| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Microchip ENCX24J600 ethernet driver |
| * |
| * Copyright (C) 2015 Gridpoint |
| * Author: Jon Ringle <jringle@gridpoint.com> |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/errno.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/regmap.h> |
| #include <linux/skbuff.h> |
| #include <linux/spi/spi.h> |
| |
| #include "encx24j600_hw.h" |
| |
| #define DRV_NAME "encx24j600" |
| #define DRV_VERSION "1.0" |
| |
| #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK) |
| static int debug = -1; |
| module_param(debug, int, 0000); |
| MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); |
| |
| /* SRAM memory layout: |
| * |
| * 0x0000-0x05ff TX buffers 1.5KB (1*1536) reside in the GP area in SRAM |
| * 0x0600-0x5fff RX buffers 22.5KB (15*1536) reside in the RX area in SRAM |
| */ |
| #define ENC_TX_BUF_START 0x0000U |
| #define ENC_RX_BUF_START 0x0600U |
| #define ENC_RX_BUF_END 0x5fffU |
| #define ENC_SRAM_SIZE 0x6000U |
| |
| enum { |
| RXFILTER_NORMAL, |
| RXFILTER_MULTI, |
| RXFILTER_PROMISC |
| }; |
| |
| struct encx24j600_priv { |
| struct net_device *ndev; |
| struct mutex lock; /* device access lock */ |
| struct encx24j600_context ctx; |
| struct sk_buff *tx_skb; |
| struct task_struct *kworker_task; |
| struct kthread_worker kworker; |
| struct kthread_work tx_work; |
| struct kthread_work setrx_work; |
| u16 next_packet; |
| bool hw_enabled; |
| bool full_duplex; |
| bool autoneg; |
| u16 speed; |
| int rxfilter; |
| u32 msg_enable; |
| }; |
| |
| static void dump_packet(const char *msg, int len, const char *data) |
| { |
| pr_debug(DRV_NAME ": %s - packet len:%d\n", msg, len); |
| print_hex_dump_bytes("pk data: ", DUMP_PREFIX_OFFSET, data, len); |
| } |
| |
| static void encx24j600_dump_rsv(struct encx24j600_priv *priv, const char *msg, |
| struct rsv *rsv) |
| { |
| struct net_device *dev = priv->ndev; |
| |
| netdev_info(dev, "RX packet Len:%d\n", rsv->len); |
| netdev_dbg(dev, "%s - NextPk: 0x%04x\n", msg, |
| rsv->next_packet); |
| netdev_dbg(dev, "RxOK: %d, DribbleNibble: %d\n", |
| RSV_GETBIT(rsv->rxstat, RSV_RXOK), |
| RSV_GETBIT(rsv->rxstat, RSV_DRIBBLENIBBLE)); |
| netdev_dbg(dev, "CRCErr:%d, LenChkErr: %d, LenOutOfRange: %d\n", |
| RSV_GETBIT(rsv->rxstat, RSV_CRCERROR), |
| RSV_GETBIT(rsv->rxstat, RSV_LENCHECKERR), |
| RSV_GETBIT(rsv->rxstat, RSV_LENOUTOFRANGE)); |
| netdev_dbg(dev, "Multicast: %d, Broadcast: %d, LongDropEvent: %d, CarrierEvent: %d\n", |
| RSV_GETBIT(rsv->rxstat, RSV_RXMULTICAST), |
| RSV_GETBIT(rsv->rxstat, RSV_RXBROADCAST), |
| RSV_GETBIT(rsv->rxstat, RSV_RXLONGEVDROPEV), |
| RSV_GETBIT(rsv->rxstat, RSV_CARRIEREV)); |
| netdev_dbg(dev, "ControlFrame: %d, PauseFrame: %d, UnknownOp: %d, VLanTagFrame: %d\n", |
| RSV_GETBIT(rsv->rxstat, RSV_RXCONTROLFRAME), |
| RSV_GETBIT(rsv->rxstat, RSV_RXPAUSEFRAME), |
| RSV_GETBIT(rsv->rxstat, RSV_RXUNKNOWNOPCODE), |
| RSV_GETBIT(rsv->rxstat, RSV_RXTYPEVLAN)); |
| } |
| |
| static u16 encx24j600_read_reg(struct encx24j600_priv *priv, u8 reg) |
| { |
| struct net_device *dev = priv->ndev; |
| unsigned int val = 0; |
| int ret = regmap_read(priv->ctx.regmap, reg, &val); |
| |
| if (unlikely(ret)) |
| netif_err(priv, drv, dev, "%s: error %d reading reg %02x\n", |
| __func__, ret, reg); |
| return val; |
| } |
| |
| static void encx24j600_write_reg(struct encx24j600_priv *priv, u8 reg, u16 val) |
| { |
| struct net_device *dev = priv->ndev; |
| int ret = regmap_write(priv->ctx.regmap, reg, val); |
| |
| if (unlikely(ret)) |
| netif_err(priv, drv, dev, "%s: error %d writing reg %02x=%04x\n", |
| __func__, ret, reg, val); |
| } |
| |
| static void encx24j600_update_reg(struct encx24j600_priv *priv, u8 reg, |
| u16 mask, u16 val) |
| { |
| struct net_device *dev = priv->ndev; |
| int ret = regmap_update_bits(priv->ctx.regmap, reg, mask, val); |
| |
| if (unlikely(ret)) |
| netif_err(priv, drv, dev, "%s: error %d updating reg %02x=%04x~%04x\n", |
| __func__, ret, reg, val, mask); |
| } |
| |
| static u16 encx24j600_read_phy(struct encx24j600_priv *priv, u8 reg) |
| { |
| struct net_device *dev = priv->ndev; |
| unsigned int val = 0; |
| int ret = regmap_read(priv->ctx.phymap, reg, &val); |
| |
| if (unlikely(ret)) |
| netif_err(priv, drv, dev, "%s: error %d reading %02x\n", |
| __func__, ret, reg); |
| return val; |
| } |
| |
| static void encx24j600_write_phy(struct encx24j600_priv *priv, u8 reg, u16 val) |
| { |
| struct net_device *dev = priv->ndev; |
| int ret = regmap_write(priv->ctx.phymap, reg, val); |
| |
| if (unlikely(ret)) |
| netif_err(priv, drv, dev, "%s: error %d writing reg %02x=%04x\n", |
| __func__, ret, reg, val); |
| } |
| |
| static void encx24j600_clr_bits(struct encx24j600_priv *priv, u8 reg, u16 mask) |
| { |
| encx24j600_update_reg(priv, reg, mask, 0); |
| } |
| |
| static void encx24j600_set_bits(struct encx24j600_priv *priv, u8 reg, u16 mask) |
| { |
| encx24j600_update_reg(priv, reg, mask, mask); |
| } |
| |
| static void encx24j600_cmd(struct encx24j600_priv *priv, u8 cmd) |
| { |
| struct net_device *dev = priv->ndev; |
| int ret = regmap_write(priv->ctx.regmap, cmd, 0); |
| |
| if (unlikely(ret)) |
| netif_err(priv, drv, dev, "%s: error %d with cmd %02x\n", |
| __func__, ret, cmd); |
| } |
| |
| static int encx24j600_raw_read(struct encx24j600_priv *priv, u8 reg, u8 *data, |
| size_t count) |
| { |
| int ret; |
| |
| mutex_lock(&priv->ctx.mutex); |
| ret = regmap_encx24j600_spi_read(&priv->ctx, reg, data, count); |
| mutex_unlock(&priv->ctx.mutex); |
| |
| return ret; |
| } |
| |
| static int encx24j600_raw_write(struct encx24j600_priv *priv, u8 reg, |
| const u8 *data, size_t count) |
| { |
| int ret; |
| |
| mutex_lock(&priv->ctx.mutex); |
| ret = regmap_encx24j600_spi_write(&priv->ctx, reg, data, count); |
| mutex_unlock(&priv->ctx.mutex); |
| |
| return ret; |
| } |
| |
| static void encx24j600_update_phcon1(struct encx24j600_priv *priv) |
| { |
| u16 phcon1 = encx24j600_read_phy(priv, PHCON1); |
| |
| if (priv->autoneg == AUTONEG_ENABLE) { |
| phcon1 |= ANEN | RENEG; |
| } else { |
| phcon1 &= ~ANEN; |
| if (priv->speed == SPEED_100) |
| phcon1 |= SPD100; |
| else |
| phcon1 &= ~SPD100; |
| |
| if (priv->full_duplex) |
| phcon1 |= PFULDPX; |
| else |
| phcon1 &= ~PFULDPX; |
| } |
| encx24j600_write_phy(priv, PHCON1, phcon1); |
| } |
| |
| /* Waits for autonegotiation to complete. */ |
| static int encx24j600_wait_for_autoneg(struct encx24j600_priv *priv) |
| { |
| struct net_device *dev = priv->ndev; |
| unsigned long timeout = jiffies + msecs_to_jiffies(2000); |
| u16 phstat1; |
| u16 estat; |
| |
| phstat1 = encx24j600_read_phy(priv, PHSTAT1); |
| while ((phstat1 & ANDONE) == 0) { |
| if (time_after(jiffies, timeout)) { |
| u16 phstat3; |
| |
| netif_notice(priv, drv, dev, "timeout waiting for autoneg done\n"); |
| |
| priv->autoneg = AUTONEG_DISABLE; |
| phstat3 = encx24j600_read_phy(priv, PHSTAT3); |
| priv->speed = (phstat3 & PHY3SPD100) |
| ? SPEED_100 : SPEED_10; |
| priv->full_duplex = (phstat3 & PHY3DPX) ? 1 : 0; |
| encx24j600_update_phcon1(priv); |
| netif_notice(priv, drv, dev, "Using parallel detection: %s/%s", |
| priv->speed == SPEED_100 ? "100" : "10", |
| priv->full_duplex ? "Full" : "Half"); |
| |
| return -ETIMEDOUT; |
| } |
| cpu_relax(); |
| phstat1 = encx24j600_read_phy(priv, PHSTAT1); |
| } |
| |
| estat = encx24j600_read_reg(priv, ESTAT); |
| if (estat & PHYDPX) { |
| encx24j600_set_bits(priv, MACON2, FULDPX); |
| encx24j600_write_reg(priv, MABBIPG, 0x15); |
| } else { |
| encx24j600_clr_bits(priv, MACON2, FULDPX); |
| encx24j600_write_reg(priv, MABBIPG, 0x12); |
| /* Max retransmittions attempt */ |
| encx24j600_write_reg(priv, MACLCON, 0x370f); |
| } |
| |
| return 0; |
| } |
| |
| /* Access the PHY to determine link status */ |
| static void encx24j600_check_link_status(struct encx24j600_priv *priv) |
| { |
| struct net_device *dev = priv->ndev; |
| u16 estat; |
| |
| estat = encx24j600_read_reg(priv, ESTAT); |
| |
| if (estat & PHYLNK) { |
| if (priv->autoneg == AUTONEG_ENABLE) |
| encx24j600_wait_for_autoneg(priv); |
| |
| netif_carrier_on(dev); |
| netif_info(priv, ifup, dev, "link up\n"); |
| } else { |
| netif_info(priv, ifdown, dev, "link down\n"); |
| |
| /* Re-enable autoneg since we won't know what we might be |
| * connected to when the link is brought back up again. |
| */ |
| priv->autoneg = AUTONEG_ENABLE; |
| priv->full_duplex = true; |
| priv->speed = SPEED_100; |
| netif_carrier_off(dev); |
| } |
| } |
| |
| static void encx24j600_int_link_handler(struct encx24j600_priv *priv) |
| { |
| struct net_device *dev = priv->ndev; |
| |
| netif_dbg(priv, intr, dev, "%s", __func__); |
| encx24j600_check_link_status(priv); |
| encx24j600_clr_bits(priv, EIR, LINKIF); |
| } |
| |
| static void encx24j600_tx_complete(struct encx24j600_priv *priv, bool err) |
| { |
| struct net_device *dev = priv->ndev; |
| |
| if (!priv->tx_skb) { |
| BUG(); |
| return; |
| } |
| |
| mutex_lock(&priv->lock); |
| |
| if (err) |
| dev->stats.tx_errors++; |
| else |
| dev->stats.tx_packets++; |
| |
| dev->stats.tx_bytes += priv->tx_skb->len; |
| |
| encx24j600_clr_bits(priv, EIR, TXIF | TXABTIF); |
| |
| netif_dbg(priv, tx_done, dev, "TX Done%s\n", err ? ": Err" : ""); |
| |
| dev_kfree_skb(priv->tx_skb); |
| priv->tx_skb = NULL; |
| |
| netif_wake_queue(dev); |
| |
| mutex_unlock(&priv->lock); |
| } |
| |
| static int encx24j600_receive_packet(struct encx24j600_priv *priv, |
| struct rsv *rsv) |
| { |
| struct net_device *dev = priv->ndev; |
| struct sk_buff *skb = netdev_alloc_skb(dev, rsv->len + NET_IP_ALIGN); |
| |
| if (!skb) { |
| pr_err_ratelimited("RX: OOM: packet dropped\n"); |
| dev->stats.rx_dropped++; |
| return -ENOMEM; |
| } |
| skb_reserve(skb, NET_IP_ALIGN); |
| encx24j600_raw_read(priv, RRXDATA, skb_put(skb, rsv->len), rsv->len); |
| |
| if (netif_msg_pktdata(priv)) |
| dump_packet("RX", skb->len, skb->data); |
| |
| skb->dev = dev; |
| skb->protocol = eth_type_trans(skb, dev); |
| skb->ip_summed = CHECKSUM_COMPLETE; |
| |
| /* Maintain stats */ |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += rsv->len; |
| |
| netif_rx(skb); |
| |
| return 0; |
| } |
| |
| static void encx24j600_rx_packets(struct encx24j600_priv *priv, u8 packet_count) |
| { |
| struct net_device *dev = priv->ndev; |
| |
| while (packet_count--) { |
| struct rsv rsv; |
| u16 newrxtail; |
| |
| encx24j600_write_reg(priv, ERXRDPT, priv->next_packet); |
| encx24j600_raw_read(priv, RRXDATA, (u8 *)&rsv, sizeof(rsv)); |
| |
| if (netif_msg_rx_status(priv)) |
| encx24j600_dump_rsv(priv, __func__, &rsv); |
| |
| if (!RSV_GETBIT(rsv.rxstat, RSV_RXOK) || |
| (rsv.len > MAX_FRAMELEN)) { |
| netif_err(priv, rx_err, dev, "RX Error %04x\n", |
| rsv.rxstat); |
| dev->stats.rx_errors++; |
| |
| if (RSV_GETBIT(rsv.rxstat, RSV_CRCERROR)) |
| dev->stats.rx_crc_errors++; |
| if (RSV_GETBIT(rsv.rxstat, RSV_LENCHECKERR)) |
| dev->stats.rx_frame_errors++; |
| if (rsv.len > MAX_FRAMELEN) |
| dev->stats.rx_over_errors++; |
| } else { |
| encx24j600_receive_packet(priv, &rsv); |
| } |
| |
| priv->next_packet = rsv.next_packet; |
| |
| newrxtail = priv->next_packet - 2; |
| if (newrxtail == ENC_RX_BUF_START) |
| newrxtail = SRAM_SIZE - 2; |
| |
| encx24j600_cmd(priv, SETPKTDEC); |
| encx24j600_write_reg(priv, ERXTAIL, newrxtail); |
| } |
| } |
| |
| static irqreturn_t encx24j600_isr(int irq, void *dev_id) |
| { |
| struct encx24j600_priv *priv = dev_id; |
| struct net_device *dev = priv->ndev; |
| int eir; |
| |
| /* Clear interrupts */ |
| encx24j600_cmd(priv, CLREIE); |
| |
| eir = encx24j600_read_reg(priv, EIR); |
| |
| if (eir & LINKIF) |
| encx24j600_int_link_handler(priv); |
| |
| if (eir & TXIF) |
| encx24j600_tx_complete(priv, false); |
| |
| if (eir & TXABTIF) |
| encx24j600_tx_complete(priv, true); |
| |
| if (eir & RXABTIF) { |
| if (eir & PCFULIF) { |
| /* Packet counter is full */ |
| netif_err(priv, rx_err, dev, "Packet counter full\n"); |
| } |
| dev->stats.rx_dropped++; |
| encx24j600_clr_bits(priv, EIR, RXABTIF); |
| } |
| |
| if (eir & PKTIF) { |
| u8 packet_count; |
| |
| mutex_lock(&priv->lock); |
| |
| packet_count = encx24j600_read_reg(priv, ESTAT) & 0xff; |
| while (packet_count) { |
| encx24j600_rx_packets(priv, packet_count); |
| packet_count = encx24j600_read_reg(priv, ESTAT) & 0xff; |
| } |
| |
| mutex_unlock(&priv->lock); |
| } |
| |
| /* Enable interrupts */ |
| encx24j600_cmd(priv, SETEIE); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int encx24j600_soft_reset(struct encx24j600_priv *priv) |
| { |
| int ret = 0; |
| int timeout; |
| u16 eudast; |
| |
| /* Write and verify a test value to EUDAST */ |
| regcache_cache_bypass(priv->ctx.regmap, true); |
| timeout = 10; |
| do { |
| encx24j600_write_reg(priv, EUDAST, EUDAST_TEST_VAL); |
| eudast = encx24j600_read_reg(priv, EUDAST); |
| usleep_range(25, 100); |
| } while ((eudast != EUDAST_TEST_VAL) && --timeout); |
| regcache_cache_bypass(priv->ctx.regmap, false); |
| |
| if (timeout == 0) { |
| ret = -ETIMEDOUT; |
| goto err_out; |
| } |
| |
| /* Wait for CLKRDY to become set */ |
| timeout = 10; |
| while (!(encx24j600_read_reg(priv, ESTAT) & CLKRDY) && --timeout) |
| usleep_range(25, 100); |
| |
| if (timeout == 0) { |
| ret = -ETIMEDOUT; |
| goto err_out; |
| } |
| |
| /* Issue a System Reset command */ |
| encx24j600_cmd(priv, SETETHRST); |
| usleep_range(25, 100); |
| |
| /* Confirm that EUDAST has 0000h after system reset */ |
| if (encx24j600_read_reg(priv, EUDAST) != 0) { |
| ret = -EINVAL; |
| goto err_out; |
| } |
| |
| /* Wait for PHY register and status bits to become available */ |
| usleep_range(256, 1000); |
| |
| err_out: |
| return ret; |
| } |
| |
| static int encx24j600_hw_reset(struct encx24j600_priv *priv) |
| { |
| int ret; |
| |
| mutex_lock(&priv->lock); |
| ret = encx24j600_soft_reset(priv); |
| mutex_unlock(&priv->lock); |
| |
| return ret; |
| } |
| |
| static void encx24j600_reset_hw_tx(struct encx24j600_priv *priv) |
| { |
| encx24j600_set_bits(priv, ECON2, TXRST); |
| encx24j600_clr_bits(priv, ECON2, TXRST); |
| } |
| |
| static void encx24j600_hw_init_tx(struct encx24j600_priv *priv) |
| { |
| /* Reset TX */ |
| encx24j600_reset_hw_tx(priv); |
| |
| /* Clear the TXIF flag if were previously set */ |
| encx24j600_clr_bits(priv, EIR, TXIF | TXABTIF); |
| |
| /* Write the Tx Buffer pointer */ |
| encx24j600_write_reg(priv, EGPWRPT, ENC_TX_BUF_START); |
| } |
| |
| static void encx24j600_hw_init_rx(struct encx24j600_priv *priv) |
| { |
| encx24j600_cmd(priv, DISABLERX); |
| |
| /* Set up RX packet start address in the SRAM */ |
| encx24j600_write_reg(priv, ERXST, ENC_RX_BUF_START); |
| |
| /* Preload the RX Data pointer to the beginning of the RX area */ |
| encx24j600_write_reg(priv, ERXRDPT, ENC_RX_BUF_START); |
| |
| priv->next_packet = ENC_RX_BUF_START; |
| |
| /* Set up RX end address in the SRAM */ |
| encx24j600_write_reg(priv, ERXTAIL, ENC_SRAM_SIZE - 2); |
| |
| /* Reset the user data pointers */ |
| encx24j600_write_reg(priv, EUDAST, ENC_SRAM_SIZE); |
| encx24j600_write_reg(priv, EUDAND, ENC_SRAM_SIZE + 1); |
| |
| /* Set Max Frame length */ |
| encx24j600_write_reg(priv, MAMXFL, MAX_FRAMELEN); |
| } |
| |
| static void encx24j600_dump_config(struct encx24j600_priv *priv, |
| const char *msg) |
| { |
| pr_info(DRV_NAME ": %s\n", msg); |
| |
| /* CHIP configuration */ |
| pr_info(DRV_NAME " ECON1: %04X\n", encx24j600_read_reg(priv, ECON1)); |
| pr_info(DRV_NAME " ECON2: %04X\n", encx24j600_read_reg(priv, ECON2)); |
| pr_info(DRV_NAME " ERXFCON: %04X\n", encx24j600_read_reg(priv, |
| ERXFCON)); |
| pr_info(DRV_NAME " ESTAT: %04X\n", encx24j600_read_reg(priv, ESTAT)); |
| pr_info(DRV_NAME " EIR: %04X\n", encx24j600_read_reg(priv, EIR)); |
| pr_info(DRV_NAME " EIDLED: %04X\n", encx24j600_read_reg(priv, EIDLED)); |
| |
| /* MAC layer configuration */ |
| pr_info(DRV_NAME " MACON1: %04X\n", encx24j600_read_reg(priv, MACON1)); |
| pr_info(DRV_NAME " MACON2: %04X\n", encx24j600_read_reg(priv, MACON2)); |
| pr_info(DRV_NAME " MAIPG: %04X\n", encx24j600_read_reg(priv, MAIPG)); |
| pr_info(DRV_NAME " MACLCON: %04X\n", encx24j600_read_reg(priv, |
| MACLCON)); |
| pr_info(DRV_NAME " MABBIPG: %04X\n", encx24j600_read_reg(priv, |
| MABBIPG)); |
| |
| /* PHY configuation */ |
| pr_info(DRV_NAME " PHCON1: %04X\n", encx24j600_read_phy(priv, PHCON1)); |
| pr_info(DRV_NAME " PHCON2: %04X\n", encx24j600_read_phy(priv, PHCON2)); |
| pr_info(DRV_NAME " PHANA: %04X\n", encx24j600_read_phy(priv, PHANA)); |
| pr_info(DRV_NAME " PHANLPA: %04X\n", encx24j600_read_phy(priv, |
| PHANLPA)); |
| pr_info(DRV_NAME " PHANE: %04X\n", encx24j600_read_phy(priv, PHANE)); |
| pr_info(DRV_NAME " PHSTAT1: %04X\n", encx24j600_read_phy(priv, |
| PHSTAT1)); |
| pr_info(DRV_NAME " PHSTAT2: %04X\n", encx24j600_read_phy(priv, |
| PHSTAT2)); |
| pr_info(DRV_NAME " PHSTAT3: %04X\n", encx24j600_read_phy(priv, |
| PHSTAT3)); |
| } |
| |
| static void encx24j600_set_rxfilter_mode(struct encx24j600_priv *priv) |
| { |
| switch (priv->rxfilter) { |
| case RXFILTER_PROMISC: |
| encx24j600_set_bits(priv, MACON1, PASSALL); |
| encx24j600_write_reg(priv, ERXFCON, UCEN | MCEN | NOTMEEN); |
| break; |
| case RXFILTER_MULTI: |
| encx24j600_clr_bits(priv, MACON1, PASSALL); |
| encx24j600_write_reg(priv, ERXFCON, UCEN | CRCEN | BCEN | MCEN); |
| break; |
| case RXFILTER_NORMAL: |
| default: |
| encx24j600_clr_bits(priv, MACON1, PASSALL); |
| encx24j600_write_reg(priv, ERXFCON, UCEN | CRCEN | BCEN); |
| break; |
| } |
| } |
| |
| static void encx24j600_hw_init(struct encx24j600_priv *priv) |
| { |
| u16 macon2; |
| |
| priv->hw_enabled = false; |
| |
| /* PHY Leds: link status, |
| * LEDA: Link State + collision events |
| * LEDB: Link State + transmit/receive events |
| */ |
| encx24j600_update_reg(priv, EIDLED, 0xff00, 0xcb00); |
| |
| /* Loopback disabled */ |
| encx24j600_write_reg(priv, MACON1, 0x9); |
| |
| /* interpacket gap value */ |
| encx24j600_write_reg(priv, MAIPG, 0x0c12); |
| |
| /* Write the auto negotiation pattern */ |
| encx24j600_write_phy(priv, PHANA, PHANA_DEFAULT); |
| |
| encx24j600_update_phcon1(priv); |
| encx24j600_check_link_status(priv); |
| |
| macon2 = MACON2_RSV1 | TXCRCEN | PADCFG0 | PADCFG2 | MACON2_DEFER; |
| if ((priv->autoneg == AUTONEG_DISABLE) && priv->full_duplex) |
| macon2 |= FULDPX; |
| |
| encx24j600_set_bits(priv, MACON2, macon2); |
| |
| priv->rxfilter = RXFILTER_NORMAL; |
| encx24j600_set_rxfilter_mode(priv); |
| |
| /* Program the Maximum frame length */ |
| encx24j600_write_reg(priv, MAMXFL, MAX_FRAMELEN); |
| |
| /* Init Tx pointers */ |
| encx24j600_hw_init_tx(priv); |
| |
| /* Init Rx pointers */ |
| encx24j600_hw_init_rx(priv); |
| |
| if (netif_msg_hw(priv)) |
| encx24j600_dump_config(priv, "Hw is initialized"); |
| } |
| |
| static void encx24j600_hw_enable(struct encx24j600_priv *priv) |
| { |
| /* Clear the interrupt flags in case was set */ |
| encx24j600_clr_bits(priv, EIR, (PCFULIF | RXABTIF | TXABTIF | TXIF | |
| PKTIF | LINKIF)); |
| |
| /* Enable the interrupts */ |
| encx24j600_write_reg(priv, EIE, (PCFULIE | RXABTIE | TXABTIE | TXIE | |
| PKTIE | LINKIE | INTIE)); |
| |
| /* Enable RX */ |
| encx24j600_cmd(priv, ENABLERX); |
| |
| priv->hw_enabled = true; |
| } |
| |
| static void encx24j600_hw_disable(struct encx24j600_priv *priv) |
| { |
| /* Disable all interrupts */ |
| encx24j600_write_reg(priv, EIE, 0); |
| |
| /* Disable RX */ |
| encx24j600_cmd(priv, DISABLERX); |
| |
| priv->hw_enabled = false; |
| } |
| |
| static int encx24j600_setlink(struct net_device *dev, u8 autoneg, u16 speed, |
| u8 duplex) |
| { |
| struct encx24j600_priv *priv = netdev_priv(dev); |
| int ret = 0; |
| |
| if (!priv->hw_enabled) { |
| /* link is in low power mode now; duplex setting |
| * will take effect on next encx24j600_hw_init() |
| */ |
| if (speed == SPEED_10 || speed == SPEED_100) { |
| priv->autoneg = (autoneg == AUTONEG_ENABLE); |
| priv->full_duplex = (duplex == DUPLEX_FULL); |
| priv->speed = (speed == SPEED_100); |
| } else { |
| netif_warn(priv, link, dev, "unsupported link speed setting\n"); |
| /*speeds other than SPEED_10 and SPEED_100 */ |
| /*are not supported by chip */ |
| ret = -EOPNOTSUPP; |
| } |
| } else { |
| netif_warn(priv, link, dev, "Warning: hw must be disabled to set link mode\n"); |
| ret = -EBUSY; |
| } |
| return ret; |
| } |
| |
| static void encx24j600_hw_get_macaddr(struct encx24j600_priv *priv, |
| unsigned char *ethaddr) |
| { |
| unsigned short val; |
| |
| val = encx24j600_read_reg(priv, MAADR1); |
| |
| ethaddr[0] = val & 0x00ff; |
| ethaddr[1] = (val & 0xff00) >> 8; |
| |
| val = encx24j600_read_reg(priv, MAADR2); |
| |
| ethaddr[2] = val & 0x00ffU; |
| ethaddr[3] = (val & 0xff00U) >> 8; |
| |
| val = encx24j600_read_reg(priv, MAADR3); |
| |
| ethaddr[4] = val & 0x00ffU; |
| ethaddr[5] = (val & 0xff00U) >> 8; |
| } |
| |
| /* Program the hardware MAC address from dev->dev_addr.*/ |
| static int encx24j600_set_hw_macaddr(struct net_device *dev) |
| { |
| struct encx24j600_priv *priv = netdev_priv(dev); |
| |
| if (priv->hw_enabled) { |
| netif_info(priv, drv, dev, "Hardware must be disabled to set Mac address\n"); |
| return -EBUSY; |
| } |
| |
| mutex_lock(&priv->lock); |
| |
| netif_info(priv, drv, dev, "%s: Setting MAC address to %pM\n", |
| dev->name, dev->dev_addr); |
| |
| encx24j600_write_reg(priv, MAADR3, (dev->dev_addr[4] | |
| dev->dev_addr[5] << 8)); |
| encx24j600_write_reg(priv, MAADR2, (dev->dev_addr[2] | |
| dev->dev_addr[3] << 8)); |
| encx24j600_write_reg(priv, MAADR1, (dev->dev_addr[0] | |
| dev->dev_addr[1] << 8)); |
| |
| mutex_unlock(&priv->lock); |
| |
| return 0; |
| } |
| |
| /* Store the new hardware address in dev->dev_addr, and update the MAC.*/ |
| static int encx24j600_set_mac_address(struct net_device *dev, void *addr) |
| { |
| struct sockaddr *address = addr; |
| |
| if (netif_running(dev)) |
| return -EBUSY; |
| if (!is_valid_ether_addr(address->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| eth_hw_addr_set(dev, address->sa_data); |
| return encx24j600_set_hw_macaddr(dev); |
| } |
| |
| static int encx24j600_open(struct net_device *dev) |
| { |
| struct encx24j600_priv *priv = netdev_priv(dev); |
| |
| int ret = request_threaded_irq(priv->ctx.spi->irq, NULL, encx24j600_isr, |
| IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| DRV_NAME, priv); |
| if (unlikely(ret < 0)) { |
| netdev_err(dev, "request irq %d failed (ret = %d)\n", |
| priv->ctx.spi->irq, ret); |
| return ret; |
| } |
| |
| encx24j600_hw_disable(priv); |
| encx24j600_hw_init(priv); |
| encx24j600_hw_enable(priv); |
| netif_start_queue(dev); |
| |
| return 0; |
| } |
| |
| static int encx24j600_stop(struct net_device *dev) |
| { |
| struct encx24j600_priv *priv = netdev_priv(dev); |
| |
| netif_stop_queue(dev); |
| free_irq(priv->ctx.spi->irq, priv); |
| return 0; |
| } |
| |
| static void encx24j600_setrx_proc(struct kthread_work *ws) |
| { |
| struct encx24j600_priv *priv = |
| container_of(ws, struct encx24j600_priv, setrx_work); |
| |
| mutex_lock(&priv->lock); |
| encx24j600_set_rxfilter_mode(priv); |
| mutex_unlock(&priv->lock); |
| } |
| |
| static void encx24j600_set_multicast_list(struct net_device *dev) |
| { |
| struct encx24j600_priv *priv = netdev_priv(dev); |
| int oldfilter = priv->rxfilter; |
| |
| if (dev->flags & IFF_PROMISC) { |
| netif_dbg(priv, link, dev, "promiscuous mode\n"); |
| priv->rxfilter = RXFILTER_PROMISC; |
| } else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) { |
| netif_dbg(priv, link, dev, "%smulticast mode\n", |
| (dev->flags & IFF_ALLMULTI) ? "all-" : ""); |
| priv->rxfilter = RXFILTER_MULTI; |
| } else { |
| netif_dbg(priv, link, dev, "normal mode\n"); |
| priv->rxfilter = RXFILTER_NORMAL; |
| } |
| |
| if (oldfilter != priv->rxfilter) |
| kthread_queue_work(&priv->kworker, &priv->setrx_work); |
| } |
| |
| static void encx24j600_hw_tx(struct encx24j600_priv *priv) |
| { |
| struct net_device *dev = priv->ndev; |
| |
| netif_info(priv, tx_queued, dev, "TX Packet Len:%d\n", |
| priv->tx_skb->len); |
| |
| if (netif_msg_pktdata(priv)) |
| dump_packet("TX", priv->tx_skb->len, priv->tx_skb->data); |
| |
| if (encx24j600_read_reg(priv, EIR) & TXABTIF) |
| /* Last transmition aborted due to error. Reset TX interface */ |
| encx24j600_reset_hw_tx(priv); |
| |
| /* Clear the TXIF flag if were previously set */ |
| encx24j600_clr_bits(priv, EIR, TXIF); |
| |
| /* Set the data pointer to the TX buffer address in the SRAM */ |
| encx24j600_write_reg(priv, EGPWRPT, ENC_TX_BUF_START); |
| |
| /* Copy the packet into the SRAM */ |
| encx24j600_raw_write(priv, WGPDATA, (u8 *)priv->tx_skb->data, |
| priv->tx_skb->len); |
| |
| /* Program the Tx buffer start pointer */ |
| encx24j600_write_reg(priv, ETXST, ENC_TX_BUF_START); |
| |
| /* Program the packet length */ |
| encx24j600_write_reg(priv, ETXLEN, priv->tx_skb->len); |
| |
| /* Start the transmission */ |
| encx24j600_cmd(priv, SETTXRTS); |
| } |
| |
| static void encx24j600_tx_proc(struct kthread_work *ws) |
| { |
| struct encx24j600_priv *priv = |
| container_of(ws, struct encx24j600_priv, tx_work); |
| |
| mutex_lock(&priv->lock); |
| encx24j600_hw_tx(priv); |
| mutex_unlock(&priv->lock); |
| } |
| |
| static netdev_tx_t encx24j600_tx(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct encx24j600_priv *priv = netdev_priv(dev); |
| |
| netif_stop_queue(dev); |
| |
| /* save the timestamp */ |
| netif_trans_update(dev); |
| |
| /* Remember the skb for deferred processing */ |
| priv->tx_skb = skb; |
| |
| kthread_queue_work(&priv->kworker, &priv->tx_work); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| /* Deal with a transmit timeout */ |
| static void encx24j600_tx_timeout(struct net_device *dev, unsigned int txqueue) |
| { |
| struct encx24j600_priv *priv = netdev_priv(dev); |
| |
| netif_err(priv, tx_err, dev, "TX timeout at %ld, latency %ld\n", |
| jiffies, jiffies - dev_trans_start(dev)); |
| |
| dev->stats.tx_errors++; |
| netif_wake_queue(dev); |
| } |
| |
| static int encx24j600_get_regs_len(struct net_device *dev) |
| { |
| return SFR_REG_COUNT; |
| } |
| |
| static void encx24j600_get_regs(struct net_device *dev, |
| struct ethtool_regs *regs, void *p) |
| { |
| struct encx24j600_priv *priv = netdev_priv(dev); |
| u16 *buff = p; |
| u8 reg; |
| |
| regs->version = 1; |
| mutex_lock(&priv->lock); |
| for (reg = 0; reg < SFR_REG_COUNT; reg += 2) { |
| unsigned int val = 0; |
| /* ignore errors for unreadable registers */ |
| regmap_read(priv->ctx.regmap, reg, &val); |
| buff[reg] = val & 0xffff; |
| } |
| mutex_unlock(&priv->lock); |
| } |
| |
| static void encx24j600_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); |
| strlcpy(info->version, DRV_VERSION, sizeof(info->version)); |
| strlcpy(info->bus_info, dev_name(dev->dev.parent), |
| sizeof(info->bus_info)); |
| } |
| |
| static int encx24j600_get_link_ksettings(struct net_device *dev, |
| struct ethtool_link_ksettings *cmd) |
| { |
| struct encx24j600_priv *priv = netdev_priv(dev); |
| u32 supported; |
| |
| supported = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | |
| SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | |
| SUPPORTED_Autoneg | SUPPORTED_TP; |
| |
| ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, |
| supported); |
| |
| cmd->base.speed = priv->speed; |
| cmd->base.duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF; |
| cmd->base.port = PORT_TP; |
| cmd->base.autoneg = priv->autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE; |
| |
| return 0; |
| } |
| |
| static int |
| encx24j600_set_link_ksettings(struct net_device *dev, |
| const struct ethtool_link_ksettings *cmd) |
| { |
| return encx24j600_setlink(dev, cmd->base.autoneg, |
| cmd->base.speed, cmd->base.duplex); |
| } |
| |
| static u32 encx24j600_get_msglevel(struct net_device *dev) |
| { |
| struct encx24j600_priv *priv = netdev_priv(dev); |
| |
| return priv->msg_enable; |
| } |
| |
| static void encx24j600_set_msglevel(struct net_device *dev, u32 val) |
| { |
| struct encx24j600_priv *priv = netdev_priv(dev); |
| |
| priv->msg_enable = val; |
| } |
| |
| static const struct ethtool_ops encx24j600_ethtool_ops = { |
| .get_drvinfo = encx24j600_get_drvinfo, |
| .get_msglevel = encx24j600_get_msglevel, |
| .set_msglevel = encx24j600_set_msglevel, |
| .get_regs_len = encx24j600_get_regs_len, |
| .get_regs = encx24j600_get_regs, |
| .get_link_ksettings = encx24j600_get_link_ksettings, |
| .set_link_ksettings = encx24j600_set_link_ksettings, |
| }; |
| |
| static const struct net_device_ops encx24j600_netdev_ops = { |
| .ndo_open = encx24j600_open, |
| .ndo_stop = encx24j600_stop, |
| .ndo_start_xmit = encx24j600_tx, |
| .ndo_set_rx_mode = encx24j600_set_multicast_list, |
| .ndo_set_mac_address = encx24j600_set_mac_address, |
| .ndo_tx_timeout = encx24j600_tx_timeout, |
| .ndo_validate_addr = eth_validate_addr, |
| }; |
| |
| static int encx24j600_spi_probe(struct spi_device *spi) |
| { |
| int ret; |
| |
| struct net_device *ndev; |
| struct encx24j600_priv *priv; |
| u16 eidled; |
| u8 addr[ETH_ALEN]; |
| |
| ndev = alloc_etherdev(sizeof(struct encx24j600_priv)); |
| |
| if (!ndev) { |
| ret = -ENOMEM; |
| goto error_out; |
| } |
| |
| priv = netdev_priv(ndev); |
| spi_set_drvdata(spi, priv); |
| dev_set_drvdata(&spi->dev, priv); |
| SET_NETDEV_DEV(ndev, &spi->dev); |
| |
| priv->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); |
| priv->ndev = ndev; |
| |
| /* Default configuration PHY configuration */ |
| priv->full_duplex = true; |
| priv->autoneg = AUTONEG_ENABLE; |
| priv->speed = SPEED_100; |
| |
| priv->ctx.spi = spi; |
| ndev->irq = spi->irq; |
| ndev->netdev_ops = &encx24j600_netdev_ops; |
| |
| ret = devm_regmap_init_encx24j600(&spi->dev, &priv->ctx); |
| if (ret) |
| goto out_free; |
| |
| mutex_init(&priv->lock); |
| |
| /* Reset device and check if it is connected */ |
| if (encx24j600_hw_reset(priv)) { |
| netif_err(priv, probe, ndev, |
| DRV_NAME ": Chip is not detected\n"); |
| ret = -EIO; |
| goto out_free; |
| } |
| |
| /* Initialize the device HW to the consistent state */ |
| encx24j600_hw_init(priv); |
| |
| kthread_init_worker(&priv->kworker); |
| kthread_init_work(&priv->tx_work, encx24j600_tx_proc); |
| kthread_init_work(&priv->setrx_work, encx24j600_setrx_proc); |
| |
| priv->kworker_task = kthread_run(kthread_worker_fn, &priv->kworker, |
| "encx24j600"); |
| |
| if (IS_ERR(priv->kworker_task)) { |
| ret = PTR_ERR(priv->kworker_task); |
| goto out_free; |
| } |
| |
| /* Get the MAC address from the chip */ |
| encx24j600_hw_get_macaddr(priv, addr); |
| eth_hw_addr_set(ndev, addr); |
| |
| ndev->ethtool_ops = &encx24j600_ethtool_ops; |
| |
| ret = register_netdev(ndev); |
| if (unlikely(ret)) { |
| netif_err(priv, probe, ndev, "Error %d initializing card encx24j600 card\n", |
| ret); |
| goto out_stop; |
| } |
| |
| eidled = encx24j600_read_reg(priv, EIDLED); |
| if (((eidled & DEVID_MASK) >> DEVID_SHIFT) != ENCX24J600_DEV_ID) { |
| ret = -EINVAL; |
| goto out_unregister; |
| } |
| |
| netif_info(priv, probe, ndev, "Silicon rev ID: 0x%02x\n", |
| (eidled & REVID_MASK) >> REVID_SHIFT); |
| |
| netif_info(priv, drv, priv->ndev, "MAC address %pM\n", ndev->dev_addr); |
| |
| return ret; |
| |
| out_unregister: |
| unregister_netdev(priv->ndev); |
| out_stop: |
| kthread_stop(priv->kworker_task); |
| out_free: |
| free_netdev(ndev); |
| |
| error_out: |
| return ret; |
| } |
| |
| static void encx24j600_spi_remove(struct spi_device *spi) |
| { |
| struct encx24j600_priv *priv = dev_get_drvdata(&spi->dev); |
| |
| unregister_netdev(priv->ndev); |
| kthread_stop(priv->kworker_task); |
| |
| free_netdev(priv->ndev); |
| } |
| |
| static const struct spi_device_id encx24j600_spi_id_table[] = { |
| { .name = "encx24j600" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(spi, encx24j600_spi_id_table); |
| |
| static struct spi_driver encx24j600_spi_net_driver = { |
| .driver = { |
| .name = DRV_NAME, |
| .owner = THIS_MODULE, |
| .bus = &spi_bus_type, |
| }, |
| .probe = encx24j600_spi_probe, |
| .remove = encx24j600_spi_remove, |
| .id_table = encx24j600_spi_id_table, |
| }; |
| |
| module_spi_driver(encx24j600_spi_net_driver); |
| |
| MODULE_DESCRIPTION(DRV_NAME " ethernet driver"); |
| MODULE_AUTHOR("Jon Ringle <jringle@gridpoint.com>"); |
| MODULE_LICENSE("GPL"); |