| /* |
| * Broadcom BCM470X / BCM5301X ARM platform code. |
| * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015, |
| * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs |
| * |
| * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de> |
| * |
| * Licensed under the GNU/GPL. See COPYING for details. |
| */ |
| |
| #include <dt-bindings/clock/bcm-nsp.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&gic>; |
| |
| chipcommonA@18000000 { |
| compatible = "simple-bus"; |
| ranges = <0x00000000 0x18000000 0x00001000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| uart0: serial@300 { |
| compatible = "ns16550"; |
| reg = <0x0300 0x100>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&iprocslow>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@400 { |
| compatible = "ns16550"; |
| reg = <0x0400 0x100>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&iprocslow>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinmux_uart1>; |
| status = "disabled"; |
| }; |
| }; |
| |
| mpcore@19000000 { |
| compatible = "simple-bus"; |
| ranges = <0x00000000 0x19000000 0x00023000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| a9pll: arm_clk@0 { |
| #clock-cells = <0>; |
| compatible = "brcm,nsp-armpll"; |
| clocks = <&osc>; |
| reg = <0x00000 0x1000>; |
| }; |
| |
| scu@20000 { |
| compatible = "arm,cortex-a9-scu"; |
| reg = <0x20000 0x100>; |
| }; |
| |
| timer@20200 { |
| compatible = "arm,cortex-a9-global-timer"; |
| reg = <0x20200 0x100>; |
| interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&periph_clk>; |
| }; |
| |
| timer@20600 { |
| compatible = "arm,cortex-a9-twd-timer"; |
| reg = <0x20600 0x20>; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | |
| IRQ_TYPE_EDGE_RISING)>; |
| clocks = <&periph_clk>; |
| }; |
| |
| watchdog@20620 { |
| compatible = "arm,cortex-a9-twd-wdt"; |
| reg = <0x20620 0x20>; |
| interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | |
| IRQ_TYPE_EDGE_RISING)>; |
| clocks = <&periph_clk>; |
| }; |
| |
| gic: interrupt-controller@21000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0x21000 0x1000>, |
| <0x20100 0x100>; |
| }; |
| |
| L2: cache-controller@22000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0x22000 0x1000>; |
| cache-unified; |
| arm,shared-override; |
| prefetch-data = <1>; |
| prefetch-instr = <1>; |
| cache-level = <2>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a9-pmu"; |
| interrupts = |
| <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| osc: oscillator { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <25000000>; |
| }; |
| |
| iprocmed: iprocmed { |
| #clock-cells = <0>; |
| compatible = "fixed-factor-clock"; |
| clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; |
| clock-div = <2>; |
| clock-mult = <1>; |
| }; |
| |
| iprocslow: iprocslow { |
| #clock-cells = <0>; |
| compatible = "fixed-factor-clock"; |
| clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; |
| clock-div = <4>; |
| clock-mult = <1>; |
| }; |
| |
| periph_clk: periph_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-factor-clock"; |
| clocks = <&a9pll>; |
| clock-div = <2>; |
| clock-mult = <1>; |
| }; |
| }; |
| |
| usb2_phy: usb2-phy@1800c000 { |
| compatible = "brcm,ns-usb2-phy"; |
| reg = <0x1800c000 0x1000>; |
| reg-names = "dmu"; |
| #phy-cells = <0>; |
| clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; |
| clock-names = "phy-ref-clk"; |
| }; |
| |
| axi@18000000 { |
| compatible = "brcm,bus-axi"; |
| reg = <0x18000000 0x1000>; |
| ranges = <0x00000000 0x18000000 0x00100000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0x000fffff 0xffff>; |
| interrupt-map = |
| /* ChipCommon */ |
| <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, |
| |
| /* Switch Register Access Block */ |
| <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| |
| /* PCIe Controller 0 */ |
| <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| |
| /* PCIe Controller 1 */ |
| <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, |
| |
| /* PCIe Controller 2 */ |
| <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, |
| |
| /* USB 2.0 Controller */ |
| <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, |
| |
| /* USB 3.0 Controller */ |
| <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, |
| |
| /* Ethernet Controller 0 */ |
| <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| |
| /* Ethernet Controller 1 */ |
| <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, |
| |
| /* Ethernet Controller 2 */ |
| <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, |
| |
| /* Ethernet Controller 3 */ |
| <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, |
| |
| /* NAND Controller */ |
| <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| |
| chipcommon: chipcommon@0 { |
| reg = <0x00000000 0x1000>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| pcie0: pcie@12000 { |
| reg = <0x00012000 0x1000>; |
| }; |
| |
| pcie1: pcie@13000 { |
| reg = <0x00013000 0x1000>; |
| }; |
| |
| usb2: usb2@21000 { |
| reg = <0x00021000 0x1000>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| interrupt-parent = <&gic>; |
| |
| ehci: ehci@21000 { |
| #usb-cells = <0>; |
| |
| compatible = "generic-ehci"; |
| reg = <0x00021000 0x1000>; |
| interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&usb2_phy>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ehci_port1: port@1 { |
| reg = <1>; |
| #trigger-source-cells = <0>; |
| }; |
| |
| ehci_port2: port@2 { |
| reg = <2>; |
| #trigger-source-cells = <0>; |
| }; |
| }; |
| |
| ohci: ohci@22000 { |
| #usb-cells = <0>; |
| |
| compatible = "generic-ohci"; |
| reg = <0x00022000 0x1000>; |
| interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ohci_port1: port@1 { |
| reg = <1>; |
| #trigger-source-cells = <0>; |
| }; |
| |
| ohci_port2: port@2 { |
| reg = <2>; |
| #trigger-source-cells = <0>; |
| }; |
| }; |
| }; |
| |
| usb3: usb3@23000 { |
| reg = <0x00023000 0x1000>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| interrupt-parent = <&gic>; |
| |
| xhci: xhci@23000 { |
| #usb-cells = <0>; |
| |
| compatible = "generic-xhci"; |
| reg = <0x00023000 0x1000>; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&usb3_phy>; |
| phy-names = "usb"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| xhci_port1: port@1 { |
| reg = <1>; |
| #trigger-source-cells = <0>; |
| }; |
| }; |
| }; |
| |
| gmac0: ethernet@24000 { |
| reg = <0x24000 0x800>; |
| }; |
| |
| gmac1: ethernet@25000 { |
| reg = <0x25000 0x800>; |
| }; |
| |
| gmac2: ethernet@26000 { |
| reg = <0x26000 0x800>; |
| }; |
| |
| gmac3: ethernet@27000 { |
| reg = <0x27000 0x800>; |
| }; |
| }; |
| |
| mdio: mdio@18003000 { |
| compatible = "brcm,iproc-mdio"; |
| reg = <0x18003000 0x8>; |
| #size-cells = <0>; |
| #address-cells = <1>; |
| }; |
| |
| mdio-bus-mux@18003000 { |
| compatible = "mdio-mux-mmioreg"; |
| mdio-parent-bus = <&mdio>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x18003000 0x4>; |
| mux-mask = <0x200>; |
| |
| mdio@0 { |
| reg = <0x0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| usb3_phy: usb3-phy@10 { |
| compatible = "brcm,ns-ax-usb3-phy"; |
| reg = <0x10>; |
| usb3-dmp-syscon = <&usb3_dmp>; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| usb3_dmp: syscon@18105000 { |
| reg = <0x18105000 0x1000>; |
| }; |
| |
| i2c0: i2c@18009000 { |
| compatible = "brcm,iproc-i2c"; |
| reg = <0x18009000 0x50>; |
| interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| dmu@1800c000 { |
| compatible = "simple-bus"; |
| ranges = <0 0x1800c000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cru@100 { |
| compatible = "simple-bus"; |
| reg = <0x100 0x1a4>; |
| ranges; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| pin-controller@1c0 { |
| compatible = "brcm,bcm4708-pinmux"; |
| reg = <0x1c0 0x24>; |
| reg-names = "cru_gpio_control"; |
| |
| spi-pins { |
| groups = "spi_grp"; |
| function = "spi"; |
| }; |
| |
| i2c { |
| groups = "i2c_grp"; |
| function = "i2c"; |
| }; |
| |
| pwm { |
| groups = "pwm0_grp", "pwm1_grp", |
| "pwm2_grp", "pwm3_grp"; |
| function = "pwm"; |
| }; |
| |
| pinmux_uart1: uart1 { |
| groups = "uart1_grp"; |
| function = "uart1"; |
| }; |
| }; |
| }; |
| }; |
| |
| lcpll0: lcpll0@1800c100 { |
| #clock-cells = <1>; |
| compatible = "brcm,nsp-lcpll0"; |
| reg = <0x1800c100 0x14>; |
| clocks = <&osc>; |
| clock-output-names = "lcpll0", "pcie_phy", "sdio", |
| "ddr_phy"; |
| }; |
| |
| genpll: genpll@1800c140 { |
| #clock-cells = <1>; |
| compatible = "brcm,nsp-genpll"; |
| reg = <0x1800c140 0x24>; |
| clocks = <&osc>; |
| clock-output-names = "genpll", "phy", "ethernetclk", |
| "usbclk", "iprocfast", "sata1", |
| "sata2"; |
| }; |
| |
| thermal: thermal@1800c2c0 { |
| compatible = "brcm,ns-thermal"; |
| reg = <0x1800c2c0 0x10>; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| srab: srab@18007000 { |
| compatible = "brcm,bcm5301x-srab"; |
| reg = <0x18007000 0x1000>; |
| |
| status = "disabled"; |
| |
| /* ports are defined in board DTS */ |
| }; |
| |
| rng: rng@18004000 { |
| compatible = "brcm,bcm5301x-rng"; |
| reg = <0x18004000 0x14>; |
| }; |
| |
| nand: nand@18028000 { |
| compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; |
| reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; |
| reg-names = "nand", "iproc-idm", "iproc-ext"; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| brcm,nand-has-wp; |
| }; |
| |
| spi@18029200 { |
| compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; |
| reg = <0x18029200 0x184>, |
| <0x18029000 0x124>, |
| <0x1811b408 0x004>, |
| <0x180293a0 0x01c>; |
| reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "spi_lr_fullness_reached", |
| "spi_lr_session_aborted", |
| "spi_lr_impatient", |
| "spi_lr_session_done", |
| "spi_lr_overhead", |
| "mspi_done", |
| "mspi_halted"; |
| clocks = <&iprocmed>; |
| clock-names = "iprocmed"; |
| num-cs = <2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| spi_nor: spi-nor@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <20000000>; |
| status = "disabled"; |
| |
| partitions { |
| compatible = "brcm,bcm947xx-cfe-partitions"; |
| }; |
| }; |
| }; |
| |
| thermal-zones { |
| cpu_thermal: cpu-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <1000>; |
| coefficients = <(-556) 418000>; |
| thermal-sensors = <&thermal>; |
| |
| trips { |
| cpu-crit { |
| temperature = <125000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| }; |
| }; |
| }; |
| }; |
