drivers/phy/st/phy-stm32-usbphyc.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 /*
  * STMicroelectronics STM32 USB PHY Controller driver
  *
  * Copyright (C) 2018 STMicroelectronics
  * Author(s): Amelie Delaunay <amelie.delaunay@st.com>.
  */
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/reset.h>

 #define STM32_USBPHYC_PLL	0x0
 #define STM32_USBPHYC_MISC	0x8
 #define STM32_USBPHYC_VERSION	0x3F4

 /* STM32_USBPHYC_PLL bit fields */
 #define PLLNDIV			GENMASK(6, 0)
 #define PLLFRACIN		GENMASK(25, 10)
 #define PLLEN			BIT(26)
 #define PLLSTRB			BIT(27)
 #define PLLSTRBYP		BIT(28)
 #define PLLFRACCTL		BIT(29)
 #define PLLDITHEN0		BIT(30)
 #define PLLDITHEN1		BIT(31)

 /* STM32_USBPHYC_MISC bit fields */
 #define SWITHOST		BIT(0)

 /* STM32_USBPHYC_VERSION bit fields */
 #define MINREV			GENMASK(3, 0)
 #define MAJREV			GENMASK(7, 4)

 static const char * const supplies_names[] = {
 	"vdda1v1",	/* 1V1 */
 	"vdda1v8",	/* 1V8 */
 };

 #define NUM_SUPPLIES		ARRAY_SIZE(supplies_names)

 #define PLL_LOCK_TIME_US	100
 #define PLL_PWR_DOWN_TIME_US	5
 #define PLL_FVCO_MHZ		2880
 #define PLL_INFF_MIN_RATE_HZ	19200000
 #define PLL_INFF_MAX_RATE_HZ	38400000
 #define HZ_PER_MHZ		1000000L

 struct pll_params {
 	u8 ndiv;
 	u16 frac;
 };

 struct stm32_usbphyc_phy {
 	struct phy *phy;
 	struct stm32_usbphyc *usbphyc;
 	struct regulator_bulk_data supplies[NUM_SUPPLIES];
 	u32 index;
 	bool active;
 };

 struct stm32_usbphyc {
 	struct device *dev;
 	void __iomem *base;
 	struct clk *clk;
 	struct reset_control *rst;
 	struct stm32_usbphyc_phy **phys;
 	int nphys;
 	int switch_setup;
 };

 static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits)
 {
 	writel_relaxed(readl_relaxed(reg) | bits, reg);
 }

 static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits)
 {
 	writel_relaxed(readl_relaxed(reg) & ~bits, reg);
 }

 static void stm32_usbphyc_get_pll_params(u32 clk_rate,
 					 struct pll_params *pll_params)
 {
 	unsigned long long fvco, ndiv, frac;

 	/*    _
 	 *   | FVCO = INFF*2*(NDIV + FRACT/2^16) when DITHER_DISABLE[1] = 1
 	 *   | FVCO = 2880MHz
 	 *  <
 	 *   | NDIV = integer part of input bits to set the LDF
 	 *   |_FRACT = fractional part of input bits to set the LDF
 	 *  =>	PLLNDIV = integer part of (FVCO / (INFF*2))
 	 *  =>	PLLFRACIN = fractional part of(FVCO / INFF*2) * 2^16
 	 * <=>  PLLFRACIN = ((FVCO / (INFF*2)) - PLLNDIV) * 2^16
 	 */
 	fvco = (unsigned long long)PLL_FVCO_MHZ * HZ_PER_MHZ;

 	ndiv = fvco;
 	do_div(ndiv, (clk_rate * 2));
 	pll_params->ndiv = (u8)ndiv;

 	frac = fvco * (1 << 16);
 	do_div(frac, (clk_rate * 2));
 	frac = frac - (ndiv * (1 << 16));
 	pll_params->frac = (u16)frac;
 }

 static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)
 {
 	struct pll_params pll_params;
 	u32 clk_rate = clk_get_rate(usbphyc->clk);
 	u32 ndiv, frac;
 	u32 usbphyc_pll;

 	if ((clk_rate < PLL_INFF_MIN_RATE_HZ) ||
 	    (clk_rate > PLL_INFF_MAX_RATE_HZ)) {
 		dev_err(usbphyc->dev, "input clk freq (%dHz) out of range\n",
 			clk_rate);
 		return -EINVAL;
 	}

 	stm32_usbphyc_get_pll_params(clk_rate, &pll_params);
 	ndiv = FIELD_PREP(PLLNDIV, pll_params.ndiv);
 	frac = FIELD_PREP(PLLFRACIN, pll_params.frac);

 	usbphyc_pll = PLLDITHEN1 | PLLDITHEN0 | PLLSTRBYP | ndiv;

 	if (pll_params.frac)
 		usbphyc_pll |= PLLFRACCTL | frac;

 	writel_relaxed(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL);

 	dev_dbg(usbphyc->dev, "input clk freq=%dHz, ndiv=%lu, frac=%lu\n",
 		clk_rate, FIELD_GET(PLLNDIV, usbphyc_pll),
 		FIELD_GET(PLLFRACIN, usbphyc_pll));

 	return 0;
 }

 static bool stm32_usbphyc_has_one_phy_active(struct stm32_usbphyc *usbphyc)
 {
 	int i;

 	for (i = 0; i < usbphyc->nphys; i++)
 		if (usbphyc->phys[i]->active)
 			return true;

 	return false;
 }

 static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc)
 {
 	void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL;
 	bool pllen = (readl_relaxed(pll_reg) & PLLEN);
 	int ret;

 	/* Check if one phy port has already configured the pll */
 	if (pllen && stm32_usbphyc_has_one_phy_active(usbphyc))
 		return 0;

 	if (pllen) {
 		stm32_usbphyc_clr_bits(pll_reg, PLLEN);
 		/* Wait for minimum width of powerdown pulse (ENABLE = Low) */
 		udelay(PLL_PWR_DOWN_TIME_US);
 	}

 	ret = stm32_usbphyc_pll_init(usbphyc);
 	if (ret)
 		return ret;

 	stm32_usbphyc_set_bits(pll_reg, PLLEN);

 	/* Wait for maximum lock time */
 	udelay(PLL_LOCK_TIME_US);

 	if (!(readl_relaxed(pll_reg) & PLLEN)) {
 		dev_err(usbphyc->dev, "PLLEN not set\n");
 		return -EIO;
 	}

 	return 0;
 }

 static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc)
 {
 	void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL;

 	/* Check if other phy port active */
 	if (stm32_usbphyc_has_one_phy_active(usbphyc))
 		return 0;

 	stm32_usbphyc_clr_bits(pll_reg, PLLEN);
 	/* Wait for minimum width of powerdown pulse (ENABLE = Low) */
 	udelay(PLL_PWR_DOWN_TIME_US);

 	if (readl_relaxed(pll_reg) & PLLEN) {
 		dev_err(usbphyc->dev, "PLL not reset\n");
 		return -EIO;
 	}

 	return 0;
 }

 static int stm32_usbphyc_phy_init(struct phy *phy)
 {
 	struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
 	struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc;
 	int ret;

 	ret = stm32_usbphyc_pll_enable(usbphyc);
 	if (ret)
 		return ret;

 	usbphyc_phy->active = true;

 	return 0;
 }

 static int stm32_usbphyc_phy_exit(struct phy *phy)
 {
 	struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
 	struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc;

 	usbphyc_phy->active = false;

 	return stm32_usbphyc_pll_disable(usbphyc);
 }

 static int stm32_usbphyc_phy_power_on(struct phy *phy)
 {
 	struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);

 	return regulator_bulk_enable(NUM_SUPPLIES, usbphyc_phy->supplies);
 }

 static int stm32_usbphyc_phy_power_off(struct phy *phy)
 {
 	struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);

 	return regulator_bulk_disable(NUM_SUPPLIES, usbphyc_phy->supplies);
 }

 static const struct phy_ops stm32_usbphyc_phy_ops = {
 	.init = stm32_usbphyc_phy_init,
 	.exit = stm32_usbphyc_phy_exit,
 	.power_on = stm32_usbphyc_phy_power_on,
 	.power_off = stm32_usbphyc_phy_power_off,
 	.owner = THIS_MODULE,
 };

 static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc,
 				       u32 utmi_switch)
 {
 	if (!utmi_switch)
 		stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_MISC,
 				       SWITHOST);
 	else
 		stm32_usbphyc_set_bits(usbphyc->base + STM32_USBPHYC_MISC,
 				       SWITHOST);
 	usbphyc->switch_setup = utmi_switch;
 }

 static struct phy *stm32_usbphyc_of_xlate(struct device *dev,
 					  struct of_phandle_args *args)
 {
 	struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev);
 	struct stm32_usbphyc_phy *usbphyc_phy = NULL;
 	struct device_node *phynode = args->np;
 	int port = 0;

 	for (port = 0; port < usbphyc->nphys; port++) {
 		if (phynode == usbphyc->phys[port]->phy->dev.of_node) {
 			usbphyc_phy = usbphyc->phys[port];
 			break;
 		}
 	}
 	if (!usbphyc_phy) {
 		dev_err(dev, "failed to find phy\n");
 		return ERR_PTR(-EINVAL);
 	}

 	if (((usbphyc_phy->index == 0) && (args->args_count != 0)) ||
 	    ((usbphyc_phy->index == 1) && (args->args_count != 1))) {
 		dev_err(dev, "invalid number of cells for phy port%d\n",
 			usbphyc_phy->index);
 		return ERR_PTR(-EINVAL);
 	}

 	/* Configure the UTMI switch for PHY port#2 */
 	if (usbphyc_phy->index == 1) {
 		if (usbphyc->switch_setup < 0) {
 			stm32_usbphyc_switch_setup(usbphyc, args->args[0]);
 		} else {
 			if (args->args[0] != usbphyc->switch_setup) {
 				dev_err(dev, "phy port1 already used\n");
 				return ERR_PTR(-EBUSY);
 			}
 		}
 	}

 	return usbphyc_phy->phy;
 }

 static int stm32_usbphyc_probe(struct platform_device *pdev)
 {
 	struct stm32_usbphyc *usbphyc;
 	struct device *dev = &pdev->dev;
 	struct device_node *child, *np = dev->of_node;
 	struct resource *res;
 	struct phy_provider *phy_provider;
 	u32 version;
 	int ret, port = 0;

 	usbphyc = devm_kzalloc(dev, sizeof(*usbphyc), GFP_KERNEL);
 	if (!usbphyc)
 		return -ENOMEM;
 	usbphyc->dev = dev;
 	dev_set_drvdata(dev, usbphyc);

 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	usbphyc->base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(usbphyc->base))
 		return PTR_ERR(usbphyc->base);

 	usbphyc->clk = devm_clk_get(dev, 0);
 	if (IS_ERR(usbphyc->clk)) {
 		ret = PTR_ERR(usbphyc->clk);
 		dev_err(dev, "clk get failed: %d\n", ret);
 		return ret;
 	}

 	ret = clk_prepare_enable(usbphyc->clk);
 	if (ret) {
 		dev_err(dev, "clk enable failed: %d\n", ret);
 		return ret;
 	}

 	usbphyc->rst = devm_reset_control_get(dev, 0);
 	if (!IS_ERR(usbphyc->rst)) {
 		reset_control_assert(usbphyc->rst);
 		udelay(2);
 		reset_control_deassert(usbphyc->rst);
 	}

 	usbphyc->switch_setup = -EINVAL;
 	usbphyc->nphys = of_get_child_count(np);
 	usbphyc->phys = devm_kcalloc(dev, usbphyc->nphys,
 				     sizeof(*usbphyc->phys), GFP_KERNEL);
 	if (!usbphyc->phys) {
 		ret = -ENOMEM;
 		goto clk_disable;
 	}

 	for_each_child_of_node(np, child) {
 		struct stm32_usbphyc_phy *usbphyc_phy;
 		struct phy *phy;
 		u32 index;
 		int i;

 		phy = devm_phy_create(dev, child, &stm32_usbphyc_phy_ops);
 		if (IS_ERR(phy)) {
 			ret = PTR_ERR(phy);
 			if (ret != -EPROBE_DEFER)
 				dev_err(dev, "failed to create phy%d: %d\n",
 					port, ret);
 			goto put_child;
 		}

 		usbphyc_phy = devm_kzalloc(dev, sizeof(*usbphyc_phy),
 					   GFP_KERNEL);
 		if (!usbphyc_phy) {
 			ret = -ENOMEM;
 			goto put_child;
 		}

 		for (i = 0; i < NUM_SUPPLIES; i++)
 			usbphyc_phy->supplies[i].supply = supplies_names[i];

 		ret = devm_regulator_bulk_get(&phy->dev, NUM_SUPPLIES,
 					      usbphyc_phy->supplies);
 		if (ret) {
 			if (ret != -EPROBE_DEFER)
 				dev_err(&phy->dev,
 					"failed to get regulators: %d\n", ret);
 			goto put_child;
 		}

 		ret = of_property_read_u32(child, "reg", &index);
 		if (ret || index > usbphyc->nphys) {
 			dev_err(&phy->dev, "invalid reg property: %d\n", ret);
 			goto put_child;
 		}

 		usbphyc->phys[port] = usbphyc_phy;
 		phy_set_bus_width(phy, 8);
 		phy_set_drvdata(phy, usbphyc_phy);

 		usbphyc->phys[port]->phy = phy;
 		usbphyc->phys[port]->usbphyc = usbphyc;
 		usbphyc->phys[port]->index = index;
 		usbphyc->phys[port]->active = false;

 		port++;
 	}

 	phy_provider = devm_of_phy_provider_register(dev,
 						     stm32_usbphyc_of_xlate);
 	if (IS_ERR(phy_provider)) {
 		ret = PTR_ERR(phy_provider);
 		dev_err(dev, "failed to register phy provider: %d\n", ret);
 		goto clk_disable;
 	}

 	version = readl_relaxed(usbphyc->base + STM32_USBPHYC_VERSION);
 	dev_info(dev, "registered rev:%lu.%lu\n",
 		 FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version));

 	return 0;

 put_child:
 	of_node_put(child);
 clk_disable:
 	clk_disable_unprepare(usbphyc->clk);

 	return ret;
 }

 static int stm32_usbphyc_remove(struct platform_device *pdev)
 {
 	struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev);

 	clk_disable_unprepare(usbphyc->clk);

 	return 0;
 }

 static const struct of_device_id stm32_usbphyc_of_match[] = {
 	{ .compatible = "st,stm32mp1-usbphyc", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, stm32_usbphyc_of_match);

 static struct platform_driver stm32_usbphyc_driver = {
 	.probe = stm32_usbphyc_probe,
 	.remove = stm32_usbphyc_remove,
 	.driver = {
 		.of_match_table = stm32_usbphyc_of_match,
 		.name = "stm32-usbphyc",
 	}
 };
 module_platform_driver(stm32_usbphyc_driver);

 MODULE_DESCRIPTION("STMicroelectronics STM32 USBPHYC driver");
 MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
 MODULE_LICENSE("GPL v2");
	// SPDX-License-Identifier: GPL-2.0
	/*
	* STMicroelectronics STM32 USB PHY Controller driver
	*
	* Copyright (C) 2018 STMicroelectronics
	* Author(s): Amelie Delaunay <amelie.delaunay@st.com>.
	*/
	#include <linux/bitfield.h>
	#include <linux/clk.h>
	#include <linux/delay.h>
	#include <linux/io.h>
	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/of_platform.h>
	#include <linux/phy/phy.h>
	#include <linux/reset.h>

	#define STM32_USBPHYC_PLL 0x0
	#define STM32_USBPHYC_MISC 0x8
	#define STM32_USBPHYC_VERSION 0x3F4

	/* STM32_USBPHYC_PLL bit fields */
	#define PLLNDIV GENMASK(6, 0)
	#define PLLFRACIN GENMASK(25, 10)
	#define PLLEN BIT(26)
	#define PLLSTRB BIT(27)
	#define PLLSTRBYP BIT(28)
	#define PLLFRACCTL BIT(29)
	#define PLLDITHEN0 BIT(30)
	#define PLLDITHEN1 BIT(31)

	/* STM32_USBPHYC_MISC bit fields */
	#define SWITHOST BIT(0)

	/* STM32_USBPHYC_VERSION bit fields */
	#define MINREV GENMASK(3, 0)
	#define MAJREV GENMASK(7, 4)

	static const char * const supplies_names[] = {
	"vdda1v1", /* 1V1 */
	"vdda1v8", /* 1V8 */
	};

	#define NUM_SUPPLIES ARRAY_SIZE(supplies_names)

	#define PLL_LOCK_TIME_US 100
	#define PLL_PWR_DOWN_TIME_US 5
	#define PLL_FVCO_MHZ 2880
	#define PLL_INFF_MIN_RATE_HZ 19200000
	#define PLL_INFF_MAX_RATE_HZ 38400000
	#define HZ_PER_MHZ 1000000L

	struct pll_params {
	u8 ndiv;
	u16 frac;
	};

	struct stm32_usbphyc_phy {
	struct phy *phy;
	struct stm32_usbphyc *usbphyc;
	struct regulator_bulk_data supplies[NUM_SUPPLIES];
	u32 index;
	bool active;
	};

	struct stm32_usbphyc {
	struct device *dev;
	void __iomem *base;
	struct clk *clk;
	struct reset_control *rst;
	struct stm32_usbphyc_phy **phys;
	int nphys;
	int switch_setup;
	};

	static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits)
	{
	writel_relaxed(readl_relaxed(reg) \| bits, reg);
	}

	static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits)
	{
	writel_relaxed(readl_relaxed(reg) & ~bits, reg);
	}

	static void stm32_usbphyc_get_pll_params(u32 clk_rate,
	struct pll_params *pll_params)
	{
	unsigned long long fvco, ndiv, frac;

	/* _
	* \| FVCO = INFF2(NDIV + FRACT/2^16) when DITHER_DISABLE[1] = 1
	* \| FVCO = 2880MHz
	* <
	* \| NDIV = integer part of input bits to set the LDF
	* \|_FRACT = fractional part of input bits to set the LDF
	* => PLLNDIV = integer part of (FVCO / (INFF*2))
	* => PLLFRACIN = fractional part of(FVCO / INFF2) 2^16
	* <=> PLLFRACIN = ((FVCO / (INFF2)) - PLLNDIV) 2^16
	*/
	fvco = (unsigned long long)PLL_FVCO_MHZ * HZ_PER_MHZ;

	ndiv = fvco;
	do_div(ndiv, (clk_rate * 2));
	pll_params->ndiv = (u8)ndiv;

	frac = fvco * (1 << 16);
	do_div(frac, (clk_rate * 2));
	frac = frac - (ndiv * (1 << 16));
	pll_params->frac = (u16)frac;
	}

	static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)
	{
	struct pll_params pll_params;
	u32 clk_rate = clk_get_rate(usbphyc->clk);
	u32 ndiv, frac;
	u32 usbphyc_pll;

	if ((clk_rate < PLL_INFF_MIN_RATE_HZ) \|\|
	(clk_rate > PLL_INFF_MAX_RATE_HZ)) {
	dev_err(usbphyc->dev, "input clk freq (%dHz) out of range\n",
	clk_rate);
	return -EINVAL;
	}

	stm32_usbphyc_get_pll_params(clk_rate, &pll_params);
	ndiv = FIELD_PREP(PLLNDIV, pll_params.ndiv);
	frac = FIELD_PREP(PLLFRACIN, pll_params.frac);

	usbphyc_pll = PLLDITHEN1 \| PLLDITHEN0 \| PLLSTRBYP \| ndiv;

	if (pll_params.frac)
	usbphyc_pll \|= PLLFRACCTL \| frac;

	writel_relaxed(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL);

	dev_dbg(usbphyc->dev, "input clk freq=%dHz, ndiv=%lu, frac=%lu\n",
	clk_rate, FIELD_GET(PLLNDIV, usbphyc_pll),
	FIELD_GET(PLLFRACIN, usbphyc_pll));

	return 0;
	}

	static bool stm32_usbphyc_has_one_phy_active(struct stm32_usbphyc *usbphyc)
	{
	int i;

	for (i = 0; i < usbphyc->nphys; i++)
	if (usbphyc->phys[i]->active)
	return true;

	return false;
	}

	static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc)
	{
	void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL;
	bool pllen = (readl_relaxed(pll_reg) & PLLEN);
	int ret;

	/* Check if one phy port has already configured the pll */
	if (pllen && stm32_usbphyc_has_one_phy_active(usbphyc))
	return 0;

	if (pllen) {
	stm32_usbphyc_clr_bits(pll_reg, PLLEN);
	/* Wait for minimum width of powerdown pulse (ENABLE = Low) */
	udelay(PLL_PWR_DOWN_TIME_US);
	}

	ret = stm32_usbphyc_pll_init(usbphyc);
	if (ret)
	return ret;

	stm32_usbphyc_set_bits(pll_reg, PLLEN);

	/* Wait for maximum lock time */
	udelay(PLL_LOCK_TIME_US);

	if (!(readl_relaxed(pll_reg) & PLLEN)) {
	dev_err(usbphyc->dev, "PLLEN not set\n");
	return -EIO;
	}

	return 0;
	}

	static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc)
	{
	void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL;

	/* Check if other phy port active */
	if (stm32_usbphyc_has_one_phy_active(usbphyc))
	return 0;

	stm32_usbphyc_clr_bits(pll_reg, PLLEN);
	/* Wait for minimum width of powerdown pulse (ENABLE = Low) */
	udelay(PLL_PWR_DOWN_TIME_US);

	if (readl_relaxed(pll_reg) & PLLEN) {
	dev_err(usbphyc->dev, "PLL not reset\n");
	return -EIO;
	}

	return 0;
	}

	static int stm32_usbphyc_phy_init(struct phy *phy)
	{
	struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
	struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc;
	int ret;

	ret = stm32_usbphyc_pll_enable(usbphyc);
	if (ret)
	return ret;

	usbphyc_phy->active = true;

	return 0;
	}

	static int stm32_usbphyc_phy_exit(struct phy *phy)
	{
	struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
	struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc;

	usbphyc_phy->active = false;

	return stm32_usbphyc_pll_disable(usbphyc);
	}

	static int stm32_usbphyc_phy_power_on(struct phy *phy)
	{
	struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);

	return regulator_bulk_enable(NUM_SUPPLIES, usbphyc_phy->supplies);
	}

	static int stm32_usbphyc_phy_power_off(struct phy *phy)
	{
	struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);

	return regulator_bulk_disable(NUM_SUPPLIES, usbphyc_phy->supplies);
	}

	static const struct phy_ops stm32_usbphyc_phy_ops = {
	.init = stm32_usbphyc_phy_init,
	.exit = stm32_usbphyc_phy_exit,
	.power_on = stm32_usbphyc_phy_power_on,
	.power_off = stm32_usbphyc_phy_power_off,
	.owner = THIS_MODULE,
	};

	static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc,
	u32 utmi_switch)
	{
	if (!utmi_switch)
	stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_MISC,
	SWITHOST);
	else
	stm32_usbphyc_set_bits(usbphyc->base + STM32_USBPHYC_MISC,
	SWITHOST);
	usbphyc->switch_setup = utmi_switch;
	}

	static struct phy stm32_usbphyc_of_xlate(struct device dev,
	struct of_phandle_args *args)
	{
	struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev);
	struct stm32_usbphyc_phy *usbphyc_phy = NULL;
	struct device_node *phynode = args->np;
	int port = 0;

	for (port = 0; port < usbphyc->nphys; port++) {
	if (phynode == usbphyc->phys[port]->phy->dev.of_node) {
	usbphyc_phy = usbphyc->phys[port];
	break;
	}
	}
	if (!usbphyc_phy) {
	dev_err(dev, "failed to find phy\n");
	return ERR_PTR(-EINVAL);
	}

	if (((usbphyc_phy->index == 0) && (args->args_count != 0)) \|\|
	((usbphyc_phy->index == 1) && (args->args_count != 1))) {
	dev_err(dev, "invalid number of cells for phy port%d\n",
	usbphyc_phy->index);
	return ERR_PTR(-EINVAL);
	}

	/* Configure the UTMI switch for PHY port#2 */
	if (usbphyc_phy->index == 1) {
	if (usbphyc->switch_setup < 0) {
	stm32_usbphyc_switch_setup(usbphyc, args->args[0]);
	} else {
	if (args->args[0] != usbphyc->switch_setup) {
	dev_err(dev, "phy port1 already used\n");
	return ERR_PTR(-EBUSY);
	}
	}
	}

	return usbphyc_phy->phy;
	}

	static int stm32_usbphyc_probe(struct platform_device *pdev)
	{
	struct stm32_usbphyc *usbphyc;
	struct device *dev = &pdev->dev;
	struct device_node child, np = dev->of_node;
	struct resource *res;
	struct phy_provider *phy_provider;
	u32 version;
	int ret, port = 0;

	usbphyc = devm_kzalloc(dev, sizeof(*usbphyc), GFP_KERNEL);
	if (!usbphyc)
	return -ENOMEM;
	usbphyc->dev = dev;
	dev_set_drvdata(dev, usbphyc);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	usbphyc->base = devm_ioremap_resource(dev, res);
	if (IS_ERR(usbphyc->base))
	return PTR_ERR(usbphyc->base);

	usbphyc->clk = devm_clk_get(dev, 0);
	if (IS_ERR(usbphyc->clk)) {
	ret = PTR_ERR(usbphyc->clk);
	dev_err(dev, "clk get failed: %d\n", ret);
	return ret;
	}

	ret = clk_prepare_enable(usbphyc->clk);
	if (ret) {
	dev_err(dev, "clk enable failed: %d\n", ret);
	return ret;
	}

	usbphyc->rst = devm_reset_control_get(dev, 0);
	if (!IS_ERR(usbphyc->rst)) {
	reset_control_assert(usbphyc->rst);
	udelay(2);
	reset_control_deassert(usbphyc->rst);
	}

	usbphyc->switch_setup = -EINVAL;
	usbphyc->nphys = of_get_child_count(np);
	usbphyc->phys = devm_kcalloc(dev, usbphyc->nphys,
	sizeof(*usbphyc->phys), GFP_KERNEL);
	if (!usbphyc->phys) {
	ret = -ENOMEM;
	goto clk_disable;
	}

	for_each_child_of_node(np, child) {
	struct stm32_usbphyc_phy *usbphyc_phy;
	struct phy *phy;
	u32 index;
	int i;

	phy = devm_phy_create(dev, child, &stm32_usbphyc_phy_ops);
	if (IS_ERR(phy)) {
	ret = PTR_ERR(phy);
	if (ret != -EPROBE_DEFER)
	dev_err(dev, "failed to create phy%d: %d\n",
	port, ret);
	goto put_child;
	}

	usbphyc_phy = devm_kzalloc(dev, sizeof(*usbphyc_phy),
	GFP_KERNEL);
	if (!usbphyc_phy) {
	ret = -ENOMEM;
	goto put_child;
	}

	for (i = 0; i < NUM_SUPPLIES; i++)
	usbphyc_phy->supplies[i].supply = supplies_names[i];

	ret = devm_regulator_bulk_get(&phy->dev, NUM_SUPPLIES,
	usbphyc_phy->supplies);
	if (ret) {
	if (ret != -EPROBE_DEFER)
	dev_err(&phy->dev,
	"failed to get regulators: %d\n", ret);
	goto put_child;
	}

	ret = of_property_read_u32(child, "reg", &index);
	if (ret \|\| index > usbphyc->nphys) {
	dev_err(&phy->dev, "invalid reg property: %d\n", ret);
	goto put_child;
	}

	usbphyc->phys[port] = usbphyc_phy;
	phy_set_bus_width(phy, 8);
	phy_set_drvdata(phy, usbphyc_phy);

	usbphyc->phys[port]->phy = phy;
	usbphyc->phys[port]->usbphyc = usbphyc;
	usbphyc->phys[port]->index = index;
	usbphyc->phys[port]->active = false;

	port++;
	}

	phy_provider = devm_of_phy_provider_register(dev,
	stm32_usbphyc_of_xlate);
	if (IS_ERR(phy_provider)) {
	ret = PTR_ERR(phy_provider);
	dev_err(dev, "failed to register phy provider: %d\n", ret);
	goto clk_disable;
	}

	version = readl_relaxed(usbphyc->base + STM32_USBPHYC_VERSION);
	dev_info(dev, "registered rev:%lu.%lu\n",
	FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version));

	return 0;

	put_child:
	of_node_put(child);
	clk_disable:
	clk_disable_unprepare(usbphyc->clk);

	return ret;
	}

	static int stm32_usbphyc_remove(struct platform_device *pdev)
	{
	struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev);

	clk_disable_unprepare(usbphyc->clk);

	return 0;
	}

	static const struct of_device_id stm32_usbphyc_of_match[] = {
	{ .compatible = "st,stm32mp1-usbphyc", },
	{ },
	};
	MODULE_DEVICE_TABLE(of, stm32_usbphyc_of_match);

	static struct platform_driver stm32_usbphyc_driver = {
	.probe = stm32_usbphyc_probe,
	.remove = stm32_usbphyc_remove,
	.driver = {
	.of_match_table = stm32_usbphyc_of_match,
	.name = "stm32-usbphyc",
	}
	};
	module_platform_driver(stm32_usbphyc_driver);

	MODULE_DESCRIPTION("STMicroelectronics STM32 USBPHYC driver");
	MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
	MODULE_LICENSE("GPL v2");