blob: de16da9070a51e82a50393012bd97b6917c03aaf [file] [log] [blame]
/*
This file is provided under a dual BSD/GPLv2 license. When using or
redistributing this file, you may do so under either license.
GPL LICENSE SUMMARY
Copyright(c) 2014 Intel Corporation.
This program is free software; you can redistribute it and/or modify
it under the terms of version 2 of the GNU General Public License as
published by the Free Software Foundation.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
Contact Information:
qat-linux@intel.com
BSD LICENSE
Copyright(c) 2014 Intel Corporation.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
* Neither the name of Intel Corporation nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/seq_file.h>
#include "adf_accel_devices.h"
#include "adf_cfg.h"
#include "adf_common_drv.h"
static DEFINE_MUTEX(qat_cfg_read_lock);
static void *qat_dev_cfg_start(struct seq_file *sfile, loff_t *pos)
{
struct adf_cfg_device_data *dev_cfg = sfile->private;
mutex_lock(&qat_cfg_read_lock);
return seq_list_start(&dev_cfg->sec_list, *pos);
}
static int qat_dev_cfg_show(struct seq_file *sfile, void *v)
{
struct list_head *list;
struct adf_cfg_section *sec =
list_entry(v, struct adf_cfg_section, list);
seq_printf(sfile, "[%s]\n", sec->name);
list_for_each(list, &sec->param_head) {
struct adf_cfg_key_val *ptr =
list_entry(list, struct adf_cfg_key_val, list);
seq_printf(sfile, "%s = %s\n", ptr->key, ptr->val);
}
return 0;
}
static void *qat_dev_cfg_next(struct seq_file *sfile, void *v, loff_t *pos)
{
struct adf_cfg_device_data *dev_cfg = sfile->private;
return seq_list_next(v, &dev_cfg->sec_list, pos);
}
static void qat_dev_cfg_stop(struct seq_file *sfile, void *v)
{
mutex_unlock(&qat_cfg_read_lock);
}
static const struct seq_operations qat_dev_cfg_sops = {
.start = qat_dev_cfg_start,
.next = qat_dev_cfg_next,
.stop = qat_dev_cfg_stop,
.show = qat_dev_cfg_show
};
static int qat_dev_cfg_open(struct inode *inode, struct file *file)
{
int ret = seq_open(file, &qat_dev_cfg_sops);
if (!ret) {
struct seq_file *seq_f = file->private_data;
seq_f->private = inode->i_private;
}
return ret;
}
static const struct file_operations qat_dev_cfg_fops = {
.open = qat_dev_cfg_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release
};
/**
* adf_cfg_dev_add() - Create an acceleration device configuration table.
* @accel_dev: Pointer to acceleration device.
*
* Function creates a configuration table for the given acceleration device.
* The table stores device specific config values.
* To be used by QAT device specific drivers.
*
* Return: 0 on success, error code othewise.
*/
int adf_cfg_dev_add(struct adf_accel_dev *accel_dev)
{
struct adf_cfg_device_data *dev_cfg_data;
dev_cfg_data = kzalloc(sizeof(*dev_cfg_data), GFP_KERNEL);
if (!dev_cfg_data)
return -ENOMEM;
INIT_LIST_HEAD(&dev_cfg_data->sec_list);
init_rwsem(&dev_cfg_data->lock);
accel_dev->cfg = dev_cfg_data;
/* accel_dev->debugfs_dir should always be non-NULL here */
dev_cfg_data->debug = debugfs_create_file("dev_cfg", S_IRUSR,
accel_dev->debugfs_dir,
dev_cfg_data,
&qat_dev_cfg_fops);
if (!dev_cfg_data->debug) {
pr_err("QAT: Failed to create qat cfg debugfs entry.\n");
kfree(dev_cfg_data);
accel_dev->cfg = NULL;
return -EFAULT;
}
return 0;
}
EXPORT_SYMBOL_GPL(adf_cfg_dev_add);
static void adf_cfg_section_del_all(struct list_head *head);
void adf_cfg_del_all(struct adf_accel_dev *accel_dev)
{
struct adf_cfg_device_data *dev_cfg_data = accel_dev->cfg;
down_write(&dev_cfg_data->lock);
adf_cfg_section_del_all(&dev_cfg_data->sec_list);
up_write(&dev_cfg_data->lock);
clear_bit(ADF_STATUS_CONFIGURED, &accel_dev->status);
}
/**
* adf_cfg_dev_remove() - Clears acceleration device configuration table.
* @accel_dev: Pointer to acceleration device.
*
* Function removes configuration table from the given acceleration device
* and frees all allocated memory.
* To be used by QAT device specific drivers.
*
* Return: void
*/
void adf_cfg_dev_remove(struct adf_accel_dev *accel_dev)
{
struct adf_cfg_device_data *dev_cfg_data = accel_dev->cfg;
down_write(&dev_cfg_data->lock);
adf_cfg_section_del_all(&dev_cfg_data->sec_list);
up_write(&dev_cfg_data->lock);
debugfs_remove(dev_cfg_data->debug);
kfree(dev_cfg_data);
accel_dev->cfg = NULL;
}
EXPORT_SYMBOL_GPL(adf_cfg_dev_remove);
static void adf_cfg_keyval_add(struct adf_cfg_key_val *new,
struct adf_cfg_section *sec)
{
list_add_tail(&new->list, &sec->param_head);
}
static void adf_cfg_keyval_del_all(struct list_head *head)
{
struct list_head *list_ptr, *tmp;
list_for_each_prev_safe(list_ptr, tmp, head) {
struct adf_cfg_key_val *ptr =
list_entry(list_ptr, struct adf_cfg_key_val, list);
list_del(list_ptr);
kfree(ptr);
}
}
static void adf_cfg_section_del_all(struct list_head *head)
{
struct adf_cfg_section *ptr;
struct list_head *list, *tmp;
list_for_each_prev_safe(list, tmp, head) {
ptr = list_entry(list, struct adf_cfg_section, list);
adf_cfg_keyval_del_all(&ptr->param_head);
list_del(list);
kfree(ptr);
}
}
static struct adf_cfg_key_val *adf_cfg_key_value_find(struct adf_cfg_section *s,
const char *key)
{
struct list_head *list;
list_for_each(list, &s->param_head) {
struct adf_cfg_key_val *ptr =
list_entry(list, struct adf_cfg_key_val, list);
if (!strcmp(ptr->key, key))
return ptr;
}
return NULL;
}
static struct adf_cfg_section *adf_cfg_sec_find(struct adf_accel_dev *accel_dev,
const char *sec_name)
{
struct adf_cfg_device_data *cfg = accel_dev->cfg;
struct list_head *list;
list_for_each(list, &cfg->sec_list) {
struct adf_cfg_section *ptr =
list_entry(list, struct adf_cfg_section, list);
if (!strcmp(ptr->name, sec_name))
return ptr;
}
return NULL;
}
static int adf_cfg_key_val_get(struct adf_accel_dev *accel_dev,
const char *sec_name,
const char *key_name,
char *val)
{
struct adf_cfg_section *sec = adf_cfg_sec_find(accel_dev, sec_name);
struct adf_cfg_key_val *keyval = NULL;
if (sec)
keyval = adf_cfg_key_value_find(sec, key_name);
if (keyval) {
memcpy(val, keyval->val, ADF_CFG_MAX_VAL_LEN_IN_BYTES);
return 0;
}
return -1;
}
/**
* adf_cfg_add_key_value_param() - Add key-value config entry to config table.
* @accel_dev: Pointer to acceleration device.
* @section_name: Name of the section where the param will be added
* @key: The key string
* @val: Value pain for the given @key
* @type: Type - string, int or address
*
* Function adds configuration key - value entry in the appropriate section
* in the given acceleration device
* To be used by QAT device specific drivers.
*
* Return: 0 on success, error code othewise.
*/
int adf_cfg_add_key_value_param(struct adf_accel_dev *accel_dev,
const char *section_name,
const char *key, const void *val,
enum adf_cfg_val_type type)
{
struct adf_cfg_device_data *cfg = accel_dev->cfg;
struct adf_cfg_key_val *key_val;
struct adf_cfg_section *section = adf_cfg_sec_find(accel_dev,
section_name);
if (!section)
return -EFAULT;
key_val = kzalloc(sizeof(*key_val), GFP_KERNEL);
if (!key_val)
return -ENOMEM;
INIT_LIST_HEAD(&key_val->list);
strlcpy(key_val->key, key, sizeof(key_val->key));
if (type == ADF_DEC) {
snprintf(key_val->val, ADF_CFG_MAX_VAL_LEN_IN_BYTES,
"%ld", (*((long *)val)));
} else if (type == ADF_STR) {
strlcpy(key_val->val, (char *)val, sizeof(key_val->val));
} else if (type == ADF_HEX) {
snprintf(key_val->val, ADF_CFG_MAX_VAL_LEN_IN_BYTES,
"0x%lx", (unsigned long)val);
} else {
pr_err("QAT: Unknown type given.\n");
kfree(key_val);
return -1;
}
key_val->type = type;
down_write(&cfg->lock);
adf_cfg_keyval_add(key_val, section);
up_write(&cfg->lock);
return 0;
}
EXPORT_SYMBOL_GPL(adf_cfg_add_key_value_param);
/**
* adf_cfg_section_add() - Add config section entry to config table.
* @accel_dev: Pointer to acceleration device.
* @name: Name of the section
*
* Function adds configuration section where key - value entries
* will be stored.
* To be used by QAT device specific drivers.
*
* Return: 0 on success, error code othewise.
*/
int adf_cfg_section_add(struct adf_accel_dev *accel_dev, const char *name)
{
struct adf_cfg_device_data *cfg = accel_dev->cfg;
struct adf_cfg_section *sec = adf_cfg_sec_find(accel_dev, name);
if (sec)
return 0;
sec = kzalloc(sizeof(*sec), GFP_KERNEL);
if (!sec)
return -ENOMEM;
strlcpy(sec->name, name, sizeof(sec->name));
INIT_LIST_HEAD(&sec->param_head);
down_write(&cfg->lock);
list_add_tail(&sec->list, &cfg->sec_list);
up_write(&cfg->lock);
return 0;
}
EXPORT_SYMBOL_GPL(adf_cfg_section_add);
int adf_cfg_get_param_value(struct adf_accel_dev *accel_dev,
const char *section, const char *name,
char *value)
{
struct adf_cfg_device_data *cfg = accel_dev->cfg;
int ret;
down_read(&cfg->lock);
ret = adf_cfg_key_val_get(accel_dev, section, name, value);
up_read(&cfg->lock);
return ret;
}