| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Bitmain BM1880 SoC clock driver |
| * |
| * Copyright (c) 2019 Linaro Ltd. |
| * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| #include <dt-bindings/clock/bm1880-clock.h> |
| |
| #define BM1880_CLK_MPLL_CTL 0x00 |
| #define BM1880_CLK_SPLL_CTL 0x04 |
| #define BM1880_CLK_FPLL_CTL 0x08 |
| #define BM1880_CLK_DDRPLL_CTL 0x0c |
| |
| #define BM1880_CLK_ENABLE0 0x00 |
| #define BM1880_CLK_ENABLE1 0x04 |
| #define BM1880_CLK_SELECT 0x20 |
| #define BM1880_CLK_DIV0 0x40 |
| #define BM1880_CLK_DIV1 0x44 |
| #define BM1880_CLK_DIV2 0x48 |
| #define BM1880_CLK_DIV3 0x4c |
| #define BM1880_CLK_DIV4 0x50 |
| #define BM1880_CLK_DIV5 0x54 |
| #define BM1880_CLK_DIV6 0x58 |
| #define BM1880_CLK_DIV7 0x5c |
| #define BM1880_CLK_DIV8 0x60 |
| #define BM1880_CLK_DIV9 0x64 |
| #define BM1880_CLK_DIV10 0x68 |
| #define BM1880_CLK_DIV11 0x6c |
| #define BM1880_CLK_DIV12 0x70 |
| #define BM1880_CLK_DIV13 0x74 |
| #define BM1880_CLK_DIV14 0x78 |
| #define BM1880_CLK_DIV15 0x7c |
| #define BM1880_CLK_DIV16 0x80 |
| #define BM1880_CLK_DIV17 0x84 |
| #define BM1880_CLK_DIV18 0x88 |
| #define BM1880_CLK_DIV19 0x8c |
| #define BM1880_CLK_DIV20 0x90 |
| #define BM1880_CLK_DIV21 0x94 |
| #define BM1880_CLK_DIV22 0x98 |
| #define BM1880_CLK_DIV23 0x9c |
| #define BM1880_CLK_DIV24 0xa0 |
| #define BM1880_CLK_DIV25 0xa4 |
| #define BM1880_CLK_DIV26 0xa8 |
| #define BM1880_CLK_DIV27 0xac |
| #define BM1880_CLK_DIV28 0xb0 |
| |
| #define to_bm1880_pll_clk(_hw) container_of(_hw, struct bm1880_pll_hw_clock, hw) |
| #define to_bm1880_div_clk(_hw) container_of(_hw, struct bm1880_div_hw_clock, hw) |
| |
| static DEFINE_SPINLOCK(bm1880_clk_lock); |
| |
| struct bm1880_clock_data { |
| void __iomem *pll_base; |
| void __iomem *sys_base; |
| struct clk_hw_onecell_data hw_data; |
| }; |
| |
| struct bm1880_gate_clock { |
| unsigned int id; |
| const char *name; |
| const char *parent; |
| u32 gate_reg; |
| s8 gate_shift; |
| unsigned long flags; |
| }; |
| |
| struct bm1880_mux_clock { |
| unsigned int id; |
| const char *name; |
| const char * const *parents; |
| s8 num_parents; |
| u32 reg; |
| s8 shift; |
| unsigned long flags; |
| }; |
| |
| struct bm1880_div_clock { |
| unsigned int id; |
| const char *name; |
| u32 reg; |
| u8 shift; |
| u8 width; |
| u32 initval; |
| const struct clk_div_table *table; |
| unsigned long flags; |
| }; |
| |
| struct bm1880_div_hw_clock { |
| struct bm1880_div_clock div; |
| void __iomem *base; |
| spinlock_t *lock; |
| struct clk_hw hw; |
| struct clk_init_data init; |
| }; |
| |
| struct bm1880_composite_clock { |
| unsigned int id; |
| const char *name; |
| const char *parent; |
| const char * const *parents; |
| unsigned int num_parents; |
| unsigned long flags; |
| |
| u32 gate_reg; |
| u32 mux_reg; |
| u32 div_reg; |
| |
| s8 gate_shift; |
| s8 mux_shift; |
| s8 div_shift; |
| s8 div_width; |
| s16 div_initval; |
| const struct clk_div_table *table; |
| }; |
| |
| struct bm1880_pll_clock { |
| unsigned int id; |
| const char *name; |
| u32 reg; |
| unsigned long flags; |
| }; |
| |
| struct bm1880_pll_hw_clock { |
| struct bm1880_pll_clock pll; |
| void __iomem *base; |
| struct clk_hw hw; |
| struct clk_init_data init; |
| }; |
| |
| static const struct clk_ops bm1880_pll_ops; |
| static const struct clk_ops bm1880_clk_div_ops; |
| |
| #define GATE_DIV(_id, _name, _parent, _gate_reg, _gate_shift, _div_reg, \ |
| _div_shift, _div_width, _div_initval, _table, \ |
| _flags) { \ |
| .id = _id, \ |
| .parent = _parent, \ |
| .name = _name, \ |
| .gate_reg = _gate_reg, \ |
| .gate_shift = _gate_shift, \ |
| .div_reg = _div_reg, \ |
| .div_shift = _div_shift, \ |
| .div_width = _div_width, \ |
| .div_initval = _div_initval, \ |
| .table = _table, \ |
| .mux_shift = -1, \ |
| .flags = _flags, \ |
| } |
| |
| #define GATE_MUX(_id, _name, _parents, _gate_reg, _gate_shift, \ |
| _mux_reg, _mux_shift, _flags) { \ |
| .id = _id, \ |
| .parents = _parents, \ |
| .num_parents = ARRAY_SIZE(_parents), \ |
| .name = _name, \ |
| .gate_reg = _gate_reg, \ |
| .gate_shift = _gate_shift, \ |
| .div_shift = -1, \ |
| .mux_reg = _mux_reg, \ |
| .mux_shift = _mux_shift, \ |
| .flags = _flags, \ |
| } |
| |
| #define CLK_PLL(_id, _name, _parent, _reg, _flags) { \ |
| .pll.id = _id, \ |
| .pll.name = _name, \ |
| .pll.reg = _reg, \ |
| .hw.init = CLK_HW_INIT_PARENTS_DATA(_name, _parent, \ |
| &bm1880_pll_ops, \ |
| _flags), \ |
| } |
| |
| #define CLK_DIV(_id, _name, _parent, _reg, _shift, _width, _initval, \ |
| _table, _flags) { \ |
| .div.id = _id, \ |
| .div.name = _name, \ |
| .div.reg = _reg, \ |
| .div.shift = _shift, \ |
| .div.width = _width, \ |
| .div.initval = _initval, \ |
| .div.table = _table, \ |
| .hw.init = CLK_HW_INIT_HW(_name, _parent, \ |
| &bm1880_clk_div_ops, \ |
| _flags), \ |
| } |
| |
| static struct clk_parent_data bm1880_pll_parent[] = { |
| { .fw_name = "osc", .name = "osc" }, |
| }; |
| |
| /* |
| * All PLL clocks are marked as CRITICAL, hence they are very crucial |
| * for the functioning of the SoC |
| */ |
| static struct bm1880_pll_hw_clock bm1880_pll_clks[] = { |
| CLK_PLL(BM1880_CLK_MPLL, "clk_mpll", bm1880_pll_parent, |
| BM1880_CLK_MPLL_CTL, 0), |
| CLK_PLL(BM1880_CLK_SPLL, "clk_spll", bm1880_pll_parent, |
| BM1880_CLK_SPLL_CTL, 0), |
| CLK_PLL(BM1880_CLK_FPLL, "clk_fpll", bm1880_pll_parent, |
| BM1880_CLK_FPLL_CTL, 0), |
| CLK_PLL(BM1880_CLK_DDRPLL, "clk_ddrpll", bm1880_pll_parent, |
| BM1880_CLK_DDRPLL_CTL, 0), |
| }; |
| |
| /* |
| * Clocks marked as CRITICAL are needed for the proper functioning |
| * of the SoC. |
| */ |
| static const struct bm1880_gate_clock bm1880_gate_clks[] = { |
| { BM1880_CLK_AHB_ROM, "clk_ahb_rom", "clk_mux_axi6", |
| BM1880_CLK_ENABLE0, 2, 0 }, |
| { BM1880_CLK_AXI_SRAM, "clk_axi_sram", "clk_axi1", |
| BM1880_CLK_ENABLE0, 3, 0 }, |
| /* |
| * Since this clock is sourcing the DDR memory, let's mark it as |
| * critical to avoid gating. |
| */ |
| { BM1880_CLK_DDR_AXI, "clk_ddr_axi", "clk_mux_axi6", |
| BM1880_CLK_ENABLE0, 4, CLK_IS_CRITICAL }, |
| { BM1880_CLK_APB_EFUSE, "clk_apb_efuse", "clk_mux_axi6", |
| BM1880_CLK_ENABLE0, 6, 0 }, |
| { BM1880_CLK_AXI5_EMMC, "clk_axi5_emmc", "clk_axi5", |
| BM1880_CLK_ENABLE0, 7, 0 }, |
| { BM1880_CLK_AXI5_SD, "clk_axi5_sd", "clk_axi5", |
| BM1880_CLK_ENABLE0, 10, 0 }, |
| { BM1880_CLK_AXI4_ETH0, "clk_axi4_eth0", "clk_axi4", |
| BM1880_CLK_ENABLE0, 14, 0 }, |
| { BM1880_CLK_AXI4_ETH1, "clk_axi4_eth1", "clk_axi4", |
| BM1880_CLK_ENABLE0, 16, 0 }, |
| { BM1880_CLK_AXI1_GDMA, "clk_axi1_gdma", "clk_axi1", |
| BM1880_CLK_ENABLE0, 17, 0 }, |
| /* Don't gate GPIO clocks as it is not owned by the GPIO driver */ |
| { BM1880_CLK_APB_GPIO, "clk_apb_gpio", "clk_mux_axi6", |
| BM1880_CLK_ENABLE0, 18, CLK_IGNORE_UNUSED }, |
| { BM1880_CLK_APB_GPIO_INTR, "clk_apb_gpio_intr", "clk_mux_axi6", |
| BM1880_CLK_ENABLE0, 19, CLK_IGNORE_UNUSED }, |
| { BM1880_CLK_AXI1_MINER, "clk_axi1_miner", "clk_axi1", |
| BM1880_CLK_ENABLE0, 21, 0 }, |
| { BM1880_CLK_AHB_SF, "clk_ahb_sf", "clk_mux_axi6", |
| BM1880_CLK_ENABLE0, 22, 0 }, |
| /* |
| * Not sure which module this clock is sourcing but gating this clock |
| * prevents the system from booting. So, let's mark it as critical. |
| */ |
| { BM1880_CLK_SDMA_AXI, "clk_sdma_axi", "clk_axi5", |
| BM1880_CLK_ENABLE0, 23, CLK_IS_CRITICAL }, |
| { BM1880_CLK_APB_I2C, "clk_apb_i2c", "clk_mux_axi6", |
| BM1880_CLK_ENABLE0, 25, 0 }, |
| { BM1880_CLK_APB_WDT, "clk_apb_wdt", "clk_mux_axi6", |
| BM1880_CLK_ENABLE0, 26, 0 }, |
| { BM1880_CLK_APB_JPEG, "clk_apb_jpeg", "clk_axi6", |
| BM1880_CLK_ENABLE0, 27, 0 }, |
| { BM1880_CLK_AXI5_NF, "clk_axi5_nf", "clk_axi5", |
| BM1880_CLK_ENABLE0, 29, 0 }, |
| { BM1880_CLK_APB_NF, "clk_apb_nf", "clk_axi6", |
| BM1880_CLK_ENABLE0, 30, 0 }, |
| { BM1880_CLK_APB_PWM, "clk_apb_pwm", "clk_mux_axi6", |
| BM1880_CLK_ENABLE1, 0, 0 }, |
| { BM1880_CLK_RV, "clk_rv", "clk_mux_rv", |
| BM1880_CLK_ENABLE1, 1, 0 }, |
| { BM1880_CLK_APB_SPI, "clk_apb_spi", "clk_mux_axi6", |
| BM1880_CLK_ENABLE1, 2, 0 }, |
| { BM1880_CLK_UART_500M, "clk_uart_500m", "clk_div_uart_500m", |
| BM1880_CLK_ENABLE1, 4, 0 }, |
| { BM1880_CLK_APB_UART, "clk_apb_uart", "clk_axi6", |
| BM1880_CLK_ENABLE1, 5, 0 }, |
| { BM1880_CLK_APB_I2S, "clk_apb_i2s", "clk_axi6", |
| BM1880_CLK_ENABLE1, 6, 0 }, |
| { BM1880_CLK_AXI4_USB, "clk_axi4_usb", "clk_axi4", |
| BM1880_CLK_ENABLE1, 7, 0 }, |
| { BM1880_CLK_APB_USB, "clk_apb_usb", "clk_axi6", |
| BM1880_CLK_ENABLE1, 8, 0 }, |
| { BM1880_CLK_12M_USB, "clk_12m_usb", "clk_div_12m_usb", |
| BM1880_CLK_ENABLE1, 11, 0 }, |
| { BM1880_CLK_APB_VIDEO, "clk_apb_video", "clk_axi6", |
| BM1880_CLK_ENABLE1, 12, 0 }, |
| { BM1880_CLK_APB_VPP, "clk_apb_vpp", "clk_axi6", |
| BM1880_CLK_ENABLE1, 15, 0 }, |
| { BM1880_CLK_AXI6, "clk_axi6", "clk_mux_axi6", |
| BM1880_CLK_ENABLE1, 21, 0 }, |
| }; |
| |
| static const char * const clk_a53_parents[] = { "clk_spll", "clk_mpll" }; |
| static const char * const clk_rv_parents[] = { "clk_div_1_rv", "clk_div_0_rv" }; |
| static const char * const clk_axi1_parents[] = { "clk_div_1_axi1", "clk_div_0_axi1" }; |
| static const char * const clk_axi6_parents[] = { "clk_div_1_axi6", "clk_div_0_axi6" }; |
| |
| static const struct bm1880_mux_clock bm1880_mux_clks[] = { |
| { BM1880_CLK_MUX_RV, "clk_mux_rv", clk_rv_parents, 2, |
| BM1880_CLK_SELECT, 1, 0 }, |
| { BM1880_CLK_MUX_AXI6, "clk_mux_axi6", clk_axi6_parents, 2, |
| BM1880_CLK_SELECT, 3, 0 }, |
| }; |
| |
| static const struct clk_div_table bm1880_div_table_0[] = { |
| { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 }, |
| { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 }, |
| { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 }, |
| { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 }, |
| { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 }, |
| { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 }, |
| { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 }, |
| { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 }, |
| { 0, 0 } |
| }; |
| |
| static const struct clk_div_table bm1880_div_table_1[] = { |
| { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 }, |
| { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 }, |
| { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 }, |
| { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 }, |
| { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 }, |
| { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 }, |
| { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 }, |
| { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 }, |
| { 127, 128 }, { 0, 0 } |
| }; |
| |
| static const struct clk_div_table bm1880_div_table_2[] = { |
| { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 }, |
| { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 }, |
| { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 }, |
| { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 }, |
| { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 }, |
| { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 }, |
| { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 }, |
| { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 }, |
| { 127, 128 }, { 255, 256 }, { 0, 0 } |
| }; |
| |
| static const struct clk_div_table bm1880_div_table_3[] = { |
| { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 }, |
| { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 }, |
| { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 }, |
| { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 }, |
| { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 }, |
| { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 }, |
| { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 }, |
| { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 }, |
| { 127, 128 }, { 255, 256 }, { 511, 512 }, { 0, 0 } |
| }; |
| |
| static const struct clk_div_table bm1880_div_table_4[] = { |
| { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 }, |
| { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 }, |
| { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 }, |
| { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 }, |
| { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 }, |
| { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 }, |
| { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 }, |
| { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 }, |
| { 127, 128 }, { 255, 256 }, { 511, 512 }, { 65535, 65536 }, |
| { 0, 0 } |
| }; |
| |
| /* |
| * Clocks marked as CRITICAL are needed for the proper functioning |
| * of the SoC. |
| */ |
| static struct bm1880_div_hw_clock bm1880_div_clks[] = { |
| CLK_DIV(BM1880_CLK_DIV_0_RV, "clk_div_0_rv", &bm1880_pll_clks[1].hw, |
| BM1880_CLK_DIV12, 16, 5, 1, bm1880_div_table_0, 0), |
| CLK_DIV(BM1880_CLK_DIV_1_RV, "clk_div_1_rv", &bm1880_pll_clks[2].hw, |
| BM1880_CLK_DIV13, 16, 5, 1, bm1880_div_table_0, 0), |
| CLK_DIV(BM1880_CLK_DIV_UART_500M, "clk_div_uart_500m", &bm1880_pll_clks[2].hw, |
| BM1880_CLK_DIV15, 16, 7, 3, bm1880_div_table_1, 0), |
| CLK_DIV(BM1880_CLK_DIV_0_AXI1, "clk_div_0_axi1", &bm1880_pll_clks[0].hw, |
| BM1880_CLK_DIV21, 16, 5, 2, bm1880_div_table_0, |
| 0), |
| CLK_DIV(BM1880_CLK_DIV_1_AXI1, "clk_div_1_axi1", &bm1880_pll_clks[2].hw, |
| BM1880_CLK_DIV22, 16, 5, 3, bm1880_div_table_0, |
| 0), |
| CLK_DIV(BM1880_CLK_DIV_0_AXI6, "clk_div_0_axi6", &bm1880_pll_clks[2].hw, |
| BM1880_CLK_DIV27, 16, 5, 15, bm1880_div_table_0, |
| 0), |
| CLK_DIV(BM1880_CLK_DIV_1_AXI6, "clk_div_1_axi6", &bm1880_pll_clks[0].hw, |
| BM1880_CLK_DIV28, 16, 5, 11, bm1880_div_table_0, |
| 0), |
| CLK_DIV(BM1880_CLK_DIV_12M_USB, "clk_div_12m_usb", &bm1880_pll_clks[2].hw, |
| BM1880_CLK_DIV18, 16, 7, 125, bm1880_div_table_1, 0), |
| }; |
| |
| /* |
| * Clocks marked as CRITICAL are all needed for the proper functioning |
| * of the SoC. |
| */ |
| static struct bm1880_composite_clock bm1880_composite_clks[] = { |
| /* |
| * Since clk_a53 and clk_50m_a53 clocks are sourcing the CPU core, |
| * let's mark them as critical to avoid gating. |
| */ |
| GATE_MUX(BM1880_CLK_A53, "clk_a53", clk_a53_parents, |
| BM1880_CLK_ENABLE0, 0, BM1880_CLK_SELECT, 0, |
| CLK_IS_CRITICAL), |
| GATE_DIV(BM1880_CLK_50M_A53, "clk_50m_a53", "clk_fpll", |
| BM1880_CLK_ENABLE0, 1, BM1880_CLK_DIV0, 16, 5, 30, |
| bm1880_div_table_0, CLK_IS_CRITICAL), |
| GATE_DIV(BM1880_CLK_EFUSE, "clk_efuse", "clk_fpll", |
| BM1880_CLK_ENABLE0, 5, BM1880_CLK_DIV1, 16, 7, 60, |
| bm1880_div_table_1, 0), |
| GATE_DIV(BM1880_CLK_EMMC, "clk_emmc", "clk_fpll", |
| BM1880_CLK_ENABLE0, 8, BM1880_CLK_DIV2, 16, 5, 15, |
| bm1880_div_table_0, 0), |
| GATE_DIV(BM1880_CLK_100K_EMMC, "clk_100k_emmc", "clk_div_12m_usb", |
| BM1880_CLK_ENABLE0, 9, BM1880_CLK_DIV3, 16, 8, 120, |
| bm1880_div_table_2, 0), |
| GATE_DIV(BM1880_CLK_SD, "clk_sd", "clk_fpll", |
| BM1880_CLK_ENABLE0, 11, BM1880_CLK_DIV4, 16, 5, 15, |
| bm1880_div_table_0, 0), |
| GATE_DIV(BM1880_CLK_100K_SD, "clk_100k_sd", "clk_div_12m_usb", |
| BM1880_CLK_ENABLE0, 12, BM1880_CLK_DIV5, 16, 8, 120, |
| bm1880_div_table_2, 0), |
| GATE_DIV(BM1880_CLK_500M_ETH0, "clk_500m_eth0", "clk_fpll", |
| BM1880_CLK_ENABLE0, 13, BM1880_CLK_DIV6, 16, 5, 3, |
| bm1880_div_table_0, 0), |
| GATE_DIV(BM1880_CLK_500M_ETH1, "clk_500m_eth1", "clk_fpll", |
| BM1880_CLK_ENABLE0, 15, BM1880_CLK_DIV7, 16, 5, 3, |
| bm1880_div_table_0, 0), |
| /* Don't gate GPIO clocks as it is not owned by the GPIO driver */ |
| GATE_DIV(BM1880_CLK_GPIO_DB, "clk_gpio_db", "clk_div_12m_usb", |
| BM1880_CLK_ENABLE0, 20, BM1880_CLK_DIV8, 16, 16, 120, |
| bm1880_div_table_4, CLK_IGNORE_UNUSED), |
| GATE_DIV(BM1880_CLK_SDMA_AUD, "clk_sdma_aud", "clk_fpll", |
| BM1880_CLK_ENABLE0, 24, BM1880_CLK_DIV9, 16, 7, 61, |
| bm1880_div_table_1, 0), |
| GATE_DIV(BM1880_CLK_JPEG_AXI, "clk_jpeg_axi", "clk_fpll", |
| BM1880_CLK_ENABLE0, 28, BM1880_CLK_DIV10, 16, 5, 4, |
| bm1880_div_table_0, 0), |
| GATE_DIV(BM1880_CLK_NF, "clk_nf", "clk_fpll", |
| BM1880_CLK_ENABLE0, 31, BM1880_CLK_DIV11, 16, 5, 30, |
| bm1880_div_table_0, 0), |
| GATE_DIV(BM1880_CLK_TPU_AXI, "clk_tpu_axi", "clk_spll", |
| BM1880_CLK_ENABLE1, 3, BM1880_CLK_DIV14, 16, 5, 1, |
| bm1880_div_table_0, 0), |
| GATE_DIV(BM1880_CLK_125M_USB, "clk_125m_usb", "clk_fpll", |
| BM1880_CLK_ENABLE1, 9, BM1880_CLK_DIV16, 16, 5, 12, |
| bm1880_div_table_0, 0), |
| GATE_DIV(BM1880_CLK_33K_USB, "clk_33k_usb", "clk_div_12m_usb", |
| BM1880_CLK_ENABLE1, 10, BM1880_CLK_DIV17, 16, 9, 363, |
| bm1880_div_table_3, 0), |
| GATE_DIV(BM1880_CLK_VIDEO_AXI, "clk_video_axi", "clk_fpll", |
| BM1880_CLK_ENABLE1, 13, BM1880_CLK_DIV19, 16, 5, 4, |
| bm1880_div_table_0, 0), |
| GATE_DIV(BM1880_CLK_VPP_AXI, "clk_vpp_axi", "clk_fpll", |
| BM1880_CLK_ENABLE1, 14, BM1880_CLK_DIV20, 16, 5, 4, |
| bm1880_div_table_0, 0), |
| GATE_MUX(BM1880_CLK_AXI1, "clk_axi1", clk_axi1_parents, |
| BM1880_CLK_ENABLE1, 15, BM1880_CLK_SELECT, 2, 0), |
| GATE_DIV(BM1880_CLK_AXI2, "clk_axi2", "clk_fpll", |
| BM1880_CLK_ENABLE1, 17, BM1880_CLK_DIV23, 16, 5, 3, |
| bm1880_div_table_0, 0), |
| GATE_DIV(BM1880_CLK_AXI3, "clk_axi3", "clk_mux_rv", |
| BM1880_CLK_ENABLE1, 18, BM1880_CLK_DIV24, 16, 5, 2, |
| bm1880_div_table_0, 0), |
| GATE_DIV(BM1880_CLK_AXI4, "clk_axi4", "clk_fpll", |
| BM1880_CLK_ENABLE1, 19, BM1880_CLK_DIV25, 16, 5, 6, |
| bm1880_div_table_0, 0), |
| GATE_DIV(BM1880_CLK_AXI5, "clk_axi5", "clk_fpll", |
| BM1880_CLK_ENABLE1, 20, BM1880_CLK_DIV26, 16, 5, 15, |
| bm1880_div_table_0, 0), |
| }; |
| |
| static unsigned long bm1880_pll_rate_calc(u32 regval, unsigned long parent_rate) |
| { |
| u64 numerator; |
| u32 fbdiv, refdiv; |
| u32 postdiv1, postdiv2, denominator; |
| |
| fbdiv = (regval >> 16) & 0xfff; |
| refdiv = regval & 0x1f; |
| postdiv1 = (regval >> 8) & 0x7; |
| postdiv2 = (regval >> 12) & 0x7; |
| |
| numerator = parent_rate * fbdiv; |
| denominator = refdiv * postdiv1 * postdiv2; |
| do_div(numerator, denominator); |
| |
| return (unsigned long)numerator; |
| } |
| |
| static unsigned long bm1880_pll_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct bm1880_pll_hw_clock *pll_hw = to_bm1880_pll_clk(hw); |
| unsigned long rate; |
| u32 regval; |
| |
| regval = readl(pll_hw->base + pll_hw->pll.reg); |
| rate = bm1880_pll_rate_calc(regval, parent_rate); |
| |
| return rate; |
| } |
| |
| static const struct clk_ops bm1880_pll_ops = { |
| .recalc_rate = bm1880_pll_recalc_rate, |
| }; |
| |
| static struct clk_hw *bm1880_clk_register_pll(struct bm1880_pll_hw_clock *pll_clk, |
| void __iomem *sys_base) |
| { |
| struct clk_hw *hw; |
| int err; |
| |
| pll_clk->base = sys_base; |
| hw = &pll_clk->hw; |
| |
| err = clk_hw_register(NULL, hw); |
| if (err) |
| return ERR_PTR(err); |
| |
| return hw; |
| } |
| |
| static int bm1880_clk_register_plls(struct bm1880_pll_hw_clock *clks, |
| int num_clks, |
| struct bm1880_clock_data *data) |
| { |
| struct clk_hw *hw; |
| void __iomem *pll_base = data->pll_base; |
| int i; |
| |
| for (i = 0; i < num_clks; i++) { |
| struct bm1880_pll_hw_clock *bm1880_clk = &clks[i]; |
| |
| hw = bm1880_clk_register_pll(bm1880_clk, pll_base); |
| if (IS_ERR(hw)) { |
| pr_err("%s: failed to register clock %s\n", |
| __func__, bm1880_clk->pll.name); |
| goto err_clk; |
| } |
| |
| data->hw_data.hws[clks[i].pll.id] = hw; |
| } |
| |
| return 0; |
| |
| err_clk: |
| while (i--) |
| clk_hw_unregister(data->hw_data.hws[clks[i].pll.id]); |
| |
| return PTR_ERR(hw); |
| } |
| |
| static int bm1880_clk_register_mux(const struct bm1880_mux_clock *clks, |
| int num_clks, |
| struct bm1880_clock_data *data) |
| { |
| struct clk_hw *hw; |
| void __iomem *sys_base = data->sys_base; |
| int i; |
| |
| for (i = 0; i < num_clks; i++) { |
| hw = clk_hw_register_mux(NULL, clks[i].name, |
| clks[i].parents, |
| clks[i].num_parents, |
| clks[i].flags, |
| sys_base + clks[i].reg, |
| clks[i].shift, 1, 0, |
| &bm1880_clk_lock); |
| if (IS_ERR(hw)) { |
| pr_err("%s: failed to register clock %s\n", |
| __func__, clks[i].name); |
| goto err_clk; |
| } |
| |
| data->hw_data.hws[clks[i].id] = hw; |
| } |
| |
| return 0; |
| |
| err_clk: |
| while (i--) |
| clk_hw_unregister_mux(data->hw_data.hws[clks[i].id]); |
| |
| return PTR_ERR(hw); |
| } |
| |
| static unsigned long bm1880_clk_div_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw); |
| struct bm1880_div_clock *div = &div_hw->div; |
| void __iomem *reg_addr = div_hw->base + div->reg; |
| unsigned int val; |
| unsigned long rate; |
| |
| if (!(readl(reg_addr) & BIT(3))) { |
| val = div->initval; |
| } else { |
| val = readl(reg_addr) >> div->shift; |
| val &= clk_div_mask(div->width); |
| } |
| |
| rate = divider_recalc_rate(hw, parent_rate, val, div->table, |
| div->flags, div->width); |
| |
| return rate; |
| } |
| |
| static long bm1880_clk_div_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate) |
| { |
| struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw); |
| struct bm1880_div_clock *div = &div_hw->div; |
| void __iomem *reg_addr = div_hw->base + div->reg; |
| |
| if (div->flags & CLK_DIVIDER_READ_ONLY) { |
| u32 val; |
| |
| val = readl(reg_addr) >> div->shift; |
| val &= clk_div_mask(div->width); |
| |
| return divider_ro_round_rate(hw, rate, prate, div->table, |
| div->width, div->flags, |
| val); |
| } |
| |
| return divider_round_rate(hw, rate, prate, div->table, |
| div->width, div->flags); |
| } |
| |
| static int bm1880_clk_div_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw); |
| struct bm1880_div_clock *div = &div_hw->div; |
| void __iomem *reg_addr = div_hw->base + div->reg; |
| unsigned long flags = 0; |
| int value; |
| u32 val; |
| |
| value = divider_get_val(rate, parent_rate, div->table, |
| div->width, div_hw->div.flags); |
| if (value < 0) |
| return value; |
| |
| if (div_hw->lock) |
| spin_lock_irqsave(div_hw->lock, flags); |
| else |
| __acquire(div_hw->lock); |
| |
| val = readl(reg_addr); |
| val &= ~(clk_div_mask(div->width) << div_hw->div.shift); |
| val |= (u32)value << div->shift; |
| writel(val, reg_addr); |
| |
| if (div_hw->lock) |
| spin_unlock_irqrestore(div_hw->lock, flags); |
| else |
| __release(div_hw->lock); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops bm1880_clk_div_ops = { |
| .recalc_rate = bm1880_clk_div_recalc_rate, |
| .round_rate = bm1880_clk_div_round_rate, |
| .set_rate = bm1880_clk_div_set_rate, |
| }; |
| |
| static struct clk_hw *bm1880_clk_register_div(struct bm1880_div_hw_clock *div_clk, |
| void __iomem *sys_base) |
| { |
| struct clk_hw *hw; |
| int err; |
| |
| div_clk->div.flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO; |
| div_clk->base = sys_base; |
| div_clk->lock = &bm1880_clk_lock; |
| |
| hw = &div_clk->hw; |
| err = clk_hw_register(NULL, hw); |
| if (err) |
| return ERR_PTR(err); |
| |
| return hw; |
| } |
| |
| static int bm1880_clk_register_divs(struct bm1880_div_hw_clock *clks, |
| int num_clks, |
| struct bm1880_clock_data *data) |
| { |
| struct clk_hw *hw; |
| void __iomem *sys_base = data->sys_base; |
| unsigned int i, id; |
| |
| for (i = 0; i < num_clks; i++) { |
| struct bm1880_div_hw_clock *bm1880_clk = &clks[i]; |
| |
| hw = bm1880_clk_register_div(bm1880_clk, sys_base); |
| if (IS_ERR(hw)) { |
| pr_err("%s: failed to register clock %s\n", |
| __func__, bm1880_clk->div.name); |
| goto err_clk; |
| } |
| |
| id = clks[i].div.id; |
| data->hw_data.hws[id] = hw; |
| } |
| |
| return 0; |
| |
| err_clk: |
| while (i--) |
| clk_hw_unregister(data->hw_data.hws[clks[i].div.id]); |
| |
| return PTR_ERR(hw); |
| } |
| |
| static int bm1880_clk_register_gate(const struct bm1880_gate_clock *clks, |
| int num_clks, |
| struct bm1880_clock_data *data) |
| { |
| struct clk_hw *hw; |
| void __iomem *sys_base = data->sys_base; |
| int i; |
| |
| for (i = 0; i < num_clks; i++) { |
| hw = clk_hw_register_gate(NULL, clks[i].name, |
| clks[i].parent, |
| clks[i].flags, |
| sys_base + clks[i].gate_reg, |
| clks[i].gate_shift, 0, |
| &bm1880_clk_lock); |
| if (IS_ERR(hw)) { |
| pr_err("%s: failed to register clock %s\n", |
| __func__, clks[i].name); |
| goto err_clk; |
| } |
| |
| data->hw_data.hws[clks[i].id] = hw; |
| } |
| |
| return 0; |
| |
| err_clk: |
| while (i--) |
| clk_hw_unregister_gate(data->hw_data.hws[clks[i].id]); |
| |
| return PTR_ERR(hw); |
| } |
| |
| static struct clk_hw *bm1880_clk_register_composite(struct bm1880_composite_clock *clks, |
| void __iomem *sys_base) |
| { |
| struct clk_hw *hw; |
| struct clk_mux *mux = NULL; |
| struct clk_gate *gate = NULL; |
| struct bm1880_div_hw_clock *div_hws = NULL; |
| struct clk_hw *mux_hw = NULL, *gate_hw = NULL, *div_hw = NULL; |
| const struct clk_ops *mux_ops = NULL, *gate_ops = NULL, *div_ops = NULL; |
| const char * const *parent_names; |
| const char *parent; |
| int num_parents; |
| int ret; |
| |
| if (clks->mux_shift >= 0) { |
| mux = kzalloc(sizeof(*mux), GFP_KERNEL); |
| if (!mux) |
| return ERR_PTR(-ENOMEM); |
| |
| mux->reg = sys_base + clks->mux_reg; |
| mux->mask = 1; |
| mux->shift = clks->mux_shift; |
| mux_hw = &mux->hw; |
| mux_ops = &clk_mux_ops; |
| mux->lock = &bm1880_clk_lock; |
| |
| parent_names = clks->parents; |
| num_parents = clks->num_parents; |
| } else { |
| parent = clks->parent; |
| parent_names = &parent; |
| num_parents = 1; |
| } |
| |
| if (clks->gate_shift >= 0) { |
| gate = kzalloc(sizeof(*gate), GFP_KERNEL); |
| if (!gate) { |
| ret = -ENOMEM; |
| goto err_out; |
| } |
| |
| gate->reg = sys_base + clks->gate_reg; |
| gate->bit_idx = clks->gate_shift; |
| gate->lock = &bm1880_clk_lock; |
| |
| gate_hw = &gate->hw; |
| gate_ops = &clk_gate_ops; |
| } |
| |
| if (clks->div_shift >= 0) { |
| div_hws = kzalloc(sizeof(*div_hws), GFP_KERNEL); |
| if (!div_hws) { |
| ret = -ENOMEM; |
| goto err_out; |
| } |
| |
| div_hws->base = sys_base; |
| div_hws->div.reg = clks->div_reg; |
| div_hws->div.shift = clks->div_shift; |
| div_hws->div.width = clks->div_width; |
| div_hws->div.table = clks->table; |
| div_hws->div.initval = clks->div_initval; |
| div_hws->lock = &bm1880_clk_lock; |
| div_hws->div.flags = CLK_DIVIDER_ONE_BASED | |
| CLK_DIVIDER_ALLOW_ZERO; |
| |
| div_hw = &div_hws->hw; |
| div_ops = &bm1880_clk_div_ops; |
| } |
| |
| hw = clk_hw_register_composite(NULL, clks->name, parent_names, |
| num_parents, mux_hw, mux_ops, div_hw, |
| div_ops, gate_hw, gate_ops, |
| clks->flags); |
| |
| if (IS_ERR(hw)) { |
| ret = PTR_ERR(hw); |
| goto err_out; |
| } |
| |
| return hw; |
| |
| err_out: |
| kfree(div_hws); |
| kfree(gate); |
| kfree(mux); |
| |
| return ERR_PTR(ret); |
| } |
| |
| static int bm1880_clk_register_composites(struct bm1880_composite_clock *clks, |
| int num_clks, |
| struct bm1880_clock_data *data) |
| { |
| struct clk_hw *hw; |
| void __iomem *sys_base = data->sys_base; |
| int i; |
| |
| for (i = 0; i < num_clks; i++) { |
| struct bm1880_composite_clock *bm1880_clk = &clks[i]; |
| |
| hw = bm1880_clk_register_composite(bm1880_clk, sys_base); |
| if (IS_ERR(hw)) { |
| pr_err("%s: failed to register clock %s\n", |
| __func__, bm1880_clk->name); |
| goto err_clk; |
| } |
| |
| data->hw_data.hws[clks[i].id] = hw; |
| } |
| |
| return 0; |
| |
| err_clk: |
| while (i--) |
| clk_hw_unregister_composite(data->hw_data.hws[clks[i].id]); |
| |
| return PTR_ERR(hw); |
| } |
| |
| static int bm1880_clk_probe(struct platform_device *pdev) |
| { |
| struct bm1880_clock_data *clk_data; |
| void __iomem *pll_base, *sys_base; |
| struct device *dev = &pdev->dev; |
| int num_clks, i; |
| |
| pll_base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(pll_base)) |
| return PTR_ERR(pll_base); |
| |
| sys_base = devm_platform_ioremap_resource(pdev, 1); |
| if (IS_ERR(sys_base)) |
| return PTR_ERR(sys_base); |
| |
| num_clks = ARRAY_SIZE(bm1880_pll_clks) + |
| ARRAY_SIZE(bm1880_div_clks) + |
| ARRAY_SIZE(bm1880_mux_clks) + |
| ARRAY_SIZE(bm1880_composite_clks) + |
| ARRAY_SIZE(bm1880_gate_clks); |
| |
| clk_data = devm_kzalloc(dev, struct_size(clk_data, hw_data.hws, |
| num_clks), GFP_KERNEL); |
| if (!clk_data) |
| return -ENOMEM; |
| |
| clk_data->pll_base = pll_base; |
| clk_data->sys_base = sys_base; |
| |
| for (i = 0; i < num_clks; i++) |
| clk_data->hw_data.hws[i] = ERR_PTR(-ENOENT); |
| |
| clk_data->hw_data.num = num_clks; |
| |
| bm1880_clk_register_plls(bm1880_pll_clks, |
| ARRAY_SIZE(bm1880_pll_clks), |
| clk_data); |
| |
| bm1880_clk_register_divs(bm1880_div_clks, |
| ARRAY_SIZE(bm1880_div_clks), |
| clk_data); |
| |
| bm1880_clk_register_mux(bm1880_mux_clks, |
| ARRAY_SIZE(bm1880_mux_clks), |
| clk_data); |
| |
| bm1880_clk_register_composites(bm1880_composite_clks, |
| ARRAY_SIZE(bm1880_composite_clks), |
| clk_data); |
| |
| bm1880_clk_register_gate(bm1880_gate_clks, |
| ARRAY_SIZE(bm1880_gate_clks), |
| clk_data); |
| |
| return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, |
| &clk_data->hw_data); |
| } |
| |
| static const struct of_device_id bm1880_of_match[] = { |
| { .compatible = "bitmain,bm1880-clk", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, bm1880_of_match); |
| |
| static struct platform_driver bm1880_clk_driver = { |
| .driver = { |
| .name = "bm1880-clk", |
| .of_match_table = bm1880_of_match, |
| }, |
| .probe = bm1880_clk_probe, |
| }; |
| module_platform_driver(bm1880_clk_driver); |
| |
| MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>"); |
| MODULE_DESCRIPTION("Clock driver for Bitmain BM1880 SoC"); |