| /* |
| This file is provided under a dual BSD/GPLv2 license. When using or |
| redistributing this file, you may do so under either license. |
| |
| GPL LICENSE SUMMARY |
| Copyright(c) 2014 Intel Corporation. |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of version 2 of the GNU General Public License as |
| published by the Free Software Foundation. |
| |
| This program is distributed in the hope that it will be useful, but |
| WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| General Public License for more details. |
| |
| Contact Information: |
| qat-linux@intel.com |
| |
| BSD LICENSE |
| Copyright(c) 2014 Intel Corporation. |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| * Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| * Redistributions in binary form must reproduce the above copyright |
| notice, this list of conditions and the following disclaimer in |
| the documentation and/or other materials provided with the |
| distribution. |
| * Neither the name of Intel Corporation nor the names of its |
| contributors may be used to endorse or promote products derived |
| from this software without specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| #include <linux/delay.h> |
| #include "adf_accel_devices.h" |
| #include "adf_transport_internal.h" |
| #include "adf_transport_access_macros.h" |
| #include "adf_cfg.h" |
| #include "adf_common_drv.h" |
| |
| static inline uint32_t adf_modulo(uint32_t data, uint32_t shift) |
| { |
| uint32_t div = data >> shift; |
| uint32_t mult = div << shift; |
| |
| return data - mult; |
| } |
| |
| static inline int adf_check_ring_alignment(uint64_t addr, uint64_t size) |
| { |
| if (((size - 1) & addr) != 0) |
| return -EFAULT; |
| return 0; |
| } |
| |
| static int adf_verify_ring_size(uint32_t msg_size, uint32_t msg_num) |
| { |
| int i = ADF_MIN_RING_SIZE; |
| |
| for (; i <= ADF_MAX_RING_SIZE; i++) |
| if ((msg_size * msg_num) == ADF_SIZE_TO_RING_SIZE_IN_BYTES(i)) |
| return i; |
| |
| return ADF_DEFAULT_RING_SIZE; |
| } |
| |
| static int adf_reserve_ring(struct adf_etr_bank_data *bank, uint32_t ring) |
| { |
| spin_lock(&bank->lock); |
| if (bank->ring_mask & (1 << ring)) { |
| spin_unlock(&bank->lock); |
| return -EFAULT; |
| } |
| bank->ring_mask |= (1 << ring); |
| spin_unlock(&bank->lock); |
| return 0; |
| } |
| |
| static void adf_unreserve_ring(struct adf_etr_bank_data *bank, uint32_t ring) |
| { |
| spin_lock(&bank->lock); |
| bank->ring_mask &= ~(1 << ring); |
| spin_unlock(&bank->lock); |
| } |
| |
| static void adf_enable_ring_irq(struct adf_etr_bank_data *bank, uint32_t ring) |
| { |
| spin_lock_bh(&bank->lock); |
| bank->irq_mask |= (1 << ring); |
| spin_unlock_bh(&bank->lock); |
| WRITE_CSR_INT_COL_EN(bank->csr_addr, bank->bank_number, bank->irq_mask); |
| WRITE_CSR_INT_COL_CTL(bank->csr_addr, bank->bank_number, |
| bank->irq_coalesc_timer); |
| } |
| |
| static void adf_disable_ring_irq(struct adf_etr_bank_data *bank, uint32_t ring) |
| { |
| spin_lock_bh(&bank->lock); |
| bank->irq_mask &= ~(1 << ring); |
| spin_unlock_bh(&bank->lock); |
| WRITE_CSR_INT_COL_EN(bank->csr_addr, bank->bank_number, bank->irq_mask); |
| } |
| |
| int adf_send_message(struct adf_etr_ring_data *ring, uint32_t *msg) |
| { |
| if (atomic_add_return(1, ring->inflights) > |
| ADF_MAX_INFLIGHTS(ring->ring_size, ring->msg_size)) { |
| atomic_dec(ring->inflights); |
| return -EAGAIN; |
| } |
| spin_lock_bh(&ring->lock); |
| memcpy(ring->base_addr + ring->tail, msg, |
| ADF_MSG_SIZE_TO_BYTES(ring->msg_size)); |
| |
| ring->tail = adf_modulo(ring->tail + |
| ADF_MSG_SIZE_TO_BYTES(ring->msg_size), |
| ADF_RING_SIZE_MODULO(ring->ring_size)); |
| WRITE_CSR_RING_TAIL(ring->bank->csr_addr, ring->bank->bank_number, |
| ring->ring_number, ring->tail); |
| spin_unlock_bh(&ring->lock); |
| return 0; |
| } |
| |
| static int adf_handle_response(struct adf_etr_ring_data *ring) |
| { |
| uint32_t msg_counter = 0; |
| uint32_t *msg = (uint32_t *)(ring->base_addr + ring->head); |
| |
| while (*msg != ADF_RING_EMPTY_SIG) { |
| ring->callback((uint32_t *)msg); |
| *msg = ADF_RING_EMPTY_SIG; |
| ring->head = adf_modulo(ring->head + |
| ADF_MSG_SIZE_TO_BYTES(ring->msg_size), |
| ADF_RING_SIZE_MODULO(ring->ring_size)); |
| msg_counter++; |
| msg = (uint32_t *)(ring->base_addr + ring->head); |
| } |
| if (msg_counter > 0) { |
| WRITE_CSR_RING_HEAD(ring->bank->csr_addr, |
| ring->bank->bank_number, |
| ring->ring_number, ring->head); |
| atomic_sub(msg_counter, ring->inflights); |
| } |
| return 0; |
| } |
| |
| static void adf_configure_tx_ring(struct adf_etr_ring_data *ring) |
| { |
| uint32_t ring_config = BUILD_RING_CONFIG(ring->ring_size); |
| |
| WRITE_CSR_RING_CONFIG(ring->bank->csr_addr, ring->bank->bank_number, |
| ring->ring_number, ring_config); |
| } |
| |
| static void adf_configure_rx_ring(struct adf_etr_ring_data *ring) |
| { |
| uint32_t ring_config = |
| BUILD_RESP_RING_CONFIG(ring->ring_size, |
| ADF_RING_NEAR_WATERMARK_512, |
| ADF_RING_NEAR_WATERMARK_0); |
| |
| WRITE_CSR_RING_CONFIG(ring->bank->csr_addr, ring->bank->bank_number, |
| ring->ring_number, ring_config); |
| } |
| |
| static int adf_init_ring(struct adf_etr_ring_data *ring) |
| { |
| struct adf_etr_bank_data *bank = ring->bank; |
| struct adf_accel_dev *accel_dev = bank->accel_dev; |
| struct adf_hw_device_data *hw_data = accel_dev->hw_device; |
| uint64_t ring_base; |
| uint32_t ring_size_bytes = |
| ADF_SIZE_TO_RING_SIZE_IN_BYTES(ring->ring_size); |
| |
| ring_size_bytes = ADF_RING_SIZE_BYTES_MIN(ring_size_bytes); |
| ring->base_addr = dma_alloc_coherent(&GET_DEV(accel_dev), |
| ring_size_bytes, &ring->dma_addr, |
| GFP_KERNEL); |
| if (!ring->base_addr) |
| return -ENOMEM; |
| |
| memset(ring->base_addr, 0x7F, ring_size_bytes); |
| /* The base_addr has to be aligned to the size of the buffer */ |
| if (adf_check_ring_alignment(ring->dma_addr, ring_size_bytes)) { |
| pr_err("QAT: Ring address not aligned\n"); |
| dma_free_coherent(&GET_DEV(accel_dev), ring_size_bytes, |
| ring->base_addr, ring->dma_addr); |
| return -EFAULT; |
| } |
| |
| if (hw_data->tx_rings_mask & (1 << ring->ring_number)) |
| adf_configure_tx_ring(ring); |
| |
| else |
| adf_configure_rx_ring(ring); |
| |
| ring_base = BUILD_RING_BASE_ADDR(ring->dma_addr, ring->ring_size); |
| WRITE_CSR_RING_BASE(ring->bank->csr_addr, ring->bank->bank_number, |
| ring->ring_number, ring_base); |
| spin_lock_init(&ring->lock); |
| return 0; |
| } |
| |
| static void adf_cleanup_ring(struct adf_etr_ring_data *ring) |
| { |
| uint32_t ring_size_bytes = |
| ADF_SIZE_TO_RING_SIZE_IN_BYTES(ring->ring_size); |
| ring_size_bytes = ADF_RING_SIZE_BYTES_MIN(ring_size_bytes); |
| |
| if (ring->base_addr) { |
| memset(ring->base_addr, 0x7F, ring_size_bytes); |
| dma_free_coherent(&GET_DEV(ring->bank->accel_dev), |
| ring_size_bytes, ring->base_addr, |
| ring->dma_addr); |
| } |
| } |
| |
| int adf_create_ring(struct adf_accel_dev *accel_dev, const char *section, |
| uint32_t bank_num, uint32_t num_msgs, |
| uint32_t msg_size, const char *ring_name, |
| adf_callback_fn callback, int poll_mode, |
| struct adf_etr_ring_data **ring_ptr) |
| { |
| struct adf_etr_data *transport_data = accel_dev->transport; |
| struct adf_etr_bank_data *bank; |
| struct adf_etr_ring_data *ring; |
| char val[ADF_CFG_MAX_VAL_LEN_IN_BYTES]; |
| uint32_t ring_num; |
| int ret; |
| |
| if (bank_num >= GET_MAX_BANKS(accel_dev)) { |
| pr_err("QAT: Invalid bank number\n"); |
| return -EFAULT; |
| } |
| if (msg_size > ADF_MSG_SIZE_TO_BYTES(ADF_MAX_MSG_SIZE)) { |
| pr_err("QAT: Invalid msg size\n"); |
| return -EFAULT; |
| } |
| if (ADF_MAX_INFLIGHTS(adf_verify_ring_size(msg_size, num_msgs), |
| ADF_BYTES_TO_MSG_SIZE(msg_size)) < 2) { |
| pr_err("QAT: Invalid ring size for given msg size\n"); |
| return -EFAULT; |
| } |
| if (adf_cfg_get_param_value(accel_dev, section, ring_name, val)) { |
| pr_err("QAT: Section %s, no such entry : %s\n", |
| section, ring_name); |
| return -EFAULT; |
| } |
| if (kstrtouint(val, 10, &ring_num)) { |
| pr_err("QAT: Can't get ring number\n"); |
| return -EFAULT; |
| } |
| |
| bank = &transport_data->banks[bank_num]; |
| if (adf_reserve_ring(bank, ring_num)) { |
| pr_err("QAT: Ring %d, %s already exists.\n", |
| ring_num, ring_name); |
| return -EFAULT; |
| } |
| ring = &bank->rings[ring_num]; |
| ring->ring_number = ring_num; |
| ring->bank = bank; |
| ring->callback = callback; |
| ring->msg_size = ADF_BYTES_TO_MSG_SIZE(msg_size); |
| ring->ring_size = adf_verify_ring_size(msg_size, num_msgs); |
| ring->head = 0; |
| ring->tail = 0; |
| atomic_set(ring->inflights, 0); |
| ret = adf_init_ring(ring); |
| if (ret) |
| goto err; |
| |
| /* Enable HW arbitration for the given ring */ |
| accel_dev->hw_device->hw_arb_ring_enable(ring); |
| |
| if (adf_ring_debugfs_add(ring, ring_name)) { |
| pr_err("QAT: Couldn't add ring debugfs entry\n"); |
| ret = -EFAULT; |
| goto err; |
| } |
| |
| /* Enable interrupts if needed */ |
| if (callback && (!poll_mode)) |
| adf_enable_ring_irq(bank, ring->ring_number); |
| *ring_ptr = ring; |
| return 0; |
| err: |
| adf_cleanup_ring(ring); |
| adf_unreserve_ring(bank, ring_num); |
| accel_dev->hw_device->hw_arb_ring_disable(ring); |
| return ret; |
| } |
| |
| void adf_remove_ring(struct adf_etr_ring_data *ring) |
| { |
| struct adf_etr_bank_data *bank = ring->bank; |
| struct adf_accel_dev *accel_dev = bank->accel_dev; |
| |
| /* Disable interrupts for the given ring */ |
| adf_disable_ring_irq(bank, ring->ring_number); |
| |
| /* Clear PCI config space */ |
| WRITE_CSR_RING_CONFIG(bank->csr_addr, bank->bank_number, |
| ring->ring_number, 0); |
| WRITE_CSR_RING_BASE(bank->csr_addr, bank->bank_number, |
| ring->ring_number, 0); |
| adf_ring_debugfs_rm(ring); |
| adf_unreserve_ring(bank, ring->ring_number); |
| /* Disable HW arbitration for the given ring */ |
| accel_dev->hw_device->hw_arb_ring_disable(ring); |
| adf_cleanup_ring(ring); |
| } |
| |
| static void adf_ring_response_handler(struct adf_etr_bank_data *bank) |
| { |
| uint32_t empty_rings, i; |
| |
| empty_rings = READ_CSR_E_STAT(bank->csr_addr, bank->bank_number); |
| empty_rings = ~empty_rings & bank->irq_mask; |
| |
| for (i = 0; i < ADF_ETR_MAX_RINGS_PER_BANK; ++i) { |
| if (empty_rings & (1 << i)) |
| adf_handle_response(&bank->rings[i]); |
| } |
| } |
| |
| /** |
| * adf_response_handler() - Bottom half handler response handler |
| * @bank_addr: Address of a ring bank for with the BH was scheduled. |
| * |
| * Function is the bottom half handler for the response from acceleration |
| * device. There is one handler for every ring bank. Function checks all |
| * communication rings in the bank. |
| * To be used by QAT device specific drivers. |
| * |
| * Return: void |
| */ |
| void adf_response_handler(unsigned long bank_addr) |
| { |
| struct adf_etr_bank_data *bank = (void *)bank_addr; |
| |
| /* Handle all the responses nad reenable IRQs */ |
| adf_ring_response_handler(bank); |
| WRITE_CSR_INT_FLAG_AND_COL(bank->csr_addr, bank->bank_number, |
| bank->irq_mask); |
| } |
| EXPORT_SYMBOL_GPL(adf_response_handler); |
| |
| static inline int adf_get_cfg_int(struct adf_accel_dev *accel_dev, |
| const char *section, const char *format, |
| uint32_t key, uint32_t *value) |
| { |
| char key_buf[ADF_CFG_MAX_KEY_LEN_IN_BYTES]; |
| char val_buf[ADF_CFG_MAX_VAL_LEN_IN_BYTES]; |
| |
| snprintf(key_buf, ADF_CFG_MAX_KEY_LEN_IN_BYTES, format, key); |
| |
| if (adf_cfg_get_param_value(accel_dev, section, key_buf, val_buf)) |
| return -EFAULT; |
| |
| if (kstrtouint(val_buf, 10, value)) |
| return -EFAULT; |
| return 0; |
| } |
| |
| static void adf_get_coalesc_timer(struct adf_etr_bank_data *bank, |
| const char *section, |
| uint32_t bank_num_in_accel) |
| { |
| if (adf_get_cfg_int(bank->accel_dev, section, |
| ADF_ETRMGR_COALESCE_TIMER_FORMAT, |
| bank_num_in_accel, &bank->irq_coalesc_timer)) |
| bank->irq_coalesc_timer = ADF_COALESCING_DEF_TIME; |
| |
| if (ADF_COALESCING_MAX_TIME < bank->irq_coalesc_timer || |
| ADF_COALESCING_MIN_TIME > bank->irq_coalesc_timer) |
| bank->irq_coalesc_timer = ADF_COALESCING_DEF_TIME; |
| } |
| |
| static int adf_init_bank(struct adf_accel_dev *accel_dev, |
| struct adf_etr_bank_data *bank, |
| uint32_t bank_num, void __iomem *csr_addr) |
| { |
| struct adf_hw_device_data *hw_data = accel_dev->hw_device; |
| struct adf_etr_ring_data *ring; |
| struct adf_etr_ring_data *tx_ring; |
| uint32_t i, coalesc_enabled = 0; |
| |
| memset(bank, 0, sizeof(*bank)); |
| bank->bank_number = bank_num; |
| bank->csr_addr = csr_addr; |
| bank->accel_dev = accel_dev; |
| spin_lock_init(&bank->lock); |
| |
| /* Enable IRQ coalescing always. This will allow to use |
| * the optimised flag and coalesc register. |
| * If it is disabled in the config file just use min time value */ |
| if ((adf_get_cfg_int(accel_dev, "Accelerator0", |
| ADF_ETRMGR_COALESCING_ENABLED_FORMAT, bank_num, |
| &coalesc_enabled) == 0) && coalesc_enabled) |
| adf_get_coalesc_timer(bank, "Accelerator0", bank_num); |
| else |
| bank->irq_coalesc_timer = ADF_COALESCING_MIN_TIME; |
| |
| for (i = 0; i < ADF_ETR_MAX_RINGS_PER_BANK; i++) { |
| WRITE_CSR_RING_CONFIG(csr_addr, bank_num, i, 0); |
| WRITE_CSR_RING_BASE(csr_addr, bank_num, i, 0); |
| ring = &bank->rings[i]; |
| if (hw_data->tx_rings_mask & (1 << i)) { |
| ring->inflights = |
| kzalloc_node(sizeof(atomic_t), |
| GFP_KERNEL, |
| dev_to_node(&GET_DEV(accel_dev))); |
| if (!ring->inflights) |
| goto err; |
| } else { |
| if (i < hw_data->tx_rx_gap) { |
| pr_err("QAT: Invalid tx rings mask config\n"); |
| goto err; |
| } |
| tx_ring = &bank->rings[i - hw_data->tx_rx_gap]; |
| ring->inflights = tx_ring->inflights; |
| } |
| } |
| if (adf_bank_debugfs_add(bank)) { |
| pr_err("QAT: Failed to add bank debugfs entry\n"); |
| goto err; |
| } |
| |
| WRITE_CSR_INT_SRCSEL(csr_addr, bank_num); |
| return 0; |
| err: |
| for (i = 0; i < ADF_ETR_MAX_RINGS_PER_BANK; i++) { |
| ring = &bank->rings[i]; |
| if (hw_data->tx_rings_mask & (1 << i) && ring->inflights) |
| kfree(ring->inflights); |
| } |
| return -ENOMEM; |
| } |
| |
| /** |
| * adf_init_etr_data() - Initialize transport rings for acceleration device |
| * @accel_dev: Pointer to acceleration device. |
| * |
| * Function is the initializes the communications channels (rings) to the |
| * acceleration device accel_dev. |
| * To be used by QAT device specific drivers. |
| * |
| * Return: 0 on success, error code othewise. |
| */ |
| int adf_init_etr_data(struct adf_accel_dev *accel_dev) |
| { |
| struct adf_etr_data *etr_data; |
| struct adf_hw_device_data *hw_data = accel_dev->hw_device; |
| void __iomem *csr_addr; |
| uint32_t size; |
| uint32_t num_banks = 0; |
| int i, ret; |
| |
| etr_data = kzalloc_node(sizeof(*etr_data), GFP_KERNEL, |
| dev_to_node(&GET_DEV(accel_dev))); |
| if (!etr_data) |
| return -ENOMEM; |
| |
| num_banks = GET_MAX_BANKS(accel_dev); |
| size = num_banks * sizeof(struct adf_etr_bank_data); |
| etr_data->banks = kzalloc_node(size, GFP_KERNEL, |
| dev_to_node(&GET_DEV(accel_dev))); |
| if (!etr_data->banks) { |
| ret = -ENOMEM; |
| goto err_bank; |
| } |
| |
| accel_dev->transport = etr_data; |
| i = hw_data->get_etr_bar_id(hw_data); |
| csr_addr = accel_dev->accel_pci_dev.pci_bars[i].virt_addr; |
| |
| /* accel_dev->debugfs_dir should always be non-NULL here */ |
| etr_data->debug = debugfs_create_dir("transport", |
| accel_dev->debugfs_dir); |
| if (!etr_data->debug) { |
| pr_err("QAT: Unable to create transport debugfs entry\n"); |
| ret = -ENOENT; |
| goto err_bank_debug; |
| } |
| |
| for (i = 0; i < num_banks; i++) { |
| ret = adf_init_bank(accel_dev, &etr_data->banks[i], i, |
| csr_addr); |
| if (ret) |
| goto err_bank_all; |
| } |
| |
| return 0; |
| |
| err_bank_all: |
| debugfs_remove(etr_data->debug); |
| err_bank_debug: |
| kfree(etr_data->banks); |
| err_bank: |
| kfree(etr_data); |
| accel_dev->transport = NULL; |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(adf_init_etr_data); |
| |
| static void cleanup_bank(struct adf_etr_bank_data *bank) |
| { |
| uint32_t i; |
| |
| for (i = 0; i < ADF_ETR_MAX_RINGS_PER_BANK; i++) { |
| struct adf_accel_dev *accel_dev = bank->accel_dev; |
| struct adf_hw_device_data *hw_data = accel_dev->hw_device; |
| struct adf_etr_ring_data *ring = &bank->rings[i]; |
| |
| if (bank->ring_mask & (1 << i)) |
| adf_cleanup_ring(ring); |
| |
| if (hw_data->tx_rings_mask & (1 << i)) |
| kfree(ring->inflights); |
| } |
| adf_bank_debugfs_rm(bank); |
| memset(bank, 0, sizeof(*bank)); |
| } |
| |
| static void adf_cleanup_etr_handles(struct adf_accel_dev *accel_dev) |
| { |
| struct adf_etr_data *etr_data = accel_dev->transport; |
| uint32_t i, num_banks = GET_MAX_BANKS(accel_dev); |
| |
| for (i = 0; i < num_banks; i++) |
| cleanup_bank(&etr_data->banks[i]); |
| } |
| |
| /** |
| * adf_cleanup_etr_data() - Clear transport rings for acceleration device |
| * @accel_dev: Pointer to acceleration device. |
| * |
| * Function is the clears the communications channels (rings) of the |
| * acceleration device accel_dev. |
| * To be used by QAT device specific drivers. |
| * |
| * Return: void |
| */ |
| void adf_cleanup_etr_data(struct adf_accel_dev *accel_dev) |
| { |
| struct adf_etr_data *etr_data = accel_dev->transport; |
| |
| if (etr_data) { |
| adf_cleanup_etr_handles(accel_dev); |
| debugfs_remove(etr_data->debug); |
| kfree(etr_data->banks); |
| kfree(etr_data); |
| accel_dev->transport = NULL; |
| } |
| } |
| EXPORT_SYMBOL_GPL(adf_cleanup_etr_data); |