| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * HD audio interface patch for Creative CA0132 chip |
| * |
| * Copyright (c) 2011, Creative Technology Ltd. |
| * |
| * Based on patch_ca0110.c |
| * Copyright (c) 2008 Takashi Iwai <tiwai@suse.de> |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/mutex.h> |
| #include <linux/module.h> |
| #include <linux/firmware.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/io.h> |
| #include <linux/pci.h> |
| #include <asm/io.h> |
| #include <sound/core.h> |
| #include <sound/hda_codec.h> |
| #include "hda_local.h" |
| #include "hda_auto_parser.h" |
| #include "hda_jack.h" |
| |
| #include "ca0132_regs.h" |
| |
| /* Enable this to see controls for tuning purpose. */ |
| /*#define ENABLE_TUNING_CONTROLS*/ |
| |
| #ifdef ENABLE_TUNING_CONTROLS |
| #include <sound/tlv.h> |
| #endif |
| |
| #define FLOAT_ZERO 0x00000000 |
| #define FLOAT_ONE 0x3f800000 |
| #define FLOAT_TWO 0x40000000 |
| #define FLOAT_THREE 0x40400000 |
| #define FLOAT_EIGHT 0x41000000 |
| #define FLOAT_MINUS_5 0xc0a00000 |
| |
| #define UNSOL_TAG_DSP 0x16 |
| |
| #define DSP_DMA_WRITE_BUFLEN_INIT (1UL<<18) |
| #define DSP_DMA_WRITE_BUFLEN_OVLY (1UL<<15) |
| |
| #define DMA_TRANSFER_FRAME_SIZE_NWORDS 8 |
| #define DMA_TRANSFER_MAX_FRAME_SIZE_NWORDS 32 |
| #define DMA_OVERLAY_FRAME_SIZE_NWORDS 2 |
| |
| #define MASTERCONTROL 0x80 |
| #define MASTERCONTROL_ALLOC_DMA_CHAN 10 |
| #define MASTERCONTROL_QUERY_SPEAKER_EQ_ADDRESS 60 |
| |
| #define WIDGET_CHIP_CTRL 0x15 |
| #define WIDGET_DSP_CTRL 0x16 |
| |
| #define MEM_CONNID_MICIN1 3 |
| #define MEM_CONNID_MICIN2 5 |
| #define MEM_CONNID_MICOUT1 12 |
| #define MEM_CONNID_MICOUT2 14 |
| #define MEM_CONNID_WUH 10 |
| #define MEM_CONNID_DSP 16 |
| #define MEM_CONNID_DMIC 100 |
| |
| #define SCP_SET 0 |
| #define SCP_GET 1 |
| |
| #define EFX_FILE "ctefx.bin" |
| #define DESKTOP_EFX_FILE "ctefx-desktop.bin" |
| #define R3DI_EFX_FILE "ctefx-r3di.bin" |
| |
| #ifdef CONFIG_SND_HDA_CODEC_CA0132_DSP |
| MODULE_FIRMWARE(EFX_FILE); |
| MODULE_FIRMWARE(DESKTOP_EFX_FILE); |
| MODULE_FIRMWARE(R3DI_EFX_FILE); |
| #endif |
| |
| static const char *const dirstr[2] = { "Playback", "Capture" }; |
| |
| #define NUM_OF_OUTPUTS 3 |
| enum { |
| SPEAKER_OUT, |
| HEADPHONE_OUT, |
| SURROUND_OUT |
| }; |
| |
| enum { |
| DIGITAL_MIC, |
| LINE_MIC_IN |
| }; |
| |
| /* Strings for Input Source Enum Control */ |
| static const char *const in_src_str[3] = {"Rear Mic", "Line", "Front Mic" }; |
| #define IN_SRC_NUM_OF_INPUTS 3 |
| enum { |
| REAR_MIC, |
| REAR_LINE_IN, |
| FRONT_MIC, |
| }; |
| |
| enum { |
| #define VNODE_START_NID 0x80 |
| VNID_SPK = VNODE_START_NID, /* Speaker vnid */ |
| VNID_MIC, |
| VNID_HP_SEL, |
| VNID_AMIC1_SEL, |
| VNID_HP_ASEL, |
| VNID_AMIC1_ASEL, |
| VNODE_END_NID, |
| #define VNODES_COUNT (VNODE_END_NID - VNODE_START_NID) |
| |
| #define EFFECT_START_NID 0x90 |
| #define OUT_EFFECT_START_NID EFFECT_START_NID |
| SURROUND = OUT_EFFECT_START_NID, |
| CRYSTALIZER, |
| DIALOG_PLUS, |
| SMART_VOLUME, |
| X_BASS, |
| EQUALIZER, |
| OUT_EFFECT_END_NID, |
| #define OUT_EFFECTS_COUNT (OUT_EFFECT_END_NID - OUT_EFFECT_START_NID) |
| |
| #define IN_EFFECT_START_NID OUT_EFFECT_END_NID |
| ECHO_CANCELLATION = IN_EFFECT_START_NID, |
| VOICE_FOCUS, |
| MIC_SVM, |
| NOISE_REDUCTION, |
| IN_EFFECT_END_NID, |
| #define IN_EFFECTS_COUNT (IN_EFFECT_END_NID - IN_EFFECT_START_NID) |
| |
| VOICEFX = IN_EFFECT_END_NID, |
| PLAY_ENHANCEMENT, |
| CRYSTAL_VOICE, |
| EFFECT_END_NID, |
| OUTPUT_SOURCE_ENUM, |
| INPUT_SOURCE_ENUM, |
| XBASS_XOVER, |
| EQ_PRESET_ENUM, |
| SMART_VOLUME_ENUM, |
| MIC_BOOST_ENUM, |
| AE5_HEADPHONE_GAIN_ENUM, |
| AE5_SOUND_FILTER_ENUM, |
| ZXR_HEADPHONE_GAIN |
| #define EFFECTS_COUNT (EFFECT_END_NID - EFFECT_START_NID) |
| }; |
| |
| /* Effects values size*/ |
| #define EFFECT_VALS_MAX_COUNT 12 |
| |
| /* |
| * Default values for the effect slider controls, they are in order of their |
| * effect NID's. Surround, Crystalizer, Dialog Plus, Smart Volume, and then |
| * X-bass. |
| */ |
| static const unsigned int effect_slider_defaults[] = {67, 65, 50, 74, 50}; |
| /* Amount of effect level sliders for ca0132_alt controls. */ |
| #define EFFECT_LEVEL_SLIDERS 5 |
| |
| /* Latency introduced by DSP blocks in milliseconds. */ |
| #define DSP_CAPTURE_INIT_LATENCY 0 |
| #define DSP_CRYSTAL_VOICE_LATENCY 124 |
| #define DSP_PLAYBACK_INIT_LATENCY 13 |
| #define DSP_PLAY_ENHANCEMENT_LATENCY 30 |
| #define DSP_SPEAKER_OUT_LATENCY 7 |
| |
| struct ct_effect { |
| char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; |
| hda_nid_t nid; |
| int mid; /*effect module ID*/ |
| int reqs[EFFECT_VALS_MAX_COUNT]; /*effect module request*/ |
| int direct; /* 0:output; 1:input*/ |
| int params; /* number of default non-on/off params */ |
| /*effect default values, 1st is on/off. */ |
| unsigned int def_vals[EFFECT_VALS_MAX_COUNT]; |
| }; |
| |
| #define EFX_DIR_OUT 0 |
| #define EFX_DIR_IN 1 |
| |
| static const struct ct_effect ca0132_effects[EFFECTS_COUNT] = { |
| { .name = "Surround", |
| .nid = SURROUND, |
| .mid = 0x96, |
| .reqs = {0, 1}, |
| .direct = EFX_DIR_OUT, |
| .params = 1, |
| .def_vals = {0x3F800000, 0x3F2B851F} |
| }, |
| { .name = "Crystalizer", |
| .nid = CRYSTALIZER, |
| .mid = 0x96, |
| .reqs = {7, 8}, |
| .direct = EFX_DIR_OUT, |
| .params = 1, |
| .def_vals = {0x3F800000, 0x3F266666} |
| }, |
| { .name = "Dialog Plus", |
| .nid = DIALOG_PLUS, |
| .mid = 0x96, |
| .reqs = {2, 3}, |
| .direct = EFX_DIR_OUT, |
| .params = 1, |
| .def_vals = {0x00000000, 0x3F000000} |
| }, |
| { .name = "Smart Volume", |
| .nid = SMART_VOLUME, |
| .mid = 0x96, |
| .reqs = {4, 5, 6}, |
| .direct = EFX_DIR_OUT, |
| .params = 2, |
| .def_vals = {0x3F800000, 0x3F3D70A4, 0x00000000} |
| }, |
| { .name = "X-Bass", |
| .nid = X_BASS, |
| .mid = 0x96, |
| .reqs = {24, 23, 25}, |
| .direct = EFX_DIR_OUT, |
| .params = 2, |
| .def_vals = {0x3F800000, 0x42A00000, 0x3F000000} |
| }, |
| { .name = "Equalizer", |
| .nid = EQUALIZER, |
| .mid = 0x96, |
| .reqs = {9, 10, 11, 12, 13, 14, |
| 15, 16, 17, 18, 19, 20}, |
| .direct = EFX_DIR_OUT, |
| .params = 11, |
| .def_vals = {0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000} |
| }, |
| { .name = "Echo Cancellation", |
| .nid = ECHO_CANCELLATION, |
| .mid = 0x95, |
| .reqs = {0, 1, 2, 3}, |
| .direct = EFX_DIR_IN, |
| .params = 3, |
| .def_vals = {0x00000000, 0x3F3A9692, 0x00000000, 0x00000000} |
| }, |
| { .name = "Voice Focus", |
| .nid = VOICE_FOCUS, |
| .mid = 0x95, |
| .reqs = {6, 7, 8, 9}, |
| .direct = EFX_DIR_IN, |
| .params = 3, |
| .def_vals = {0x3F800000, 0x3D7DF3B6, 0x41F00000, 0x41F00000} |
| }, |
| { .name = "Mic SVM", |
| .nid = MIC_SVM, |
| .mid = 0x95, |
| .reqs = {44, 45}, |
| .direct = EFX_DIR_IN, |
| .params = 1, |
| .def_vals = {0x00000000, 0x3F3D70A4} |
| }, |
| { .name = "Noise Reduction", |
| .nid = NOISE_REDUCTION, |
| .mid = 0x95, |
| .reqs = {4, 5}, |
| .direct = EFX_DIR_IN, |
| .params = 1, |
| .def_vals = {0x3F800000, 0x3F000000} |
| }, |
| { .name = "VoiceFX", |
| .nid = VOICEFX, |
| .mid = 0x95, |
| .reqs = {10, 11, 12, 13, 14, 15, 16, 17, 18}, |
| .direct = EFX_DIR_IN, |
| .params = 8, |
| .def_vals = {0x00000000, 0x43C80000, 0x44AF0000, 0x44FA0000, |
| 0x3F800000, 0x3F800000, 0x3F800000, 0x00000000, |
| 0x00000000} |
| } |
| }; |
| |
| /* Tuning controls */ |
| #ifdef ENABLE_TUNING_CONTROLS |
| |
| enum { |
| #define TUNING_CTL_START_NID 0xC0 |
| WEDGE_ANGLE = TUNING_CTL_START_NID, |
| SVM_LEVEL, |
| EQUALIZER_BAND_0, |
| EQUALIZER_BAND_1, |
| EQUALIZER_BAND_2, |
| EQUALIZER_BAND_3, |
| EQUALIZER_BAND_4, |
| EQUALIZER_BAND_5, |
| EQUALIZER_BAND_6, |
| EQUALIZER_BAND_7, |
| EQUALIZER_BAND_8, |
| EQUALIZER_BAND_9, |
| TUNING_CTL_END_NID |
| #define TUNING_CTLS_COUNT (TUNING_CTL_END_NID - TUNING_CTL_START_NID) |
| }; |
| |
| struct ct_tuning_ctl { |
| char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; |
| hda_nid_t parent_nid; |
| hda_nid_t nid; |
| int mid; /*effect module ID*/ |
| int req; /*effect module request*/ |
| int direct; /* 0:output; 1:input*/ |
| unsigned int def_val;/*effect default values*/ |
| }; |
| |
| static const struct ct_tuning_ctl ca0132_tuning_ctls[] = { |
| { .name = "Wedge Angle", |
| .parent_nid = VOICE_FOCUS, |
| .nid = WEDGE_ANGLE, |
| .mid = 0x95, |
| .req = 8, |
| .direct = EFX_DIR_IN, |
| .def_val = 0x41F00000 |
| }, |
| { .name = "SVM Level", |
| .parent_nid = MIC_SVM, |
| .nid = SVM_LEVEL, |
| .mid = 0x95, |
| .req = 45, |
| .direct = EFX_DIR_IN, |
| .def_val = 0x3F3D70A4 |
| }, |
| { .name = "EQ Band0", |
| .parent_nid = EQUALIZER, |
| .nid = EQUALIZER_BAND_0, |
| .mid = 0x96, |
| .req = 11, |
| .direct = EFX_DIR_OUT, |
| .def_val = 0x00000000 |
| }, |
| { .name = "EQ Band1", |
| .parent_nid = EQUALIZER, |
| .nid = EQUALIZER_BAND_1, |
| .mid = 0x96, |
| .req = 12, |
| .direct = EFX_DIR_OUT, |
| .def_val = 0x00000000 |
| }, |
| { .name = "EQ Band2", |
| .parent_nid = EQUALIZER, |
| .nid = EQUALIZER_BAND_2, |
| .mid = 0x96, |
| .req = 13, |
| .direct = EFX_DIR_OUT, |
| .def_val = 0x00000000 |
| }, |
| { .name = "EQ Band3", |
| .parent_nid = EQUALIZER, |
| .nid = EQUALIZER_BAND_3, |
| .mid = 0x96, |
| .req = 14, |
| .direct = EFX_DIR_OUT, |
| .def_val = 0x00000000 |
| }, |
| { .name = "EQ Band4", |
| .parent_nid = EQUALIZER, |
| .nid = EQUALIZER_BAND_4, |
| .mid = 0x96, |
| .req = 15, |
| .direct = EFX_DIR_OUT, |
| .def_val = 0x00000000 |
| }, |
| { .name = "EQ Band5", |
| .parent_nid = EQUALIZER, |
| .nid = EQUALIZER_BAND_5, |
| .mid = 0x96, |
| .req = 16, |
| .direct = EFX_DIR_OUT, |
| .def_val = 0x00000000 |
| }, |
| { .name = "EQ Band6", |
| .parent_nid = EQUALIZER, |
| .nid = EQUALIZER_BAND_6, |
| .mid = 0x96, |
| .req = 17, |
| .direct = EFX_DIR_OUT, |
| .def_val = 0x00000000 |
| }, |
| { .name = "EQ Band7", |
| .parent_nid = EQUALIZER, |
| .nid = EQUALIZER_BAND_7, |
| .mid = 0x96, |
| .req = 18, |
| .direct = EFX_DIR_OUT, |
| .def_val = 0x00000000 |
| }, |
| { .name = "EQ Band8", |
| .parent_nid = EQUALIZER, |
| .nid = EQUALIZER_BAND_8, |
| .mid = 0x96, |
| .req = 19, |
| .direct = EFX_DIR_OUT, |
| .def_val = 0x00000000 |
| }, |
| { .name = "EQ Band9", |
| .parent_nid = EQUALIZER, |
| .nid = EQUALIZER_BAND_9, |
| .mid = 0x96, |
| .req = 20, |
| .direct = EFX_DIR_OUT, |
| .def_val = 0x00000000 |
| } |
| }; |
| #endif |
| |
| /* Voice FX Presets */ |
| #define VOICEFX_MAX_PARAM_COUNT 9 |
| |
| struct ct_voicefx { |
| char *name; |
| hda_nid_t nid; |
| int mid; |
| int reqs[VOICEFX_MAX_PARAM_COUNT]; /*effect module request*/ |
| }; |
| |
| struct ct_voicefx_preset { |
| char *name; /*preset name*/ |
| unsigned int vals[VOICEFX_MAX_PARAM_COUNT]; |
| }; |
| |
| static const struct ct_voicefx ca0132_voicefx = { |
| .name = "VoiceFX Capture Switch", |
| .nid = VOICEFX, |
| .mid = 0x95, |
| .reqs = {10, 11, 12, 13, 14, 15, 16, 17, 18} |
| }; |
| |
| static const struct ct_voicefx_preset ca0132_voicefx_presets[] = { |
| { .name = "Neutral", |
| .vals = { 0x00000000, 0x43C80000, 0x44AF0000, |
| 0x44FA0000, 0x3F800000, 0x3F800000, |
| 0x3F800000, 0x00000000, 0x00000000 } |
| }, |
| { .name = "Female2Male", |
| .vals = { 0x3F800000, 0x43C80000, 0x44AF0000, |
| 0x44FA0000, 0x3F19999A, 0x3F866666, |
| 0x3F800000, 0x00000000, 0x00000000 } |
| }, |
| { .name = "Male2Female", |
| .vals = { 0x3F800000, 0x43C80000, 0x44AF0000, |
| 0x450AC000, 0x4017AE14, 0x3F6B851F, |
| 0x3F800000, 0x00000000, 0x00000000 } |
| }, |
| { .name = "ScrappyKid", |
| .vals = { 0x3F800000, 0x43C80000, 0x44AF0000, |
| 0x44FA0000, 0x40400000, 0x3F28F5C3, |
| 0x3F800000, 0x00000000, 0x00000000 } |
| }, |
| { .name = "Elderly", |
| .vals = { 0x3F800000, 0x44324000, 0x44BB8000, |
| 0x44E10000, 0x3FB33333, 0x3FB9999A, |
| 0x3F800000, 0x3E3A2E43, 0x00000000 } |
| }, |
| { .name = "Orc", |
| .vals = { 0x3F800000, 0x43EA0000, 0x44A52000, |
| 0x45098000, 0x3F266666, 0x3FC00000, |
| 0x3F800000, 0x00000000, 0x00000000 } |
| }, |
| { .name = "Elf", |
| .vals = { 0x3F800000, 0x43C70000, 0x44AE6000, |
| 0x45193000, 0x3F8E147B, 0x3F75C28F, |
| 0x3F800000, 0x00000000, 0x00000000 } |
| }, |
| { .name = "Dwarf", |
| .vals = { 0x3F800000, 0x43930000, 0x44BEE000, |
| 0x45007000, 0x3F451EB8, 0x3F7851EC, |
| 0x3F800000, 0x00000000, 0x00000000 } |
| }, |
| { .name = "AlienBrute", |
| .vals = { 0x3F800000, 0x43BFC5AC, 0x44B28FDF, |
| 0x451F6000, 0x3F266666, 0x3FA7D945, |
| 0x3F800000, 0x3CF5C28F, 0x00000000 } |
| }, |
| { .name = "Robot", |
| .vals = { 0x3F800000, 0x43C80000, 0x44AF0000, |
| 0x44FA0000, 0x3FB2718B, 0x3F800000, |
| 0xBC07010E, 0x00000000, 0x00000000 } |
| }, |
| { .name = "Marine", |
| .vals = { 0x3F800000, 0x43C20000, 0x44906000, |
| 0x44E70000, 0x3F4CCCCD, 0x3F8A3D71, |
| 0x3F0A3D71, 0x00000000, 0x00000000 } |
| }, |
| { .name = "Emo", |
| .vals = { 0x3F800000, 0x43C80000, 0x44AF0000, |
| 0x44FA0000, 0x3F800000, 0x3F800000, |
| 0x3E4CCCCD, 0x00000000, 0x00000000 } |
| }, |
| { .name = "DeepVoice", |
| .vals = { 0x3F800000, 0x43A9C5AC, 0x44AA4FDF, |
| 0x44FFC000, 0x3EDBB56F, 0x3F99C4CA, |
| 0x3F800000, 0x00000000, 0x00000000 } |
| }, |
| { .name = "Munchkin", |
| .vals = { 0x3F800000, 0x43C80000, 0x44AF0000, |
| 0x44FA0000, 0x3F800000, 0x3F1A043C, |
| 0x3F800000, 0x00000000, 0x00000000 } |
| } |
| }; |
| |
| /* ca0132 EQ presets, taken from Windows Sound Blaster Z Driver */ |
| |
| #define EQ_PRESET_MAX_PARAM_COUNT 11 |
| |
| struct ct_eq { |
| char *name; |
| hda_nid_t nid; |
| int mid; |
| int reqs[EQ_PRESET_MAX_PARAM_COUNT]; /*effect module request*/ |
| }; |
| |
| struct ct_eq_preset { |
| char *name; /*preset name*/ |
| unsigned int vals[EQ_PRESET_MAX_PARAM_COUNT]; |
| }; |
| |
| static const struct ct_eq ca0132_alt_eq_enum = { |
| .name = "FX: Equalizer Preset Switch", |
| .nid = EQ_PRESET_ENUM, |
| .mid = 0x96, |
| .reqs = {10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20} |
| }; |
| |
| |
| static const struct ct_eq_preset ca0132_alt_eq_presets[] = { |
| { .name = "Flat", |
| .vals = { 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000 } |
| }, |
| { .name = "Acoustic", |
| .vals = { 0x00000000, 0x00000000, 0x3F8CCCCD, |
| 0x40000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x40000000, |
| 0x40000000, 0x40000000 } |
| }, |
| { .name = "Classical", |
| .vals = { 0x00000000, 0x00000000, 0x40C00000, |
| 0x40C00000, 0x40466666, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, |
| 0x40466666, 0x40466666 } |
| }, |
| { .name = "Country", |
| .vals = { 0x00000000, 0xBF99999A, 0x00000000, |
| 0x3FA66666, 0x3FA66666, 0x3F8CCCCD, |
| 0x00000000, 0x00000000, 0x40000000, |
| 0x40466666, 0x40800000 } |
| }, |
| { .name = "Dance", |
| .vals = { 0x00000000, 0xBF99999A, 0x40000000, |
| 0x40466666, 0x40866666, 0xBF99999A, |
| 0xBF99999A, 0x00000000, 0x00000000, |
| 0x40800000, 0x40800000 } |
| }, |
| { .name = "Jazz", |
| .vals = { 0x00000000, 0x00000000, 0x00000000, |
| 0x3F8CCCCD, 0x40800000, 0x40800000, |
| 0x40800000, 0x00000000, 0x3F8CCCCD, |
| 0x40466666, 0x40466666 } |
| }, |
| { .name = "New Age", |
| .vals = { 0x00000000, 0x00000000, 0x40000000, |
| 0x40000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x3F8CCCCD, 0x40000000, |
| 0x40000000, 0x40000000 } |
| }, |
| { .name = "Pop", |
| .vals = { 0x00000000, 0xBFCCCCCD, 0x00000000, |
| 0x40000000, 0x40000000, 0x00000000, |
| 0xBF99999A, 0xBF99999A, 0x00000000, |
| 0x40466666, 0x40C00000 } |
| }, |
| { .name = "Rock", |
| .vals = { 0x00000000, 0xBF99999A, 0xBF99999A, |
| 0x3F8CCCCD, 0x40000000, 0xBF99999A, |
| 0xBF99999A, 0x00000000, 0x00000000, |
| 0x40800000, 0x40800000 } |
| }, |
| { .name = "Vocal", |
| .vals = { 0x00000000, 0xC0000000, 0xBF99999A, |
| 0xBF99999A, 0x00000000, 0x40466666, |
| 0x40800000, 0x40466666, 0x00000000, |
| 0x00000000, 0x3F8CCCCD } |
| } |
| }; |
| |
| /* DSP command sequences for ca0132_alt_select_out */ |
| #define ALT_OUT_SET_MAX_COMMANDS 9 /* Max number of commands in sequence */ |
| struct ca0132_alt_out_set { |
| char *name; /*preset name*/ |
| unsigned char commands; |
| unsigned int mids[ALT_OUT_SET_MAX_COMMANDS]; |
| unsigned int reqs[ALT_OUT_SET_MAX_COMMANDS]; |
| unsigned int vals[ALT_OUT_SET_MAX_COMMANDS]; |
| }; |
| |
| static const struct ca0132_alt_out_set alt_out_presets[] = { |
| { .name = "Line Out", |
| .commands = 7, |
| .mids = { 0x96, 0x96, 0x96, 0x8F, |
| 0x96, 0x96, 0x96 }, |
| .reqs = { 0x19, 0x17, 0x18, 0x01, |
| 0x1F, 0x15, 0x3A }, |
| .vals = { 0x3F000000, 0x42A00000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000 } |
| }, |
| { .name = "Headphone", |
| .commands = 7, |
| .mids = { 0x96, 0x96, 0x96, 0x8F, |
| 0x96, 0x96, 0x96 }, |
| .reqs = { 0x19, 0x17, 0x18, 0x01, |
| 0x1F, 0x15, 0x3A }, |
| .vals = { 0x3F000000, 0x42A00000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000 } |
| }, |
| { .name = "Surround", |
| .commands = 8, |
| .mids = { 0x96, 0x8F, 0x96, 0x96, |
| 0x96, 0x96, 0x96, 0x96 }, |
| .reqs = { 0x18, 0x01, 0x1F, 0x15, |
| 0x3A, 0x1A, 0x1B, 0x1C }, |
| .vals = { 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000 } |
| } |
| }; |
| |
| /* |
| * DSP volume setting structs. Req 1 is left volume, req 2 is right volume, |
| * and I don't know what the third req is, but it's always zero. I assume it's |
| * some sort of update or set command to tell the DSP there's new volume info. |
| */ |
| #define DSP_VOL_OUT 0 |
| #define DSP_VOL_IN 1 |
| |
| struct ct_dsp_volume_ctl { |
| hda_nid_t vnid; |
| int mid; /* module ID*/ |
| unsigned int reqs[3]; /* scp req ID */ |
| }; |
| |
| static const struct ct_dsp_volume_ctl ca0132_alt_vol_ctls[] = { |
| { .vnid = VNID_SPK, |
| .mid = 0x32, |
| .reqs = {3, 4, 2} |
| }, |
| { .vnid = VNID_MIC, |
| .mid = 0x37, |
| .reqs = {2, 3, 1} |
| } |
| }; |
| |
| /* Values for ca0113_mmio_command_set for selecting output. */ |
| #define AE5_CA0113_OUT_SET_COMMANDS 6 |
| struct ae5_ca0113_output_set { |
| unsigned int group[AE5_CA0113_OUT_SET_COMMANDS]; |
| unsigned int target[AE5_CA0113_OUT_SET_COMMANDS]; |
| unsigned int vals[AE5_CA0113_OUT_SET_COMMANDS]; |
| }; |
| |
| static const struct ae5_ca0113_output_set ae5_ca0113_output_presets[] = { |
| { .group = { 0x30, 0x30, 0x48, 0x48, 0x48, 0x30 }, |
| .target = { 0x2e, 0x30, 0x0d, 0x17, 0x19, 0x32 }, |
| .vals = { 0x00, 0x00, 0x40, 0x00, 0x00, 0x3f } |
| }, |
| { .group = { 0x30, 0x30, 0x48, 0x48, 0x48, 0x30 }, |
| .target = { 0x2e, 0x30, 0x0d, 0x17, 0x19, 0x32 }, |
| .vals = { 0x3f, 0x3f, 0x00, 0x00, 0x00, 0x00 } |
| }, |
| { .group = { 0x30, 0x30, 0x48, 0x48, 0x48, 0x30 }, |
| .target = { 0x2e, 0x30, 0x0d, 0x17, 0x19, 0x32 }, |
| .vals = { 0x00, 0x00, 0x40, 0x00, 0x00, 0x3f } |
| } |
| }; |
| |
| /* ae5 ca0113 command sequences to set headphone gain levels. */ |
| #define AE5_HEADPHONE_GAIN_PRESET_MAX_COMMANDS 4 |
| struct ae5_headphone_gain_set { |
| char *name; |
| unsigned int vals[AE5_HEADPHONE_GAIN_PRESET_MAX_COMMANDS]; |
| }; |
| |
| static const struct ae5_headphone_gain_set ae5_headphone_gain_presets[] = { |
| { .name = "Low (16-31", |
| .vals = { 0xff, 0x2c, 0xf5, 0x32 } |
| }, |
| { .name = "Medium (32-149", |
| .vals = { 0x38, 0xa8, 0x3e, 0x4c } |
| }, |
| { .name = "High (150-600", |
| .vals = { 0xff, 0xff, 0xff, 0x7f } |
| } |
| }; |
| |
| struct ae5_filter_set { |
| char *name; |
| unsigned int val; |
| }; |
| |
| static const struct ae5_filter_set ae5_filter_presets[] = { |
| { .name = "Slow Roll Off", |
| .val = 0xa0 |
| }, |
| { .name = "Minimum Phase", |
| .val = 0xc0 |
| }, |
| { .name = "Fast Roll Off", |
| .val = 0x80 |
| } |
| }; |
| |
| enum hda_cmd_vendor_io { |
| /* for DspIO node */ |
| VENDOR_DSPIO_SCP_WRITE_DATA_LOW = 0x000, |
| VENDOR_DSPIO_SCP_WRITE_DATA_HIGH = 0x100, |
| |
| VENDOR_DSPIO_STATUS = 0xF01, |
| VENDOR_DSPIO_SCP_POST_READ_DATA = 0x702, |
| VENDOR_DSPIO_SCP_READ_DATA = 0xF02, |
| VENDOR_DSPIO_DSP_INIT = 0x703, |
| VENDOR_DSPIO_SCP_POST_COUNT_QUERY = 0x704, |
| VENDOR_DSPIO_SCP_READ_COUNT = 0xF04, |
| |
| /* for ChipIO node */ |
| VENDOR_CHIPIO_ADDRESS_LOW = 0x000, |
| VENDOR_CHIPIO_ADDRESS_HIGH = 0x100, |
| VENDOR_CHIPIO_STREAM_FORMAT = 0x200, |
| VENDOR_CHIPIO_DATA_LOW = 0x300, |
| VENDOR_CHIPIO_DATA_HIGH = 0x400, |
| |
| VENDOR_CHIPIO_8051_WRITE_DIRECT = 0x500, |
| VENDOR_CHIPIO_8051_READ_DIRECT = 0xD00, |
| |
| VENDOR_CHIPIO_GET_PARAMETER = 0xF00, |
| VENDOR_CHIPIO_STATUS = 0xF01, |
| VENDOR_CHIPIO_HIC_POST_READ = 0x702, |
| VENDOR_CHIPIO_HIC_READ_DATA = 0xF03, |
| |
| VENDOR_CHIPIO_8051_DATA_WRITE = 0x707, |
| VENDOR_CHIPIO_8051_DATA_READ = 0xF07, |
| VENDOR_CHIPIO_8051_PMEM_READ = 0xF08, |
| VENDOR_CHIPIO_8051_IRAM_WRITE = 0x709, |
| VENDOR_CHIPIO_8051_IRAM_READ = 0xF09, |
| |
| VENDOR_CHIPIO_CT_EXTENSIONS_ENABLE = 0x70A, |
| VENDOR_CHIPIO_CT_EXTENSIONS_GET = 0xF0A, |
| |
| VENDOR_CHIPIO_PLL_PMU_WRITE = 0x70C, |
| VENDOR_CHIPIO_PLL_PMU_READ = 0xF0C, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW = 0x70D, |
| VENDOR_CHIPIO_8051_ADDRESS_HIGH = 0x70E, |
| VENDOR_CHIPIO_FLAG_SET = 0x70F, |
| VENDOR_CHIPIO_FLAGS_GET = 0xF0F, |
| VENDOR_CHIPIO_PARAM_SET = 0x710, |
| VENDOR_CHIPIO_PARAM_GET = 0xF10, |
| |
| VENDOR_CHIPIO_PORT_ALLOC_CONFIG_SET = 0x711, |
| VENDOR_CHIPIO_PORT_ALLOC_SET = 0x712, |
| VENDOR_CHIPIO_PORT_ALLOC_GET = 0xF12, |
| VENDOR_CHIPIO_PORT_FREE_SET = 0x713, |
| |
| VENDOR_CHIPIO_PARAM_EX_ID_GET = 0xF17, |
| VENDOR_CHIPIO_PARAM_EX_ID_SET = 0x717, |
| VENDOR_CHIPIO_PARAM_EX_VALUE_GET = 0xF18, |
| VENDOR_CHIPIO_PARAM_EX_VALUE_SET = 0x718, |
| |
| VENDOR_CHIPIO_DMIC_CTL_SET = 0x788, |
| VENDOR_CHIPIO_DMIC_CTL_GET = 0xF88, |
| VENDOR_CHIPIO_DMIC_PIN_SET = 0x789, |
| VENDOR_CHIPIO_DMIC_PIN_GET = 0xF89, |
| VENDOR_CHIPIO_DMIC_MCLK_SET = 0x78A, |
| VENDOR_CHIPIO_DMIC_MCLK_GET = 0xF8A, |
| |
| VENDOR_CHIPIO_EAPD_SEL_SET = 0x78D |
| }; |
| |
| /* |
| * Control flag IDs |
| */ |
| enum control_flag_id { |
| /* Connection manager stream setup is bypassed/enabled */ |
| CONTROL_FLAG_C_MGR = 0, |
| /* DSP DMA is bypassed/enabled */ |
| CONTROL_FLAG_DMA = 1, |
| /* 8051 'idle' mode is disabled/enabled */ |
| CONTROL_FLAG_IDLE_ENABLE = 2, |
| /* Tracker for the SPDIF-in path is bypassed/enabled */ |
| CONTROL_FLAG_TRACKER = 3, |
| /* DigitalOut to Spdif2Out connection is disabled/enabled */ |
| CONTROL_FLAG_SPDIF2OUT = 4, |
| /* Digital Microphone is disabled/enabled */ |
| CONTROL_FLAG_DMIC = 5, |
| /* ADC_B rate is 48 kHz/96 kHz */ |
| CONTROL_FLAG_ADC_B_96KHZ = 6, |
| /* ADC_C rate is 48 kHz/96 kHz */ |
| CONTROL_FLAG_ADC_C_96KHZ = 7, |
| /* DAC rate is 48 kHz/96 kHz (affects all DACs) */ |
| CONTROL_FLAG_DAC_96KHZ = 8, |
| /* DSP rate is 48 kHz/96 kHz */ |
| CONTROL_FLAG_DSP_96KHZ = 9, |
| /* SRC clock is 98 MHz/196 MHz (196 MHz forces rate to 96 KHz) */ |
| CONTROL_FLAG_SRC_CLOCK_196MHZ = 10, |
| /* SRC rate is 48 kHz/96 kHz (48 kHz disabled when clock is 196 MHz) */ |
| CONTROL_FLAG_SRC_RATE_96KHZ = 11, |
| /* Decode Loop (DSP->SRC->DSP) is disabled/enabled */ |
| CONTROL_FLAG_DECODE_LOOP = 12, |
| /* De-emphasis filter on DAC-1 disabled/enabled */ |
| CONTROL_FLAG_DAC1_DEEMPHASIS = 13, |
| /* De-emphasis filter on DAC-2 disabled/enabled */ |
| CONTROL_FLAG_DAC2_DEEMPHASIS = 14, |
| /* De-emphasis filter on DAC-3 disabled/enabled */ |
| CONTROL_FLAG_DAC3_DEEMPHASIS = 15, |
| /* High-pass filter on ADC_B disabled/enabled */ |
| CONTROL_FLAG_ADC_B_HIGH_PASS = 16, |
| /* High-pass filter on ADC_C disabled/enabled */ |
| CONTROL_FLAG_ADC_C_HIGH_PASS = 17, |
| /* Common mode on Port_A disabled/enabled */ |
| CONTROL_FLAG_PORT_A_COMMON_MODE = 18, |
| /* Common mode on Port_D disabled/enabled */ |
| CONTROL_FLAG_PORT_D_COMMON_MODE = 19, |
| /* Impedance for ramp generator on Port_A 16 Ohm/10K Ohm */ |
| CONTROL_FLAG_PORT_A_10KOHM_LOAD = 20, |
| /* Impedance for ramp generator on Port_D, 16 Ohm/10K Ohm */ |
| CONTROL_FLAG_PORT_D_10KOHM_LOAD = 21, |
| /* ASI rate is 48kHz/96kHz */ |
| CONTROL_FLAG_ASI_96KHZ = 22, |
| /* DAC power settings able to control attached ports no/yes */ |
| CONTROL_FLAG_DACS_CONTROL_PORTS = 23, |
| /* Clock Stop OK reporting is disabled/enabled */ |
| CONTROL_FLAG_CONTROL_STOP_OK_ENABLE = 24, |
| /* Number of control flags */ |
| CONTROL_FLAGS_MAX = (CONTROL_FLAG_CONTROL_STOP_OK_ENABLE+1) |
| }; |
| |
| /* |
| * Control parameter IDs |
| */ |
| enum control_param_id { |
| /* 0: None, 1: Mic1In*/ |
| CONTROL_PARAM_VIP_SOURCE = 1, |
| /* 0: force HDA, 1: allow DSP if HDA Spdif1Out stream is idle */ |
| CONTROL_PARAM_SPDIF1_SOURCE = 2, |
| /* Port A output stage gain setting to use when 16 Ohm output |
| * impedance is selected*/ |
| CONTROL_PARAM_PORTA_160OHM_GAIN = 8, |
| /* Port D output stage gain setting to use when 16 Ohm output |
| * impedance is selected*/ |
| CONTROL_PARAM_PORTD_160OHM_GAIN = 10, |
| |
| /* |
| * This control param name was found in the 8051 memory, and makes |
| * sense given the fact the AE-5 uses it and has the ASI flag set. |
| */ |
| CONTROL_PARAM_ASI = 23, |
| |
| /* Stream Control */ |
| |
| /* Select stream with the given ID */ |
| CONTROL_PARAM_STREAM_ID = 24, |
| /* Source connection point for the selected stream */ |
| CONTROL_PARAM_STREAM_SOURCE_CONN_POINT = 25, |
| /* Destination connection point for the selected stream */ |
| CONTROL_PARAM_STREAM_DEST_CONN_POINT = 26, |
| /* Number of audio channels in the selected stream */ |
| CONTROL_PARAM_STREAMS_CHANNELS = 27, |
| /*Enable control for the selected stream */ |
| CONTROL_PARAM_STREAM_CONTROL = 28, |
| |
| /* Connection Point Control */ |
| |
| /* Select connection point with the given ID */ |
| CONTROL_PARAM_CONN_POINT_ID = 29, |
| /* Connection point sample rate */ |
| CONTROL_PARAM_CONN_POINT_SAMPLE_RATE = 30, |
| |
| /* Node Control */ |
| |
| /* Select HDA node with the given ID */ |
| CONTROL_PARAM_NODE_ID = 31 |
| }; |
| |
| /* |
| * Dsp Io Status codes |
| */ |
| enum hda_vendor_status_dspio { |
| /* Success */ |
| VENDOR_STATUS_DSPIO_OK = 0x00, |
| /* Busy, unable to accept new command, the host must retry */ |
| VENDOR_STATUS_DSPIO_BUSY = 0x01, |
| /* SCP command queue is full */ |
| VENDOR_STATUS_DSPIO_SCP_COMMAND_QUEUE_FULL = 0x02, |
| /* SCP response queue is empty */ |
| VENDOR_STATUS_DSPIO_SCP_RESPONSE_QUEUE_EMPTY = 0x03 |
| }; |
| |
| /* |
| * Chip Io Status codes |
| */ |
| enum hda_vendor_status_chipio { |
| /* Success */ |
| VENDOR_STATUS_CHIPIO_OK = 0x00, |
| /* Busy, unable to accept new command, the host must retry */ |
| VENDOR_STATUS_CHIPIO_BUSY = 0x01 |
| }; |
| |
| /* |
| * CA0132 sample rate |
| */ |
| enum ca0132_sample_rate { |
| SR_6_000 = 0x00, |
| SR_8_000 = 0x01, |
| SR_9_600 = 0x02, |
| SR_11_025 = 0x03, |
| SR_16_000 = 0x04, |
| SR_22_050 = 0x05, |
| SR_24_000 = 0x06, |
| SR_32_000 = 0x07, |
| SR_44_100 = 0x08, |
| SR_48_000 = 0x09, |
| SR_88_200 = 0x0A, |
| SR_96_000 = 0x0B, |
| SR_144_000 = 0x0C, |
| SR_176_400 = 0x0D, |
| SR_192_000 = 0x0E, |
| SR_384_000 = 0x0F, |
| |
| SR_COUNT = 0x10, |
| |
| SR_RATE_UNKNOWN = 0x1F |
| }; |
| |
| enum dsp_download_state { |
| DSP_DOWNLOAD_FAILED = -1, |
| DSP_DOWNLOAD_INIT = 0, |
| DSP_DOWNLOADING = 1, |
| DSP_DOWNLOADED = 2 |
| }; |
| |
| /* retrieve parameters from hda format */ |
| #define get_hdafmt_chs(fmt) (fmt & 0xf) |
| #define get_hdafmt_bits(fmt) ((fmt >> 4) & 0x7) |
| #define get_hdafmt_rate(fmt) ((fmt >> 8) & 0x7f) |
| #define get_hdafmt_type(fmt) ((fmt >> 15) & 0x1) |
| |
| /* |
| * CA0132 specific |
| */ |
| |
| struct ca0132_spec { |
| const struct snd_kcontrol_new *mixers[5]; |
| unsigned int num_mixers; |
| const struct hda_verb *base_init_verbs; |
| const struct hda_verb *base_exit_verbs; |
| const struct hda_verb *chip_init_verbs; |
| const struct hda_verb *desktop_init_verbs; |
| struct hda_verb *spec_init_verbs; |
| struct auto_pin_cfg autocfg; |
| |
| /* Nodes configurations */ |
| struct hda_multi_out multiout; |
| hda_nid_t out_pins[AUTO_CFG_MAX_OUTS]; |
| hda_nid_t dacs[AUTO_CFG_MAX_OUTS]; |
| unsigned int num_outputs; |
| hda_nid_t input_pins[AUTO_PIN_LAST]; |
| hda_nid_t adcs[AUTO_PIN_LAST]; |
| hda_nid_t dig_out; |
| hda_nid_t dig_in; |
| unsigned int num_inputs; |
| hda_nid_t shared_mic_nid; |
| hda_nid_t shared_out_nid; |
| hda_nid_t unsol_tag_hp; |
| hda_nid_t unsol_tag_front_hp; /* for desktop ca0132 codecs */ |
| hda_nid_t unsol_tag_amic1; |
| |
| /* chip access */ |
| struct mutex chipio_mutex; /* chip access mutex */ |
| u32 curr_chip_addx; |
| |
| /* DSP download related */ |
| enum dsp_download_state dsp_state; |
| unsigned int dsp_stream_id; |
| unsigned int wait_scp; |
| unsigned int wait_scp_header; |
| unsigned int wait_num_data; |
| unsigned int scp_resp_header; |
| unsigned int scp_resp_data[4]; |
| unsigned int scp_resp_count; |
| bool startup_check_entered; |
| bool dsp_reload; |
| |
| /* mixer and effects related */ |
| unsigned char dmic_ctl; |
| int cur_out_type; |
| int cur_mic_type; |
| long vnode_lvol[VNODES_COUNT]; |
| long vnode_rvol[VNODES_COUNT]; |
| long vnode_lswitch[VNODES_COUNT]; |
| long vnode_rswitch[VNODES_COUNT]; |
| long effects_switch[EFFECTS_COUNT]; |
| long voicefx_val; |
| long cur_mic_boost; |
| /* ca0132_alt control related values */ |
| unsigned char in_enum_val; |
| unsigned char out_enum_val; |
| unsigned char mic_boost_enum_val; |
| unsigned char smart_volume_setting; |
| long fx_ctl_val[EFFECT_LEVEL_SLIDERS]; |
| long xbass_xover_freq; |
| long eq_preset_val; |
| unsigned int tlv[4]; |
| struct hda_vmaster_mute_hook vmaster_mute; |
| /* AE-5 Control values */ |
| unsigned char ae5_headphone_gain_val; |
| unsigned char ae5_filter_val; |
| /* ZxR Control Values */ |
| unsigned char zxr_gain_set; |
| |
| struct hda_codec *codec; |
| struct delayed_work unsol_hp_work; |
| int quirk; |
| |
| #ifdef ENABLE_TUNING_CONTROLS |
| long cur_ctl_vals[TUNING_CTLS_COUNT]; |
| #endif |
| /* |
| * The Recon3D, Sound Blaster Z, Sound Blaster ZxR, and Sound Blaster |
| * AE-5 all use PCI region 2 to toggle GPIO and other currently unknown |
| * things. |
| */ |
| bool use_pci_mmio; |
| void __iomem *mem_base; |
| |
| /* |
| * Whether or not to use the alt functions like alt_select_out, |
| * alt_select_in, etc. Only used on desktop codecs for now, because of |
| * surround sound support. |
| */ |
| bool use_alt_functions; |
| |
| /* |
| * Whether or not to use alt controls: volume effect sliders, EQ |
| * presets, smart volume presets, and new control names with FX prefix. |
| * Renames PlayEnhancement and CrystalVoice too. |
| */ |
| bool use_alt_controls; |
| }; |
| |
| /* |
| * CA0132 quirks table |
| */ |
| enum { |
| QUIRK_NONE, |
| QUIRK_ALIENWARE, |
| QUIRK_ALIENWARE_M17XR4, |
| QUIRK_SBZ, |
| QUIRK_ZXR, |
| QUIRK_ZXR_DBPRO, |
| QUIRK_R3DI, |
| QUIRK_R3D, |
| QUIRK_AE5, |
| }; |
| |
| #ifdef CONFIG_PCI |
| #define ca0132_quirk(spec) ((spec)->quirk) |
| #define ca0132_use_pci_mmio(spec) ((spec)->use_pci_mmio) |
| #define ca0132_use_alt_functions(spec) ((spec)->use_alt_functions) |
| #define ca0132_use_alt_controls(spec) ((spec)->use_alt_controls) |
| #else |
| #define ca0132_quirk(spec) ({ (void)(spec); QUIRK_NONE; }) |
| #define ca0132_use_alt_functions(spec) ({ (void)(spec); false; }) |
| #define ca0132_use_pci_mmio(spec) ({ (void)(spec); false; }) |
| #define ca0132_use_alt_controls(spec) ({ (void)(spec); false; }) |
| #endif |
| |
| static const struct hda_pintbl alienware_pincfgs[] = { |
| { 0x0b, 0x90170110 }, /* Builtin Speaker */ |
| { 0x0c, 0x411111f0 }, /* N/A */ |
| { 0x0d, 0x411111f0 }, /* N/A */ |
| { 0x0e, 0x411111f0 }, /* N/A */ |
| { 0x0f, 0x0321101f }, /* HP */ |
| { 0x10, 0x411111f0 }, /* Headset? disabled for now */ |
| { 0x11, 0x03a11021 }, /* Mic */ |
| { 0x12, 0xd5a30140 }, /* Builtin Mic */ |
| { 0x13, 0x411111f0 }, /* N/A */ |
| { 0x18, 0x411111f0 }, /* N/A */ |
| {} |
| }; |
| |
| /* Sound Blaster Z pin configs taken from Windows Driver */ |
| static const struct hda_pintbl sbz_pincfgs[] = { |
| { 0x0b, 0x01017010 }, /* Port G -- Lineout FRONT L/R */ |
| { 0x0c, 0x014510f0 }, /* SPDIF Out 1 */ |
| { 0x0d, 0x014510f0 }, /* Digital Out */ |
| { 0x0e, 0x01c510f0 }, /* SPDIF In */ |
| { 0x0f, 0x0221701f }, /* Port A -- BackPanel HP */ |
| { 0x10, 0x01017012 }, /* Port D -- Center/LFE or FP Hp */ |
| { 0x11, 0x01017014 }, /* Port B -- LineMicIn2 / Rear L/R */ |
| { 0x12, 0x01a170f0 }, /* Port C -- LineIn1 */ |
| { 0x13, 0x908700f0 }, /* What U Hear In*/ |
| { 0x18, 0x50d000f0 }, /* N/A */ |
| {} |
| }; |
| |
| /* Sound Blaster ZxR pin configs taken from Windows Driver */ |
| static const struct hda_pintbl zxr_pincfgs[] = { |
| { 0x0b, 0x01047110 }, /* Port G -- Lineout FRONT L/R */ |
| { 0x0c, 0x414510f0 }, /* SPDIF Out 1 - Disabled*/ |
| { 0x0d, 0x014510f0 }, /* Digital Out */ |
| { 0x0e, 0x41c520f0 }, /* SPDIF In - Disabled*/ |
| { 0x0f, 0x0122711f }, /* Port A -- BackPanel HP */ |
| { 0x10, 0x01017111 }, /* Port D -- Center/LFE */ |
| { 0x11, 0x01017114 }, /* Port B -- LineMicIn2 / Rear L/R */ |
| { 0x12, 0x01a271f0 }, /* Port C -- LineIn1 */ |
| { 0x13, 0x908700f0 }, /* What U Hear In*/ |
| { 0x18, 0x50d000f0 }, /* N/A */ |
| {} |
| }; |
| |
| /* Recon3D pin configs taken from Windows Driver */ |
| static const struct hda_pintbl r3d_pincfgs[] = { |
| { 0x0b, 0x01014110 }, /* Port G -- Lineout FRONT L/R */ |
| { 0x0c, 0x014510f0 }, /* SPDIF Out 1 */ |
| { 0x0d, 0x014510f0 }, /* Digital Out */ |
| { 0x0e, 0x01c520f0 }, /* SPDIF In */ |
| { 0x0f, 0x0221401f }, /* Port A -- BackPanel HP */ |
| { 0x10, 0x01016011 }, /* Port D -- Center/LFE or FP Hp */ |
| { 0x11, 0x01011014 }, /* Port B -- LineMicIn2 / Rear L/R */ |
| { 0x12, 0x02a090f0 }, /* Port C -- LineIn1 */ |
| { 0x13, 0x908700f0 }, /* What U Hear In*/ |
| { 0x18, 0x50d000f0 }, /* N/A */ |
| {} |
| }; |
| |
| /* Sound Blaster AE-5 pin configs taken from Windows Driver */ |
| static const struct hda_pintbl ae5_pincfgs[] = { |
| { 0x0b, 0x01017010 }, /* Port G -- Lineout FRONT L/R */ |
| { 0x0c, 0x014510f0 }, /* SPDIF Out 1 */ |
| { 0x0d, 0x014510f0 }, /* Digital Out */ |
| { 0x0e, 0x01c510f0 }, /* SPDIF In */ |
| { 0x0f, 0x01017114 }, /* Port A -- Rear L/R. */ |
| { 0x10, 0x01017012 }, /* Port D -- Center/LFE or FP Hp */ |
| { 0x11, 0x01a170ff }, /* Port B -- LineMicIn2 / Rear Headphone */ |
| { 0x12, 0x01a170f0 }, /* Port C -- LineIn1 */ |
| { 0x13, 0x908700f0 }, /* What U Hear In*/ |
| { 0x18, 0x50d000f0 }, /* N/A */ |
| {} |
| }; |
| |
| /* Recon3D integrated pin configs taken from Windows Driver */ |
| static const struct hda_pintbl r3di_pincfgs[] = { |
| { 0x0b, 0x01014110 }, /* Port G -- Lineout FRONT L/R */ |
| { 0x0c, 0x014510f0 }, /* SPDIF Out 1 */ |
| { 0x0d, 0x014510f0 }, /* Digital Out */ |
| { 0x0e, 0x41c520f0 }, /* SPDIF In */ |
| { 0x0f, 0x0221401f }, /* Port A -- BackPanel HP */ |
| { 0x10, 0x01016011 }, /* Port D -- Center/LFE or FP Hp */ |
| { 0x11, 0x01011014 }, /* Port B -- LineMicIn2 / Rear L/R */ |
| { 0x12, 0x02a090f0 }, /* Port C -- LineIn1 */ |
| { 0x13, 0x908700f0 }, /* What U Hear In*/ |
| { 0x18, 0x500000f0 }, /* N/A */ |
| {} |
| }; |
| |
| static const struct snd_pci_quirk ca0132_quirks[] = { |
| SND_PCI_QUIRK(0x1028, 0x057b, "Alienware M17x R4", QUIRK_ALIENWARE_M17XR4), |
| SND_PCI_QUIRK(0x1028, 0x0685, "Alienware 15 2015", QUIRK_ALIENWARE), |
| SND_PCI_QUIRK(0x1028, 0x0688, "Alienware 17 2015", QUIRK_ALIENWARE), |
| SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE), |
| SND_PCI_QUIRK(0x1102, 0x0010, "Sound Blaster Z", QUIRK_SBZ), |
| SND_PCI_QUIRK(0x1102, 0x0023, "Sound Blaster Z", QUIRK_SBZ), |
| SND_PCI_QUIRK(0x1102, 0x0027, "Sound Blaster Z", QUIRK_SBZ), |
| SND_PCI_QUIRK(0x1102, 0x0033, "Sound Blaster ZxR", QUIRK_SBZ), |
| SND_PCI_QUIRK(0x1458, 0xA016, "Recon3Di", QUIRK_R3DI), |
| SND_PCI_QUIRK(0x1458, 0xA026, "Gigabyte G1.Sniper Z97", QUIRK_R3DI), |
| SND_PCI_QUIRK(0x1458, 0xA036, "Gigabyte GA-Z170X-Gaming 7", QUIRK_R3DI), |
| SND_PCI_QUIRK(0x1102, 0x0013, "Recon3D", QUIRK_R3D), |
| SND_PCI_QUIRK(0x1102, 0x0051, "Sound Blaster AE-5", QUIRK_AE5), |
| {} |
| }; |
| |
| /* |
| * CA0132 codec access |
| */ |
| static unsigned int codec_send_command(struct hda_codec *codec, hda_nid_t nid, |
| unsigned int verb, unsigned int parm, unsigned int *res) |
| { |
| unsigned int response; |
| response = snd_hda_codec_read(codec, nid, 0, verb, parm); |
| *res = response; |
| |
| return ((response == -1) ? -1 : 0); |
| } |
| |
| static int codec_set_converter_format(struct hda_codec *codec, hda_nid_t nid, |
| unsigned short converter_format, unsigned int *res) |
| { |
| return codec_send_command(codec, nid, VENDOR_CHIPIO_STREAM_FORMAT, |
| converter_format & 0xffff, res); |
| } |
| |
| static int codec_set_converter_stream_channel(struct hda_codec *codec, |
| hda_nid_t nid, unsigned char stream, |
| unsigned char channel, unsigned int *res) |
| { |
| unsigned char converter_stream_channel = 0; |
| |
| converter_stream_channel = (stream << 4) | (channel & 0x0f); |
| return codec_send_command(codec, nid, AC_VERB_SET_CHANNEL_STREAMID, |
| converter_stream_channel, res); |
| } |
| |
| /* Chip access helper function */ |
| static int chipio_send(struct hda_codec *codec, |
| unsigned int reg, |
| unsigned int data) |
| { |
| unsigned int res; |
| unsigned long timeout = jiffies + msecs_to_jiffies(1000); |
| |
| /* send bits of data specified by reg */ |
| do { |
| res = snd_hda_codec_read(codec, WIDGET_CHIP_CTRL, 0, |
| reg, data); |
| if (res == VENDOR_STATUS_CHIPIO_OK) |
| return 0; |
| msleep(20); |
| } while (time_before(jiffies, timeout)); |
| |
| return -EIO; |
| } |
| |
| /* |
| * Write chip address through the vendor widget -- NOT protected by the Mutex! |
| */ |
| static int chipio_write_address(struct hda_codec *codec, |
| unsigned int chip_addx) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int res; |
| |
| if (spec->curr_chip_addx == chip_addx) |
| return 0; |
| |
| /* send low 16 bits of the address */ |
| res = chipio_send(codec, VENDOR_CHIPIO_ADDRESS_LOW, |
| chip_addx & 0xffff); |
| |
| if (res != -EIO) { |
| /* send high 16 bits of the address */ |
| res = chipio_send(codec, VENDOR_CHIPIO_ADDRESS_HIGH, |
| chip_addx >> 16); |
| } |
| |
| spec->curr_chip_addx = (res < 0) ? ~0U : chip_addx; |
| |
| return res; |
| } |
| |
| /* |
| * Write data through the vendor widget -- NOT protected by the Mutex! |
| */ |
| static int chipio_write_data(struct hda_codec *codec, unsigned int data) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int res; |
| |
| /* send low 16 bits of the data */ |
| res = chipio_send(codec, VENDOR_CHIPIO_DATA_LOW, data & 0xffff); |
| |
| if (res != -EIO) { |
| /* send high 16 bits of the data */ |
| res = chipio_send(codec, VENDOR_CHIPIO_DATA_HIGH, |
| data >> 16); |
| } |
| |
| /*If no error encountered, automatically increment the address |
| as per chip behaviour*/ |
| spec->curr_chip_addx = (res != -EIO) ? |
| (spec->curr_chip_addx + 4) : ~0U; |
| return res; |
| } |
| |
| /* |
| * Write multiple data through the vendor widget -- NOT protected by the Mutex! |
| */ |
| static int chipio_write_data_multiple(struct hda_codec *codec, |
| const u32 *data, |
| unsigned int count) |
| { |
| int status = 0; |
| |
| if (data == NULL) { |
| codec_dbg(codec, "chipio_write_data null ptr\n"); |
| return -EINVAL; |
| } |
| |
| while ((count-- != 0) && (status == 0)) |
| status = chipio_write_data(codec, *data++); |
| |
| return status; |
| } |
| |
| |
| /* |
| * Read data through the vendor widget -- NOT protected by the Mutex! |
| */ |
| static int chipio_read_data(struct hda_codec *codec, unsigned int *data) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int res; |
| |
| /* post read */ |
| res = chipio_send(codec, VENDOR_CHIPIO_HIC_POST_READ, 0); |
| |
| if (res != -EIO) { |
| /* read status */ |
| res = chipio_send(codec, VENDOR_CHIPIO_STATUS, 0); |
| } |
| |
| if (res != -EIO) { |
| /* read data */ |
| *data = snd_hda_codec_read(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_HIC_READ_DATA, |
| 0); |
| } |
| |
| /*If no error encountered, automatically increment the address |
| as per chip behaviour*/ |
| spec->curr_chip_addx = (res != -EIO) ? |
| (spec->curr_chip_addx + 4) : ~0U; |
| return res; |
| } |
| |
| /* |
| * Write given value to the given address through the chip I/O widget. |
| * protected by the Mutex |
| */ |
| static int chipio_write(struct hda_codec *codec, |
| unsigned int chip_addx, const unsigned int data) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int err; |
| |
| mutex_lock(&spec->chipio_mutex); |
| |
| /* write the address, and if successful proceed to write data */ |
| err = chipio_write_address(codec, chip_addx); |
| if (err < 0) |
| goto exit; |
| |
| err = chipio_write_data(codec, data); |
| if (err < 0) |
| goto exit; |
| |
| exit: |
| mutex_unlock(&spec->chipio_mutex); |
| return err; |
| } |
| |
| /* |
| * Write given value to the given address through the chip I/O widget. |
| * not protected by the Mutex |
| */ |
| static int chipio_write_no_mutex(struct hda_codec *codec, |
| unsigned int chip_addx, const unsigned int data) |
| { |
| int err; |
| |
| |
| /* write the address, and if successful proceed to write data */ |
| err = chipio_write_address(codec, chip_addx); |
| if (err < 0) |
| goto exit; |
| |
| err = chipio_write_data(codec, data); |
| if (err < 0) |
| goto exit; |
| |
| exit: |
| return err; |
| } |
| |
| /* |
| * Write multiple values to the given address through the chip I/O widget. |
| * protected by the Mutex |
| */ |
| static int chipio_write_multiple(struct hda_codec *codec, |
| u32 chip_addx, |
| const u32 *data, |
| unsigned int count) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int status; |
| |
| mutex_lock(&spec->chipio_mutex); |
| status = chipio_write_address(codec, chip_addx); |
| if (status < 0) |
| goto error; |
| |
| status = chipio_write_data_multiple(codec, data, count); |
| error: |
| mutex_unlock(&spec->chipio_mutex); |
| |
| return status; |
| } |
| |
| /* |
| * Read the given address through the chip I/O widget |
| * protected by the Mutex |
| */ |
| static int chipio_read(struct hda_codec *codec, |
| unsigned int chip_addx, unsigned int *data) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int err; |
| |
| mutex_lock(&spec->chipio_mutex); |
| |
| /* write the address, and if successful proceed to write data */ |
| err = chipio_write_address(codec, chip_addx); |
| if (err < 0) |
| goto exit; |
| |
| err = chipio_read_data(codec, data); |
| if (err < 0) |
| goto exit; |
| |
| exit: |
| mutex_unlock(&spec->chipio_mutex); |
| return err; |
| } |
| |
| /* |
| * Set chip control flags through the chip I/O widget. |
| */ |
| static void chipio_set_control_flag(struct hda_codec *codec, |
| enum control_flag_id flag_id, |
| bool flag_state) |
| { |
| unsigned int val; |
| unsigned int flag_bit; |
| |
| flag_bit = (flag_state ? 1 : 0); |
| val = (flag_bit << 7) | (flag_id); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_FLAG_SET, val); |
| } |
| |
| /* |
| * Set chip parameters through the chip I/O widget. |
| */ |
| static void chipio_set_control_param(struct hda_codec *codec, |
| enum control_param_id param_id, int param_val) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int val; |
| |
| if ((param_id < 32) && (param_val < 8)) { |
| val = (param_val << 5) | (param_id); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PARAM_SET, val); |
| } else { |
| mutex_lock(&spec->chipio_mutex); |
| if (chipio_send(codec, VENDOR_CHIPIO_STATUS, 0) == 0) { |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PARAM_EX_ID_SET, |
| param_id); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PARAM_EX_VALUE_SET, |
| param_val); |
| } |
| mutex_unlock(&spec->chipio_mutex); |
| } |
| } |
| |
| /* |
| * Set chip parameters through the chip I/O widget. NO MUTEX. |
| */ |
| static void chipio_set_control_param_no_mutex(struct hda_codec *codec, |
| enum control_param_id param_id, int param_val) |
| { |
| int val; |
| |
| if ((param_id < 32) && (param_val < 8)) { |
| val = (param_val << 5) | (param_id); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PARAM_SET, val); |
| } else { |
| if (chipio_send(codec, VENDOR_CHIPIO_STATUS, 0) == 0) { |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PARAM_EX_ID_SET, |
| param_id); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PARAM_EX_VALUE_SET, |
| param_val); |
| } |
| } |
| } |
| /* |
| * Connect stream to a source point, and then connect |
| * that source point to a destination point. |
| */ |
| static void chipio_set_stream_source_dest(struct hda_codec *codec, |
| int streamid, int source_point, int dest_point) |
| { |
| chipio_set_control_param_no_mutex(codec, |
| CONTROL_PARAM_STREAM_ID, streamid); |
| chipio_set_control_param_no_mutex(codec, |
| CONTROL_PARAM_STREAM_SOURCE_CONN_POINT, source_point); |
| chipio_set_control_param_no_mutex(codec, |
| CONTROL_PARAM_STREAM_DEST_CONN_POINT, dest_point); |
| } |
| |
| /* |
| * Set number of channels in the selected stream. |
| */ |
| static void chipio_set_stream_channels(struct hda_codec *codec, |
| int streamid, unsigned int channels) |
| { |
| chipio_set_control_param_no_mutex(codec, |
| CONTROL_PARAM_STREAM_ID, streamid); |
| chipio_set_control_param_no_mutex(codec, |
| CONTROL_PARAM_STREAMS_CHANNELS, channels); |
| } |
| |
| /* |
| * Enable/Disable audio stream. |
| */ |
| static void chipio_set_stream_control(struct hda_codec *codec, |
| int streamid, int enable) |
| { |
| chipio_set_control_param_no_mutex(codec, |
| CONTROL_PARAM_STREAM_ID, streamid); |
| chipio_set_control_param_no_mutex(codec, |
| CONTROL_PARAM_STREAM_CONTROL, enable); |
| } |
| |
| |
| /* |
| * Set sampling rate of the connection point. NO MUTEX. |
| */ |
| static void chipio_set_conn_rate_no_mutex(struct hda_codec *codec, |
| int connid, enum ca0132_sample_rate rate) |
| { |
| chipio_set_control_param_no_mutex(codec, |
| CONTROL_PARAM_CONN_POINT_ID, connid); |
| chipio_set_control_param_no_mutex(codec, |
| CONTROL_PARAM_CONN_POINT_SAMPLE_RATE, rate); |
| } |
| |
| /* |
| * Set sampling rate of the connection point. |
| */ |
| static void chipio_set_conn_rate(struct hda_codec *codec, |
| int connid, enum ca0132_sample_rate rate) |
| { |
| chipio_set_control_param(codec, CONTROL_PARAM_CONN_POINT_ID, connid); |
| chipio_set_control_param(codec, CONTROL_PARAM_CONN_POINT_SAMPLE_RATE, |
| rate); |
| } |
| |
| /* |
| * Writes to the 8051's internal address space directly instead of indirectly, |
| * giving access to the special function registers located at addresses |
| * 0x80-0xFF. |
| */ |
| static void chipio_8051_write_direct(struct hda_codec *codec, |
| unsigned int addr, unsigned int data) |
| { |
| unsigned int verb; |
| |
| verb = VENDOR_CHIPIO_8051_WRITE_DIRECT | data; |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, verb, addr); |
| } |
| |
| /* |
| * Enable clocks. |
| */ |
| static void chipio_enable_clocks(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| mutex_lock(&spec->chipio_mutex); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PLL_PMU_WRITE, 0xff); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 5); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PLL_PMU_WRITE, 0x0b); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 6); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PLL_PMU_WRITE, 0xff); |
| mutex_unlock(&spec->chipio_mutex); |
| } |
| |
| /* |
| * CA0132 DSP IO stuffs |
| */ |
| static int dspio_send(struct hda_codec *codec, unsigned int reg, |
| unsigned int data) |
| { |
| int res; |
| unsigned long timeout = jiffies + msecs_to_jiffies(1000); |
| |
| /* send bits of data specified by reg to dsp */ |
| do { |
| res = snd_hda_codec_read(codec, WIDGET_DSP_CTRL, 0, reg, data); |
| if ((res >= 0) && (res != VENDOR_STATUS_DSPIO_BUSY)) |
| return res; |
| msleep(20); |
| } while (time_before(jiffies, timeout)); |
| |
| return -EIO; |
| } |
| |
| /* |
| * Wait for DSP to be ready for commands |
| */ |
| static void dspio_write_wait(struct hda_codec *codec) |
| { |
| int status; |
| unsigned long timeout = jiffies + msecs_to_jiffies(1000); |
| |
| do { |
| status = snd_hda_codec_read(codec, WIDGET_DSP_CTRL, 0, |
| VENDOR_DSPIO_STATUS, 0); |
| if ((status == VENDOR_STATUS_DSPIO_OK) || |
| (status == VENDOR_STATUS_DSPIO_SCP_RESPONSE_QUEUE_EMPTY)) |
| break; |
| msleep(1); |
| } while (time_before(jiffies, timeout)); |
| } |
| |
| /* |
| * Write SCP data to DSP |
| */ |
| static int dspio_write(struct hda_codec *codec, unsigned int scp_data) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int status; |
| |
| dspio_write_wait(codec); |
| |
| mutex_lock(&spec->chipio_mutex); |
| status = dspio_send(codec, VENDOR_DSPIO_SCP_WRITE_DATA_LOW, |
| scp_data & 0xffff); |
| if (status < 0) |
| goto error; |
| |
| status = dspio_send(codec, VENDOR_DSPIO_SCP_WRITE_DATA_HIGH, |
| scp_data >> 16); |
| if (status < 0) |
| goto error; |
| |
| /* OK, now check if the write itself has executed*/ |
| status = snd_hda_codec_read(codec, WIDGET_DSP_CTRL, 0, |
| VENDOR_DSPIO_STATUS, 0); |
| error: |
| mutex_unlock(&spec->chipio_mutex); |
| |
| return (status == VENDOR_STATUS_DSPIO_SCP_COMMAND_QUEUE_FULL) ? |
| -EIO : 0; |
| } |
| |
| /* |
| * Write multiple SCP data to DSP |
| */ |
| static int dspio_write_multiple(struct hda_codec *codec, |
| unsigned int *buffer, unsigned int size) |
| { |
| int status = 0; |
| unsigned int count; |
| |
| if (buffer == NULL) |
| return -EINVAL; |
| |
| count = 0; |
| while (count < size) { |
| status = dspio_write(codec, *buffer++); |
| if (status != 0) |
| break; |
| count++; |
| } |
| |
| return status; |
| } |
| |
| static int dspio_read(struct hda_codec *codec, unsigned int *data) |
| { |
| int status; |
| |
| status = dspio_send(codec, VENDOR_DSPIO_SCP_POST_READ_DATA, 0); |
| if (status == -EIO) |
| return status; |
| |
| status = dspio_send(codec, VENDOR_DSPIO_STATUS, 0); |
| if (status == -EIO || |
| status == VENDOR_STATUS_DSPIO_SCP_RESPONSE_QUEUE_EMPTY) |
| return -EIO; |
| |
| *data = snd_hda_codec_read(codec, WIDGET_DSP_CTRL, 0, |
| VENDOR_DSPIO_SCP_READ_DATA, 0); |
| |
| return 0; |
| } |
| |
| static int dspio_read_multiple(struct hda_codec *codec, unsigned int *buffer, |
| unsigned int *buf_size, unsigned int size_count) |
| { |
| int status = 0; |
| unsigned int size = *buf_size; |
| unsigned int count; |
| unsigned int skip_count; |
| unsigned int dummy; |
| |
| if (buffer == NULL) |
| return -1; |
| |
| count = 0; |
| while (count < size && count < size_count) { |
| status = dspio_read(codec, buffer++); |
| if (status != 0) |
| break; |
| count++; |
| } |
| |
| skip_count = count; |
| if (status == 0) { |
| while (skip_count < size) { |
| status = dspio_read(codec, &dummy); |
| if (status != 0) |
| break; |
| skip_count++; |
| } |
| } |
| *buf_size = count; |
| |
| return status; |
| } |
| |
| /* |
| * Construct the SCP header using corresponding fields |
| */ |
| static inline unsigned int |
| make_scp_header(unsigned int target_id, unsigned int source_id, |
| unsigned int get_flag, unsigned int req, |
| unsigned int device_flag, unsigned int resp_flag, |
| unsigned int error_flag, unsigned int data_size) |
| { |
| unsigned int header = 0; |
| |
| header = (data_size & 0x1f) << 27; |
| header |= (error_flag & 0x01) << 26; |
| header |= (resp_flag & 0x01) << 25; |
| header |= (device_flag & 0x01) << 24; |
| header |= (req & 0x7f) << 17; |
| header |= (get_flag & 0x01) << 16; |
| header |= (source_id & 0xff) << 8; |
| header |= target_id & 0xff; |
| |
| return header; |
| } |
| |
| /* |
| * Extract corresponding fields from SCP header |
| */ |
| static inline void |
| extract_scp_header(unsigned int header, |
| unsigned int *target_id, unsigned int *source_id, |
| unsigned int *get_flag, unsigned int *req, |
| unsigned int *device_flag, unsigned int *resp_flag, |
| unsigned int *error_flag, unsigned int *data_size) |
| { |
| if (data_size) |
| *data_size = (header >> 27) & 0x1f; |
| if (error_flag) |
| *error_flag = (header >> 26) & 0x01; |
| if (resp_flag) |
| *resp_flag = (header >> 25) & 0x01; |
| if (device_flag) |
| *device_flag = (header >> 24) & 0x01; |
| if (req) |
| *req = (header >> 17) & 0x7f; |
| if (get_flag) |
| *get_flag = (header >> 16) & 0x01; |
| if (source_id) |
| *source_id = (header >> 8) & 0xff; |
| if (target_id) |
| *target_id = header & 0xff; |
| } |
| |
| #define SCP_MAX_DATA_WORDS (16) |
| |
| /* Structure to contain any SCP message */ |
| struct scp_msg { |
| unsigned int hdr; |
| unsigned int data[SCP_MAX_DATA_WORDS]; |
| }; |
| |
| static void dspio_clear_response_queue(struct hda_codec *codec) |
| { |
| unsigned int dummy = 0; |
| int status = -1; |
| |
| /* clear all from the response queue */ |
| do { |
| status = dspio_read(codec, &dummy); |
| } while (status == 0); |
| } |
| |
| static int dspio_get_response_data(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int data = 0; |
| unsigned int count; |
| |
| if (dspio_read(codec, &data) < 0) |
| return -EIO; |
| |
| if ((data & 0x00ffffff) == spec->wait_scp_header) { |
| spec->scp_resp_header = data; |
| spec->scp_resp_count = data >> 27; |
| count = spec->wait_num_data; |
| dspio_read_multiple(codec, spec->scp_resp_data, |
| &spec->scp_resp_count, count); |
| return 0; |
| } |
| |
| return -EIO; |
| } |
| |
| /* |
| * Send SCP message to DSP |
| */ |
| static int dspio_send_scp_message(struct hda_codec *codec, |
| unsigned char *send_buf, |
| unsigned int send_buf_size, |
| unsigned char *return_buf, |
| unsigned int return_buf_size, |
| unsigned int *bytes_returned) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int status = -1; |
| unsigned int scp_send_size = 0; |
| unsigned int total_size; |
| bool waiting_for_resp = false; |
| unsigned int header; |
| struct scp_msg *ret_msg; |
| unsigned int resp_src_id, resp_target_id; |
| unsigned int data_size, src_id, target_id, get_flag, device_flag; |
| |
| if (bytes_returned) |
| *bytes_returned = 0; |
| |
| /* get scp header from buffer */ |
| header = *((unsigned int *)send_buf); |
| extract_scp_header(header, &target_id, &src_id, &get_flag, NULL, |
| &device_flag, NULL, NULL, &data_size); |
| scp_send_size = data_size + 1; |
| total_size = (scp_send_size * 4); |
| |
| if (send_buf_size < total_size) |
| return -EINVAL; |
| |
| if (get_flag || device_flag) { |
| if (!return_buf || return_buf_size < 4 || !bytes_returned) |
| return -EINVAL; |
| |
| spec->wait_scp_header = *((unsigned int *)send_buf); |
| |
| /* swap source id with target id */ |
| resp_target_id = src_id; |
| resp_src_id = target_id; |
| spec->wait_scp_header &= 0xffff0000; |
| spec->wait_scp_header |= (resp_src_id << 8) | (resp_target_id); |
| spec->wait_num_data = return_buf_size/sizeof(unsigned int) - 1; |
| spec->wait_scp = 1; |
| waiting_for_resp = true; |
| } |
| |
| status = dspio_write_multiple(codec, (unsigned int *)send_buf, |
| scp_send_size); |
| if (status < 0) { |
| spec->wait_scp = 0; |
| return status; |
| } |
| |
| if (waiting_for_resp) { |
| unsigned long timeout = jiffies + msecs_to_jiffies(1000); |
| memset(return_buf, 0, return_buf_size); |
| do { |
| msleep(20); |
| } while (spec->wait_scp && time_before(jiffies, timeout)); |
| waiting_for_resp = false; |
| if (!spec->wait_scp) { |
| ret_msg = (struct scp_msg *)return_buf; |
| memcpy(&ret_msg->hdr, &spec->scp_resp_header, 4); |
| memcpy(&ret_msg->data, spec->scp_resp_data, |
| spec->wait_num_data); |
| *bytes_returned = (spec->scp_resp_count + 1) * 4; |
| status = 0; |
| } else { |
| status = -EIO; |
| } |
| spec->wait_scp = 0; |
| } |
| |
| return status; |
| } |
| |
| /** |
| * Prepare and send the SCP message to DSP |
| * @codec: the HDA codec |
| * @mod_id: ID of the DSP module to send the command |
| * @req: ID of request to send to the DSP module |
| * @dir: SET or GET |
| * @data: pointer to the data to send with the request, request specific |
| * @len: length of the data, in bytes |
| * @reply: point to the buffer to hold data returned for a reply |
| * @reply_len: length of the reply buffer returned from GET |
| * |
| * Returns zero or a negative error code. |
| */ |
| static int dspio_scp(struct hda_codec *codec, |
| int mod_id, int src_id, int req, int dir, const void *data, |
| unsigned int len, void *reply, unsigned int *reply_len) |
| { |
| int status = 0; |
| struct scp_msg scp_send, scp_reply; |
| unsigned int ret_bytes, send_size, ret_size; |
| unsigned int send_get_flag, reply_resp_flag, reply_error_flag; |
| unsigned int reply_data_size; |
| |
| memset(&scp_send, 0, sizeof(scp_send)); |
| memset(&scp_reply, 0, sizeof(scp_reply)); |
| |
| if ((len != 0 && data == NULL) || (len > SCP_MAX_DATA_WORDS)) |
| return -EINVAL; |
| |
| if (dir == SCP_GET && reply == NULL) { |
| codec_dbg(codec, "dspio_scp get but has no buffer\n"); |
| return -EINVAL; |
| } |
| |
| if (reply != NULL && (reply_len == NULL || (*reply_len == 0))) { |
| codec_dbg(codec, "dspio_scp bad resp buf len parms\n"); |
| return -EINVAL; |
| } |
| |
| scp_send.hdr = make_scp_header(mod_id, src_id, (dir == SCP_GET), req, |
| 0, 0, 0, len/sizeof(unsigned int)); |
| if (data != NULL && len > 0) { |
| len = min((unsigned int)(sizeof(scp_send.data)), len); |
| memcpy(scp_send.data, data, len); |
| } |
| |
| ret_bytes = 0; |
| send_size = sizeof(unsigned int) + len; |
| status = dspio_send_scp_message(codec, (unsigned char *)&scp_send, |
| send_size, (unsigned char *)&scp_reply, |
| sizeof(scp_reply), &ret_bytes); |
| |
| if (status < 0) { |
| codec_dbg(codec, "dspio_scp: send scp msg failed\n"); |
| return status; |
| } |
| |
| /* extract send and reply headers members */ |
| extract_scp_header(scp_send.hdr, NULL, NULL, &send_get_flag, |
| NULL, NULL, NULL, NULL, NULL); |
| extract_scp_header(scp_reply.hdr, NULL, NULL, NULL, NULL, NULL, |
| &reply_resp_flag, &reply_error_flag, |
| &reply_data_size); |
| |
| if (!send_get_flag) |
| return 0; |
| |
| if (reply_resp_flag && !reply_error_flag) { |
| ret_size = (ret_bytes - sizeof(scp_reply.hdr)) |
| / sizeof(unsigned int); |
| |
| if (*reply_len < ret_size*sizeof(unsigned int)) { |
| codec_dbg(codec, "reply too long for buf\n"); |
| return -EINVAL; |
| } else if (ret_size != reply_data_size) { |
| codec_dbg(codec, "RetLen and HdrLen .NE.\n"); |
| return -EINVAL; |
| } else if (!reply) { |
| codec_dbg(codec, "NULL reply\n"); |
| return -EINVAL; |
| } else { |
| *reply_len = ret_size*sizeof(unsigned int); |
| memcpy(reply, scp_reply.data, *reply_len); |
| } |
| } else { |
| codec_dbg(codec, "reply ill-formed or errflag set\n"); |
| return -EIO; |
| } |
| |
| return status; |
| } |
| |
| /* |
| * Set DSP parameters |
| */ |
| static int dspio_set_param(struct hda_codec *codec, int mod_id, |
| int src_id, int req, const void *data, unsigned int len) |
| { |
| return dspio_scp(codec, mod_id, src_id, req, SCP_SET, data, len, NULL, |
| NULL); |
| } |
| |
| static int dspio_set_uint_param(struct hda_codec *codec, int mod_id, |
| int req, const unsigned int data) |
| { |
| return dspio_set_param(codec, mod_id, 0x20, req, &data, |
| sizeof(unsigned int)); |
| } |
| |
| static int dspio_set_uint_param_no_source(struct hda_codec *codec, int mod_id, |
| int req, const unsigned int data) |
| { |
| return dspio_set_param(codec, mod_id, 0x00, req, &data, |
| sizeof(unsigned int)); |
| } |
| |
| /* |
| * Allocate a DSP DMA channel via an SCP message |
| */ |
| static int dspio_alloc_dma_chan(struct hda_codec *codec, unsigned int *dma_chan) |
| { |
| int status = 0; |
| unsigned int size = sizeof(dma_chan); |
| |
| codec_dbg(codec, " dspio_alloc_dma_chan() -- begin\n"); |
| status = dspio_scp(codec, MASTERCONTROL, 0x20, |
| MASTERCONTROL_ALLOC_DMA_CHAN, SCP_GET, NULL, 0, |
| dma_chan, &size); |
| |
| if (status < 0) { |
| codec_dbg(codec, "dspio_alloc_dma_chan: SCP Failed\n"); |
| return status; |
| } |
| |
| if ((*dma_chan + 1) == 0) { |
| codec_dbg(codec, "no free dma channels to allocate\n"); |
| return -EBUSY; |
| } |
| |
| codec_dbg(codec, "dspio_alloc_dma_chan: chan=%d\n", *dma_chan); |
| codec_dbg(codec, " dspio_alloc_dma_chan() -- complete\n"); |
| |
| return status; |
| } |
| |
| /* |
| * Free a DSP DMA via an SCP message |
| */ |
| static int dspio_free_dma_chan(struct hda_codec *codec, unsigned int dma_chan) |
| { |
| int status = 0; |
| unsigned int dummy = 0; |
| |
| codec_dbg(codec, " dspio_free_dma_chan() -- begin\n"); |
| codec_dbg(codec, "dspio_free_dma_chan: chan=%d\n", dma_chan); |
| |
| status = dspio_scp(codec, MASTERCONTROL, 0x20, |
| MASTERCONTROL_ALLOC_DMA_CHAN, SCP_SET, &dma_chan, |
| sizeof(dma_chan), NULL, &dummy); |
| |
| if (status < 0) { |
| codec_dbg(codec, "dspio_free_dma_chan: SCP Failed\n"); |
| return status; |
| } |
| |
| codec_dbg(codec, " dspio_free_dma_chan() -- complete\n"); |
| |
| return status; |
| } |
| |
| /* |
| * (Re)start the DSP |
| */ |
| static int dsp_set_run_state(struct hda_codec *codec) |
| { |
| unsigned int dbg_ctrl_reg; |
| unsigned int halt_state; |
| int err; |
| |
| err = chipio_read(codec, DSP_DBGCNTL_INST_OFFSET, &dbg_ctrl_reg); |
| if (err < 0) |
| return err; |
| |
| halt_state = (dbg_ctrl_reg & DSP_DBGCNTL_STATE_MASK) >> |
| DSP_DBGCNTL_STATE_LOBIT; |
| |
| if (halt_state != 0) { |
| dbg_ctrl_reg &= ~((halt_state << DSP_DBGCNTL_SS_LOBIT) & |
| DSP_DBGCNTL_SS_MASK); |
| err = chipio_write(codec, DSP_DBGCNTL_INST_OFFSET, |
| dbg_ctrl_reg); |
| if (err < 0) |
| return err; |
| |
| dbg_ctrl_reg |= (halt_state << DSP_DBGCNTL_EXEC_LOBIT) & |
| DSP_DBGCNTL_EXEC_MASK; |
| err = chipio_write(codec, DSP_DBGCNTL_INST_OFFSET, |
| dbg_ctrl_reg); |
| if (err < 0) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Reset the DSP |
| */ |
| static int dsp_reset(struct hda_codec *codec) |
| { |
| unsigned int res; |
| int retry = 20; |
| |
| codec_dbg(codec, "dsp_reset\n"); |
| do { |
| res = dspio_send(codec, VENDOR_DSPIO_DSP_INIT, 0); |
| retry--; |
| } while (res == -EIO && retry); |
| |
| if (!retry) { |
| codec_dbg(codec, "dsp_reset timeout\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Convert chip address to DSP address |
| */ |
| static unsigned int dsp_chip_to_dsp_addx(unsigned int chip_addx, |
| bool *code, bool *yram) |
| { |
| *code = *yram = false; |
| |
| if (UC_RANGE(chip_addx, 1)) { |
| *code = true; |
| return UC_OFF(chip_addx); |
| } else if (X_RANGE_ALL(chip_addx, 1)) { |
| return X_OFF(chip_addx); |
| } else if (Y_RANGE_ALL(chip_addx, 1)) { |
| *yram = true; |
| return Y_OFF(chip_addx); |
| } |
| |
| return INVALID_CHIP_ADDRESS; |
| } |
| |
| /* |
| * Check if the DSP DMA is active |
| */ |
| static bool dsp_is_dma_active(struct hda_codec *codec, unsigned int dma_chan) |
| { |
| unsigned int dma_chnlstart_reg; |
| |
| chipio_read(codec, DSPDMAC_CHNLSTART_INST_OFFSET, &dma_chnlstart_reg); |
| |
| return ((dma_chnlstart_reg & (1 << |
| (DSPDMAC_CHNLSTART_EN_LOBIT + dma_chan))) != 0); |
| } |
| |
| static int dsp_dma_setup_common(struct hda_codec *codec, |
| unsigned int chip_addx, |
| unsigned int dma_chan, |
| unsigned int port_map_mask, |
| bool ovly) |
| { |
| int status = 0; |
| unsigned int chnl_prop; |
| unsigned int dsp_addx; |
| unsigned int active; |
| bool code, yram; |
| |
| codec_dbg(codec, "-- dsp_dma_setup_common() -- Begin ---------\n"); |
| |
| if (dma_chan >= DSPDMAC_DMA_CFG_CHANNEL_COUNT) { |
| codec_dbg(codec, "dma chan num invalid\n"); |
| return -EINVAL; |
| } |
| |
| if (dsp_is_dma_active(codec, dma_chan)) { |
| codec_dbg(codec, "dma already active\n"); |
| return -EBUSY; |
| } |
| |
| dsp_addx = dsp_chip_to_dsp_addx(chip_addx, &code, &yram); |
| |
| if (dsp_addx == INVALID_CHIP_ADDRESS) { |
| codec_dbg(codec, "invalid chip addr\n"); |
| return -ENXIO; |
| } |
| |
| chnl_prop = DSPDMAC_CHNLPROP_AC_MASK; |
| active = 0; |
| |
| codec_dbg(codec, " dsp_dma_setup_common() start reg pgm\n"); |
| |
| if (ovly) { |
| status = chipio_read(codec, DSPDMAC_CHNLPROP_INST_OFFSET, |
| &chnl_prop); |
| |
| if (status < 0) { |
| codec_dbg(codec, "read CHNLPROP Reg fail\n"); |
| return status; |
| } |
| codec_dbg(codec, "dsp_dma_setup_common() Read CHNLPROP\n"); |
| } |
| |
| if (!code) |
| chnl_prop &= ~(1 << (DSPDMAC_CHNLPROP_MSPCE_LOBIT + dma_chan)); |
| else |
| chnl_prop |= (1 << (DSPDMAC_CHNLPROP_MSPCE_LOBIT + dma_chan)); |
| |
| chnl_prop &= ~(1 << (DSPDMAC_CHNLPROP_DCON_LOBIT + dma_chan)); |
| |
| status = chipio_write(codec, DSPDMAC_CHNLPROP_INST_OFFSET, chnl_prop); |
| if (status < 0) { |
| codec_dbg(codec, "write CHNLPROP Reg fail\n"); |
| return status; |
| } |
| codec_dbg(codec, " dsp_dma_setup_common() Write CHNLPROP\n"); |
| |
| if (ovly) { |
| status = chipio_read(codec, DSPDMAC_ACTIVE_INST_OFFSET, |
| &active); |
| |
| if (status < 0) { |
| codec_dbg(codec, "read ACTIVE Reg fail\n"); |
| return status; |
| } |
| codec_dbg(codec, "dsp_dma_setup_common() Read ACTIVE\n"); |
| } |
| |
| active &= (~(1 << (DSPDMAC_ACTIVE_AAR_LOBIT + dma_chan))) & |
| DSPDMAC_ACTIVE_AAR_MASK; |
| |
| status = chipio_write(codec, DSPDMAC_ACTIVE_INST_OFFSET, active); |
| if (status < 0) { |
| codec_dbg(codec, "write ACTIVE Reg fail\n"); |
| return status; |
| } |
| |
| codec_dbg(codec, " dsp_dma_setup_common() Write ACTIVE\n"); |
| |
| status = chipio_write(codec, DSPDMAC_AUDCHSEL_INST_OFFSET(dma_chan), |
| port_map_mask); |
| if (status < 0) { |
| codec_dbg(codec, "write AUDCHSEL Reg fail\n"); |
| return status; |
| } |
| codec_dbg(codec, " dsp_dma_setup_common() Write AUDCHSEL\n"); |
| |
| status = chipio_write(codec, DSPDMAC_IRQCNT_INST_OFFSET(dma_chan), |
| DSPDMAC_IRQCNT_BICNT_MASK | DSPDMAC_IRQCNT_CICNT_MASK); |
| if (status < 0) { |
| codec_dbg(codec, "write IRQCNT Reg fail\n"); |
| return status; |
| } |
| codec_dbg(codec, " dsp_dma_setup_common() Write IRQCNT\n"); |
| |
| codec_dbg(codec, |
| "ChipA=0x%x,DspA=0x%x,dmaCh=%u, " |
| "CHSEL=0x%x,CHPROP=0x%x,Active=0x%x\n", |
| chip_addx, dsp_addx, dma_chan, |
| port_map_mask, chnl_prop, active); |
| |
| codec_dbg(codec, "-- dsp_dma_setup_common() -- Complete ------\n"); |
| |
| return 0; |
| } |
| |
| /* |
| * Setup the DSP DMA per-transfer-specific registers |
| */ |
| static int dsp_dma_setup(struct hda_codec *codec, |
| unsigned int chip_addx, |
| unsigned int count, |
| unsigned int dma_chan) |
| { |
| int status = 0; |
| bool code, yram; |
| unsigned int dsp_addx; |
| unsigned int addr_field; |
| unsigned int incr_field; |
| unsigned int base_cnt; |
| unsigned int cur_cnt; |
| unsigned int dma_cfg = 0; |
| unsigned int adr_ofs = 0; |
| unsigned int xfr_cnt = 0; |
| const unsigned int max_dma_count = 1 << (DSPDMAC_XFRCNT_BCNT_HIBIT - |
| DSPDMAC_XFRCNT_BCNT_LOBIT + 1); |
| |
| codec_dbg(codec, "-- dsp_dma_setup() -- Begin ---------\n"); |
| |
| if (count > max_dma_count) { |
| codec_dbg(codec, "count too big\n"); |
| return -EINVAL; |
| } |
| |
| dsp_addx = dsp_chip_to_dsp_addx(chip_addx, &code, &yram); |
| if (dsp_addx == INVALID_CHIP_ADDRESS) { |
| codec_dbg(codec, "invalid chip addr\n"); |
| return -ENXIO; |
| } |
| |
| codec_dbg(codec, " dsp_dma_setup() start reg pgm\n"); |
| |
| addr_field = dsp_addx << DSPDMAC_DMACFG_DBADR_LOBIT; |
| incr_field = 0; |
| |
| if (!code) { |
| addr_field <<= 1; |
| if (yram) |
| addr_field |= (1 << DSPDMAC_DMACFG_DBADR_LOBIT); |
| |
| incr_field = (1 << DSPDMAC_DMACFG_AINCR_LOBIT); |
| } |
| |
| dma_cfg = addr_field + incr_field; |
| status = chipio_write(codec, DSPDMAC_DMACFG_INST_OFFSET(dma_chan), |
| dma_cfg); |
| if (status < 0) { |
| codec_dbg(codec, "write DMACFG Reg fail\n"); |
| return status; |
| } |
| codec_dbg(codec, " dsp_dma_setup() Write DMACFG\n"); |
| |
| adr_ofs = (count - 1) << (DSPDMAC_DSPADROFS_BOFS_LOBIT + |
| (code ? 0 : 1)); |
| |
| status = chipio_write(codec, DSPDMAC_DSPADROFS_INST_OFFSET(dma_chan), |
| adr_ofs); |
| if (status < 0) { |
| codec_dbg(codec, "write DSPADROFS Reg fail\n"); |
| return status; |
| } |
| codec_dbg(codec, " dsp_dma_setup() Write DSPADROFS\n"); |
| |
| base_cnt = (count - 1) << DSPDMAC_XFRCNT_BCNT_LOBIT; |
| |
| cur_cnt = (count - 1) << DSPDMAC_XFRCNT_CCNT_LOBIT; |
| |
| xfr_cnt = base_cnt | cur_cnt; |
| |
| status = chipio_write(codec, |
| DSPDMAC_XFRCNT_INST_OFFSET(dma_chan), xfr_cnt); |
| if (status < 0) { |
| codec_dbg(codec, "write XFRCNT Reg fail\n"); |
| return status; |
| } |
| codec_dbg(codec, " dsp_dma_setup() Write XFRCNT\n"); |
| |
| codec_dbg(codec, |
| "ChipA=0x%x, cnt=0x%x, DMACFG=0x%x, " |
| "ADROFS=0x%x, XFRCNT=0x%x\n", |
| chip_addx, count, dma_cfg, adr_ofs, xfr_cnt); |
| |
| codec_dbg(codec, "-- dsp_dma_setup() -- Complete ---------\n"); |
| |
| return 0; |
| } |
| |
| /* |
| * Start the DSP DMA |
| */ |
| static int dsp_dma_start(struct hda_codec *codec, |
| unsigned int dma_chan, bool ovly) |
| { |
| unsigned int reg = 0; |
| int status = 0; |
| |
| codec_dbg(codec, "-- dsp_dma_start() -- Begin ---------\n"); |
| |
| if (ovly) { |
| status = chipio_read(codec, |
| DSPDMAC_CHNLSTART_INST_OFFSET, ®); |
| |
| if (status < 0) { |
| codec_dbg(codec, "read CHNLSTART reg fail\n"); |
| return status; |
| } |
| codec_dbg(codec, "-- dsp_dma_start() Read CHNLSTART\n"); |
| |
| reg &= ~(DSPDMAC_CHNLSTART_EN_MASK | |
| DSPDMAC_CHNLSTART_DIS_MASK); |
| } |
| |
| status = chipio_write(codec, DSPDMAC_CHNLSTART_INST_OFFSET, |
| reg | (1 << (dma_chan + DSPDMAC_CHNLSTART_EN_LOBIT))); |
| if (status < 0) { |
| codec_dbg(codec, "write CHNLSTART reg fail\n"); |
| return status; |
| } |
| codec_dbg(codec, "-- dsp_dma_start() -- Complete ---------\n"); |
| |
| return status; |
| } |
| |
| /* |
| * Stop the DSP DMA |
| */ |
| static int dsp_dma_stop(struct hda_codec *codec, |
| unsigned int dma_chan, bool ovly) |
| { |
| unsigned int reg = 0; |
| int status = 0; |
| |
| codec_dbg(codec, "-- dsp_dma_stop() -- Begin ---------\n"); |
| |
| if (ovly) { |
| status = chipio_read(codec, |
| DSPDMAC_CHNLSTART_INST_OFFSET, ®); |
| |
| if (status < 0) { |
| codec_dbg(codec, "read CHNLSTART reg fail\n"); |
| return status; |
| } |
| codec_dbg(codec, "-- dsp_dma_stop() Read CHNLSTART\n"); |
| reg &= ~(DSPDMAC_CHNLSTART_EN_MASK | |
| DSPDMAC_CHNLSTART_DIS_MASK); |
| } |
| |
| status = chipio_write(codec, DSPDMAC_CHNLSTART_INST_OFFSET, |
| reg | (1 << (dma_chan + DSPDMAC_CHNLSTART_DIS_LOBIT))); |
| if (status < 0) { |
| codec_dbg(codec, "write CHNLSTART reg fail\n"); |
| return status; |
| } |
| codec_dbg(codec, "-- dsp_dma_stop() -- Complete ---------\n"); |
| |
| return status; |
| } |
| |
| /** |
| * Allocate router ports |
| * |
| * @codec: the HDA codec |
| * @num_chans: number of channels in the stream |
| * @ports_per_channel: number of ports per channel |
| * @start_device: start device |
| * @port_map: pointer to the port list to hold the allocated ports |
| * |
| * Returns zero or a negative error code. |
| */ |
| static int dsp_allocate_router_ports(struct hda_codec *codec, |
| unsigned int num_chans, |
| unsigned int ports_per_channel, |
| unsigned int start_device, |
| unsigned int *port_map) |
| { |
| int status = 0; |
| int res; |
| u8 val; |
| |
| status = chipio_send(codec, VENDOR_CHIPIO_STATUS, 0); |
| if (status < 0) |
| return status; |
| |
| val = start_device << 6; |
| val |= (ports_per_channel - 1) << 4; |
| val |= num_chans - 1; |
| |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PORT_ALLOC_CONFIG_SET, |
| val); |
| |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PORT_ALLOC_SET, |
| MEM_CONNID_DSP); |
| |
| status = chipio_send(codec, VENDOR_CHIPIO_STATUS, 0); |
| if (status < 0) |
| return status; |
| |
| res = snd_hda_codec_read(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PORT_ALLOC_GET, 0); |
| |
| *port_map = res; |
| |
| return (res < 0) ? res : 0; |
| } |
| |
| /* |
| * Free router ports |
| */ |
| static int dsp_free_router_ports(struct hda_codec *codec) |
| { |
| int status = 0; |
| |
| status = chipio_send(codec, VENDOR_CHIPIO_STATUS, 0); |
| if (status < 0) |
| return status; |
| |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PORT_FREE_SET, |
| MEM_CONNID_DSP); |
| |
| status = chipio_send(codec, VENDOR_CHIPIO_STATUS, 0); |
| |
| return status; |
| } |
| |
| /* |
| * Allocate DSP ports for the download stream |
| */ |
| static int dsp_allocate_ports(struct hda_codec *codec, |
| unsigned int num_chans, |
| unsigned int rate_multi, unsigned int *port_map) |
| { |
| int status; |
| |
| codec_dbg(codec, " dsp_allocate_ports() -- begin\n"); |
| |
| if ((rate_multi != 1) && (rate_multi != 2) && (rate_multi != 4)) { |
| codec_dbg(codec, "bad rate multiple\n"); |
| return -EINVAL; |
| } |
| |
| status = dsp_allocate_router_ports(codec, num_chans, |
| rate_multi, 0, port_map); |
| |
| codec_dbg(codec, " dsp_allocate_ports() -- complete\n"); |
| |
| return status; |
| } |
| |
| static int dsp_allocate_ports_format(struct hda_codec *codec, |
| const unsigned short fmt, |
| unsigned int *port_map) |
| { |
| int status; |
| unsigned int num_chans; |
| |
| unsigned int sample_rate_div = ((get_hdafmt_rate(fmt) >> 0) & 3) + 1; |
| unsigned int sample_rate_mul = ((get_hdafmt_rate(fmt) >> 3) & 3) + 1; |
| unsigned int rate_multi = sample_rate_mul / sample_rate_div; |
| |
| if ((rate_multi != 1) && (rate_multi != 2) && (rate_multi != 4)) { |
| codec_dbg(codec, "bad rate multiple\n"); |
| return -EINVAL; |
| } |
| |
| num_chans = get_hdafmt_chs(fmt) + 1; |
| |
| status = dsp_allocate_ports(codec, num_chans, rate_multi, port_map); |
| |
| return status; |
| } |
| |
| /* |
| * free DSP ports |
| */ |
| static int dsp_free_ports(struct hda_codec *codec) |
| { |
| int status; |
| |
| codec_dbg(codec, " dsp_free_ports() -- begin\n"); |
| |
| status = dsp_free_router_ports(codec); |
| if (status < 0) { |
| codec_dbg(codec, "free router ports fail\n"); |
| return status; |
| } |
| codec_dbg(codec, " dsp_free_ports() -- complete\n"); |
| |
| return status; |
| } |
| |
| /* |
| * HDA DMA engine stuffs for DSP code download |
| */ |
| struct dma_engine { |
| struct hda_codec *codec; |
| unsigned short m_converter_format; |
| struct snd_dma_buffer *dmab; |
| unsigned int buf_size; |
| }; |
| |
| |
| enum dma_state { |
| DMA_STATE_STOP = 0, |
| DMA_STATE_RUN = 1 |
| }; |
| |
| static int dma_convert_to_hda_format(struct hda_codec *codec, |
| unsigned int sample_rate, |
| unsigned short channels, |
| unsigned short *hda_format) |
| { |
| unsigned int format_val; |
| |
| format_val = snd_hdac_calc_stream_format(sample_rate, |
| channels, SNDRV_PCM_FORMAT_S32_LE, 32, 0); |
| |
| if (hda_format) |
| *hda_format = (unsigned short)format_val; |
| |
| return 0; |
| } |
| |
| /* |
| * Reset DMA for DSP download |
| */ |
| static int dma_reset(struct dma_engine *dma) |
| { |
| struct hda_codec *codec = dma->codec; |
| struct ca0132_spec *spec = codec->spec; |
| int status; |
| |
| if (dma->dmab->area) |
| snd_hda_codec_load_dsp_cleanup(codec, dma->dmab); |
| |
| status = snd_hda_codec_load_dsp_prepare(codec, |
| dma->m_converter_format, |
| dma->buf_size, |
| dma->dmab); |
| if (status < 0) |
| return status; |
| spec->dsp_stream_id = status; |
| return 0; |
| } |
| |
| static int dma_set_state(struct dma_engine *dma, enum dma_state state) |
| { |
| bool cmd; |
| |
| switch (state) { |
| case DMA_STATE_STOP: |
| cmd = false; |
| break; |
| case DMA_STATE_RUN: |
| cmd = true; |
| break; |
| default: |
| return 0; |
| } |
| |
| snd_hda_codec_load_dsp_trigger(dma->codec, cmd); |
| return 0; |
| } |
| |
| static unsigned int dma_get_buffer_size(struct dma_engine *dma) |
| { |
| return dma->dmab->bytes; |
| } |
| |
| static unsigned char *dma_get_buffer_addr(struct dma_engine *dma) |
| { |
| return dma->dmab->area; |
| } |
| |
| static int dma_xfer(struct dma_engine *dma, |
| const unsigned int *data, |
| unsigned int count) |
| { |
| memcpy(dma->dmab->area, data, count); |
| return 0; |
| } |
| |
| static void dma_get_converter_format( |
| struct dma_engine *dma, |
| unsigned short *format) |
| { |
| if (format) |
| *format = dma->m_converter_format; |
| } |
| |
| static unsigned int dma_get_stream_id(struct dma_engine *dma) |
| { |
| struct ca0132_spec *spec = dma->codec->spec; |
| |
| return spec->dsp_stream_id; |
| } |
| |
| struct dsp_image_seg { |
| u32 magic; |
| u32 chip_addr; |
| u32 count; |
| u32 data[0]; |
| }; |
| |
| static const u32 g_magic_value = 0x4c46584d; |
| static const u32 g_chip_addr_magic_value = 0xFFFFFF01; |
| |
| static bool is_valid(const struct dsp_image_seg *p) |
| { |
| return p->magic == g_magic_value; |
| } |
| |
| static bool is_hci_prog_list_seg(const struct dsp_image_seg *p) |
| { |
| return g_chip_addr_magic_value == p->chip_addr; |
| } |
| |
| static bool is_last(const struct dsp_image_seg *p) |
| { |
| return p->count == 0; |
| } |
| |
| static size_t dsp_sizeof(const struct dsp_image_seg *p) |
| { |
| return struct_size(p, data, p->count); |
| } |
| |
| static const struct dsp_image_seg *get_next_seg_ptr( |
| const struct dsp_image_seg *p) |
| { |
| return (struct dsp_image_seg *)((unsigned char *)(p) + dsp_sizeof(p)); |
| } |
| |
| /* |
| * CA0132 chip DSP transfer stuffs. For DSP download. |
| */ |
| #define INVALID_DMA_CHANNEL (~0U) |
| |
| /* |
| * Program a list of address/data pairs via the ChipIO widget. |
| * The segment data is in the format of successive pairs of words. |
| * These are repeated as indicated by the segment's count field. |
| */ |
| static int dspxfr_hci_write(struct hda_codec *codec, |
| const struct dsp_image_seg *fls) |
| { |
| int status; |
| const u32 *data; |
| unsigned int count; |
| |
| if (fls == NULL || fls->chip_addr != g_chip_addr_magic_value) { |
| codec_dbg(codec, "hci_write invalid params\n"); |
| return -EINVAL; |
| } |
| |
| count = fls->count; |
| data = (u32 *)(fls->data); |
| while (count >= 2) { |
| status = chipio_write(codec, data[0], data[1]); |
| if (status < 0) { |
| codec_dbg(codec, "hci_write chipio failed\n"); |
| return status; |
| } |
| count -= 2; |
| data += 2; |
| } |
| return 0; |
| } |
| |
| /** |
| * Write a block of data into DSP code or data RAM using pre-allocated |
| * DMA engine. |
| * |
| * @codec: the HDA codec |
| * @fls: pointer to a fast load image |
| * @reloc: Relocation address for loading single-segment overlays, or 0 for |
| * no relocation |
| * @dma_engine: pointer to DMA engine to be used for DSP download |
| * @dma_chan: The number of DMA channels used for DSP download |
| * @port_map_mask: port mapping |
| * @ovly: TRUE if overlay format is required |
| * |
| * Returns zero or a negative error code. |
| */ |
| static int dspxfr_one_seg(struct hda_codec *codec, |
| const struct dsp_image_seg *fls, |
| unsigned int reloc, |
| struct dma_engine *dma_engine, |
| unsigned int dma_chan, |
| unsigned int port_map_mask, |
| bool ovly) |
| { |
| int status = 0; |
| bool comm_dma_setup_done = false; |
| const unsigned int *data; |
| unsigned int chip_addx; |
| unsigned int words_to_write; |
| unsigned int buffer_size_words; |
| unsigned char *buffer_addx; |
| unsigned short hda_format; |
| unsigned int sample_rate_div; |
| unsigned int sample_rate_mul; |
| unsigned int num_chans; |
| unsigned int hda_frame_size_words; |
| unsigned int remainder_words; |
| const u32 *data_remainder; |
| u32 chip_addx_remainder; |
| unsigned int run_size_words; |
| const struct dsp_image_seg *hci_write = NULL; |
| unsigned long timeout; |
| bool dma_active; |
| |
| if (fls == NULL) |
| return -EINVAL; |
| if (is_hci_prog_list_seg(fls)) { |
| hci_write = fls; |
| fls = get_next_seg_ptr(fls); |
| } |
| |
| if (hci_write && (!fls || is_last(fls))) { |
| codec_dbg(codec, "hci_write\n"); |
| return dspxfr_hci_write(codec, hci_write); |
| } |
| |
| if (fls == NULL || dma_engine == NULL || port_map_mask == 0) { |
| codec_dbg(codec, "Invalid Params\n"); |
| return -EINVAL; |
| } |
| |
| data = fls->data; |
| chip_addx = fls->chip_addr, |
| words_to_write = fls->count; |
| |
| if (!words_to_write) |
| return hci_write ? dspxfr_hci_write(codec, hci_write) : 0; |
| if (reloc) |
| chip_addx = (chip_addx & (0xFFFF0000 << 2)) + (reloc << 2); |
| |
| if (!UC_RANGE(chip_addx, words_to_write) && |
| !X_RANGE_ALL(chip_addx, words_to_write) && |
| !Y_RANGE_ALL(chip_addx, words_to_write)) { |
| codec_dbg(codec, "Invalid chip_addx Params\n"); |
| return -EINVAL; |
| } |
| |
| buffer_size_words = (unsigned int)dma_get_buffer_size(dma_engine) / |
| sizeof(u32); |
| |
| buffer_addx = dma_get_buffer_addr(dma_engine); |
| |
| if (buffer_addx == NULL) { |
| codec_dbg(codec, "dma_engine buffer NULL\n"); |
| return -EINVAL; |
| } |
| |
| dma_get_converter_format(dma_engine, &hda_format); |
| sample_rate_div = ((get_hdafmt_rate(hda_format) >> 0) & 3) + 1; |
| sample_rate_mul = ((get_hdafmt_rate(hda_format) >> 3) & 3) + 1; |
| num_chans = get_hdafmt_chs(hda_format) + 1; |
| |
| hda_frame_size_words = ((sample_rate_div == 0) ? 0 : |
| (num_chans * sample_rate_mul / sample_rate_div)); |
| |
| if (hda_frame_size_words == 0) { |
| codec_dbg(codec, "frmsz zero\n"); |
| return -EINVAL; |
| } |
| |
| buffer_size_words = min(buffer_size_words, |
| (unsigned int)(UC_RANGE(chip_addx, 1) ? |
| 65536 : 32768)); |
| buffer_size_words -= buffer_size_words % hda_frame_size_words; |
| codec_dbg(codec, |
| "chpadr=0x%08x frmsz=%u nchan=%u " |
| "rate_mul=%u div=%u bufsz=%u\n", |
| chip_addx, hda_frame_size_words, num_chans, |
| sample_rate_mul, sample_rate_div, buffer_size_words); |
| |
| if (buffer_size_words < hda_frame_size_words) { |
| codec_dbg(codec, "dspxfr_one_seg:failed\n"); |
| return -EINVAL; |
| } |
| |
| remainder_words = words_to_write % hda_frame_size_words; |
| data_remainder = data; |
| chip_addx_remainder = chip_addx; |
| |
| data += remainder_words; |
| chip_addx += remainder_words*sizeof(u32); |
| words_to_write -= remainder_words; |
| |
| while (words_to_write != 0) { |
| run_size_words = min(buffer_size_words, words_to_write); |
| codec_dbg(codec, "dspxfr (seg loop)cnt=%u rs=%u remainder=%u\n", |
| words_to_write, run_size_words, remainder_words); |
| dma_xfer(dma_engine, data, run_size_words*sizeof(u32)); |
| if (!comm_dma_setup_done) { |
| status = dsp_dma_stop(codec, dma_chan, ovly); |
| if (status < 0) |
| return status; |
| status = dsp_dma_setup_common(codec, chip_addx, |
| dma_chan, port_map_mask, ovly); |
| if (status < 0) |
| return status; |
| comm_dma_setup_done = true; |
| } |
| |
| status = dsp_dma_setup(codec, chip_addx, |
| run_size_words, dma_chan); |
| if (status < 0) |
| return status; |
| status = dsp_dma_start(codec, dma_chan, ovly); |
| if (status < 0) |
| return status; |
| if (!dsp_is_dma_active(codec, dma_chan)) { |
| codec_dbg(codec, "dspxfr:DMA did not start\n"); |
| return -EIO; |
| } |
| status = dma_set_state(dma_engine, DMA_STATE_RUN); |
| if (status < 0) |
| return status; |
| if (remainder_words != 0) { |
| status = chipio_write_multiple(codec, |
| chip_addx_remainder, |
| data_remainder, |
| remainder_words); |
| if (status < 0) |
| return status; |
| remainder_words = 0; |
| } |
| if (hci_write) { |
| status = dspxfr_hci_write(codec, hci_write); |
| if (status < 0) |
| return status; |
| hci_write = NULL; |
| } |
| |
| timeout = jiffies + msecs_to_jiffies(2000); |
| do { |
| dma_active = dsp_is_dma_active(codec, dma_chan); |
| if (!dma_active) |
| break; |
| msleep(20); |
| } while (time_before(jiffies, timeout)); |
| if (dma_active) |
| break; |
| |
| codec_dbg(codec, "+++++ DMA complete\n"); |
| dma_set_state(dma_engine, DMA_STATE_STOP); |
| status = dma_reset(dma_engine); |
| |
| if (status < 0) |
| return status; |
| |
| data += run_size_words; |
| chip_addx += run_size_words*sizeof(u32); |
| words_to_write -= run_size_words; |
| } |
| |
| if (remainder_words != 0) { |
| status = chipio_write_multiple(codec, chip_addx_remainder, |
| data_remainder, remainder_words); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * Write the entire DSP image of a DSP code/data overlay to DSP memories |
| * |
| * @codec: the HDA codec |
| * @fls_data: pointer to a fast load image |
| * @reloc: Relocation address for loading single-segment overlays, or 0 for |
| * no relocation |
| * @sample_rate: sampling rate of the stream used for DSP download |
| * @channels: channels of the stream used for DSP download |
| * @ovly: TRUE if overlay format is required |
| * |
| * Returns zero or a negative error code. |
| */ |
| static int dspxfr_image(struct hda_codec *codec, |
| const struct dsp_image_seg *fls_data, |
| unsigned int reloc, |
| unsigned int sample_rate, |
| unsigned short channels, |
| bool ovly) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int status; |
| unsigned short hda_format = 0; |
| unsigned int response; |
| unsigned char stream_id = 0; |
| struct dma_engine *dma_engine; |
| unsigned int dma_chan; |
| unsigned int port_map_mask; |
| |
| if (fls_data == NULL) |
| return -EINVAL; |
| |
| dma_engine = kzalloc(sizeof(*dma_engine), GFP_KERNEL); |
| if (!dma_engine) |
| return -ENOMEM; |
| |
| dma_engine->dmab = kzalloc(sizeof(*dma_engine->dmab), GFP_KERNEL); |
| if (!dma_engine->dmab) { |
| kfree(dma_engine); |
| return -ENOMEM; |
| } |
| |
| dma_engine->codec = codec; |
| dma_convert_to_hda_format(codec, sample_rate, channels, &hda_format); |
| dma_engine->m_converter_format = hda_format; |
| dma_engine->buf_size = (ovly ? DSP_DMA_WRITE_BUFLEN_OVLY : |
| DSP_DMA_WRITE_BUFLEN_INIT) * 2; |
| |
| dma_chan = ovly ? INVALID_DMA_CHANNEL : 0; |
| |
| status = codec_set_converter_format(codec, WIDGET_CHIP_CTRL, |
| hda_format, &response); |
| |
| if (status < 0) { |
| codec_dbg(codec, "set converter format fail\n"); |
| goto exit; |
| } |
| |
| status = snd_hda_codec_load_dsp_prepare(codec, |
| dma_engine->m_converter_format, |
| dma_engine->buf_size, |
| dma_engine->dmab); |
| if (status < 0) |
| goto exit; |
| spec->dsp_stream_id = status; |
| |
| if (ovly) { |
| status = dspio_alloc_dma_chan(codec, &dma_chan); |
| if (status < 0) { |
| codec_dbg(codec, "alloc dmachan fail\n"); |
| dma_chan = INVALID_DMA_CHANNEL; |
| goto exit; |
| } |
| } |
| |
| port_map_mask = 0; |
| status = dsp_allocate_ports_format(codec, hda_format, |
| &port_map_mask); |
| if (status < 0) { |
| codec_dbg(codec, "alloc ports fail\n"); |
| goto exit; |
| } |
| |
| stream_id = dma_get_stream_id(dma_engine); |
| status = codec_set_converter_stream_channel(codec, |
| WIDGET_CHIP_CTRL, stream_id, 0, &response); |
| if (status < 0) { |
| codec_dbg(codec, "set stream chan fail\n"); |
| goto exit; |
| } |
| |
| while ((fls_data != NULL) && !is_last(fls_data)) { |
| if (!is_valid(fls_data)) { |
| codec_dbg(codec, "FLS check fail\n"); |
| status = -EINVAL; |
| goto exit; |
| } |
| status = dspxfr_one_seg(codec, fls_data, reloc, |
| dma_engine, dma_chan, |
| port_map_mask, ovly); |
| if (status < 0) |
| break; |
| |
| if (is_hci_prog_list_seg(fls_data)) |
| fls_data = get_next_seg_ptr(fls_data); |
| |
| if ((fls_data != NULL) && !is_last(fls_data)) |
| fls_data = get_next_seg_ptr(fls_data); |
| } |
| |
| if (port_map_mask != 0) |
| status = dsp_free_ports(codec); |
| |
| if (status < 0) |
| goto exit; |
| |
| status = codec_set_converter_stream_channel(codec, |
| WIDGET_CHIP_CTRL, 0, 0, &response); |
| |
| exit: |
| if (ovly && (dma_chan != INVALID_DMA_CHANNEL)) |
| dspio_free_dma_chan(codec, dma_chan); |
| |
| if (dma_engine->dmab->area) |
| snd_hda_codec_load_dsp_cleanup(codec, dma_engine->dmab); |
| kfree(dma_engine->dmab); |
| kfree(dma_engine); |
| |
| return status; |
| } |
| |
| /* |
| * CA0132 DSP download stuffs. |
| */ |
| static void dspload_post_setup(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| codec_dbg(codec, "---- dspload_post_setup ------\n"); |
| if (!ca0132_use_alt_functions(spec)) { |
| /*set DSP speaker to 2.0 configuration*/ |
| chipio_write(codec, XRAM_XRAM_INST_OFFSET(0x18), 0x08080080); |
| chipio_write(codec, XRAM_XRAM_INST_OFFSET(0x19), 0x3f800000); |
| |
| /*update write pointer*/ |
| chipio_write(codec, XRAM_XRAM_INST_OFFSET(0x29), 0x00000002); |
| } |
| } |
| |
| /** |
| * dspload_image - Download DSP from a DSP Image Fast Load structure. |
| * |
| * @codec: the HDA codec |
| * @fls: pointer to a fast load image |
| * @ovly: TRUE if overlay format is required |
| * @reloc: Relocation address for loading single-segment overlays, or 0 for |
| * no relocation |
| * @autostart: TRUE if DSP starts after loading; ignored if ovly is TRUE |
| * @router_chans: number of audio router channels to be allocated (0 means use |
| * internal defaults; max is 32) |
| * |
| * Download DSP from a DSP Image Fast Load structure. This structure is a |
| * linear, non-constant sized element array of structures, each of which |
| * contain the count of the data to be loaded, the data itself, and the |
| * corresponding starting chip address of the starting data location. |
| * Returns zero or a negative error code. |
| */ |
| static int dspload_image(struct hda_codec *codec, |
| const struct dsp_image_seg *fls, |
| bool ovly, |
| unsigned int reloc, |
| bool autostart, |
| int router_chans) |
| { |
| int status = 0; |
| unsigned int sample_rate; |
| unsigned short channels; |
| |
| codec_dbg(codec, "---- dspload_image begin ------\n"); |
| if (router_chans == 0) { |
| if (!ovly) |
| router_chans = DMA_TRANSFER_FRAME_SIZE_NWORDS; |
| else |
| router_chans = DMA_OVERLAY_FRAME_SIZE_NWORDS; |
| } |
| |
| sample_rate = 48000; |
| channels = (unsigned short)router_chans; |
| |
| while (channels > 16) { |
| sample_rate *= 2; |
| channels /= 2; |
| } |
| |
| do { |
| codec_dbg(codec, "Ready to program DMA\n"); |
| if (!ovly) |
| status = dsp_reset(codec); |
| |
| if (status < 0) |
| break; |
| |
| codec_dbg(codec, "dsp_reset() complete\n"); |
| status = dspxfr_image(codec, fls, reloc, sample_rate, channels, |
| ovly); |
| |
| if (status < 0) |
| break; |
| |
| codec_dbg(codec, "dspxfr_image() complete\n"); |
| if (autostart && !ovly) { |
| dspload_post_setup(codec); |
| status = dsp_set_run_state(codec); |
| } |
| |
| codec_dbg(codec, "LOAD FINISHED\n"); |
| } while (0); |
| |
| return status; |
| } |
| |
| #ifdef CONFIG_SND_HDA_CODEC_CA0132_DSP |
| static bool dspload_is_loaded(struct hda_codec *codec) |
| { |
| unsigned int data = 0; |
| int status = 0; |
| |
| status = chipio_read(codec, 0x40004, &data); |
| if ((status < 0) || (data != 1)) |
| return false; |
| |
| return true; |
| } |
| #else |
| #define dspload_is_loaded(codec) false |
| #endif |
| |
| static bool dspload_wait_loaded(struct hda_codec *codec) |
| { |
| unsigned long timeout = jiffies + msecs_to_jiffies(2000); |
| |
| do { |
| if (dspload_is_loaded(codec)) { |
| codec_info(codec, "ca0132 DSP downloaded and running\n"); |
| return true; |
| } |
| msleep(20); |
| } while (time_before(jiffies, timeout)); |
| |
| codec_err(codec, "ca0132 failed to download DSP\n"); |
| return false; |
| } |
| |
| /* |
| * ca0113 related functions. The ca0113 acts as the HDA bus for the pci-e |
| * based cards, and has a second mmio region, region2, that's used for special |
| * commands. |
| */ |
| |
| /* |
| * For cards with PCI-E region2 (Sound Blaster Z/ZxR, Recon3D, and AE-5) |
| * the mmio address 0x320 is used to set GPIO pins. The format for the data |
| * The first eight bits are just the number of the pin. So far, I've only seen |
| * this number go to 7. |
| * AE-5 note: The AE-5 seems to use pins 2 and 3 to somehow set the color value |
| * of the on-card LED. It seems to use pin 2 for data, then toggles 3 to on and |
| * then off to send that bit. |
| */ |
| static void ca0113_mmio_gpio_set(struct hda_codec *codec, unsigned int gpio_pin, |
| bool enable) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned short gpio_data; |
| |
| gpio_data = gpio_pin & 0xF; |
| gpio_data |= ((enable << 8) & 0x100); |
| |
| writew(gpio_data, spec->mem_base + 0x320); |
| } |
| |
| /* |
| * Special pci region2 commands that are only used by the AE-5. They follow |
| * a set format, and require reads at certain points to seemingly 'clear' |
| * the response data. My first tests didn't do these reads, and would cause |
| * the card to get locked up until the memory was read. These commands |
| * seem to work with three distinct values that I've taken to calling group, |
| * target-id, and value. |
| */ |
| static void ca0113_mmio_command_set(struct hda_codec *codec, unsigned int group, |
| unsigned int target, unsigned int value) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int write_val; |
| |
| writel(0x0000007e, spec->mem_base + 0x210); |
| readl(spec->mem_base + 0x210); |
| writel(0x0000005a, spec->mem_base + 0x210); |
| readl(spec->mem_base + 0x210); |
| readl(spec->mem_base + 0x210); |
| |
| writel(0x00800005, spec->mem_base + 0x20c); |
| writel(group, spec->mem_base + 0x804); |
| |
| writel(0x00800005, spec->mem_base + 0x20c); |
| write_val = (target & 0xff); |
| write_val |= (value << 8); |
| |
| |
| writel(write_val, spec->mem_base + 0x204); |
| /* |
| * Need delay here or else it goes too fast and works inconsistently. |
| */ |
| msleep(20); |
| |
| readl(spec->mem_base + 0x860); |
| readl(spec->mem_base + 0x854); |
| readl(spec->mem_base + 0x840); |
| |
| writel(0x00800004, spec->mem_base + 0x20c); |
| writel(0x00000000, spec->mem_base + 0x210); |
| readl(spec->mem_base + 0x210); |
| readl(spec->mem_base + 0x210); |
| } |
| |
| /* |
| * This second type of command is used for setting the sound filter type. |
| */ |
| static void ca0113_mmio_command_set_type2(struct hda_codec *codec, |
| unsigned int group, unsigned int target, unsigned int value) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int write_val; |
| |
| writel(0x0000007e, spec->mem_base + 0x210); |
| readl(spec->mem_base + 0x210); |
| writel(0x0000005a, spec->mem_base + 0x210); |
| readl(spec->mem_base + 0x210); |
| readl(spec->mem_base + 0x210); |
| |
| writel(0x00800003, spec->mem_base + 0x20c); |
| writel(group, spec->mem_base + 0x804); |
| |
| writel(0x00800005, spec->mem_base + 0x20c); |
| write_val = (target & 0xff); |
| write_val |= (value << 8); |
| |
| |
| writel(write_val, spec->mem_base + 0x204); |
| msleep(20); |
| readl(spec->mem_base + 0x860); |
| readl(spec->mem_base + 0x854); |
| readl(spec->mem_base + 0x840); |
| |
| writel(0x00800004, spec->mem_base + 0x20c); |
| writel(0x00000000, spec->mem_base + 0x210); |
| readl(spec->mem_base + 0x210); |
| readl(spec->mem_base + 0x210); |
| } |
| |
| /* |
| * Setup GPIO for the other variants of Core3D. |
| */ |
| |
| /* |
| * Sets up the GPIO pins so that they are discoverable. If this isn't done, |
| * the card shows as having no GPIO pins. |
| */ |
| static void ca0132_gpio_init(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| case QUIRK_AE5: |
| snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00); |
| snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x53); |
| snd_hda_codec_write(codec, 0x01, 0, 0x790, 0x23); |
| break; |
| case QUIRK_R3DI: |
| snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00); |
| snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x5B); |
| break; |
| default: |
| break; |
| } |
| |
| } |
| |
| /* Sets the GPIO for audio output. */ |
| static void ca0132_gpio_setup(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| snd_hda_codec_write(codec, 0x01, 0, |
| AC_VERB_SET_GPIO_DIRECTION, 0x07); |
| snd_hda_codec_write(codec, 0x01, 0, |
| AC_VERB_SET_GPIO_MASK, 0x07); |
| snd_hda_codec_write(codec, 0x01, 0, |
| AC_VERB_SET_GPIO_DATA, 0x04); |
| snd_hda_codec_write(codec, 0x01, 0, |
| AC_VERB_SET_GPIO_DATA, 0x06); |
| break; |
| case QUIRK_R3DI: |
| snd_hda_codec_write(codec, 0x01, 0, |
| AC_VERB_SET_GPIO_DIRECTION, 0x1E); |
| snd_hda_codec_write(codec, 0x01, 0, |
| AC_VERB_SET_GPIO_MASK, 0x1F); |
| snd_hda_codec_write(codec, 0x01, 0, |
| AC_VERB_SET_GPIO_DATA, 0x0C); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /* |
| * GPIO control functions for the Recon3D integrated. |
| */ |
| |
| enum r3di_gpio_bit { |
| /* Bit 1 - Switch between front/rear mic. 0 = rear, 1 = front */ |
| R3DI_MIC_SELECT_BIT = 1, |
| /* Bit 2 - Switch between headphone/line out. 0 = Headphone, 1 = Line */ |
| R3DI_OUT_SELECT_BIT = 2, |
| /* |
| * I dunno what this actually does, but it stays on until the dsp |
| * is downloaded. |
| */ |
| R3DI_GPIO_DSP_DOWNLOADING = 3, |
| /* |
| * Same as above, no clue what it does, but it comes on after the dsp |
| * is downloaded. |
| */ |
| R3DI_GPIO_DSP_DOWNLOADED = 4 |
| }; |
| |
| enum r3di_mic_select { |
| /* Set GPIO bit 1 to 0 for rear mic */ |
| R3DI_REAR_MIC = 0, |
| /* Set GPIO bit 1 to 1 for front microphone*/ |
| R3DI_FRONT_MIC = 1 |
| }; |
| |
| enum r3di_out_select { |
| /* Set GPIO bit 2 to 0 for headphone */ |
| R3DI_HEADPHONE_OUT = 0, |
| /* Set GPIO bit 2 to 1 for speaker */ |
| R3DI_LINE_OUT = 1 |
| }; |
| enum r3di_dsp_status { |
| /* Set GPIO bit 3 to 1 until DSP is downloaded */ |
| R3DI_DSP_DOWNLOADING = 0, |
| /* Set GPIO bit 4 to 1 once DSP is downloaded */ |
| R3DI_DSP_DOWNLOADED = 1 |
| }; |
| |
| |
| static void r3di_gpio_mic_set(struct hda_codec *codec, |
| enum r3di_mic_select cur_mic) |
| { |
| unsigned int cur_gpio; |
| |
| /* Get the current GPIO Data setup */ |
| cur_gpio = snd_hda_codec_read(codec, 0x01, 0, AC_VERB_GET_GPIO_DATA, 0); |
| |
| switch (cur_mic) { |
| case R3DI_REAR_MIC: |
| cur_gpio &= ~(1 << R3DI_MIC_SELECT_BIT); |
| break; |
| case R3DI_FRONT_MIC: |
| cur_gpio |= (1 << R3DI_MIC_SELECT_BIT); |
| break; |
| } |
| snd_hda_codec_write(codec, codec->core.afg, 0, |
| AC_VERB_SET_GPIO_DATA, cur_gpio); |
| } |
| |
| static void r3di_gpio_out_set(struct hda_codec *codec, |
| enum r3di_out_select cur_out) |
| { |
| unsigned int cur_gpio; |
| |
| /* Get the current GPIO Data setup */ |
| cur_gpio = snd_hda_codec_read(codec, 0x01, 0, AC_VERB_GET_GPIO_DATA, 0); |
| |
| switch (cur_out) { |
| case R3DI_HEADPHONE_OUT: |
| cur_gpio &= ~(1 << R3DI_OUT_SELECT_BIT); |
| break; |
| case R3DI_LINE_OUT: |
| cur_gpio |= (1 << R3DI_OUT_SELECT_BIT); |
| break; |
| } |
| snd_hda_codec_write(codec, codec->core.afg, 0, |
| AC_VERB_SET_GPIO_DATA, cur_gpio); |
| } |
| |
| static void r3di_gpio_dsp_status_set(struct hda_codec *codec, |
| enum r3di_dsp_status dsp_status) |
| { |
| unsigned int cur_gpio; |
| |
| /* Get the current GPIO Data setup */ |
| cur_gpio = snd_hda_codec_read(codec, 0x01, 0, AC_VERB_GET_GPIO_DATA, 0); |
| |
| switch (dsp_status) { |
| case R3DI_DSP_DOWNLOADING: |
| cur_gpio |= (1 << R3DI_GPIO_DSP_DOWNLOADING); |
| snd_hda_codec_write(codec, codec->core.afg, 0, |
| AC_VERB_SET_GPIO_DATA, cur_gpio); |
| break; |
| case R3DI_DSP_DOWNLOADED: |
| /* Set DOWNLOADING bit to 0. */ |
| cur_gpio &= ~(1 << R3DI_GPIO_DSP_DOWNLOADING); |
| |
| snd_hda_codec_write(codec, codec->core.afg, 0, |
| AC_VERB_SET_GPIO_DATA, cur_gpio); |
| |
| cur_gpio |= (1 << R3DI_GPIO_DSP_DOWNLOADED); |
| break; |
| } |
| |
| snd_hda_codec_write(codec, codec->core.afg, 0, |
| AC_VERB_SET_GPIO_DATA, cur_gpio); |
| } |
| |
| /* |
| * PCM callbacks |
| */ |
| static int ca0132_playback_pcm_prepare(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| unsigned int stream_tag, |
| unsigned int format, |
| struct snd_pcm_substream *substream) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| snd_hda_codec_setup_stream(codec, spec->dacs[0], stream_tag, 0, format); |
| |
| return 0; |
| } |
| |
| static int ca0132_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| struct snd_pcm_substream *substream) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| if (spec->dsp_state == DSP_DOWNLOADING) |
| return 0; |
| |
| /*If Playback effects are on, allow stream some time to flush |
| *effects tail*/ |
| if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]) |
| msleep(50); |
| |
| snd_hda_codec_cleanup_stream(codec, spec->dacs[0]); |
| |
| return 0; |
| } |
| |
| static unsigned int ca0132_playback_pcm_delay(struct hda_pcm_stream *info, |
| struct hda_codec *codec, |
| struct snd_pcm_substream *substream) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int latency = DSP_PLAYBACK_INIT_LATENCY; |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| |
| if (spec->dsp_state != DSP_DOWNLOADED) |
| return 0; |
| |
| /* Add latency if playback enhancement and either effect is enabled. */ |
| if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]) { |
| if ((spec->effects_switch[SURROUND - EFFECT_START_NID]) || |
| (spec->effects_switch[DIALOG_PLUS - EFFECT_START_NID])) |
| latency += DSP_PLAY_ENHANCEMENT_LATENCY; |
| } |
| |
| /* Applying Speaker EQ adds latency as well. */ |
| if (spec->cur_out_type == SPEAKER_OUT) |
| latency += DSP_SPEAKER_OUT_LATENCY; |
| |
| return (latency * runtime->rate) / 1000; |
| } |
| |
| /* |
| * Digital out |
| */ |
| static int ca0132_dig_playback_pcm_open(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| struct snd_pcm_substream *substream) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| return snd_hda_multi_out_dig_open(codec, &spec->multiout); |
| } |
| |
| static int ca0132_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| unsigned int stream_tag, |
| unsigned int format, |
| struct snd_pcm_substream *substream) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, |
| stream_tag, format, substream); |
| } |
| |
| static int ca0132_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| struct snd_pcm_substream *substream) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout); |
| } |
| |
| static int ca0132_dig_playback_pcm_close(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| struct snd_pcm_substream *substream) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| return snd_hda_multi_out_dig_close(codec, &spec->multiout); |
| } |
| |
| /* |
| * Analog capture |
| */ |
| static int ca0132_capture_pcm_prepare(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| unsigned int stream_tag, |
| unsigned int format, |
| struct snd_pcm_substream *substream) |
| { |
| snd_hda_codec_setup_stream(codec, hinfo->nid, |
| stream_tag, 0, format); |
| |
| return 0; |
| } |
| |
| static int ca0132_capture_pcm_cleanup(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| struct snd_pcm_substream *substream) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| if (spec->dsp_state == DSP_DOWNLOADING) |
| return 0; |
| |
| snd_hda_codec_cleanup_stream(codec, hinfo->nid); |
| return 0; |
| } |
| |
| static unsigned int ca0132_capture_pcm_delay(struct hda_pcm_stream *info, |
| struct hda_codec *codec, |
| struct snd_pcm_substream *substream) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int latency = DSP_CAPTURE_INIT_LATENCY; |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| |
| if (spec->dsp_state != DSP_DOWNLOADED) |
| return 0; |
| |
| if (spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID]) |
| latency += DSP_CRYSTAL_VOICE_LATENCY; |
| |
| return (latency * runtime->rate) / 1000; |
| } |
| |
| /* |
| * Controls stuffs. |
| */ |
| |
| /* |
| * Mixer controls helpers. |
| */ |
| #define CA0132_CODEC_VOL_MONO(xname, nid, channel, dir) \ |
| { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ |
| .name = xname, \ |
| .subdevice = HDA_SUBDEV_AMP_FLAG, \ |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \ |
| SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ |
| SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK, \ |
| .info = ca0132_volume_info, \ |
| .get = ca0132_volume_get, \ |
| .put = ca0132_volume_put, \ |
| .tlv = { .c = ca0132_volume_tlv }, \ |
| .private_value = HDA_COMPOSE_AMP_VAL(nid, channel, 0, dir) } |
| |
| /* |
| * Creates a mixer control that uses defaults of HDA_CODEC_VOL except for the |
| * volume put, which is used for setting the DSP volume. This was done because |
| * the ca0132 functions were taking too much time and causing lag. |
| */ |
| #define CA0132_ALT_CODEC_VOL_MONO(xname, nid, channel, dir) \ |
| { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ |
| .name = xname, \ |
| .subdevice = HDA_SUBDEV_AMP_FLAG, \ |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \ |
| SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ |
| SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK, \ |
| .info = snd_hda_mixer_amp_volume_info, \ |
| .get = snd_hda_mixer_amp_volume_get, \ |
| .put = ca0132_alt_volume_put, \ |
| .tlv = { .c = snd_hda_mixer_amp_tlv }, \ |
| .private_value = HDA_COMPOSE_AMP_VAL(nid, channel, 0, dir) } |
| |
| #define CA0132_CODEC_MUTE_MONO(xname, nid, channel, dir) \ |
| { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ |
| .name = xname, \ |
| .subdevice = HDA_SUBDEV_AMP_FLAG, \ |
| .info = snd_hda_mixer_amp_switch_info, \ |
| .get = ca0132_switch_get, \ |
| .put = ca0132_switch_put, \ |
| .private_value = HDA_COMPOSE_AMP_VAL(nid, channel, 0, dir) } |
| |
| /* stereo */ |
| #define CA0132_CODEC_VOL(xname, nid, dir) \ |
| CA0132_CODEC_VOL_MONO(xname, nid, 3, dir) |
| #define CA0132_ALT_CODEC_VOL(xname, nid, dir) \ |
| CA0132_ALT_CODEC_VOL_MONO(xname, nid, 3, dir) |
| #define CA0132_CODEC_MUTE(xname, nid, dir) \ |
| CA0132_CODEC_MUTE_MONO(xname, nid, 3, dir) |
| |
| /* lookup tables */ |
| /* |
| * Lookup table with decibel values for the DSP. When volume is changed in |
| * Windows, the DSP is also sent the dB value in floating point. In Windows, |
| * these values have decimal points, probably because the Windows driver |
| * actually uses floating point. We can't here, so I made a lookup table of |
| * values -90 to 9. -90 is the lowest decibel value for both the ADC's and the |
| * DAC's, and 9 is the maximum. |
| */ |
| static const unsigned int float_vol_db_lookup[] = { |
| 0xC2B40000, 0xC2B20000, 0xC2B00000, 0xC2AE0000, 0xC2AC0000, 0xC2AA0000, |
| 0xC2A80000, 0xC2A60000, 0xC2A40000, 0xC2A20000, 0xC2A00000, 0xC29E0000, |
| 0xC29C0000, 0xC29A0000, 0xC2980000, 0xC2960000, 0xC2940000, 0xC2920000, |
| 0xC2900000, 0xC28E0000, 0xC28C0000, 0xC28A0000, 0xC2880000, 0xC2860000, |
| 0xC2840000, 0xC2820000, 0xC2800000, 0xC27C0000, 0xC2780000, 0xC2740000, |
| 0xC2700000, 0xC26C0000, 0xC2680000, 0xC2640000, 0xC2600000, 0xC25C0000, |
| 0xC2580000, 0xC2540000, 0xC2500000, 0xC24C0000, 0xC2480000, 0xC2440000, |
| 0xC2400000, 0xC23C0000, 0xC2380000, 0xC2340000, 0xC2300000, 0xC22C0000, |
| 0xC2280000, 0xC2240000, 0xC2200000, 0xC21C0000, 0xC2180000, 0xC2140000, |
| 0xC2100000, 0xC20C0000, 0xC2080000, 0xC2040000, 0xC2000000, 0xC1F80000, |
| 0xC1F00000, 0xC1E80000, 0xC1E00000, 0xC1D80000, 0xC1D00000, 0xC1C80000, |
| 0xC1C00000, 0xC1B80000, 0xC1B00000, 0xC1A80000, 0xC1A00000, 0xC1980000, |
| 0xC1900000, 0xC1880000, 0xC1800000, 0xC1700000, 0xC1600000, 0xC1500000, |
| 0xC1400000, 0xC1300000, 0xC1200000, 0xC1100000, 0xC1000000, 0xC0E00000, |
| 0xC0C00000, 0xC0A00000, 0xC0800000, 0xC0400000, 0xC0000000, 0xBF800000, |
| 0x00000000, 0x3F800000, 0x40000000, 0x40400000, 0x40800000, 0x40A00000, |
| 0x40C00000, 0x40E00000, 0x41000000, 0x41100000 |
| }; |
| |
| /* |
| * This table counts from float 0 to 1 in increments of .01, which is |
| * useful for a few different sliders. |
| */ |
| static const unsigned int float_zero_to_one_lookup[] = { |
| 0x00000000, 0x3C23D70A, 0x3CA3D70A, 0x3CF5C28F, 0x3D23D70A, 0x3D4CCCCD, |
| 0x3D75C28F, 0x3D8F5C29, 0x3DA3D70A, 0x3DB851EC, 0x3DCCCCCD, 0x3DE147AE, |
| 0x3DF5C28F, 0x3E051EB8, 0x3E0F5C29, 0x3E19999A, 0x3E23D70A, 0x3E2E147B, |
| 0x3E3851EC, 0x3E428F5C, 0x3E4CCCCD, 0x3E570A3D, 0x3E6147AE, 0x3E6B851F, |
| 0x3E75C28F, 0x3E800000, 0x3E851EB8, 0x3E8A3D71, 0x3E8F5C29, 0x3E947AE1, |
| 0x3E99999A, 0x3E9EB852, 0x3EA3D70A, 0x3EA8F5C3, 0x3EAE147B, 0x3EB33333, |
| 0x3EB851EC, 0x3EBD70A4, 0x3EC28F5C, 0x3EC7AE14, 0x3ECCCCCD, 0x3ED1EB85, |
| 0x3ED70A3D, 0x3EDC28F6, 0x3EE147AE, 0x3EE66666, 0x3EEB851F, 0x3EF0A3D7, |
| 0x3EF5C28F, 0x3EFAE148, 0x3F000000, 0x3F028F5C, 0x3F051EB8, 0x3F07AE14, |
| 0x3F0A3D71, 0x3F0CCCCD, 0x3F0F5C29, 0x3F11EB85, 0x3F147AE1, 0x3F170A3D, |
| 0x3F19999A, 0x3F1C28F6, 0x3F1EB852, 0x3F2147AE, 0x3F23D70A, 0x3F266666, |
| 0x3F28F5C3, 0x3F2B851F, 0x3F2E147B, 0x3F30A3D7, 0x3F333333, 0x3F35C28F, |
| 0x3F3851EC, 0x3F3AE148, 0x3F3D70A4, 0x3F400000, 0x3F428F5C, 0x3F451EB8, |
| 0x3F47AE14, 0x3F4A3D71, 0x3F4CCCCD, 0x3F4F5C29, 0x3F51EB85, 0x3F547AE1, |
| 0x3F570A3D, 0x3F59999A, 0x3F5C28F6, 0x3F5EB852, 0x3F6147AE, 0x3F63D70A, |
| 0x3F666666, 0x3F68F5C3, 0x3F6B851F, 0x3F6E147B, 0x3F70A3D7, 0x3F733333, |
| 0x3F75C28F, 0x3F7851EC, 0x3F7AE148, 0x3F7D70A4, 0x3F800000 |
| }; |
| |
| /* |
| * This table counts from float 10 to 1000, which is the range of the x-bass |
| * crossover slider in Windows. |
| */ |
| static const unsigned int float_xbass_xover_lookup[] = { |
| 0x41200000, 0x41A00000, 0x41F00000, 0x42200000, 0x42480000, 0x42700000, |
| 0x428C0000, 0x42A00000, 0x42B40000, 0x42C80000, 0x42DC0000, 0x42F00000, |
| 0x43020000, 0x430C0000, 0x43160000, 0x43200000, 0x432A0000, 0x43340000, |
| 0x433E0000, 0x43480000, 0x43520000, 0x435C0000, 0x43660000, 0x43700000, |
| 0x437A0000, 0x43820000, 0x43870000, 0x438C0000, 0x43910000, 0x43960000, |
| 0x439B0000, 0x43A00000, 0x43A50000, 0x43AA0000, 0x43AF0000, 0x43B40000, |
| 0x43B90000, 0x43BE0000, 0x43C30000, 0x43C80000, 0x43CD0000, 0x43D20000, |
| 0x43D70000, 0x43DC0000, 0x43E10000, 0x43E60000, 0x43EB0000, 0x43F00000, |
| 0x43F50000, 0x43FA0000, 0x43FF0000, 0x44020000, 0x44048000, 0x44070000, |
| 0x44098000, 0x440C0000, 0x440E8000, 0x44110000, 0x44138000, 0x44160000, |
| 0x44188000, 0x441B0000, 0x441D8000, 0x44200000, 0x44228000, 0x44250000, |
| 0x44278000, 0x442A0000, 0x442C8000, 0x442F0000, 0x44318000, 0x44340000, |
| 0x44368000, 0x44390000, 0x443B8000, 0x443E0000, 0x44408000, 0x44430000, |
| 0x44458000, 0x44480000, 0x444A8000, 0x444D0000, 0x444F8000, 0x44520000, |
| 0x44548000, 0x44570000, 0x44598000, 0x445C0000, 0x445E8000, 0x44610000, |
| 0x44638000, 0x44660000, 0x44688000, 0x446B0000, 0x446D8000, 0x44700000, |
| 0x44728000, 0x44750000, 0x44778000, 0x447A0000 |
| }; |
| |
| /* The following are for tuning of products */ |
| #ifdef ENABLE_TUNING_CONTROLS |
| |
| static unsigned int voice_focus_vals_lookup[] = { |
| 0x41A00000, 0x41A80000, 0x41B00000, 0x41B80000, 0x41C00000, 0x41C80000, |
| 0x41D00000, 0x41D80000, 0x41E00000, 0x41E80000, 0x41F00000, 0x41F80000, |
| 0x42000000, 0x42040000, 0x42080000, 0x420C0000, 0x42100000, 0x42140000, |
| 0x42180000, 0x421C0000, 0x42200000, 0x42240000, 0x42280000, 0x422C0000, |
| 0x42300000, 0x42340000, 0x42380000, 0x423C0000, 0x42400000, 0x42440000, |
| 0x42480000, 0x424C0000, 0x42500000, 0x42540000, 0x42580000, 0x425C0000, |
| 0x42600000, 0x42640000, 0x42680000, 0x426C0000, 0x42700000, 0x42740000, |
| 0x42780000, 0x427C0000, 0x42800000, 0x42820000, 0x42840000, 0x42860000, |
| 0x42880000, 0x428A0000, 0x428C0000, 0x428E0000, 0x42900000, 0x42920000, |
| 0x42940000, 0x42960000, 0x42980000, 0x429A0000, 0x429C0000, 0x429E0000, |
| 0x42A00000, 0x42A20000, 0x42A40000, 0x42A60000, 0x42A80000, 0x42AA0000, |
| 0x42AC0000, 0x42AE0000, 0x42B00000, 0x42B20000, 0x42B40000, 0x42B60000, |
| 0x42B80000, 0x42BA0000, 0x42BC0000, 0x42BE0000, 0x42C00000, 0x42C20000, |
| 0x42C40000, 0x42C60000, 0x42C80000, 0x42CA0000, 0x42CC0000, 0x42CE0000, |
| 0x42D00000, 0x42D20000, 0x42D40000, 0x42D60000, 0x42D80000, 0x42DA0000, |
| 0x42DC0000, 0x42DE0000, 0x42E00000, 0x42E20000, 0x42E40000, 0x42E60000, |
| 0x42E80000, 0x42EA0000, 0x42EC0000, 0x42EE0000, 0x42F00000, 0x42F20000, |
| 0x42F40000, 0x42F60000, 0x42F80000, 0x42FA0000, 0x42FC0000, 0x42FE0000, |
| 0x43000000, 0x43010000, 0x43020000, 0x43030000, 0x43040000, 0x43050000, |
| 0x43060000, 0x43070000, 0x43080000, 0x43090000, 0x430A0000, 0x430B0000, |
| 0x430C0000, 0x430D0000, 0x430E0000, 0x430F0000, 0x43100000, 0x43110000, |
| 0x43120000, 0x43130000, 0x43140000, 0x43150000, 0x43160000, 0x43170000, |
| 0x43180000, 0x43190000, 0x431A0000, 0x431B0000, 0x431C0000, 0x431D0000, |
| 0x431E0000, 0x431F0000, 0x43200000, 0x43210000, 0x43220000, 0x43230000, |
| 0x43240000, 0x43250000, 0x43260000, 0x43270000, 0x43280000, 0x43290000, |
| 0x432A0000, 0x432B0000, 0x432C0000, 0x432D0000, 0x432E0000, 0x432F0000, |
| 0x43300000, 0x43310000, 0x43320000, 0x43330000, 0x43340000 |
| }; |
| |
| static unsigned int mic_svm_vals_lookup[] = { |
| 0x00000000, 0x3C23D70A, 0x3CA3D70A, 0x3CF5C28F, 0x3D23D70A, 0x3D4CCCCD, |
| 0x3D75C28F, 0x3D8F5C29, 0x3DA3D70A, 0x3DB851EC, 0x3DCCCCCD, 0x3DE147AE, |
| 0x3DF5C28F, 0x3E051EB8, 0x3E0F5C29, 0x3E19999A, 0x3E23D70A, 0x3E2E147B, |
| 0x3E3851EC, 0x3E428F5C, 0x3E4CCCCD, 0x3E570A3D, 0x3E6147AE, 0x3E6B851F, |
| 0x3E75C28F, 0x3E800000, 0x3E851EB8, 0x3E8A3D71, 0x3E8F5C29, 0x3E947AE1, |
| 0x3E99999A, 0x3E9EB852, 0x3EA3D70A, 0x3EA8F5C3, 0x3EAE147B, 0x3EB33333, |
| 0x3EB851EC, 0x3EBD70A4, 0x3EC28F5C, 0x3EC7AE14, 0x3ECCCCCD, 0x3ED1EB85, |
| 0x3ED70A3D, 0x3EDC28F6, 0x3EE147AE, 0x3EE66666, 0x3EEB851F, 0x3EF0A3D7, |
| 0x3EF5C28F, 0x3EFAE148, 0x3F000000, 0x3F028F5C, 0x3F051EB8, 0x3F07AE14, |
| 0x3F0A3D71, 0x3F0CCCCD, 0x3F0F5C29, 0x3F11EB85, 0x3F147AE1, 0x3F170A3D, |
| 0x3F19999A, 0x3F1C28F6, 0x3F1EB852, 0x3F2147AE, 0x3F23D70A, 0x3F266666, |
| 0x3F28F5C3, 0x3F2B851F, 0x3F2E147B, 0x3F30A3D7, 0x3F333333, 0x3F35C28F, |
| 0x3F3851EC, 0x3F3AE148, 0x3F3D70A4, 0x3F400000, 0x3F428F5C, 0x3F451EB8, |
| 0x3F47AE14, 0x3F4A3D71, 0x3F4CCCCD, 0x3F4F5C29, 0x3F51EB85, 0x3F547AE1, |
| 0x3F570A3D, 0x3F59999A, 0x3F5C28F6, 0x3F5EB852, 0x3F6147AE, 0x3F63D70A, |
| 0x3F666666, 0x3F68F5C3, 0x3F6B851F, 0x3F6E147B, 0x3F70A3D7, 0x3F733333, |
| 0x3F75C28F, 0x3F7851EC, 0x3F7AE148, 0x3F7D70A4, 0x3F800000 |
| }; |
| |
| static unsigned int equalizer_vals_lookup[] = { |
| 0xC1C00000, 0xC1B80000, 0xC1B00000, 0xC1A80000, 0xC1A00000, 0xC1980000, |
| 0xC1900000, 0xC1880000, 0xC1800000, 0xC1700000, 0xC1600000, 0xC1500000, |
| 0xC1400000, 0xC1300000, 0xC1200000, 0xC1100000, 0xC1000000, 0xC0E00000, |
| 0xC0C00000, 0xC0A00000, 0xC0800000, 0xC0400000, 0xC0000000, 0xBF800000, |
| 0x00000000, 0x3F800000, 0x40000000, 0x40400000, 0x40800000, 0x40A00000, |
| 0x40C00000, 0x40E00000, 0x41000000, 0x41100000, 0x41200000, 0x41300000, |
| 0x41400000, 0x41500000, 0x41600000, 0x41700000, 0x41800000, 0x41880000, |
| 0x41900000, 0x41980000, 0x41A00000, 0x41A80000, 0x41B00000, 0x41B80000, |
| 0x41C00000 |
| }; |
| |
| static int tuning_ctl_set(struct hda_codec *codec, hda_nid_t nid, |
| unsigned int *lookup, int idx) |
| { |
| int i = 0; |
| |
| for (i = 0; i < TUNING_CTLS_COUNT; i++) |
| if (nid == ca0132_tuning_ctls[i].nid) |
| break; |
| |
| snd_hda_power_up(codec); |
| dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, |
| ca0132_tuning_ctls[i].req, |
| &(lookup[idx]), sizeof(unsigned int)); |
| snd_hda_power_down(codec); |
| |
| return 1; |
| } |
| |
| static int tuning_ctl_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid = get_amp_nid(kcontrol); |
| long *valp = ucontrol->value.integer.value; |
| int idx = nid - TUNING_CTL_START_NID; |
| |
| *valp = spec->cur_ctl_vals[idx]; |
| return 0; |
| } |
| |
| static int voice_focus_ctl_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| int chs = get_amp_channels(kcontrol); |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = chs == 3 ? 2 : 1; |
| uinfo->value.integer.min = 20; |
| uinfo->value.integer.max = 180; |
| uinfo->value.integer.step = 1; |
| |
| return 0; |
| } |
| |
| static int voice_focus_ctl_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid = get_amp_nid(kcontrol); |
| long *valp = ucontrol->value.integer.value; |
| int idx; |
| |
| idx = nid - TUNING_CTL_START_NID; |
| /* any change? */ |
| if (spec->cur_ctl_vals[idx] == *valp) |
| return 0; |
| |
| spec->cur_ctl_vals[idx] = *valp; |
| |
| idx = *valp - 20; |
| tuning_ctl_set(codec, nid, voice_focus_vals_lookup, idx); |
| |
| return 1; |
| } |
| |
| static int mic_svm_ctl_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| int chs = get_amp_channels(kcontrol); |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = chs == 3 ? 2 : 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 100; |
| uinfo->value.integer.step = 1; |
| |
| return 0; |
| } |
| |
| static int mic_svm_ctl_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid = get_amp_nid(kcontrol); |
| long *valp = ucontrol->value.integer.value; |
| int idx; |
| |
| idx = nid - TUNING_CTL_START_NID; |
| /* any change? */ |
| if (spec->cur_ctl_vals[idx] == *valp) |
| return 0; |
| |
| spec->cur_ctl_vals[idx] = *valp; |
| |
| idx = *valp; |
| tuning_ctl_set(codec, nid, mic_svm_vals_lookup, idx); |
| |
| return 0; |
| } |
| |
| static int equalizer_ctl_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| int chs = get_amp_channels(kcontrol); |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = chs == 3 ? 2 : 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 48; |
| uinfo->value.integer.step = 1; |
| |
| return 0; |
| } |
| |
| static int equalizer_ctl_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid = get_amp_nid(kcontrol); |
| long *valp = ucontrol->value.integer.value; |
| int idx; |
| |
| idx = nid - TUNING_CTL_START_NID; |
| /* any change? */ |
| if (spec->cur_ctl_vals[idx] == *valp) |
| return 0; |
| |
| spec->cur_ctl_vals[idx] = *valp; |
| |
| idx = *valp; |
| tuning_ctl_set(codec, nid, equalizer_vals_lookup, idx); |
| |
| return 1; |
| } |
| |
| static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(voice_focus_db_scale, 2000, 100, 0); |
| static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(eq_db_scale, -2400, 100, 0); |
| |
| static int add_tuning_control(struct hda_codec *codec, |
| hda_nid_t pnid, hda_nid_t nid, |
| const char *name, int dir) |
| { |
| char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; |
| int type = dir ? HDA_INPUT : HDA_OUTPUT; |
| struct snd_kcontrol_new knew = |
| HDA_CODEC_VOLUME_MONO(namestr, nid, 1, 0, type); |
| |
| knew.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | |
| SNDRV_CTL_ELEM_ACCESS_TLV_READ; |
| knew.tlv.c = 0; |
| knew.tlv.p = 0; |
| switch (pnid) { |
| case VOICE_FOCUS: |
| knew.info = voice_focus_ctl_info; |
| knew.get = tuning_ctl_get; |
| knew.put = voice_focus_ctl_put; |
| knew.tlv.p = voice_focus_db_scale; |
| break; |
| case MIC_SVM: |
| knew.info = mic_svm_ctl_info; |
| knew.get = tuning_ctl_get; |
| knew.put = mic_svm_ctl_put; |
| break; |
| case EQUALIZER: |
| knew.info = equalizer_ctl_info; |
| knew.get = tuning_ctl_get; |
| knew.put = equalizer_ctl_put; |
| knew.tlv.p = eq_db_scale; |
| break; |
| default: |
| return 0; |
| } |
| knew.private_value = |
| HDA_COMPOSE_AMP_VAL(nid, 1, 0, type); |
| sprintf(namestr, "%s %s Volume", name, dirstr[dir]); |
| return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec)); |
| } |
| |
| static int add_tuning_ctls(struct hda_codec *codec) |
| { |
| int i; |
| int err; |
| |
| for (i = 0; i < TUNING_CTLS_COUNT; i++) { |
| err = add_tuning_control(codec, |
| ca0132_tuning_ctls[i].parent_nid, |
| ca0132_tuning_ctls[i].nid, |
| ca0132_tuning_ctls[i].name, |
| ca0132_tuning_ctls[i].direct); |
| if (err < 0) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static void ca0132_init_tuning_defaults(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int i; |
| |
| /* Wedge Angle defaults to 30. 10 below is 30 - 20. 20 is min. */ |
| spec->cur_ctl_vals[WEDGE_ANGLE - TUNING_CTL_START_NID] = 10; |
| /* SVM level defaults to 0.74. */ |
| spec->cur_ctl_vals[SVM_LEVEL - TUNING_CTL_START_NID] = 74; |
| |
| /* EQ defaults to 0dB. */ |
| for (i = 2; i < TUNING_CTLS_COUNT; i++) |
| spec->cur_ctl_vals[i] = 24; |
| } |
| #endif /*ENABLE_TUNING_CONTROLS*/ |
| |
| /* |
| * Select the active output. |
| * If autodetect is enabled, output will be selected based on jack detection. |
| * If jack inserted, headphone will be selected, else built-in speakers |
| * If autodetect is disabled, output will be selected based on selection. |
| */ |
| static int ca0132_select_out(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int pin_ctl; |
| int jack_present; |
| int auto_jack; |
| unsigned int tmp; |
| int err; |
| |
| codec_dbg(codec, "ca0132_select_out\n"); |
| |
| snd_hda_power_up_pm(codec); |
| |
| auto_jack = spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID]; |
| |
| if (auto_jack) |
| jack_present = snd_hda_jack_detect(codec, spec->unsol_tag_hp); |
| else |
| jack_present = |
| spec->vnode_lswitch[VNID_HP_SEL - VNODE_START_NID]; |
| |
| if (jack_present) |
| spec->cur_out_type = HEADPHONE_OUT; |
| else |
| spec->cur_out_type = SPEAKER_OUT; |
| |
| if (spec->cur_out_type == SPEAKER_OUT) { |
| codec_dbg(codec, "ca0132_select_out speaker\n"); |
| /*speaker out config*/ |
| tmp = FLOAT_ONE; |
| err = dspio_set_uint_param(codec, 0x80, 0x04, tmp); |
| if (err < 0) |
| goto exit; |
| /*enable speaker EQ*/ |
| tmp = FLOAT_ONE; |
| err = dspio_set_uint_param(codec, 0x8f, 0x00, tmp); |
| if (err < 0) |
| goto exit; |
| |
| /* Setup EAPD */ |
| snd_hda_codec_write(codec, spec->out_pins[1], 0, |
| VENDOR_CHIPIO_EAPD_SEL_SET, 0x02); |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, |
| AC_VERB_SET_EAPD_BTLENABLE, 0x00); |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, |
| VENDOR_CHIPIO_EAPD_SEL_SET, 0x00); |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, |
| AC_VERB_SET_EAPD_BTLENABLE, 0x02); |
| |
| /* disable headphone node */ |
| pin_ctl = snd_hda_codec_read(codec, spec->out_pins[1], 0, |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); |
| snd_hda_set_pin_ctl(codec, spec->out_pins[1], |
| pin_ctl & ~PIN_HP); |
| /* enable speaker node */ |
| pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0, |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); |
| snd_hda_set_pin_ctl(codec, spec->out_pins[0], |
| pin_ctl | PIN_OUT); |
| } else { |
| codec_dbg(codec, "ca0132_select_out hp\n"); |
| /*headphone out config*/ |
| tmp = FLOAT_ZERO; |
| err = dspio_set_uint_param(codec, 0x80, 0x04, tmp); |
| if (err < 0) |
| goto exit; |
| /*disable speaker EQ*/ |
| tmp = FLOAT_ZERO; |
| err = dspio_set_uint_param(codec, 0x8f, 0x00, tmp); |
| if (err < 0) |
| goto exit; |
| |
| /* Setup EAPD */ |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, |
| VENDOR_CHIPIO_EAPD_SEL_SET, 0x00); |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, |
| AC_VERB_SET_EAPD_BTLENABLE, 0x00); |
| snd_hda_codec_write(codec, spec->out_pins[1], 0, |
| VENDOR_CHIPIO_EAPD_SEL_SET, 0x02); |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, |
| AC_VERB_SET_EAPD_BTLENABLE, 0x02); |
| |
| /* disable speaker*/ |
| pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0, |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); |
| snd_hda_set_pin_ctl(codec, spec->out_pins[0], |
| pin_ctl & ~PIN_HP); |
| /* enable headphone*/ |
| pin_ctl = snd_hda_codec_read(codec, spec->out_pins[1], 0, |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); |
| snd_hda_set_pin_ctl(codec, spec->out_pins[1], |
| pin_ctl | PIN_HP); |
| } |
| |
| exit: |
| snd_hda_power_down_pm(codec); |
| |
| return err < 0 ? err : 0; |
| } |
| |
| static int ae5_headphone_gain_set(struct hda_codec *codec, long val); |
| static int zxr_headphone_gain_set(struct hda_codec *codec, long val); |
| static int ca0132_effects_set(struct hda_codec *codec, hda_nid_t nid, long val); |
| |
| static void ae5_mmio_select_out(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int i; |
| |
| for (i = 0; i < AE5_CA0113_OUT_SET_COMMANDS; i++) |
| ca0113_mmio_command_set(codec, |
| ae5_ca0113_output_presets[spec->cur_out_type].group[i], |
| ae5_ca0113_output_presets[spec->cur_out_type].target[i], |
| ae5_ca0113_output_presets[spec->cur_out_type].vals[i]); |
| } |
| |
| /* |
| * These are the commands needed to setup output on each of the different card |
| * types. |
| */ |
| static void ca0132_alt_select_out_quirk_handler(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int tmp; |
| |
| switch (spec->cur_out_type) { |
| case SPEAKER_OUT: |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| ca0113_mmio_gpio_set(codec, 7, false); |
| ca0113_mmio_gpio_set(codec, 4, true); |
| ca0113_mmio_gpio_set(codec, 1, true); |
| chipio_set_control_param(codec, 0x0d, 0x18); |
| break; |
| case QUIRK_ZXR: |
| ca0113_mmio_gpio_set(codec, 2, true); |
| ca0113_mmio_gpio_set(codec, 3, true); |
| ca0113_mmio_gpio_set(codec, 5, false); |
| zxr_headphone_gain_set(codec, 0); |
| chipio_set_control_param(codec, 0x0d, 0x24); |
| break; |
| case QUIRK_R3DI: |
| chipio_set_control_param(codec, 0x0d, 0x24); |
| r3di_gpio_out_set(codec, R3DI_LINE_OUT); |
| break; |
| case QUIRK_R3D: |
| chipio_set_control_param(codec, 0x0d, 0x24); |
| ca0113_mmio_gpio_set(codec, 1, true); |
| break; |
| case QUIRK_AE5: |
| ae5_mmio_select_out(codec); |
| ae5_headphone_gain_set(codec, 2); |
| tmp = FLOAT_ZERO; |
| dspio_set_uint_param(codec, 0x96, 0x29, tmp); |
| dspio_set_uint_param(codec, 0x96, 0x2a, tmp); |
| chipio_set_control_param(codec, 0x0d, 0xa4); |
| chipio_write(codec, 0x18b03c, 0x00000012); |
| break; |
| default: |
| break; |
| } |
| break; |
| case HEADPHONE_OUT: |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| ca0113_mmio_gpio_set(codec, 7, true); |
| ca0113_mmio_gpio_set(codec, 4, true); |
| ca0113_mmio_gpio_set(codec, 1, false); |
| chipio_set_control_param(codec, 0x0d, 0x12); |
| break; |
| case QUIRK_ZXR: |
| ca0113_mmio_gpio_set(codec, 2, false); |
| ca0113_mmio_gpio_set(codec, 3, false); |
| ca0113_mmio_gpio_set(codec, 5, true); |
| zxr_headphone_gain_set(codec, spec->zxr_gain_set); |
| chipio_set_control_param(codec, 0x0d, 0x21); |
| break; |
| case QUIRK_R3DI: |
| chipio_set_control_param(codec, 0x0d, 0x21); |
| r3di_gpio_out_set(codec, R3DI_HEADPHONE_OUT); |
| break; |
| case QUIRK_R3D: |
| chipio_set_control_param(codec, 0x0d, 0x21); |
| ca0113_mmio_gpio_set(codec, 0x1, false); |
| break; |
| case QUIRK_AE5: |
| ae5_mmio_select_out(codec); |
| ae5_headphone_gain_set(codec, |
| spec->ae5_headphone_gain_val); |
| tmp = FLOAT_ONE; |
| dspio_set_uint_param(codec, 0x96, 0x29, tmp); |
| dspio_set_uint_param(codec, 0x96, 0x2a, tmp); |
| chipio_set_control_param(codec, 0x0d, 0xa1); |
| chipio_write(codec, 0x18b03c, 0x00000012); |
| break; |
| default: |
| break; |
| } |
| break; |
| case SURROUND_OUT: |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| ca0113_mmio_gpio_set(codec, 7, false); |
| ca0113_mmio_gpio_set(codec, 4, true); |
| ca0113_mmio_gpio_set(codec, 1, true); |
| chipio_set_control_param(codec, 0x0d, 0x18); |
| break; |
| case QUIRK_ZXR: |
| ca0113_mmio_gpio_set(codec, 2, true); |
| ca0113_mmio_gpio_set(codec, 3, true); |
| ca0113_mmio_gpio_set(codec, 5, false); |
| zxr_headphone_gain_set(codec, 0); |
| chipio_set_control_param(codec, 0x0d, 0x24); |
| break; |
| case QUIRK_R3DI: |
| chipio_set_control_param(codec, 0x0d, 0x24); |
| r3di_gpio_out_set(codec, R3DI_LINE_OUT); |
| break; |
| case QUIRK_R3D: |
| ca0113_mmio_gpio_set(codec, 1, true); |
| chipio_set_control_param(codec, 0x0d, 0x24); |
| break; |
| case QUIRK_AE5: |
| ae5_mmio_select_out(codec); |
| ae5_headphone_gain_set(codec, 2); |
| tmp = FLOAT_ZERO; |
| dspio_set_uint_param(codec, 0x96, 0x29, tmp); |
| dspio_set_uint_param(codec, 0x96, 0x2a, tmp); |
| chipio_set_control_param(codec, 0x0d, 0xa4); |
| chipio_write(codec, 0x18b03c, 0x00000012); |
| break; |
| default: |
| break; |
| } |
| break; |
| } |
| } |
| |
| /* |
| * This function behaves similarly to the ca0132_select_out funciton above, |
| * except with a few differences. It adds the ability to select the current |
| * output with an enumerated control "output source" if the auto detect |
| * mute switch is set to off. If the auto detect mute switch is enabled, it |
| * will detect either headphone or lineout(SPEAKER_OUT) from jack detection. |
| * It also adds the ability to auto-detect the front headphone port. The only |
| * way to select surround is to disable auto detect, and set Surround with the |
| * enumerated control. |
| */ |
| static int ca0132_alt_select_out(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int pin_ctl; |
| int jack_present; |
| int auto_jack; |
| unsigned int i; |
| unsigned int tmp; |
| int err; |
| /* Default Headphone is rear headphone */ |
| hda_nid_t headphone_nid = spec->out_pins[1]; |
| |
| codec_dbg(codec, "%s\n", __func__); |
| |
| snd_hda_power_up_pm(codec); |
| |
| auto_jack = spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID]; |
| |
| /* |
| * If headphone rear or front is plugged in, set to headphone. |
| * If neither is plugged in, set to rear line out. Only if |
| * hp/speaker auto detect is enabled. |
| */ |
| if (auto_jack) { |
| jack_present = snd_hda_jack_detect(codec, spec->unsol_tag_hp) || |
| snd_hda_jack_detect(codec, spec->unsol_tag_front_hp); |
| |
| if (jack_present) |
| spec->cur_out_type = HEADPHONE_OUT; |
| else |
| spec->cur_out_type = SPEAKER_OUT; |
| } else |
| spec->cur_out_type = spec->out_enum_val; |
| |
| /* Begin DSP output switch */ |
| tmp = FLOAT_ONE; |
| err = dspio_set_uint_param(codec, 0x96, 0x3A, tmp); |
| if (err < 0) |
| goto exit; |
| |
| ca0132_alt_select_out_quirk_handler(codec); |
| |
| switch (spec->cur_out_type) { |
| case SPEAKER_OUT: |
| codec_dbg(codec, "%s speaker\n", __func__); |
| |
| /* disable headphone node */ |
| pin_ctl = snd_hda_codec_read(codec, spec->out_pins[1], 0, |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); |
| snd_hda_set_pin_ctl(codec, spec->out_pins[1], |
| pin_ctl & ~PIN_HP); |
| /* enable line-out node */ |
| pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0, |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); |
| snd_hda_set_pin_ctl(codec, spec->out_pins[0], |
| pin_ctl | PIN_OUT); |
| /* Enable EAPD */ |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, |
| AC_VERB_SET_EAPD_BTLENABLE, 0x01); |
| |
| /* If PlayEnhancement is enabled, set different source */ |
| if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]) |
| dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_ONE); |
| else |
| dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_EIGHT); |
| break; |
| case HEADPHONE_OUT: |
| codec_dbg(codec, "%s hp\n", __func__); |
| |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, |
| AC_VERB_SET_EAPD_BTLENABLE, 0x00); |
| |
| /* disable speaker*/ |
| pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0, |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); |
| snd_hda_set_pin_ctl(codec, spec->out_pins[0], |
| pin_ctl & ~PIN_HP); |
| |
| /* enable headphone, either front or rear */ |
| |
| if (snd_hda_jack_detect(codec, spec->unsol_tag_front_hp)) |
| headphone_nid = spec->out_pins[2]; |
| else if (snd_hda_jack_detect(codec, spec->unsol_tag_hp)) |
| headphone_nid = spec->out_pins[1]; |
| |
| pin_ctl = snd_hda_codec_read(codec, headphone_nid, 0, |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); |
| snd_hda_set_pin_ctl(codec, headphone_nid, |
| pin_ctl | PIN_HP); |
| |
| if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]) |
| dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_ONE); |
| else |
| dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_ZERO); |
| break; |
| case SURROUND_OUT: |
| codec_dbg(codec, "%s surround\n", __func__); |
| |
| /* enable line out node */ |
| pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0, |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); |
| snd_hda_set_pin_ctl(codec, spec->out_pins[0], |
| pin_ctl | PIN_OUT); |
| /* Disable headphone out */ |
| pin_ctl = snd_hda_codec_read(codec, spec->out_pins[1], 0, |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); |
| snd_hda_set_pin_ctl(codec, spec->out_pins[1], |
| pin_ctl & ~PIN_HP); |
| /* Enable EAPD on line out */ |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, |
| AC_VERB_SET_EAPD_BTLENABLE, 0x01); |
| /* enable center/lfe out node */ |
| pin_ctl = snd_hda_codec_read(codec, spec->out_pins[2], 0, |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); |
| snd_hda_set_pin_ctl(codec, spec->out_pins[2], |
| pin_ctl | PIN_OUT); |
| /* Now set rear surround node as out. */ |
| pin_ctl = snd_hda_codec_read(codec, spec->out_pins[3], 0, |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); |
| snd_hda_set_pin_ctl(codec, spec->out_pins[3], |
| pin_ctl | PIN_OUT); |
| |
| dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_EIGHT); |
| break; |
| } |
| /* |
| * Surround always sets it's scp command to req 0x04 to FLOAT_EIGHT. |
| * With this set though, X_BASS cannot be enabled. So, if we have OutFX |
| * enabled, we need to make sure X_BASS is off, otherwise everything |
| * sounds all muffled. Running ca0132_effects_set with X_BASS as the |
| * effect should sort this out. |
| */ |
| if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]) |
| ca0132_effects_set(codec, X_BASS, |
| spec->effects_switch[X_BASS - EFFECT_START_NID]); |
| |
| /* run through the output dsp commands for the selected output. */ |
| for (i = 0; i < alt_out_presets[spec->cur_out_type].commands; i++) { |
| err = dspio_set_uint_param(codec, |
| alt_out_presets[spec->cur_out_type].mids[i], |
| alt_out_presets[spec->cur_out_type].reqs[i], |
| alt_out_presets[spec->cur_out_type].vals[i]); |
| |
| if (err < 0) |
| goto exit; |
| } |
| |
| exit: |
| snd_hda_power_down_pm(codec); |
| |
| return err < 0 ? err : 0; |
| } |
| |
| static void ca0132_unsol_hp_delayed(struct work_struct *work) |
| { |
| struct ca0132_spec *spec = container_of( |
| to_delayed_work(work), struct ca0132_spec, unsol_hp_work); |
| struct hda_jack_tbl *jack; |
| |
| if (ca0132_use_alt_functions(spec)) |
| ca0132_alt_select_out(spec->codec); |
| else |
| ca0132_select_out(spec->codec); |
| |
| jack = snd_hda_jack_tbl_get(spec->codec, spec->unsol_tag_hp); |
| if (jack) { |
| jack->block_report = 0; |
| snd_hda_jack_report_sync(spec->codec); |
| } |
| } |
| |
| static void ca0132_set_dmic(struct hda_codec *codec, int enable); |
| static int ca0132_mic_boost_set(struct hda_codec *codec, long val); |
| static void resume_mic1(struct hda_codec *codec, unsigned int oldval); |
| static int stop_mic1(struct hda_codec *codec); |
| static int ca0132_cvoice_switch_set(struct hda_codec *codec); |
| static int ca0132_alt_mic_boost_set(struct hda_codec *codec, long val); |
| |
| /* |
| * Select the active VIP source |
| */ |
| static int ca0132_set_vipsource(struct hda_codec *codec, int val) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int tmp; |
| |
| if (spec->dsp_state != DSP_DOWNLOADED) |
| return 0; |
| |
| /* if CrystalVoice if off, vipsource should be 0 */ |
| if (!spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID] || |
| (val == 0)) { |
| chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, 0); |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); |
| if (spec->cur_mic_type == DIGITAL_MIC) |
| tmp = FLOAT_TWO; |
| else |
| tmp = FLOAT_ONE; |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); |
| tmp = FLOAT_ZERO; |
| dspio_set_uint_param(codec, 0x80, 0x05, tmp); |
| } else { |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_16_000); |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_16_000); |
| if (spec->cur_mic_type == DIGITAL_MIC) |
| tmp = FLOAT_TWO; |
| else |
| tmp = FLOAT_ONE; |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); |
| tmp = FLOAT_ONE; |
| dspio_set_uint_param(codec, 0x80, 0x05, tmp); |
| msleep(20); |
| chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, val); |
| } |
| |
| return 1; |
| } |
| |
| static int ca0132_alt_set_vipsource(struct hda_codec *codec, int val) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int tmp; |
| |
| if (spec->dsp_state != DSP_DOWNLOADED) |
| return 0; |
| |
| codec_dbg(codec, "%s\n", __func__); |
| |
| chipio_set_stream_control(codec, 0x03, 0); |
| chipio_set_stream_control(codec, 0x04, 0); |
| |
| /* if CrystalVoice is off, vipsource should be 0 */ |
| if (!spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID] || |
| (val == 0) || spec->in_enum_val == REAR_LINE_IN) { |
| codec_dbg(codec, "%s: off.", __func__); |
| chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, 0); |
| |
| tmp = FLOAT_ZERO; |
| dspio_set_uint_param(codec, 0x80, 0x05, tmp); |
| |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); |
| if (ca0132_quirk(spec) == QUIRK_R3DI) |
| chipio_set_conn_rate(codec, 0x0F, SR_96_000); |
| |
| |
| if (spec->in_enum_val == REAR_LINE_IN) |
| tmp = FLOAT_ZERO; |
| else { |
| if (ca0132_quirk(spec) == QUIRK_SBZ) |
| tmp = FLOAT_THREE; |
| else |
| tmp = FLOAT_ONE; |
| } |
| |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); |
| |
| } else { |
| codec_dbg(codec, "%s: on.", __func__); |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_16_000); |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_16_000); |
| if (ca0132_quirk(spec) == QUIRK_R3DI) |
| chipio_set_conn_rate(codec, 0x0F, SR_16_000); |
| |
| if (spec->effects_switch[VOICE_FOCUS - EFFECT_START_NID]) |
| tmp = FLOAT_TWO; |
| else |
| tmp = FLOAT_ONE; |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); |
| |
| tmp = FLOAT_ONE; |
| dspio_set_uint_param(codec, 0x80, 0x05, tmp); |
| |
| msleep(20); |
| chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, val); |
| } |
| |
| chipio_set_stream_control(codec, 0x03, 1); |
| chipio_set_stream_control(codec, 0x04, 1); |
| |
| return 1; |
| } |
| |
| /* |
| * Select the active microphone. |
| * If autodetect is enabled, mic will be selected based on jack detection. |
| * If jack inserted, ext.mic will be selected, else built-in mic |
| * If autodetect is disabled, mic will be selected based on selection. |
| */ |
| static int ca0132_select_mic(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int jack_present; |
| int auto_jack; |
| |
| codec_dbg(codec, "ca0132_select_mic\n"); |
| |
| snd_hda_power_up_pm(codec); |
| |
| auto_jack = spec->vnode_lswitch[VNID_AMIC1_ASEL - VNODE_START_NID]; |
| |
| if (auto_jack) |
| jack_present = snd_hda_jack_detect(codec, spec->unsol_tag_amic1); |
| else |
| jack_present = |
| spec->vnode_lswitch[VNID_AMIC1_SEL - VNODE_START_NID]; |
| |
| if (jack_present) |
| spec->cur_mic_type = LINE_MIC_IN; |
| else |
| spec->cur_mic_type = DIGITAL_MIC; |
| |
| if (spec->cur_mic_type == DIGITAL_MIC) { |
| /* enable digital Mic */ |
| chipio_set_conn_rate(codec, MEM_CONNID_DMIC, SR_32_000); |
| ca0132_set_dmic(codec, 1); |
| ca0132_mic_boost_set(codec, 0); |
| /* set voice focus */ |
| ca0132_effects_set(codec, VOICE_FOCUS, |
| spec->effects_switch |
| [VOICE_FOCUS - EFFECT_START_NID]); |
| } else { |
| /* disable digital Mic */ |
| chipio_set_conn_rate(codec, MEM_CONNID_DMIC, SR_96_000); |
| ca0132_set_dmic(codec, 0); |
| ca0132_mic_boost_set(codec, spec->cur_mic_boost); |
| /* disable voice focus */ |
| ca0132_effects_set(codec, VOICE_FOCUS, 0); |
| } |
| |
| snd_hda_power_down_pm(codec); |
| |
| return 0; |
| } |
| |
| /* |
| * Select the active input. |
| * Mic detection isn't used, because it's kind of pointless on the SBZ. |
| * The front mic has no jack-detection, so the only way to switch to it |
| * is to do it manually in alsamixer. |
| */ |
| static int ca0132_alt_select_in(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int tmp; |
| |
| codec_dbg(codec, "%s\n", __func__); |
| |
| snd_hda_power_up_pm(codec); |
| |
| chipio_set_stream_control(codec, 0x03, 0); |
| chipio_set_stream_control(codec, 0x04, 0); |
| |
| spec->cur_mic_type = spec->in_enum_val; |
| |
| switch (spec->cur_mic_type) { |
| case REAR_MIC: |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| case QUIRK_R3D: |
| ca0113_mmio_gpio_set(codec, 0, false); |
| tmp = FLOAT_THREE; |
| break; |
| case QUIRK_ZXR: |
| tmp = FLOAT_THREE; |
| break; |
| case QUIRK_R3DI: |
| r3di_gpio_mic_set(codec, R3DI_REAR_MIC); |
| tmp = FLOAT_ONE; |
| break; |
| case QUIRK_AE5: |
| ca0113_mmio_command_set(codec, 0x48, 0x28, 0x00); |
| tmp = FLOAT_THREE; |
| break; |
| default: |
| tmp = FLOAT_ONE; |
| break; |
| } |
| |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); |
| if (ca0132_quirk(spec) == QUIRK_R3DI) |
| chipio_set_conn_rate(codec, 0x0F, SR_96_000); |
| |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); |
| |
| chipio_set_stream_control(codec, 0x03, 1); |
| chipio_set_stream_control(codec, 0x04, 1); |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| chipio_write(codec, 0x18B098, 0x0000000C); |
| chipio_write(codec, 0x18B09C, 0x0000000C); |
| break; |
| case QUIRK_ZXR: |
| chipio_write(codec, 0x18B098, 0x0000000C); |
| chipio_write(codec, 0x18B09C, 0x000000CC); |
| break; |
| case QUIRK_AE5: |
| chipio_write(codec, 0x18B098, 0x0000000C); |
| chipio_write(codec, 0x18B09C, 0x0000004C); |
| break; |
| default: |
| break; |
| } |
| ca0132_alt_mic_boost_set(codec, spec->mic_boost_enum_val); |
| break; |
| case REAR_LINE_IN: |
| ca0132_mic_boost_set(codec, 0); |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| case QUIRK_R3D: |
| ca0113_mmio_gpio_set(codec, 0, false); |
| break; |
| case QUIRK_R3DI: |
| r3di_gpio_mic_set(codec, R3DI_REAR_MIC); |
| break; |
| case QUIRK_AE5: |
| ca0113_mmio_command_set(codec, 0x48, 0x28, 0x00); |
| break; |
| default: |
| break; |
| } |
| |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); |
| if (ca0132_quirk(spec) == QUIRK_R3DI) |
| chipio_set_conn_rate(codec, 0x0F, SR_96_000); |
| |
| tmp = FLOAT_ZERO; |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); |
| |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| case QUIRK_AE5: |
| chipio_write(codec, 0x18B098, 0x00000000); |
| chipio_write(codec, 0x18B09C, 0x00000000); |
| break; |
| default: |
| break; |
| } |
| chipio_set_stream_control(codec, 0x03, 1); |
| chipio_set_stream_control(codec, 0x04, 1); |
| break; |
| case FRONT_MIC: |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| case QUIRK_R3D: |
| ca0113_mmio_gpio_set(codec, 0, true); |
| ca0113_mmio_gpio_set(codec, 5, false); |
| tmp = FLOAT_THREE; |
| break; |
| case QUIRK_R3DI: |
| r3di_gpio_mic_set(codec, R3DI_FRONT_MIC); |
| tmp = FLOAT_ONE; |
| break; |
| case QUIRK_AE5: |
| ca0113_mmio_command_set(codec, 0x48, 0x28, 0x3f); |
| tmp = FLOAT_THREE; |
| break; |
| default: |
| tmp = FLOAT_ONE; |
| break; |
| } |
| |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); |
| if (ca0132_quirk(spec) == QUIRK_R3DI) |
| chipio_set_conn_rate(codec, 0x0F, SR_96_000); |
| |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); |
| |
| chipio_set_stream_control(codec, 0x03, 1); |
| chipio_set_stream_control(codec, 0x04, 1); |
| |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| chipio_write(codec, 0x18B098, 0x0000000C); |
| chipio_write(codec, 0x18B09C, 0x000000CC); |
| break; |
| case QUIRK_AE5: |
| chipio_write(codec, 0x18B098, 0x0000000C); |
| chipio_write(codec, 0x18B09C, 0x0000004C); |
| break; |
| default: |
| break; |
| } |
| ca0132_alt_mic_boost_set(codec, spec->mic_boost_enum_val); |
| break; |
| } |
| ca0132_cvoice_switch_set(codec); |
| |
| snd_hda_power_down_pm(codec); |
| return 0; |
| } |
| |
| /* |
| * Check if VNODE settings take effect immediately. |
| */ |
| static bool ca0132_is_vnode_effective(struct hda_codec *codec, |
| hda_nid_t vnid, |
| hda_nid_t *shared_nid) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid; |
| |
| switch (vnid) { |
| case VNID_SPK: |
| nid = spec->shared_out_nid; |
| break; |
| case VNID_MIC: |
| nid = spec->shared_mic_nid; |
| break; |
| default: |
| return false; |
| } |
| |
| if (shared_nid) |
| *shared_nid = nid; |
| |
| return true; |
| } |
| |
| /* |
| * The following functions are control change helpers. |
| * They return 0 if no changed. Return 1 if changed. |
| */ |
| static int ca0132_voicefx_set(struct hda_codec *codec, int enable) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int tmp; |
| |
| /* based on CrystalVoice state to enable VoiceFX. */ |
| if (enable) { |
| tmp = spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID] ? |
| FLOAT_ONE : FLOAT_ZERO; |
| } else { |
| tmp = FLOAT_ZERO; |
| } |
| |
| dspio_set_uint_param(codec, ca0132_voicefx.mid, |
| ca0132_voicefx.reqs[0], tmp); |
| |
| return 1; |
| } |
| |
| /* |
| * Set the effects parameters |
| */ |
| static int ca0132_effects_set(struct hda_codec *codec, hda_nid_t nid, long val) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int on, tmp; |
| int num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT; |
| int err = 0; |
| int idx = nid - EFFECT_START_NID; |
| |
| if ((idx < 0) || (idx >= num_fx)) |
| return 0; /* no changed */ |
| |
| /* for out effect, qualify with PE */ |
| if ((nid >= OUT_EFFECT_START_NID) && (nid < OUT_EFFECT_END_NID)) { |
| /* if PE if off, turn off out effects. */ |
| if (!spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]) |
| val = 0; |
| if (spec->cur_out_type == SURROUND_OUT && nid == X_BASS) |
| val = 0; |
| } |
| |
| /* for in effect, qualify with CrystalVoice */ |
| if ((nid >= IN_EFFECT_START_NID) && (nid < IN_EFFECT_END_NID)) { |
| /* if CrystalVoice if off, turn off in effects. */ |
| if (!spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID]) |
| val = 0; |
| |
| /* Voice Focus applies to 2-ch Mic, Digital Mic */ |
| if ((nid == VOICE_FOCUS) && (spec->cur_mic_type != DIGITAL_MIC)) |
| val = 0; |
| |
| /* If Voice Focus on SBZ, set to two channel. */ |
| if ((nid == VOICE_FOCUS) && ca0132_use_pci_mmio(spec) |
| && (spec->cur_mic_type != REAR_LINE_IN)) { |
| if (spec->effects_switch[CRYSTAL_VOICE - |
| EFFECT_START_NID]) { |
| |
| if (spec->effects_switch[VOICE_FOCUS - |
| EFFECT_START_NID]) { |
| tmp = FLOAT_TWO; |
| val = 1; |
| } else |
| tmp = FLOAT_ONE; |
| |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); |
| } |
| } |
| /* |
| * For SBZ noise reduction, there's an extra command |
| * to module ID 0x47. No clue why. |
| */ |
| if ((nid == NOISE_REDUCTION) && ca0132_use_pci_mmio(spec) |
| && (spec->cur_mic_type != REAR_LINE_IN)) { |
| if (spec->effects_switch[CRYSTAL_VOICE - |
| EFFECT_START_NID]) { |
| if (spec->effects_switch[NOISE_REDUCTION - |
| EFFECT_START_NID]) |
| tmp = FLOAT_ONE; |
| else |
| tmp = FLOAT_ZERO; |
| } else |
| tmp = FLOAT_ZERO; |
| |
| dspio_set_uint_param(codec, 0x47, 0x00, tmp); |
| } |
| |
| /* If rear line in disable effects. */ |
| if (ca0132_use_alt_functions(spec) && |
| spec->in_enum_val == REAR_LINE_IN) |
| val = 0; |
| } |
| |
| codec_dbg(codec, "ca0132_effect_set: nid=0x%x, val=%ld\n", |
| nid, val); |
| |
| on = (val == 0) ? FLOAT_ZERO : FLOAT_ONE; |
| err = dspio_set_uint_param(codec, ca0132_effects[idx].mid, |
| ca0132_effects[idx].reqs[0], on); |
| |
| if (err < 0) |
| return 0; /* no changed */ |
| |
| return 1; |
| } |
| |
| /* |
| * Turn on/off Playback Enhancements |
| */ |
| static int ca0132_pe_switch_set(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid; |
| int i, ret = 0; |
| |
| codec_dbg(codec, "ca0132_pe_switch_set: val=%ld\n", |
| spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]); |
| |
| if (ca0132_use_alt_functions(spec)) |
| ca0132_alt_select_out(codec); |
| |
| i = OUT_EFFECT_START_NID - EFFECT_START_NID; |
| nid = OUT_EFFECT_START_NID; |
| /* PE affects all out effects */ |
| for (; nid < OUT_EFFECT_END_NID; nid++, i++) |
| ret |= ca0132_effects_set(codec, nid, spec->effects_switch[i]); |
| |
| return ret; |
| } |
| |
| /* Check if Mic1 is streaming, if so, stop streaming */ |
| static int stop_mic1(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int oldval = snd_hda_codec_read(codec, spec->adcs[0], 0, |
| AC_VERB_GET_CONV, 0); |
| if (oldval != 0) |
| snd_hda_codec_write(codec, spec->adcs[0], 0, |
| AC_VERB_SET_CHANNEL_STREAMID, |
| 0); |
| return oldval; |
| } |
| |
| /* Resume Mic1 streaming if it was stopped. */ |
| static void resume_mic1(struct hda_codec *codec, unsigned int oldval) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| /* Restore the previous stream and channel */ |
| if (oldval != 0) |
| snd_hda_codec_write(codec, spec->adcs[0], 0, |
| AC_VERB_SET_CHANNEL_STREAMID, |
| oldval); |
| } |
| |
| /* |
| * Turn on/off CrystalVoice |
| */ |
| static int ca0132_cvoice_switch_set(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid; |
| int i, ret = 0; |
| unsigned int oldval; |
| |
| codec_dbg(codec, "ca0132_cvoice_switch_set: val=%ld\n", |
| spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID]); |
| |
| i = IN_EFFECT_START_NID - EFFECT_START_NID; |
| nid = IN_EFFECT_START_NID; |
| /* CrystalVoice affects all in effects */ |
| for (; nid < IN_EFFECT_END_NID; nid++, i++) |
| ret |= ca0132_effects_set(codec, nid, spec->effects_switch[i]); |
| |
| /* including VoiceFX */ |
| ret |= ca0132_voicefx_set(codec, (spec->voicefx_val ? 1 : 0)); |
| |
| /* set correct vipsource */ |
| oldval = stop_mic1(codec); |
| if (ca0132_use_alt_functions(spec)) |
| ret |= ca0132_alt_set_vipsource(codec, 1); |
| else |
| ret |= ca0132_set_vipsource(codec, 1); |
| resume_mic1(codec, oldval); |
| return ret; |
| } |
| |
| static int ca0132_mic_boost_set(struct hda_codec *codec, long val) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int ret = 0; |
| |
| if (val) /* on */ |
| ret = snd_hda_codec_amp_update(codec, spec->input_pins[0], 0, |
| HDA_INPUT, 0, HDA_AMP_VOLMASK, 3); |
| else /* off */ |
| ret = snd_hda_codec_amp_update(codec, spec->input_pins[0], 0, |
| HDA_INPUT, 0, HDA_AMP_VOLMASK, 0); |
| |
| return ret; |
| } |
| |
| static int ca0132_alt_mic_boost_set(struct hda_codec *codec, long val) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int ret = 0; |
| |
| ret = snd_hda_codec_amp_update(codec, spec->input_pins[0], 0, |
| HDA_INPUT, 0, HDA_AMP_VOLMASK, val); |
| return ret; |
| } |
| |
| static int ae5_headphone_gain_set(struct hda_codec *codec, long val) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < 4; i++) |
| ca0113_mmio_command_set(codec, 0x48, 0x11 + i, |
| ae5_headphone_gain_presets[val].vals[i]); |
| return 0; |
| } |
| |
| /* |
| * gpio pin 1 is a relay that switches on/off, apparently setting the headphone |
| * amplifier to handle a 600 ohm load. |
| */ |
| static int zxr_headphone_gain_set(struct hda_codec *codec, long val) |
| { |
| ca0113_mmio_gpio_set(codec, 1, val); |
| |
| return 0; |
| } |
| |
| static int ca0132_vnode_switch_set(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| hda_nid_t nid = get_amp_nid(kcontrol); |
| hda_nid_t shared_nid = 0; |
| bool effective; |
| int ret = 0; |
| struct ca0132_spec *spec = codec->spec; |
| int auto_jack; |
| |
| if (nid == VNID_HP_SEL) { |
| auto_jack = |
| spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID]; |
| if (!auto_jack) { |
| if (ca0132_use_alt_functions(spec)) |
| ca0132_alt_select_out(codec); |
| else |
| ca0132_select_out(codec); |
| } |
| return 1; |
| } |
| |
| if (nid == VNID_AMIC1_SEL) { |
| auto_jack = |
| spec->vnode_lswitch[VNID_AMIC1_ASEL - VNODE_START_NID]; |
| if (!auto_jack) |
| ca0132_select_mic(codec); |
| return 1; |
| } |
| |
| if (nid == VNID_HP_ASEL) { |
| if (ca0132_use_alt_functions(spec)) |
| ca0132_alt_select_out(codec); |
| else |
| ca0132_select_out(codec); |
| return 1; |
| } |
| |
| if (nid == VNID_AMIC1_ASEL) { |
| ca0132_select_mic(codec); |
| return 1; |
| } |
| |
| /* if effective conditions, then update hw immediately. */ |
| effective = ca0132_is_vnode_effective(codec, nid, &shared_nid); |
| if (effective) { |
| int dir = get_amp_direction(kcontrol); |
| int ch = get_amp_channels(kcontrol); |
| unsigned long pval; |
| |
| mutex_lock(&codec->control_mutex); |
| pval = kcontrol->private_value; |
| kcontrol->private_value = HDA_COMPOSE_AMP_VAL(shared_nid, ch, |
| 0, dir); |
| ret = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol); |
| kcontrol->private_value = pval; |
| mutex_unlock(&codec->control_mutex); |
| } |
| |
| return ret; |
| } |
| /* End of control change helpers. */ |
| /* |
| * Below I've added controls to mess with the effect levels, I've only enabled |
| * them on the Sound Blaster Z, but they would probably also work on the |
| * Chromebook. I figured they were probably tuned specifically for it, and left |
| * out for a reason. |
| */ |
| |
| /* Sets DSP effect level from the sliders above the controls */ |
| static int ca0132_alt_slider_ctl_set(struct hda_codec *codec, hda_nid_t nid, |
| const unsigned int *lookup, int idx) |
| { |
| int i = 0; |
| unsigned int y; |
| /* |
| * For X_BASS, req 2 is actually crossover freq instead of |
| * effect level |
| */ |
| if (nid == X_BASS) |
| y = 2; |
| else |
| y = 1; |
| |
| snd_hda_power_up(codec); |
| if (nid == XBASS_XOVER) { |
| for (i = 0; i < OUT_EFFECTS_COUNT; i++) |
| if (ca0132_effects[i].nid == X_BASS) |
| break; |
| |
| dspio_set_param(codec, ca0132_effects[i].mid, 0x20, |
| ca0132_effects[i].reqs[1], |
| &(lookup[idx - 1]), sizeof(unsigned int)); |
| } else { |
| /* Find the actual effect structure */ |
| for (i = 0; i < OUT_EFFECTS_COUNT; i++) |
| if (nid == ca0132_effects[i].nid) |
| break; |
| |
| dspio_set_param(codec, ca0132_effects[i].mid, 0x20, |
| ca0132_effects[i].reqs[y], |
| &(lookup[idx]), sizeof(unsigned int)); |
| } |
| |
| snd_hda_power_down(codec); |
| |
| return 0; |
| } |
| |
| static int ca0132_alt_xbass_xover_slider_ctl_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| long *valp = ucontrol->value.integer.value; |
| |
| *valp = spec->xbass_xover_freq; |
| return 0; |
| } |
| |
| static int ca0132_alt_slider_ctl_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid = get_amp_nid(kcontrol); |
| long *valp = ucontrol->value.integer.value; |
| int idx = nid - OUT_EFFECT_START_NID; |
| |
| *valp = spec->fx_ctl_val[idx]; |
| return 0; |
| } |
| |
| /* |
| * The X-bass crossover starts at 10hz, so the min is 1. The |
| * frequency is set in multiples of 10. |
| */ |
| static int ca0132_alt_xbass_xover_slider_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = 1; |
| uinfo->value.integer.min = 1; |
| uinfo->value.integer.max = 100; |
| uinfo->value.integer.step = 1; |
| |
| return 0; |
| } |
| |
| static int ca0132_alt_effect_slider_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| int chs = get_amp_channels(kcontrol); |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = chs == 3 ? 2 : 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 100; |
| uinfo->value.integer.step = 1; |
| |
| return 0; |
| } |
| |
| static int ca0132_alt_xbass_xover_slider_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid = get_amp_nid(kcontrol); |
| long *valp = ucontrol->value.integer.value; |
| int idx; |
| |
| /* any change? */ |
| if (spec->xbass_xover_freq == *valp) |
| return 0; |
| |
| spec->xbass_xover_freq = *valp; |
| |
| idx = *valp; |
| ca0132_alt_slider_ctl_set(codec, nid, float_xbass_xover_lookup, idx); |
| |
| return 0; |
| } |
| |
| static int ca0132_alt_effect_slider_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid = get_amp_nid(kcontrol); |
| long *valp = ucontrol->value.integer.value; |
| int idx; |
| |
| idx = nid - EFFECT_START_NID; |
| /* any change? */ |
| if (spec->fx_ctl_val[idx] == *valp) |
| return 0; |
| |
| spec->fx_ctl_val[idx] = *valp; |
| |
| idx = *valp; |
| ca0132_alt_slider_ctl_set(codec, nid, float_zero_to_one_lookup, idx); |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Mic Boost Enum for alternative ca0132 codecs. I didn't like that the original |
| * only has off or full 30 dB, and didn't like making a volume slider that has |
| * traditional 0-100 in alsamixer that goes in big steps. I like enum better. |
| */ |
| #define MIC_BOOST_NUM_OF_STEPS 4 |
| #define MIC_BOOST_ENUM_MAX_STRLEN 10 |
| |
| static int ca0132_alt_mic_boost_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| char *sfx = "dB"; |
| char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = MIC_BOOST_NUM_OF_STEPS; |
| if (uinfo->value.enumerated.item >= MIC_BOOST_NUM_OF_STEPS) |
| uinfo->value.enumerated.item = MIC_BOOST_NUM_OF_STEPS - 1; |
| sprintf(namestr, "%d %s", (uinfo->value.enumerated.item * 10), sfx); |
| strcpy(uinfo->value.enumerated.name, namestr); |
| return 0; |
| } |
| |
| static int ca0132_alt_mic_boost_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| |
| ucontrol->value.enumerated.item[0] = spec->mic_boost_enum_val; |
| return 0; |
| } |
| |
| static int ca0132_alt_mic_boost_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| int sel = ucontrol->value.enumerated.item[0]; |
| unsigned int items = MIC_BOOST_NUM_OF_STEPS; |
| |
| if (sel >= items) |
| return 0; |
| |
| codec_dbg(codec, "ca0132_alt_mic_boost: boost=%d\n", |
| sel); |
| |
| spec->mic_boost_enum_val = sel; |
| |
| if (spec->in_enum_val != REAR_LINE_IN) |
| ca0132_alt_mic_boost_set(codec, spec->mic_boost_enum_val); |
| |
| return 1; |
| } |
| |
| /* |
| * Sound BlasterX AE-5 Headphone Gain Controls. |
| */ |
| #define AE5_HEADPHONE_GAIN_MAX 3 |
| static int ae5_headphone_gain_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| char *sfx = " Ohms)"; |
| char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = AE5_HEADPHONE_GAIN_MAX; |
| if (uinfo->value.enumerated.item >= AE5_HEADPHONE_GAIN_MAX) |
| uinfo->value.enumerated.item = AE5_HEADPHONE_GAIN_MAX - 1; |
| sprintf(namestr, "%s %s", |
| ae5_headphone_gain_presets[uinfo->value.enumerated.item].name, |
| sfx); |
| strcpy(uinfo->value.enumerated.name, namestr); |
| return 0; |
| } |
| |
| static int ae5_headphone_gain_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| |
| ucontrol->value.enumerated.item[0] = spec->ae5_headphone_gain_val; |
| return 0; |
| } |
| |
| static int ae5_headphone_gain_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| int sel = ucontrol->value.enumerated.item[0]; |
| unsigned int items = AE5_HEADPHONE_GAIN_MAX; |
| |
| if (sel >= items) |
| return 0; |
| |
| codec_dbg(codec, "ae5_headphone_gain: boost=%d\n", |
| sel); |
| |
| spec->ae5_headphone_gain_val = sel; |
| |
| if (spec->out_enum_val == HEADPHONE_OUT) |
| ae5_headphone_gain_set(codec, spec->ae5_headphone_gain_val); |
| |
| return 1; |
| } |
| |
| /* |
| * Sound BlasterX AE-5 sound filter enumerated control. |
| */ |
| #define AE5_SOUND_FILTER_MAX 3 |
| |
| static int ae5_sound_filter_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = AE5_SOUND_FILTER_MAX; |
| if (uinfo->value.enumerated.item >= AE5_SOUND_FILTER_MAX) |
| uinfo->value.enumerated.item = AE5_SOUND_FILTER_MAX - 1; |
| sprintf(namestr, "%s", |
| ae5_filter_presets[uinfo->value.enumerated.item].name); |
| strcpy(uinfo->value.enumerated.name, namestr); |
| return 0; |
| } |
| |
| static int ae5_sound_filter_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| |
| ucontrol->value.enumerated.item[0] = spec->ae5_filter_val; |
| return 0; |
| } |
| |
| static int ae5_sound_filter_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| int sel = ucontrol->value.enumerated.item[0]; |
| unsigned int items = AE5_SOUND_FILTER_MAX; |
| |
| if (sel >= items) |
| return 0; |
| |
| codec_dbg(codec, "ae5_sound_filter: %s\n", |
| ae5_filter_presets[sel].name); |
| |
| spec->ae5_filter_val = sel; |
| |
| ca0113_mmio_command_set_type2(codec, 0x48, 0x07, |
| ae5_filter_presets[sel].val); |
| |
| return 1; |
| } |
| |
| /* |
| * Input Select Control for alternative ca0132 codecs. This exists because |
| * front microphone has no auto-detect, and we need a way to set the rear |
| * as line-in |
| */ |
| static int ca0132_alt_input_source_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = IN_SRC_NUM_OF_INPUTS; |
| if (uinfo->value.enumerated.item >= IN_SRC_NUM_OF_INPUTS) |
| uinfo->value.enumerated.item = IN_SRC_NUM_OF_INPUTS - 1; |
| strcpy(uinfo->value.enumerated.name, |
| in_src_str[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int ca0132_alt_input_source_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| |
| ucontrol->value.enumerated.item[0] = spec->in_enum_val; |
| return 0; |
| } |
| |
| static int ca0132_alt_input_source_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| int sel = ucontrol->value.enumerated.item[0]; |
| unsigned int items = IN_SRC_NUM_OF_INPUTS; |
| |
| if (sel >= items) |
| return 0; |
| |
| codec_dbg(codec, "ca0132_alt_input_select: sel=%d, preset=%s\n", |
| sel, in_src_str[sel]); |
| |
| spec->in_enum_val = sel; |
| |
| ca0132_alt_select_in(codec); |
| |
| return 1; |
| } |
| |
| /* Sound Blaster Z Output Select Control */ |
| static int ca0132_alt_output_select_get_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = NUM_OF_OUTPUTS; |
| if (uinfo->value.enumerated.item >= NUM_OF_OUTPUTS) |
| uinfo->value.enumerated.item = NUM_OF_OUTPUTS - 1; |
| strcpy(uinfo->value.enumerated.name, |
| alt_out_presets[uinfo->value.enumerated.item].name); |
| return 0; |
| } |
| |
| static int ca0132_alt_output_select_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| |
| ucontrol->value.enumerated.item[0] = spec->out_enum_val; |
| return 0; |
| } |
| |
| static int ca0132_alt_output_select_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| int sel = ucontrol->value.enumerated.item[0]; |
| unsigned int items = NUM_OF_OUTPUTS; |
| unsigned int auto_jack; |
| |
| if (sel >= items) |
| return 0; |
| |
| codec_dbg(codec, "ca0132_alt_output_select: sel=%d, preset=%s\n", |
| sel, alt_out_presets[sel].name); |
| |
| spec->out_enum_val = sel; |
| |
| auto_jack = spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID]; |
| |
| if (!auto_jack) |
| ca0132_alt_select_out(codec); |
| |
| return 1; |
| } |
| |
| /* |
| * Smart Volume output setting control. Three different settings, Normal, |
| * which takes the value from the smart volume slider. The two others, loud |
| * and night, disregard the slider value and have uneditable values. |
| */ |
| #define NUM_OF_SVM_SETTINGS 3 |
| static const char *const out_svm_set_enum_str[3] = {"Normal", "Loud", "Night" }; |
| |
| static int ca0132_alt_svm_setting_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = NUM_OF_SVM_SETTINGS; |
| if (uinfo->value.enumerated.item >= NUM_OF_SVM_SETTINGS) |
| uinfo->value.enumerated.item = NUM_OF_SVM_SETTINGS - 1; |
| strcpy(uinfo->value.enumerated.name, |
| out_svm_set_enum_str[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int ca0132_alt_svm_setting_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| |
| ucontrol->value.enumerated.item[0] = spec->smart_volume_setting; |
| return 0; |
| } |
| |
| static int ca0132_alt_svm_setting_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| int sel = ucontrol->value.enumerated.item[0]; |
| unsigned int items = NUM_OF_SVM_SETTINGS; |
| unsigned int idx = SMART_VOLUME - EFFECT_START_NID; |
| unsigned int tmp; |
| |
| if (sel >= items) |
| return 0; |
| |
| codec_dbg(codec, "ca0132_alt_svm_setting: sel=%d, preset=%s\n", |
| sel, out_svm_set_enum_str[sel]); |
| |
| spec->smart_volume_setting = sel; |
| |
| switch (sel) { |
| case 0: |
| tmp = FLOAT_ZERO; |
| break; |
| case 1: |
| tmp = FLOAT_ONE; |
| break; |
| case 2: |
| tmp = FLOAT_TWO; |
| break; |
| default: |
| tmp = FLOAT_ZERO; |
| break; |
| } |
| /* Req 2 is the Smart Volume Setting req. */ |
| dspio_set_uint_param(codec, ca0132_effects[idx].mid, |
| ca0132_effects[idx].reqs[2], tmp); |
| return 1; |
| } |
| |
| /* Sound Blaster Z EQ preset controls */ |
| static int ca0132_alt_eq_preset_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| unsigned int items = ARRAY_SIZE(ca0132_alt_eq_presets); |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = items; |
| if (uinfo->value.enumerated.item >= items) |
| uinfo->value.enumerated.item = items - 1; |
| strcpy(uinfo->value.enumerated.name, |
| ca0132_alt_eq_presets[uinfo->value.enumerated.item].name); |
| return 0; |
| } |
| |
| static int ca0132_alt_eq_preset_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| |
| ucontrol->value.enumerated.item[0] = spec->eq_preset_val; |
| return 0; |
| } |
| |
| static int ca0132_alt_eq_preset_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| int i, err = 0; |
| int sel = ucontrol->value.enumerated.item[0]; |
| unsigned int items = ARRAY_SIZE(ca0132_alt_eq_presets); |
| |
| if (sel >= items) |
| return 0; |
| |
| codec_dbg(codec, "%s: sel=%d, preset=%s\n", __func__, sel, |
| ca0132_alt_eq_presets[sel].name); |
| /* |
| * Idx 0 is default. |
| * Default needs to qualify with CrystalVoice state. |
| */ |
| for (i = 0; i < EQ_PRESET_MAX_PARAM_COUNT; i++) { |
| err = dspio_set_uint_param(codec, ca0132_alt_eq_enum.mid, |
| ca0132_alt_eq_enum.reqs[i], |
| ca0132_alt_eq_presets[sel].vals[i]); |
| if (err < 0) |
| break; |
| } |
| |
| if (err >= 0) |
| spec->eq_preset_val = sel; |
| |
| return 1; |
| } |
| |
| static int ca0132_voicefx_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| unsigned int items = ARRAY_SIZE(ca0132_voicefx_presets); |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = items; |
| if (uinfo->value.enumerated.item >= items) |
| uinfo->value.enumerated.item = items - 1; |
| strcpy(uinfo->value.enumerated.name, |
| ca0132_voicefx_presets[uinfo->value.enumerated.item].name); |
| return 0; |
| } |
| |
| static int ca0132_voicefx_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| |
| ucontrol->value.enumerated.item[0] = spec->voicefx_val; |
| return 0; |
| } |
| |
| static int ca0132_voicefx_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| int i, err = 0; |
| int sel = ucontrol->value.enumerated.item[0]; |
| |
| if (sel >= ARRAY_SIZE(ca0132_voicefx_presets)) |
| return 0; |
| |
| codec_dbg(codec, "ca0132_voicefx_put: sel=%d, preset=%s\n", |
| sel, ca0132_voicefx_presets[sel].name); |
| |
| /* |
| * Idx 0 is default. |
| * Default needs to qualify with CrystalVoice state. |
| */ |
| for (i = 0; i < VOICEFX_MAX_PARAM_COUNT; i++) { |
| err = dspio_set_uint_param(codec, ca0132_voicefx.mid, |
| ca0132_voicefx.reqs[i], |
| ca0132_voicefx_presets[sel].vals[i]); |
| if (err < 0) |
| break; |
| } |
| |
| if (err >= 0) { |
| spec->voicefx_val = sel; |
| /* enable voice fx */ |
| ca0132_voicefx_set(codec, (sel ? 1 : 0)); |
| } |
| |
| return 1; |
| } |
| |
| static int ca0132_switch_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid = get_amp_nid(kcontrol); |
| int ch = get_amp_channels(kcontrol); |
| long *valp = ucontrol->value.integer.value; |
| |
| /* vnode */ |
| if ((nid >= VNODE_START_NID) && (nid < VNODE_END_NID)) { |
| if (ch & 1) { |
| *valp = spec->vnode_lswitch[nid - VNODE_START_NID]; |
| valp++; |
| } |
| if (ch & 2) { |
| *valp = spec->vnode_rswitch[nid - VNODE_START_NID]; |
| valp++; |
| } |
| return 0; |
| } |
| |
| /* effects, include PE and CrystalVoice */ |
| if ((nid >= EFFECT_START_NID) && (nid < EFFECT_END_NID)) { |
| *valp = spec->effects_switch[nid - EFFECT_START_NID]; |
| return 0; |
| } |
| |
| /* mic boost */ |
| if (nid == spec->input_pins[0]) { |
| *valp = spec->cur_mic_boost; |
| return 0; |
| } |
| |
| return 0; |
| } |
| |
| static int ca0132_switch_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid = get_amp_nid(kcontrol); |
| int ch = get_amp_channels(kcontrol); |
| long *valp = ucontrol->value.integer.value; |
| int changed = 1; |
| |
| codec_dbg(codec, "ca0132_switch_put: nid=0x%x, val=%ld\n", |
| nid, *valp); |
| |
| snd_hda_power_up(codec); |
| /* vnode */ |
| if ((nid >= VNODE_START_NID) && (nid < VNODE_END_NID)) { |
| if (ch & 1) { |
| spec->vnode_lswitch[nid - VNODE_START_NID] = *valp; |
| valp++; |
| } |
| if (ch & 2) { |
| spec->vnode_rswitch[nid - VNODE_START_NID] = *valp; |
| valp++; |
| } |
| changed = ca0132_vnode_switch_set(kcontrol, ucontrol); |
| goto exit; |
| } |
| |
| /* PE */ |
| if (nid == PLAY_ENHANCEMENT) { |
| spec->effects_switch[nid - EFFECT_START_NID] = *valp; |
| changed = ca0132_pe_switch_set(codec); |
| goto exit; |
| } |
| |
| /* CrystalVoice */ |
| if (nid == CRYSTAL_VOICE) { |
| spec->effects_switch[nid - EFFECT_START_NID] = *valp; |
| changed = ca0132_cvoice_switch_set(codec); |
| goto exit; |
| } |
| |
| /* out and in effects */ |
| if (((nid >= OUT_EFFECT_START_NID) && (nid < OUT_EFFECT_END_NID)) || |
| ((nid >= IN_EFFECT_START_NID) && (nid < IN_EFFECT_END_NID))) { |
| spec->effects_switch[nid - EFFECT_START_NID] = *valp; |
| changed = ca0132_effects_set(codec, nid, *valp); |
| goto exit; |
| } |
| |
| /* mic boost */ |
| if (nid == spec->input_pins[0]) { |
| spec->cur_mic_boost = *valp; |
| if (ca0132_use_alt_functions(spec)) { |
| if (spec->in_enum_val != REAR_LINE_IN) |
| changed = ca0132_mic_boost_set(codec, *valp); |
| } else { |
| /* Mic boost does not apply to Digital Mic */ |
| if (spec->cur_mic_type != DIGITAL_MIC) |
| changed = ca0132_mic_boost_set(codec, *valp); |
| } |
| |
| goto exit; |
| } |
| |
| if (nid == ZXR_HEADPHONE_GAIN) { |
| spec->zxr_gain_set = *valp; |
| if (spec->cur_out_type == HEADPHONE_OUT) |
| changed = zxr_headphone_gain_set(codec, *valp); |
| else |
| changed = 0; |
| |
| goto exit; |
| } |
| |
| exit: |
| snd_hda_power_down(codec); |
| return changed; |
| } |
| |
| /* |
| * Volume related |
| */ |
| /* |
| * Sets the internal DSP decibel level to match the DAC for output, and the |
| * ADC for input. Currently only the SBZ sets dsp capture volume level, and |
| * all alternative codecs set DSP playback volume. |
| */ |
| static void ca0132_alt_dsp_volume_put(struct hda_codec *codec, hda_nid_t nid) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int dsp_dir; |
| unsigned int lookup_val; |
| |
| if (nid == VNID_SPK) |
| dsp_dir = DSP_VOL_OUT; |
| else |
| dsp_dir = DSP_VOL_IN; |
| |
| lookup_val = spec->vnode_lvol[nid - VNODE_START_NID]; |
| |
| dspio_set_uint_param(codec, |
| ca0132_alt_vol_ctls[dsp_dir].mid, |
| ca0132_alt_vol_ctls[dsp_dir].reqs[0], |
| float_vol_db_lookup[lookup_val]); |
| |
| lookup_val = spec->vnode_rvol[nid - VNODE_START_NID]; |
| |
| dspio_set_uint_param(codec, |
| ca0132_alt_vol_ctls[dsp_dir].mid, |
| ca0132_alt_vol_ctls[dsp_dir].reqs[1], |
| float_vol_db_lookup[lookup_val]); |
| |
| dspio_set_uint_param(codec, |
| ca0132_alt_vol_ctls[dsp_dir].mid, |
| ca0132_alt_vol_ctls[dsp_dir].reqs[2], FLOAT_ZERO); |
| } |
| |
| static int ca0132_volume_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid = get_amp_nid(kcontrol); |
| int ch = get_amp_channels(kcontrol); |
| int dir = get_amp_direction(kcontrol); |
| unsigned long pval; |
| int err; |
| |
| switch (nid) { |
| case VNID_SPK: |
| /* follow shared_out info */ |
| nid = spec->shared_out_nid; |
| mutex_lock(&codec->control_mutex); |
| pval = kcontrol->private_value; |
| kcontrol->private_value = HDA_COMPOSE_AMP_VAL(nid, ch, 0, dir); |
| err = snd_hda_mixer_amp_volume_info(kcontrol, uinfo); |
| kcontrol->private_value = pval; |
| mutex_unlock(&codec->control_mutex); |
| break; |
| case VNID_MIC: |
| /* follow shared_mic info */ |
| nid = spec->shared_mic_nid; |
| mutex_lock(&codec->control_mutex); |
| pval = kcontrol->private_value; |
| kcontrol->private_value = HDA_COMPOSE_AMP_VAL(nid, ch, 0, dir); |
| err = snd_hda_mixer_amp_volume_info(kcontrol, uinfo); |
| kcontrol->private_value = pval; |
| mutex_unlock(&codec->control_mutex); |
| break; |
| default: |
| err = snd_hda_mixer_amp_volume_info(kcontrol, uinfo); |
| } |
| return err; |
| } |
| |
| static int ca0132_volume_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid = get_amp_nid(kcontrol); |
| int ch = get_amp_channels(kcontrol); |
| long *valp = ucontrol->value.integer.value; |
| |
| /* store the left and right volume */ |
| if (ch & 1) { |
| *valp = spec->vnode_lvol[nid - VNODE_START_NID]; |
| valp++; |
| } |
| if (ch & 2) { |
| *valp = spec->vnode_rvol[nid - VNODE_START_NID]; |
| valp++; |
| } |
| return 0; |
| } |
| |
| static int ca0132_volume_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid = get_amp_nid(kcontrol); |
| int ch = get_amp_channels(kcontrol); |
| long *valp = ucontrol->value.integer.value; |
| hda_nid_t shared_nid = 0; |
| bool effective; |
| int changed = 1; |
| |
| /* store the left and right volume */ |
| if (ch & 1) { |
| spec->vnode_lvol[nid - VNODE_START_NID] = *valp; |
| valp++; |
| } |
| if (ch & 2) { |
| spec->vnode_rvol[nid - VNODE_START_NID] = *valp; |
| valp++; |
| } |
| |
| /* if effective conditions, then update hw immediately. */ |
| effective = ca0132_is_vnode_effective(codec, nid, &shared_nid); |
| if (effective) { |
| int dir = get_amp_direction(kcontrol); |
| unsigned long pval; |
| |
| snd_hda_power_up(codec); |
| mutex_lock(&codec->control_mutex); |
| pval = kcontrol->private_value; |
| kcontrol->private_value = HDA_COMPOSE_AMP_VAL(shared_nid, ch, |
| 0, dir); |
| changed = snd_hda_mixer_amp_volume_put(kcontrol, ucontrol); |
| kcontrol->private_value = pval; |
| mutex_unlock(&codec->control_mutex); |
| snd_hda_power_down(codec); |
| } |
| |
| return changed; |
| } |
| |
| /* |
| * This function is the same as the one above, because using an if statement |
| * inside of the above volume control for the DSP volume would cause too much |
| * lag. This is a lot more smooth. |
| */ |
| static int ca0132_alt_volume_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid = get_amp_nid(kcontrol); |
| int ch = get_amp_channels(kcontrol); |
| long *valp = ucontrol->value.integer.value; |
| hda_nid_t vnid = 0; |
| int changed; |
| |
| switch (nid) { |
| case 0x02: |
| vnid = VNID_SPK; |
| break; |
| case 0x07: |
| vnid = VNID_MIC; |
| break; |
| } |
| |
| /* store the left and right volume */ |
| if (ch & 1) { |
| spec->vnode_lvol[vnid - VNODE_START_NID] = *valp; |
| valp++; |
| } |
| if (ch & 2) { |
| spec->vnode_rvol[vnid - VNODE_START_NID] = *valp; |
| valp++; |
| } |
| |
| snd_hda_power_up(codec); |
| ca0132_alt_dsp_volume_put(codec, vnid); |
| mutex_lock(&codec->control_mutex); |
| changed = snd_hda_mixer_amp_volume_put(kcontrol, ucontrol); |
| mutex_unlock(&codec->control_mutex); |
| snd_hda_power_down(codec); |
| |
| return changed; |
| } |
| |
| static int ca0132_volume_tlv(struct snd_kcontrol *kcontrol, int op_flag, |
| unsigned int size, unsigned int __user *tlv) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct ca0132_spec *spec = codec->spec; |
| hda_nid_t nid = get_amp_nid(kcontrol); |
| int ch = get_amp_channels(kcontrol); |
| int dir = get_amp_direction(kcontrol); |
| unsigned long pval; |
| int err; |
| |
| switch (nid) { |
| case VNID_SPK: |
| /* follow shared_out tlv */ |
| nid = spec->shared_out_nid; |
| mutex_lock(&codec->control_mutex); |
| pval = kcontrol->private_value; |
| kcontrol->private_value = HDA_COMPOSE_AMP_VAL(nid, ch, 0, dir); |
| err = snd_hda_mixer_amp_tlv(kcontrol, op_flag, size, tlv); |
| kcontrol->private_value = pval; |
| mutex_unlock(&codec->control_mutex); |
| break; |
| case VNID_MIC: |
| /* follow shared_mic tlv */ |
| nid = spec->shared_mic_nid; |
| mutex_lock(&codec->control_mutex); |
| pval = kcontrol->private_value; |
| kcontrol->private_value = HDA_COMPOSE_AMP_VAL(nid, ch, 0, dir); |
| err = snd_hda_mixer_amp_tlv(kcontrol, op_flag, size, tlv); |
| kcontrol->private_value = pval; |
| mutex_unlock(&codec->control_mutex); |
| break; |
| default: |
| err = snd_hda_mixer_amp_tlv(kcontrol, op_flag, size, tlv); |
| } |
| return err; |
| } |
| |
| /* Add volume slider control for effect level */ |
| static int ca0132_alt_add_effect_slider(struct hda_codec *codec, hda_nid_t nid, |
| const char *pfx, int dir) |
| { |
| char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; |
| int type = dir ? HDA_INPUT : HDA_OUTPUT; |
| struct snd_kcontrol_new knew = |
| HDA_CODEC_VOLUME_MONO(namestr, nid, 1, 0, type); |
| |
| sprintf(namestr, "FX: %s %s Volume", pfx, dirstr[dir]); |
| |
| knew.tlv.c = NULL; |
| |
| switch (nid) { |
| case XBASS_XOVER: |
| knew.info = ca0132_alt_xbass_xover_slider_info; |
| knew.get = ca0132_alt_xbass_xover_slider_ctl_get; |
| knew.put = ca0132_alt_xbass_xover_slider_put; |
| break; |
| default: |
| knew.info = ca0132_alt_effect_slider_info; |
| knew.get = ca0132_alt_slider_ctl_get; |
| knew.put = ca0132_alt_effect_slider_put; |
| knew.private_value = |
| HDA_COMPOSE_AMP_VAL(nid, 1, 0, type); |
| break; |
| } |
| |
| return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec)); |
| } |
| |
| /* |
| * Added FX: prefix for the alternative codecs, because otherwise the surround |
| * effect would conflict with the Surround sound volume control. Also seems more |
| * clear as to what the switches do. Left alone for others. |
| */ |
| static int add_fx_switch(struct hda_codec *codec, hda_nid_t nid, |
| const char *pfx, int dir) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; |
| int type = dir ? HDA_INPUT : HDA_OUTPUT; |
| struct snd_kcontrol_new knew = |
| CA0132_CODEC_MUTE_MONO(namestr, nid, 1, type); |
| /* If using alt_controls, add FX: prefix. But, don't add FX: |
| * prefix to OutFX or InFX enable controls. |
| */ |
| if (ca0132_use_alt_controls(spec) && (nid <= IN_EFFECT_END_NID)) |
| sprintf(namestr, "FX: %s %s Switch", pfx, dirstr[dir]); |
| else |
| sprintf(namestr, "%s %s Switch", pfx, dirstr[dir]); |
| |
| return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec)); |
| } |
| |
| static int add_voicefx(struct hda_codec *codec) |
| { |
| struct snd_kcontrol_new knew = |
| HDA_CODEC_MUTE_MONO(ca0132_voicefx.name, |
| VOICEFX, 1, 0, HDA_INPUT); |
| knew.info = ca0132_voicefx_info; |
| knew.get = ca0132_voicefx_get; |
| knew.put = ca0132_voicefx_put; |
| return snd_hda_ctl_add(codec, VOICEFX, snd_ctl_new1(&knew, codec)); |
| } |
| |
| /* Create the EQ Preset control */ |
| static int add_ca0132_alt_eq_presets(struct hda_codec *codec) |
| { |
| struct snd_kcontrol_new knew = |
| HDA_CODEC_MUTE_MONO(ca0132_alt_eq_enum.name, |
| EQ_PRESET_ENUM, 1, 0, HDA_OUTPUT); |
| knew.info = ca0132_alt_eq_preset_info; |
| knew.get = ca0132_alt_eq_preset_get; |
| knew.put = ca0132_alt_eq_preset_put; |
| return snd_hda_ctl_add(codec, EQ_PRESET_ENUM, |
| snd_ctl_new1(&knew, codec)); |
| } |
| |
| /* |
| * Add enumerated control for the three different settings of the smart volume |
| * output effect. Normal just uses the slider value, and loud and night are |
| * their own things that ignore that value. |
| */ |
| static int ca0132_alt_add_svm_enum(struct hda_codec *codec) |
| { |
| struct snd_kcontrol_new knew = |
| HDA_CODEC_MUTE_MONO("FX: Smart Volume Setting", |
| SMART_VOLUME_ENUM, 1, 0, HDA_OUTPUT); |
| knew.info = ca0132_alt_svm_setting_info; |
| knew.get = ca0132_alt_svm_setting_get; |
| knew.put = ca0132_alt_svm_setting_put; |
| return snd_hda_ctl_add(codec, SMART_VOLUME_ENUM, |
| snd_ctl_new1(&knew, codec)); |
| |
| } |
| |
| /* |
| * Create an Output Select enumerated control for codecs with surround |
| * out capabilities. |
| */ |
| static int ca0132_alt_add_output_enum(struct hda_codec *codec) |
| { |
| struct snd_kcontrol_new knew = |
| HDA_CODEC_MUTE_MONO("Output Select", |
| OUTPUT_SOURCE_ENUM, 1, 0, HDA_OUTPUT); |
| knew.info = ca0132_alt_output_select_get_info; |
| knew.get = ca0132_alt_output_select_get; |
| knew.put = ca0132_alt_output_select_put; |
| return snd_hda_ctl_add(codec, OUTPUT_SOURCE_ENUM, |
| snd_ctl_new1(&knew, codec)); |
| } |
| |
| /* |
| * Create an Input Source enumerated control for the alternate ca0132 codecs |
| * because the front microphone has no auto-detect, and Line-in has to be set |
| * somehow. |
| */ |
| static int ca0132_alt_add_input_enum(struct hda_codec *codec) |
| { |
| struct snd_kcontrol_new knew = |
| HDA_CODEC_MUTE_MONO("Input Source", |
| INPUT_SOURCE_ENUM, 1, 0, HDA_INPUT); |
| knew.info = ca0132_alt_input_source_info; |
| knew.get = ca0132_alt_input_source_get; |
| knew.put = ca0132_alt_input_source_put; |
| return snd_hda_ctl_add(codec, INPUT_SOURCE_ENUM, |
| snd_ctl_new1(&knew, codec)); |
| } |
| |
| /* |
| * Add mic boost enumerated control. Switches through 0dB to 30dB. This adds |
| * more control than the original mic boost, which is either full 30dB or off. |
| */ |
| static int ca0132_alt_add_mic_boost_enum(struct hda_codec *codec) |
| { |
| struct snd_kcontrol_new knew = |
| HDA_CODEC_MUTE_MONO("Mic Boost Capture Switch", |
| MIC_BOOST_ENUM, 1, 0, HDA_INPUT); |
| knew.info = ca0132_alt_mic_boost_info; |
| knew.get = ca0132_alt_mic_boost_get; |
| knew.put = ca0132_alt_mic_boost_put; |
| return snd_hda_ctl_add(codec, MIC_BOOST_ENUM, |
| snd_ctl_new1(&knew, codec)); |
| |
| } |
| |
| /* |
| * Add headphone gain enumerated control for the AE-5. This switches between |
| * three modes, low, medium, and high. When non-headphone outputs are selected, |
| * it is automatically set to high. This is the same behavior as Windows. |
| */ |
| static int ae5_add_headphone_gain_enum(struct hda_codec *codec) |
| { |
| struct snd_kcontrol_new knew = |
| HDA_CODEC_MUTE_MONO("AE-5: Headphone Gain", |
| AE5_HEADPHONE_GAIN_ENUM, 1, 0, HDA_OUTPUT); |
| knew.info = ae5_headphone_gain_info; |
| knew.get = ae5_headphone_gain_get; |
| knew.put = ae5_headphone_gain_put; |
| return snd_hda_ctl_add(codec, AE5_HEADPHONE_GAIN_ENUM, |
| snd_ctl_new1(&knew, codec)); |
| } |
| |
| /* |
| * Add sound filter enumerated control for the AE-5. This adds three different |
| * settings: Slow Roll Off, Minimum Phase, and Fast Roll Off. From what I've |
| * read into it, it changes the DAC's interpolation filter. |
| */ |
| static int ae5_add_sound_filter_enum(struct hda_codec *codec) |
| { |
| struct snd_kcontrol_new knew = |
| HDA_CODEC_MUTE_MONO("AE-5: Sound Filter", |
| AE5_SOUND_FILTER_ENUM, 1, 0, HDA_OUTPUT); |
| knew.info = ae5_sound_filter_info; |
| knew.get = ae5_sound_filter_get; |
| knew.put = ae5_sound_filter_put; |
| return snd_hda_ctl_add(codec, AE5_SOUND_FILTER_ENUM, |
| snd_ctl_new1(&knew, codec)); |
| } |
| |
| static int zxr_add_headphone_gain_switch(struct hda_codec *codec) |
| { |
| struct snd_kcontrol_new knew = |
| CA0132_CODEC_MUTE_MONO("ZxR: 600 Ohm Gain", |
| ZXR_HEADPHONE_GAIN, 1, HDA_OUTPUT); |
| |
| return snd_hda_ctl_add(codec, ZXR_HEADPHONE_GAIN, |
| snd_ctl_new1(&knew, codec)); |
| } |
| |
| /* |
| * Need to create slave controls for the alternate codecs that have surround |
| * capabilities. |
| */ |
| static const char * const ca0132_alt_slave_pfxs[] = { |
| "Front", "Surround", "Center", "LFE", NULL, |
| }; |
| |
| /* |
| * Also need special channel map, because the default one is incorrect. |
| * I think this has to do with the pin for rear surround being 0x11, |
| * and the center/lfe being 0x10. Usually the pin order is the opposite. |
| */ |
| static const struct snd_pcm_chmap_elem ca0132_alt_chmaps[] = { |
| { .channels = 2, |
| .map = { SNDRV_CHMAP_FL, SNDRV_CHMAP_FR } }, |
| { .channels = 4, |
| .map = { SNDRV_CHMAP_FL, SNDRV_CHMAP_FR, |
| SNDRV_CHMAP_RL, SNDRV_CHMAP_RR } }, |
| { .channels = 6, |
| .map = { SNDRV_CHMAP_FL, SNDRV_CHMAP_FR, |
| SNDRV_CHMAP_FC, SNDRV_CHMAP_LFE, |
| SNDRV_CHMAP_RL, SNDRV_CHMAP_RR } }, |
| { } |
| }; |
| |
| /* Add the correct chmap for streams with 6 channels. */ |
| static void ca0132_alt_add_chmap_ctls(struct hda_codec *codec) |
| { |
| int err = 0; |
| struct hda_pcm *pcm; |
| |
| list_for_each_entry(pcm, &codec->pcm_list_head, list) { |
| struct hda_pcm_stream *hinfo = |
| &pcm->stream[SNDRV_PCM_STREAM_PLAYBACK]; |
| struct snd_pcm_chmap *chmap; |
| const struct snd_pcm_chmap_elem *elem; |
| |
| elem = ca0132_alt_chmaps; |
| if (hinfo->channels_max == 6) { |
| err = snd_pcm_add_chmap_ctls(pcm->pcm, |
| SNDRV_PCM_STREAM_PLAYBACK, |
| elem, hinfo->channels_max, 0, &chmap); |
| if (err < 0) |
| codec_dbg(codec, "snd_pcm_add_chmap_ctls failed!"); |
| } |
| } |
| } |
| |
| /* |
| * When changing Node IDs for Mixer Controls below, make sure to update |
| * Node IDs in ca0132_config() as well. |
| */ |
| static const struct snd_kcontrol_new ca0132_mixer[] = { |
| CA0132_CODEC_VOL("Master Playback Volume", VNID_SPK, HDA_OUTPUT), |
| CA0132_CODEC_MUTE("Master Playback Switch", VNID_SPK, HDA_OUTPUT), |
| CA0132_CODEC_VOL("Capture Volume", VNID_MIC, HDA_INPUT), |
| CA0132_CODEC_MUTE("Capture Switch", VNID_MIC, HDA_INPUT), |
| HDA_CODEC_VOLUME("Analog-Mic2 Capture Volume", 0x08, 0, HDA_INPUT), |
| HDA_CODEC_MUTE("Analog-Mic2 Capture Switch", 0x08, 0, HDA_INPUT), |
| HDA_CODEC_VOLUME("What U Hear Capture Volume", 0x0a, 0, HDA_INPUT), |
| HDA_CODEC_MUTE("What U Hear Capture Switch", 0x0a, 0, HDA_INPUT), |
| CA0132_CODEC_MUTE_MONO("Mic1-Boost (30dB) Capture Switch", |
| 0x12, 1, HDA_INPUT), |
| CA0132_CODEC_MUTE_MONO("HP/Speaker Playback Switch", |
| VNID_HP_SEL, 1, HDA_OUTPUT), |
| CA0132_CODEC_MUTE_MONO("AMic1/DMic Capture Switch", |
| VNID_AMIC1_SEL, 1, HDA_INPUT), |
| CA0132_CODEC_MUTE_MONO("HP/Speaker Auto Detect Playback Switch", |
| VNID_HP_ASEL, 1, HDA_OUTPUT), |
| CA0132_CODEC_MUTE_MONO("AMic1/DMic Auto Detect Capture Switch", |
| VNID_AMIC1_ASEL, 1, HDA_INPUT), |
| { } /* end */ |
| }; |
| |
| /* |
| * Desktop specific control mixer. Removes auto-detect for mic, and adds |
| * surround controls. Also sets both the Front Playback and Capture Volume |
| * controls to alt so they set the DSP's decibel level. |
| */ |
| static const struct snd_kcontrol_new desktop_mixer[] = { |
| CA0132_ALT_CODEC_VOL("Front Playback Volume", 0x02, HDA_OUTPUT), |
| CA0132_CODEC_MUTE("Front Playback Switch", VNID_SPK, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("Surround Playback Volume", 0x04, 0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Surround Playback Switch", 0x04, 0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x03, 1, 0, HDA_OUTPUT), |
| HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x03, 1, 0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x03, 2, 0, HDA_OUTPUT), |
| HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x03, 2, 0, HDA_OUTPUT), |
| CA0132_ALT_CODEC_VOL("Capture Volume", 0x07, HDA_INPUT), |
| CA0132_CODEC_MUTE("Capture Switch", VNID_MIC, HDA_INPUT), |
| HDA_CODEC_VOLUME("What U Hear Capture Volume", 0x0a, 0, HDA_INPUT), |
| HDA_CODEC_MUTE("What U Hear Capture Switch", 0x0a, 0, HDA_INPUT), |
| CA0132_CODEC_MUTE_MONO("HP/Speaker Auto Detect Playback Switch", |
| VNID_HP_ASEL, 1, HDA_OUTPUT), |
| { } /* end */ |
| }; |
| |
| /* |
| * Same as the Sound Blaster Z, except doesn't use the alt volume for capture |
| * because it doesn't set decibel levels for the DSP for capture. |
| */ |
| static const struct snd_kcontrol_new r3di_mixer[] = { |
| CA0132_ALT_CODEC_VOL("Front Playback Volume", 0x02, HDA_OUTPUT), |
| CA0132_CODEC_MUTE("Front Playback Switch", VNID_SPK, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("Surround Playback Volume", 0x04, 0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Surround Playback Switch", 0x04, 0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x03, 1, 0, HDA_OUTPUT), |
| HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x03, 1, 0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x03, 2, 0, HDA_OUTPUT), |
| HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x03, 2, 0, HDA_OUTPUT), |
| CA0132_CODEC_VOL("Capture Volume", VNID_MIC, HDA_INPUT), |
| CA0132_CODEC_MUTE("Capture Switch", VNID_MIC, HDA_INPUT), |
| HDA_CODEC_VOLUME("What U Hear Capture Volume", 0x0a, 0, HDA_INPUT), |
| HDA_CODEC_MUTE("What U Hear Capture Switch", 0x0a, 0, HDA_INPUT), |
| CA0132_CODEC_MUTE_MONO("HP/Speaker Auto Detect Playback Switch", |
| VNID_HP_ASEL, 1, HDA_OUTPUT), |
| { } /* end */ |
| }; |
| |
| static int ca0132_build_controls(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int i, num_fx, num_sliders; |
| int err = 0; |
| |
| /* Add Mixer controls */ |
| for (i = 0; i < spec->num_mixers; i++) { |
| err = snd_hda_add_new_ctls(codec, spec->mixers[i]); |
| if (err < 0) |
| return err; |
| } |
| /* Setup vmaster with surround slaves for desktop ca0132 devices */ |
| if (ca0132_use_alt_functions(spec)) { |
| snd_hda_set_vmaster_tlv(codec, spec->dacs[0], HDA_OUTPUT, |
| spec->tlv); |
| snd_hda_add_vmaster(codec, "Master Playback Volume", |
| spec->tlv, ca0132_alt_slave_pfxs, |
| "Playback Volume"); |
| err = __snd_hda_add_vmaster(codec, "Master Playback Switch", |
| NULL, ca0132_alt_slave_pfxs, |
| "Playback Switch", |
| true, &spec->vmaster_mute.sw_kctl); |
| if (err < 0) |
| return err; |
| } |
| |
| /* Add in and out effects controls. |
| * VoiceFX, PE and CrystalVoice are added separately. |
| */ |
| num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT; |
| for (i = 0; i < num_fx; i++) { |
| /* Desktop cards break if Echo Cancellation is used. */ |
| if (ca0132_use_pci_mmio(spec)) { |
| if (i == (ECHO_CANCELLATION - IN_EFFECT_START_NID + |
| OUT_EFFECTS_COUNT)) |
| continue; |
| } |
| |
| err = add_fx_switch(codec, ca0132_effects[i].nid, |
| ca0132_effects[i].name, |
| ca0132_effects[i].direct); |
| if (err < 0) |
| return err; |
| } |
| /* |
| * If codec has use_alt_controls set to true, add effect level sliders, |
| * EQ presets, and Smart Volume presets. Also, change names to add FX |
| * prefix, and change PlayEnhancement and CrystalVoice to match. |
| */ |
| if (ca0132_use_alt_controls(spec)) { |
| err = ca0132_alt_add_svm_enum(codec); |
| if (err < 0) |
| return err; |
| |
| err = add_ca0132_alt_eq_presets(codec); |
| if (err < 0) |
| return err; |
| |
| err = add_fx_switch(codec, PLAY_ENHANCEMENT, |
| "Enable OutFX", 0); |
| if (err < 0) |
| return err; |
| |
| err = add_fx_switch(codec, CRYSTAL_VOICE, |
| "Enable InFX", 1); |
| if (err < 0) |
| return err; |
| |
| num_sliders = OUT_EFFECTS_COUNT - 1; |
| for (i = 0; i < num_sliders; i++) { |
| err = ca0132_alt_add_effect_slider(codec, |
| ca0132_effects[i].nid, |
| ca0132_effects[i].name, |
| ca0132_effects[i].direct); |
| if (err < 0) |
| return err; |
| } |
| |
| err = ca0132_alt_add_effect_slider(codec, XBASS_XOVER, |
| "X-Bass Crossover", EFX_DIR_OUT); |
| |
| if (err < 0) |
| return err; |
| } else { |
| err = add_fx_switch(codec, PLAY_ENHANCEMENT, |
| "PlayEnhancement", 0); |
| if (err < 0) |
| return err; |
| |
| err = add_fx_switch(codec, CRYSTAL_VOICE, |
| "CrystalVoice", 1); |
| if (err < 0) |
| return err; |
| } |
| err = add_voicefx(codec); |
| if (err < 0) |
| return err; |
| |
| /* |
| * If the codec uses alt_functions, you need the enumerated controls |
| * to select the new outputs and inputs, plus add the new mic boost |
| * setting control. |
| */ |
| if (ca0132_use_alt_functions(spec)) { |
| err = ca0132_alt_add_output_enum(codec); |
| if (err < 0) |
| return err; |
| err = ca0132_alt_add_mic_boost_enum(codec); |
| if (err < 0) |
| return err; |
| /* |
| * ZxR only has microphone input, there is no front panel |
| * header on the card, and aux-in is handled by the DBPro board. |
| */ |
| if (ca0132_quirk(spec) != QUIRK_ZXR) { |
| err = ca0132_alt_add_input_enum(codec); |
| if (err < 0) |
| return err; |
| } |
| } |
| |
| if (ca0132_quirk(spec) == QUIRK_AE5) { |
| err = ae5_add_headphone_gain_enum(codec); |
| if (err < 0) |
| return err; |
| err = ae5_add_sound_filter_enum(codec); |
| if (err < 0) |
| return err; |
| } |
| |
| if (ca0132_quirk(spec) == QUIRK_ZXR) { |
| err = zxr_add_headphone_gain_switch(codec); |
| if (err < 0) |
| return err; |
| } |
| #ifdef ENABLE_TUNING_CONTROLS |
| add_tuning_ctls(codec); |
| #endif |
| |
| err = snd_hda_jack_add_kctls(codec, &spec->autocfg); |
| if (err < 0) |
| return err; |
| |
| if (spec->dig_out) { |
| err = snd_hda_create_spdif_out_ctls(codec, spec->dig_out, |
| spec->dig_out); |
| if (err < 0) |
| return err; |
| err = snd_hda_create_spdif_share_sw(codec, &spec->multiout); |
| if (err < 0) |
| return err; |
| /* spec->multiout.share_spdif = 1; */ |
| } |
| |
| if (spec->dig_in) { |
| err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in); |
| if (err < 0) |
| return err; |
| } |
| |
| if (ca0132_use_alt_functions(spec)) |
| ca0132_alt_add_chmap_ctls(codec); |
| |
| return 0; |
| } |
| |
| static int dbpro_build_controls(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int err = 0; |
| |
| if (spec->dig_out) { |
| err = snd_hda_create_spdif_out_ctls(codec, spec->dig_out, |
| spec->dig_out); |
| if (err < 0) |
| return err; |
| } |
| |
| if (spec->dig_in) { |
| err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in); |
| if (err < 0) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * PCM |
| */ |
| static const struct hda_pcm_stream ca0132_pcm_analog_playback = { |
| .substreams = 1, |
| .channels_min = 2, |
| .channels_max = 6, |
| .ops = { |
| .prepare = ca0132_playback_pcm_prepare, |
| .cleanup = ca0132_playback_pcm_cleanup, |
| .get_delay = ca0132_playback_pcm_delay, |
| }, |
| }; |
| |
| static const struct hda_pcm_stream ca0132_pcm_analog_capture = { |
| .substreams = 1, |
| .channels_min = 2, |
| .channels_max = 2, |
| .ops = { |
| .prepare = ca0132_capture_pcm_prepare, |
| .cleanup = ca0132_capture_pcm_cleanup, |
| .get_delay = ca0132_capture_pcm_delay, |
| }, |
| }; |
| |
| static const struct hda_pcm_stream ca0132_pcm_digital_playback = { |
| .substreams = 1, |
| .channels_min = 2, |
| .channels_max = 2, |
| .ops = { |
| .open = ca0132_dig_playback_pcm_open, |
| .close = ca0132_dig_playback_pcm_close, |
| .prepare = ca0132_dig_playback_pcm_prepare, |
| .cleanup = ca0132_dig_playback_pcm_cleanup |
| }, |
| }; |
| |
| static const struct hda_pcm_stream ca0132_pcm_digital_capture = { |
| .substreams = 1, |
| .channels_min = 2, |
| .channels_max = 2, |
| }; |
| |
| static int ca0132_build_pcms(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| struct hda_pcm *info; |
| |
| info = snd_hda_codec_pcm_new(codec, "CA0132 Analog"); |
| if (!info) |
| return -ENOMEM; |
| if (ca0132_use_alt_functions(spec)) { |
| info->own_chmap = true; |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK].chmap |
| = ca0132_alt_chmaps; |
| } |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK] = ca0132_pcm_analog_playback; |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dacs[0]; |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = |
| spec->multiout.max_channels; |
| info->stream[SNDRV_PCM_STREAM_CAPTURE] = ca0132_pcm_analog_capture; |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1; |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0]; |
| |
| /* With the DSP enabled, desktops don't use this ADC. */ |
| if (!ca0132_use_alt_functions(spec)) { |
| info = snd_hda_codec_pcm_new(codec, "CA0132 Analog Mic-In2"); |
| if (!info) |
| return -ENOMEM; |
| info->stream[SNDRV_PCM_STREAM_CAPTURE] = |
| ca0132_pcm_analog_capture; |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1; |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[1]; |
| } |
| |
| info = snd_hda_codec_pcm_new(codec, "CA0132 What U Hear"); |
| if (!info) |
| return -ENOMEM; |
| info->stream[SNDRV_PCM_STREAM_CAPTURE] = ca0132_pcm_analog_capture; |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1; |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[2]; |
| |
| if (!spec->dig_out && !spec->dig_in) |
| return 0; |
| |
| info = snd_hda_codec_pcm_new(codec, "CA0132 Digital"); |
| if (!info) |
| return -ENOMEM; |
| info->pcm_type = HDA_PCM_TYPE_SPDIF; |
| if (spec->dig_out) { |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK] = |
| ca0132_pcm_digital_playback; |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dig_out; |
| } |
| if (spec->dig_in) { |
| info->stream[SNDRV_PCM_STREAM_CAPTURE] = |
| ca0132_pcm_digital_capture; |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in; |
| } |
| |
| return 0; |
| } |
| |
| static int dbpro_build_pcms(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| struct hda_pcm *info; |
| |
| info = snd_hda_codec_pcm_new(codec, "CA0132 Alt Analog"); |
| if (!info) |
| return -ENOMEM; |
| info->stream[SNDRV_PCM_STREAM_CAPTURE] = ca0132_pcm_analog_capture; |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1; |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0]; |
| |
| |
| if (!spec->dig_out && !spec->dig_in) |
| return 0; |
| |
| info = snd_hda_codec_pcm_new(codec, "CA0132 Digital"); |
| if (!info) |
| return -ENOMEM; |
| info->pcm_type = HDA_PCM_TYPE_SPDIF; |
| if (spec->dig_out) { |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK] = |
| ca0132_pcm_digital_playback; |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dig_out; |
| } |
| if (spec->dig_in) { |
| info->stream[SNDRV_PCM_STREAM_CAPTURE] = |
| ca0132_pcm_digital_capture; |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in; |
| } |
| |
| return 0; |
| } |
| |
| static void init_output(struct hda_codec *codec, hda_nid_t pin, hda_nid_t dac) |
| { |
| if (pin) { |
| snd_hda_set_pin_ctl(codec, pin, PIN_HP); |
| if (get_wcaps(codec, pin) & AC_WCAP_OUT_AMP) |
| snd_hda_codec_write(codec, pin, 0, |
| AC_VERB_SET_AMP_GAIN_MUTE, |
| AMP_OUT_UNMUTE); |
| } |
| if (dac && (get_wcaps(codec, dac) & AC_WCAP_OUT_AMP)) |
| snd_hda_codec_write(codec, dac, 0, |
| AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO); |
| } |
| |
| static void init_input(struct hda_codec *codec, hda_nid_t pin, hda_nid_t adc) |
| { |
| if (pin) { |
| snd_hda_set_pin_ctl(codec, pin, PIN_VREF80); |
| if (get_wcaps(codec, pin) & AC_WCAP_IN_AMP) |
| snd_hda_codec_write(codec, pin, 0, |
| AC_VERB_SET_AMP_GAIN_MUTE, |
| AMP_IN_UNMUTE(0)); |
| } |
| if (adc && (get_wcaps(codec, adc) & AC_WCAP_IN_AMP)) { |
| snd_hda_codec_write(codec, adc, 0, AC_VERB_SET_AMP_GAIN_MUTE, |
| AMP_IN_UNMUTE(0)); |
| |
| /* init to 0 dB and unmute. */ |
| snd_hda_codec_amp_stereo(codec, adc, HDA_INPUT, 0, |
| HDA_AMP_VOLMASK, 0x5a); |
| snd_hda_codec_amp_stereo(codec, adc, HDA_INPUT, 0, |
| HDA_AMP_MUTE, 0); |
| } |
| } |
| |
| static void refresh_amp_caps(struct hda_codec *codec, hda_nid_t nid, int dir) |
| { |
| unsigned int caps; |
| |
| caps = snd_hda_param_read(codec, nid, dir == HDA_OUTPUT ? |
| AC_PAR_AMP_OUT_CAP : AC_PAR_AMP_IN_CAP); |
| snd_hda_override_amp_caps(codec, nid, dir, caps); |
| } |
| |
| /* |
| * Switch between Digital built-in mic and analog mic. |
| */ |
| static void ca0132_set_dmic(struct hda_codec *codec, int enable) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int tmp; |
| u8 val; |
| unsigned int oldval; |
| |
| codec_dbg(codec, "ca0132_set_dmic: enable=%d\n", enable); |
| |
| oldval = stop_mic1(codec); |
| ca0132_set_vipsource(codec, 0); |
| if (enable) { |
| /* set DMic input as 2-ch */ |
| tmp = FLOAT_TWO; |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); |
| |
| val = spec->dmic_ctl; |
| val |= 0x80; |
| snd_hda_codec_write(codec, spec->input_pins[0], 0, |
| VENDOR_CHIPIO_DMIC_CTL_SET, val); |
| |
| if (!(spec->dmic_ctl & 0x20)) |
| chipio_set_control_flag(codec, CONTROL_FLAG_DMIC, 1); |
| } else { |
| /* set AMic input as mono */ |
| tmp = FLOAT_ONE; |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); |
| |
| val = spec->dmic_ctl; |
| /* clear bit7 and bit5 to disable dmic */ |
| val &= 0x5f; |
| snd_hda_codec_write(codec, spec->input_pins[0], 0, |
| VENDOR_CHIPIO_DMIC_CTL_SET, val); |
| |
| if (!(spec->dmic_ctl & 0x20)) |
| chipio_set_control_flag(codec, CONTROL_FLAG_DMIC, 0); |
| } |
| ca0132_set_vipsource(codec, 1); |
| resume_mic1(codec, oldval); |
| } |
| |
| /* |
| * Initialization for Digital Mic. |
| */ |
| static void ca0132_init_dmic(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| u8 val; |
| |
| /* Setup Digital Mic here, but don't enable. |
| * Enable based on jack detect. |
| */ |
| |
| /* MCLK uses MPIO1, set to enable. |
| * Bit 2-0: MPIO select |
| * Bit 3: set to disable |
| * Bit 7-4: reserved |
| */ |
| val = 0x01; |
| snd_hda_codec_write(codec, spec->input_pins[0], 0, |
| VENDOR_CHIPIO_DMIC_MCLK_SET, val); |
| |
| /* Data1 uses MPIO3. Data2 not use |
| * Bit 2-0: Data1 MPIO select |
| * Bit 3: set disable Data1 |
| * Bit 6-4: Data2 MPIO select |
| * Bit 7: set disable Data2 |
| */ |
| val = 0x83; |
| snd_hda_codec_write(codec, spec->input_pins[0], 0, |
| VENDOR_CHIPIO_DMIC_PIN_SET, val); |
| |
| /* Use Ch-0 and Ch-1. Rate is 48K, mode 1. Disable DMic first. |
| * Bit 3-0: Channel mask |
| * Bit 4: set for 48KHz, clear for 32KHz |
| * Bit 5: mode |
| * Bit 6: set to select Data2, clear for Data1 |
| * Bit 7: set to enable DMic, clear for AMic |
| */ |
| if (ca0132_quirk(spec) == QUIRK_ALIENWARE_M17XR4) |
| val = 0x33; |
| else |
| val = 0x23; |
| /* keep a copy of dmic ctl val for enable/disable dmic purpuse */ |
| spec->dmic_ctl = val; |
| snd_hda_codec_write(codec, spec->input_pins[0], 0, |
| VENDOR_CHIPIO_DMIC_CTL_SET, val); |
| } |
| |
| /* |
| * Initialization for Analog Mic 2 |
| */ |
| static void ca0132_init_analog_mic2(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| mutex_lock(&spec->chipio_mutex); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x20); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0x19); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_DATA_WRITE, 0x00); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x2D); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0x19); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_DATA_WRITE, 0x00); |
| mutex_unlock(&spec->chipio_mutex); |
| } |
| |
| static void ca0132_refresh_widget_caps(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int i; |
| |
| codec_dbg(codec, "ca0132_refresh_widget_caps.\n"); |
| snd_hda_codec_update_widgets(codec); |
| |
| for (i = 0; i < spec->multiout.num_dacs; i++) |
| refresh_amp_caps(codec, spec->dacs[i], HDA_OUTPUT); |
| |
| for (i = 0; i < spec->num_outputs; i++) |
| refresh_amp_caps(codec, spec->out_pins[i], HDA_OUTPUT); |
| |
| for (i = 0; i < spec->num_inputs; i++) { |
| refresh_amp_caps(codec, spec->adcs[i], HDA_INPUT); |
| refresh_amp_caps(codec, spec->input_pins[i], HDA_INPUT); |
| } |
| } |
| |
| /* |
| * Creates a dummy stream to bind the output to. This seems to have to be done |
| * after changing the main outputs source and destination streams. |
| */ |
| static void ca0132_alt_create_dummy_stream(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int stream_format; |
| |
| stream_format = snd_hdac_calc_stream_format(48000, 2, |
| SNDRV_PCM_FORMAT_S32_LE, 32, 0); |
| |
| snd_hda_codec_setup_stream(codec, spec->dacs[0], spec->dsp_stream_id, |
| 0, stream_format); |
| |
| snd_hda_codec_cleanup_stream(codec, spec->dacs[0]); |
| } |
| |
| /* |
| * Initialize mic for non-chromebook ca0132 implementations. |
| */ |
| static void ca0132_alt_init_analog_mics(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int tmp; |
| |
| /* Mic 1 Setup */ |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); |
| if (ca0132_quirk(spec) == QUIRK_R3DI) { |
| chipio_set_conn_rate(codec, 0x0F, SR_96_000); |
| tmp = FLOAT_ONE; |
| } else |
| tmp = FLOAT_THREE; |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); |
| |
| /* Mic 2 setup (not present on desktop cards) */ |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN2, SR_96_000); |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2, SR_96_000); |
| if (ca0132_quirk(spec) == QUIRK_R3DI) |
| chipio_set_conn_rate(codec, 0x0F, SR_96_000); |
| tmp = FLOAT_ZERO; |
| dspio_set_uint_param(codec, 0x80, 0x01, tmp); |
| } |
| |
| /* |
| * Sets the source of stream 0x14 to connpointID 0x48, and the destination |
| * connpointID to 0x91. If this isn't done, the destination is 0x71, and |
| * you get no sound. I'm guessing this has to do with the Sound Blaster Z |
| * having an updated DAC, which changes the destination to that DAC. |
| */ |
| static void sbz_connect_streams(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| mutex_lock(&spec->chipio_mutex); |
| |
| codec_dbg(codec, "Connect Streams entered, mutex locked and loaded.\n"); |
| |
| chipio_set_stream_channels(codec, 0x0C, 6); |
| chipio_set_stream_control(codec, 0x0C, 1); |
| |
| /* This value is 0x43 for 96khz, and 0x83 for 192khz. */ |
| chipio_write_no_mutex(codec, 0x18a020, 0x00000043); |
| |
| /* Setup stream 0x14 with it's source and destination points */ |
| chipio_set_stream_source_dest(codec, 0x14, 0x48, 0x91); |
| chipio_set_conn_rate_no_mutex(codec, 0x48, SR_96_000); |
| chipio_set_conn_rate_no_mutex(codec, 0x91, SR_96_000); |
| chipio_set_stream_channels(codec, 0x14, 2); |
| chipio_set_stream_control(codec, 0x14, 1); |
| |
| codec_dbg(codec, "Connect Streams exited, mutex released.\n"); |
| |
| mutex_unlock(&spec->chipio_mutex); |
| } |
| |
| /* |
| * Write data through ChipIO to setup proper stream destinations. |
| * Not sure how it exactly works, but it seems to direct data |
| * to different destinations. Example is f8 to c0, e0 to c0. |
| * All I know is, if you don't set these, you get no sound. |
| */ |
| static void sbz_chipio_startup_data(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| mutex_lock(&spec->chipio_mutex); |
| codec_dbg(codec, "Startup Data entered, mutex locked and loaded.\n"); |
| |
| /* These control audio output */ |
| chipio_write_no_mutex(codec, 0x190060, 0x0001f8c0); |
| chipio_write_no_mutex(codec, 0x190064, 0x0001f9c1); |
| chipio_write_no_mutex(codec, 0x190068, 0x0001fac6); |
| chipio_write_no_mutex(codec, 0x19006c, 0x0001fbc7); |
| /* Signal to update I think */ |
| chipio_write_no_mutex(codec, 0x19042c, 0x00000001); |
| |
| chipio_set_stream_channels(codec, 0x0C, 6); |
| chipio_set_stream_control(codec, 0x0C, 1); |
| /* No clue what these control */ |
| if (ca0132_quirk(spec) == QUIRK_SBZ) { |
| chipio_write_no_mutex(codec, 0x190030, 0x0001e0c0); |
| chipio_write_no_mutex(codec, 0x190034, 0x0001e1c1); |
| chipio_write_no_mutex(codec, 0x190038, 0x0001e4c2); |
| chipio_write_no_mutex(codec, 0x19003c, 0x0001e5c3); |
| chipio_write_no_mutex(codec, 0x190040, 0x0001e2c4); |
| chipio_write_no_mutex(codec, 0x190044, 0x0001e3c5); |
| chipio_write_no_mutex(codec, 0x190048, 0x0001e8c6); |
| chipio_write_no_mutex(codec, 0x19004c, 0x0001e9c7); |
| chipio_write_no_mutex(codec, 0x190050, 0x0001ecc8); |
| chipio_write_no_mutex(codec, 0x190054, 0x0001edc9); |
| chipio_write_no_mutex(codec, 0x190058, 0x0001eaca); |
| chipio_write_no_mutex(codec, 0x19005c, 0x0001ebcb); |
| } else if (ca0132_quirk(spec) == QUIRK_ZXR) { |
| chipio_write_no_mutex(codec, 0x190038, 0x000140c2); |
| chipio_write_no_mutex(codec, 0x19003c, 0x000141c3); |
| chipio_write_no_mutex(codec, 0x190040, 0x000150c4); |
| chipio_write_no_mutex(codec, 0x190044, 0x000151c5); |
| chipio_write_no_mutex(codec, 0x190050, 0x000142c8); |
| chipio_write_no_mutex(codec, 0x190054, 0x000143c9); |
| chipio_write_no_mutex(codec, 0x190058, 0x000152ca); |
| chipio_write_no_mutex(codec, 0x19005c, 0x000153cb); |
| } |
| chipio_write_no_mutex(codec, 0x19042c, 0x00000001); |
| |
| codec_dbg(codec, "Startup Data exited, mutex released.\n"); |
| mutex_unlock(&spec->chipio_mutex); |
| } |
| |
| /* |
| * Custom DSP SCP commands where the src value is 0x00 instead of 0x20. This is |
| * done after the DSP is loaded. |
| */ |
| static void ca0132_alt_dsp_scp_startup(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int tmp, i; |
| |
| /* |
| * Gotta run these twice, or else mic works inconsistently. Not clear |
| * why this is, but multiple tests have confirmed it. |
| */ |
| for (i = 0; i < 2; i++) { |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| case QUIRK_AE5: |
| tmp = 0x00000003; |
| dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); |
| tmp = 0x00000000; |
| dspio_set_uint_param_no_source(codec, 0x80, 0x0A, tmp); |
| tmp = 0x00000001; |
| dspio_set_uint_param_no_source(codec, 0x80, 0x0B, tmp); |
| tmp = 0x00000004; |
| dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); |
| tmp = 0x00000005; |
| dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); |
| tmp = 0x00000000; |
| dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); |
| break; |
| case QUIRK_R3D: |
| case QUIRK_R3DI: |
| tmp = 0x00000000; |
| dspio_set_uint_param_no_source(codec, 0x80, 0x0A, tmp); |
| tmp = 0x00000001; |
| dspio_set_uint_param_no_source(codec, 0x80, 0x0B, tmp); |
| tmp = 0x00000004; |
| dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); |
| tmp = 0x00000005; |
| dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); |
| tmp = 0x00000000; |
| dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); |
| break; |
| default: |
| break; |
| } |
| msleep(100); |
| } |
| } |
| |
| static void ca0132_alt_dsp_initial_mic_setup(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int tmp; |
| |
| chipio_set_stream_control(codec, 0x03, 0); |
| chipio_set_stream_control(codec, 0x04, 0); |
| |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); |
| |
| tmp = FLOAT_THREE; |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); |
| |
| chipio_set_stream_control(codec, 0x03, 1); |
| chipio_set_stream_control(codec, 0x04, 1); |
| |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| chipio_write(codec, 0x18b098, 0x0000000c); |
| chipio_write(codec, 0x18b09C, 0x0000000c); |
| break; |
| case QUIRK_AE5: |
| chipio_write(codec, 0x18b098, 0x0000000c); |
| chipio_write(codec, 0x18b09c, 0x0000004c); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void ae5_post_dsp_register_set(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| chipio_8051_write_direct(codec, 0x93, 0x10); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x44); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc2); |
| |
| writeb(0xff, spec->mem_base + 0x304); |
| writeb(0xff, spec->mem_base + 0x304); |
| writeb(0xff, spec->mem_base + 0x304); |
| writeb(0xff, spec->mem_base + 0x304); |
| writeb(0x00, spec->mem_base + 0x100); |
| writeb(0xff, spec->mem_base + 0x304); |
| writeb(0x00, spec->mem_base + 0x100); |
| writeb(0xff, spec->mem_base + 0x304); |
| writeb(0x00, spec->mem_base + 0x100); |
| writeb(0xff, spec->mem_base + 0x304); |
| writeb(0x00, spec->mem_base + 0x100); |
| writeb(0xff, spec->mem_base + 0x304); |
| |
| ca0113_mmio_command_set(codec, 0x30, 0x2b, 0x3f); |
| ca0113_mmio_command_set(codec, 0x30, 0x2d, 0x3f); |
| ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83); |
| } |
| |
| static void ae5_post_dsp_param_setup(struct hda_codec *codec) |
| { |
| /* |
| * Param3 in the 8051's memory is represented by the ascii string 'mch' |
| * which seems to be 'multichannel'. This is also mentioned in the |
| * AE-5's registry values in Windows. |
| */ |
| chipio_set_control_param(codec, 3, 0); |
| /* |
| * I believe ASI is 'audio serial interface' and that it's used to |
| * change colors on the external LED strip connected to the AE-5. |
| */ |
| chipio_set_control_flag(codec, CONTROL_FLAG_ASI_96KHZ, 1); |
| |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x724, 0x83); |
| chipio_set_control_param(codec, CONTROL_PARAM_ASI, 0); |
| |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x92); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0xfa); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_DATA_WRITE, 0x22); |
| } |
| |
| static void ae5_post_dsp_pll_setup(struct hda_codec *codec) |
| { |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x41); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc8); |
| |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x45); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PLL_PMU_WRITE, 0xcc); |
| |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x40); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PLL_PMU_WRITE, 0xcb); |
| |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x43); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc7); |
| |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x51); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PLL_PMU_WRITE, 0x8d); |
| } |
| |
| static void ae5_post_dsp_stream_setup(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| mutex_lock(&spec->chipio_mutex); |
| |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x725, 0x81); |
| |
| chipio_set_conn_rate_no_mutex(codec, 0x70, SR_96_000); |
| |
| chipio_set_stream_channels(codec, 0x0C, 6); |
| chipio_set_stream_control(codec, 0x0C, 1); |
| |
| chipio_set_stream_source_dest(codec, 0x5, 0x43, 0x0); |
| |
| chipio_set_stream_source_dest(codec, 0x18, 0x9, 0xd0); |
| chipio_set_conn_rate_no_mutex(codec, 0xd0, SR_96_000); |
| chipio_set_stream_channels(codec, 0x18, 6); |
| chipio_set_stream_control(codec, 0x18, 1); |
| |
| chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_ASI, 4); |
| |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x43); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc7); |
| |
| ca0113_mmio_command_set(codec, 0x48, 0x01, 0x80); |
| |
| mutex_unlock(&spec->chipio_mutex); |
| } |
| |
| static void ae5_post_dsp_startup_data(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| mutex_lock(&spec->chipio_mutex); |
| |
| chipio_write_no_mutex(codec, 0x189000, 0x0001f101); |
| chipio_write_no_mutex(codec, 0x189004, 0x0001f101); |
| chipio_write_no_mutex(codec, 0x189024, 0x00014004); |
| chipio_write_no_mutex(codec, 0x189028, 0x0002000f); |
| |
| ca0113_mmio_command_set(codec, 0x48, 0x0a, 0x05); |
| chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_ASI, 7); |
| ca0113_mmio_command_set(codec, 0x48, 0x0b, 0x12); |
| ca0113_mmio_command_set(codec, 0x48, 0x04, 0x00); |
| ca0113_mmio_command_set(codec, 0x48, 0x06, 0x48); |
| ca0113_mmio_command_set(codec, 0x48, 0x0a, 0x05); |
| ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83); |
| ca0113_mmio_command_set(codec, 0x48, 0x0f, 0x00); |
| ca0113_mmio_command_set(codec, 0x48, 0x10, 0x00); |
| ca0113_mmio_gpio_set(codec, 0, true); |
| ca0113_mmio_gpio_set(codec, 1, true); |
| ca0113_mmio_command_set(codec, 0x48, 0x07, 0x80); |
| |
| chipio_write_no_mutex(codec, 0x18b03c, 0x00000012); |
| |
| ca0113_mmio_command_set(codec, 0x48, 0x0f, 0x00); |
| ca0113_mmio_command_set(codec, 0x48, 0x10, 0x00); |
| |
| mutex_unlock(&spec->chipio_mutex); |
| } |
| |
| /* |
| * Setup default parameters for DSP |
| */ |
| static void ca0132_setup_defaults(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int tmp; |
| int num_fx; |
| int idx, i; |
| |
| if (spec->dsp_state != DSP_DOWNLOADED) |
| return; |
| |
| /* out, in effects + voicefx */ |
| num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1; |
| for (idx = 0; idx < num_fx; idx++) { |
| for (i = 0; i <= ca0132_effects[idx].params; i++) { |
| dspio_set_uint_param(codec, ca0132_effects[idx].mid, |
| ca0132_effects[idx].reqs[i], |
| ca0132_effects[idx].def_vals[i]); |
| } |
| } |
| |
| /*remove DSP headroom*/ |
| tmp = FLOAT_ZERO; |
| dspio_set_uint_param(codec, 0x96, 0x3C, tmp); |
| |
| /*set speaker EQ bypass attenuation*/ |
| dspio_set_uint_param(codec, 0x8f, 0x01, tmp); |
| |
| /* set AMic1 and AMic2 as mono mic */ |
| tmp = FLOAT_ONE; |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); |
| dspio_set_uint_param(codec, 0x80, 0x01, tmp); |
| |
| /* set AMic1 as CrystalVoice input */ |
| tmp = FLOAT_ONE; |
| dspio_set_uint_param(codec, 0x80, 0x05, tmp); |
| |
| /* set WUH source */ |
| tmp = FLOAT_TWO; |
| dspio_set_uint_param(codec, 0x31, 0x00, tmp); |
| } |
| |
| /* |
| * Setup default parameters for Recon3D/Recon3Di DSP. |
| */ |
| |
| static void r3d_setup_defaults(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int tmp; |
| int num_fx; |
| int idx, i; |
| |
| if (spec->dsp_state != DSP_DOWNLOADED) |
| return; |
| |
| ca0132_alt_dsp_scp_startup(codec); |
| ca0132_alt_init_analog_mics(codec); |
| |
| /*remove DSP headroom*/ |
| tmp = FLOAT_ZERO; |
| dspio_set_uint_param(codec, 0x96, 0x3C, tmp); |
| |
| /* set WUH source */ |
| tmp = FLOAT_TWO; |
| dspio_set_uint_param(codec, 0x31, 0x00, tmp); |
| chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); |
| |
| /* Set speaker source? */ |
| dspio_set_uint_param(codec, 0x32, 0x00, tmp); |
| |
| if (ca0132_quirk(spec) == QUIRK_R3DI) |
| r3di_gpio_dsp_status_set(codec, R3DI_DSP_DOWNLOADED); |
| |
| /* Setup effect defaults */ |
| num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1; |
| for (idx = 0; idx < num_fx; idx++) { |
| for (i = 0; i <= ca0132_effects[idx].params; i++) { |
| dspio_set_uint_param(codec, |
| ca0132_effects[idx].mid, |
| ca0132_effects[idx].reqs[i], |
| ca0132_effects[idx].def_vals[i]); |
| } |
| } |
| } |
| |
| /* |
| * Setup default parameters for the Sound Blaster Z DSP. A lot more going on |
| * than the Chromebook setup. |
| */ |
| static void sbz_setup_defaults(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int tmp; |
| int num_fx; |
| int idx, i; |
| |
| if (spec->dsp_state != DSP_DOWNLOADED) |
| return; |
| |
| ca0132_alt_dsp_scp_startup(codec); |
| ca0132_alt_init_analog_mics(codec); |
| sbz_connect_streams(codec); |
| sbz_chipio_startup_data(codec); |
| |
| chipio_set_stream_control(codec, 0x03, 1); |
| chipio_set_stream_control(codec, 0x04, 1); |
| |
| /* |
| * Sets internal input loopback to off, used to have a switch to |
| * enable input loopback, but turned out to be way too buggy. |
| */ |
| tmp = FLOAT_ONE; |
| dspio_set_uint_param(codec, 0x37, 0x08, tmp); |
| dspio_set_uint_param(codec, 0x37, 0x10, tmp); |
| |
| /*remove DSP headroom*/ |
| tmp = FLOAT_ZERO; |
| dspio_set_uint_param(codec, 0x96, 0x3C, tmp); |
| |
| /* set WUH source */ |
| tmp = FLOAT_TWO; |
| dspio_set_uint_param(codec, 0x31, 0x00, tmp); |
| chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); |
| |
| /* Set speaker source? */ |
| dspio_set_uint_param(codec, 0x32, 0x00, tmp); |
| |
| ca0132_alt_dsp_initial_mic_setup(codec); |
| |
| /* out, in effects + voicefx */ |
| num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1; |
| for (idx = 0; idx < num_fx; idx++) { |
| for (i = 0; i <= ca0132_effects[idx].params; i++) { |
| dspio_set_uint_param(codec, |
| ca0132_effects[idx].mid, |
| ca0132_effects[idx].reqs[i], |
| ca0132_effects[idx].def_vals[i]); |
| } |
| } |
| |
| ca0132_alt_create_dummy_stream(codec); |
| } |
| |
| /* |
| * Setup default parameters for the Sound BlasterX AE-5 DSP. |
| */ |
| static void ae5_setup_defaults(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int tmp; |
| int num_fx; |
| int idx, i; |
| |
| if (spec->dsp_state != DSP_DOWNLOADED) |
| return; |
| |
| ca0132_alt_dsp_scp_startup(codec); |
| ca0132_alt_init_analog_mics(codec); |
| chipio_set_stream_control(codec, 0x03, 1); |
| chipio_set_stream_control(codec, 0x04, 1); |
| |
| /* New, unknown SCP req's */ |
| tmp = FLOAT_ZERO; |
| dspio_set_uint_param(codec, 0x96, 0x29, tmp); |
| dspio_set_uint_param(codec, 0x96, 0x2a, tmp); |
| dspio_set_uint_param(codec, 0x80, 0x0d, tmp); |
| dspio_set_uint_param(codec, 0x80, 0x0e, tmp); |
| |
| ca0113_mmio_command_set(codec, 0x30, 0x2e, 0x3f); |
| ca0113_mmio_gpio_set(codec, 0, false); |
| ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00); |
| |
| /* Internal loopback off */ |
| tmp = FLOAT_ONE; |
| dspio_set_uint_param(codec, 0x37, 0x08, tmp); |
| dspio_set_uint_param(codec, 0x37, 0x10, tmp); |
| |
| /*remove DSP headroom*/ |
| tmp = FLOAT_ZERO; |
| dspio_set_uint_param(codec, 0x96, 0x3C, tmp); |
| |
| /* set WUH source */ |
| tmp = FLOAT_TWO; |
| dspio_set_uint_param(codec, 0x31, 0x00, tmp); |
| chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); |
| |
| /* Set speaker source? */ |
| dspio_set_uint_param(codec, 0x32, 0x00, tmp); |
| |
| ca0132_alt_dsp_initial_mic_setup(codec); |
| ae5_post_dsp_register_set(codec); |
| ae5_post_dsp_param_setup(codec); |
| ae5_post_dsp_pll_setup(codec); |
| ae5_post_dsp_stream_setup(codec); |
| ae5_post_dsp_startup_data(codec); |
| |
| /* out, in effects + voicefx */ |
| num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1; |
| for (idx = 0; idx < num_fx; idx++) { |
| for (i = 0; i <= ca0132_effects[idx].params; i++) { |
| dspio_set_uint_param(codec, |
| ca0132_effects[idx].mid, |
| ca0132_effects[idx].reqs[i], |
| ca0132_effects[idx].def_vals[i]); |
| } |
| } |
| |
| ca0132_alt_create_dummy_stream(codec); |
| } |
| |
| /* |
| * Initialization of flags in chip |
| */ |
| static void ca0132_init_flags(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| if (ca0132_use_alt_functions(spec)) { |
| chipio_set_control_flag(codec, CONTROL_FLAG_DSP_96KHZ, 1); |
| chipio_set_control_flag(codec, CONTROL_FLAG_DAC_96KHZ, 1); |
| chipio_set_control_flag(codec, CONTROL_FLAG_ADC_B_96KHZ, 1); |
| chipio_set_control_flag(codec, CONTROL_FLAG_ADC_C_96KHZ, 1); |
| chipio_set_control_flag(codec, CONTROL_FLAG_SRC_RATE_96KHZ, 1); |
| chipio_set_control_flag(codec, CONTROL_FLAG_IDLE_ENABLE, 0); |
| chipio_set_control_flag(codec, CONTROL_FLAG_SPDIF2OUT, 0); |
| chipio_set_control_flag(codec, |
| CONTROL_FLAG_PORT_D_10KOHM_LOAD, 0); |
| chipio_set_control_flag(codec, |
| CONTROL_FLAG_PORT_A_10KOHM_LOAD, 1); |
| } else { |
| chipio_set_control_flag(codec, CONTROL_FLAG_IDLE_ENABLE, 0); |
| chipio_set_control_flag(codec, |
| CONTROL_FLAG_PORT_A_COMMON_MODE, 0); |
| chipio_set_control_flag(codec, |
| CONTROL_FLAG_PORT_D_COMMON_MODE, 0); |
| chipio_set_control_flag(codec, |
| CONTROL_FLAG_PORT_A_10KOHM_LOAD, 0); |
| chipio_set_control_flag(codec, |
| CONTROL_FLAG_PORT_D_10KOHM_LOAD, 0); |
| chipio_set_control_flag(codec, CONTROL_FLAG_ADC_C_HIGH_PASS, 1); |
| } |
| } |
| |
| /* |
| * Initialization of parameters in chip |
| */ |
| static void ca0132_init_params(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| if (ca0132_use_alt_functions(spec)) { |
| chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); |
| chipio_set_conn_rate(codec, 0x0B, SR_48_000); |
| chipio_set_control_param(codec, CONTROL_PARAM_SPDIF1_SOURCE, 0); |
| chipio_set_control_param(codec, 0, 0); |
| chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, 0); |
| } |
| |
| chipio_set_control_param(codec, CONTROL_PARAM_PORTA_160OHM_GAIN, 6); |
| chipio_set_control_param(codec, CONTROL_PARAM_PORTD_160OHM_GAIN, 6); |
| } |
| |
| static void ca0132_set_dsp_msr(struct hda_codec *codec, bool is96k) |
| { |
| chipio_set_control_flag(codec, CONTROL_FLAG_DSP_96KHZ, is96k); |
| chipio_set_control_flag(codec, CONTROL_FLAG_DAC_96KHZ, is96k); |
| chipio_set_control_flag(codec, CONTROL_FLAG_SRC_RATE_96KHZ, is96k); |
| chipio_set_control_flag(codec, CONTROL_FLAG_SRC_CLOCK_196MHZ, is96k); |
| chipio_set_control_flag(codec, CONTROL_FLAG_ADC_B_96KHZ, is96k); |
| chipio_set_control_flag(codec, CONTROL_FLAG_ADC_C_96KHZ, is96k); |
| |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); |
| chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); |
| } |
| |
| static bool ca0132_download_dsp_images(struct hda_codec *codec) |
| { |
| bool dsp_loaded = false; |
| struct ca0132_spec *spec = codec->spec; |
| const struct dsp_image_seg *dsp_os_image; |
| const struct firmware *fw_entry = NULL; |
| /* |
| * Alternate firmwares for different variants. The Recon3Di apparently |
| * can use the default firmware, but I'll leave the option in case |
| * it needs it again. |
| */ |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| case QUIRK_R3D: |
| case QUIRK_AE5: |
| if (request_firmware(&fw_entry, DESKTOP_EFX_FILE, |
| codec->card->dev) != 0) |
| codec_dbg(codec, "Desktop firmware not found."); |
| else |
| codec_dbg(codec, "Desktop firmware selected."); |
| break; |
| case QUIRK_R3DI: |
| if (request_firmware(&fw_entry, R3DI_EFX_FILE, |
| codec->card->dev) != 0) |
| codec_dbg(codec, "Recon3Di alt firmware not detected."); |
| else |
| codec_dbg(codec, "Recon3Di firmware selected."); |
| break; |
| default: |
| break; |
| } |
| /* |
| * Use default ctefx.bin if no alt firmware is detected, or if none |
| * exists for your particular codec. |
| */ |
| if (!fw_entry) { |
| codec_dbg(codec, "Default firmware selected."); |
| if (request_firmware(&fw_entry, EFX_FILE, |
| codec->card->dev) != 0) |
| return false; |
| } |
| |
| dsp_os_image = (struct dsp_image_seg *)(fw_entry->data); |
| if (dspload_image(codec, dsp_os_image, 0, 0, true, 0)) { |
| codec_err(codec, "ca0132 DSP load image failed\n"); |
| goto exit_download; |
| } |
| |
| dsp_loaded = dspload_wait_loaded(codec); |
| |
| exit_download: |
| release_firmware(fw_entry); |
| |
| return dsp_loaded; |
| } |
| |
| static void ca0132_download_dsp(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| #ifndef CONFIG_SND_HDA_CODEC_CA0132_DSP |
| return; /* NOP */ |
| #endif |
| |
| if (spec->dsp_state == DSP_DOWNLOAD_FAILED) |
| return; /* don't retry failures */ |
| |
| chipio_enable_clocks(codec); |
| if (spec->dsp_state != DSP_DOWNLOADED) { |
| spec->dsp_state = DSP_DOWNLOADING; |
| |
| if (!ca0132_download_dsp_images(codec)) |
| spec->dsp_state = DSP_DOWNLOAD_FAILED; |
| else |
| spec->dsp_state = DSP_DOWNLOADED; |
| } |
| |
| /* For codecs using alt functions, this is already done earlier */ |
| if (spec->dsp_state == DSP_DOWNLOADED && !ca0132_use_alt_functions(spec)) |
| ca0132_set_dsp_msr(codec, true); |
| } |
| |
| static void ca0132_process_dsp_response(struct hda_codec *codec, |
| struct hda_jack_callback *callback) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| codec_dbg(codec, "ca0132_process_dsp_response\n"); |
| if (spec->wait_scp) { |
| if (dspio_get_response_data(codec) >= 0) |
| spec->wait_scp = 0; |
| } |
| |
| dspio_clear_response_queue(codec); |
| } |
| |
| static void hp_callback(struct hda_codec *codec, struct hda_jack_callback *cb) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| struct hda_jack_tbl *tbl; |
| |
| /* Delay enabling the HP amp, to let the mic-detection |
| * state machine run. |
| */ |
| cancel_delayed_work(&spec->unsol_hp_work); |
| schedule_delayed_work(&spec->unsol_hp_work, msecs_to_jiffies(500)); |
| tbl = snd_hda_jack_tbl_get(codec, cb->nid); |
| if (tbl) |
| tbl->block_report = 1; |
| } |
| |
| static void amic_callback(struct hda_codec *codec, struct hda_jack_callback *cb) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| if (ca0132_use_alt_functions(spec)) |
| ca0132_alt_select_in(codec); |
| else |
| ca0132_select_mic(codec); |
| } |
| |
| static void ca0132_init_unsol(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| snd_hda_jack_detect_enable_callback(codec, spec->unsol_tag_hp, hp_callback); |
| snd_hda_jack_detect_enable_callback(codec, spec->unsol_tag_amic1, |
| amic_callback); |
| snd_hda_jack_detect_enable_callback(codec, UNSOL_TAG_DSP, |
| ca0132_process_dsp_response); |
| /* Front headphone jack detection */ |
| if (ca0132_use_alt_functions(spec)) |
| snd_hda_jack_detect_enable_callback(codec, |
| spec->unsol_tag_front_hp, hp_callback); |
| } |
| |
| /* |
| * Verbs tables. |
| */ |
| |
| /* Sends before DSP download. */ |
| static struct hda_verb ca0132_base_init_verbs[] = { |
| /*enable ct extension*/ |
| {0x15, VENDOR_CHIPIO_CT_EXTENSIONS_ENABLE, 0x1}, |
| {} |
| }; |
| |
| /* Send at exit. */ |
| static struct hda_verb ca0132_base_exit_verbs[] = { |
| /*set afg to D3*/ |
| {0x01, AC_VERB_SET_POWER_STATE, 0x03}, |
| /*disable ct extension*/ |
| {0x15, VENDOR_CHIPIO_CT_EXTENSIONS_ENABLE, 0}, |
| {} |
| }; |
| |
| /* Other verbs tables. Sends after DSP download. */ |
| |
| static struct hda_verb ca0132_init_verbs0[] = { |
| /* chip init verbs */ |
| {0x15, 0x70D, 0xF0}, |
| {0x15, 0x70E, 0xFE}, |
| {0x15, 0x707, 0x75}, |
| {0x15, 0x707, 0xD3}, |
| {0x15, 0x707, 0x09}, |
| {0x15, 0x707, 0x53}, |
| {0x15, 0x707, 0xD4}, |
| {0x15, 0x707, 0xEF}, |
| {0x15, 0x707, 0x75}, |
| {0x15, 0x707, 0xD3}, |
| {0x15, 0x707, 0x09}, |
| {0x15, 0x707, 0x02}, |
| {0x15, 0x707, 0x37}, |
| {0x15, 0x707, 0x78}, |
| {0x15, 0x53C, 0xCE}, |
| {0x15, 0x575, 0xC9}, |
| {0x15, 0x53D, 0xCE}, |
| {0x15, 0x5B7, 0xC9}, |
| {0x15, 0x70D, 0xE8}, |
| {0x15, 0x70E, 0xFE}, |
| {0x15, 0x707, 0x02}, |
| {0x15, 0x707, 0x68}, |
| {0x15, 0x707, 0x62}, |
| {0x15, 0x53A, 0xCE}, |
| {0x15, 0x546, 0xC9}, |
| {0x15, 0x53B, 0xCE}, |
| {0x15, 0x5E8, 0xC9}, |
| {} |
| }; |
| |
| /* Extra init verbs for desktop cards. */ |
| static struct hda_verb ca0132_init_verbs1[] = { |
| {0x15, 0x70D, 0x20}, |
| {0x15, 0x70E, 0x19}, |
| {0x15, 0x707, 0x00}, |
| {0x15, 0x539, 0xCE}, |
| {0x15, 0x546, 0xC9}, |
| {0x15, 0x70D, 0xB7}, |
| {0x15, 0x70E, 0x09}, |
| {0x15, 0x707, 0x10}, |
| {0x15, 0x70D, 0xAF}, |
| {0x15, 0x70E, 0x09}, |
| {0x15, 0x707, 0x01}, |
| {0x15, 0x707, 0x05}, |
| {0x15, 0x70D, 0x73}, |
| {0x15, 0x70E, 0x09}, |
| {0x15, 0x707, 0x14}, |
| {0x15, 0x6FF, 0xC4}, |
| {} |
| }; |
| |
| static void ca0132_init_chip(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| int num_fx; |
| int i; |
| unsigned int on; |
| |
| mutex_init(&spec->chipio_mutex); |
| |
| spec->cur_out_type = SPEAKER_OUT; |
| if (!ca0132_use_alt_functions(spec)) |
| spec->cur_mic_type = DIGITAL_MIC; |
| else |
| spec->cur_mic_type = REAR_MIC; |
| |
| spec->cur_mic_boost = 0; |
| |
| for (i = 0; i < VNODES_COUNT; i++) { |
| spec->vnode_lvol[i] = 0x5a; |
| spec->vnode_rvol[i] = 0x5a; |
| spec->vnode_lswitch[i] = 0; |
| spec->vnode_rswitch[i] = 0; |
| } |
| |
| /* |
| * Default states for effects are in ca0132_effects[]. |
| */ |
| num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT; |
| for (i = 0; i < num_fx; i++) { |
| on = (unsigned int)ca0132_effects[i].reqs[0]; |
| spec->effects_switch[i] = on ? 1 : 0; |
| } |
| /* |
| * Sets defaults for the effect slider controls, only for alternative |
| * ca0132 codecs. Also sets x-bass crossover frequency to 80hz. |
| */ |
| if (ca0132_use_alt_controls(spec)) { |
| spec->xbass_xover_freq = 8; |
| for (i = 0; i < EFFECT_LEVEL_SLIDERS; i++) |
| spec->fx_ctl_val[i] = effect_slider_defaults[i]; |
| } |
| |
| spec->voicefx_val = 0; |
| spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID] = 1; |
| spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID] = 0; |
| |
| /* |
| * The ZxR doesn't have a front panel header, and it's line-in is on |
| * the daughter board. So, there is no input enum control, and we need |
| * to make sure that spec->in_enum_val is set properly. |
| */ |
| if (ca0132_quirk(spec) == QUIRK_ZXR) |
| spec->in_enum_val = REAR_MIC; |
| |
| #ifdef ENABLE_TUNING_CONTROLS |
| ca0132_init_tuning_defaults(codec); |
| #endif |
| } |
| |
| /* |
| * Recon3Di exit specific commands. |
| */ |
| /* prevents popping noise on shutdown */ |
| static void r3di_gpio_shutdown(struct hda_codec *codec) |
| { |
| snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 0x00); |
| } |
| |
| /* |
| * Sound Blaster Z exit specific commands. |
| */ |
| static void sbz_region2_exit(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int i; |
| |
| for (i = 0; i < 4; i++) |
| writeb(0x0, spec->mem_base + 0x100); |
| for (i = 0; i < 8; i++) |
| writeb(0xb3, spec->mem_base + 0x304); |
| |
| ca0113_mmio_gpio_set(codec, 0, false); |
| ca0113_mmio_gpio_set(codec, 1, false); |
| ca0113_mmio_gpio_set(codec, 4, true); |
| ca0113_mmio_gpio_set(codec, 5, false); |
| ca0113_mmio_gpio_set(codec, 7, false); |
| } |
| |
| static void sbz_set_pin_ctl_default(struct hda_codec *codec) |
| { |
| hda_nid_t pins[5] = {0x0B, 0x0C, 0x0E, 0x12, 0x13}; |
| unsigned int i; |
| |
| snd_hda_codec_write(codec, 0x11, 0, |
| AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40); |
| |
| for (i = 0; i < 5; i++) |
| snd_hda_codec_write(codec, pins[i], 0, |
| AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00); |
| } |
| |
| static void ca0132_clear_unsolicited(struct hda_codec *codec) |
| { |
| hda_nid_t pins[7] = {0x0B, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13}; |
| unsigned int i; |
| |
| for (i = 0; i < 7; i++) { |
| snd_hda_codec_write(codec, pins[i], 0, |
| AC_VERB_SET_UNSOLICITED_ENABLE, 0x00); |
| } |
| } |
| |
| /* On shutdown, sends commands in sets of three */ |
| static void sbz_gpio_shutdown_commands(struct hda_codec *codec, int dir, |
| int mask, int data) |
| { |
| if (dir >= 0) |
| snd_hda_codec_write(codec, 0x01, 0, |
| AC_VERB_SET_GPIO_DIRECTION, dir); |
| if (mask >= 0) |
| snd_hda_codec_write(codec, 0x01, 0, |
| AC_VERB_SET_GPIO_MASK, mask); |
| |
| if (data >= 0) |
| snd_hda_codec_write(codec, 0x01, 0, |
| AC_VERB_SET_GPIO_DATA, data); |
| } |
| |
| static void zxr_dbpro_power_state_shutdown(struct hda_codec *codec) |
| { |
| hda_nid_t pins[7] = {0x05, 0x0c, 0x09, 0x0e, 0x08, 0x11, 0x01}; |
| unsigned int i; |
| |
| for (i = 0; i < 7; i++) |
| snd_hda_codec_write(codec, pins[i], 0, |
| AC_VERB_SET_POWER_STATE, 0x03); |
| } |
| |
| static void sbz_exit_chip(struct hda_codec *codec) |
| { |
| chipio_set_stream_control(codec, 0x03, 0); |
| chipio_set_stream_control(codec, 0x04, 0); |
| |
| /* Mess with GPIO */ |
| sbz_gpio_shutdown_commands(codec, 0x07, 0x07, -1); |
| sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x05); |
| sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x01); |
| |
| chipio_set_stream_control(codec, 0x14, 0); |
| chipio_set_stream_control(codec, 0x0C, 0); |
| |
| chipio_set_conn_rate(codec, 0x41, SR_192_000); |
| chipio_set_conn_rate(codec, 0x91, SR_192_000); |
| |
| chipio_write(codec, 0x18a020, 0x00000083); |
| |
| sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x03); |
| sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x07); |
| sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x06); |
| |
| chipio_set_stream_control(codec, 0x0C, 0); |
| |
| chipio_set_control_param(codec, 0x0D, 0x24); |
| |
| ca0132_clear_unsolicited(codec); |
| sbz_set_pin_ctl_default(codec); |
| |
| snd_hda_codec_write(codec, 0x0B, 0, |
| AC_VERB_SET_EAPD_BTLENABLE, 0x00); |
| |
| sbz_region2_exit(codec); |
| } |
| |
| static void r3d_exit_chip(struct hda_codec *codec) |
| { |
| ca0132_clear_unsolicited(codec); |
| snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00); |
| snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x5b); |
| } |
| |
| static void ae5_exit_chip(struct hda_codec *codec) |
| { |
| chipio_set_stream_control(codec, 0x03, 0); |
| chipio_set_stream_control(codec, 0x04, 0); |
| |
| ca0113_mmio_command_set(codec, 0x30, 0x32, 0x3f); |
| ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83); |
| ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83); |
| ca0113_mmio_command_set(codec, 0x30, 0x30, 0x00); |
| ca0113_mmio_command_set(codec, 0x30, 0x2b, 0x00); |
| ca0113_mmio_command_set(codec, 0x30, 0x2d, 0x00); |
| ca0113_mmio_gpio_set(codec, 0, false); |
| ca0113_mmio_gpio_set(codec, 1, false); |
| |
| snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00); |
| snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x53); |
| |
| chipio_set_control_param(codec, CONTROL_PARAM_ASI, 0); |
| |
| chipio_set_stream_control(codec, 0x18, 0); |
| chipio_set_stream_control(codec, 0x0c, 0); |
| |
| snd_hda_codec_write(codec, 0x01, 0, 0x724, 0x83); |
| } |
| |
| static void zxr_exit_chip(struct hda_codec *codec) |
| { |
| chipio_set_stream_control(codec, 0x03, 0); |
| chipio_set_stream_control(codec, 0x04, 0); |
| chipio_set_stream_control(codec, 0x14, 0); |
| chipio_set_stream_control(codec, 0x0C, 0); |
| |
| chipio_set_conn_rate(codec, 0x41, SR_192_000); |
| chipio_set_conn_rate(codec, 0x91, SR_192_000); |
| |
| chipio_write(codec, 0x18a020, 0x00000083); |
| |
| snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00); |
| snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x53); |
| |
| ca0132_clear_unsolicited(codec); |
| sbz_set_pin_ctl_default(codec); |
| snd_hda_codec_write(codec, 0x0B, 0, AC_VERB_SET_EAPD_BTLENABLE, 0x00); |
| |
| ca0113_mmio_gpio_set(codec, 5, false); |
| ca0113_mmio_gpio_set(codec, 2, false); |
| ca0113_mmio_gpio_set(codec, 3, false); |
| ca0113_mmio_gpio_set(codec, 0, false); |
| ca0113_mmio_gpio_set(codec, 4, true); |
| ca0113_mmio_gpio_set(codec, 0, true); |
| ca0113_mmio_gpio_set(codec, 5, true); |
| ca0113_mmio_gpio_set(codec, 2, false); |
| ca0113_mmio_gpio_set(codec, 3, false); |
| } |
| |
| static void ca0132_exit_chip(struct hda_codec *codec) |
| { |
| /* put any chip cleanup stuffs here. */ |
| |
| if (dspload_is_loaded(codec)) |
| dsp_reset(codec); |
| } |
| |
| /* |
| * This fixes a problem that was hard to reproduce. Very rarely, I would |
| * boot up, and there would be no sound, but the DSP indicated it had loaded |
| * properly. I did a few memory dumps to see if anything was different, and |
| * there were a few areas of memory uninitialized with a1a2a3a4. This function |
| * checks if those areas are uninitialized, and if they are, it'll attempt to |
| * reload the card 3 times. Usually it fixes by the second. |
| */ |
| static void sbz_dsp_startup_check(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| unsigned int dsp_data_check[4]; |
| unsigned int cur_address = 0x390; |
| unsigned int i; |
| unsigned int failure = 0; |
| unsigned int reload = 3; |
| |
| if (spec->startup_check_entered) |
| return; |
| |
| spec->startup_check_entered = true; |
| |
| for (i = 0; i < 4; i++) { |
| chipio_read(codec, cur_address, &dsp_data_check[i]); |
| cur_address += 0x4; |
| } |
| for (i = 0; i < 4; i++) { |
| if (dsp_data_check[i] == 0xa1a2a3a4) |
| failure = 1; |
| } |
| |
| codec_dbg(codec, "Startup Check: %d ", failure); |
| if (failure) |
| codec_info(codec, "DSP not initialized properly. Attempting to fix."); |
| /* |
| * While the failure condition is true, and we haven't reached our |
| * three reload limit, continue trying to reload the driver and |
| * fix the issue. |
| */ |
| while (failure && (reload != 0)) { |
| codec_info(codec, "Reloading... Tries left: %d", reload); |
| sbz_exit_chip(codec); |
| spec->dsp_state = DSP_DOWNLOAD_INIT; |
| codec->patch_ops.init(codec); |
| failure = 0; |
| for (i = 0; i < 4; i++) { |
| chipio_read(codec, cur_address, &dsp_data_check[i]); |
| cur_address += 0x4; |
| } |
| for (i = 0; i < 4; i++) { |
| if (dsp_data_check[i] == 0xa1a2a3a4) |
| failure = 1; |
| } |
| reload--; |
| } |
| |
| if (!failure && reload < 3) |
| codec_info(codec, "DSP fixed."); |
| |
| if (!failure) |
| return; |
| |
| codec_info(codec, "DSP failed to initialize properly. Either try a full shutdown or a suspend to clear the internal memory."); |
| } |
| |
| /* |
| * This is for the extra volume verbs 0x797 (left) and 0x798 (right). These add |
| * extra precision for decibel values. If you had the dB value in floating point |
| * you would take the value after the decimal point, multiply by 64, and divide |
| * by 2. So for 8.59, it's (59 * 64) / 100. Useful if someone wanted to |
| * implement fixed point or floating point dB volumes. For now, I'll set them |
| * to 0 just incase a value has lingered from a boot into Windows. |
| */ |
| static void ca0132_alt_vol_setup(struct hda_codec *codec) |
| { |
| snd_hda_codec_write(codec, 0x02, 0, 0x797, 0x00); |
| snd_hda_codec_write(codec, 0x02, 0, 0x798, 0x00); |
| snd_hda_codec_write(codec, 0x03, 0, 0x797, 0x00); |
| snd_hda_codec_write(codec, 0x03, 0, 0x798, 0x00); |
| snd_hda_codec_write(codec, 0x04, 0, 0x797, 0x00); |
| snd_hda_codec_write(codec, 0x04, 0, 0x798, 0x00); |
| snd_hda_codec_write(codec, 0x07, 0, 0x797, 0x00); |
| snd_hda_codec_write(codec, 0x07, 0, 0x798, 0x00); |
| } |
| |
| /* |
| * Extra commands that don't really fit anywhere else. |
| */ |
| static void sbz_pre_dsp_setup(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| writel(0x00820680, spec->mem_base + 0x01C); |
| writel(0x00820680, spec->mem_base + 0x01C); |
| |
| chipio_write(codec, 0x18b0a4, 0x000000c2); |
| |
| snd_hda_codec_write(codec, 0x11, 0, |
| AC_VERB_SET_PIN_WIDGET_CONTROL, 0x44); |
| } |
| |
| static void r3d_pre_dsp_setup(struct hda_codec *codec) |
| { |
| chipio_write(codec, 0x18b0a4, 0x000000c2); |
| |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x1E); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0x1C); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_DATA_WRITE, 0x5B); |
| |
| snd_hda_codec_write(codec, 0x11, 0, |
| AC_VERB_SET_PIN_WIDGET_CONTROL, 0x44); |
| } |
| |
| static void r3di_pre_dsp_setup(struct hda_codec *codec) |
| { |
| chipio_write(codec, 0x18b0a4, 0x000000c2); |
| |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x1E); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0x1C); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_DATA_WRITE, 0x5B); |
| |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x20); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0x19); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_DATA_WRITE, 0x00); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_DATA_WRITE, 0x40); |
| |
| snd_hda_codec_write(codec, 0x11, 0, |
| AC_VERB_SET_PIN_WIDGET_CONTROL, 0x04); |
| } |
| |
| /* |
| * These are sent before the DSP is downloaded. Not sure |
| * what they do, or if they're necessary. Could possibly |
| * be removed. Figure they're better to leave in. |
| */ |
| static void ca0132_mmio_init(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| if (ca0132_quirk(spec) == QUIRK_AE5) |
| writel(0x00000001, spec->mem_base + 0x400); |
| else |
| writel(0x00000000, spec->mem_base + 0x400); |
| |
| if (ca0132_quirk(spec) == QUIRK_AE5) |
| writel(0x00000001, spec->mem_base + 0x408); |
| else |
| writel(0x00000000, spec->mem_base + 0x408); |
| |
| if (ca0132_quirk(spec) == QUIRK_AE5) |
| writel(0x00000001, spec->mem_base + 0x40c); |
| else |
| writel(0x00000000, spec->mem_base + 0x40C); |
| |
| if (ca0132_quirk(spec) == QUIRK_ZXR) |
| writel(0x00880640, spec->mem_base + 0x01C); |
| else |
| writel(0x00880680, spec->mem_base + 0x01C); |
| |
| if (ca0132_quirk(spec) == QUIRK_AE5) |
| writel(0x00000080, spec->mem_base + 0xC0C); |
| else |
| writel(0x00000083, spec->mem_base + 0xC0C); |
| |
| writel(0x00000030, spec->mem_base + 0xC00); |
| writel(0x00000000, spec->mem_base + 0xC04); |
| |
| if (ca0132_quirk(spec) == QUIRK_AE5) |
| writel(0x00000000, spec->mem_base + 0xC0C); |
| else |
| writel(0x00000003, spec->mem_base + 0xC0C); |
| |
| writel(0x00000003, spec->mem_base + 0xC0C); |
| writel(0x00000003, spec->mem_base + 0xC0C); |
| writel(0x00000003, spec->mem_base + 0xC0C); |
| |
| if (ca0132_quirk(spec) == QUIRK_AE5) |
| writel(0x00000001, spec->mem_base + 0xC08); |
| else |
| writel(0x000000C1, spec->mem_base + 0xC08); |
| |
| writel(0x000000F1, spec->mem_base + 0xC08); |
| writel(0x00000001, spec->mem_base + 0xC08); |
| writel(0x000000C7, spec->mem_base + 0xC08); |
| writel(0x000000C1, spec->mem_base + 0xC08); |
| writel(0x00000080, spec->mem_base + 0xC04); |
| |
| if (ca0132_quirk(spec) == QUIRK_AE5) { |
| writel(0x00000000, spec->mem_base + 0x42c); |
| writel(0x00000000, spec->mem_base + 0x46c); |
| writel(0x00000000, spec->mem_base + 0x4ac); |
| writel(0x00000000, spec->mem_base + 0x4ec); |
| writel(0x00000000, spec->mem_base + 0x43c); |
| writel(0x00000000, spec->mem_base + 0x47c); |
| writel(0x00000000, spec->mem_base + 0x4bc); |
| writel(0x00000000, spec->mem_base + 0x4fc); |
| writel(0x00000600, spec->mem_base + 0x100); |
| writel(0x00000014, spec->mem_base + 0x410); |
| writel(0x0000060f, spec->mem_base + 0x100); |
| writel(0x0000070f, spec->mem_base + 0x100); |
| writel(0x00000aff, spec->mem_base + 0x830); |
| writel(0x00000000, spec->mem_base + 0x86c); |
| writel(0x0000006b, spec->mem_base + 0x800); |
| writel(0x00000001, spec->mem_base + 0x86c); |
| writel(0x0000006b, spec->mem_base + 0x800); |
| writel(0x00000057, spec->mem_base + 0x804); |
| writel(0x00800000, spec->mem_base + 0x20c); |
| } |
| } |
| |
| /* |
| * This function writes to some SFR's, does some region2 writes, and then |
| * eventually resets the codec with the 0x7ff verb. Not quite sure why it does |
| * what it does. |
| */ |
| static void ae5_register_set(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| chipio_8051_write_direct(codec, 0x93, 0x10); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x44); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc2); |
| |
| writeb(0x0f, spec->mem_base + 0x304); |
| writeb(0x0f, spec->mem_base + 0x304); |
| writeb(0x0f, spec->mem_base + 0x304); |
| writeb(0x0f, spec->mem_base + 0x304); |
| writeb(0x0e, spec->mem_base + 0x100); |
| writeb(0x1f, spec->mem_base + 0x304); |
| writeb(0x0c, spec->mem_base + 0x100); |
| writeb(0x3f, spec->mem_base + 0x304); |
| writeb(0x08, spec->mem_base + 0x100); |
| writeb(0x7f, spec->mem_base + 0x304); |
| writeb(0x00, spec->mem_base + 0x100); |
| writeb(0xff, spec->mem_base + 0x304); |
| |
| ca0113_mmio_command_set(codec, 0x30, 0x2d, 0x3f); |
| |
| chipio_8051_write_direct(codec, 0x90, 0x00); |
| chipio_8051_write_direct(codec, 0x90, 0x10); |
| |
| ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83); |
| |
| chipio_write(codec, 0x18b0a4, 0x000000c2); |
| |
| snd_hda_codec_write(codec, 0x01, 0, 0x7ff, 0x00); |
| snd_hda_codec_write(codec, 0x01, 0, 0x7ff, 0x00); |
| } |
| |
| /* |
| * Extra init functions for alternative ca0132 codecs. Done |
| * here so they don't clutter up the main ca0132_init function |
| * anymore than they have to. |
| */ |
| static void ca0132_alt_init(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| ca0132_alt_vol_setup(codec); |
| |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| codec_dbg(codec, "SBZ alt_init"); |
| ca0132_gpio_init(codec); |
| sbz_pre_dsp_setup(codec); |
| snd_hda_sequence_write(codec, spec->chip_init_verbs); |
| snd_hda_sequence_write(codec, spec->desktop_init_verbs); |
| break; |
| case QUIRK_R3DI: |
| codec_dbg(codec, "R3DI alt_init"); |
| ca0132_gpio_init(codec); |
| ca0132_gpio_setup(codec); |
| r3di_gpio_dsp_status_set(codec, R3DI_DSP_DOWNLOADING); |
| r3di_pre_dsp_setup(codec); |
| snd_hda_sequence_write(codec, spec->chip_init_verbs); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x6FF, 0xC4); |
| break; |
| case QUIRK_R3D: |
| r3d_pre_dsp_setup(codec); |
| snd_hda_sequence_write(codec, spec->chip_init_verbs); |
| snd_hda_sequence_write(codec, spec->desktop_init_verbs); |
| break; |
| case QUIRK_AE5: |
| ca0132_gpio_init(codec); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x49); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PLL_PMU_WRITE, 0x88); |
| chipio_write(codec, 0x18b030, 0x00000020); |
| snd_hda_sequence_write(codec, spec->chip_init_verbs); |
| snd_hda_sequence_write(codec, spec->desktop_init_verbs); |
| ca0113_mmio_command_set(codec, 0x30, 0x32, 0x3f); |
| break; |
| case QUIRK_ZXR: |
| snd_hda_sequence_write(codec, spec->chip_init_verbs); |
| snd_hda_sequence_write(codec, spec->desktop_init_verbs); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static int ca0132_init(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| struct auto_pin_cfg *cfg = &spec->autocfg; |
| int i; |
| bool dsp_loaded; |
| |
| /* |
| * If the DSP is already downloaded, and init has been entered again, |
| * there's only two reasons for it. One, the codec has awaken from a |
| * suspended state, and in that case dspload_is_loaded will return |
| * false, and the init will be ran again. The other reason it gets |
| * re entered is on startup for some reason it triggers a suspend and |
| * resume state. In this case, it will check if the DSP is downloaded, |
| * and not run the init function again. For codecs using alt_functions, |
| * it will check if the DSP is loaded properly. |
| */ |
| if (spec->dsp_state == DSP_DOWNLOADED) { |
| dsp_loaded = dspload_is_loaded(codec); |
| if (!dsp_loaded) { |
| spec->dsp_reload = true; |
| spec->dsp_state = DSP_DOWNLOAD_INIT; |
| } else { |
| if (ca0132_quirk(spec) == QUIRK_SBZ) |
| sbz_dsp_startup_check(codec); |
| return 0; |
| } |
| } |
| |
| if (spec->dsp_state != DSP_DOWNLOAD_FAILED) |
| spec->dsp_state = DSP_DOWNLOAD_INIT; |
| spec->curr_chip_addx = INVALID_CHIP_ADDRESS; |
| |
| if (ca0132_use_pci_mmio(spec)) |
| ca0132_mmio_init(codec); |
| |
| snd_hda_power_up_pm(codec); |
| |
| if (ca0132_quirk(spec) == QUIRK_AE5) |
| ae5_register_set(codec); |
| |
| ca0132_init_unsol(codec); |
| ca0132_init_params(codec); |
| ca0132_init_flags(codec); |
| |
| snd_hda_sequence_write(codec, spec->base_init_verbs); |
| |
| if (ca0132_use_alt_functions(spec)) |
| ca0132_alt_init(codec); |
| |
| ca0132_download_dsp(codec); |
| |
| ca0132_refresh_widget_caps(codec); |
| |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_R3DI: |
| case QUIRK_R3D: |
| r3d_setup_defaults(codec); |
| break; |
| case QUIRK_SBZ: |
| case QUIRK_ZXR: |
| sbz_setup_defaults(codec); |
| break; |
| case QUIRK_AE5: |
| ae5_setup_defaults(codec); |
| break; |
| default: |
| ca0132_setup_defaults(codec); |
| ca0132_init_analog_mic2(codec); |
| ca0132_init_dmic(codec); |
| break; |
| } |
| |
| for (i = 0; i < spec->num_outputs; i++) |
| init_output(codec, spec->out_pins[i], spec->dacs[0]); |
| |
| init_output(codec, cfg->dig_out_pins[0], spec->dig_out); |
| |
| for (i = 0; i < spec->num_inputs; i++) |
| init_input(codec, spec->input_pins[i], spec->adcs[i]); |
| |
| init_input(codec, cfg->dig_in_pin, spec->dig_in); |
| |
| if (!ca0132_use_alt_functions(spec)) { |
| snd_hda_sequence_write(codec, spec->chip_init_verbs); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PARAM_EX_ID_SET, 0x0D); |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, |
| VENDOR_CHIPIO_PARAM_EX_VALUE_SET, 0x20); |
| } |
| |
| if (ca0132_quirk(spec) == QUIRK_SBZ) |
| ca0132_gpio_setup(codec); |
| |
| snd_hda_sequence_write(codec, spec->spec_init_verbs); |
| if (ca0132_use_alt_functions(spec)) { |
| ca0132_alt_select_out(codec); |
| ca0132_alt_select_in(codec); |
| } else { |
| ca0132_select_out(codec); |
| ca0132_select_mic(codec); |
| } |
| |
| snd_hda_jack_report_sync(codec); |
| |
| /* |
| * Re set the PlayEnhancement switch on a resume event, because the |
| * controls will not be reloaded. |
| */ |
| if (spec->dsp_reload) { |
| spec->dsp_reload = false; |
| ca0132_pe_switch_set(codec); |
| } |
| |
| snd_hda_power_down_pm(codec); |
| |
| return 0; |
| } |
| |
| static int dbpro_init(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| struct auto_pin_cfg *cfg = &spec->autocfg; |
| unsigned int i; |
| |
| init_output(codec, cfg->dig_out_pins[0], spec->dig_out); |
| init_input(codec, cfg->dig_in_pin, spec->dig_in); |
| |
| for (i = 0; i < spec->num_inputs; i++) |
| init_input(codec, spec->input_pins[i], spec->adcs[i]); |
| |
| return 0; |
| } |
| |
| static void ca0132_free(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| cancel_delayed_work_sync(&spec->unsol_hp_work); |
| snd_hda_power_up(codec); |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| sbz_exit_chip(codec); |
| break; |
| case QUIRK_ZXR: |
| zxr_exit_chip(codec); |
| break; |
| case QUIRK_R3D: |
| r3d_exit_chip(codec); |
| break; |
| case QUIRK_AE5: |
| ae5_exit_chip(codec); |
| break; |
| case QUIRK_R3DI: |
| r3di_gpio_shutdown(codec); |
| break; |
| default: |
| break; |
| } |
| |
| snd_hda_sequence_write(codec, spec->base_exit_verbs); |
| ca0132_exit_chip(codec); |
| |
| snd_hda_power_down(codec); |
| #ifdef CONFIG_PCI |
| if (spec->mem_base) |
| pci_iounmap(codec->bus->pci, spec->mem_base); |
| #endif |
| kfree(spec->spec_init_verbs); |
| kfree(codec->spec); |
| } |
| |
| static void dbpro_free(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| zxr_dbpro_power_state_shutdown(codec); |
| |
| kfree(spec->spec_init_verbs); |
| kfree(codec->spec); |
| } |
| |
| static void ca0132_reboot_notify(struct hda_codec *codec) |
| { |
| codec->patch_ops.free(codec); |
| } |
| |
| static const struct hda_codec_ops ca0132_patch_ops = { |
| .build_controls = ca0132_build_controls, |
| .build_pcms = ca0132_build_pcms, |
| .init = ca0132_init, |
| .free = ca0132_free, |
| .unsol_event = snd_hda_jack_unsol_event, |
| .reboot_notify = ca0132_reboot_notify, |
| }; |
| |
| static const struct hda_codec_ops dbpro_patch_ops = { |
| .build_controls = dbpro_build_controls, |
| .build_pcms = dbpro_build_pcms, |
| .init = dbpro_init, |
| .free = dbpro_free, |
| }; |
| |
| static void ca0132_config(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| spec->dacs[0] = 0x2; |
| spec->dacs[1] = 0x3; |
| spec->dacs[2] = 0x4; |
| |
| spec->multiout.dac_nids = spec->dacs; |
| spec->multiout.num_dacs = 3; |
| |
| if (!ca0132_use_alt_functions(spec)) |
| spec->multiout.max_channels = 2; |
| else |
| spec->multiout.max_channels = 6; |
| |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_ALIENWARE: |
| codec_dbg(codec, "%s: QUIRK_ALIENWARE applied.\n", __func__); |
| snd_hda_apply_pincfgs(codec, alienware_pincfgs); |
| break; |
| case QUIRK_SBZ: |
| codec_dbg(codec, "%s: QUIRK_SBZ applied.\n", __func__); |
| snd_hda_apply_pincfgs(codec, sbz_pincfgs); |
| break; |
| case QUIRK_ZXR: |
| codec_dbg(codec, "%s: QUIRK_ZXR applied.\n", __func__); |
| snd_hda_apply_pincfgs(codec, zxr_pincfgs); |
| break; |
| case QUIRK_R3D: |
| codec_dbg(codec, "%s: QUIRK_R3D applied.\n", __func__); |
| snd_hda_apply_pincfgs(codec, r3d_pincfgs); |
| break; |
| case QUIRK_R3DI: |
| codec_dbg(codec, "%s: QUIRK_R3DI applied.\n", __func__); |
| snd_hda_apply_pincfgs(codec, r3di_pincfgs); |
| break; |
| case QUIRK_AE5: |
| codec_dbg(codec, "%s: QUIRK_AE5 applied.\n", __func__); |
| snd_hda_apply_pincfgs(codec, ae5_pincfgs); |
| break; |
| default: |
| break; |
| } |
| |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_ALIENWARE: |
| spec->num_outputs = 2; |
| spec->out_pins[0] = 0x0b; /* speaker out */ |
| spec->out_pins[1] = 0x0f; |
| spec->shared_out_nid = 0x2; |
| spec->unsol_tag_hp = 0x0f; |
| |
| spec->adcs[0] = 0x7; /* digital mic / analog mic1 */ |
| spec->adcs[1] = 0x8; /* analog mic2 */ |
| spec->adcs[2] = 0xa; /* what u hear */ |
| |
| spec->num_inputs = 3; |
| spec->input_pins[0] = 0x12; |
| spec->input_pins[1] = 0x11; |
| spec->input_pins[2] = 0x13; |
| spec->shared_mic_nid = 0x7; |
| spec->unsol_tag_amic1 = 0x11; |
| break; |
| case QUIRK_SBZ: |
| case QUIRK_R3D: |
| spec->num_outputs = 2; |
| spec->out_pins[0] = 0x0B; /* Line out */ |
| spec->out_pins[1] = 0x0F; /* Rear headphone out */ |
| spec->out_pins[2] = 0x10; /* Front Headphone / Center/LFE*/ |
| spec->out_pins[3] = 0x11; /* Rear surround */ |
| spec->shared_out_nid = 0x2; |
| spec->unsol_tag_hp = spec->out_pins[1]; |
| spec->unsol_tag_front_hp = spec->out_pins[2]; |
| |
| spec->adcs[0] = 0x7; /* Rear Mic / Line-in */ |
| spec->adcs[1] = 0x8; /* Front Mic, but only if no DSP */ |
| spec->adcs[2] = 0xa; /* what u hear */ |
| |
| spec->num_inputs = 2; |
| spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */ |
| spec->input_pins[1] = 0x13; /* What U Hear */ |
| spec->shared_mic_nid = 0x7; |
| spec->unsol_tag_amic1 = spec->input_pins[0]; |
| |
| /* SPDIF I/O */ |
| spec->dig_out = 0x05; |
| spec->multiout.dig_out_nid = spec->dig_out; |
| spec->dig_in = 0x09; |
| break; |
| case QUIRK_ZXR: |
| spec->num_outputs = 2; |
| spec->out_pins[0] = 0x0B; /* Line out */ |
| spec->out_pins[1] = 0x0F; /* Rear headphone out */ |
| spec->out_pins[2] = 0x10; /* Center/LFE */ |
| spec->out_pins[3] = 0x11; /* Rear surround */ |
| spec->shared_out_nid = 0x2; |
| spec->unsol_tag_hp = spec->out_pins[1]; |
| spec->unsol_tag_front_hp = spec->out_pins[2]; |
| |
| spec->adcs[0] = 0x7; /* Rear Mic / Line-in */ |
| spec->adcs[1] = 0x8; /* Not connected, no front mic */ |
| spec->adcs[2] = 0xa; /* what u hear */ |
| |
| spec->num_inputs = 2; |
| spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */ |
| spec->input_pins[1] = 0x13; /* What U Hear */ |
| spec->shared_mic_nid = 0x7; |
| spec->unsol_tag_amic1 = spec->input_pins[0]; |
| break; |
| case QUIRK_ZXR_DBPRO: |
| spec->adcs[0] = 0x8; /* ZxR DBPro Aux In */ |
| |
| spec->num_inputs = 1; |
| spec->input_pins[0] = 0x11; /* RCA Line-in */ |
| |
| spec->dig_out = 0x05; |
| spec->multiout.dig_out_nid = spec->dig_out; |
| |
| spec->dig_in = 0x09; |
| break; |
| case QUIRK_AE5: |
| spec->num_outputs = 2; |
| spec->out_pins[0] = 0x0B; /* Line out */ |
| spec->out_pins[1] = 0x11; /* Rear headphone out */ |
| spec->out_pins[2] = 0x10; /* Front Headphone / Center/LFE*/ |
| spec->out_pins[3] = 0x0F; /* Rear surround */ |
| spec->shared_out_nid = 0x2; |
| spec->unsol_tag_hp = spec->out_pins[1]; |
| spec->unsol_tag_front_hp = spec->out_pins[2]; |
| |
| spec->adcs[0] = 0x7; /* Rear Mic / Line-in */ |
| spec->adcs[1] = 0x8; /* Front Mic, but only if no DSP */ |
| spec->adcs[2] = 0xa; /* what u hear */ |
| |
| spec->num_inputs = 2; |
| spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */ |
| spec->input_pins[1] = 0x13; /* What U Hear */ |
| spec->shared_mic_nid = 0x7; |
| spec->unsol_tag_amic1 = spec->input_pins[0]; |
| |
| /* SPDIF I/O */ |
| spec->dig_out = 0x05; |
| spec->multiout.dig_out_nid = spec->dig_out; |
| break; |
| case QUIRK_R3DI: |
| spec->num_outputs = 2; |
| spec->out_pins[0] = 0x0B; /* Line out */ |
| spec->out_pins[1] = 0x0F; /* Rear headphone out */ |
| spec->out_pins[2] = 0x10; /* Front Headphone / Center/LFE*/ |
| spec->out_pins[3] = 0x11; /* Rear surround */ |
| spec->shared_out_nid = 0x2; |
| spec->unsol_tag_hp = spec->out_pins[1]; |
| spec->unsol_tag_front_hp = spec->out_pins[2]; |
| |
| spec->adcs[0] = 0x07; /* Rear Mic / Line-in */ |
| spec->adcs[1] = 0x08; /* Front Mic, but only if no DSP */ |
| spec->adcs[2] = 0x0a; /* what u hear */ |
| |
| spec->num_inputs = 2; |
| spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */ |
| spec->input_pins[1] = 0x13; /* What U Hear */ |
| spec->shared_mic_nid = 0x7; |
| spec->unsol_tag_amic1 = spec->input_pins[0]; |
| |
| /* SPDIF I/O */ |
| spec->dig_out = 0x05; |
| spec->multiout.dig_out_nid = spec->dig_out; |
| break; |
| default: |
| spec->num_outputs = 2; |
| spec->out_pins[0] = 0x0b; /* speaker out */ |
| spec->out_pins[1] = 0x10; /* headphone out */ |
| spec->shared_out_nid = 0x2; |
| spec->unsol_tag_hp = spec->out_pins[1]; |
| |
| spec->adcs[0] = 0x7; /* digital mic / analog mic1 */ |
| spec->adcs[1] = 0x8; /* analog mic2 */ |
| spec->adcs[2] = 0xa; /* what u hear */ |
| |
| spec->num_inputs = 3; |
| spec->input_pins[0] = 0x12; |
| spec->input_pins[1] = 0x11; |
| spec->input_pins[2] = 0x13; |
| spec->shared_mic_nid = 0x7; |
| spec->unsol_tag_amic1 = spec->input_pins[0]; |
| |
| /* SPDIF I/O */ |
| spec->dig_out = 0x05; |
| spec->multiout.dig_out_nid = spec->dig_out; |
| spec->dig_in = 0x09; |
| break; |
| } |
| } |
| |
| static int ca0132_prepare_verbs(struct hda_codec *codec) |
| { |
| /* Verbs + terminator (an empty element) */ |
| #define NUM_SPEC_VERBS 2 |
| struct ca0132_spec *spec = codec->spec; |
| |
| spec->chip_init_verbs = ca0132_init_verbs0; |
| /* |
| * Since desktop cards use pci_mmio, this can be used to determine |
| * whether or not to use these verbs instead of a separate bool. |
| */ |
| if (ca0132_use_pci_mmio(spec)) |
| spec->desktop_init_verbs = ca0132_init_verbs1; |
| spec->spec_init_verbs = kcalloc(NUM_SPEC_VERBS, |
| sizeof(struct hda_verb), |
| GFP_KERNEL); |
| if (!spec->spec_init_verbs) |
| return -ENOMEM; |
| |
| /* config EAPD */ |
| spec->spec_init_verbs[0].nid = 0x0b; |
| spec->spec_init_verbs[0].param = 0x78D; |
| spec->spec_init_verbs[0].verb = 0x00; |
| |
| /* Previously commented configuration */ |
| /* |
| spec->spec_init_verbs[2].nid = 0x0b; |
| spec->spec_init_verbs[2].param = AC_VERB_SET_EAPD_BTLENABLE; |
| spec->spec_init_verbs[2].verb = 0x02; |
| |
| spec->spec_init_verbs[3].nid = 0x10; |
| spec->spec_init_verbs[3].param = 0x78D; |
| spec->spec_init_verbs[3].verb = 0x02; |
| |
| spec->spec_init_verbs[4].nid = 0x10; |
| spec->spec_init_verbs[4].param = AC_VERB_SET_EAPD_BTLENABLE; |
| spec->spec_init_verbs[4].verb = 0x02; |
| */ |
| |
| /* Terminator: spec->spec_init_verbs[NUM_SPEC_VERBS-1] */ |
| return 0; |
| } |
| |
| /* |
| * The Sound Blaster ZxR shares the same PCI subsystem ID as some regular |
| * Sound Blaster Z cards. However, they have different HDA codec subsystem |
| * ID's. So, we check for the ZxR's subsystem ID, as well as the DBPro |
| * daughter boards ID. |
| */ |
| static void sbz_detect_quirk(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec = codec->spec; |
| |
| switch (codec->core.subsystem_id) { |
| case 0x11020033: |
| spec->quirk = QUIRK_ZXR; |
| break; |
| case 0x1102003f: |
| spec->quirk = QUIRK_ZXR_DBPRO; |
| break; |
| default: |
| spec->quirk = QUIRK_SBZ; |
| break; |
| } |
| } |
| |
| static int patch_ca0132(struct hda_codec *codec) |
| { |
| struct ca0132_spec *spec; |
| int err; |
| const struct snd_pci_quirk *quirk; |
| |
| codec_dbg(codec, "patch_ca0132\n"); |
| |
| spec = kzalloc(sizeof(*spec), GFP_KERNEL); |
| if (!spec) |
| return -ENOMEM; |
| codec->spec = spec; |
| spec->codec = codec; |
| |
| /* Detect codec quirk */ |
| quirk = snd_pci_quirk_lookup(codec->bus->pci, ca0132_quirks); |
| if (quirk) |
| spec->quirk = quirk->value; |
| else |
| spec->quirk = QUIRK_NONE; |
| if (ca0132_quirk(spec) == QUIRK_SBZ) |
| sbz_detect_quirk(codec); |
| |
| if (ca0132_quirk(spec) == QUIRK_ZXR_DBPRO) |
| codec->patch_ops = dbpro_patch_ops; |
| else |
| codec->patch_ops = ca0132_patch_ops; |
| |
| codec->pcm_format_first = 1; |
| codec->no_sticky_stream = 1; |
| |
| |
| spec->dsp_state = DSP_DOWNLOAD_INIT; |
| spec->num_mixers = 1; |
| |
| /* Set which mixers each quirk uses. */ |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| spec->mixers[0] = desktop_mixer; |
| snd_hda_codec_set_name(codec, "Sound Blaster Z"); |
| break; |
| case QUIRK_ZXR: |
| spec->mixers[0] = desktop_mixer; |
| snd_hda_codec_set_name(codec, "Sound Blaster ZxR"); |
| break; |
| case QUIRK_ZXR_DBPRO: |
| break; |
| case QUIRK_R3D: |
| spec->mixers[0] = desktop_mixer; |
| snd_hda_codec_set_name(codec, "Recon3D"); |
| break; |
| case QUIRK_R3DI: |
| spec->mixers[0] = r3di_mixer; |
| snd_hda_codec_set_name(codec, "Recon3Di"); |
| break; |
| case QUIRK_AE5: |
| spec->mixers[0] = desktop_mixer; |
| snd_hda_codec_set_name(codec, "Sound BlasterX AE-5"); |
| break; |
| default: |
| spec->mixers[0] = ca0132_mixer; |
| break; |
| } |
| |
| /* Setup whether or not to use alt functions/controls/pci_mmio */ |
| switch (ca0132_quirk(spec)) { |
| case QUIRK_SBZ: |
| case QUIRK_R3D: |
| case QUIRK_AE5: |
| case QUIRK_ZXR: |
| spec->use_alt_controls = true; |
| spec->use_alt_functions = true; |
| spec->use_pci_mmio = true; |
| break; |
| case QUIRK_R3DI: |
| spec->use_alt_controls = true; |
| spec->use_alt_functions = true; |
| spec->use_pci_mmio = false; |
| break; |
| default: |
| spec->use_alt_controls = false; |
| spec->use_alt_functions = false; |
| spec->use_pci_mmio = false; |
| break; |
| } |
| |
| #ifdef CONFIG_PCI |
| if (spec->use_pci_mmio) { |
| spec->mem_base = pci_iomap(codec->bus->pci, 2, 0xC20); |
| if (spec->mem_base == NULL) { |
| codec_warn(codec, "pci_iomap failed! Setting quirk to QUIRK_NONE."); |
| spec->quirk = QUIRK_NONE; |
| } |
| } |
| #endif |
| |
| spec->base_init_verbs = ca0132_base_init_verbs; |
| spec->base_exit_verbs = ca0132_base_exit_verbs; |
| |
| INIT_DELAYED_WORK(&spec->unsol_hp_work, ca0132_unsol_hp_delayed); |
| |
| ca0132_init_chip(codec); |
| |
| ca0132_config(codec); |
| |
| err = ca0132_prepare_verbs(codec); |
| if (err < 0) |
| goto error; |
| |
| err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL); |
| if (err < 0) |
| goto error; |
| |
| return 0; |
| |
| error: |
| ca0132_free(codec); |
| return err; |
| } |
| |
| /* |
| * patch entries |
| */ |
| static struct hda_device_id snd_hda_id_ca0132[] = { |
| HDA_CODEC_ENTRY(0x11020011, "CA0132", patch_ca0132), |
| {} /* terminator */ |
| }; |
| MODULE_DEVICE_TABLE(hdaudio, snd_hda_id_ca0132); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Creative Sound Core3D codec"); |
| |
| static struct hda_codec_driver ca0132_driver = { |
| .id = snd_hda_id_ca0132, |
| }; |
| |
| module_hda_codec_driver(ca0132_driver); |