| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * RTC driver for the interal RTC block in the Amlogic Meson6, Meson8, |
| * Meson8b and Meson8m2 SoCs. |
| * |
| * The RTC is split in to two parts, the AHB front end and a simple serial |
| * connection to the actual registers. This driver manages both parts. |
| * |
| * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
| * Copyright (c) 2015 Ben Dooks <ben.dooks@codethink.co.uk> for Codethink Ltd |
| * Based on origin by Carlo Caione <carlo@endlessm.com> |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/nvmem-provider.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/reset.h> |
| #include <linux/rtc.h> |
| |
| /* registers accessed from cpu bus */ |
| #define RTC_ADDR0 0x00 |
| #define RTC_ADDR0_LINE_SCLK BIT(0) |
| #define RTC_ADDR0_LINE_SEN BIT(1) |
| #define RTC_ADDR0_LINE_SDI BIT(2) |
| #define RTC_ADDR0_START_SER BIT(17) |
| #define RTC_ADDR0_WAIT_SER BIT(22) |
| #define RTC_ADDR0_DATA GENMASK(31, 24) |
| |
| #define RTC_ADDR1 0x04 |
| #define RTC_ADDR1_SDO BIT(0) |
| #define RTC_ADDR1_S_READY BIT(1) |
| |
| #define RTC_ADDR2 0x08 |
| #define RTC_ADDR3 0x0c |
| |
| #define RTC_REG4 0x10 |
| #define RTC_REG4_STATIC_VALUE GENMASK(7, 0) |
| |
| /* rtc registers accessed via rtc-serial interface */ |
| #define RTC_COUNTER (0) |
| #define RTC_SEC_ADJ (2) |
| #define RTC_REGMEM_0 (4) |
| #define RTC_REGMEM_1 (5) |
| #define RTC_REGMEM_2 (6) |
| #define RTC_REGMEM_3 (7) |
| |
| #define RTC_ADDR_BITS (3) /* number of address bits to send */ |
| #define RTC_DATA_BITS (32) /* number of data bits to tx/rx */ |
| |
| #define MESON_STATIC_BIAS_CUR (0x5 << 1) |
| #define MESON_STATIC_VOLTAGE (0x3 << 11) |
| #define MESON_STATIC_DEFAULT (MESON_STATIC_BIAS_CUR | MESON_STATIC_VOLTAGE) |
| |
| struct meson_rtc { |
| struct rtc_device *rtc; /* rtc device we created */ |
| struct device *dev; /* device we bound from */ |
| struct reset_control *reset; /* reset source */ |
| struct regulator *vdd; /* voltage input */ |
| struct regmap *peripheral; /* peripheral registers */ |
| struct regmap *serial; /* serial registers */ |
| }; |
| |
| static const struct regmap_config meson_rtc_peripheral_regmap_config = { |
| .name = "peripheral-registers", |
| .reg_bits = 8, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = RTC_REG4, |
| .fast_io = true, |
| }; |
| |
| /* RTC front-end serialiser controls */ |
| |
| static void meson_rtc_sclk_pulse(struct meson_rtc *rtc) |
| { |
| udelay(5); |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SCLK, 0); |
| udelay(5); |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SCLK, |
| RTC_ADDR0_LINE_SCLK); |
| } |
| |
| static void meson_rtc_send_bit(struct meson_rtc *rtc, unsigned int bit) |
| { |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, |
| bit ? RTC_ADDR0_LINE_SDI : 0); |
| meson_rtc_sclk_pulse(rtc); |
| } |
| |
| static void meson_rtc_send_bits(struct meson_rtc *rtc, u32 data, |
| unsigned int nr) |
| { |
| u32 bit = 1 << (nr - 1); |
| |
| while (bit) { |
| meson_rtc_send_bit(rtc, data & bit); |
| bit >>= 1; |
| } |
| } |
| |
| static void meson_rtc_set_dir(struct meson_rtc *rtc, u32 mode) |
| { |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN, 0); |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, 0); |
| meson_rtc_send_bit(rtc, mode); |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, 0); |
| } |
| |
| static u32 meson_rtc_get_data(struct meson_rtc *rtc) |
| { |
| u32 tmp, val = 0; |
| int bit; |
| |
| for (bit = 0; bit < RTC_DATA_BITS; bit++) { |
| meson_rtc_sclk_pulse(rtc); |
| val <<= 1; |
| |
| regmap_read(rtc->peripheral, RTC_ADDR1, &tmp); |
| val |= tmp & RTC_ADDR1_SDO; |
| } |
| |
| return val; |
| } |
| |
| static int meson_rtc_get_bus(struct meson_rtc *rtc) |
| { |
| int ret, retries; |
| u32 val; |
| |
| /* prepare bus for transfers, set all lines low */ |
| val = RTC_ADDR0_LINE_SDI | RTC_ADDR0_LINE_SEN | RTC_ADDR0_LINE_SCLK; |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, val, 0); |
| |
| for (retries = 0; retries < 3; retries++) { |
| /* wait for the bus to be ready */ |
| if (!regmap_read_poll_timeout(rtc->peripheral, RTC_ADDR1, val, |
| val & RTC_ADDR1_S_READY, 10, |
| 10000)) |
| return 0; |
| |
| dev_warn(rtc->dev, "failed to get bus, resetting RTC\n"); |
| |
| ret = reset_control_reset(rtc->reset); |
| if (ret) |
| return ret; |
| } |
| |
| dev_err(rtc->dev, "bus is not ready\n"); |
| return -ETIMEDOUT; |
| } |
| |
| static int meson_rtc_serial_bus_reg_read(void *context, unsigned int reg, |
| unsigned int *data) |
| { |
| struct meson_rtc *rtc = context; |
| int ret; |
| |
| ret = meson_rtc_get_bus(rtc); |
| if (ret) |
| return ret; |
| |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN, |
| RTC_ADDR0_LINE_SEN); |
| meson_rtc_send_bits(rtc, reg, RTC_ADDR_BITS); |
| meson_rtc_set_dir(rtc, 0); |
| *data = meson_rtc_get_data(rtc); |
| |
| return 0; |
| } |
| |
| static int meson_rtc_serial_bus_reg_write(void *context, unsigned int reg, |
| unsigned int data) |
| { |
| struct meson_rtc *rtc = context; |
| int ret; |
| |
| ret = meson_rtc_get_bus(rtc); |
| if (ret) |
| return ret; |
| |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN, |
| RTC_ADDR0_LINE_SEN); |
| meson_rtc_send_bits(rtc, data, RTC_DATA_BITS); |
| meson_rtc_send_bits(rtc, reg, RTC_ADDR_BITS); |
| meson_rtc_set_dir(rtc, 1); |
| |
| return 0; |
| } |
| |
| static const struct regmap_bus meson_rtc_serial_bus = { |
| .reg_read = meson_rtc_serial_bus_reg_read, |
| .reg_write = meson_rtc_serial_bus_reg_write, |
| }; |
| |
| static const struct regmap_config meson_rtc_serial_regmap_config = { |
| .name = "serial-registers", |
| .reg_bits = 4, |
| .reg_stride = 1, |
| .val_bits = 32, |
| .max_register = RTC_REGMEM_3, |
| .fast_io = false, |
| }; |
| |
| static int meson_rtc_write_static(struct meson_rtc *rtc, u32 data) |
| { |
| u32 tmp; |
| |
| regmap_write(rtc->peripheral, RTC_REG4, |
| FIELD_PREP(RTC_REG4_STATIC_VALUE, (data >> 8))); |
| |
| /* write the static value and start the auto serializer */ |
| tmp = FIELD_PREP(RTC_ADDR0_DATA, (data & 0xff)) | RTC_ADDR0_START_SER; |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, |
| RTC_ADDR0_DATA | RTC_ADDR0_START_SER, tmp); |
| |
| /* wait for the auto serializer to complete */ |
| return regmap_read_poll_timeout(rtc->peripheral, RTC_REG4, tmp, |
| !(tmp & RTC_ADDR0_WAIT_SER), 10, |
| 10000); |
| } |
| |
| /* RTC interface layer functions */ |
| |
| static int meson_rtc_gettime(struct device *dev, struct rtc_time *tm) |
| { |
| struct meson_rtc *rtc = dev_get_drvdata(dev); |
| u32 time; |
| int ret; |
| |
| ret = regmap_read(rtc->serial, RTC_COUNTER, &time); |
| if (!ret) |
| rtc_time64_to_tm(time, tm); |
| |
| return ret; |
| } |
| |
| static int meson_rtc_settime(struct device *dev, struct rtc_time *tm) |
| { |
| struct meson_rtc *rtc = dev_get_drvdata(dev); |
| |
| return regmap_write(rtc->serial, RTC_COUNTER, rtc_tm_to_time64(tm)); |
| } |
| |
| static const struct rtc_class_ops meson_rtc_ops = { |
| .read_time = meson_rtc_gettime, |
| .set_time = meson_rtc_settime, |
| }; |
| |
| /* NVMEM interface layer functions */ |
| |
| static int meson_rtc_regmem_read(void *context, unsigned int offset, |
| void *buf, size_t bytes) |
| { |
| struct meson_rtc *rtc = context; |
| unsigned int read_offset, read_size; |
| |
| read_offset = RTC_REGMEM_0 + (offset / 4); |
| read_size = bytes / 4; |
| |
| return regmap_bulk_read(rtc->serial, read_offset, buf, read_size); |
| } |
| |
| static int meson_rtc_regmem_write(void *context, unsigned int offset, |
| void *buf, size_t bytes) |
| { |
| struct meson_rtc *rtc = context; |
| unsigned int write_offset, write_size; |
| |
| write_offset = RTC_REGMEM_0 + (offset / 4); |
| write_size = bytes / 4; |
| |
| return regmap_bulk_write(rtc->serial, write_offset, buf, write_size); |
| } |
| |
| static int meson_rtc_probe(struct platform_device *pdev) |
| { |
| struct nvmem_config meson_rtc_nvmem_config = { |
| .name = "meson-rtc-regmem", |
| .type = NVMEM_TYPE_BATTERY_BACKED, |
| .word_size = 4, |
| .stride = 4, |
| .size = 4 * 4, |
| .reg_read = meson_rtc_regmem_read, |
| .reg_write = meson_rtc_regmem_write, |
| }; |
| struct device *dev = &pdev->dev; |
| struct meson_rtc *rtc; |
| void __iomem *base; |
| int ret; |
| u32 tm; |
| |
| rtc = devm_kzalloc(dev, sizeof(struct meson_rtc), GFP_KERNEL); |
| if (!rtc) |
| return -ENOMEM; |
| |
| rtc->rtc = devm_rtc_allocate_device(dev); |
| if (IS_ERR(rtc->rtc)) |
| return PTR_ERR(rtc->rtc); |
| |
| platform_set_drvdata(pdev, rtc); |
| |
| rtc->dev = dev; |
| |
| rtc->rtc->ops = &meson_rtc_ops; |
| rtc->rtc->range_max = U32_MAX; |
| |
| base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| rtc->peripheral = devm_regmap_init_mmio(dev, base, |
| &meson_rtc_peripheral_regmap_config); |
| if (IS_ERR(rtc->peripheral)) { |
| dev_err(dev, "failed to create peripheral regmap\n"); |
| return PTR_ERR(rtc->peripheral); |
| } |
| |
| rtc->reset = devm_reset_control_get(dev, NULL); |
| if (IS_ERR(rtc->reset)) { |
| dev_err(dev, "missing reset line\n"); |
| return PTR_ERR(rtc->reset); |
| } |
| |
| rtc->vdd = devm_regulator_get(dev, "vdd"); |
| if (IS_ERR(rtc->vdd)) { |
| dev_err(dev, "failed to get the vdd-supply\n"); |
| return PTR_ERR(rtc->vdd); |
| } |
| |
| ret = regulator_enable(rtc->vdd); |
| if (ret) { |
| dev_err(dev, "failed to enable vdd-supply\n"); |
| return ret; |
| } |
| |
| ret = meson_rtc_write_static(rtc, MESON_STATIC_DEFAULT); |
| if (ret) { |
| dev_err(dev, "failed to set static values\n"); |
| goto out_disable_vdd; |
| } |
| |
| rtc->serial = devm_regmap_init(dev, &meson_rtc_serial_bus, rtc, |
| &meson_rtc_serial_regmap_config); |
| if (IS_ERR(rtc->serial)) { |
| dev_err(dev, "failed to create serial regmap\n"); |
| ret = PTR_ERR(rtc->serial); |
| goto out_disable_vdd; |
| } |
| |
| /* |
| * check if we can read RTC counter, if not then the RTC is probably |
| * not functional. If it isn't probably best to not bind. |
| */ |
| ret = regmap_read(rtc->serial, RTC_COUNTER, &tm); |
| if (ret) { |
| dev_err(dev, "cannot read RTC counter, RTC not functional\n"); |
| goto out_disable_vdd; |
| } |
| |
| meson_rtc_nvmem_config.priv = rtc; |
| ret = devm_rtc_nvmem_register(rtc->rtc, &meson_rtc_nvmem_config); |
| if (ret) |
| goto out_disable_vdd; |
| |
| ret = devm_rtc_register_device(rtc->rtc); |
| if (ret) |
| goto out_disable_vdd; |
| |
| return 0; |
| |
| out_disable_vdd: |
| regulator_disable(rtc->vdd); |
| return ret; |
| } |
| |
| static const __maybe_unused struct of_device_id meson_rtc_dt_match[] = { |
| { .compatible = "amlogic,meson6-rtc", }, |
| { .compatible = "amlogic,meson8-rtc", }, |
| { .compatible = "amlogic,meson8b-rtc", }, |
| { .compatible = "amlogic,meson8m2-rtc", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, meson_rtc_dt_match); |
| |
| static struct platform_driver meson_rtc_driver = { |
| .probe = meson_rtc_probe, |
| .driver = { |
| .name = "meson-rtc", |
| .of_match_table = of_match_ptr(meson_rtc_dt_match), |
| }, |
| }; |
| module_platform_driver(meson_rtc_driver); |
| |
| MODULE_DESCRIPTION("Amlogic Meson RTC Driver"); |
| MODULE_AUTHOR("Ben Dooks <ben.dooks@codethink.co.uk>"); |
| MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:meson-rtc"); |