blob: 4707294d8f596888eb1a3063106bcfe71ce237c0 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/cdns,qspi-nor.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cadence Quad SPI controller
maintainers:
- Vaishnav Achath <vaishnav.a@ti.com>
allOf:
- $ref: spi-controller.yaml#
- if:
properties:
compatible:
contains:
const: xlnx,versal-ospi-1.0
then:
required:
- power-domains
properties:
compatible:
oneOf:
- items:
- enum:
- ti,k2g-qspi
- ti,am654-ospi
- intel,lgm-qspi
- xlnx,versal-ospi-1.0
- intel,socfpga-qspi
- const: cdns,qspi-nor
- const: cdns,qspi-nor
reg:
items:
- description: the controller register set
- description: the controller data area
interrupts:
maxItems: 1
clocks:
maxItems: 1
cdns,fifo-depth:
description:
Size of the data FIFO in words.
$ref: "/schemas/types.yaml#/definitions/uint32"
enum: [ 128, 256 ]
default: 128
cdns,fifo-width:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Bus width of the data FIFO in bytes.
default: 4
cdns,trigger-address:
$ref: /schemas/types.yaml#/definitions/uint32
description:
32-bit indirect AHB trigger address.
cdns,is-decoded-cs:
type: boolean
description:
Flag to indicate whether decoder is used to select different chip select
for different memory regions.
cdns,rclk-en:
type: boolean
description:
Flag to indicate that QSPI return clock is used to latch the read
data rather than the QSPI clock. Make sure that QSPI return clock
is populated on the board before using this property.
power-domains:
maxItems: 1
resets:
maxItems: 2
reset-names:
minItems: 1
maxItems: 2
items:
enum: [ qspi, qspi-ocp ]
required:
- compatible
- reg
- interrupts
- clocks
- cdns,fifo-depth
- cdns,fifo-width
- cdns,trigger-address
- '#address-cells'
- '#size-cells'
unevaluatedProperties: false
examples:
- |
qspi: spi@ff705000 {
compatible = "cdns,qspi-nor";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xff705000 0x1000>,
<0xffa00000 0x1000>;
interrupts = <0 151 4>;
clocks = <&qspi_clk>;
cdns,fifo-depth = <128>;
cdns,fifo-width = <4>;
cdns,trigger-address = <0x00000000>;
resets = <&rst 0x1>, <&rst 0x2>;
reset-names = "qspi", "qspi-ocp";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
};
};