestamp)) |
| fcport->retry_delay_timestamp = 0; |
| else |
| goto qc24_target_busy; |
| |
| sp = scsi_cmd_priv(cmd); |
| qla2xxx_init_sp(sp, vha, vha->hw->base_qpair, fcport); |
| |
| sp->u.scmd.cmd = cmd; |
| sp->type = SRB_SCSI_CMD; |
| |
| CMD_SP(cmd) = (void *)sp; |
| sp->free = qla2x00_sp_free_dma; |
| sp->done = qla2x00_sp_compl; |
| |
| rval = ha->isp_ops->start_scsi(sp); |
| if (rval != QLA_SUCCESS) { |
| ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3013, |
| "Start scsi failed rval=%d for cmd=%p.\n", rval, cmd); |
| goto qc24_host_busy_free_sp; |
| } |
| |
| return 0; |
| |
| qc24_host_busy_free_sp: |
| sp->free(sp); |
| |
| qc24_target_busy: |
| return SCSI_MLQUEUE_TARGET_BUSY; |
| |
| qc24_fail_command: |
| cmd->scsi_done(cmd); |
| |
| return 0; |
| } |
| |
| /* For MQ supported I/O */ |
| int |
| qla2xxx_mqueuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd, |
| struct qla_qpair *qpair) |
| { |
| scsi_qla_host_t *vha = shost_priv(host); |
| fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; |
| struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device)); |
| struct qla_hw_data *ha = vha->hw; |
| struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); |
| srb_t *sp; |
| int rval; |
| |
| rval = rport ? fc_remote_port_chkready(rport) : FC_PORTSTATE_OFFLINE; |
| if (rval) { |
| cmd->result = rval; |
| ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3076, |
| "fc_remote_port_chkready failed for cmd=%p, rval=0x%x.\n", |
| cmd, rval); |
| goto qc24_fail_command; |
| } |
| |
| if (!fcport) { |
| cmd->result = DID_NO_CONNECT << 16; |
| goto qc24_fail_command; |
| } |
| |
| if (atomic_read(&fcport->state) != FCS_ONLINE) { |
| if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD || |
| atomic_read(&base_vha->loop_state) == LOOP_DEAD) { |
| ql_dbg(ql_dbg_io, vha, 0x3077, |
| "Returning DNC, fcport_state=%d loop_state=%d.\n", |
| atomic_read(&fcport->state), |
| atomic_read(&base_vha->loop_state)); |
| cmd->result = DID_NO_CONNECT << 16; |
| goto qc24_fail_command; |
| } |
| goto qc24_target_busy; |
| } |
| |
| /* |
| * Return target busy if we've received a non-zero retry_delay_timer |
| * in a FCP_RSP. |
| */ |
| if (fcport->retry_delay_timestamp == 0) { |
| /* retry delay not set */ |
| } else if (time_after(jiffies, fcport->retry_delay_timestamp)) |
| fcport->retry_delay_timestamp = 0; |
| else |
| goto qc24_target_busy; |
| |
| sp = scsi_cmd_priv(cmd); |
| qla2xxx_init_sp(sp, vha, qpair, fcport); |
| |
| sp->u.scmd.cmd = cmd; |
| sp->type = SRB_SCSI_CMD; |
| CMD_SP(cmd) = (void *)sp; |
| sp->free = qla2xxx_qpair_sp_free_dma; |
| sp->done = qla2xxx_qpair_sp_compl; |
| |
| rval = ha->isp_ops->start_scsi_mq(sp); |
| if (rval != QLA_SUCCESS) { |
| ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3078, |
| "Start scsi failed rval=%d for cmd=%p.\n", rval, cmd); |
| if (rval == QLA_INTERFACE_ERROR) |
| goto qc24_free_sp_fail_command; |
| goto qc24_host_busy_free_sp; |
| } |
| |
| return 0; |
| |
| qc24_host_busy_free_sp: |
| sp->free(sp); |
| |
| qc24_target_busy: |
| return SCSI_MLQUEUE_TARGET_BUSY; |
| |
| qc24_free_sp_fail_command: |
| sp->free(sp); |
| CMD_SP(cmd) = NULL; |
| qla2xxx_rel_qpair_sp(sp->qpair, sp); |
| |
| qc24_fail_command: |
| cmd->scsi_done(cmd); |
| |
| return 0; |
| } |
| |
| /* |
| * qla2x00_eh_wait_on_command |
| * Waits for the command to be returned by the Firmware for some |
| * max time. |
| * |
| * Input: |
| * cmd = Scsi Command to wait on. |
| * |
| * Return: |
| * Completed in time : QLA_SUCCESS |
| * Did not complete in time : QLA_FUNCTION_FAILED |
| */ |
| static int |
| qla2x00_eh_wait_on_command(struct scsi_cmnd *cmd) |
| { |
| #define ABORT_POLLING_PERIOD 1000 |
| #define ABORT_WAIT_ITER ((2 * 1000) / (ABORT_POLLING_PERIOD)) |
| unsigned long wait_iter = ABORT_WAIT_ITER; |
| scsi_qla_host_t *vha = shost_priv(cmd->device->host); |
| struct qla_hw_data *ha = vha->hw; |
| int ret = QLA_SUCCESS; |
| |
| if (unlikely(pci_channel_offline(ha->pdev)) || ha->flags.eeh_busy) { |
| ql_dbg(ql_dbg_taskm, vha, 0x8005, |
| "Return:eh_wait.\n"); |
| return ret; |
| } |
| |
| while (CMD_SP(cmd) && wait_iter--) { |
| msleep(ABORT_POLLING_PERIOD); |
| } |
| if (CMD_SP(cmd)) |
| ret = QLA_FUNCTION_FAILED; |
| |
| return ret; |
| } |
| |
| /* |
| * qla2x00_wait_for_hba_online |
| * Wait till the HBA is online after going through |
| * <= MAX_RETRIES_OF_ISP_ABORT or |
| * finally HBA is disabled ie marked offline |
| * |
| * Input: |
| * ha - pointer to host adapter structure |
| * |
| * Note: |
| * Does context switching-Release SPIN_LOCK |
| * (if any) before calling this routine. |
| * |
| * Return: |
| * Success (Adapter is online) : 0 |
| * Failed (Adapter is offline/disabled) : 1 |
| */ |
| int |
| qla2x00_wait_for_hba_online(scsi_qla_host_t *vha) |
| { |
| int return_status; |
| unsigned long wait_online; |
| struct qla_hw_data *ha = vha->hw; |
| scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); |
| |
| wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ); |
| while (((test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) || |
| test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) || |
| test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) || |
| ha->dpc_active) && time_before(jiffies, wait_online)) { |
| |
| msleep(1000); |
| } |
| if (base_vha->flags.online) |
| return_status = QLA_SUCCESS; |
| else |
| return_status = QLA_FUNCTION_FAILED; |
| |
| return (return_status); |
| } |
| |
| static inline int test_fcport_count(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| unsigned long flags; |
| int res; |
| |
| spin_lock_irqsave(&ha->tgt.sess_lock, flags); |
| ql_dbg(ql_dbg_init, vha, 0x00ec, |
| "tgt %p, fcport_count=%d\n", |
| vha, vha->fcport_count); |
| res = (vha->fcport_count == 0); |
| spin_unlock_irqrestore(&ha->tgt.sess_lock, flags); |
| |
| return res; |
| } |
| |
| /* |
| * qla2x00_wait_for_sess_deletion can only be called from remove_one. |
| * it has dependency on UNLOADING flag to stop device discovery |
| */ |
| void |
| qla2x00_wait_for_sess_deletion(scsi_qla_host_t *vha) |
| { |
| u8 i; |
| |
| qla2x00_mark_all_devices_lost(vha, 0); |
| |
| for (i = 0; i < 10; i++) { |
| if (wait_event_timeout(vha->fcport_waitQ, |
| test_fcport_count(vha), HZ) > 0) |
| break; |
| } |
| |
| flush_workqueue(vha->hw->wq); |
| } |
| |
| /* |
| * qla2x00_wait_for_hba_ready |
| * Wait till the HBA is ready before doing driver unload |
| * |
| * Input: |
| * ha - pointer to host adapter structure |
| * |
| * Note: |
| * Does context switching-Release SPIN_LOCK |
| * (if any) before calling this routine. |
| * |
| */ |
| static void |
| qla2x00_wait_for_hba_ready(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); |
| |
| while ((qla2x00_reset_active(vha) || ha->dpc_active || |
| ha->flags.mbox_busy) || |
| test_bit(FX00_RESET_RECOVERY, &vha->dpc_flags) || |
| test_bit(FX00_TARGET_SCAN, &vha->dpc_flags)) { |
| if (test_bit(UNLOADING, &base_vha->dpc_flags)) |
| break; |
| msleep(1000); |
| } |
| } |
| |
| int |
| qla2x00_wait_for_chip_reset(scsi_qla_host_t *vha) |
| { |
| int return_status; |
| unsigned long wait_reset; |
| struct qla_hw_data *ha = vha->hw; |
| scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); |
| |
| wait_reset = jiffies + (MAX_LOOP_TIMEOUT * HZ); |
| while (((test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) || |
| test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) || |
| test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) || |
| ha->dpc_active) && time_before(jiffies, wait_reset)) { |
| |
| msleep(1000); |
| |
| if (!test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) && |
| ha->flags.chip_reset_done) |
| break; |
| } |
| if (ha->flags.chip_reset_done) |
| return_status = QLA_SUCCESS; |
| else |
| return_status = QLA_FUNCTION_FAILED; |
| |
| return return_status; |
| } |
| |
| #define ISP_REG_DISCONNECT 0xffffffffU |
| /************************************************************************** |
| * qla2x00_isp_reg_stat |
| * |
| * Description: |
| * Read the host status register of ISP before aborting the command. |
| * |
| * Input: |
| * ha = pointer to host adapter structure. |
| * |
| * |
| * Returns: |
| * Either true or false. |
| * |
| * Note: Return true if there is register disconnect. |
| **************************************************************************/ |
| static inline |
| uint32_t qla2x00_isp_reg_stat(struct qla_hw_data *ha) |
| { |
| struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; |
| struct device_reg_82xx __iomem *reg82 = &ha->iobase->isp82; |
| |
| if (IS_P3P_TYPE(ha)) |
| return ((RD_REG_DWORD(®82->host_int)) == ISP_REG_DISCONNECT); |
| else |
| return ((RD_REG_DWORD(®->host_status)) == |
| ISP_REG_DISCONNECT); |
| } |
| |
| /************************************************************************** |
| * qla2xxx_eh_abort |
| * |
| * Description: |
| * The abort function will abort the specified command. |
| * |
| * Input: |
| * cmd = Linux SCSI command packet to be aborted. |
| * |
| * Returns: |
| * Either SUCCESS or FAILED. |
| * |
| * Note: |
| * Only return FAILED if command not returned by firmware. |
| **************************************************************************/ |
| static int |
| qla2xxx_eh_abort(struct scsi_cmnd *cmd) |
| { |
| scsi_qla_host_t *vha = shost_priv(cmd->device->host); |
| DECLARE_COMPLETION_ONSTACK(comp); |
| srb_t *sp; |
| int ret; |
| unsigned int id; |
| uint64_t lun; |
| int rval; |
| struct qla_hw_data *ha = vha->hw; |
| uint32_t ratov_j; |
| struct qla_qpair *qpair; |
| unsigned long flags; |
| |
| if (qla2x00_isp_reg_stat(ha)) { |
| ql_log(ql_log_info, vha, 0x8042, |
| "PCI/Register disconnect, exiting.\n"); |
| return FAILED; |
| } |
| |
| ret = fc_block_scsi_eh(cmd); |
| if (ret != 0) |
| return ret; |
| |
| sp = scsi_cmd_priv(cmd); |
| qpair = sp->qpair; |
| |
| if ((sp->fcport && sp->fcport->deleted) || !qpair) |
| return SUCCESS; |
| |
| spin_lock_irqsave(qpair->qp_lock_ptr, flags); |
| if (sp->completed) { |
| spin_unlock_irqrestore(qpair->qp_lock_ptr, flags); |
| return SUCCESS; |
| } |
| |
| if (sp->abort || sp->aborted) { |
| spin_unlock_irqrestore(qpair->qp_lock_ptr, flags); |
| return FAILED; |
| } |
| |
| sp->abort = 1; |
| sp->comp = ∁ |
| spin_unlock_irqrestore(qpair->qp_lock_ptr, flags); |
| |
| |
| id = cmd->device->id; |
| lun = cmd->device->lun; |
| |
| ql_dbg(ql_dbg_taskm, vha, 0x8002, |
| "Aborting from RISC nexus=%ld:%d:%llu sp=%p cmd=%p handle=%x\n", |
| vha->host_no, id, lun, sp, cmd, sp->handle); |
| |
| /* |
| * Abort will release the original Command/sp from FW. Let the |
| * original command call scsi_done. In return, he will wakeup |
| * this sleeping thread. |
| */ |
| rval = ha->isp_ops->abort_command(sp); |
| |
| ql_dbg(ql_dbg_taskm, vha, 0x8003, |
| "Abort command mbx cmd=%p, rval=%x.\n", cmd, rval); |
| |
| /* Wait for the command completion. */ |
| ratov_j = ha->r_a_tov/10 * 4 * 1000; |
| ratov_j = msecs_to_jiffies(ratov_j); |
| switch (rval) { |
| case QLA_SUCCESS: |
| if (!wait_for_completion_timeout(&comp, ratov_j)) { |
| ql_dbg(ql_dbg_taskm, vha, 0xffff, |
| "%s: Abort wait timer (4 * R_A_TOV[%d]) expired\n", |
| __func__, ha->r_a_tov/10); |
| ret = FAILED; |
| } else { |
| ret = SUCCESS; |
| } |
| break; |
| default: |
| ret = FAILED; |
| break; |
| } |
| |
| sp->comp = NULL; |
| |
| ql_log(ql_log_info, vha, 0x801c, |
| "Abort command issued nexus=%ld:%d:%llu -- %x.\n", |
| vha->host_no, id, lun, ret); |
| |
| return ret; |
| } |
| |
| /* |
| * Returns: QLA_SUCCESS or QLA_FUNCTION_FAILED. |
| */ |
| int |
| qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *vha, unsigned int t, |
| uint64_t l, enum nexus_wait_type type) |
| { |
| int cnt, match, status; |
| unsigned long flags; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req; |
| srb_t *sp; |
| struct scsi_cmnd *cmd; |
| |
| status = QLA_SUCCESS; |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| req = vha->req; |
| for (cnt = 1; status == QLA_SUCCESS && |
| cnt < req->num_outstanding_cmds; cnt++) { |
| sp = req->outstanding_cmds[cnt]; |
| if (!sp) |
| continue; |
| if (sp->type != SRB_SCSI_CMD) |
| continue; |
| if (vha->vp_idx != sp->vha->vp_idx) |
| continue; |
| match = 0; |
| cmd = GET_CMD_SP(sp); |
| switch (type) { |
| case WAIT_HOST: |
| match = 1; |
| break; |
| case WAIT_TARGET: |
| match = cmd->device->id == t; |
| break; |
| case WAIT_LUN: |
| match = (cmd->device->id == t && |
| cmd->device->lun == l); |
| break; |
| } |
| if (!match) |
| continue; |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| status = qla2x00_eh_wait_on_command(cmd); |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| } |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| return status; |
| } |
| |
| static char *reset_errors[] = { |
| "HBA not online", |
| "HBA not ready", |
| "Task management failed", |
| "Waiting for command completions", |
| }; |
| |
| static int |
| __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type, |
| struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, uint64_t, int)) |
| { |
| scsi_qla_host_t *vha = shost_priv(cmd->device->host); |
| fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; |
| int err; |
| |
| if (!fcport) { |
| return FAILED; |
| } |
| |
| err = fc_block_scsi_eh(cmd); |
| if (err != 0) |
| return err; |
| |
| if (fcport->deleted) |
| return SUCCESS; |
| |
| ql_log(ql_log_info, vha, 0x8009, |
| "%s RESET ISSUED nexus=%ld:%d:%llu cmd=%p.\n", name, vha->host_no, |
| cmd->device->id, cmd->device->lun, cmd); |
| |
| err = 0; |
| if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0x800a, |
| "Wait for hba online failed for cmd=%p.\n", cmd); |
| goto eh_reset_failed; |
| } |
| err = 2; |
| if (do_reset(fcport, cmd->device->lun, 1) |
| != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0x800c, |
| "do_reset failed for cmd=%p.\n", cmd); |
| goto eh_reset_failed; |
| } |
| err = 3; |
| if (qla2x00_eh_wait_for_pending_commands(vha, cmd->device->id, |
| cmd->device->lun, type) != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0x800d, |
| "wait for pending cmds failed for cmd=%p.\n", cmd); |
| goto eh_reset_failed; |
| } |
| |
| ql_log(ql_log_info, vha, 0x800e, |
| "%s RESET SUCCEEDED nexus:%ld:%d:%llu cmd=%p.\n", name, |
| vha->host_no, cmd->device->id, cmd->device->lun, cmd); |
| |
| return SUCCESS; |
| |
| eh_reset_failed: |
| ql_log(ql_log_info, vha, 0x800f, |
| "%s RESET FAILED: %s nexus=%ld:%d:%llu cmd=%p.\n", name, |
| reset_errors[err], vha->host_no, cmd->device->id, cmd->device->lun, |
| cmd); |
| return FAILED; |
| } |
| |
| static int |
| qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) |
| { |
| scsi_qla_host_t *vha = shost_priv(cmd->device->host); |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (qla2x00_isp_reg_stat(ha)) { |
| ql_log(ql_log_info, vha, 0x803e, |
| "PCI/Register disconnect, exiting.\n"); |
| return FAILED; |
| } |
| |
| return __qla2xxx_eh_generic_reset("DEVICE", WAIT_LUN, cmd, |
| ha->isp_ops->lun_reset); |
| } |
| |
| static int |
| qla2xxx_eh_target_reset(struct scsi_cmnd *cmd) |
| { |
| scsi_qla_host_t *vha = shost_priv(cmd->device->host); |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (qla2x00_isp_reg_stat(ha)) { |
| ql_log(ql_log_info, vha, 0x803f, |
| "PCI/Register disconnect, exiting.\n"); |
| return FAILED; |
| } |
| |
| return __qla2xxx_eh_generic_reset("TARGET", WAIT_TARGET, cmd, |
| ha->isp_ops->target_reset); |
| } |
| |
| /************************************************************************** |
| * qla2xxx_eh_bus_reset |
| * |
| * Description: |
| * The bus reset function will reset the bus and abort any executing |
| * commands. |
| * |
| * Input: |
| * cmd = Linux SCSI command packet of the command that cause the |
| * bus reset. |
| * |
| * Returns: |
| * SUCCESS/FAILURE (defined as macro in scsi.h). |
| * |
| **************************************************************************/ |
| static int |
| qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd) |
| { |
| scsi_qla_host_t *vha = shost_priv(cmd->device->host); |
| fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; |
| int ret = FAILED; |
| unsigned int id; |
| uint64_t lun; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (qla2x00_isp_reg_stat(ha)) { |
| ql_log(ql_log_info, vha, 0x8040, |
| "PCI/Register disconnect, exiting.\n"); |
| return FAILED; |
| } |
| |
| id = cmd->device->id; |
| lun = cmd->device->lun; |
| |
| if (!fcport) { |
| return ret; |
| } |
| |
| ret = fc_block_scsi_eh(cmd); |
| if (ret != 0) |
| return ret; |
| ret = FAILED; |
| |
| if (qla2x00_chip_is_down(vha)) |
| return ret; |
| |
| ql_log(ql_log_info, vha, 0x8012, |
| "BUS RESET ISSUED nexus=%ld:%d:%llu.\n", vha->host_no, id, lun); |
| |
| if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) { |
| ql_log(ql_log_fatal, vha, 0x8013, |
| "Wait for hba online failed board disabled.\n"); |
| goto eh_bus_reset_done; |
| } |
| |
| if (qla2x00_loop_reset(vha) == QLA_SUCCESS) |
| ret = SUCCESS; |
| |
| if (ret == FAILED) |
| goto eh_bus_reset_done; |
| |
| /* Flush outstanding commands. */ |
| if (qla2x00_eh_wait_for_pending_commands(vha, 0, 0, WAIT_HOST) != |
| QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0x8014, |
| "Wait for pending commands failed.\n"); |
| ret = FAILED; |
| } |
| |
| eh_bus_reset_done: |
| ql_log(ql_log_warn, vha, 0x802b, |
| "BUS RESET %s nexus=%ld:%d:%llu.\n", |
| (ret == FAILED) ? "FAILED" : "SUCCEEDED", vha->host_no, id, lun); |
| |
| return ret; |
| } |
| |
| /************************************************************************** |
| * qla2xxx_eh_host_reset |
| * |
| * Description: |
| * The reset function will reset the Adapter. |
| * |
| * Input: |
| * cmd = Linux SCSI command packet of the command that cause the |
| * adapter reset. |
| * |
| * Returns: |
| * Either SUCCESS or FAILED. |
| * |
| * Note: |
| **************************************************************************/ |
| static int |
| qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) |
| { |
| scsi_qla_host_t *vha = shost_priv(cmd->device->host); |
| struct qla_hw_data *ha = vha->hw; |
| int ret = FAILED; |
| unsigned int id; |
| uint64_t lun; |
| scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); |
| |
| if (qla2x00_isp_reg_stat(ha)) { |
| ql_log(ql_log_info, vha, 0x8041, |
| "PCI/Register disconnect, exiting.\n"); |
| schedule_work(&ha->board_disable); |
| return SUCCESS; |
| } |
| |
| id = cmd->device->id; |
| lun = cmd->device->lun; |
| |
| ql_log(ql_log_info, vha, 0x8018, |
| "ADAPTER RESET ISSUED nexus=%ld:%d:%llu.\n", vha->host_no, id, lun); |
| |
| /* |
| * No point in issuing another reset if one is active. Also do not |
| * attempt a reset if we are updating flash. |
| */ |
| if (qla2x00_reset_active(vha) || ha->optrom_state != QLA_SWAITING) |
| goto eh_host_reset_lock; |
| |
| if (vha != base_vha) { |
| if (qla2x00_vp_abort_isp(vha)) |
| goto eh_host_reset_lock; |
| } else { |
| if (IS_P3P_TYPE(vha->hw)) { |
| if (!qla82xx_fcoe_ctx_reset(vha)) { |
| /* Ctx reset success */ |
| ret = SUCCESS; |
| goto eh_host_reset_lock; |
| } |
| /* fall thru if ctx reset failed */ |
| } |
| if (ha->wq) |
| flush_workqueue(ha->wq); |
| |
| set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); |
| if (ha->isp_ops->abort_isp(base_vha)) { |
| clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); |
| /* failed. schedule dpc to try */ |
| set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags); |
| |
| if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0x802a, |
| "wait for hba online failed.\n"); |
| goto eh_host_reset_lock; |
| } |
| } |
| clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); |
| } |
| |
| /* Waiting for command to be returned to OS.*/ |
| if (qla2x00_eh_wait_for_pending_commands(vha, 0, 0, WAIT_HOST) == |
| QLA_SUCCESS) |
| ret = SUCCESS; |
| |
| eh_host_reset_lock: |
| ql_log(ql_log_info, vha, 0x8017, |
| "ADAPTER RESET %s nexus=%ld:%d:%llu.\n", |
| (ret == FAILED) ? "FAILED" : "SUCCEEDED", vha->host_no, id, lun); |
| |
| return ret; |
| } |
| |
| /* |
| * qla2x00_loop_reset |
| * Issue loop reset. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * |
| * Returns: |
| * 0 = success |
| */ |
| int |
| qla2x00_loop_reset(scsi_qla_host_t *vha) |
| { |
| int ret; |
| struct fc_port *fcport; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (IS_QLAFX00(ha)) { |
| return qlafx00_loop_reset(vha); |
| } |
| |
| if (ql2xtargetreset == 1 && ha->flags.enable_target_reset) { |
| list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| if (fcport->port_type != FCT_TARGET) |
| continue; |
| |
| ret = ha->isp_ops->target_reset(fcport, 0, 0); |
| if (ret != QLA_SUCCESS) { |
| ql_dbg(ql_dbg_taskm, vha, 0x802c, |
| "Bus Reset failed: Reset=%d " |
| "d_id=%x.\n", ret, fcport->d_id.b24); |
| } |
| } |
| } |
| |
| |
| if (ha->flags.enable_lip_full_login && !IS_CNA_CAPABLE(ha)) { |
| atomic_set(&vha->loop_state, LOOP_DOWN); |
| atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); |
| qla2x00_mark_all_devices_lost(vha, 0); |
| ret = qla2x00_full_login_lip(vha); |
| if (ret != QLA_SUCCESS) { |
| ql_dbg(ql_dbg_taskm, vha, 0x802d, |
| "full_login_lip=%d.\n", ret); |
| } |
| } |
| |
| if (ha->flags.enable_lip_reset) { |
| ret = qla2x00_lip_reset(vha); |
| if (ret != QLA_SUCCESS) |
| ql_dbg(ql_dbg_taskm, vha, 0x802e, |
| "lip_reset failed (%d).\n", ret); |
| } |
| |
| /* Issue marker command only when we are going to start the I/O */ |
| vha->marker_needed = 1; |
| |
| return QLA_SUCCESS; |
| } |
| |
| static void qla2x00_abort_srb(struct qla_qpair *qp, srb_t *sp, const int res, |
| unsigned long *flags) |
| __releases(qp->qp_lock_ptr) |
| __acquires(qp->qp_lock_ptr) |
| { |
| DECLARE_COMPLETION_ONSTACK(comp); |
| scsi_qla_host_t *vha = qp->vha; |
| struct qla_hw_data *ha = vha->hw; |
| int rval; |
| bool ret_cmd; |
| uint32_t ratov_j; |
| |
| if (qla2x00_chip_is_down(vha)) { |
| sp->done(sp, res); |
| return; |
| } |
| |
| if (sp->type == SRB_NVME_CMD || sp->type == SRB_NVME_LS || |
| (sp->type == SRB_SCSI_CMD && !ha->flags.eeh_busy && |
| !test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) && |
| !qla2x00_isp_reg_stat(ha))) { |
| if (sp->comp) { |
| sp->done(sp, res); |
| return; |
| } |
| |
| sp->comp = ∁ |
| sp->abort = 1; |
| spin_unlock_irqrestore(qp->qp_lock_ptr, *flags); |
| |
| rval = ha->isp_ops->abort_command(sp); |
| /* Wait for command completion. */ |
| ret_cmd = false; |
| ratov_j = ha->r_a_tov/10 * 4 * 1000; |
| ratov_j = msecs_to_jiffies(ratov_j); |
| switch (rval) { |
| case QLA_SUCCESS: |
| if (wait_for_completion_timeout(&comp, ratov_j)) { |
| ql_dbg(ql_dbg_taskm, vha, 0xffff, |
| "%s: Abort wait timer (4 * R_A_TOV[%d]) expired\n", |
| __func__, ha->r_a_tov/10); |
| ret_cmd = true; |
| } |
| /* else FW return SP to driver */ |
| break; |
| default: |
| ret_cmd = true; |
| break; |
| } |
| |
| spin_lock_irqsave(qp->qp_lock_ptr, *flags); |
| if (ret_cmd && (!sp->completed || !sp->aborted)) |
| sp->done(sp, res); |
| } else { |
| sp->done(sp, res); |
| } |
| } |
| |
| static void |
| __qla2x00_abort_all_cmds(struct qla_qpair *qp, int res) |
| { |
| int cnt; |
| unsigned long flags; |
| srb_t *sp; |
| scsi_qla_host_t *vha = qp->vha; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req; |
| struct qla_tgt *tgt = vha->vha_tgt.qla_tgt; |
| struct qla_tgt_cmd *cmd; |
| |
| if (!ha->req_q_map) |
| return; |
| spin_lock_irqsave(qp->qp_lock_ptr, flags); |
| req = qp->req; |
| for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) { |
| sp = req->outstanding_cmds[cnt]; |
| if (sp) { |
| switch (sp->cmd_type) { |
| case TYPE_SRB: |
| qla2x00_abort_srb(qp, sp, res, &flags); |
| break; |
| case TYPE_TGT_CMD: |
| if (!vha->hw->tgt.tgt_ops || !tgt || |
| qla_ini_mode_enabled(vha)) { |
| ql_dbg(ql_dbg_tgt_mgt, vha, 0xf003, |
| "HOST-ABORT-HNDLR: dpc_flags=%lx. Target mode disabled\n", |
| vha->dpc_flags); |
| continue; |
| } |
| cmd = (struct qla_tgt_cmd *)sp; |
| cmd->aborted = 1; |
| break; |
| case TYPE_TGT_TMCMD: |
| /* Skip task management functions. */ |
| break; |
| default: |
| break; |
| } |
| req->outstanding_cmds[cnt] = NULL; |
| } |
| } |
| spin_unlock_irqrestore(qp->qp_lock_ptr, flags); |
| } |
| |
| void |
| qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) |
| { |
| int que; |
| struct qla_hw_data *ha = vha->hw; |
| |
| /* Continue only if initialization complete. */ |
| if (!ha->base_qpair) |
| return; |
| __qla2x00_abort_all_cmds(ha->base_qpair, res); |
| |
| if (!ha->queue_pair_map) |
| return; |
| for (que = 0; que < ha->max_qpairs; que++) { |
| if (!ha->queue_pair_map[que]) |
| continue; |
| |
| __qla2x00_abort_all_cmds(ha->queue_pair_map[que], res); |
| } |
| } |
| |
| static int |
| qla2xxx_slave_alloc(struct scsi_device *sdev) |
| { |
| struct fc_rport *rport = starget_to_rport(scsi_target(sdev)); |
| |
| if (!rport || fc_remote_port_chkready(rport)) |
| return -ENXIO; |
| |
| sdev->hostdata = *(fc_port_t **)rport->dd_data; |
| |
| return 0; |
| } |
| |
| static int |
| qla2xxx_slave_configure(struct scsi_device *sdev) |
| { |
| scsi_qla_host_t *vha = shost_priv(sdev->host); |
| struct req_que *req = vha->req; |
| |
| if (IS_T10_PI_CAPABLE(vha->hw)) |
| blk_queue_update_dma_alignment(sdev->request_queue, 0x7); |
| |
| scsi_change_queue_depth(sdev, req->max_q_depth); |
| return 0; |
| } |
| |
| static void |
| qla2xxx_slave_destroy(struct scsi_device *sdev) |
| { |
| sdev->hostdata = NULL; |
| } |
| |
| /** |
| * qla2x00_config_dma_addressing() - Configure OS DMA addressing method. |
| * @ha: HA context |
| * |
| * At exit, the @ha's flags.enable_64bit_addressing set to indicated |
| * supported addressing method. |
| */ |
| static void |
| qla2x00_config_dma_addressing(struct qla_hw_data *ha) |
| { |
| /* Assume a 32bit DMA mask. */ |
| ha->flags.enable_64bit_addressing = 0; |
| |
| if (!dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(64))) { |
| /* Any upper-dword bits set? */ |
| if (MSD(dma_get_required_mask(&ha->pdev->dev)) && |
| !pci_set_consistent_dma_mask(ha->pdev, DMA_BIT_MASK(64))) { |
| /* Ok, a 64bit DMA mask is applicable. */ |
| ha->flags.enable_64bit_addressing = 1; |
| ha->isp_ops->calc_req_entries = qla2x00_calc_iocbs_64; |
| ha->isp_ops->build_iocbs = qla2x00_build_scsi_iocbs_64; |
| return; |
| } |
| } |
| |
| dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(32)); |
| pci_set_consistent_dma_mask(ha->pdev, DMA_BIT_MASK(32)); |
| } |
| |
| static void |
| qla2x00_enable_intrs(struct qla_hw_data *ha) |
| { |
| unsigned long flags = 0; |
| struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| ha->interrupts_on = 1; |
| /* enable risc and host interrupts */ |
| WRT_REG_WORD(®->ictrl, ICR_EN_INT | ICR_EN_RISC); |
| RD_REG_WORD(®->ictrl); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| } |
| |
| static void |
| qla2x00_disable_intrs(struct qla_hw_data *ha) |
| { |
| unsigned long flags = 0; |
| struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| ha->interrupts_on = 0; |
| /* disable risc and host interrupts */ |
| WRT_REG_WORD(®->ictrl, 0); |
| RD_REG_WORD(®->ictrl); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| } |
| |
| static void |
| qla24xx_enable_intrs(struct qla_hw_data *ha) |
| { |
| unsigned long flags = 0; |
| struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| ha->interrupts_on = 1; |
| WRT_REG_DWORD(®->ictrl, ICRX_EN_RISC_INT); |
| RD_REG_DWORD(®->ictrl); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| } |
| |
| static void |
| qla24xx_disable_intrs(struct qla_hw_data *ha) |
| { |
| unsigned long flags = 0; |
| struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; |
| |
| if (IS_NOPOLLING_TYPE(ha)) |
| return; |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| ha->interrupts_on = 0; |
| WRT_REG_DWORD(®->ictrl, 0); |
| RD_REG_DWORD(®->ictrl); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| } |
| |
| static int |
| qla2x00_iospace_config(struct qla_hw_data *ha) |
| { |
| resource_size_t pio; |
| uint16_t msix; |
| |
| if (pci_request_selected_regions(ha->pdev, ha->bars, |
| QLA2XXX_DRIVER_NAME)) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0x0011, |
| "Failed to reserve PIO/MMIO regions (%s), aborting.\n", |
| pci_name(ha->pdev)); |
| goto iospace_error_exit; |
| } |
| if (!(ha->bars & 1)) |
| goto skip_pio; |
| |
| /* We only need PIO for Flash operations on ISP2312 v2 chips. */ |
| pio = pci_resource_start(ha->pdev, 0); |
| if (pci_resource_flags(ha->pdev, 0) & IORESOURCE_IO) { |
| if (pci_resource_len(ha->pdev, 0) < MIN_IOBASE_LEN) { |
| ql_log_pci(ql_log_warn, ha->pdev, 0x0012, |
| "Invalid pci I/O region size (%s).\n", |
| pci_name(ha->pdev)); |
| pio = 0; |
| } |
| } else { |
| ql_log_pci(ql_log_warn, ha->pdev, 0x0013, |
| "Region #0 no a PIO resource (%s).\n", |
| pci_name(ha->pdev)); |
| pio = 0; |
| } |
| ha->pio_address = pio; |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0014, |
| "PIO address=%llu.\n", |
| (unsigned long long)ha->pio_address); |
| |
| skip_pio: |
| /* Use MMIO operations for all accesses. */ |
| if (!(pci_resource_flags(ha->pdev, 1) & IORESOURCE_MEM)) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0x0015, |
| "Region #1 not an MMIO resource (%s), aborting.\n", |
| pci_name(ha->pdev)); |
| goto iospace_error_exit; |
| } |
| if (pci_resource_len(ha->pdev, 1) < MIN_IOBASE_LEN) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0x0016, |
| "Invalid PCI mem region size (%s), aborting.\n", |
| pci_name(ha->pdev)); |
| goto iospace_error_exit; |
| } |
| |
| ha->iobase = ioremap(pci_resource_start(ha->pdev, 1), MIN_IOBASE_LEN); |
| if (!ha->iobase) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0x0017, |
| "Cannot remap MMIO (%s), aborting.\n", |
| pci_name(ha->pdev)); |
| goto iospace_error_exit; |
| } |
| |
| /* Determine queue resources */ |
| ha->max_req_queues = ha->max_rsp_queues = 1; |
| ha->msix_count = QLA_BASE_VECTORS; |
| if (!ql2xmqsupport || !ql2xnvmeenable || |
| (!IS_QLA25XX(ha) && !IS_QLA81XX(ha))) |
| goto mqiobase_exit; |
| |
| ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3), |
| pci_resource_len(ha->pdev, 3)); |
| if (ha->mqiobase) { |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0018, |
| "MQIO Base=%p.\n", ha->mqiobase); |
| /* Read MSIX vector size of the board */ |
| pci_read_config_word(ha->pdev, QLA_PCI_MSIX_CONTROL, &msix); |
| ha->msix_count = msix + 1; |
| /* Max queues are bounded by available msix vectors */ |
| /* MB interrupt uses 1 vector */ |
| ha->max_req_queues = ha->msix_count - 1; |
| ha->max_rsp_queues = ha->max_req_queues; |
| /* Queue pairs is the max value minus the base queue pair */ |
| ha->max_qpairs = ha->max_rsp_queues - 1; |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0188, |
| "Max no of queues pairs: %d.\n", ha->max_qpairs); |
| |
| ql_log_pci(ql_log_info, ha->pdev, 0x001a, |
| "MSI-X vector count: %d.\n", ha->msix_count); |
| } else |
| ql_log_pci(ql_log_info, ha->pdev, 0x001b, |
| "BAR 3 not enabled.\n"); |
| |
| mqiobase_exit: |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x001c, |
| "MSIX Count: %d.\n", ha->msix_count); |
| return (0); |
| |
| iospace_error_exit: |
| return (-ENOMEM); |
| } |
| |
| |
| static int |
| qla83xx_iospace_config(struct qla_hw_data *ha) |
| { |
| uint16_t msix; |
| |
| if (pci_request_selected_regions(ha->pdev, ha->bars, |
| QLA2XXX_DRIVER_NAME)) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0x0117, |
| "Failed to reserve PIO/MMIO regions (%s), aborting.\n", |
| pci_name(ha->pdev)); |
| |
| goto iospace_error_exit; |
| } |
| |
| /* Use MMIO operations for all accesses. */ |
| if (!(pci_resource_flags(ha->pdev, 0) & IORESOURCE_MEM)) { |
| ql_log_pci(ql_log_warn, ha->pdev, 0x0118, |
| "Invalid pci I/O region size (%s).\n", |
| pci_name(ha->pdev)); |
| goto iospace_error_exit; |
| } |
| if (pci_resource_len(ha->pdev, 0) < MIN_IOBASE_LEN) { |
| ql_log_pci(ql_log_warn, ha->pdev, 0x0119, |
| "Invalid PCI mem region size (%s), aborting\n", |
| pci_name(ha->pdev)); |
| goto iospace_error_exit; |
| } |
| |
| ha->iobase = ioremap(pci_resource_start(ha->pdev, 0), MIN_IOBASE_LEN); |
| if (!ha->iobase) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0x011a, |
| "Cannot remap MMIO (%s), aborting.\n", |
| pci_name(ha->pdev)); |
| goto iospace_error_exit; |
| } |
| |
| /* 64bit PCI BAR - BAR2 will correspoond to region 4 */ |
| /* 83XX 26XX always use MQ type access for queues |
| * - mbar 2, a.k.a region 4 */ |
| ha->max_req_queues = ha->max_rsp_queues = 1; |
| ha->msix_count = QLA_BASE_VECTORS; |
| ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 4), |
| pci_resource_len(ha->pdev, 4)); |
| |
| if (!ha->mqiobase) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0x011d, |
| "BAR2/region4 not enabled\n"); |
| goto mqiobase_exit; |
| } |
| |
| ha->msixbase = ioremap(pci_resource_start(ha->pdev, 2), |
| pci_resource_len(ha->pdev, 2)); |
| if (ha->msixbase) { |
| /* Read MSIX vector size of the board */ |
| pci_read_config_word(ha->pdev, |
| QLA_83XX_PCI_MSIX_CONTROL, &msix); |
| ha->msix_count = (msix & PCI_MSIX_FLAGS_QSIZE) + 1; |
| /* |
| * By default, driver uses at least two msix vectors |
| * (default & rspq) |
| */ |
| if (ql2xmqsupport || ql2xnvmeenable) { |
| /* MB interrupt uses 1 vector */ |
| ha->max_req_queues = ha->msix_count - 1; |
| |
| /* ATIOQ needs 1 vector. That's 1 less QPair */ |
| if (QLA_TGT_MODE_ENABLED()) |
| ha->max_req_queues--; |
| |
| ha->max_rsp_queues = ha->max_req_queues; |
| |
| /* Queue pairs is the max value minus |
| * the base queue pair */ |
| ha->max_qpairs = ha->max_req_queues - 1; |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x00e3, |
| "Max no of queues pairs: %d.\n", ha->max_qpairs); |
| } |
| ql_log_pci(ql_log_info, ha->pdev, 0x011c, |
| "MSI-X vector count: %d.\n", ha->msix_count); |
| } else |
| ql_log_pci(ql_log_info, ha->pdev, 0x011e, |
| "BAR 1 not enabled.\n"); |
| |
| mqiobase_exit: |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x011f, |
| "MSIX Count: %d.\n", ha->msix_count); |
| return 0; |
| |
| iospace_error_exit: |
| return -ENOMEM; |
| } |
| |
| static struct isp_operations qla2100_isp_ops = { |
| .pci_config = qla2100_pci_config, |
| .reset_chip = qla2x00_reset_chip, |
| .chip_diag = qla2x00_chip_diag, |
| .config_rings = qla2x00_config_rings, |
| .reset_adapter = qla2x00_reset_adapter, |
| .nvram_config = qla2x00_nvram_config, |
| .update_fw_options = qla2x00_update_fw_options, |
| .load_risc = qla2x00_load_risc, |
| .pci_info_str = qla2x00_pci_info_str, |
| .fw_version_str = qla2x00_fw_version_str, |
| .intr_handler = qla2100_intr_handler, |
| .enable_intrs = qla2x00_enable_intrs, |
| .disable_intrs = qla2x00_disable_intrs, |
| .abort_command = qla2x00_abort_command, |
| .target_reset = qla2x00_abort_target, |
| .lun_reset = qla2x00_lun_reset, |
| .fabric_login = qla2x00_login_fabric, |
| .fabric_logout = qla2x00_fabric_logout, |
| .calc_req_entries = qla2x00_calc_iocbs_32, |
| .build_iocbs = qla2x00_build_scsi_iocbs_32, |
| .prep_ms_iocb = qla2x00_prep_ms_iocb, |
| .prep_ms_fdmi_iocb = qla2x00_prep_ms_fdmi_iocb, |
| .read_nvram = qla2x00_read_nvram_data, |
| .write_nvram = qla2x00_write_nvram_data, |
| .fw_dump = qla2100_fw_dump, |
| .beacon_on = NULL, |
| .beacon_off = NULL, |
| .beacon_blink = NULL, |
| .read_optrom = qla2x00_read_optrom_data, |
| .write_optrom = qla2x00_write_optrom_data, |
| .get_flash_version = qla2x00_get_flash_version, |
| .start_scsi = qla2x00_start_scsi, |
| .start_scsi_mq = NULL, |
| .abort_isp = qla2x00_abort_isp, |
| .iospace_config = qla2x00_iospace_config, |
| .initialize_adapter = qla2x00_initialize_adapter, |
| }; |
| |
| static struct isp_operations qla2300_isp_ops = { |
| .pci_config = qla2300_pci_config, |
| .reset_chip = qla2x00_reset_chip, |
| .chip_diag = qla2x00_chip_diag, |
| .config_rings = qla2x00_config_rings, |
| .reset_adapter = qla2x00_reset_adapter, |
| .nvram_config = qla2x00_nvram_config, |
| .update_fw_options = qla2x00_update_fw_options, |
| .load_risc = qla2x00_load_risc, |
| .pci_info_str = qla2x00_pci_info_str, |
| .fw_version_str = qla2x00_fw_version_str, |
| .intr_handler = qla2300_intr_handler, |
| .enable_intrs = qla2x00_enable_intrs, |
| .disable_intrs = qla2x00_disable_intrs, |
| .abort_command = qla2x00_abort_command, |
| .target_reset = qla2x00_abort_target, |
| .lun_reset = qla2x00_lun_reset, |
| .fabric_login = qla2x00_login_fabric, |
| .fabric_logout = qla2x00_fabric_logout, |
| .calc_req_entries = qla2x00_calc_iocbs_32, |
| .build_iocbs = qla2x00_build_scsi_iocbs_32, |
| .prep_ms_iocb = qla2x00_prep_ms_iocb, |
| .prep_ms_fdmi_iocb = qla2x00_prep_ms_fdmi_iocb, |
| .read_nvram = qla2x00_read_nvram_data, |
| .write_nvram = qla2x00_write_nvram_data, |
| .fw_dump = qla2300_fw_dump, |
| .beacon_on = qla2x00_beacon_on, |
| .beacon_off = qla2x00_beacon_off, |
| .beacon_blink = qla2x00_beacon_blink, |
| .read_optrom = qla2x00_read_optrom_data, |
| .write_optrom = qla2x00_write_optrom_data, |
| .get_flash_version = qla2x00_get_flash_version, |
| .start_scsi = qla2x00_start_scsi, |
| .start_scsi_mq = NULL, |
| .abort_isp = qla2x00_abort_isp, |
| .iospace_config = qla2x00_iospace_config, |
| .initialize_adapter = qla2x00_initialize_adapter, |
| }; |
| |
| static struct isp_operations qla24xx_isp_ops = { |
| .pci_config = qla24xx_pci_config, |
| .reset_chip = qla24xx_reset_chip, |
| .chip_diag = qla24xx_chip_diag, |
| .config_rings = qla24xx_config_rings, |
| .reset_adapter = qla24xx_reset_adapter, |
| .nvram_config = qla24xx_nvram_config, |
| .update_fw_options = qla24xx_update_fw_options, |
| .load_risc = qla24xx_load_risc, |
| .pci_info_str = qla24xx_pci_info_str, |
| .fw_version_str = qla24xx_fw_version_str, |
| .intr_handler = qla24xx_intr_handler, |
| .enable_intrs = qla24xx_enable_intrs, |
| .disable_intrs = qla24xx_disable_intrs, |
| .abort_command = qla24xx_abort_command, |
| .target_reset = qla24xx_abort_target, |
| .lun_reset = qla24xx_lun_reset, |
| .fabric_login = qla24xx_login_fabric, |
| .fabric_logout = qla24xx_fabric_logout, |
| .calc_req_entries = NULL, |
| .build_iocbs = NULL, |
| .prep_ms_iocb = qla24xx_prep_ms_iocb, |
| .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb, |
| .read_nvram = qla24xx_read_nvram_data, |
| .write_nvram = qla24xx_write_nvram_data, |
| .fw_dump = qla24xx_fw_dump, |
| .beacon_on = qla24xx_beacon_on, |
| .beacon_off = qla24xx_beacon_off, |
| .beacon_blink = qla24xx_beacon_blink, |
| .read_optrom = qla24xx_read_optrom_data, |
| .write_optrom = qla24xx_write_optrom_data, |
| .get_flash_version = qla24xx_get_flash_version, |
| .start_scsi = qla24xx_start_scsi, |
| .start_scsi_mq = NULL, |
| .abort_isp = qla2x00_abort_isp, |
| .iospace_config = qla2x00_iospace_config, |
| .initialize_adapter = qla2x00_initialize_adapter, |
| }; |
| |
| static struct isp_operations qla25xx_isp_ops = { |
| .pci_config = qla25xx_pci_config, |
| .reset_chip = qla24xx_reset_chip, |
| .chip_diag = qla24xx_chip_diag, |
| .config_rings = qla24xx_config_rings, |
| .reset_adapter = qla24xx_reset_adapter, |
| .nvram_config = qla24xx_nvram_config, |
| .update_fw_options = qla24xx_update_fw_options, |
| .load_risc = qla24xx_load_risc, |
| .pci_info_str = qla24xx_pci_info_str, |
| .fw_version_str = qla24xx_fw_version_str, |
| .intr_handler = qla24xx_intr_handler, |
| .enable_intrs = qla24xx_enable_intrs, |
| .disable_intrs = qla24xx_disable_intrs, |
| .abort_command = qla24xx_abort_command, |
| .target_reset = qla24xx_abort_target, |
| .lun_reset = qla24xx_lun_reset, |
| .fabric_login = qla24xx_login_fabric, |
| .fabric_logout = qla24xx_fabric_logout, |
| .calc_req_entries = NULL, |
| .build_iocbs = NULL, |
| .prep_ms_iocb = qla24xx_prep_ms_iocb, |
| .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb, |
| .read_nvram = qla25xx_read_nvram_data, |
| .write_nvram = qla25xx_write_nvram_data, |
| .fw_dump = qla25xx_fw_dump, |
| .beacon_on = qla24xx_beacon_on, |
| .beacon_off = qla24xx_beacon_off, |
| .beacon_blink = qla24xx_beacon_blink, |
| .read_optrom = qla25xx_read_optrom_data, |
| .write_optrom = qla24xx_write_optrom_data, |
| .get_flash_version = qla24xx_get_flash_version, |
| .start_scsi = qla24xx_dif_start_scsi, |
| .start_scsi_mq = qla2xxx_dif_start_scsi_mq, |
| .abort_isp = qla2x00_abort_isp, |
| .iospace_config = qla2x00_iospace_config, |
| .initialize_adapter = qla2x00_initialize_adapter, |
| }; |
| |
| static struct isp_operations qla81xx_isp_ops = { |
| .pci_config = qla25xx_pci_config, |
| .reset_chip = qla24xx_reset_chip, |
| .chip_diag = qla24xx_chip_diag, |
| .config_rings = qla24xx_config_rings, |
| .reset_adapter = qla24xx_reset_adapter, |
| .nvram_config = qla81xx_nvram_config, |
| .update_fw_options = qla81xx_update_fw_options, |
| .load_risc = qla81xx_load_risc, |
| .pci_info_str = qla24xx_pci_info_str, |
| .fw_version_str = qla24xx_fw_version_str, |
| .intr_handler = qla24xx_intr_handler, |
| .enable_intrs = qla24xx_enable_intrs, |
| .disable_intrs = qla24xx_disable_intrs, |
| .abort_command = qla24xx_abort_command, |
| .target_reset = qla24xx_abort_target, |
| .lun_reset = qla24xx_lun_reset, |
| .fabric_login = qla24xx_login_fabric, |
| .fabric_logout = qla24xx_fabric_logout, |
| .calc_req_entries = NULL, |
| .build_iocbs = NULL, |
| .prep_ms_iocb = qla24xx_prep_ms_iocb, |
| .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb, |
| .read_nvram = NULL, |
| .write_nvram = NULL, |
| .fw_dump = qla81xx_fw_dump, |
| .beacon_on = qla24xx_beacon_on, |
| .beacon_off = qla24xx_beacon_off, |
| .beacon_blink = qla83xx_beacon_blink, |
| .read_optrom = qla25xx_read_optrom_data, |
| .write_optrom = qla24xx_write_optrom_data, |
| .get_flash_version = qla24xx_get_flash_version, |
| .start_scsi = qla24xx_dif_start_scsi, |
| .start_scsi_mq = qla2xxx_dif_start_scsi_mq, |
| .abort_isp = qla2x00_abort_isp, |
| .iospace_config = qla2x00_iospace_config, |
| .initialize_adapter = qla2x00_initialize_adapter, |
| }; |
| |
| static struct isp_operations qla82xx_isp_ops = { |
| .pci_config = qla82xx_pci_config, |
| .reset_chip = qla82xx_reset_chip, |
| .chip_diag = qla24xx_chip_diag, |
| .config_rings = qla82xx_config_rings, |
| .reset_adapter = qla24xx_reset_adapter, |
| .nvram_config = qla81xx_nvram_config, |
| .update_fw_options = qla24xx_update_fw_options, |
| .load_risc = qla82xx_load_risc, |
| .pci_info_str = qla24xx_pci_info_str, |
| .fw_version_str = qla24xx_fw_version_str, |
| .intr_handler = qla82xx_intr_handler, |
| .enable_intrs = qla82xx_enable_intrs, |
| .disable_intrs = qla82xx_disable_intrs, |
| .abort_command = qla24xx_abort_command, |
| .target_reset = qla24xx_abort_target, |
| .lun_reset = qla24xx_lun_reset, |
| .fabric_login = qla24xx_login_fabric, |
| .fabric_logout = qla24xx_fabric_logout, |
| .calc_req_entries = NULL, |
| .build_iocbs = NULL, |
| .prep_ms_iocb = qla24xx_prep_ms_iocb, |
| .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb, |
| .read_nvram = qla24xx_read_nvram_data, |
| .write_nvram = qla24xx_write_nvram_data, |
| .fw_dump = qla82xx_fw_dump, |
| .beacon_on = qla82xx_beacon_on, |
| .beacon_off = qla82xx_beacon_off, |
| .beacon_blink = NULL, |
| .read_optrom = qla82xx_read_optrom_data, |
| .write_optrom = qla82xx_write_optrom_data, |
| .get_flash_version = qla82xx_get_flash_version, |
| .start_scsi = qla82xx_start_scsi, |
| .start_scsi_mq = NULL, |
| .abort_isp = qla82xx_abort_isp, |
| .iospace_config = qla82xx_iospace_config, |
| .initialize_adapter = qla2x00_initialize_adapter, |
| }; |
| |
| static struct isp_operations qla8044_isp_ops = { |
| .pci_config = qla82xx_pci_config, |
| .reset_chip = qla82xx_reset_chip, |
| .chip_diag = qla24xx_chip_diag, |
| .config_rings = qla82xx_config_rings, |
| .reset_adapter = qla24xx_reset_adapter, |
| .nvram_config = qla81xx_nvram_config, |
| .update_fw_options = qla24xx_update_fw_options, |
| .load_risc = qla82xx_load_risc, |
| .pci_info_str = qla24xx_pci_info_str, |
| .fw_version_str = qla24xx_fw_version_str, |
| .intr_handler = qla8044_intr_handler, |
| .enable_intrs = qla82xx_enable_intrs, |
| .disable_intrs = qla82xx_disable_intrs, |
| .abort_command = qla24xx_abort_command, |
| .target_reset = qla24xx_abort_target, |
| .lun_reset = qla24xx_lun_reset, |
| .fabric_login = qla24xx_login_fabric, |
| .fabric_logout = qla24xx_fabric_logout, |
| .calc_req_entries = NULL, |
| .build_iocbs = NULL, |
| .prep_ms_iocb = qla24xx_prep_ms_iocb, |
| .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb, |
| .read_nvram = NULL, |
| .write_nvram = NULL, |
| .fw_dump = qla8044_fw_dump, |
| .beacon_on = qla82xx_beacon_on, |
| .beacon_off = qla82xx_beacon_off, |
| .beacon_blink = NULL, |
| .read_optrom = qla8044_read_optrom_data, |
| .write_optrom = qla8044_write_optrom_data, |
| .get_flash_version = qla82xx_get_flash_version, |
| .start_scsi = qla82xx_start_scsi, |
| .start_scsi_mq = NULL, |
| .abort_isp = qla8044_abort_isp, |
| .iospace_config = qla82xx_iospace_config, |
| .initialize_adapter = qla2x00_initialize_adapter, |
| }; |
| |
| static struct isp_operations qla83xx_isp_ops = { |
| .pci_config = qla25xx_pci_config, |
| .reset_chip = qla24xx_reset_chip, |
| .chip_diag = qla24xx_chip_diag, |
| .config_rings = qla24xx_config_rings, |
| .reset_adapter = qla24xx_reset_adapter, |
| .nvram_config = qla81xx_nvram_config, |
| .update_fw_options = qla81xx_update_fw_options, |
| .load_risc = qla81xx_load_risc, |
| .pci_info_str = qla24xx_pci_info_str, |
| .fw_version_str = qla24xx_fw_version_str, |
| .intr_handler = qla24xx_intr_handler, |
| .enable_intrs = qla24xx_enable_intrs, |
| .disable_intrs = qla24xx_disable_intrs, |
| .abort_command = qla24xx_abort_command, |
| .target_reset = qla24xx_abort_target, |
| .lun_reset = qla24xx_lun_reset, |
| .fabric_login = qla24xx_login_fabric, |
| .fabric_logout = qla24xx_fabric_logout, |
| .calc_req_entries = NULL, |
| .build_iocbs = NULL, |
| .prep_ms_iocb = qla24xx_prep_ms_iocb, |
| .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb, |
| .read_nvram = NULL, |
| .write_nvram = NULL, |
| .fw_dump = qla83xx_fw_dump, |
| .beacon_on = qla24xx_beacon_on, |
| .beacon_off = qla24xx_beacon_off, |
| .beacon_blink = qla83xx_beacon_blink, |
| .read_optrom = qla25xx_read_optrom_data, |
| .write_optrom = qla24xx_write_optrom_data, |
| .get_flash_version = qla24xx_get_flash_version, |
| .start_scsi = qla24xx_dif_start_scsi, |
| .start_scsi_mq = qla2xxx_dif_start_scsi_mq, |
| .abort_isp = qla2x00_abort_isp, |
| .iospace_config = qla83xx_iospace_config, |
| .initialize_adapter = qla2x00_initialize_adapter, |
| }; |
| |
| static struct isp_operations qlafx00_isp_ops = { |
| .pci_config = qlafx00_pci_config, |
| .reset_chip = qlafx00_soft_reset, |
| .chip_diag = qlafx00_chip_diag, |
| .config_rings = qlafx00_config_rings, |
| .reset_adapter = qlafx00_soft_reset, |
| .nvram_config = NULL, |
| .update_fw_options = NULL, |
| .load_risc = NULL, |
| .pci_info_str = qlafx00_pci_info_str, |
| .fw_version_str = qlafx00_fw_version_str, |
| .intr_handler = qlafx00_intr_handler, |
| .enable_intrs = qlafx00_enable_intrs, |
| .disable_intrs = qlafx00_disable_intrs, |
| .abort_command = qla24xx_async_abort_command, |
| .target_reset = qlafx00_abort_target, |
| .lun_reset = qlafx00_lun_reset, |
| .fabric_login = NULL, |
| .fabric_logout = NULL, |
| .calc_req_entries = NULL, |
| .build_iocbs = NULL, |
| .prep_ms_iocb = qla24xx_prep_ms_iocb, |
| .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb, |
| .read_nvram = qla24xx_read_nvram_data, |
| .write_nvram = qla24xx_write_nvram_data, |
| .fw_dump = NULL, |
| .beacon_on = qla24xx_beacon_on, |
| .beacon_off = qla24xx_beacon_off, |
| .beacon_blink = NULL, |
| .read_optrom = qla24xx_read_optrom_data, |
| .write_optrom = qla24xx_write_optrom_data, |
| .get_flash_version = qla24xx_get_flash_version, |
| .start_scsi = qlafx00_start_scsi, |
| .start_scsi_mq = NULL, |
| .abort_isp = qlafx00_abort_isp, |
| .iospace_config = qlafx00_iospace_config, |
| .initialize_adapter = qlafx00_initialize_adapter, |
| }; |
| |
| static struct isp_operations qla27xx_isp_ops = { |
| .pci_config = qla25xx_pci_config, |
| .reset_chip = qla24xx_reset_chip, |
| .chip_diag = qla24xx_chip_diag, |
| .config_rings = qla24xx_config_rings, |
| .reset_adapter = qla24xx_reset_adapter, |
| .nvram_config = qla81xx_nvram_config, |
| .update_fw_options = qla24xx_update_fw_options, |
| .load_risc = qla81xx_load_risc, |
| .pci_info_str = qla24xx_pci_info_str, |
| .fw_version_str = qla24xx_fw_version_str, |
| .intr_handler = qla24xx_intr_handler, |
| .enable_intrs = qla24xx_enable_intrs, |
| .disable_intrs = qla24xx_disable_intrs, |
| .abort_command = qla24xx_abort_command, |
| .target_reset = qla24xx_abort_target, |
| .lun_reset = qla24xx_lun_reset, |
| .fabric_login = qla24xx_login_fabric, |
| .fabric_logout = qla24xx_fabric_logout, |
| .calc_req_entries = NULL, |
| .build_iocbs = NULL, |
| .prep_ms_iocb = qla24xx_prep_ms_iocb, |
| .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb, |
| .read_nvram = NULL, |
| .write_nvram = NULL, |
| .fw_dump = qla27xx_fwdump, |
| .beacon_on = qla24xx_beacon_on, |
| .beacon_off = qla24xx_beacon_off, |
| .beacon_blink = qla83xx_beacon_blink, |
| .read_optrom = qla25xx_read_optrom_data, |
| .write_optrom = qla24xx_write_optrom_data, |
| .get_flash_version = qla24xx_get_flash_version, |
| .start_scsi = qla24xx_dif_start_scsi, |
| .start_scsi_mq = qla2xxx_dif_start_scsi_mq, |
| .abort_isp = qla2x00_abort_isp, |
| .iospace_config = qla83xx_iospace_config, |
| .initialize_adapter = qla2x00_initialize_adapter, |
| }; |
| |
| static inline void |
| qla2x00_set_isp_flags(struct qla_hw_data *ha) |
| { |
| ha->device_type = DT_EXTENDED_IDS; |
| switch (ha->pdev->device) { |
| case PCI_DEVICE_ID_QLOGIC_ISP2100: |
| ha->isp_type |= DT_ISP2100; |
| ha->device_type &= ~DT_EXTENDED_IDS; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2100; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP2200: |
| ha->isp_type |= DT_ISP2200; |
| ha->device_type &= ~DT_EXTENDED_IDS; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2100; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP2300: |
| ha->isp_type |= DT_ISP2300; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2300; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP2312: |
| ha->isp_type |= DT_ISP2312; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2300; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP2322: |
| ha->isp_type |= DT_ISP2322; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| if (ha->pdev->subsystem_vendor == 0x1028 && |
| ha->pdev->subsystem_device == 0x0170) |
| ha->device_type |= DT_OEM_001; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2300; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP6312: |
| ha->isp_type |= DT_ISP6312; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2300; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP6322: |
| ha->isp_type |= DT_ISP6322; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2300; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP2422: |
| ha->isp_type |= DT_ISP2422; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->device_type |= DT_FWI2; |
| ha->device_type |= DT_IIDMA; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP2432: |
| ha->isp_type |= DT_ISP2432; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->device_type |= DT_FWI2; |
| ha->device_type |= DT_IIDMA; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP8432: |
| ha->isp_type |= DT_ISP8432; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->device_type |= DT_FWI2; |
| ha->device_type |= DT_IIDMA; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP5422: |
| ha->isp_type |= DT_ISP5422; |
| ha->device_type |= DT_FWI2; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP5432: |
| ha->isp_type |= DT_ISP5432; |
| ha->device_type |= DT_FWI2; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP2532: |
| ha->isp_type |= DT_ISP2532; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->device_type |= DT_FWI2; |
| ha->device_type |= DT_IIDMA; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP8001: |
| ha->isp_type |= DT_ISP8001; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->device_type |= DT_FWI2; |
| ha->device_type |= DT_IIDMA; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP8021: |
| ha->isp_type |= DT_ISP8021; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->device_type |= DT_FWI2; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| /* Initialize 82XX ISP flags */ |
| qla82xx_init_flags(ha); |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP8044: |
| ha->isp_type |= DT_ISP8044; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->device_type |= DT_FWI2; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| /* Initialize 82XX ISP flags */ |
| qla82xx_init_flags(ha); |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP2031: |
| ha->isp_type |= DT_ISP2031; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->device_type |= DT_FWI2; |
| ha->device_type |= DT_IIDMA; |
| ha->device_type |= DT_T10_PI; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP8031: |
| ha->isp_type |= DT_ISP8031; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->device_type |= DT_FWI2; |
| ha->device_type |= DT_IIDMA; |
| ha->device_type |= DT_T10_PI; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISPF001: |
| ha->isp_type |= DT_ISPFX00; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP2071: |
| ha->isp_type |= DT_ISP2071; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->device_type |= DT_FWI2; |
| ha->device_type |= DT_IIDMA; |
| ha->device_type |= DT_T10_PI; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP2271: |
| ha->isp_type |= DT_ISP2271; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->device_type |= DT_FWI2; |
| ha->device_type |= DT_IIDMA; |
| ha->device_type |= DT_T10_PI; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP2261: |
| ha->isp_type |= DT_ISP2261; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->device_type |= DT_FWI2; |
| ha->device_type |= DT_IIDMA; |
| ha->device_type |= DT_T10_PI; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP2081: |
| case PCI_DEVICE_ID_QLOGIC_ISP2089: |
| ha->isp_type |= DT_ISP2081; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->device_type |= DT_FWI2; |
| ha->device_type |= DT_IIDMA; |
| ha->device_type |= DT_T10_PI; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| break; |
| case PCI_DEVICE_ID_QLOGIC_ISP2281: |
| case PCI_DEVICE_ID_QLOGIC_ISP2289: |
| ha->isp_type |= DT_ISP2281; |
| ha->device_type |= DT_ZIO_SUPPORTED; |
| ha->device_type |= DT_FWI2; |
| ha->device_type |= DT_IIDMA; |
| ha->device_type |= DT_T10_PI; |
| ha->fw_srisc_address = RISC_START_ADDRESS_2400; |
| break; |
| } |
| |
| if (IS_QLA82XX(ha)) |
| ha->port_no = ha->portnum & 1; |
| else { |
| /* Get adapter physical port no from interrupt pin register. */ |
| pci_read_config_byte(ha->pdev, PCI_INTERRUPT_PIN, &ha->port_no); |
| if (IS_QLA25XX(ha) || IS_QLA2031(ha) || |
| IS_QLA27XX(ha) || IS_QLA28XX(ha)) |
| ha->port_no--; |
| else |
| ha->port_no = !(ha->port_no & 1); |
| } |
| |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x000b, |
| "device_type=0x%x port=%d fw_srisc_address=0x%x.\n", |
| ha->device_type, ha->port_no, ha->fw_srisc_address); |
| } |
| |
| static void |
| qla2xxx_scan_start(struct Scsi_Host *shost) |
| { |
| scsi_qla_host_t *vha = shost_priv(shost); |
| |
| if (vha->hw->flags.running_gold_fw) |
| return; |
| |
| set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); |
| set_bit(RSCN_UPDATE, &vha->dpc_flags); |
| set_bit(NPIV_CONFIG_NEEDED, &vha->dpc_flags); |
| } |
| |
| static int |
| qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time) |
| { |
| scsi_qla_host_t *vha = shost_priv(shost); |
| |
| if (test_bit(UNLOADING, &vha->dpc_flags)) |
| return 1; |
| if (!vha->host) |
| return 1; |
| if (time > vha->hw->loop_reset_delay * HZ) |
| return 1; |
| |
| return atomic_read(&vha->loop_state) == LOOP_READY; |
| } |
| |
| static void qla2x00_iocb_work_fn(struct work_struct *work) |
| { |
| struct scsi_qla_host *vha = container_of(work, |
| struct scsi_qla_host, iocb_work); |
| struct qla_hw_data *ha = vha->hw; |
| struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); |
| int i = 2; |
| unsigned long flags; |
| |
| if (test_bit(UNLOADING, &base_vha->dpc_flags)) |
| return; |
| |
| while (!list_empty(&vha->work_list) && i > 0) { |
| qla2x00_do_work(vha); |
| i--; |
| } |
| |
| spin_lock_irqsave(&vha->work_lock, flags); |
| clear_bit(IOCB_WORK_ACTIVE, &vha->dpc_flags); |
| spin_unlock_irqrestore(&vha->work_lock, flags); |
| } |
| |
| /* |
| * PCI driver interface |
| */ |
| static int |
| qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| int ret = -ENODEV; |
| struct Scsi_Host *host; |
| scsi_qla_host_t *base_vha = NULL; |
| struct qla_hw_data *ha; |
| char pci_info[30]; |
| char fw_str[30], wq_name[30]; |
| struct scsi_host_template *sht; |
| int bars, mem_only = 0; |
| uint16_t req_length = 0, rsp_length = 0; |
| struct req_que *req = NULL; |
| struct rsp_que *rsp = NULL; |
| int i; |
| |
| bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO); |
| sht = &qla2xxx_driver_template; |
| if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8432 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8001 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8021 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2031 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8031 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISPF001 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8044 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2071 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2271 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2261 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2081 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2281 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2089 || |
| pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2289) { |
| bars = pci_select_bars(pdev, IORESOURCE_MEM); |
| mem_only = 1; |
| ql_dbg_pci(ql_dbg_init, pdev, 0x0007, |
| "Mem only adapter.\n"); |
| } |
| ql_dbg_pci(ql_dbg_init, pdev, 0x0008, |
| "Bars=%d.\n", bars); |
| |
| if (mem_only) { |
| if (pci_enable_device_mem(pdev)) |
| return ret; |
| } else { |
| if (pci_enable_device(pdev)) |
| return ret; |
| } |
| |
| /* This may fail but that's ok */ |
| pci_enable_pcie_error_reporting(pdev); |
| |
| /* Turn off T10-DIF when FC-NVMe is enabled */ |
| if (ql2xnvmeenable) |
| ql2xenabledif = 0; |
| |
| ha = kzalloc(sizeof(struct qla_hw_data), GFP_KERNEL); |
| if (!ha) { |
| ql_log_pci(ql_log_fatal, pdev, 0x0009, |
| "Unable to allocate memory for ha.\n"); |
| goto disable_device; |
| } |
| ql_dbg_pci(ql_dbg_init, pdev, 0x000a, |
| "Memory allocated for ha=%p.\n", ha); |
| ha->pdev = pdev; |
| INIT_LIST_HEAD(&ha->tgt.q_full_list); |
| spin_lock_init(&ha->tgt.q_full_lock); |
| spin_lock_init(&ha->tgt.sess_lock); |
| spin_lock_init(&ha->tgt.atio_lock); |
| |
| atomic_set(&ha->nvme_active_aen_cnt, 0); |
| |
| /* Clear our data area */ |
| ha->bars = bars; |
| ha->mem_only = mem_only; |
| spin_lock_init(&ha->hardware_lock); |
| spin_lock_init(&ha->vport_slock); |
| mutex_init(&ha->selflogin_lock); |
| mutex_init(&ha->optrom_mutex); |
| |
| /* Set ISP-type information. */ |
| qla2x00_set_isp_flags(ha); |
| |
| /* Set EEH reset type to fundamental if required by hba */ |
| if (IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha) || |
| IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) |
| pdev->needs_freset = 1; |
| |
| ha->prev_topology = 0; |
| ha->init_cb_size = sizeof(init_cb_t); |
| ha->link_data_rate = PORT_SPEED_UNKNOWN; |
| ha->optrom_size = OPTROM_SIZE_2300; |
| ha->max_exchg = FW_MAX_EXCHANGES_CNT; |
| atomic_set(&ha->num_pend_mbx_stage1, 0); |
| atomic_set(&ha->num_pend_mbx_stage2, 0); |
| atomic_set(&ha->num_pend_mbx_stage3, 0); |
| atomic_set(&ha->zio_threshold, DEFAULT_ZIO_THRESHOLD); |
| ha->last_zio_threshold = DEFAULT_ZIO_THRESHOLD; |
| |
| /* Assign ISP specific operations. */ |
| if (IS_QLA2100(ha)) { |
| ha->max_fibre_devices = MAX_FIBRE_DEVICES_2100; |
| ha->mbx_count = MAILBOX_REGISTER_COUNT_2100; |
| req_length = REQUEST_ENTRY_CNT_2100; |
| rsp_length = RESPONSE_ENTRY_CNT_2100; |
| ha->max_loop_id = SNS_LAST_LOOP_ID_2100; |
| ha->gid_list_info_size = 4; |
| ha->flash_conf_off = ~0; |
| ha->flash_data_off = ~0; |
| ha->nvram_conf_off = ~0; |
| ha->nvram_data_off = ~0; |
| ha->isp_ops = &qla2100_isp_ops; |
| } else if (IS_QLA2200(ha)) { |
| ha->max_fibre_devices = MAX_FIBRE_DEVICES_2100; |
| ha->mbx_count = MAILBOX_REGISTER_COUNT_2200; |
| req_length = REQUEST_ENTRY_CNT_2200; |
| rsp_length = RESPONSE_ENTRY_CNT_2100; |
| ha->max_loop_id = SNS_LAST_LOOP_ID_2100; |
| ha->gid_list_info_size = 4; |
| ha->flash_conf_off = ~0; |
| ha->flash_data_off = ~0; |
| ha->nvram_conf_off = ~0; |
| ha->nvram_data_off = ~0; |
| ha->isp_ops = &qla2100_isp_ops; |
| } else if (IS_QLA23XX(ha)) { |
| ha->max_fibre_devices = MAX_FIBRE_DEVICES_2100; |
| ha->mbx_count = MAILBOX_REGISTER_COUNT; |
| req_length = REQUEST_ENTRY_CNT_2200; |
| rsp_length = RESPONSE_ENTRY_CNT_2300; |
| ha->max_loop_id = SNS_LAST_LOOP_ID_2300; |
| ha->gid_list_info_size = 6; |
| if (IS_QLA2322(ha) || IS_QLA6322(ha)) |
| ha->optrom_size = OPTROM_SIZE_2322; |
| ha->flash_conf_off = ~0; |
| ha->flash_data_off = ~0; |
| ha->nvram_conf_off = ~0; |
| ha->nvram_data_off = ~0; |
| ha->isp_ops = &qla2300_isp_ops; |
| } else if (IS_QLA24XX_TYPE(ha)) { |
| ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400; |
| ha->mbx_count = MAILBOX_REGISTER_COUNT; |
| req_length = REQUEST_ENTRY_CNT_24XX; |
| rsp_length = RESPONSE_ENTRY_CNT_2300; |
| ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX; |
| ha->max_loop_id = SNS_LAST_LOOP_ID_2300; |
| ha->init_cb_size = sizeof(struct mid_init_cb_24xx); |
| ha->gid_list_info_size = 8; |
| ha->optrom_size = OPTROM_SIZE_24XX; |
| ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA24XX; |
| ha->isp_ops = &qla24xx_isp_ops; |
| ha->flash_conf_off = FARX_ACCESS_FLASH_CONF; |
| ha->flash_data_off = FARX_ACCESS_FLASH_DATA; |
| ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF; |
| ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA; |
| } else if (IS_QLA25XX(ha)) { |
| ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400; |
| ha->mbx_count = MAILBOX_REGISTER_COUNT; |
| req_length = REQUEST_ENTRY_CNT_24XX; |
| rsp_length = RESPONSE_ENTRY_CNT_2300; |
| ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX; |
| ha->max_loop_id = SNS_LAST_LOOP_ID_2300; |
| ha->init_cb_size = sizeof(struct mid_init_cb_24xx); |
| ha->gid_list_info_size = 8; |
| ha->optrom_size = OPTROM_SIZE_25XX; |
| ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX; |
| ha->isp_ops = &qla25xx_isp_ops; |
| ha->flash_conf_off = FARX_ACCESS_FLASH_CONF; |
| ha->flash_data_off = FARX_ACCESS_FLASH_DATA; |
| ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF; |
| ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA; |
| } else if (IS_QLA81XX(ha)) { |
| ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400; |
| ha->mbx_count = MAILBOX_REGISTER_COUNT; |
| req_length = REQUEST_ENTRY_CNT_24XX; |
| rsp_length = RESPONSE_ENTRY_CNT_2300; |
| ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX; |
| ha->max_loop_id = SNS_LAST_LOOP_ID_2300; |
| ha->init_cb_size = sizeof(struct mid_init_cb_81xx); |
| ha->gid_list_info_size = 8; |
| ha->optrom_size = OPTROM_SIZE_81XX; |
| ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX; |
| ha->isp_ops = &qla81xx_isp_ops; |
| ha->flash_conf_off = FARX_ACCESS_FLASH_CONF_81XX; |
| ha->flash_data_off = FARX_ACCESS_FLASH_DATA_81XX; |
| ha->nvram_conf_off = ~0; |
| ha->nvram_data_off = ~0; |
| } else if (IS_QLA82XX(ha)) { |
| ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400; |
| ha->mbx_count = MAILBOX_REGISTER_COUNT; |
| req_length = REQUEST_ENTRY_CNT_82XX; |
| rsp_length = RESPONSE_ENTRY_CNT_82XX; |
| ha->max_loop_id = SNS_LAST_LOOP_ID_2300; |
| ha->init_cb_size = sizeof(struct mid_init_cb_81xx); |
| ha->gid_list_info_size = 8; |
| ha->optrom_size = OPTROM_SIZE_82XX; |
| ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX; |
| ha->isp_ops = &qla82xx_isp_ops; |
| ha->flash_conf_off = FARX_ACCESS_FLASH_CONF; |
| ha->flash_data_off = FARX_ACCESS_FLASH_DATA; |
| ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF; |
| ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA; |
| } else if (IS_QLA8044(ha)) { |
| ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400; |
| ha->mbx_count = MAILBOX_REGISTER_COUNT; |
| req_length = REQUEST_ENTRY_CNT_82XX; |
| rsp_length = RESPONSE_ENTRY_CNT_82XX; |
| ha->max_loop_id = SNS_LAST_LOOP_ID_2300; |
| ha->init_cb_size = sizeof(struct mid_init_cb_81xx); |
| ha->gid_list_info_size = 8; |
| ha->optrom_size = OPTROM_SIZE_83XX; |
| ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX; |
| ha->isp_ops = &qla8044_isp_ops; |
| ha->flash_conf_off = FARX_ACCESS_FLASH_CONF; |
| ha->flash_data_off = FARX_ACCESS_FLASH_DATA; |
| ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF; |
| ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA; |
| } else if (IS_QLA83XX(ha)) { |
| ha->portnum = PCI_FUNC(ha->pdev->devfn); |
| ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400; |
| ha->mbx_count = MAILBOX_REGISTER_COUNT; |
| req_length = REQUEST_ENTRY_CNT_83XX; |
| rsp_length = RESPONSE_ENTRY_CNT_83XX; |
| ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX; |
| ha->max_loop_id = SNS_LAST_LOOP_ID_2300; |
| ha->init_cb_size = sizeof(struct mid_init_cb_81xx); |
| ha->gid_list_info_size = 8; |
| ha->optrom_size = OPTROM_SIZE_83XX; |
| ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX; |
| ha->isp_ops = &qla83xx_isp_ops; |
| ha->flash_conf_off = FARX_ACCESS_FLASH_CONF_81XX; |
| ha->flash_data_off = FARX_ACCESS_FLASH_DATA_81XX; |
| ha->nvram_conf_off = ~0; |
| ha->nvram_data_off = ~0; |
| } else if (IS_QLAFX00(ha)) { |
| ha->max_fibre_devices = MAX_FIBRE_DEVICES_FX00; |
| ha->mbx_count = MAILBOX_REGISTER_COUNT_FX00; |
| ha->aen_mbx_count = AEN_MAILBOX_REGISTER_COUNT_FX00; |
| req_length = REQUEST_ENTRY_CNT_FX00; |
| rsp_length = RESPONSE_ENTRY_CNT_FX00; |
| ha->isp_ops = &qlafx00_isp_ops; |
| ha->port_down_retry_count = 30; /* default value */ |
| ha->mr.fw_hbt_cnt = QLAFX00_HEARTBEAT_INTERVAL; |
| ha->mr.fw_reset_timer_tick = QLAFX00_RESET_INTERVAL; |
| ha->mr.fw_critemp_timer_tick = QLAFX00_CRITEMP_INTERVAL; |
| ha->mr.fw_hbt_en = 1; |
| ha->mr.host_info_resend = false; |
| ha->mr.hinfo_resend_timer_tick = QLAFX00_HINFO_RESEND_INTERVAL; |
| } else if (IS_QLA27XX(ha)) { |
| ha->portnum = PCI_FUNC(ha->pdev->devfn); |
| ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400; |
| ha->mbx_count = MAILBOX_REGISTER_COUNT; |
| req_length = REQUEST_ENTRY_CNT_83XX; |
| rsp_length = RESPONSE_ENTRY_CNT_83XX; |
| ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX; |
| ha->max_loop_id = SNS_LAST_LOOP_ID_2300; |
| ha->init_cb_size = sizeof(struct mid_init_cb_81xx); |
| ha->gid_list_info_size = 8; |
| ha->optrom_size = OPTROM_SIZE_83XX; |
| ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX; |
| ha->isp_ops = &qla27xx_isp_ops; |
| ha->flash_conf_off = FARX_ACCESS_FLASH_CONF_81XX; |
| ha->flash_data_off = FARX_ACCESS_FLASH_DATA_81XX; |
| ha->nvram_conf_off = ~0; |
| ha->nvram_data_off = ~0; |
| } else if (IS_QLA28XX(ha)) { |
| ha->portnum = PCI_FUNC(ha->pdev->devfn); |
| ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400; |
| ha->mbx_count = MAILBOX_REGISTER_COUNT; |
| req_length = REQUEST_ENTRY_CNT_24XX; |
| rsp_length = RESPONSE_ENTRY_CNT_2300; |
| ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX; |
| ha->max_loop_id = SNS_LAST_LOOP_ID_2300; |
| ha->init_cb_size = sizeof(struct mid_init_cb_81xx); |
| ha->gid_list_info_size = 8; |
| ha->optrom_size = OPTROM_SIZE_28XX; |
| ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX; |
| ha->isp_ops = &qla27xx_isp_ops; |
| ha->flash_conf_off = FARX_ACCESS_FLASH_CONF_28XX; |
| ha->flash_data_off = FARX_ACCESS_FLASH_DATA_28XX; |
| ha->nvram_conf_off = ~0; |
| ha->nvram_data_off = ~0; |
| } |
| |
| ql_dbg_pci(ql_dbg_init, pdev, 0x001e, |
| "mbx_count=%d, req_length=%d, " |
| "rsp_length=%d, max_loop_id=%d, init_cb_size=%d, " |
| "gid_list_info_size=%d, optrom_size=%d, nvram_npiv_size=%d, " |
| "max_fibre_devices=%d.\n", |
| ha->mbx_count, req_length, rsp_length, ha->max_loop_id, |
| ha->init_cb_size, ha->gid_list_info_size, ha->optrom_size, |
| ha->nvram_npiv_size, ha->max_fibre_devices); |
| ql_dbg_pci(ql_dbg_init, pdev, 0x001f, |
| "isp_ops=%p, flash_conf_off=%d, " |
| "flash_data_off=%d, nvram_conf_off=%d, nvram_data_off=%d.\n", |
| ha->isp_ops, ha->flash_conf_off, ha->flash_data_off, |
| ha->nvram_conf_off, ha->nvram_data_off); |
| |
| /* Configure PCI I/O space */ |
| ret = ha->isp_ops->iospace_config(ha); |
| if (ret) |
| goto iospace_config_failed; |
| |
| ql_log_pci(ql_log_info, pdev, 0x001d, |
| "Found an ISP%04X irq %d iobase 0x%p.\n", |
| pdev->device, pdev->irq, ha->iobase); |
| mutex_init(&ha->vport_lock); |
| mutex_init(&ha->mq_lock); |
| init_completion(&ha->mbx_cmd_comp); |
| complete(&ha->mbx_cmd_comp); |
| init_completion(&ha->mbx_intr_comp); |
| init_completion(&ha->dcbx_comp); |
| init_completion(&ha->lb_portup_comp); |
| |
| set_bit(0, (unsigned long *) ha->vp_idx_map); |
| |
| qla2x00_config_dma_addressing(ha); |
| ql_dbg_pci(ql_dbg_init, pdev, 0x0020, |
| "64 Bit addressing is %s.\n", |
| ha->flags.enable_64bit_addressing ? "enable" : |
| "disable"); |
| ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp); |
| if (ret) { |
| ql_log_pci(ql_log_fatal, pdev, 0x0031, |
| "Failed to allocate memory for adapter, aborting.\n"); |
| |
| goto probe_hw_failed; |
| } |
| |
| req->max_q_depth = MAX_Q_DEPTH; |
| if (ql2xmaxqdepth != 0 && ql2xmaxqdepth <= 0xffffU) |
| req->max_q_depth = ql2xmaxqdepth; |
| |
| |
| base_vha = qla2x00_create_host(sht, ha); |
| if (!base_vha) { |
| ret = -ENOMEM; |
| goto probe_hw_failed; |
| } |
| |
| pci_set_drvdata(pdev, base_vha); |
| set_bit(PFLG_DRIVER_PROBING, &base_vha->pci_flags); |
| |
| host = base_vha->host; |
| base_vha->req = req; |
| if (IS_QLA2XXX_MIDTYPE(ha)) |
| base_vha->mgmt_svr_loop_id = |
| qla2x00_reserve_mgmt_server_loop_id(base_vha); |
| else |
| base_vha->mgmt_svr_loop_id = MANAGEMENT_SERVER + |
| base_vha->vp_idx; |
| |
| /* Setup fcport template structure. */ |
| ha->mr.fcport.vha = base_vha; |
| ha->mr.fcport.port_type = FCT_UNKNOWN; |
| ha->mr.fcport.loop_id = FC_NO_LOOP_ID; |
| qla2x00_set_fcport_state(&ha->mr.fcport, FCS_UNCONFIGURED); |
| ha->mr.fcport.supported_classes = FC_COS_UNSPECIFIED; |
| ha->mr.fcport.scan_state = 1; |
| |
| /* Set the SG table size based on ISP type */ |
| if (!IS_FWI2_CAPABLE(ha)) { |
| if (IS_QLA2100(ha)) |
| host->sg_tablesize = 32; |
| } else { |
| if (!IS_QLA82XX(ha)) |
| host->sg_tablesize = QLA_SG_ALL; |
| } |
| host->max_id = ha->max_fibre_devices; |
| host->cmd_per_lun = 3; |
| host->unique_id = host->host_no; |
| if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) |
| host->max_cmd_len = 32; |
| else |
| host->max_cmd_len = MAX_CMDSZ; |
| host->max_channel = MAX_BUSES - 1; |
| /* Older HBAs support only 16-bit LUNs */ |
| if (!IS_QLAFX00(ha) && !IS_FWI2_CAPABLE(ha) && |
| ql2xmaxlun > 0xffff) |
| host->max_lun = 0xffff; |
| else |
| host->max_lun = ql2xmaxlun; |
| host->transportt = qla2xxx_transport_template; |
| sht->vendor_id = (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC); |
| |
| ql_dbg(ql_dbg_init, base_vha, 0x0033, |
| "max_id=%d this_id=%d " |
| "cmd_per_len=%d unique_id=%d max_cmd_len=%d max_channel=%d " |
| "max_lun=%llu transportt=%p, vendor_id=%llu.\n", host->max_id, |
| host->this_id, host->cmd_per_lun, host->unique_id, |
| host->max_cmd_len, host->max_channel, host->max_lun, |
| host->transportt, sht->vendor_id); |
| |
| INIT_WORK(&base_vha->iocb_work, qla2x00_iocb_work_fn); |
| |
| /* Set up the irqs */ |
| ret = qla2x00_request_irqs(ha, rsp); |
| if (ret) |
| goto probe_failed; |
| |
| /* Alloc arrays of request and response ring ptrs */ |
| ret = qla2x00_alloc_queues(ha, req, rsp); |
| if (ret) { |
| ql_log(ql_log_fatal, base_vha, 0x003d, |
| "Failed to allocate memory for queue pointers..." |
| "aborting.\n"); |
| ret = -ENODEV; |
| goto probe_failed; |
| } |
| |
| if (ha->mqenable) { |
| /* number of hardware queues supported by blk/scsi-mq*/ |
| host->nr_hw_queues = ha->max_qpairs; |
| |
| ql_dbg(ql_dbg_init, base_vha, 0x0192, |
| "blk/scsi-mq enabled, HW queues = %d.\n", host->nr_hw_queues); |
| } else { |
| if (ql2xnvmeenable) { |
| host->nr_hw_queues = ha->max_qpairs; |
| ql_dbg(ql_dbg_init, base_vha, 0x0194, |
| "FC-NVMe support is enabled, HW queues=%d\n", |
| host->nr_hw_queues); |
| } else { |
| ql_dbg(ql_dbg_init, base_vha, 0x0193, |
| "blk/scsi-mq disabled.\n"); |
| } |
| } |
| |
| qlt_probe_one_stage1(base_vha, ha); |
| |
| pci_save_state(pdev); |
| |
| /* Assign back pointers */ |
| rsp->req = req; |
| req->rsp = rsp; |
| |
| if (IS_QLAFX00(ha)) { |
| ha->rsp_q_map[0] = rsp; |
| ha->req_q_map[0] = req; |
| set_bit(0, ha->req_qid_map); |
| set_bit(0, ha->rsp_qid_map); |
| } |
| |
| /* FWI2-capable only. */ |
| req->req_q_in = &ha->iobase->isp24.req_q_in; |
| req->req_q_out = &ha->iobase->isp24.req_q_out; |
| rsp->rsp_q_in = &ha->iobase->isp24.rsp_q_in; |
| rsp->rsp_q_out = &ha->iobase->isp24.rsp_q_out; |
| if (ha->mqenable || IS_QLA83XX(ha) || IS_QLA27XX(ha) || |
| IS_QLA28XX(ha)) { |
| req->req_q_in = &ha->mqiobase->isp25mq.req_q_in; |
| req->req_q_out = &ha->mqiobase->isp25mq.req_q_out; |
| rsp->rsp_q_in = &ha->mqiobase->isp25mq.rsp_q_in; |
| rsp->rsp_q_out = &ha->mqiobase->isp25mq.rsp_q_out; |
| } |
| |
| if (IS_QLAFX00(ha)) { |
| req->req_q_in = &ha->iobase->ispfx00.req_q_in; |
| req->req_q_out = &ha->iobase->ispfx00.req_q_out; |
| rsp->rsp_q_in = &ha->iobase->ispfx00.rsp_q_in; |
| rsp->rsp_q_out = &ha->iobase->ispfx00.rsp_q_out; |
| } |
| |
| if (IS_P3P_TYPE(ha)) { |
| req->req_q_out = &ha->iobase->isp82.req_q_out[0]; |
| rsp->rsp_q_in = &ha->iobase->isp82.rsp_q_in[0]; |
| rsp->rsp_q_out = &ha->iobase->isp82.rsp_q_out[0]; |
| } |
| |
| ql_dbg(ql_dbg_multiq, base_vha, 0xc009, |
| "rsp_q_map=%p req_q_map=%p rsp->req=%p req->rsp=%p.\n", |
| ha->rsp_q_map, ha->req_q_map, rsp->req, req->rsp); |
| ql_dbg(ql_dbg_multiq, base_vha, 0xc00a, |
| "req->req_q_in=%p req->req_q_out=%p " |
| "rsp->rsp_q_in=%p rsp->rsp_q_out=%p.\n", |
| req->req_q_in, req->req_q_out, |
| rsp->rsp_q_in, rsp->rsp_q_out); |
| ql_dbg(ql_dbg_init, base_vha, 0x003e, |
| "rsp_q_map=%p req_q_map=%p rsp->req=%p req->rsp=%p.\n", |
| ha->rsp_q_map, ha->req_q_map, rsp->req, req->rsp); |
| ql_dbg(ql_dbg_init, base_vha, 0x003f, |
| "req->req_q_in=%p req->req_q_out=%p rsp->rsp_q_in=%p rsp->rsp_q_out=%p.\n", |
| req->req_q_in, req->req_q_out, rsp->rsp_q_in, rsp->rsp_q_out); |
| |
| ha->wq = alloc_workqueue("qla2xxx_wq", 0, 0); |
| if (unlikely(!ha->wq)) { |
| ret = -ENOMEM; |
| goto probe_failed; |
| } |
| |
| if (ha->isp_ops->initialize_adapter(base_vha)) { |
| ql_log(ql_log_fatal, base_vha, 0x00d6, |
| "Failed to initialize adapter - Adapter flags %x.\n", |
| base_vha->device_flags); |
| |
| if (IS_QLA82XX(ha)) { |
| qla82xx_idc_lock(ha); |
| qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, |
| QLA8XXX_DEV_FAILED); |
| qla82xx_idc_unlock(ha); |
| ql_log(ql_log_fatal, base_vha, 0x00d7, |
| "HW State: FAILED.\n"); |
| } else if (IS_QLA8044(ha)) { |
| qla8044_idc_lock(ha); |
| qla8044_wr_direct(base_vha, |
| QLA8044_CRB_DEV_STATE_INDEX, |
| QLA8XXX_DEV_FAILED); |
| qla8044_idc_unlock(ha); |
| ql_log(ql_log_fatal, base_vha, 0x0150, |
| "HW State: FAILED.\n"); |
| } |
| |
| ret = -ENODEV; |
| goto probe_failed; |
| } |
| |
| if (IS_QLAFX00(ha)) |
| host->can_queue = QLAFX00_MAX_CANQUEUE; |
| else |
| host->can_queue = req->num_outstanding_cmds - 10; |
| |
| ql_dbg(ql_dbg_init, base_vha, 0x0032, |
| "can_queue=%d, req=%p, mgmt_svr_loop_id=%d, sg_tablesize=%d.\n", |
| host->can_queue, base_vha->req, |
| base_vha->mgmt_svr_loop_id, host->sg_tablesize); |
| |
| if (ha->mqenable) { |
| bool startit = false; |
| |
| if (QLA_TGT_MODE_ENABLED()) |
| startit = false; |
| |
| if (ql2x_ini_mode == QLA2XXX_INI_MODE_ENABLED) |
| startit = true; |
| |
| /* Create start of day qpairs for Block MQ */ |
| for (i = 0; i < ha->max_qpairs; i++) |
| qla2xxx_create_qpair(base_vha, 5, 0, startit); |
| } |
| |
| if (ha->flags.running_gold_fw) |
| goto skip_dpc; |
| |
| /* |
| * Startup the kernel thread for this host adapter |
| */ |
| ha->dpc_thread = kthread_create(qla2x00_do_dpc, ha, |
| "%s_dpc", base_vha->host_str); |
| if (IS_ERR(ha->dpc_thread)) { |
| ql_log(ql_log_fatal, base_vha, 0x00ed, |
| "Failed to start DPC thread.\n"); |
| ret = PTR_ERR(ha->dpc_thread); |
| ha->dpc_thread = NULL; |
| goto probe_failed; |
| } |
| ql_dbg(ql_dbg_init, base_vha, 0x00ee, |
| "DPC thread started successfully.\n"); |
| |
| /* |
| * If we're not coming up in initiator mode, we might sit for |
| * a while without waking up the dpc thread, which leads to a |
| * stuck process warning. So just kick the dpc once here and |
| * let the kthread start (and go back to sleep in qla2x00_do_dpc). |
| */ |
| qla2xxx_wake_dpc(base_vha); |
| |
| INIT_WORK(&ha->board_disable, qla2x00_disable_board_on_pci_error); |
| |
| if (IS_QLA8031(ha) || IS_MCTP_CAPABLE(ha)) { |
| sprintf(wq_name, "qla2xxx_%lu_dpc_lp_wq", base_vha->host_no); |
| ha->dpc_lp_wq = create_singlethread_workqueue(wq_name); |
| INIT_WORK(&ha->idc_aen, qla83xx_service_idc_aen); |
| |
| sprintf(wq_name, "qla2xxx_%lu_dpc_hp_wq", base_vha->host_no); |
| ha->dpc_hp_wq = create_singlethread_workqueue(wq_name); |
| INIT_WORK(&ha->nic_core_reset, qla83xx_nic_core_reset_work); |
| INIT_WORK(&ha->idc_state_handler, |
| qla83xx_idc_state_handler_work); |
| INIT_WORK(&ha->nic_core_unrecoverable, |
| qla83xx_nic_core_unrecoverable_work); |
| } |
| |
| skip_dpc: |
| list_add_tail(&base_vha->list, &ha->vp_list); |
| base_vha->host->irq = ha->pdev->irq; |
| |
| /* Initialized the timer */ |
| qla2x00_start_timer(base_vha, WATCH_INTERVAL); |
| ql_dbg(ql_dbg_init, base_vha, 0x00ef, |
| "Started qla2x00_timer with " |
| "interval=%d.\n", WATCH_INTERVAL); |
| ql_dbg(ql_dbg_init, base_vha, 0x00f0, |
| "Detected hba at address=%p.\n", |
| ha); |
| |
| if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) { |
| if (ha->fw_attributes & BIT_4) { |
| int prot = 0, guard; |
| |
| base_vha->flags.difdix_supported = 1; |
| ql_dbg(ql_dbg_init, base_vha, 0x00f1, |
| "Registering for DIF/DIX type 1 and 3 protection.\n"); |
| if (ql2xenabledif == 1) |
| prot = SHOST_DIX_TYPE0_PROTECTION; |
| if (ql2xprotmask) |
| scsi_host_set_prot(host, ql2xprotmask); |
| else |
| scsi_host_set_prot(host, |
| prot | SHOST_DIF_TYPE1_PROTECTION |
| | SHOST_DIF_TYPE2_PROTECTION |
| | SHOST_DIF_TYPE3_PROTECTION |
| | SHOST_DIX_TYPE1_PROTECTION |
| | SHOST_DIX_TYPE2_PROTECTION |
| | SHOST_DIX_TYPE3_PROTECTION); |
| |
| guard = SHOST_DIX_GUARD_CRC; |
| |
| if (IS_PI_IPGUARD_CAPABLE(ha) && |
| (ql2xenabledif > 1 || IS_PI_DIFB_DIX0_CAPABLE(ha))) |
| guard |= SHOST_DIX_GUARD_IP; |
| |
| if (ql2xprotguard) |
| scsi_host_set_guard(host, ql2xprotguard); |
| else |
| scsi_host_set_guard(host, guard); |
| } else |
| base_vha->flags.difdix_supported = 0; |
| } |
| |
| ha->isp_ops->enable_intrs(ha); |
| |
| if (IS_QLAFX00(ha)) { |
| ret = qlafx00_fx_disc(base_vha, |
| &base_vha->hw->mr.fcport, FXDISC_GET_CONFIG_INFO); |
| host->sg_tablesize = (ha->mr.extended_io_enabled) ? |
| QLA_SG_ALL : 128; |
| } |
| |
| ret = scsi_add_host(host, &pdev->dev); |
| if (ret) |
| goto probe_failed; |
| |
| base_vha->flags.init_done = 1; |
| base_vha->flags.online = 1; |
| ha->prev_minidump_failed = 0; |
| |
| ql_dbg(ql_dbg_init, base_vha, 0x00f2, |
| "Init done and hba is online.\n"); |
| |
| if (qla_ini_mode_enabled(base_vha) || |
| qla_dual_mode_enabled(base_vha)) |
| scsi_scan_host(host); |
| else |
| ql_dbg(ql_dbg_init, base_vha, 0x0122, |
| "skipping scsi_scan_host() for non-initiator port\n"); |
| |
| qla2x00_alloc_sysfs_attr(base_vha); |
| |
| if (IS_QLAFX00(ha)) { |
| ret = qlafx00_fx_disc(base_vha, |
| &base_vha->hw->mr.fcport, FXDISC_GET_PORT_INFO); |
| |
| /* Register system information */ |
| ret = qlafx00_fx_disc(base_vha, |
| &base_vha->hw->mr.fcport, FXDISC_REG_HOST_INFO); |
| } |
| |
| qla2x00_init_host_attr(base_vha); |
| |
| qla2x00_dfs_setup(base_vha); |
| |
| ql_log(ql_log_info, base_vha, 0x00fb, |
| "QLogic %s - %s.\n", ha->model_number, ha->model_desc); |
| ql_log(ql_log_info, base_vha, 0x00fc, |
| "ISP%04X: %s @ %s hdma%c host#=%ld fw=%s.\n", |
| pdev->device, ha->isp_ops->pci_info_str(base_vha, pci_info, |
| sizeof(pci_info)), |
| pci_name(pdev), ha->flags.enable_64bit_addressing ? '+' : '-', |
| base_vha->host_no, |
| ha->isp_ops->fw_version_str(base_vha, fw_str, sizeof(fw_str))); |
| |
| qlt_add_target(ha, base_vha); |
| |
| clear_bit(PFLG_DRIVER_PROBING, &base_vha->pci_flags); |
| |
| if (test_bit(UNLOADING, &base_vha->dpc_flags)) |
| return -ENODEV; |
| |
| if (ha->flags.detected_lr_sfp) { |
| ql_log(ql_log_info, base_vha, 0xffff, |
| "Reset chip to pick up LR SFP setting\n"); |
| set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags); |
| qla2xxx_wake_dpc(base_vha); |
| } |
| |
| return 0; |
| |
| probe_failed: |
| if (base_vha->gnl.l) { |
| dma_free_coherent(&ha->pdev->dev, base_vha->gnl.size, |
| base_vha->gnl.l, base_vha->gnl.ldma); |
| base_vha->gnl.l = NULL; |
| } |
| |
| if (base_vha->timer_active) |
| qla2x00_stop_timer(base_vha); |
| base_vha->flags.online = 0; |
| if (ha->dpc_thread) { |
| struct task_struct *t = ha->dpc_thread; |
| |
| ha->dpc_thread = NULL; |
| kthread_stop(t); |
| } |
| |
| qla2x00_free_device(base_vha); |
| scsi_host_put(base_vha->host); |
| /* |
| * Need to NULL out local req/rsp after |
| * qla2x00_free_device => qla2x00_free_queues frees |
| * what these are pointing to. Or else we'll |
| * fall over below in qla2x00_free_req/rsp_que. |
| */ |
| req = NULL; |
| rsp = NULL; |
| |
| probe_hw_failed: |
| qla2x00_mem_free(ha); |
| qla2x00_free_req_que(ha, req); |
| qla2x00_free_rsp_que(ha, rsp); |
| qla2x00_clear_drv_active(ha); |
| |
| iospace_config_failed: |
| if (IS_P3P_TYPE(ha)) { |
| if (!ha->nx_pcibase) |
| iounmap((device_reg_t *)ha->nx_pcibase); |
| if (!ql2xdbwr) |
| iounmap((device_reg_t *)ha->nxdb_wr_ptr); |
| } else { |
| if (ha->iobase) |
| iounmap(ha->iobase); |
| if (ha->cregbase) |
| iounmap(ha->cregbase); |
| } |
| pci_release_selected_regions(ha->pdev, ha->bars); |
| kfree(ha); |
| |
| disable_device: |
| pci_disable_device(pdev); |
| return ret; |
| } |
| |
| static void __qla_set_remove_flag(scsi_qla_host_t *base_vha) |
| { |
| scsi_qla_host_t *vp; |
| unsigned long flags; |
| struct qla_hw_data *ha; |
| |
| if (!base_vha) |
| return; |
| |
| ha = base_vha->hw; |
| |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| list_for_each_entry(vp, &ha->vp_list, list) |
| set_bit(PFLG_DRIVER_REMOVING, &vp->pci_flags); |
| |
| /* |
| * Indicate device removal to prevent future board_disable |
| * and wait until any pending board_disable has completed. |
| */ |
| set_bit(PFLG_DRIVER_REMOVING, &base_vha->pci_flags); |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| } |
| |
| static void |
| qla2x00_shutdown(struct pci_dev *pdev) |
| { |
| scsi_qla_host_t *vha; |
| struct qla_hw_data *ha; |
| |
| vha = pci_get_drvdata(pdev); |
| ha = vha->hw; |
| |
| ql_log(ql_log_info, vha, 0xfffa, |
| "Adapter shutdown\n"); |
| |
| /* |
| * Prevent future board_disable and wait |
| * until any pending board_disable has completed. |
| */ |
| __qla_set_remove_flag(vha); |
| cancel_work_sync(&ha->board_disable); |
| |
| if (!atomic_read(&pdev->enable_cnt)) |
| return; |
| |
| /* Notify ISPFX00 firmware */ |
| if (IS_QLAFX00(ha)) |
| qlafx00_driver_shutdown(vha, 20); |
| |
| /* Turn-off FCE trace */ |
| if (ha->flags.fce_enabled) { |
| qla2x00_disable_fce_trace(vha, NULL, NULL); |
| ha->flags.fce_enabled = 0; |
| } |
| |
| /* Turn-off EFT trace */ |
| if (ha->eft) |
| qla2x00_disable_eft_trace(vha); |
| |
| if (IS_QLA25XX(ha) || IS_QLA2031(ha) || IS_QLA27XX(ha) || |
| IS_QLA28XX(ha)) { |
| if (ha->flags.fw_started) |
| qla2x00_abort_isp_cleanup(vha); |
| } else { |
| /* Stop currently executing firmware. */ |
| qla2x00_try_to_stop_firmware(vha); |
| } |
| |
| /* Disable timer */ |
| if (vha->timer_active) |
| qla2x00_stop_timer(vha); |
| |
| /* Turn adapter off line */ |
| vha->flags.online = 0; |
| |
| /* turn-off interrupts on the card */ |
| if (ha->interrupts_on) { |
| vha->flags.init_done = 0; |
| ha->isp_ops->disable_intrs(ha); |
| } |
| |
| qla2x00_free_irqs(vha); |
| |
| qla2x00_free_fw_dump(ha); |
| |
| pci_disable_device(pdev); |
| ql_log(ql_log_info, vha, 0xfffe, |
| "Adapter shutdown successfully.\n"); |
| } |
| |
| /* Deletes all the virtual ports for a given ha */ |
| static void |
| qla2x00_delete_all_vps(struct qla_hw_data *ha, scsi_qla_host_t *base_vha) |
| { |
| scsi_qla_host_t *vha; |
| unsigned long flags; |
| |
| mutex_lock(&ha->vport_lock); |
| while (ha->cur_vport_count) { |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| |
| BUG_ON(base_vha->list.next == &ha->vp_list); |
| /* This assumes first entry in ha->vp_list is always base vha */ |
| vha = list_first_entry(&base_vha->list, scsi_qla_host_t, list); |
| scsi_host_get(vha->host); |
| |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| mutex_unlock(&ha->vport_lock); |
| |
| qla_nvme_delete(vha); |
| |
| fc_vport_terminate(vha->fc_vport); |
| scsi_host_put(vha->host); |
| |
| mutex_lock(&ha->vport_lock); |
| } |
| mutex_unlock(&ha->vport_lock); |
| } |
| |
| /* Stops all deferred work threads */ |
| static void |
| qla2x00_destroy_deferred_work(struct qla_hw_data *ha) |
| { |
| /* Cancel all work and destroy DPC workqueues */ |
| if (ha->dpc_lp_wq) { |
| cancel_work_sync(&ha->idc_aen); |
| destroy_workqueue(ha->dpc_lp_wq); |
| ha->dpc_lp_wq = NULL; |
| } |
| |
| if (ha->dpc_hp_wq) { |
| cancel_work_sync(&ha->nic_core_reset); |
| cancel_work_sync(&ha->idc_state_handler); |
| cancel_work_sync(&ha->nic_core_unrecoverable); |
| destroy_workqueue(ha->dpc_hp_wq); |
| ha->dpc_hp_wq = NULL; |
| } |
| |
| /* Kill the kernel thread for this host */ |
| if (ha->dpc_thread) { |
| struct task_struct *t = ha->dpc_thread; |
| |
| /* |
| * qla2xxx_wake_dpc checks for ->dpc_thread |
| * so we need to zero it out. |
| */ |
| ha->dpc_thread = NULL; |
| kthread_stop(t); |
| } |
| } |
| |
| static void |
| qla2x00_unmap_iobases(struct qla_hw_data *ha) |
| { |
| if (IS_QLA82XX(ha)) { |
| |
| iounmap((device_reg_t *)ha->nx_pcibase); |
| if (!ql2xdbwr) |
| iounmap((device_reg_t *)ha->nxdb_wr_ptr); |
| } else { |
| if (ha->iobase) |
| iounmap(ha->iobase); |
| |
| if (ha->cregbase) |
| iounmap(ha->cregbase); |
| |
| if (ha->mqiobase) |
| iounmap(ha->mqiobase); |
| |
| if ((IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) && |
| ha->msixbase) |
| iounmap(ha->msixbase); |
| } |
| } |
| |
| static void |
| qla2x00_clear_drv_active(struct qla_hw_data *ha) |
| { |
| if (IS_QLA8044(ha)) { |
| qla8044_idc_lock(ha); |
| qla8044_clear_drv_active(ha); |
| qla8044_idc_unlock(ha); |
| } else if (IS_QLA82XX(ha)) { |
| qla82xx_idc_lock(ha); |
| qla82xx_clear_drv_active(ha); |
| qla82xx_idc_unlock(ha); |
| } |
| } |
| |
| static void |
| qla2x00_remove_one(struct pci_dev *pdev) |
| { |
| scsi_qla_host_t *base_vha; |
| struct qla_hw_data *ha; |
| |
| base_vha = pci_get_drvdata(pdev); |
| ha = base_vha->hw; |
| ql_log(ql_log_info, base_vha, 0xb079, |
| "Removing driver\n"); |
| __qla_set_remove_flag(base_vha); |
| cancel_work_sync(&ha->board_disable); |
| |
| /* |
| * If the PCI device is disabled then there was a PCI-disconnect and |
| * qla2x00_disable_board_on_pci_error has taken care of most of the |
| * resources. |
| */ |
| if (!atomic_read(&pdev->enable_cnt)) { |
| dma_free_coherent(&ha->pdev->dev, base_vha->gnl.size, |
| base_vha->gnl.l, base_vha->gnl.ldma); |
| base_vha->gnl.l = NULL; |
| scsi_host_put(base_vha->host); |
| kfree(ha); |
| pci_set_drvdata(pdev, NULL); |
| return; |
| } |
| qla2x00_wait_for_hba_ready(base_vha); |
| |
| if (IS_QLA25XX(ha) || IS_QLA2031(ha) || IS_QLA27XX(ha) || |
| IS_QLA28XX(ha)) { |
| if (ha->flags.fw_started) |
| qla2x00_abort_isp_cleanup(base_vha); |
| } else if (!IS_QLAFX00(ha)) { |
| if (IS_QLA8031(ha)) { |
| ql_dbg(ql_dbg_p3p, base_vha, 0xb07e, |
| "Clearing fcoe driver presence.\n"); |
| if (qla83xx_clear_drv_presence(base_vha) != QLA_SUCCESS) |
| ql_dbg(ql_dbg_p3p, base_vha, 0xb079, |
| "Error while clearing DRV-Presence.\n"); |
| } |
| |
| qla2x00_try_to_stop_firmware(base_vha); |
| } |
| |
| qla2x00_wait_for_sess_deletion(base_vha); |
| |
| /* |
| * if UNLOAD flag is already set, then continue unload, |
| * where it was set first. |
| */ |
| if (test_bit(UNLOADING, &base_vha->dpc_flags)) |
| return; |
| |
| set_bit(UNLOADING, &base_vha->dpc_flags); |
| |
| qla_nvme_delete(base_vha); |
| |
| dma_free_coherent(&ha->pdev->dev, |
| base_vha->gnl.size, base_vha->gnl.l, base_vha->gnl.ldma); |
| |
| base_vha->gnl.l = NULL; |
| |
| vfree(base_vha->scan.l); |
| |
| if (IS_QLAFX00(ha)) |
| qlafx00_driver_shutdown(base_vha, 20); |
| |
| qla2x00_delete_all_vps(ha, base_vha); |
| |
| qla2x00_dfs_remove(base_vha); |
| |
| qla84xx_put_chip(base_vha); |
| |
| /* Disable timer */ |
| if (base_vha->timer_active) |
| qla2x00_stop_timer(base_vha); |
| |
| base_vha->flags.online = 0; |
| |
| /* free DMA memory */ |
| if (ha->exlogin_buf) |
| qla2x00_free_exlogin_buffer(ha); |
| |
| /* free DMA memory */ |
| if (ha->exchoffld_buf) |
| qla2x00_free_exchoffld_buffer(ha); |
| |
| qla2x00_destroy_deferred_work(ha); |
| |
| qlt_remove_target(ha, base_vha); |
| |
| qla2x00_free_sysfs_attr(base_vha, true); |
| |
| fc_remove_host(base_vha->host); |
| qlt_remove_target_resources(ha); |
| |
| scsi_remove_host(base_vha->host); |
| |
| qla2x00_free_device(base_vha); |
| |
| qla2x00_clear_drv_active(ha); |
| |
| scsi_host_put(base_vha->host); |
| |
| qla2x00_unmap_iobases(ha); |
| |
| pci_release_selected_regions(ha->pdev, ha->bars); |
| kfree(ha); |
| |
| pci_disable_pcie_error_reporting(pdev); |
| |
| pci_disable_device(pdev); |
| } |
| |
| static void |
| qla2x00_free_device(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| |
| qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16); |
| |
| /* Disable timer */ |
| if (vha->timer_active) |
| qla2x00_stop_timer(vha); |
| |
| qla25xx_delete_queues(vha); |
| vha->flags.online = 0; |
| |
| /* turn-off interrupts on the card */ |
| if (ha->interrupts_on) { |
| vha->flags.init_done = 0; |
| ha->isp_ops->disable_intrs(ha); |
| } |
| |
| qla2x00_free_fcports(vha); |
| |
| qla2x00_free_irqs(vha); |
| |
| /* Flush the work queue and remove it */ |
| if (ha->wq) { |
| flush_workqueue(ha->wq); |
| destroy_workqueue(ha->wq); |
| ha->wq = NULL; |
| } |
| |
| |
| qla2x00_mem_free(ha); |
| |
| qla82xx_md_free(vha); |
| |
| qla2x00_free_queues(ha); |
| } |
| |
| void qla2x00_free_fcports(struct scsi_qla_host *vha) |
| { |
| fc_port_t *fcport, *tfcport; |
| |
| list_for_each_entry_safe(fcport, tfcport, &vha->vp_fcports, list) |
| qla2x00_free_fcport(fcport); |
| } |
| |
| static inline void |
| qla2x00_schedule_rport_del(struct scsi_qla_host *vha, fc_port_t *fcport, |
| int defer) |
| { |
| struct fc_rport *rport; |
| scsi_qla_host_t *base_vha; |
| unsigned long flags; |
| |
| if (!fcport->rport) |
| return; |
| |
| rport = fcport->rport; |
| if (defer) { |
| base_vha = pci_get_drvdata(vha->hw->pdev); |
| spin_lock_irqsave(vha->host->host_lock, flags); |
| fcport->drport = rport; |
| spin_unlock_irqrestore(vha->host->host_lock, flags); |
| qlt_do_generation_tick(vha, &base_vha->total_fcport_update_gen); |
| set_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags); |
| qla2xxx_wake_dpc(base_vha); |
| } else { |
| int now; |
| |
| if (rport) { |
| ql_dbg(ql_dbg_disc, fcport->vha, 0x2109, |
| "%s %8phN. rport %p roles %x\n", |
| __func__, fcport->port_name, rport, |
| rport->roles); |
| fc_remote_port_delete(rport); |
| } |
| qlt_do_generation_tick(vha, &now); |
| } |
| } |
| |
| /* |
| * qla2x00_mark_device_lost Updates fcport state when device goes offline. |
| * |
| * Input: ha = adapter block pointer. fcport = port structure pointer. |
| * |
| * Return: None. |
| * |
| * Context: |
| */ |
| void qla2x00_mark_device_lost(scsi_qla_host_t *vha, fc_port_t *fcport, |
| int do_login, int defer) |
| { |
| if (IS_QLAFX00(vha->hw)) { |
| qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST); |
| qla2x00_schedule_rport_del(vha, fcport, defer); |
| return; |
| } |
| |
| if (atomic_read(&fcport->state) == FCS_ONLINE && |
| vha->vp_idx == fcport->vha->vp_idx) { |
| qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST); |
| qla2x00_schedule_rport_del(vha, fcport, defer); |
| } |
| /* |
| * We may need to retry the login, so don't change the state of the |
| * port but do the retries. |
| */ |
| if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD) |
| qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST); |
| |
| if (!do_login) |
| return; |
| |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| } |
| |
| /* |
| * qla2x00_mark_all_devices_lost |
| * Updates fcport state when device goes offline. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * fcport = port structure pointer. |
| * |
| * Return: |
| * None. |
| * |
| * Context: |
| */ |
| void |
| qla2x00_mark_all_devices_lost(scsi_qla_host_t *vha, int defer) |
| { |
| fc_port_t *fcport; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20f1, |
| "Mark all dev lost\n"); |
| |
| list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| fcport->scan_state = 0; |
| qlt_schedule_sess_for_deletion(fcport); |
| |
| if (vha->vp_idx != 0 && vha->vp_idx != fcport->vha->vp_idx) |
| continue; |
| |
| /* |
| * No point in marking the device as lost, if the device is |
| * already DEAD. |
| */ |
| if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD) |
| continue; |
| if (atomic_read(&fcport->state) == FCS_ONLINE) { |
| qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST); |
| if (defer) |
| qla2x00_schedule_rport_del(vha, fcport, defer); |
| else if (vha->vp_idx == fcport->vha->vp_idx) |
| qla2x00_schedule_rport_del(vha, fcport, defer); |
| } |
| } |
| } |
| |
| static void qla2x00_set_reserved_loop_ids(struct qla_hw_data *ha) |
| { |
| int i; |
| |
| if (IS_FWI2_CAPABLE(ha)) |
| return; |
| |
| for (i = 0; i < SNS_FIRST_LOOP_ID; i++) |
| set_bit(i, ha->loop_id_map); |
| set_bit(MANAGEMENT_SERVER, ha->loop_id_map); |
| set_bit(BROADCAST, ha->loop_id_map); |
| } |
| |
| /* |
| * qla2x00_mem_alloc |
| * Allocates adapter memory. |
| * |
| * Returns: |
| * 0 = success. |
| * !0 = failure. |
| */ |
| static int |
| qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, |
| struct req_que **req, struct rsp_que **rsp) |
| { |
| char name[16]; |
| |
| ha->init_cb = dma_alloc_coherent(&ha->pdev->dev, ha->init_cb_size, |
| &ha->init_cb_dma, GFP_KERNEL); |
| if (!ha->init_cb) |
| goto fail; |
| |
| if (qlt_mem_alloc(ha) < 0) |
| goto fail_free_init_cb; |
| |
| ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, |
| qla2x00_gid_list_size(ha), &ha->gid_list_dma, GFP_KERNEL); |
| if (!ha->gid_list) |
| goto fail_free_tgt_mem; |
| |
| ha->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep); |
| if (!ha->srb_mempool) |
| goto fail_free_gid_list; |
| |
| if (IS_P3P_TYPE(ha)) { |
| /* Allocate cache for CT6 Ctx. */ |
| if (!ctx_cachep) { |
| ctx_cachep = kmem_cache_create("qla2xxx_ctx", |
| sizeof(struct ct6_dsd), 0, |
| SLAB_HWCACHE_ALIGN, NULL); |
| if (!ctx_cachep) |
| goto fail_free_srb_mempool; |
| } |
| ha->ctx_mempool = mempool_create_slab_pool(SRB_MIN_REQ, |
| ctx_cachep); |
| if (!ha->ctx_mempool) |
| goto fail_free_srb_mempool; |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0021, |
| "ctx_cachep=%p ctx_mempool=%p.\n", |
| ctx_cachep, ha->ctx_mempool); |
| } |
| |
| /* Get memory for cached NVRAM */ |
| ha->nvram = kzalloc(MAX_NVRAM_SIZE, GFP_KERNEL); |
| if (!ha->nvram) |
| goto fail_free_ctx_mempool; |
| |
| snprintf(name, sizeof(name), "%s_%d", QLA2XXX_DRIVER_NAME, |
| ha->pdev->device); |
| ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev, |
| DMA_POOL_SIZE, 8, 0); |
| if (!ha->s_dma_pool) |
| goto fail_free_nvram; |
| |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0022, |
| "init_cb=%p gid_list=%p, srb_mempool=%p s_dma_pool=%p.\n", |
| ha->init_cb, ha->gid_list, ha->srb_mempool, ha->s_dma_pool); |
| |
| if (IS_P3P_TYPE(ha) || ql2xenabledif) { |
| ha->dl_dma_pool = dma_pool_create(name, &ha->pdev->dev, |
| DSD_LIST_DMA_POOL_SIZE, 8, 0); |
| if (!ha->dl_dma_pool) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0x0023, |
| "Failed to allocate memory for dl_dma_pool.\n"); |
| goto fail_s_dma_pool; |
| } |
| |
| ha->fcp_cmnd_dma_pool = dma_pool_create(name, &ha->pdev->dev, |
| FCP_CMND_DMA_POOL_SIZE, 8, 0); |
| if (!ha->fcp_cmnd_dma_pool) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0x0024, |
| "Failed to allocate memory for fcp_cmnd_dma_pool.\n"); |
| goto fail_dl_dma_pool; |
| } |
| |
| if (ql2xenabledif) { |
| u64 bufsize = DIF_BUNDLING_DMA_POOL_SIZE; |
| struct dsd_dma *dsd, *nxt; |
| uint i; |
| /* Creata a DMA pool of buffers for DIF bundling */ |
| ha->dif_bundl_pool = dma_pool_create(name, |
| &ha->pdev->dev, DIF_BUNDLING_DMA_POOL_SIZE, 8, 0); |
| if (!ha->dif_bundl_pool) { |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0024, |
| "%s: failed create dif_bundl_pool\n", |
| __func__); |
| goto fail_dif_bundl_dma_pool; |
| } |
| |
| INIT_LIST_HEAD(&ha->pool.good.head); |
| INIT_LIST_HEAD(&ha->pool.unusable.head); |
| ha->pool.good.count = 0; |
| ha->pool.unusable.count = 0; |
| for (i = 0; i < 128; i++) { |
| dsd = kzalloc(sizeof(*dsd), GFP_ATOMIC); |
| if (!dsd) { |
| ql_dbg_pci(ql_dbg_init, ha->pdev, |
| 0xe0ee, "%s: failed alloc dsd\n", |
| __func__); |
| return 1; |
| } |
| ha->dif_bundle_kallocs++; |
| |
| dsd->dsd_addr = dma_pool_alloc( |
| ha->dif_bundl_pool, GFP_ATOMIC, |
| &dsd->dsd_list_dma); |
| if (!dsd->dsd_addr) { |
| ql_dbg_pci(ql_dbg_init, ha->pdev, |
| 0xe0ee, |
| "%s: failed alloc ->dsd_addr\n", |
| __func__); |
| kfree(dsd); |
| ha->dif_bundle_kallocs--; |
| continue; |
| } |
| ha->dif_bundle_dma_allocs++; |
| |
| /* |
| * if DMA buffer crosses 4G boundary, |
| * put it on bad list |
| */ |
| if (MSD(dsd->dsd_list_dma) ^ |
| MSD(dsd->dsd_list_dma + bufsize)) { |
| list_add_tail(&dsd->list, |
| &ha->pool.unusable.head); |
| ha->pool.unusable.count++; |
| } else { |
| list_add_tail(&dsd->list, |
| &ha->pool.good.head); |
| ha->pool.good.count++; |
| } |
| } |
| |
| /* return the good ones back to the pool */ |
| list_for_each_entry_safe(dsd, nxt, |
| &ha->pool.good.head, list) { |
| list_del(&dsd->list); |
| dma_pool_free(ha->dif_bundl_pool, |
| dsd->dsd_addr, dsd->dsd_list_dma); |
| ha->dif_bundle_dma_allocs--; |
| kfree(dsd); |
| ha->dif_bundle_kallocs--; |
| } |
| |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0024, |
| "%s: dif dma pool (good=%u unusable=%u)\n", |
| __func__, ha->pool.good.count, |
| ha->pool.unusable.count); |
| } |
| |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0025, |
| "dl_dma_pool=%p fcp_cmnd_dma_pool=%p dif_bundl_pool=%p.\n", |
| ha->dl_dma_pool, ha->fcp_cmnd_dma_pool, |
| ha->dif_bundl_pool); |
| } |
| |
| /* Allocate memory for SNS commands */ |
| if (IS_QLA2100(ha) || IS_QLA2200(ha)) { |
| /* Get consistent memory allocated for SNS commands */ |
| ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev, |
| sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma, GFP_KERNEL); |
| if (!ha->sns_cmd) |
| goto fail_dma_pool; |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0026, |
| "sns_cmd: %p.\n", ha->sns_cmd); |
| } else { |
| /* Get consistent memory allocated for MS IOCB */ |
| ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, |
| &ha->ms_iocb_dma); |
| if (!ha->ms_iocb) |
| goto fail_dma_pool; |
| /* Get consistent memory allocated for CT SNS commands */ |
| ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev, |
| sizeof(struct ct_sns_pkt), &ha->ct_sns_dma, GFP_KERNEL); |
| if (!ha->ct_sns) |
| goto fail_free_ms_iocb; |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0027, |
| "ms_iocb=%p ct_sns=%p.\n", |
| ha->ms_iocb, ha->ct_sns); |
| } |
| |
| /* Allocate memory for request ring */ |
| *req = kzalloc(sizeof(struct req_que), GFP_KERNEL); |
| if (!*req) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0x0028, |
| "Failed to allocate memory for req.\n"); |
| goto fail_req; |
| } |
| (*req)->length = req_len; |
| (*req)->ring = dma_alloc_coherent(&ha->pdev->dev, |
| ((*req)->length + 1) * sizeof(request_t), |
| &(*req)->dma, GFP_KERNEL); |
| if (!(*req)->ring) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0x0029, |
| "Failed to allocate memory for req_ring.\n"); |
| goto fail_req_ring; |
| } |
| /* Allocate memory for response ring */ |
| *rsp = kzalloc(sizeof(struct rsp_que), GFP_KERNEL); |
| if (!*rsp) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0x002a, |
| "Failed to allocate memory for rsp.\n"); |
| goto fail_rsp; |
| } |
| (*rsp)->hw = ha; |
| (*rsp)->length = rsp_len; |
| (*rsp)->ring = dma_alloc_coherent(&ha->pdev->dev, |
| ((*rsp)->length + 1) * sizeof(response_t), |
| &(*rsp)->dma, GFP_KERNEL); |
| if (!(*rsp)->ring) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0x002b, |
| "Failed to allocate memory for rsp_ring.\n"); |
| goto fail_rsp_ring; |
| } |
| (*req)->rsp = *rsp; |
| (*rsp)->req = *req; |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x002c, |
| "req=%p req->length=%d req->ring=%p rsp=%p " |
| "rsp->length=%d rsp->ring=%p.\n", |
| *req, (*req)->length, (*req)->ring, *rsp, (*rsp)->length, |
| (*rsp)->ring); |
| /* Allocate memory for NVRAM data for vports */ |
| if (ha->nvram_npiv_size) { |
| ha->npiv_info = kcalloc(ha->nvram_npiv_size, |
| sizeof(struct qla_npiv_entry), |
| GFP_KERNEL); |
| if (!ha->npiv_info) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0x002d, |
| "Failed to allocate memory for npiv_info.\n"); |
| goto fail_npiv_info; |
| } |
| } else |
| ha->npiv_info = NULL; |
| |
| /* Get consistent memory allocated for EX-INIT-CB. */ |
| if (IS_CNA_CAPABLE(ha) || IS_QLA2031(ha) || IS_QLA27XX(ha) || |
| IS_QLA28XX(ha)) { |
| ha->ex_init_cb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, |
| &ha->ex_init_cb_dma); |
| if (!ha->ex_init_cb) |
| goto fail_ex_init_cb; |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x002e, |
| "ex_init_cb=%p.\n", ha->ex_init_cb); |
| } |
| |
| INIT_LIST_HEAD(&ha->gbl_dsd_list); |
| |
| /* Get consistent memory allocated for Async Port-Database. */ |
| if (!IS_FWI2_CAPABLE(ha)) { |
| ha->async_pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, |
| &ha->async_pd_dma); |
| if (!ha->async_pd) |
| goto fail_async_pd; |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x002f, |
| "async_pd=%p.\n", ha->async_pd); |
| } |
| |
| INIT_LIST_HEAD(&ha->vp_list); |
| |
| /* Allocate memory for our loop_id bitmap */ |
| ha->loop_id_map = kcalloc(BITS_TO_LONGS(LOOPID_MAP_SIZE), |
| sizeof(long), |
| GFP_KERNEL); |
| if (!ha->loop_id_map) |
| goto fail_loop_id_map; |
| else { |
| qla2x00_set_reserved_loop_ids(ha); |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0123, |
| "loop_id_map=%p.\n", ha->loop_id_map); |
| } |
| |
| ha->sfp_data = dma_alloc_coherent(&ha->pdev->dev, |
| SFP_DEV_SIZE, &ha->sfp_data_dma, GFP_KERNEL); |
| if (!ha->sfp_data) { |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x011b, |
| "Unable to allocate memory for SFP read-data.\n"); |
| goto fail_sfp_data; |
| } |
| |
| ha->flt = dma_alloc_coherent(&ha->pdev->dev, |
| sizeof(struct qla_flt_header) + FLT_REGIONS_SIZE, &ha->flt_dma, |
| GFP_KERNEL); |
| if (!ha->flt) { |
| ql_dbg_pci(ql_dbg_init, ha->pdev, 0x011b, |
| "Unable to allocate memory for FLT.\n"); |
| goto fail_flt_buffer; |
| } |
| |
| return 0; |
| |
| fail_flt_buffer: |
| dma_free_coherent(&ha->pdev->dev, SFP_DEV_SIZE, |
| ha->sfp_data, ha->sfp_data_dma); |
| fail_sfp_data: |
| kfree(ha->loop_id_map); |
| fail_loop_id_map: |
| dma_pool_free(ha->s_dma_pool, ha->async_pd, ha->async_pd_dma); |
| fail_async_pd: |
| dma_pool_free(ha->s_dma_pool, ha->ex_init_cb, ha->ex_init_cb_dma); |
| fail_ex_init_cb: |
| kfree(ha->npiv_info); |
| fail_npiv_info: |
| dma_free_coherent(&ha->pdev->dev, ((*rsp)->length + 1) * |
| sizeof(response_t), (*rsp)->ring, (*rsp)->dma); |
| (*rsp)->ring = NULL; |
| (*rsp)->dma = 0; |
| fail_rsp_ring: |
| kfree(*rsp); |
| *rsp = NULL; |
| fail_rsp: |
| dma_free_coherent(&ha->pdev->dev, ((*req)->length + 1) * |
| sizeof(request_t), (*req)->ring, (*req)->dma); |
| (*req)->ring = NULL; |
| (*req)->dma = 0; |
| fail_req_ring: |
| kfree(*req); |
| *req = NULL; |
| fail_req: |
| dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt), |
| ha->ct_sns, ha->ct_sns_dma); |
| ha->ct_sns = NULL; |
| ha->ct_sns_dma = 0; |
| fail_free_ms_iocb: |
| dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma); |
| ha->ms_iocb = NULL; |
| ha->ms_iocb_dma = 0; |
| |
| if (ha->sns_cmd) |
| dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt), |
| ha->sns_cmd, ha->sns_cmd_dma); |
| fail_dma_pool: |
| if (ql2xenabledif) { |
| struct dsd_dma *dsd, *nxt; |
| |
| list_for_each_entry_safe(dsd, nxt, &ha->pool.unusable.head, |
| list) { |
| list_del(&dsd->list); |
| dma_pool_free(ha->dif_bundl_pool, dsd->dsd_addr, |
| dsd->dsd_list_dma); |
| ha->dif_bundle_dma_allocs--; |
| kfree(dsd); |
| ha->dif_bundle_kallocs--; |
| ha->pool.unusable.count--; |
| } |
| dma_pool_destroy(ha->dif_bundl_pool); |
| ha->dif_bundl_pool = NULL; |
| } |
| |
| fail_dif_bundl_dma_pool: |
| if (IS_QLA82XX(ha) || ql2xenabledif) { |
| dma_pool_destroy(ha->fcp_cmnd_dma_pool); |
| ha->fcp_cmnd_dma_pool = NULL; |
| } |
| fail_dl_dma_pool: |
| if (IS_QLA82XX(ha) || ql2xenabledif) { |
| dma_pool_destroy(ha->dl_dma_pool); |
| ha->dl_dma_pool = NULL; |
| } |
| fail_s_dma_pool: |
| dma_pool_destroy(ha->s_dma_pool); |
| ha->s_dma_pool = NULL; |
| fail_free_nvram: |
| kfree(ha->nvram); |
| ha->nvram = NULL; |
| fail_free_ctx_mempool: |
| mempool_destroy(ha->ctx_mempool); |
| ha->ctx_mempool = NULL; |
| fail_free_srb_mempool: |
| mempool_destroy(ha->srb_mempool); |
| ha->srb_mempool = NULL; |
| fail_free_gid_list: |
| dma_free_coherent(&ha->pdev->dev, qla2x00_gid_list_size(ha), |
| ha->gid_list, |
| ha->gid_list_dma); |
| ha->gid_list = NULL; |
| ha->gid_list_dma = 0; |
| fail_free_tgt_mem: |
| qlt_mem_free(ha); |
| fail_free_init_cb: |
| dma_free_coherent(&ha->pdev->dev, ha->init_cb_size, ha->init_cb, |
| ha->init_cb_dma); |
| ha->init_cb = NULL; |
| ha->init_cb_dma = 0; |
| fail: |
| ql_log(ql_log_fatal, NULL, 0x0030, |
| "Memory allocation failure.\n"); |
| return -ENOMEM; |
| } |
| |
| int |
| qla2x00_set_exlogins_buffer(scsi_qla_host_t *vha) |
| { |
| int rval; |
| uint16_t size, max_cnt, temp; |
| struct qla_hw_data *ha = vha->hw; |
| |
| /* Return if we don't need to alloacate any extended logins */ |
| if (!ql2xexlogins) |
| return QLA_SUCCESS; |
| |
| if (!IS_EXLOGIN_OFFLD_CAPABLE(ha)) |
| return QLA_SUCCESS; |
| |
| ql_log(ql_log_info, vha, 0xd021, "EXLOGIN count: %d.\n", ql2xexlogins); |
| max_cnt = 0; |
| rval = qla_get_exlogin_status(vha, &size, &max_cnt); |
| if (rval != QLA_SUCCESS) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0xd029, |
| "Failed to get exlogin status.\n"); |
| return rval; |
| } |
| |
| temp = (ql2xexlogins > max_cnt) ? max_cnt : ql2xexlogins; |
| temp *= size; |
| |
| if (temp != ha->exlogin_size) { |
| qla2x00_free_exlogin_buffer(ha); |
| ha->exlogin_size = temp; |
| |
| ql_log(ql_log_info, vha, 0xd024, |
| "EXLOGIN: max_logins=%d, portdb=0x%x, total=%d.\n", |
| max_cnt, size, temp); |
| |
| ql_log(ql_log_info, vha, 0xd025, |
| "EXLOGIN: requested size=0x%x\n", ha->exlogin_size); |
| |
| /* Get consistent memory for extended logins */ |
| ha->exlogin_buf = dma_alloc_coherent(&ha->pdev->dev, |
| ha->exlogin_size, &ha->exlogin_buf_dma, GFP_KERNEL); |
| if (!ha->exlogin_buf) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0xd02a, |
| "Failed to allocate memory for exlogin_buf_dma.\n"); |
| return -ENOMEM; |
| } |
| } |
| |
| /* Now configure the dma buffer */ |
| rval = qla_set_exlogin_mem_cfg(vha, ha->exlogin_buf_dma); |
| if (rval) { |
| ql_log(ql_log_fatal, vha, 0xd033, |
| "Setup extended login buffer ****FAILED****.\n"); |
| qla2x00_free_exlogin_buffer(ha); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_free_exlogin_buffer |
| * |
| * Input: |
| * ha = adapter block pointer |
| */ |
| void |
| qla2x00_free_exlogin_buffer(struct qla_hw_data *ha) |
| { |
| if (ha->exlogin_buf) { |
| dma_free_coherent(&ha->pdev->dev, ha->exlogin_size, |
| ha->exlogin_buf, ha->exlogin_buf_dma); |
| ha->exlogin_buf = NULL; |
| ha->exlogin_size = 0; |
| } |
| } |
| |
| static void |
| qla2x00_number_of_exch(scsi_qla_host_t *vha, u32 *ret_cnt, u16 max_cnt) |
| { |
| u32 temp; |
| struct init_cb_81xx *icb = (struct init_cb_81xx *)&vha->hw->init_cb; |
| *ret_cnt = FW_DEF_EXCHANGES_CNT; |
| |
| if (max_cnt > vha->hw->max_exchg) |
| max_cnt = vha->hw->max_exchg; |
| |
| if (qla_ini_mode_enabled(vha)) { |
| if (vha->ql2xiniexchg > max_cnt) |
| vha->ql2xiniexchg = max_cnt; |
| |
| if (vha->ql2xiniexchg > FW_DEF_EXCHANGES_CNT) |
| *ret_cnt = vha->ql2xiniexchg; |
| |
| } else if (qla_tgt_mode_enabled(vha)) { |
| if (vha->ql2xexchoffld > max_cnt) { |
| vha->ql2xexchoffld = max_cnt; |
| icb->exchange_count = cpu_to_le16(vha->ql2xexchoffld); |
| } |
| |
| if (vha->ql2xexchoffld > FW_DEF_EXCHANGES_CNT) |
| *ret_cnt = vha->ql2xexchoffld; |
| } else if (qla_dual_mode_enabled(vha)) { |
| temp = vha->ql2xiniexchg + vha->ql2xexchoffld; |
| if (temp > max_cnt) { |
| vha->ql2xiniexchg -= (temp - max_cnt)/2; |
| vha->ql2xexchoffld -= (((temp - max_cnt)/2) + 1); |
| temp = max_cnt; |
| icb->exchange_count = cpu_to_le16(vha->ql2xexchoffld); |
| } |
| |
| if (temp > FW_DEF_EXCHANGES_CNT) |
| *ret_cnt = temp; |
| } |
| } |
| |
| int |
| qla2x00_set_exchoffld_buffer(scsi_qla_host_t *vha) |
| { |
| int rval; |
| u16 size, max_cnt; |
| u32 actual_cnt, totsz; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (!ha->flags.exchoffld_enabled) |
| return QLA_SUCCESS; |
| |
| if (!IS_EXCHG_OFFLD_CAPABLE(ha)) |
| return QLA_SUCCESS; |
| |
| max_cnt = 0; |
| rval = qla_get_exchoffld_status(vha, &size, &max_cnt); |
| if (rval != QLA_SUCCESS) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0xd012, |
| "Failed to get exlogin status.\n"); |
| return rval; |
| } |
| |
| qla2x00_number_of_exch(vha, &actual_cnt, max_cnt); |
| ql_log(ql_log_info, vha, 0xd014, |
| "Actual exchange offload count: %d.\n", actual_cnt); |
| |
| totsz = actual_cnt * size; |
| |
| if (totsz != ha->exchoffld_size) { |
| qla2x00_free_exchoffld_buffer(ha); |
| if (actual_cnt <= FW_DEF_EXCHANGES_CNT) { |
| ha->exchoffld_size = 0; |
| ha->flags.exchoffld_enabled = 0; |
| return QLA_SUCCESS; |
| } |
| |
| ha->exchoffld_size = totsz; |
| |
| ql_log(ql_log_info, vha, 0xd016, |
| "Exchange offload: max_count=%d, actual count=%d entry sz=0x%x, total sz=0x%x\n", |
| max_cnt, actual_cnt, size, totsz); |
| |
| ql_log(ql_log_info, vha, 0xd017, |
| "Exchange Buffers requested size = 0x%x\n", |
| ha->exchoffld_size); |
| |
| /* Get consistent memory for extended logins */ |
| ha->exchoffld_buf = dma_alloc_coherent(&ha->pdev->dev, |
| ha->exchoffld_size, &ha->exchoffld_buf_dma, GFP_KERNEL); |
| if (!ha->exchoffld_buf) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0xd013, |
| "Failed to allocate memory for Exchange Offload.\n"); |
| |
| if (ha->max_exchg > |
| (FW_DEF_EXCHANGES_CNT + REDUCE_EXCHANGES_CNT)) { |
| ha->max_exchg -= REDUCE_EXCHANGES_CNT; |
| } else if (ha->max_exchg > |
| (FW_DEF_EXCHANGES_CNT + 512)) { |
| ha->max_exchg -= 512; |
| } else { |
| ha->flags.exchoffld_enabled = 0; |
| ql_log_pci(ql_log_fatal, ha->pdev, 0xd013, |
| "Disabling Exchange offload due to lack of memory\n"); |
| } |
| ha->exchoffld_size = 0; |
| |
| return -ENOMEM; |
| } |
| } else if (!ha->exchoffld_buf || (actual_cnt <= FW_DEF_EXCHANGES_CNT)) { |
| /* pathological case */ |
| qla2x00_free_exchoffld_buffer(ha); |
| ha->exchoffld_size = 0; |
| ha->flags.exchoffld_enabled = 0; |
| ql_log(ql_log_info, vha, 0xd016, |
| "Exchange offload not enable: offld size=%d, actual count=%d entry sz=0x%x, total sz=0x%x.\n", |
| ha->exchoffld_size, actual_cnt, size, totsz); |
| return 0; |
| } |
| |
| /* Now configure the dma buffer */ |
| rval = qla_set_exchoffld_mem_cfg(vha); |
| if (rval) { |
| ql_log(ql_log_fatal, vha, 0xd02e, |
| "Setup exchange offload buffer ****FAILED****.\n"); |
| qla2x00_free_exchoffld_buffer(ha); |
| } else { |
| /* re-adjust number of target exchange */ |
| struct init_cb_81xx *icb = (struct init_cb_81xx *)ha->init_cb; |
| |
| if (qla_ini_mode_enabled(vha)) |
| icb->exchange_count = 0; |
| else |
| icb->exchange_count = cpu_to_le16(vha->ql2xexchoffld); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_free_exchoffld_buffer |
| * |
| * Input: |
| * ha = adapter block pointer |
| */ |
| void |
| qla2x00_free_exchoffld_buffer(struct qla_hw_data *ha) |
| { |
| if (ha->exchoffld_buf) { |
| dma_free_coherent(&ha->pdev->dev, ha->exchoffld_size, |
| ha->exchoffld_buf, ha->exchoffld_buf_dma); |
| ha->exchoffld_buf = NULL; |
| ha->exchoffld_size = 0; |
| } |
| } |
| |
| /* |
| * qla2x00_free_fw_dump |
| * Frees fw dump stuff. |
| * |
| * Input: |
| * ha = adapter block pointer |
| */ |
| static void |
| qla2x00_free_fw_dump(struct qla_hw_data *ha) |
| { |
| struct fwdt *fwdt = ha->fwdt; |
| uint j; |
| |
| if (ha->fce) |
| dma_free_coherent(&ha->pdev->dev, |
| FCE_SIZE, ha->fce, ha->fce_dma); |
| |
| if (ha->eft) |
| dma_free_coherent(&ha->pdev->dev, |
| EFT_SIZE, ha->eft, ha->eft_dma); |
| |
| if (ha->fw_dump) |
| vfree(ha->fw_dump); |
| |
| ha->fce = NULL; |
| ha->fce_dma = 0; |
| ha->flags.fce_enabled = 0; |
| ha->eft = NULL; |
| ha->eft_dma = 0; |
| ha->fw_dumped = 0; |
| ha->fw_dump_cap_flags = 0; |
| ha->fw_dump_reading = 0; |
| ha->fw_dump = NULL; |
| ha->fw_dump_len = 0; |
| |
| for (j = 0; j < 2; j++, fwdt++) { |
| if (fwdt->template) |
| vfree(fwdt->template); |
| fwdt->template = NULL; |
| fwdt->length = 0; |
| } |
| } |
| |
| /* |
| * qla2x00_mem_free |
| * Frees all adapter allocated memory. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| */ |
| static void |
| qla2x00_mem_free(struct qla_hw_data *ha) |
| { |
| qla2x00_free_fw_dump(ha); |
| |
| if (ha->mctp_dump) |
| dma_free_coherent(&ha->pdev->dev, MCTP_DUMP_SIZE, ha->mctp_dump, |
| ha->mctp_dump_dma); |
| ha->mctp_dump = NULL; |
| |
| mempool_destroy(ha->srb_mempool); |
| ha->srb_mempool = NULL; |
| |
| if (ha->dcbx_tlv) |
| dma_free_coherent(&ha->pdev->dev, DCBX_TLV_DATA_SIZE, |
| ha->dcbx_tlv, ha->dcbx_tlv_dma); |
| ha->dcbx_tlv = NULL; |
| |
| if (ha->xgmac_data) |
| dma_free_coherent(&ha->pdev->dev, XGMAC_DATA_SIZE, |
| ha->xgmac_data, ha->xgmac_data_dma); |
| ha->xgmac_data = NULL; |
| |
| if (ha->sns_cmd) |
| dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt), |
| ha->sns_cmd, ha->sns_cmd_dma); |
| ha->sns_cmd = NULL; |
| ha->sns_cmd_dma = 0; |
| |
| if (ha->ct_sns) |
| dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt), |
| ha->ct_sns, ha->ct_sns_dma); |
| ha->ct_sns = NULL; |
| ha->ct_sns_dma = 0; |
| |
| if (ha->sfp_data) |
| dma_free_coherent(&ha->pdev->dev, SFP_DEV_SIZE, ha->sfp_data, |
| ha->sfp_data_dma); |
| ha->sfp_data = NULL; |
| |
| if (ha->flt) |
| dma_free_coherent(&ha->pdev->dev, |
| sizeof(struct qla_flt_header) + FLT_REGIONS_SIZE, |
| ha->flt, ha->flt_dma); |
| ha->flt = NULL; |
| ha->flt_dma = 0; |
| |
| if (ha->ms_iocb) |
| dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma); |
| ha->ms_iocb = NULL; |
| ha->ms_iocb_dma = 0; |
| |
| if (ha->ex_init_cb) |
| dma_pool_free(ha->s_dma_pool, |
| ha->ex_init_cb, ha->ex_init_cb_dma); |
| ha->ex_init_cb = NULL; |
| ha->ex_init_cb_dma = 0; |
| |
| if (ha->async_pd) |
| dma_pool_free(ha->s_dma_pool, ha->async_pd, ha->async_pd_dma); |
| ha->async_pd = NULL; |
| ha->async_pd_dma = 0; |
| |
| dma_pool_destroy(ha->s_dma_pool); |
| ha->s_dma_pool = NULL; |
| |
| if (ha->gid_list) |
| dma_free_coherent(&ha->pdev->dev, qla2x00_gid_list_size(ha), |
| ha->gid_list, ha->gid_list_dma); |
| ha->gid_list = NULL; |
| ha->gid_list_dma = 0; |
| |
| if (IS_QLA82XX(ha)) { |
| if (!list_empty(&ha->gbl_dsd_list)) { |
| struct dsd_dma *dsd_ptr, *tdsd_ptr; |
| |
| /* clean up allocated prev pool */ |
| list_for_each_entry_safe(dsd_ptr, |
| tdsd_ptr, &ha->gbl_dsd_list, list) { |
| dma_pool_free(ha->dl_dma_pool, |
| dsd_ptr->dsd_addr, dsd_ptr->dsd_list_dma); |
| list_del(&dsd_ptr->list); |
| kfree(dsd_ptr); |
| } |
| } |
| } |
| |
| dma_pool_destroy(ha->dl_dma_pool); |
| ha->dl_dma_pool = NULL; |
| |
| dma_pool_destroy(ha->fcp_cmnd_dma_pool); |
| ha->fcp_cmnd_dma_pool = NULL; |
| |
| mempool_destroy(ha->ctx_mempool); |
| ha->ctx_mempool = NULL; |
| |
| if (ql2xenabledif && ha->dif_bundl_pool) { |
| struct dsd_dma *dsd, *nxt; |
| |
| list_for_each_entry_safe(dsd, nxt, &ha->pool.unusable.head, |
| list) { |
| list_del(&dsd->list); |
| dma_pool_free(ha->dif_bundl_pool, dsd->dsd_addr, |
| dsd->dsd_list_dma); |
| ha->dif_bundle_dma_allocs--; |
| kfree(dsd); |
| ha->dif_bundle_kallocs--; |
| ha->pool.unusable.count--; |
| } |
| list_for_each_entry_safe(dsd, nxt, &ha->pool.good.head, list) { |
| list_del(&dsd->list); |
| dma_pool_free(ha->dif_bundl_pool, dsd->dsd_addr, |
| dsd->dsd_list_dma); |
| ha->dif_bundle_dma_allocs--; |
| kfree(dsd); |
| ha->dif_bundle_kallocs--; |
| } |
| } |
| |
| dma_pool_destroy(ha->dif_bundl_pool); |
| ha->dif_bundl_pool = NULL; |
| |
| qlt_mem_free(ha); |
| |
| if (ha->init_cb) |
| dma_free_coherent(&ha->pdev->dev, ha->init_cb_size, |
| ha->init_cb, ha->init_cb_dma); |
| ha->init_cb = NULL; |
| ha->init_cb_dma = 0; |
| |
| vfree(ha->optrom_buffer); |
| ha->optrom_buffer = NULL; |
| kfree(ha->nvram); |
| ha->nvram = NULL; |
| kfree(ha->npiv_info); |
| ha->npiv_info = NULL; |
| kfree(ha->swl); |
| ha->swl = NULL; |
| kfree(ha->loop_id_map); |
| ha->loop_id_map = NULL; |
| } |
| |
| struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *sht, |
| struct qla_hw_data *ha) |
| { |
| struct Scsi_Host *host; |
| struct scsi_qla_host *vha = NULL; |
| |
| host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t)); |
| if (!host) { |
| ql_log_pci(ql_log_fatal, ha->pdev, 0x0107, |
| "Failed to allocate host from the scsi layer, aborting.\n"); |
| return NULL; |
| } |
| |
| /* Clear our data area */ |
| vha = shost_priv(host); |
| memset(vha, 0, sizeof(scsi_qla_host_t)); |
| |
| vha->host = host; |
| vha->host_no = host->host_no; |
| vha->hw = ha; |
| |
| vha->qlini_mode = ql2x_ini_mode; |
| vha->ql2xexchoffld = ql2xexchoffld; |
| vha->ql2xiniexchg = ql2xiniexchg; |
| |
| INIT_LIST_HEAD(&vha->vp_fcports); |
| INIT_LIST_HEAD(&vha->work_list); |
| INIT_LIST_HEAD(&vha->list); |
| INIT_LIST_HEAD(&vha->qla_cmd_list); |
| INIT_LIST_HEAD(&vha->qla_sess_op_cmd_list); |
| INIT_LIST_HEAD(&vha->logo_list); |
| INIT_LIST_HEAD(&vha->plogi_ack_list); |
| INIT_LIST_HEAD(&vha->qp_list); |
| INIT_LIST_HEAD(&vha->gnl.fcports); |
| INIT_LIST_HEAD(&vha->gpnid_list); |
| INIT_WORK(&vha->iocb_work, qla2x00_iocb_work_fn); |
| |
| spin_lock_init(&vha->work_lock); |
| spin_lock_init(&vha->cmd_list_lock); |
| init_waitqueue_head(&vha->fcport_waitQ); |
| init_waitqueue_head(&vha->vref_waitq); |
| |
| vha->gnl.size = sizeof(struct get_name_list_extended) * |
| (ha->max_loop_id + 1); |
| vha->gnl.l = dma_alloc_coherent(&ha->pdev->dev, |
| vha->gnl.size, &vha->gnl.ldma, GFP_KERNEL); |
| if (!vha->gnl.l) { |
| ql_log(ql_log_fatal, vha, 0xd04a, |
| "Alloc failed for name list.\n"); |
| scsi_host_put(vha->host); |
| return NULL; |
| } |
| |
| /* todo: what about ext login? */ |
| vha->scan.size = ha->max_fibre_devices * sizeof(struct fab_scan_rp); |
| vha->scan.l = vmalloc(vha->scan.size); |
| if (!vha->scan.l) { |
| ql_log(ql_log_fatal, vha, 0xd04a, |
| "Alloc failed for scan database.\n"); |
| dma_free_coherent(&ha->pdev->dev, vha->gnl.size, |
| vha->gnl.l, vha->gnl.ldma); |
| vha->gnl.l = NULL; |
| scsi_host_put(vha->host); |
| return NULL; |
| } |
| INIT_DELAYED_WORK(&vha->scan.scan_work, qla_scan_work_fn); |
| |
| sprintf(vha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, vha->host_no); |
| ql_dbg(ql_dbg_init, vha, 0x0041, |
| "Allocated the host=%p hw=%p vha=%p dev_name=%s", |
| vha->host, vha->hw, vha, |
| dev_name(&(ha->pdev->dev))); |
| |
| return vha; |
| } |
| |
| struct qla_work_evt * |
| qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type) |
| { |
| struct qla_work_evt *e; |
| uint8_t bail; |
| |
| QLA_VHA_MARK_BUSY(vha, bail); |
| if (bail) |
| return NULL; |
| |
| e = kzalloc(sizeof(struct qla_work_evt), GFP_ATOMIC); |
| if (!e) { |
| QLA_VHA_MARK_NOT_BUSY(vha); |
| return NULL; |
| } |
| |
| INIT_LIST_HEAD(&e->list); |
| e->type = type; |
| e->flags = QLA_EVT_FLAG_FREE; |
| return e; |
| } |
| |
| int |
| qla2x00_post_work(struct scsi_qla_host *vha, struct qla_work_evt *e) |
| { |
| unsigned long flags; |
| bool q = false; |
| |
| spin_lock_irqsave(&vha->work_lock, flags); |
| list_add_tail(&e->list, &vha->work_list); |
| |
| if (!test_and_set_bit(IOCB_WORK_ACTIVE, &vha->dpc_flags)) |
| q = true; |
| |
| spin_unlock_irqrestore(&vha->work_lock, flags); |
| |
| if (q) |
| queue_work(vha->hw->wq, &vha->iocb_work); |
| |
| return QLA_SUCCESS; |
| } |
| |
| int |
| qla2x00_post_aen_work(struct scsi_qla_host *vha, enum fc_host_event_code code, |
| u32 data) |
| { |
| struct qla_work_evt *e; |
| |
| e = qla2x00_alloc_work(vha, QLA_EVT_AEN); |
| if (!e) |
| return QLA_FUNCTION_FAILED; |
| |
| e->u.aen.code = code; |
| e->u.aen.data = data; |
| return qla2x00_post_work(vha, e); |
| } |
| |
| int |
| qla2x00_post_idc_ack_work(struct scsi_qla_host *vha, uint16_t *mb) |
| { |
| struct qla_work_evt *e; |
| |
| e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK); |
| if (!e) |
| return QLA_FUNCTION_FAILED; |
| |
| memcpy(e->u.idc_ack.mb, mb, QLA_IDC_ACK_REGS * sizeof(uint16_t)); |
| return qla2x00_post_work(vha, e); |
| } |
| |
| #define qla2x00_post_async_work(name, type) \ |
| int qla2x00_post_async_##name##_work( \ |
| struct scsi_qla_host *vha, \ |
| fc_port_t *fcport, uint16_t *data) \ |
| { \ |
| struct qla_work_evt *e; \ |
| \ |
| e = qla2x00_alloc_work(vha, type); \ |
| if (!e) \ |
| return QLA_FUNCTION_FAILED; \ |
| \ |
| e->u.logio.fcport = fcport; \ |
| if (data) { \ |
| e->u.logio.data[0] = data[0]; \ |
| e->u.logio.data[1] = data[1]; \ |
| } \ |
| fcport->flags |= FCF_ASYNC_ACTIVE; \ |
| return qla2x00_post_work(vha, e); \ |
| } |
| |
| qla2x00_post_async_work(login, QLA_EVT_ASYNC_LOGIN); |
| qla2x00_post_async_work(logout, QLA_EVT_ASYNC_LOGOUT); |
| qla2x00_post_async_work(logout_done, QLA_EVT_ASYNC_LOGOUT_DONE); |
| qla2x00_post_async_work(adisc, QLA_EVT_ASYNC_ADISC); |
| qla2x00_post_async_work(prlo, QLA_EVT_ASYNC_PRLO); |
| qla2x00_post_async_work(prlo_done, QLA_EVT_ASYNC_PRLO_DONE); |
| |
| int |
| qla2x00_post_uevent_work(struct scsi_qla_host *vha, u32 code) |
| { |
| struct qla_work_evt *e; |
| |
| e = qla2x00_alloc_work(vha, QLA_EVT_UEVENT); |
| if (!e) |
| return QLA_FUNCTION_FAILED; |
| |
| e->u.uevent.code = code; |
| return qla2x00_post_work(vha, e); |
| } |
| |
| static void |
| qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code) |
| { |
| char event_string[40]; |
| char *envp[] = { event_string, NULL }; |
| |
| switch (code) { |
| case QLA_UEVENT_CODE_FW_DUMP: |
| snprintf(event_string, sizeof(event_string), "FW_DUMP=%ld", |
| vha->host_no); |
| break; |
| default: |
| /* do nothing */ |
| break; |
| } |
| kobject_uevent_env(&vha->hw->pdev->dev.kobj, KOBJ_CHANGE, envp); |
| } |
| |
| int |
| qlafx00_post_aenfx_work(struct scsi_qla_host *vha, uint32_t evtcode, |
| uint32_t *data, int cnt) |
| { |
| struct qla_work_evt *e; |
| |
| e = qla2x00_alloc_work(vha, QLA_EVT_AENFX); |
| if (!e) |
| return QLA_FUNCTION_FAILED; |
| |
| e->u.aenfx.evtcode = evtcode; |
| e->u.aenfx.count = cnt; |
| memcpy(e->u.aenfx.mbx, data, sizeof(*data) * cnt); |
| return qla2x00_post_work(vha, e); |
| } |
| |
| void qla24xx_sched_upd_fcport(fc_port_t *fcport) |
| { |
| unsigned long flags; |
| |
| if (IS_SW_RESV_ADDR(fcport->d_id)) |
| return; |
| |
| spin_lock_irqsave(&fcport->vha->work_lock, flags); |
| if (fcport->disc_state == DSC_UPD_FCPORT) { |
| spin_unlock_irqrestore(&fcport->vha->work_lock, flags); |
| return; |
| } |
| fcport->jiffies_at_registration = jiffies; |
| fcport->sec_since_registration = 0; |
| fcport->next_disc_state = DSC_DELETED; |
| fcport->disc_state = DSC_UPD_FCPORT; |
| spin_unlock_irqrestore(&fcport->vha->work_lock, flags); |
| |
| queue_work(system_unbound_wq, &fcport->reg_work); |
| } |
| |
| static |
| void qla24xx_create_new_sess(struct scsi_qla_host *vha, struct qla_work_evt *e) |
| { |
| unsigned long flags; |
| fc_port_t *fcport = NULL, *tfcp; |
| struct qlt_plogi_ack_t *pla = |
| (struct qlt_plogi_ack_t *)e->u.new_sess.pla; |
| uint8_t free_fcport = 0; |
| |
| ql_dbg(ql_dbg_disc, vha, 0xffff, |
| "%s %d %8phC enter\n", |
| __func__, __LINE__, e->u.new_sess.port_name); |
| |
| spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags); |
| fcport = qla2x00_find_fcport_by_wwpn(vha, e->u.new_sess.port_name, 1); |
| if (fcport) { |
| fcport->d_id = e->u.new_sess.id; |
| if (pla) { |
| fcport->fw_login_state = DSC_LS_PLOGI_PEND; |
| memcpy(fcport->node_name, |
| pla->iocb.u.isp24.u.plogi.node_name, |
| WWN_SIZE); |
| qlt_plogi_ack_link(vha, pla, fcport, QLT_PLOGI_LINK_SAME_WWN); |
| /* we took an extra ref_count to prevent PLOGI ACK when |
| * fcport/sess has not been created. |
| */ |
| pla->ref_count--; |
| } |
| } else { |
| spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); |
| fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL); |
| if (fcport) { |
| fcport->d_id = e->u.new_sess.id; |
| fcport->flags |= FCF_FABRIC_DEVICE; |
| fcport->fw_login_state = DSC_LS_PLOGI_PEND; |
| |
| memcpy(fcport->port_name, e->u.new_sess.port_name, |
| WWN_SIZE); |
| |
| fcport->fc4_type = e->u.new_sess.fc4_type; |
| if (e->u.new_sess.fc4_type & FS_FCP_IS_N2N) { |
| fcport->fc4_type = FS_FC4TYPE_FCP; |
| fcport->n2n_flag = 1; |
| if (vha->flags.nvme_enabled) |
| fcport->fc4_type |= FS_FC4TYPE_NVME; |
| } |
| |
| } else { |
| ql_dbg(ql_dbg_disc, vha, 0xffff, |
| "%s %8phC mem alloc fail.\n", |
| __func__, e->u.new_sess.port_name); |
| |
| if (pla) { |
| list_del(&pla->list); |
| kmem_cache_free(qla_tgt_plogi_cachep, pla); |
| } |
| return; |
| } |
| |
| spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags); |
| /* search again to make sure no one else got ahead */ |
| tfcp = qla2x00_find_fcport_by_wwpn(vha, |
| e->u.new_sess.port_name, 1); |
| if (tfcp) { |
| /* should rarily happen */ |
| ql_dbg(ql_dbg_disc, vha, 0xffff, |
| "%s %8phC found existing fcport b4 add. DS %d LS %d\n", |
| __func__, tfcp->port_name, tfcp->disc_state, |
| tfcp->fw_login_state); |
| |
| free_fcport = 1; |
| } else { |
| list_add_tail(&fcport->list, &vha->vp_fcports); |
| |
| } |
| if (pla) { |
| qlt_plogi_ack_link(vha, pla, fcport, |
| QLT_PLOGI_LINK_SAME_WWN); |
| pla->ref_count--; |
| } |
| } |
| spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); |
| |
| if (fcport) { |
| fcport->id_changed = 1; |
| fcport->scan_state = QLA_FCPORT_FOUND; |
| fcport->chip_reset = vha->hw->base_qpair->chip_reset; |
| memcpy(fcport->node_name, e->u.new_sess.node_name, WWN_SIZE); |
| |
| if (pla) { |
| if (pla->iocb.u.isp24.status_subcode == ELS_PRLI) { |
| u16 wd3_lo; |
| |
| fcport->fw_login_state = DSC_LS_PRLI_PEND; |
| fcport->local = 0; |
| fcport->loop_id = |
| le16_to_cpu( |
| pla->iocb.u.isp24.nport_handle); |
| fcport->fw_login_state = DSC_LS_PRLI_PEND; |
| wd3_lo = |
| le16_to_cpu( |
| pla->iocb.u.isp24.u.prli.wd3_lo); |
| |
| if (wd3_lo & BIT_7) |
| fcport->conf_compl_supported = 1; |
| |
| if ((wd3_lo & BIT_4) == 0) |
| fcport->port_type = FCT_INITIATOR; |
| else |
| fcport->port_type = FCT_TARGET; |
| } |
| qlt_plogi_ack_unref(vha, pla); |
| } else { |
| fc_port_t *dfcp = NULL; |
| |
| spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags); |
| tfcp = qla2x00_find_fcport_by_nportid(vha, |
| &e->u.new_sess.id, 1); |
| if (tfcp && (tfcp != fcport)) { |
| /* |
| * We have a conflict fcport with same NportID. |
| */ |
| ql_dbg(ql_dbg_disc, vha, 0xffff, |
| "%s %8phC found conflict b4 add. DS %d LS %d\n", |
| __func__, tfcp->port_name, tfcp->disc_state, |
| tfcp->fw_login_state); |
| |
| switch (tfcp->disc_state) { |
| case DSC_DELETED: |
| break; |
| case DSC_DELETE_PEND: |
| fcport->login_pause = 1; |
| tfcp->conflict = fcport; |
| break; |
| default: |
| fcport->login_pause = 1; |
| tfcp->conflict = fcport; |
| dfcp = tfcp; |
| break; |
| } |
| } |
| spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); |
| if (dfcp) |
| qlt_schedule_sess_for_deletion(tfcp); |
| |
| if (N2N_TOPO(vha->hw)) { |
| fcport->flags &= ~FCF_FABRIC_DEVICE; |
| fcport->keep_nport_handle = 1; |
| if (vha->flags.nvme_enabled) { |
| fcport->fc4_type = |
| (FS_FC4TYPE_NVME | FS_FC4TYPE_FCP); |
| fcport->n2n_flag = 1; |
| } |
| fcport->fw_login_state = 0; |
| /* |
| * wait link init done before sending login |
| */ |
| } else { |
| qla24xx_fcport_handle_login(vha, fcport); |
| } |
| } |
| } |
| |
| if (free_fcport) { |
| qla2x00_free_fcport(fcport); |
| if (pla) { |
| list_del(&pla->list); |
| kmem_cache_free(qla_tgt_plogi_cachep, pla); |
| } |
| } |
| } |
| |
| static void qla_sp_retry(struct scsi_qla_host *vha, struct qla_work_evt *e) |
| { |
| struct srb *sp = e->u.iosb.sp; |
| int rval; |
| |
| rval = qla2x00_start_sp(sp); |
| if (rval != QLA_SUCCESS) { |
| ql_dbg(ql_dbg_disc, vha, 0x2043, |
| "%s: %s: Re-issue IOCB failed (%d).\n", |
| __func__, sp->name, rval); |
| qla24xx_sp_unmap(vha, sp); |
| } |
| } |
| |
| void |
| qla2x00_do_work(struct scsi_qla_host *vha) |
| { |
| struct qla_work_evt *e, *tmp; |
| unsigned long flags; |
| LIST_HEAD(work); |
| int rc; |
| |
| spin_lock_irqsave(&vha->work_lock, flags); |
| list_splice_init(&vha->work_list, &work); |
| spin_unlock_irqrestore(&vha->work_lock, flags); |
| |
| list_for_each_entry_safe(e, tmp, &work, list) { |
| rc = QLA_SUCCESS; |
| switch (e->type) { |
| case QLA_EVT_AEN: |
| fc_host_post_event(vha->host, fc_get_event_number(), |
| e->u.aen.code, e->u.aen.data); |
| break; |
| case QLA_EVT_IDC_ACK: |
| qla81xx_idc_ack(vha, e->u.idc_ack.mb); |
| break; |
| case QLA_EVT_ASYNC_LOGIN: |
| qla2x00_async_login(vha, e->u.logio.fcport, |
| e->u.logio.data); |
| break; |
| case QLA_EVT_ASYNC_LOGOUT: |
| rc = qla2x00_async_logout(vha, e->u.logio.fcport); |
| break; |
| case QLA_EVT_ASYNC_LOGOUT_DONE: |
| qla2x00_async_logout_done(vha, e->u.logio.fcport, |
| e->u.logio.data); |
| break; |
| case QLA_EVT_ASYNC_ADISC: |
| qla2x00_async_adisc(vha, e->u.logio.fcport, |
| e->u.logio.data); |
| break; |
| case QLA_EVT_UEVENT: |
| qla2x00_uevent_emit(vha, e->u.uevent.code); |
| break; |
| case QLA_EVT_AENFX: |
| qlafx00_process_aen(vha, e); |
| break; |
| case QLA_EVT_GPNID: |
| qla24xx_async_gpnid(vha, &e->u.gpnid.id); |
| break; |
| case QLA_EVT_UNMAP: |
| qla24xx_sp_unmap(vha, e->u.iosb.sp); |
| break; |
| case QLA_EVT_RELOGIN: |
| qla2x00_relogin(vha); |
| break; |
| case QLA_EVT_NEW_SESS: |
| qla24xx_create_new_sess(vha, e); |
| break; |
| case QLA_EVT_GPDB: |
| qla24xx_async_gpdb(vha, e->u.fcport.fcport, |
| e->u.fcport.opt); |
| break; |
| case QLA_EVT_PRLI: |
| qla24xx_async_prli(vha, e->u.fcport.fcport); |
| break; |
| case QLA_EVT_GPSC: |
| qla24xx_async_gpsc(vha, e->u.fcport.fcport); |
| break; |
| case QLA_EVT_GNL: |
| qla24xx_async_gnl(vha, e->u.fcport.fcport); |
| break; |
| case QLA_EVT_NACK: |
| qla24xx_do_nack_work(vha, e); |
| break; |
| case QLA_EVT_ASYNC_PRLO: |
| rc = qla2x00_async_prlo(vha, e->u.logio.fcport); |
| break; |
| case QLA_EVT_ASYNC_PRLO_DONE: |
| qla2x00_async_prlo_done(vha, e->u.logio.fcport, |
| e->u.logio.data); |
| break; |
| case QLA_EVT_GPNFT: |
| qla24xx_async_gpnft(vha, e->u.gpnft.fc4_type, |
| e->u.gpnft.sp); |
| break; |
| case QLA_EVT_GPNFT_DONE: |
| qla24xx_async_gpnft_done(vha, e->u.iosb.sp); |
| break; |
| case QLA_EVT_GNNFT_DONE: |
| qla24xx_async_gnnft_done(vha, e->u.iosb.sp); |
| break; |
| case QLA_EVT_GNNID: |
| qla24xx_async_gnnid(vha, e->u.fcport.fcport); |
| break; |
| case QLA_EVT_GFPNID: |
| qla24xx_async_gfpnid(vha, e->u.fcport.fcport); |
| break; |
| case QLA_EVT_SP_RETRY: |
| qla_sp_retry(vha, e); |
| break; |
| case QLA_EVT_IIDMA: |
| qla_do_iidma_work(vha, e->u.fcport.fcport); |
| break; |
| case QLA_EVT_ELS_PLOGI: |
| qla24xx_els_dcmd2_iocb(vha, ELS_DCMD_PLOGI, |
| e->u.fcport.fcport, false); |
| break; |
| } |
| |
| if (rc == EAGAIN) { |
| /* put 'work' at head of 'vha->work_list' */ |
| spin_lock_irqsave(&vha->work_lock, flags); |
| list_splice(&work, &vha->work_list); |
| spin_unlock_irqrestore(&vha->work_lock, flags); |
| break; |
| } |
| list_del_init(&e->list); |
| if (e->flags & QLA_EVT_FLAG_FREE) |
| kfree(e); |
| |
| /* For each work completed decrement vha ref count */ |
| QLA_VHA_MARK_NOT_BUSY(vha); |
| } |
| } |
| |
| int qla24xx_post_relogin_work(struct scsi_qla_host *vha) |
| { |
| struct qla_work_evt *e; |
| |
| e = qla2x00_alloc_work(vha, QLA_EVT_RELOGIN); |
| |
| if (!e) { |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| return qla2x00_post_work(vha, e); |
| } |
| |
| /* Relogins all the fcports of a vport |
| * Context: dpc thread |
| */ |
| void qla2x00_relogin(struct scsi_qla_host *vha) |
| { |
| fc_port_t *fcport; |
| int status, relogin_needed = 0; |
| struct event_arg ea; |
| |
| list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| /* |
| * If the port is not ONLINE then try to login |
| * to it if we haven't run out of retries. |
| */ |
| if (atomic_read(&fcport->state) != FCS_ONLINE && |
| fcport->login_retry) { |
| if (fcport->scan_state != QLA_FCPORT_FOUND || |
| fcport->disc_state == DSC_LOGIN_COMPLETE) |
| continue; |
| |
| if (fcport->flags & (FCF_ASYNC_SENT|FCF_ASYNC_ACTIVE) || |
| fcport->disc_state == DSC_DELETE_PEND) { |
| relogin_needed = 1; |
| } else { |
| if (vha->hw->current_topology != ISP_CFG_NL) { |
| memset(&ea, 0, sizeof(ea)); |
| ea.fcport = fcport; |
| qla24xx_handle_relogin_event(vha, &ea); |
| } else if (vha->hw->current_topology == |
| ISP_CFG_NL) { |
| fcport->login_retry--; |
| status = |
| qla2x00_local_device_login(vha, |
| fcport); |
| if (status == QLA_SUCCESS) { |
| fcport->old_loop_id = |
| fcport->loop_id; |
| ql_dbg(ql_dbg_disc, vha, 0x2003, |
| "Port login OK: logged in ID 0x%x.\n", |
| fcport->loop_id); |
| qla2x00_update_fcport |
| (vha, fcport); |
| } else if (status == 1) { |
| set_bit(RELOGIN_NEEDED, |
| &vha->dpc_flags); |
| /* retry the login again */ |
| ql_dbg(ql_dbg_disc, vha, 0x2007, |
| "Retrying %d login again loop_id 0x%x.\n", |
| fcport->login_retry, |
| fcport->loop_id); |
| } else { |
| fcport->login_retry = 0; |
| } |
| |
| if (fcport->login_retry == 0 && |
| status != QLA_SUCCESS) |
| qla2x00_clear_loop_id(fcport); |
| } |
| } |
| } |
| if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) |
| break; |
| } |
| |
| if (relogin_needed) |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| |
| ql_dbg(ql_dbg_disc, vha, 0x400e, |
| "Relogin end.\n"); |
| } |
| |
| /* Schedule work on any of the dpc-workqueues */ |
| void |
| qla83xx_schedule_work(scsi_qla_host_t *base_vha, int work_code) |
| { |
| struct qla_hw_data *ha = base_vha->hw; |
| |
| switch (work_code) { |
| case MBA_IDC_AEN: /* 0x8200 */ |
| if (ha->dpc_lp_wq) |
| queue_work(ha->dpc_lp_wq, &ha->idc_aen); |
| break; |
| |
| case QLA83XX_NIC_CORE_RESET: /* 0x1 */ |
| if (!ha->flags.nic_core_reset_hdlr_active) { |
| if (ha->dpc_hp_wq) |
| queue_work(ha->dpc_hp_wq, &ha->nic_core_reset); |
| } else |
| ql_dbg(ql_dbg_p3p, base_vha, 0xb05e, |
| "NIC Core reset is already active. Skip " |
| "scheduling it again.\n"); |
| break; |
| case QLA83XX_IDC_STATE_HANDLER: /* 0x2 */ |
| if (ha->dpc_hp_wq) |
| queue_work(ha->dpc_hp_wq, &ha->idc_state_handler); |
| break; |
| case QLA83XX_NIC_CORE_UNRECOVERABLE: /* 0x3 */ |
| if (ha->dpc_hp_wq) |
| queue_work(ha->dpc_hp_wq, &ha->nic_core_unrecoverable); |
| break; |
| default: |
| ql_log(ql_log_warn, base_vha, 0xb05f, |
| "Unknown work-code=0x%x.\n", work_code); |
| } |
| |
| return; |
| } |
| |
| /* Work: Perform NIC Core Unrecoverable state handling */ |
| void |
| qla83xx_nic_core_unrecoverable_work(struct work_struct *work) |
| { |
| struct qla_hw_data *ha = |
| container_of(work, struct qla_hw_data, nic_core_unrecoverable); |
| scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); |
| uint32_t dev_state = 0; |
| |
| qla83xx_idc_lock(base_vha, 0); |
| qla83xx_rd_reg(base_vha, QLA83XX_IDC_DEV_STATE, &dev_state); |
| qla83xx_reset_ownership(base_vha); |
| if (ha->flags.nic_core_reset_owner) { |
| ha->flags.nic_core_reset_owner = 0; |
| qla83xx_wr_reg(base_vha, QLA83XX_IDC_DEV_STATE, |
| QLA8XXX_DEV_FAILED); |
| ql_log(ql_log_info, base_vha, 0xb060, "HW State: FAILED.\n"); |
| qla83xx_schedule_work(base_vha, QLA83XX_IDC_STATE_HANDLER); |
| } |
| qla83xx_idc_unlock(base_vha, 0); |
| } |
| |
| /* Work: Execute IDC state handler */ |
| void |
| qla83xx_idc_state_handler_work(struct work_struct *work) |
| { |
| struct qla_hw_data *ha = |
| container_of(work, struct qla_hw_data, idc_state_handler); |
| scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); |
| uint32_t dev_state = 0; |
| |
| qla83xx_idc_lock(base_vha, 0); |
| qla83xx_rd_reg(base_vha, QLA83XX_IDC_DEV_STATE, &dev_state); |
| if (dev_state == QLA8XXX_DEV_FAILED || |
| dev_state == QLA8XXX_DEV_NEED_QUIESCENT) |
| qla83xx_idc_state_handler(base_vha); |
| qla83xx_idc_unlock(base_vha, 0); |
| } |
| |
| static int |
| qla83xx_check_nic_core_fw_alive(scsi_qla_host_t *base_vha) |
| { |
| int rval = QLA_SUCCESS; |
| unsigned long heart_beat_wait = jiffies + (1 * HZ); |
| uint32_t heart_beat_counter1, heart_beat_counter2; |
| |
| do { |
| if (time_after(jiffies, heart_beat_wait)) { |
| ql_dbg(ql_dbg_p3p, base_vha, 0xb07c, |
| "Nic Core f/w is not alive.\n"); |
| rval = QLA_FUNCTION_FAILED; |
| break; |
| } |
| |
| qla83xx_idc_lock(base_vha, 0); |
| qla83xx_rd_reg(base_vha, QLA83XX_FW_HEARTBEAT, |
| &heart_beat_counter1); |
| qla83xx_idc_unlock(base_vha, 0); |
| msleep(100); |
| qla83xx_idc_lock(base_vha, 0); |
| qla83xx_rd_reg(base_vha, QLA83XX_FW_HEARTBEAT, |
| &heart_beat_counter2); |
| qla83xx_idc_unlock(base_vha, 0); |
| } while (heart_beat_counter1 == heart_beat_counter2); |
| |
| return rval; |
| } |
| |
| /* Work: Perform NIC Core Reset handling */ |
| void |
| qla83xx_nic_core_reset_work(struct work_struct *work) |
| { |
| struct qla_hw_data *ha = |
| container_of(work, struct qla_hw_data, nic_core_reset); |
| scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); |
| uint32_t dev_state = 0; |
| |
| if (IS_QLA2031(ha)) { |
| if (qla2xxx_mctp_dump(base_vha) != QLA_SUCCESS) |
| ql_log(ql_log_warn, base_vha, 0xb081, |
| "Failed to dump mctp\n"); |
| return; |
| } |
| |
| if (!ha->flags.nic_core_reset_hdlr_active) { |
| if (qla83xx_check_nic_core_fw_alive(base_vha) == QLA_SUCCESS) { |
| qla83xx_idc_lock(base_vha, 0); |
| qla83xx_rd_reg(base_vha, QLA83XX_IDC_DEV_STATE, |
| &dev_state); |
| qla83xx_idc_unlock(base_vha, 0); |
| if (dev_state != QLA8XXX_DEV_NEED_RESET) { |
| ql_dbg(ql_dbg_p3p, base_vha, 0xb07a, |
| "Nic Core f/w is alive.\n"); |
| return; |
| } |
| } |
| |
| ha->flags.nic_core_reset_hdlr_active = 1; |
| if (qla83xx_nic_core_reset(base_vha)) { |
| /* NIC Core reset failed. */ |
| ql_dbg(ql_dbg_p3p, base_vha, 0xb061, |
| "NIC Core reset failed.\n"); |
| } |
| ha->flags.nic_core_reset_hdlr_active = 0; |
| } |
| } |
| |
| /* Work: Handle 8200 IDC aens */ |
| void |
| qla83xx_service_idc_aen(struct work_struct *work) |
| { |
| struct qla_hw_data *ha = |
| container_of(work, struct qla_hw_data, idc_aen); |
| scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); |
| uint32_t dev_state, idc_control; |
| |
| qla83xx_idc_lock(base_vha, 0); |
| qla83xx_rd_reg(base_vha, QLA83XX_IDC_DEV_STATE, &dev_state); |
| qla83xx_rd_reg(base_vha, QLA83XX_IDC_CONTROL, &idc_control); |
| qla83xx_idc_unlock(base_vha, 0); |
| if (dev_state == QLA8XXX_DEV_NEED_RESET) { |
| if (idc_control & QLA83XX_IDC_GRACEFUL_RESET) { |
| ql_dbg(ql_dbg_p3p, base_vha, 0xb062, |
| "Application requested NIC Core Reset.\n"); |
| qla83xx_schedule_work(base_vha, QLA83XX_NIC_CORE_RESET); |
| } else if (qla83xx_check_nic_core_fw_alive(base_vha) == |
| QLA_SUCCESS) { |
| ql_dbg(ql_dbg_p3p, base_vha, 0xb07b, |
| "Other protocol driver requested NIC Core Reset.\n"); |
| qla83xx_schedule_work(base_vha, QLA83XX_NIC_CORE_RESET); |
| } |
| } else if (dev_state == QLA8XXX_DEV_FAILED || |
| dev_state == QLA8XXX_DEV_NEED_QUIESCENT) { |
| qla83xx_schedule_work(base_vha, QLA83XX_IDC_STATE_HANDLER); |
| } |
| } |
| |
| static void |
| qla83xx_wait_logic(void) |
| { |
| int i; |
| |
| /* Yield CPU */ |
| if (!in_interrupt()) { |
| /* |
| * Wait about 200ms before retrying again. |
| * This controls the number of retries for single |
| * lock operation. |
| */ |
| msleep(100); |
| schedule(); |
| } else { |
| for (i = 0; i < 20; i++) |
| cpu_relax(); /* This a nop instr on i386 */ |
| } |
| } |
| |
| static int |
| qla83xx_force_lock_recovery(scsi_qla_host_t *base_vha) |
| { |
| int rval; |
| uint32_t data; |
| uint32_t idc_lck_rcvry_stage_mask = 0x3; |
| uint32_t idc_lck_rcvry_owner_mask = 0x3c; |
| struct qla_hw_data *ha = base_vha->hw; |
| |
| ql_dbg(ql_dbg_p3p, base_vha, 0xb086, |
| "Trying force recovery of the IDC lock.\n"); |
| |
| rval = qla83xx_rd_reg(base_vha, QLA83XX_IDC_LOCK_RECOVERY, &data); |
| if (rval) |
| return rval; |
| |
| if ((data & idc_lck_rcvry_stage_mask) > 0) { |
| return QLA_SUCCESS; |
| } else { |
| data = (IDC_LOCK_RECOVERY_STAGE1) | (ha->portnum << 2); |
| rval = qla83xx_wr_reg(base_vha, QLA83XX_IDC_LOCK_RECOVERY, |
| data); |
| if (rval) |
| return rval; |
| |
| msleep(200); |
| |
| rval = qla83xx_rd_reg(base_vha, QLA83XX_IDC_LOCK_RECOVERY, |
| &data); |
| if (rval) |
| return rval; |
| |
| if (((data & idc_lck_rcvry_owner_mask) >> 2) == ha->portnum) { |
| data &= (IDC_LOCK_RECOVERY_STAGE2 | |
| ~(idc_lck_rcvry_stage_mask)); |
| rval = qla83xx_wr_reg(base_vha, |
| QLA83XX_IDC_LOCK_RECOVERY, data); |
| if (rval) |
| return rval; |
| |
| /* Forcefully perform IDC UnLock */ |
| rval = qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_UNLOCK, |
| &data); |
| if (rval) |
| return rval; |
| /* Clear lock-id by setting 0xff */ |
| rval = qla83xx_wr_reg(base_vha, QLA83XX_DRIVER_LOCKID, |
| 0xff); |
| if (rval) |
| return rval; |
| /* Clear lock-recovery by setting 0x0 */ |
| rval = qla83xx_wr_reg(base_vha, |
| QLA83XX_IDC_LOCK_RECOVERY, 0x0); |
| if (rval) |
| return rval; |
| } else |
| return QLA_SUCCESS; |
| } |
| |
| return rval; |
| } |
| |
| static int |
| qla83xx_idc_lock_recovery(scsi_qla_host_t *base_vha) |
| { |
| int rval = QLA_SUCCESS; |
| uint32_t o_drv_lockid, n_drv_lockid; |
| unsigned long lock_recovery_timeout; |
| |
| lock_recovery_timeout = jiffies + QLA83XX_MAX_LOCK_RECOVERY_WAIT; |
| retry_lockid: |
| rval = qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_LOCKID, &o_drv_lockid); |
| if (rval) |
| goto exit; |
| |
| /* MAX wait time before forcing IDC Lock recovery = 2 secs */ |
| if (time_after_eq(jiffies, lock_recovery_timeout)) { |
| if (qla83xx_force_lock_recovery(base_vha) == QLA_SUCCESS) |
| return QLA_SUCCESS; |
| else |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| rval = qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_LOCKID, &n_drv_lockid); |
| if (rval) |
| goto exit; |
| |
| if (o_drv_lockid == n_drv_lockid) { |
| qla83xx_wait_logic(); |
| goto retry_lockid; |
| } else |
| return QLA_SUCCESS; |
| |
| exit: |
| return rval; |
| } |
| |
| void |
| qla83xx_idc_lock(scsi_qla_host_t *base_vha, uint16_t requester_id) |
| { |
| uint32_t data; |
| uint32_t lock_owner; |
| struct qla_hw_data *ha = base_vha->hw; |
| |
| /* IDC-lock implementation using driver-lock/lock-id remote registers */ |
| retry_lock: |
| if (qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_LOCK, &data) |
| == QLA_SUCCESS) { |
| if (data) { |
| /* Setting lock-id to our function-number */ |
| qla83xx_wr_reg(base_vha, QLA83XX_DRIVER_LOCKID, |
| ha->portnum); |
| } else { |
| qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_LOCKID, |
| &lock_owner); |
| ql_dbg(ql_dbg_p3p, base_vha, 0xb063, |
| "Failed to acquire IDC lock, acquired by %d, " |
| "retrying...\n", lock_owner); |
| |
| /* Retry/Perform IDC-Lock recovery */ |
| if (qla83xx_idc_lock_recovery(base_vha) |
| == QLA_SUCCESS) { |
| qla83xx_wait_logic(); |
| goto retry_lock; |
| } else |
| ql_log(ql_log_warn, base_vha, 0xb075, |
| "IDC Lock recovery FAILED.\n"); |
| } |
| |
| } |
| |
| return; |
| } |
| |
| void |
| qla83xx_idc_unlock(scsi_qla_host_t *base_vha, uint16_t requester_id) |
| { |
| #if 0 |
| uint16_t options = (requester_id << 15) | BIT_7; |
| #endif |
| uint16_t retry; |
| uint32_t data; |
| struct qla_hw_data *ha = base_vha->hw; |
| |
| /* IDC-unlock implementation using driver-unlock/lock-id |
| * remote registers |
| */ |
| retry = 0; |
| retry_unlock: |
| if (qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_LOCKID, &data) |
| == QLA_SUCCESS) { |
| if (data == ha->portnum) { |
| qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_UNLOCK, &data); |
| /* Clearing lock-id by setting 0xff */ |
| qla83xx_wr_reg(base_vha, QLA83XX_DRIVER_LOCKID, 0xff); |
| } else if (retry < 10) { |
| /* SV: XXX: IDC unlock retrying needed here? */ |
| |
| /* Retry for IDC-unlock */ |
| qla83xx_wait_logic(); |
| retry++; |
| ql_dbg(ql_dbg_p3p, base_vha, 0xb064, |
| "Failed to release IDC lock, retrying=%d\n", retry); |
| goto retry_unlock; |
| } |
| } else if (retry < 10) { |
| /* Retry for IDC-unlock */ |
| qla83xx_wait_logic(); |
| retry++; |
| ql_dbg(ql_dbg_p3p, base_vha, 0xb065, |
| "Failed to read drv-lockid, retrying=%d\n", retry); |
| goto retry_unlock; |
| } |
| |
| return; |
| |
| #if 0 |
| /* XXX: IDC-unlock implementation using access-control mbx */ |
| retry = 0; |
| retry_unlock2: |
| if (qla83xx_access_control(base_vha, options, 0, 0, NULL)) { |
| if (retry < 10) { |
| /* Retry for IDC-unlock */ |
| qla83xx_wait_logic(); |
| retry++; |
| ql_dbg(ql_dbg_p3p, base_vha, 0xb066, |
| "Failed to release IDC lock, retrying=%d\n", retry); |
| goto retry_unlock2; |
| } |
| } |
| |
| return; |
| #endif |
| } |
| |
| int |
| __qla83xx_set_drv_presence(scsi_qla_host_t *vha) |
| { |
| int rval = QLA_SUCCESS; |
| struct qla_hw_data *ha = vha->hw; |
| uint32_t drv_presence; |
| |
| rval = qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence); |
| if (rval == QLA_SUCCESS) { |
| drv_presence |= (1 << ha->portnum); |
| rval = qla83xx_wr_reg(vha, QLA83XX_IDC_DRV_PRESENCE, |
| drv_presence); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla83xx_set_drv_presence(scsi_qla_host_t *vha) |
| { |
| int rval = QLA_SUCCESS; |
| |
| qla83xx_idc_lock(vha, 0); |
| rval = __qla83xx_set_drv_presence(vha); |
| qla83xx_idc_unlock(vha, 0); |
| |
| return rval; |
| } |
| |
| int |
| __qla83xx_clear_drv_presence(scsi_qla_host_t *vha) |
| { |
| int rval = QLA_SUCCESS; |
| struct qla_hw_data *ha = vha->hw; |
| uint32_t drv_presence; |
| |
| rval = qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence); |
| if (rval == QLA_SUCCESS) { |
| drv_presence &= ~(1 << ha->portnum); |
| rval = qla83xx_wr_reg(vha, QLA83XX_IDC_DRV_PRESENCE, |
| drv_presence); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla83xx_clear_drv_presence(scsi_qla_host_t *vha) |
| { |
| int rval = QLA_SUCCESS; |
| |
| qla83xx_idc_lock(vha, 0); |
| rval = __qla83xx_clear_drv_presence(vha); |
| qla83xx_idc_unlock(vha, 0); |
| |
| return rval; |
| } |
| |
| static void |
| qla83xx_need_reset_handler(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| uint32_t drv_ack, drv_presence; |
| unsigned long ack_timeout; |
| |
| /* Wait for IDC ACK from all functions (DRV-ACK == DRV-PRESENCE) */ |
| ack_timeout = jiffies + (ha->fcoe_reset_timeout * HZ); |
| while (1) { |
| qla83xx_rd_reg(vha, QLA83XX_IDC_DRIVER_ACK, &drv_ack); |
| qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence); |
| if ((drv_ack & drv_presence) == drv_presence) |
| break; |
| |
| if (time_after_eq(jiffies, ack_timeout)) { |
| ql_log(ql_log_warn, vha, 0xb067, |
| "RESET ACK TIMEOUT! drv_presence=0x%x " |
| "drv_ack=0x%x\n", drv_presence, drv_ack); |
| /* |
| * The function(s) which did not ack in time are forced |
| * to withdraw any further participation in the IDC |
| * reset. |
| */ |
| if (drv_ack != drv_presence) |
| qla83xx_wr_reg(vha, QLA83XX_IDC_DRV_PRESENCE, |
| drv_ack); |
| break; |
| } |
| |
| qla83xx_idc_unlock(vha, 0); |
| msleep(1000); |
| qla83xx_idc_lock(vha, 0); |
| } |
| |
| qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE, QLA8XXX_DEV_COLD); |
| ql_log(ql_log_info, vha, 0xb068, "HW State: COLD/RE-INIT.\n"); |
| } |
| |
| static int |
| qla83xx_device_bootstrap(scsi_qla_host_t *vha) |
| { |
| int rval = QLA_SUCCESS; |
| uint32_t idc_control; |
| |
| qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE, QLA8XXX_DEV_INITIALIZING); |
| ql_log(ql_log_info, vha, 0xb069, "HW State: INITIALIZING.\n"); |
| |
| /* Clearing IDC-Control Graceful-Reset Bit before resetting f/w */ |
| __qla83xx_get_idc_control(vha, &idc_control); |
| idc_control &= ~QLA83XX_IDC_GRACEFUL_RESET; |
| __qla83xx_set_idc_control(vha, 0); |
| |
| qla83xx_idc_unlock(vha, 0); |
| rval = qla83xx_restart_nic_firmware(vha); |
| qla83xx_idc_lock(vha, 0); |
| |
| if (rval != QLA_SUCCESS) { |
| ql_log(ql_log_fatal, vha, 0xb06a, |
| "Failed to restart NIC f/w.\n"); |
| qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE, QLA8XXX_DEV_FAILED); |
| ql_log(ql_log_info, vha, 0xb06b, "HW State: FAILED.\n"); |
| } else { |
| ql_dbg(ql_dbg_p3p, vha, 0xb06c, |
| "Success in restarting nic f/w.\n"); |
| qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE, QLA8XXX_DEV_READY); |
| ql_log(ql_log_info, vha, 0xb06d, "HW State: READY.\n"); |
| } |
| |
| return rval; |
| } |
| |
| /* Assumes idc_lock always held on entry */ |
| int |
| qla83xx_idc_state_handler(scsi_qla_host_t *base_vha) |
| { |
| struct qla_hw_data *ha = base_vha->hw; |
| int rval = QLA_SUCCESS; |
| unsigned long dev_init_timeout; |
| uint32_t dev_state; |
| |
| /* Wait for MAX-INIT-TIMEOUT for the device to go ready */ |
| dev_init_timeout = jiffies + (ha->fcoe_dev_init_timeout * HZ); |
| |
| while (1) { |
| |
| if (time_after_eq(jiffies, dev_init_timeout)) { |
| ql_log(ql_log_warn, base_vha, 0xb06e, |
| "Initialization TIMEOUT!\n"); |
| /* Init timeout. Disable further NIC Core |
| * communication. |
| */ |
| qla83xx_wr_reg(base_vha, QLA83XX_IDC_DEV_STATE, |
| QLA8XXX_DEV_FAILED); |
| ql_log(ql_log_info, base_vha, 0xb06f, |
| "HW State: FAILED.\n"); |
| } |
| |
| qla83xx_rd_reg(base_vha, QLA83XX_IDC_DEV_STATE, &dev_state); |
| switch (dev_state) { |
| case QLA8XXX_DEV_READY: |
| if (ha->flags.nic_core_reset_owner) |
| qla83xx_idc_audit(base_vha, |
| IDC_AUDIT_COMPLETION); |
| ha->flags.nic_core_reset_owner = 0; |
| ql_dbg(ql_dbg_p3p, base_vha, 0xb070, |
| "Reset_owner reset by 0x%x.\n", |
| ha->portnum); |
| goto exit; |
| case QLA8XXX_DEV_COLD: |
| if (ha->flags.nic_core_reset_owner) |
| rval = qla83xx_device_bootstrap(base_vha); |
| else { |
| /* Wait for AEN to change device-state */ |
| qla83xx_idc_unlock(base_vha, 0); |
| msleep(1000); |
| qla83xx_idc_lock(base_vha, 0); |
| } |
| break; |
| case QLA8XXX_DEV_INITIALIZING: |
| /* Wait for AEN to change device-state */ |
| qla83xx_idc_unlock(base_vha, 0); |
| msleep(1000); |
| qla83xx_idc_lock(base_vha, 0); |
| break; |
| case QLA8XXX_DEV_NEED_RESET: |
| if (!ql2xdontresethba && ha->flags.nic_core_reset_owner) |
| qla83xx_need_reset_handler(base_vha); |
| else { |
| /* Wait for AEN to change device-state */ |
| qla83xx_idc_unlock(base_vha, 0); |
| msleep(1000); |
| qla83xx_idc_lock(base_vha, 0); |
| } |
| /* reset timeout value after need reset handler */ |
| dev_init_timeout = jiffies + |
| (ha->fcoe_dev_init_timeout * HZ); |
| break; |
| case QLA8XXX_DEV_NEED_QUIESCENT: |
| /* XXX: DEBUG for now */ |
| qla83xx_idc_unlock(base_vha, 0); |
| msleep(1000); |
| qla83xx_idc_lock(base_vha, 0); |
| break; |
| case QLA8XXX_DEV_QUIESCENT: |
| /* XXX: DEBUG for now */ |
| if (ha->flags.quiesce_owner) |
| goto exit; |
| |
| qla83xx_idc_unlock(base_vha, 0); |
| msleep(1000); |
| qla83xx_idc_lock(base_vha, 0); |
| dev_init_timeout = jiffies + |
| (ha->fcoe_dev_init_timeout * HZ); |
| break; |
| case QLA8XXX_DEV_FAILED: |
| if (ha->flags.nic_core_reset_owner) |
| qla83xx_idc_audit(base_vha, |
| IDC_AUDIT_COMPLETION); |
| ha->flags.nic_core_reset_owner = 0; |
| __qla83xx_clear_drv_presence(base_vha); |
| qla83xx_idc_unlock(base_vha, 0); |
| qla8xxx_dev_failed_handler(base_vha); |
| rval = QLA_FUNCTION_FAILED; |
| qla83xx_idc_lock(base_vha, 0); |
| goto exit; |
| case QLA8XXX_BAD_VALUE: |
| qla83xx_idc_unlock(base_vha, 0); |
| msleep(1000); |
| qla83xx_idc_lock(base_vha, 0); |
| break; |
| default: |
| ql_log(ql_log_warn, base_vha, 0xb071, |
| "Unknown Device State: %x.\n", dev_state); |
| qla83xx_idc_unlock(base_vha, 0); |
| qla8xxx_dev_failed_handler(base_vha); |
| rval = QLA_FUNCTION_FAILED; |
| qla83xx_idc_lock(base_vha, 0); |
| goto exit; |
| } |
| } |
| |
| exit: |
| return rval; |
| } |
| |
| void |
| qla2x00_disable_board_on_pci_error(struct work_struct *work) |
| { |
| struct qla_hw_data *ha = container_of(work, struct qla_hw_data, |
| board_disable); |
| struct pci_dev *pdev = ha->pdev; |
| scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); |
| |
| /* |
| * if UNLOAD flag is already set, then continue unload, |
| * where it was set first. |
| */ |
| if (test_bit(UNLOADING, &base_vha->dpc_flags)) |
| return; |
| |
| ql_log(ql_log_warn, base_vha, 0x015b, |
| "Disabling adapter.\n"); |
| |
| if (!atomic_read(&pdev->enable_cnt)) { |
| ql_log(ql_log_info, base_vha, 0xfffc, |
| "PCI device disabled, no action req for PCI error=%lx\n", |
| base_vha->pci_flags); |
| return; |
| } |
| |
| qla2x00_wait_for_sess_deletion(base_vha); |
| |
| set_bit(UNLOADING, &base_vha->dpc_flags); |
| |
| qla2x00_delete_all_vps(ha, base_vha); |
| |
| qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16); |
| |
| qla2x00_dfs_remove(base_vha); |
| |
| qla84xx_put_chip(base_vha); |
| |
| if (base_vha->timer_active) |
| qla2x00_stop_timer(base_vha); |
| |
| base_vha->flags.online = 0; |
| |
| qla2x00_destroy_deferred_work(ha); |
| |
| /* |
| * Do not try to stop beacon blink as it will issue a mailbox |
| * command. |
| */ |
| qla2x00_free_sysfs_attr(base_vha, false); |
| |
| fc_remove_host(base_vha->host); |
| |
| scsi_remove_host(base_vha->host); |
| |
| base_vha->flags.init_done = 0; |
| qla25xx_delete_queues(base_vha); |
| qla2x00_free_fcports(base_vha); |
| qla2x00_free_irqs(base_vha); |
| qla2x00_mem_free(ha); |
| qla82xx_md_free(base_vha); |
| qla2x00_free_queues(ha); |
| |
| qla2x00_unmap_iobases(ha); |
| |
| pci_release_selected_regions(ha->pdev, ha->bars); |
| pci_disable_pcie_error_reporting(pdev); |
| pci_disable_device(pdev); |
| |
| /* |
| * Let qla2x00_remove_one cleanup qla_hw_data on device removal. |
| */ |
| } |
| |
| /************************************************************************** |
| * qla2x00_do_dpc |
| * This kernel thread is a task that is schedule by the interrupt handler |
| * to perform the background processing for interrupts. |
| * |
| * Notes: |
| * This task always run in the context of a kernel thread. It |
| * is kick-off by the driver's detect code and starts up |
| * up one per adapter. It immediately goes to sleep and waits for |
| * some fibre event. When either the interrupt handler or |
| * the timer routine detects a event it will one of the task |
| * bits then wake us up. |
| **************************************************************************/ |
| static int |
| qla2x00_do_dpc(void *data) |
| { |
| scsi_qla_host_t *base_vha; |
| struct qla_hw_data *ha; |
| uint32_t online; |
| struct qla_qpair *qpair; |
| |
| ha = (struct qla_hw_data *)data; |
| base_vha = pci_get_drvdata(ha->pdev); |
| |
| set_user_nice(current, MIN_NICE); |
| |
| set_current_state(TASK_INTERRUPTIBLE); |
| while (!kthread_should_stop()) { |
| ql_dbg(ql_dbg_dpc, base_vha, 0x4000, |
| "DPC handler sleeping.\n"); |
| |
| schedule(); |
| |
| if (!base_vha->flags.init_done || ha->flags.mbox_busy) |
| goto end_loop; |
| |
| if (ha->flags.eeh_busy) { |
| ql_dbg(ql_dbg_dpc, base_vha, 0x4003, |
| "eeh_busy=%d.\n", ha->flags.eeh_busy); |
| goto end_loop; |
| } |
| |
| ha->dpc_active = 1; |
| |
| ql_dbg(ql_dbg_dpc + ql_dbg_verbose, base_vha, 0x4001, |
| "DPC handler waking up, dpc_flags=0x%lx.\n", |
| base_vha->dpc_flags); |
| |
| if (test_bit(UNLOADING, &base_vha->dpc_flags)) |
| break; |
| |
| if (IS_P3P_TYPE(ha)) { |
| if (IS_QLA8044(ha)) { |
| if (test_and_clear_bit(ISP_UNRECOVERABLE, |
| &base_vha->dpc_flags)) { |
| qla8044_idc_lock(ha); |
| qla8044_wr_direct(base_vha, |
| QLA8044_CRB_DEV_STATE_INDEX, |
| QLA8XXX_DEV_FAILED); |
| qla8044_idc_unlock(ha); |
| ql_log(ql_log_info, base_vha, 0x4004, |
| "HW State: FAILED.\n"); |
| qla8044_device_state_handler(base_vha); |
| continue; |
| } |
| |
| } else { |
| if (test_and_clear_bit(ISP_UNRECOVERABLE, |
| &base_vha->dpc_flags)) { |
| qla82xx_idc_lock(ha); |
| qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, |
| QLA8XXX_DEV_FAILED); |
| qla82xx_idc_unlock(ha); |
| ql_log(ql_log_info, base_vha, 0x0151, |
| "HW State: FAILED.\n"); |
| qla82xx_device_state_handler(base_vha); |
| continue; |
| } |
| } |
| |
| if (test_and_clear_bit(FCOE_CTX_RESET_NEEDED, |
| &base_vha->dpc_flags)) { |
| |
| ql_dbg(ql_dbg_dpc, base_vha, 0x4005, |
| "FCoE context reset scheduled.\n"); |
| if (!(test_and_set_bit(ABORT_ISP_ACTIVE, |
| &base_vha->dpc_flags))) { |
| if (qla82xx_fcoe_ctx_reset(base_vha)) { |
| /* FCoE-ctx reset failed. |
| * Escalate to chip-reset |
| */ |
| set_bit(ISP_ABORT_NEEDED, |
| &base_vha->dpc_flags); |
| } |
| clear_bit(ABORT_ISP_ACTIVE, |
| &base_vha->dpc_flags); |
| } |
| |
| ql_dbg(ql_dbg_dpc, base_vha, 0x4006, |
| "FCoE context reset end.\n"); |
| } |
| } else if (IS_QLAFX00(ha)) { |
| if (test_and_clear_bit(ISP_UNRECOVERABLE, |
| &base_vha->dpc_flags)) { |
| ql_dbg(ql_dbg_dpc, base_vha, 0x4020, |
| "Firmware Reset Recovery\n"); |
| if (qlafx00_reset_initialize(base_vha)) { |
| /* Failed. Abort isp later. */ |
| if (!test_bit(UNLOADING, |
| &base_vha->dpc_flags)) { |
| set_bit(ISP_UNRECOVERABLE, |
| &base_vha->dpc_flags); |
| ql_dbg(ql_dbg_dpc, base_vha, |
| 0x4021, |
| "Reset Recovery Failed\n"); |
| } |
| } |
| } |
| |
| if (test_and_clear_bit(FX00_TARGET_SCAN, |
| &base_vha->dpc_flags)) { |
| ql_dbg(ql_dbg_dpc, base_vha, 0x4022, |
| "ISPFx00 Target Scan scheduled\n"); |
| if (qlafx00_rescan_isp(base_vha)) { |
| if (!test_bit(UNLOADING, |
| &base_vha->dpc_flags)) |
| set_bit(ISP_UNRECOVERABLE, |
| &base_vha->dpc_flags); |
| ql_dbg(ql_dbg_dpc, base_vha, 0x401e, |
| "ISPFx00 Target Scan Failed\n"); |
| } |
| ql_dbg(ql_dbg_dpc, base_vha, 0x401f, |
| "ISPFx00 Target Scan End\n"); |
| } |
| if (test_and_clear_bit(FX00_HOST_INFO_RESEND, |
| &base_vha->dpc_flags)) { |
| ql_dbg(ql_dbg_dpc, base_vha, 0x4023, |
| "ISPFx00 Host Info resend scheduled\n"); |
| qlafx00_fx_disc(base_vha, |
| &base_vha->hw->mr.fcport, |
| FXDISC_REG_HOST_INFO); |
| } |
| } |
| |
| if (test_and_clear_bit(DETECT_SFP_CHANGE, |
| &base_vha->dpc_flags) && |
| !test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) { |
| qla24xx_detect_sfp(base_vha); |
| |
| if (ha->flags.detected_lr_sfp != |
| ha->flags.using_lr_setting) |
| set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags); |
| } |
| |
| if (test_and_clear_bit |
| (ISP_ABORT_NEEDED, &base_vha->dpc_flags) && |
| !test_bit(UNLOADING, &base_vha->dpc_flags)) { |
| bool do_reset = true; |
| |
| switch (base_vha->qlini_mode) { |
| case QLA2XXX_INI_MODE_ENABLED: |
| break; |
| case QLA2XXX_INI_MODE_DISABLED: |
| if (!qla_tgt_mode_enabled(base_vha) && |
| !ha->flags.fw_started) |
| do_reset = false; |
| break; |
| case QLA2XXX_INI_MODE_DUAL: |
| if (!qla_dual_mode_enabled(base_vha) && |
| !ha->flags.fw_started) |
| do_reset = false; |
| break; |
| default: |
| break; |
| } |
| |
| if (do_reset && !(test_and_set_bit(ABORT_ISP_ACTIVE, |
| &base_vha->dpc_flags))) { |
| ql_dbg(ql_dbg_dpc, base_vha, 0x4007, |
| "ISP abort scheduled.\n"); |
| if (ha->isp_ops->abort_isp(base_vha)) { |
| /* failed. retry later */ |
| set_bit(ISP_ABORT_NEEDED, |
| &base_vha->dpc_flags); |
| } |
| clear_bit(ABORT_ISP_ACTIVE, |
| &base_vha->dpc_flags); |
| ql_dbg(ql_dbg_dpc, base_vha, 0x4008, |
| "ISP abort end.\n"); |
| } |
| } |
| |
| if (test_and_clear_bit(FCPORT_UPDATE_NEEDED, |
| &base_vha->dpc_flags)) { |
| qla2x00_update_fcports(base_vha); |
| } |
| |
| if (IS_QLAFX00(ha)) |
| goto loop_resync_check; |
| |
| if (test_bit(ISP_QUIESCE_NEEDED, &base_vha->dpc_flags)) { |
| ql_dbg(ql_dbg_dpc, base_vha, 0x4009, |
| "Quiescence mode scheduled.\n"); |
| if (IS_P3P_TYPE(ha)) { |
| if (IS_QLA82XX(ha)) |
| qla82xx_device_state_handler(base_vha); |
| if (IS_QLA8044(ha)) |
| qla8044_device_state_handler(base_vha); |
| clear_bit(ISP_QUIESCE_NEEDED, |
| &base_vha->dpc_flags); |
| if (!ha->flags.quiesce_owner) { |
| qla2x00_perform_loop_resync(base_vha); |
| if (IS_QLA82XX(ha)) { |
| qla82xx_idc_lock(ha); |
| qla82xx_clear_qsnt_ready( |
| base_vha); |
| qla82xx_idc_unlock(ha); |
| } else if (IS_QLA8044(ha)) { |
| qla8044_idc_lock(ha); |
| qla8044_clear_qsnt_ready( |
| base_vha); |
| qla8044_idc_unlock(ha); |
| } |
| } |
| } else { |
| clear_bit(ISP_QUIESCE_NEEDED, |
| &base_vha->dpc_flags); |
| qla2x00_quiesce_io(base_vha); |
| } |
| ql_dbg(ql_dbg_dpc, base_vha, 0x400a, |
| "Quiescence mode end.\n"); |
| } |
| |
| if (test_and_clear_bit(RESET_MARKER_NEEDED, |
| &base_vha->dpc_flags) && |
| (!(test_and_set_bit(RESET_ACTIVE, &base_vha->dpc_flags)))) { |
| |
| ql_dbg(ql_dbg_dpc, base_vha, 0x400b, |
| "Reset marker scheduled.\n"); |
| qla2x00_rst_aen(base_vha); |
| clear_bit(RESET_ACTIVE, &base_vha->dpc_flags); |
| ql_dbg(ql_dbg_dpc, base_vha, 0x400c, |
| "Reset marker end.\n"); |
| } |
| |
| /* Retry each device up to login retry count */ |
| if (test_bit(RELOGIN_NEEDED, &base_vha->dpc_flags) && |
| !test_bit(LOOP_RESYNC_NEEDED, &base_vha->dpc_flags) && |
| atomic_read(&base_vha->loop_state) != LOOP_DOWN) { |
| |
| if (!base_vha->relogin_jif || |
| time_after_eq(jiffies, base_vha->relogin_jif)) { |
| base_vha->relogin_jif = jiffies + HZ; |
| clear_bit(RELOGIN_NEEDED, &base_vha->dpc_flags); |
| |
| ql_dbg(ql_dbg_disc, base_vha, 0x400d, |
| "Relogin scheduled.\n"); |
| qla24xx_post_relogin_work(base_vha); |
| } |
| } |
| loop_resync_check: |
| if (test_and_clear_bit(LOOP_RESYNC_NEEDED, |
| &base_vha->dpc_flags)) { |
| |
| ql_dbg(ql_dbg_dpc, base_vha, 0x400f, |
| "Loop resync scheduled.\n"); |
| |
| if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE, |
| &base_vha->dpc_flags))) { |
| |
| qla2x00_loop_resync(base_vha); |
| |
| clear_bit(LOOP_RESYNC_ACTIVE, |
| &base_vha->dpc_flags); |
| } |
| |
| ql_dbg(ql_dbg_dpc, base_vha, 0x4010, |
| "Loop resync end.\n"); |
| } |
| |
| if (IS_QLAFX00(ha)) |
| goto intr_on_check; |
| |
| if (test_bit(NPIV_CONFIG_NEEDED, &base_vha->dpc_flags) && |
| atomic_read(&base_vha->loop_state) == LOOP_READY) { |
| clear_bit(NPIV_CONFIG_NEEDED, &base_vha->dpc_flags); |
| qla2xxx_flash_npiv_conf(base_vha); |
| } |
| |
| intr_on_check: |
| if (!ha->interrupts_on) |
| ha->isp_ops->enable_intrs(ha); |
| |
| if (test_and_clear_bit(BEACON_BLINK_NEEDED, |
| &base_vha->dpc_flags)) { |
| if (ha->beacon_blink_led == 1) |
| ha->isp_ops->beacon_blink(base_vha); |
| } |
| |
| /* qpair online check */ |
| if (test_and_clear_bit(QPAIR_ONLINE_CHECK_NEEDED, |
| &base_vha->dpc_flags)) { |
| if (ha->flags.eeh_busy || |
| ha->flags.pci_channel_io_perm_failure) |
| online = 0; |
| else |
| online = 1; |
| |
| mutex_lock(&ha->mq_lock); |
| list_for_each_entry(qpair, &base_vha->qp_list, |
| qp_list_elem) |
| qpair->online = online; |
| mutex_unlock(&ha->mq_lock); |
| } |
| |
| if (test_and_clear_bit(SET_NVME_ZIO_THRESHOLD_NEEDED, |
| &base_vha->dpc_flags)) { |
| ql_log(ql_log_info, base_vha, 0xffffff, |
| "nvme: SET ZIO Activity exchange threshold to %d.\n", |
| ha->nvme_last_rptd_aen); |
| if (qla27xx_set_zio_threshold(base_vha, |
| ha->nvme_last_rptd_aen)) { |
| ql_log(ql_log_info, base_vha, 0xffffff, |
| "nvme: Unable to SET ZIO Activity exchange threshold to %d.\n", |
| ha->nvme_last_rptd_aen); |
| } |
| } |
| |
| if (test_and_clear_bit(SET_ZIO_THRESHOLD_NEEDED, |
| &base_vha->dpc_flags)) { |
| ql_log(ql_log_info, base_vha, 0xffffff, |
| "SET ZIO Activity exchange threshold to %d.\n", |
| ha->last_zio_threshold); |
| qla27xx_set_zio_threshold(base_vha, |
| ha->last_zio_threshold); |
| } |
| |
| if (!IS_QLAFX00(ha)) |
| qla2x00_do_dpc_all_vps(base_vha); |
| |
| if (test_and_clear_bit(N2N_LINK_RESET, |
| &base_vha->dpc_flags)) { |
| qla2x00_lip_reset(base_vha); |
| } |
| |
| ha->dpc_active = 0; |
| end_loop: |
| set_current_state(TASK_INTERRUPTIBLE); |
| } /* End of while(1) */ |
| __set_current_state(TASK_RUNNING); |
| |
| ql_dbg(ql_dbg_dpc, base_vha, 0x4011, |
| "DPC handler exiting.\n"); |
| |
| /* |
| * Make sure that nobody tries to wake us up again. |
| */ |
| ha->dpc_active = 0; |
| |
| /* Cleanup any residual CTX SRBs. */ |
| qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16); |
| |
| return 0; |
| } |
| |
| void |
| qla2xxx_wake_dpc(struct scsi_qla_host *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| struct task_struct *t = ha->dpc_thread; |
| |
| if (!test_bit(UNLOADING, &vha->dpc_flags) && t) |
| wake_up_process(t); |
| } |
| |
| /* |
| * qla2x00_rst_aen |
| * Processes asynchronous reset. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| */ |
| static void |
| qla2x00_rst_aen(scsi_qla_host_t *vha) |
| { |
| if (vha->flags.online && !vha->flags.reset_active && |
| !atomic_read(&vha->loop_down_timer) && |
| !(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))) { |
| do { |
| clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); |
| |
| /* |
| * Issue marker command only when we are going to start |
| * the I/O. |
| */ |
| vha->marker_needed = 1; |
| } while (!atomic_read(&vha->loop_down_timer) && |
| (test_bit(RESET_MARKER_NEEDED, &vha->dpc_flags))); |
| } |
| } |
| |
| /************************************************************************** |
| * qla2x00_timer |
| * |
| * Description: |
| * One second timer |
| * |
| * Context: Interrupt |
| ***************************************************************************/ |
| void |
| qla2x00_timer(struct timer_list *t) |
| { |
| scsi_qla_host_t *vha = from_timer(vha, t, timer); |
| unsigned long cpu_flags = 0; |
| int start_dpc = 0; |
| int index; |
| srb_t *sp; |
| uint16_t w; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req; |
| |
| if (ha->flags.eeh_busy) { |
| ql_dbg(ql_dbg_timer, vha, 0x6000, |
| "EEH = %d, restarting timer.\n", |
| ha->flags.eeh_busy); |
| qla2x00_restart_timer(vha, WATCH_INTERVAL); |
| return; |
| } |
| |
| /* |
| * Hardware read to raise pending EEH errors during mailbox waits. If |
| * the read returns -1 then disable the board. |
| */ |
| if (!pci_channel_offline(ha->pdev)) { |
| pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w); |
| qla2x00_check_reg16_for_disconnect(vha, w); |
| } |
| |
| /* Make sure qla82xx_watchdog is run only for physical port */ |
| if (!vha->vp_idx && IS_P3P_TYPE(ha)) { |
| if (test_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags)) |
| start_dpc++; |
| if (IS_QLA82XX(ha)) |
| qla82xx_watchdog(vha); |
| else if (IS_QLA8044(ha)) |
| qla8044_watchdog(vha); |
| } |
| |
| if (!vha->vp_idx && IS_QLAFX00(ha)) |
| qlafx00_timer_routine(vha); |
| |
| /* Loop down handler. */ |
| if (atomic_read(&vha->loop_down_timer) > 0 && |
| !(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) && |
| !(test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags)) |
| && vha->flags.online) { |
| |
| if (atomic_read(&vha->loop_down_timer) == |
| vha->loop_down_abort_time) { |
| |
| ql_log(ql_log_info, vha, 0x6008, |
| "Loop down - aborting the queues before time expires.\n"); |
| |
| if (!IS_QLA2100(ha) && vha->link_down_timeout) |
| atomic_set(&vha->loop_state, LOOP_DEAD); |
| |
| /* |
| * Schedule an ISP abort to return any FCP2-device |
| * commands. |
| */ |
| /* NPIV - scan physical port only */ |
| if (!vha->vp_idx) { |
| spin_lock_irqsave(&ha->hardware_lock, |
| cpu_flags); |
| req = ha->req_q_map[0]; |
| for (index = 1; |
| index < req->num_outstanding_cmds; |
| index++) { |
| fc_port_t *sfcp; |
| |
| sp = req->outstanding_cmds[index]; |
| if (!sp) |
| continue; |
| if (sp->cmd_type != TYPE_SRB) |
| continue; |
| if (sp->type != SRB_SCSI_CMD) |
| continue; |
| sfcp = sp->fcport; |
| if (!(sfcp->flags & FCF_FCP2_DEVICE)) |
| continue; |
| |
| if (IS_QLA82XX(ha)) |
| set_bit(FCOE_CTX_RESET_NEEDED, |
| &vha->dpc_flags); |
| else |
| set_bit(ISP_ABORT_NEEDED, |
| &vha->dpc_flags); |
| break; |
| } |
| spin_unlock_irqrestore(&ha->hardware_lock, |
| cpu_flags); |
| } |
| start_dpc++; |
| } |
| |
| /* if the loop has been down for 4 minutes, reinit adapter */ |
| if (atomic_dec_and_test(&vha->loop_down_timer) != 0) { |
| if (!(vha->device_flags & DFLG_NO_CABLE)) { |
| ql_log(ql_log_warn, vha, 0x6009, |
| "Loop down - aborting ISP.\n"); |
| |
| if (IS_QLA82XX(ha)) |
| set_bit(FCOE_CTX_RESET_NEEDED, |
| &vha->dpc_flags); |
| else |
| set_bit(ISP_ABORT_NEEDED, |
| &vha->dpc_flags); |
| } |
| } |
| ql_dbg(ql_dbg_timer, vha, 0x600a, |
| "Loop down - seconds remaining %d.\n", |
| atomic_read(&vha->loop_down_timer)); |
| } |
| /* Check if beacon LED needs to be blinked for physical host only */ |
| if (!vha->vp_idx && (ha->beacon_blink_led == 1)) { |
| /* There is no beacon_blink function for ISP82xx */ |
| if (!IS_P3P_TYPE(ha)) { |
| set_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags); |
| start_dpc++; |
| } |
| } |
| |
| /* Process any deferred work. */ |
| if (!list_empty(&vha->work_list)) { |
| unsigned long flags; |
| bool q = false; |
| |
| spin_lock_irqsave(&vha->work_lock, flags); |
| if (!test_and_set_bit(IOCB_WORK_ACTIVE, &vha->dpc_flags)) |
| q = true; |
| spin_unlock_irqrestore(&vha->work_lock, flags); |
| if (q) |
| queue_work(vha->hw->wq, &vha->iocb_work); |
| } |
| |
| /* |
| * FC-NVME |
| * see if the active AEN count has changed from what was last reported. |
| */ |
| if (!vha->vp_idx && |
| (atomic_read(&ha->nvme_active_aen_cnt) != ha->nvme_last_rptd_aen) && |
| ha->zio_mode == QLA_ZIO_MODE_6 && |
| !ha->flags.host_shutting_down) { |
| ql_log(ql_log_info, vha, 0x3002, |
| "nvme: Sched: Set ZIO exchange threshold to %d.\n", |
| ha->nvme_last_rptd_aen); |
| ha->nvme_last_rptd_aen = atomic_read(&ha->nvme_active_aen_cnt); |
| set_bit(SET_NVME_ZIO_THRESHOLD_NEEDED, &vha->dpc_flags); |
| start_dpc++; |
| } |
| |
| if (!vha->vp_idx && |
| (atomic_read(&ha->zio_threshold) != ha->last_zio_threshold) && |
| (ha->zio_mode == QLA_ZIO_MODE_6) && |
| (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))) { |
| ql_log(ql_log_info, vha, 0x3002, |
| "Sched: Set ZIO exchange threshold to %d.\n", |
| ha->last_zio_threshold); |
| ha->last_zio_threshold = atomic_read(&ha->zio_threshold); |
| set_bit(SET_ZIO_THRESHOLD_NEEDED, &vha->dpc_flags); |
| start_dpc++; |
| } |
| |
| /* Schedule the DPC routine if needed */ |
| if ((test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || |
| test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags) || |
| test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags) || |
| start_dpc || |
| test_bit(RESET_MARKER_NEEDED, &vha->dpc_flags) || |
| test_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags) || |
| test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags) || |
| test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags) || |
| test_bit(VP_DPC_NEEDED, &vha->dpc_flags) || |
| test_bit(RELOGIN_NEEDED, &vha->dpc_flags))) { |
| ql_dbg(ql_dbg_timer, vha, 0x600b, |
| "isp_abort_needed=%d loop_resync_needed=%d " |
| "fcport_update_needed=%d start_dpc=%d " |
| "reset_marker_needed=%d", |
| test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags), |
| test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags), |
| test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags), |
| start_dpc, |
| test_bit(RESET_MARKER_NEEDED, &vha->dpc_flags)); |
| ql_dbg(ql_dbg_timer, vha, 0x600c, |
| "beacon_blink_needed=%d isp_unrecoverable=%d " |
| "fcoe_ctx_reset_needed=%d vp_dpc_needed=%d " |
| "relogin_needed=%d.\n", |
| test_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags), |
| test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags), |
| test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags), |
| test_bit(VP_DPC_NEEDED, &vha->dpc_flags), |
| test_bit(RELOGIN_NEEDED, &vha->dpc_flags)); |
| qla2xxx_wake_dpc(vha); |
| } |
| |
| qla2x00_restart_timer(vha, WATCH_INTERVAL); |
| } |
| |
| /* Firmware interface routines. */ |
| |
| #define FW_ISP21XX 0 |
| #define FW_ISP22XX 1 |
| #define FW_ISP2300 2 |
| #define FW_ISP2322 3 |
| #define FW_ISP24XX 4 |
| #define FW_ISP25XX 5 |
| #define FW_ISP81XX 6 |
| #define FW_ISP82XX 7 |
| #define FW_ISP2031 8 |
| #define FW_ISP8031 9 |
| #define FW_ISP27XX 10 |
| #define FW_ISP28XX 11 |
| |
| #define FW_FILE_ISP21XX "ql2100_fw.bin" |
| #define FW_FILE_ISP22XX "ql2200_fw.bin" |
| #define FW_FILE_ISP2300 "ql2300_fw.bin" |
| #define FW_FILE_ISP2322 "ql2322_fw.bin" |
| #define FW_FILE_ISP24XX "ql2400_fw.bin" |
| #define FW_FILE_ISP25XX "ql2500_fw.bin" |
| #define FW_FILE_ISP81XX "ql8100_fw.bin" |
| #define FW_FILE_ISP82XX "ql8200_fw.bin" |
| #define FW_FILE_ISP2031 "ql2600_fw.bin" |
| #define FW_FILE_ISP8031 "ql8300_fw.bin" |
| #define FW_FILE_ISP27XX "ql2700_fw.bin" |
| #define FW_FILE_ISP28XX "ql2800_fw.bin" |
| |
| |
| static DEFINE_MUTEX(qla_fw_lock); |
| |
| static struct fw_blob qla_fw_blobs[] = { |
| { .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, }, |
| { .name = FW_FILE_ISP22XX, .segs = { 0x1000, 0 }, }, |
| { .name = FW_FILE_ISP2300, .segs = { 0x800, 0 }, }, |
| { .name = FW_FILE_ISP2322, .segs = { 0x800, 0x1c000, 0x1e000, 0 }, }, |
| { .name = FW_FILE_ISP24XX, }, |
| { .name = FW_FILE_ISP25XX, }, |
| { .name = FW_FILE_ISP81XX, }, |
| { .name = FW_FILE_ISP82XX, }, |
| { .name = FW_FILE_ISP2031, }, |
| { .name = FW_FILE_ISP8031, }, |
| { .name = FW_FILE_ISP27XX, }, |
| { .name = FW_FILE_ISP28XX, }, |
| { .name = NULL, }, |
| }; |
| |
| struct fw_blob * |
| qla2x00_request_firmware(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| struct fw_blob *blob; |
| |
| if (IS_QLA2100(ha)) { |
| blob = &qla_fw_blobs[FW_ISP21XX]; |
| } else if (IS_QLA2200(ha)) { |
| blob = &qla_fw_blobs[FW_ISP22XX]; |
| } else if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) { |
| blob = &qla_fw_blobs[FW_ISP2300]; |
| } else if (IS_QLA2322(ha) || IS_QLA6322(ha)) { |
| blob = &qla_fw_blobs[FW_ISP2322]; |
| } else if (IS_QLA24XX_TYPE(ha)) { |
| blob = &qla_fw_blobs[FW_ISP24XX]; |
| } else if (IS_QLA25XX(ha)) { |
| blob = &qla_fw_blobs[FW_ISP25XX]; |
| } else if (IS_QLA81XX(ha)) { |
| blob = &qla_fw_blobs[FW_ISP81XX]; |
| } else if (IS_QLA82XX(ha)) { |
| blob = &qla_fw_blobs[FW_ISP82XX]; |
| } else if (IS_QLA2031(ha)) { |
| blob = &qla_fw_blobs[FW_ISP2031]; |
| } else if (IS_QLA8031(ha)) { |
| blob = &qla_fw_blobs[FW_ISP8031]; |
| } else if (IS_QLA27XX(ha)) { |
| blob = &qla_fw_blobs[FW_ISP27XX]; |
| } else if (IS_QLA28XX(ha)) { |
| blob = &qla_fw_blobs[FW_ISP28XX]; |
| } else { |
| return NULL; |
| } |
| |
| if (!blob->name) |
| return NULL; |
| |
| mutex_lock(&qla_fw_lock); |
| if (blob->fw) |
| goto out; |
| |
| if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) { |
| ql_log(ql_log_warn, vha, 0x0063, |
| "Failed to load firmware image (%s).\n", blob->name); |
| blob->fw = NULL; |
| blob = NULL; |
| } |
| |
| out: |
| mutex_unlock(&qla_fw_lock); |
| return blob; |
| } |
| |
| static void |
| qla2x00_release_firmware(void) |
| { |
| struct fw_blob *blob; |
| |
| mutex_lock(&qla_fw_lock); |
| for (blob = qla_fw_blobs; blob->name; blob++) |
| release_firmware(blob->fw); |
| mutex_unlock(&qla_fw_lock); |
| } |
| |
| static void qla_pci_error_cleanup(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); |
| struct qla_qpair *qpair = NULL; |
| struct scsi_qla_host *vp; |
| fc_port_t *fcport; |
| int i; |
| unsigned long flags; |
| |
| ha->chip_reset++; |
| |
| ha->base_qpair->chip_reset = ha->chip_reset; |
| for (i = 0; i < ha->max_qpairs; i++) { |
| if (ha->queue_pair_map[i]) |
| ha->queue_pair_map[i]->chip_reset = |
| ha->base_qpair->chip_reset; |
| } |
| |
| /* purge MBox commands */ |
| if (atomic_read(&ha->num_pend_mbx_stage3)) { |
| clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); |
| complete(&ha->mbx_intr_comp); |
| } |
| |
| i = 0; |
| |
| while (atomic_read(&ha->num_pend_mbx_stage3) || |
| atomic_read(&ha->num_pend_mbx_stage2) || |
| atomic_read(&ha->num_pend_mbx_stage1)) { |
| msleep(20); |
| i++; |
| if (i > 50) |
| break; |
| } |
| |
| ha->flags.purge_mbox = 0; |
| |
| mutex_lock(&ha->mq_lock); |
| list_for_each_entry(qpair, &base_vha->qp_list, qp_list_elem) |
| qpair->online = 0; |
| mutex_unlock(&ha->mq_lock); |
| |
| qla2x00_mark_all_devices_lost(vha, 0); |
| |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| list_for_each_entry(vp, &ha->vp_list, list) { |
| atomic_inc(&vp->vref_count); |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| qla2x00_mark_all_devices_lost(vp, 0); |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| atomic_dec(&vp->vref_count); |
| } |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| |
| /* Clear all async request states across all VPs. */ |
| list_for_each_entry(fcport, &vha->vp_fcports, list) |
| fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT); |
| |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| list_for_each_entry(vp, &ha->vp_list, list) { |
| atomic_inc(&vp->vref_count); |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| list_for_each_entry(fcport, &vp->vp_fcports, list) |
| fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT); |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| atomic_dec(&vp->vref_count); |
| } |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| } |
| |
| |
| static pci_ers_result_t |
| qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) |
| { |
| scsi_qla_host_t *vha = pci_get_drvdata(pdev); |
| struct qla_hw_data *ha = vha->hw; |
| |
| ql_dbg(ql_dbg_aer, vha, 0x9000, |
| "PCI error detected, state %x.\n", state); |
| |
| if (!atomic_read(&pdev->enable_cnt)) { |
| ql_log(ql_log_info, vha, 0xffff, |
| "PCI device is disabled,state %x\n", state); |
| return PCI_ERS_RESULT_NEED_RESET; |
| } |
| |
| switch (state) { |
| case pci_channel_io_normal: |
| ha->flags.eeh_busy = 0; |
| if (ql2xmqsupport || ql2xnvmeenable) { |
| set_bit(QPAIR_ONLINE_CHECK_NEEDED, &vha->dpc_flags); |
| qla2xxx_wake_dpc(vha); |
| } |
| return PCI_ERS_RESULT_CAN_RECOVER; |
| case pci_channel_io_frozen: |
| ha->flags.eeh_busy = 1; |
| qla_pci_error_cleanup(vha); |
| return PCI_ERS_RESULT_NEED_RESET; |
| case pci_channel_io_perm_failure: |
| ha->flags.pci_channel_io_perm_failure = 1; |
| qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16); |
| if (ql2xmqsupport || ql2xnvmeenable) { |
| set_bit(QPAIR_ONLINE_CHECK_NEEDED, &vha->dpc_flags); |
| qla2xxx_wake_dpc(vha); |
| } |
| return PCI_ERS_RESULT_DISCONNECT; |
| } |
| return PCI_ERS_RESULT_NEED_RESET; |
| } |
| |
| static pci_ers_result_t |
| qla2xxx_pci_mmio_enabled(struct pci_dev *pdev) |
| { |
| int risc_paused = 0; |
| uint32_t stat; |
| unsigned long flags; |
| scsi_qla_host_t *base_vha = pci_get_drvdata(pdev); |
| struct qla_hw_data *ha = base_vha->hw; |
| struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24; |
| |
| if (IS_QLA82XX(ha)) |
| return PCI_ERS_RESULT_RECOVERED; |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| if (IS_QLA2100(ha) || IS_QLA2200(ha)){ |
| stat = RD_REG_DWORD(®->hccr); |
| if (stat & HCCR_RISC_PAUSE) |
| risc_paused = 1; |
| } else if (IS_QLA23XX(ha)) { |
| stat = RD_REG_DWORD(®->u.isp2300.host_status); |
| if (stat & HSR_RISC_PAUSED) |
| risc_paused = 1; |
| } else if (IS_FWI2_CAPABLE(ha)) { |
| stat = RD_REG_DWORD(®24->host_status); |
| if (stat & HSRX_RISC_PAUSED) |
| risc_paused = 1; |
| } |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| if (risc_paused) { |
| ql_log(ql_log_info, base_vha, 0x9003, |
| "RISC paused -- mmio_enabled, Dumping firmware.\n"); |
| ha->isp_ops->fw_dump(base_vha, 0); |
| |
| return PCI_ERS_RESULT_NEED_RESET; |
| } else |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| static pci_ers_result_t |
| qla2xxx_pci_slot_reset(struct pci_dev *pdev) |
| { |
| pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT; |
| scsi_qla_host_t *base_vha = pci_get_drvdata(pdev); |
| struct qla_hw_data *ha = base_vha->hw; |
| int rc; |
| struct qla_qpair *qpair = NULL; |
| |
| ql_dbg(ql_dbg_aer, base_vha, 0x9004, |
| "Slot Reset.\n"); |
| |
| /* Workaround: qla2xxx driver which access hardware earlier |
| * needs error state to be pci_channel_io_online. |
| * Otherwise mailbox command timesout. |
| */ |
| pdev->error_state = pci_channel_io_normal; |
| |
| pci_restore_state(pdev); |
| |
| /* pci_restore_state() clears the saved_state flag of the device |
| * save restored state which resets saved_state flag |
| */ |
| pci_save_state(pdev); |
| |
| if (ha->mem_only) |
| rc = pci_enable_device_mem(pdev); |
| else |
| rc = pci_enable_device(pdev); |
| |
| if (rc) { |
| ql_log(ql_log_warn, base_vha, 0x9005, |
| "Can't re-enable PCI device after reset.\n"); |
| goto exit_slot_reset; |
| } |
| |
| |
| if (ha->isp_ops->pci_config(base_vha)) |
| goto exit_slot_reset; |
| |
| mutex_lock(&ha->mq_lock); |
| list_for_each_entry(qpair, &base_vha->qp_list, qp_list_elem) |
| qpair->online = 1; |
| mutex_unlock(&ha->mq_lock); |
| |
| base_vha->flags.online = 1; |
| set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); |
| if (ha->isp_ops->abort_isp(base_vha) == QLA_SUCCESS) |
| ret = PCI_ERS_RESULT_RECOVERED; |
| clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); |
| |
| |
| exit_slot_reset: |
| ql_dbg(ql_dbg_aer, base_vha, 0x900e, |
| "slot_reset return %x.\n", ret); |
| |
| return ret; |
| } |
| |
| static void |
| qla2xxx_pci_resume(struct pci_dev *pdev) |
| { |
| scsi_qla_host_t *base_vha = pci_get_drvdata(pdev); |
| struct qla_hw_data *ha = base_vha->hw; |
| int ret; |
| |
| ql_dbg(ql_dbg_aer, base_vha, 0x900f, |
| "pci_resume.\n"); |
| |
| ha->flags.eeh_busy = 0; |
| |
| ret = qla2x00_wait_for_hba_online(base_vha); |
| if (ret != QLA_SUCCESS) { |
| ql_log(ql_log_fatal, base_vha, 0x9002, |
| "The device failed to resume I/O from slot/link_reset.\n"); |
| } |
| } |
| |
| static void |
| qla_pci_reset_prepare(struct pci_dev *pdev) |
| { |
| scsi_qla_host_t *base_vha = pci_get_drvdata(pdev); |
| struct qla_hw_data *ha = base_vha->hw; |
| struct qla_qpair *qpair; |
| |
| ql_log(ql_log_warn, base_vha, 0xffff, |
| "%s.\n", __func__); |
| |
| /* |
| * PCI FLR/function reset is about to reset the |
| * slot. Stop the chip to stop all DMA access. |
| * It is assumed that pci_reset_done will be called |
| * after FLR to resume Chip operation. |
| */ |
| ha->flags.eeh_busy = 1; |
| mutex_lock(&ha->mq_lock); |
| list_for_each_entry(qpair, &base_vha->qp_list, qp_list_elem) |
| qpair->online = 0; |
| mutex_unlock(&ha->mq_lock); |
| |
| set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); |
| qla2x00_abort_isp_cleanup(base_vha); |
| qla2x00_abort_all_cmds(base_vha, DID_RESET << 16); |
| } |
| |
| static void |
| qla_pci_reset_done(struct pci_dev *pdev) |
| { |
| scsi_qla_host_t *base_vha = pci_get_drvdata(pdev); |
| struct qla_hw_data *ha = base_vha->hw; |
| struct qla_qpair *qpair; |
| |
| ql_log(ql_log_warn, base_vha, 0xffff, |
| "%s.\n", __func__); |
| |
| /* |
| * FLR just completed by PCI layer. Resume adapter |
| */ |
| ha->flags.eeh_busy = 0; |
| mutex_lock(&ha->mq_lock); |
| list_for_each_entry(qpair, &base_vha->qp_list, qp_list_elem) |
| qpair->online = 1; |
| mutex_unlock(&ha->mq_lock); |
| |
| base_vha->flags.online = 1; |
| ha->isp_ops->abort_isp(base_vha); |
| clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); |
| } |
| |
| static int qla2xxx_map_queues(struct Scsi_Host *shost) |
| { |
| int rc; |
| scsi_qla_host_t *vha = (scsi_qla_host_t *)shost->hostdata; |
| struct blk_mq_queue_map *qmap = &shost->tag_set.map[HCTX_TYPE_DEFAULT]; |
| |
| if (USER_CTRL_IRQ(vha->hw) || !vha->hw->mqiobase) |
| rc = blk_mq_map_queues(qmap); |
| else |
| rc = blk_mq_pci_map_queues(qmap, vha->hw->pdev, vha->irq_offset); |
| return rc; |
| } |
| |
| struct scsi_host_template qla2xxx_driver_template = { |
| .module = THIS_MODULE, |
| .name = QLA2XXX_DRIVER_NAME, |
| .queuecommand = qla2xxx_queuecommand, |
| |
| .eh_timed_out = fc_eh_timed_out, |
| .eh_abort_handler = qla2xxx_eh_abort, |
| .eh_device_reset_handler = qla2xxx_eh_device_reset, |
| .eh_target_reset_handler = qla2xxx_eh_target_reset, |
| .eh_bus_reset_handler = qla2xxx_eh_bus_reset, |
| .eh_host_reset_handler = qla2xxx_eh_host_reset, |
| |
| .slave_configure = qla2xxx_slave_configure, |
| |
| .slave_alloc = qla2xxx_slave_alloc, |
| .slave_destroy = qla2xxx_slave_destroy, |
| .scan_finished = qla2xxx_scan_finished, |
| .scan_start = qla2xxx_scan_start, |
| .change_queue_depth = scsi_change_queue_depth, |
| .map_queues = qla2xxx_map_queues, |
| .this_id = -1, |
| .cmd_per_lun = 3, |
| .sg_tablesize = SG_ALL, |
| |
| .max_sectors = 0xFFFF, |
| .shost_attrs = qla2x00_host_attrs, |
| |
| .supported_mode = MODE_INITIATOR, |
| .track_queue_depth = 1, |
| .cmd_size = sizeof(srb_t), |
| }; |
| |
| static const struct pci_error_handlers qla2xxx_err_handler = { |
| .error_detected = qla2xxx_pci_error_detected, |
| .mmio_enabled = qla2xxx_pci_mmio_enabled, |
| .slot_reset = qla2xxx_pci_slot_reset, |
| .resume = qla2xxx_pci_resume, |
| .reset_prepare = qla_pci_reset_prepare, |
| .reset_done = qla_pci_reset_done, |
| }; |
| |
| static struct pci_device_id qla2xxx_pci_tbl[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8432) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5422) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2532) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2031) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8001) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8021) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8031) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISPF001) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8044) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2071) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2271) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2261) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2061) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2081) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2281) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2089) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2289) }, |
| { 0 }, |
| }; |
| MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl); |
| |
| static struct pci_driver qla2xxx_pci_driver = { |
| .name = QLA2XXX_DRIVER_NAME, |
| .driver = { |
| .owner = THIS_MODULE, |
| }, |
| .id_table = qla2xxx_pci_tbl, |
| .probe = qla2x00_probe_one, |
| .remove = qla2x00_remove_one, |
| .shutdown = qla2x00_shutdown, |
| .err_handler = &qla2xxx_err_handler, |
| }; |
| |
| static const struct file_operations apidev_fops = { |
| .owner = THIS_MODULE, |
| .llseek = noop_llseek, |
| }; |
| |
| /** |
| * qla2x00_module_init - Module initialization. |
| **/ |
| static int __init |
| qla2x00_module_init(void) |
| { |
| int ret = 0; |
| |
| BUILD_BUG_ON(sizeof(cmd_entry_t) != 64); |
| BUILD_BUG_ON(sizeof(cont_a64_entry_t) != 64); |
| BUILD_BUG_ON(sizeof(cont_entry_t) != 64); |
| BUILD_BUG_ON(sizeof(init_cb_t) != 96); |
| BUILD_BUG_ON(sizeof(ms_iocb_entry_t) != 64); |
| BUILD_BUG_ON(sizeof(request_t) != 64); |
| BUILD_BUG_ON(sizeof(struct access_chip_84xx) != 64); |
| BUILD_BUG_ON(sizeof(struct cmd_bidir) != 64); |
| BUILD_BUG_ON(sizeof(struct cmd_nvme) != 64); |
| BUILD_BUG_ON(sizeof(struct cmd_type_6) != 64); |
| BUILD_BUG_ON(sizeof(struct cmd_type_7) != 64); |
| BUILD_BUG_ON(sizeof(struct cmd_type_7_fx00) != 64); |
| BUILD_BUG_ON(sizeof(struct cmd_type_crc_2) != 64); |
| BUILD_BUG_ON(sizeof(struct ct_entry_24xx) != 64); |
| BUILD_BUG_ON(sizeof(struct ctio_crc2_to_fw) != 64); |
| BUILD_BUG_ON(sizeof(struct els_entry_24xx) != 64); |
| BUILD_BUG_ON(sizeof(struct fxdisc_entry_fx00) != 64); |
| BUILD_BUG_ON(sizeof(struct init_cb_24xx) != 128); |
| BUILD_BUG_ON(sizeof(struct init_cb_81xx) != 128); |
| BUILD_BUG_ON(sizeof(struct pt_ls4_request) != 64); |
| BUILD_BUG_ON(sizeof(struct sns_cmd_pkt) != 2064); |
| BUILD_BUG_ON(sizeof(struct verify_chip_entry_84xx) != 64); |
| BUILD_BUG_ON(sizeof(struct vf_evfp_entry_24xx) != 56); |
| |
| /* Allocate cache for SRBs. */ |
| srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0, |
| SLAB_HWCACHE_ALIGN, NULL); |
| if (srb_cachep == NULL) { |
| ql_log(ql_log_fatal, NULL, 0x0001, |
| "Unable to allocate SRB cache...Failing load!.\n"); |
| return -ENOMEM; |
| } |
| |
| /* Initialize target kmem_cache and mem_pools */ |
| ret = qlt_init(); |
| if (ret < 0) { |
| goto destroy_cache; |
| } else if (ret > 0) { |
| /* |
| * If initiator mode is explictly disabled by qlt_init(), |
| * prevent scsi_transport_fc.c:fc_scsi_scan_rport() from |
| * performing scsi_scan_target() during LOOP UP event. |
| */ |
| qla2xxx_transport_functions.disable_target_scan = 1; |
| qla2xxx_transport_vport_functions.disable_target_scan = 1; |
| } |
| |
| /* Derive version string. */ |
| strcpy(qla2x00_version_str, QLA2XXX_VERSION); |
| if (ql2xextended_error_logging) |
| strcat(qla2x00_version_str, "-debug"); |
| if (ql2xextended_error_logging == 1) |
| ql2xextended_error_logging = QL_DBG_DEFAULT1_MASK; |
| |
| if (ql2x_ini_mode == QLA2XXX_INI_MODE_DUAL) |
| qla_insert_tgt_attrs(); |
| |
| qla2xxx_transport_template = |
| fc_attach_transport(&qla2xxx_transport_functions); |
| if (!qla2xxx_transport_template) { |
| ql_log(ql_log_fatal, NULL, 0x0002, |
| "fc_attach_transport failed...Failing load!.\n"); |
| ret = -ENODEV; |
| goto qlt_exit; |
| } |
| |
| apidev_major = register_chrdev(0, QLA2XXX_APIDEV, &apidev_fops); |
| if (apidev_major < 0) { |
| ql_log(ql_log_fatal, NULL, 0x0003, |
| "Unable to register char device %s.\n", QLA2XXX_APIDEV); |
| } |
| |
| qla2xxx_transport_vport_template = |
| fc_attach_transport(&qla2xxx_transport_vport_functions); |
| if (!qla2xxx_transport_vport_template) { |
| ql_log(ql_log_fatal, NULL, 0x0004, |
| "fc_attach_transport vport failed...Failing load!.\n"); |
| ret = -ENODEV; |
| goto unreg_chrdev; |
| } |
| ql_log(ql_log_info, NULL, 0x0005, |
| "QLogic Fibre Channel HBA Driver: %s.\n", |
| qla2x00_version_str); |
| ret = pci_register_driver(&qla2xxx_pci_driver); |
| if (ret) { |
| ql_log(ql_log_fatal, NULL, 0x0006, |
| "pci_register_driver failed...ret=%d Failing load!.\n", |
| ret); |
| goto release_vport_transport; |
| } |
| return ret; |
| |
| release_vport_transport: |
| fc_release_transport(qla2xxx_transport_vport_template); |
| |
| unreg_chrdev: |
| if (apidev_major >= 0) |
| unregister_chrdev(apidev_major, QLA2XXX_APIDEV); |
| fc_release_transport(qla2xxx_transport_template); |
| |
| qlt_exit: |
| qlt_exit(); |
| |
| destroy_cache: |
| kmem_cache_destroy(srb_cachep); |
| return ret; |
| } |
| |
| /** |
| * qla2x00_module_exit - Module cleanup. |
| **/ |
| static void __exit |
| qla2x00_module_exit(void) |
| { |
| pci_unregister_driver(&qla2xxx_pci_driver); |
| qla2x00_release_firmware(); |
| kmem_cache_destroy(ctx_cachep); |
| fc_release_transport(qla2xxx_transport_vport_template); |
| if (apidev_major >= 0) |
| unregister_chrdev(apidev_major, QLA2XXX_APIDEV); |
| fc_release_transport(qla2xxx_transport_template); |
| qlt_exit(); |
| kmem_cache_destroy(srb_cachep); |
| } |
| |
| module_init(qla2x00_module_init); |
| module_exit(qla2x00_module_exit); |
| |
| MODULE_AUTHOR("QLogic Corporation"); |
| MODULE_DESCRIPTION("QLogic Fibre Channel HBA Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(QLA2XXX_VERSION); |
| MODULE_FIRMWARE(FW_FILE_ISP21XX); |
| MODULE_FIRMWARE(FW_FILE_ISP22XX); |
| MODULE_FIRMWARE(FW_FILE_ISP2300); |
| MODULE_FIRMWARE(FW_FILE_ISP2322); |
| MODULE_FIRMWARE(FW_FILE_ISP24XX); |
| MODULE_FIRMWARE(FW_FILE_ISP25XX); |