| /* |
| * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/clock/sun8i-de2.h> |
| #include <dt-bindings/clock/sun8i-h3-ccu.h> |
| #include <dt-bindings/clock/sun8i-r-ccu.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/reset/sun8i-de2.h> |
| #include <dt-bindings/reset/sun8i-h3-ccu.h> |
| #include <dt-bindings/reset/sun8i-r-ccu.h> |
| |
| / { |
| interrupt-parent = <&gic>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| chosen { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| framebuffer-hdmi { |
| compatible = "allwinner,simple-framebuffer", |
| "simple-framebuffer"; |
| allwinner,pipeline = "mixer0-lcd0-hdmi"; |
| clocks = <&display_clocks CLK_MIXER0>, |
| <&ccu CLK_TCON0>, <&ccu CLK_HDMI>; |
| status = "disabled"; |
| }; |
| |
| framebuffer-tve { |
| compatible = "allwinner,simple-framebuffer", |
| "simple-framebuffer"; |
| allwinner,pipeline = "mixer1-lcd1-tve"; |
| clocks = <&display_clocks CLK_MIXER1>, |
| <&ccu CLK_TVE>; |
| status = "disabled"; |
| }; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| osc24M: osc24M_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-accuracy = <50000>; |
| clock-output-names = "osc24M"; |
| }; |
| |
| osc32k: osc32k_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| clock-accuracy = <50000>; |
| clock-output-names = "ext_osc32k"; |
| }; |
| }; |
| |
| cpu0_opp_table: opp_table0 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp-480000000 { |
| opp-hz = /bits/ 64 <480000000>; |
| opp-microvolt = <1040000 1040000 1300000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-648000000 { |
| opp-hz = /bits/ 64 <648000000>; |
| opp-microvolt = <1040000 1040000 1300000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-816000000 { |
| opp-hz = /bits/ 64 <816000000>; |
| opp-microvolt = <1100000 1100000 1300000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-960000000 { |
| opp-hz = /bits/ 64 <960000000>; |
| opp-microvolt = <1200000 1200000 1300000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-1008000000 { |
| opp-hz = /bits/ 64 <1008000000>; |
| opp-microvolt = <1200000 1200000 1300000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-1104000000 { |
| opp-hz = /bits/ 64 <1104000000>; |
| opp-microvolt = <1320000 1320000 1320000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-1200000000 { |
| opp-hz = /bits/ 64 <1200000000>; |
| opp-microvolt = <1320000 1320000 1320000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-1296000000 { |
| opp-hz = /bits/ 64 <1296000000>; |
| opp-microvolt = <1340000 1340000 1340000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-1368000000 { |
| opp-hz = /bits/ 64 <1368000000>; |
| opp-microvolt = <1400000 1400000 1400000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| }; |
| |
| de: display-engine { |
| compatible = "allwinner,sun8i-h3-display-engine"; |
| allwinner,pipelines = <&mixer0>; |
| status = "disabled"; |
| }; |
| |
| scpi_protocol: scpi { |
| compatible = "arm,scpi"; |
| mboxes = <&msgbox 2>, <&msgbox 3>; |
| mbox-names = "tx", "rx"; |
| shmem = <&scpi_sram>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| dma-ranges; |
| ranges; |
| |
| display_clocks: clock@1000000 { |
| /* compatible is in per SoC .dtsi file */ |
| reg = <0x01000000 0x10000>; |
| clocks = <&ccu CLK_BUS_DE>, |
| <&ccu CLK_DE>; |
| clock-names = "bus", |
| "mod"; |
| resets = <&ccu RST_BUS_DE>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| mixer0: mixer@1100000 { |
| compatible = "allwinner,sun8i-h3-de2-mixer-0"; |
| reg = <0x01100000 0x100000>; |
| clocks = <&display_clocks CLK_BUS_MIXER0>, |
| <&display_clocks CLK_MIXER0>; |
| clock-names = "bus", |
| "mod"; |
| resets = <&display_clocks RST_MIXER0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mixer0_out: port@1 { |
| reg = <1>; |
| |
| mixer0_out_tcon0: endpoint { |
| remote-endpoint = <&tcon0_in_mixer0>; |
| }; |
| }; |
| }; |
| }; |
| |
| dma: dma-controller@1c02000 { |
| compatible = "allwinner,sun8i-h3-dma"; |
| reg = <0x01c02000 0x1000>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_DMA>; |
| resets = <&ccu RST_BUS_DMA>; |
| #dma-cells = <1>; |
| }; |
| |
| tcon0: lcd-controller@1c0c000 { |
| compatible = "allwinner,sun8i-h3-tcon-tv", |
| "allwinner,sun8i-a83t-tcon-tv"; |
| reg = <0x01c0c000 0x1000>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; |
| clock-names = "ahb", "tcon-ch1"; |
| resets = <&ccu RST_BUS_TCON0>; |
| reset-names = "lcd"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| tcon0_in: port@0 { |
| reg = <0>; |
| |
| tcon0_in_mixer0: endpoint { |
| remote-endpoint = <&mixer0_out_tcon0>; |
| }; |
| }; |
| |
| tcon0_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| tcon0_out_hdmi: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&hdmi_in_tcon0>; |
| }; |
| }; |
| }; |
| }; |
| |
| mmc0: mmc@1c0f000 { |
| /* compatible and clocks are in per SoC .dtsi file */ |
| reg = <0x01c0f000 0x1000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc0_pins>; |
| resets = <&ccu RST_BUS_MMC0>; |
| reset-names = "ahb"; |
| interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc1: mmc@1c10000 { |
| /* compatible and clocks are in per SoC .dtsi file */ |
| reg = <0x01c10000 0x1000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc1_pins>; |
| resets = <&ccu RST_BUS_MMC1>; |
| reset-names = "ahb"; |
| interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc2: mmc@1c11000 { |
| /* compatible and clocks are in per SoC .dtsi file */ |
| reg = <0x01c11000 0x1000>; |
| resets = <&ccu RST_BUS_MMC2>; |
| reset-names = "ahb"; |
| interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| sid: eeprom@1c14000 { |
| /* compatible is in per SoC .dtsi file */ |
| reg = <0x1c14000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| ths_calibration: thermal-sensor-calibration@34 { |
| reg = <0x34 4>; |
| }; |
| }; |
| |
| msgbox: mailbox@1c17000 { |
| compatible = "allwinner,sun8i-h3-msgbox", |
| "allwinner,sun6i-a31-msgbox"; |
| reg = <0x01c17000 0x1000>; |
| clocks = <&ccu CLK_BUS_MSGBOX>; |
| resets = <&ccu RST_BUS_MSGBOX>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <1>; |
| }; |
| |
| usb_otg: usb@1c19000 { |
| compatible = "allwinner,sun8i-h3-musb"; |
| reg = <0x01c19000 0x400>; |
| clocks = <&ccu CLK_BUS_OTG>; |
| resets = <&ccu RST_BUS_OTG>; |
| interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "mc"; |
| phys = <&usbphy 0>; |
| phy-names = "usb"; |
| extcon = <&usbphy 0>; |
| dr_mode = "otg"; |
| status = "disabled"; |
| }; |
| |
| usbphy: phy@1c19400 { |
| compatible = "allwinner,sun8i-h3-usb-phy"; |
| reg = <0x01c19400 0x2c>, |
| <0x01c1a800 0x4>, |
| <0x01c1b800 0x4>, |
| <0x01c1c800 0x4>, |
| <0x01c1d800 0x4>; |
| reg-names = "phy_ctrl", |
| "pmu0", |
| "pmu1", |
| "pmu2", |
| "pmu3"; |
| clocks = <&ccu CLK_USB_PHY0>, |
| <&ccu CLK_USB_PHY1>, |
| <&ccu CLK_USB_PHY2>, |
| <&ccu CLK_USB_PHY3>; |
| clock-names = "usb0_phy", |
| "usb1_phy", |
| "usb2_phy", |
| "usb3_phy"; |
| resets = <&ccu RST_USB_PHY0>, |
| <&ccu RST_USB_PHY1>, |
| <&ccu RST_USB_PHY2>, |
| <&ccu RST_USB_PHY3>; |
| reset-names = "usb0_reset", |
| "usb1_reset", |
| "usb2_reset", |
| "usb3_reset"; |
| status = "disabled"; |
| #phy-cells = <1>; |
| }; |
| |
| ehci0: usb@1c1a000 { |
| compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; |
| reg = <0x01c1a000 0x100>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>; |
| resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; |
| status = "disabled"; |
| }; |
| |
| ohci0: usb@1c1a400 { |
| compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; |
| reg = <0x01c1a400 0x100>; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>, |
| <&ccu CLK_USB_OHCI0>; |
| resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; |
| status = "disabled"; |
| }; |
| |
| ehci1: usb@1c1b000 { |
| compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; |
| reg = <0x01c1b000 0x100>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; |
| resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci1: usb@1c1b400 { |
| compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; |
| reg = <0x01c1b400 0x100>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>, |
| <&ccu CLK_USB_OHCI1>; |
| resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ehci2: usb@1c1c000 { |
| compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; |
| reg = <0x01c1c000 0x100>; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; |
| resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; |
| phys = <&usbphy 2>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci2: usb@1c1c400 { |
| compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; |
| reg = <0x01c1c400 0x100>; |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>, |
| <&ccu CLK_USB_OHCI2>; |
| resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; |
| phys = <&usbphy 2>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ehci3: usb@1c1d000 { |
| compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; |
| reg = <0x01c1d000 0x100>; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; |
| resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; |
| phys = <&usbphy 3>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci3: usb@1c1d400 { |
| compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; |
| reg = <0x01c1d400 0x100>; |
| interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>, |
| <&ccu CLK_USB_OHCI3>; |
| resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; |
| phys = <&usbphy 3>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ccu: clock@1c20000 { |
| /* compatible is in per SoC .dtsi file */ |
| reg = <0x01c20000 0x400>; |
| clocks = <&osc24M>, <&rtc 0>; |
| clock-names = "hosc", "losc"; |
| protected-clocks = <CLK_BUS_MSGBOX>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| pio: pinctrl@1c20800 { |
| /* compatible is in per SoC .dtsi file */ |
| reg = <0x01c20800 0x400>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; |
| clock-names = "apb", "hosc", "losc"; |
| gpio-controller; |
| #gpio-cells = <3>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| |
| csi_pins: csi-pins { |
| pins = "PE0", "PE2", "PE3", "PE4", "PE5", |
| "PE6", "PE7", "PE8", "PE9", "PE10", |
| "PE11"; |
| function = "csi"; |
| }; |
| |
| emac_rgmii_pins: emac-rgmii-pins { |
| pins = "PD0", "PD1", "PD2", "PD3", "PD4", |
| "PD5", "PD7", "PD8", "PD9", "PD10", |
| "PD12", "PD13", "PD15", "PD16", "PD17"; |
| function = "emac"; |
| drive-strength = <40>; |
| }; |
| |
| i2c0_pins: i2c0-pins { |
| pins = "PA11", "PA12"; |
| function = "i2c0"; |
| }; |
| |
| i2c1_pins: i2c1-pins { |
| pins = "PA18", "PA19"; |
| function = "i2c1"; |
| }; |
| |
| i2c2_pins: i2c2-pins { |
| pins = "PE12", "PE13"; |
| function = "i2c2"; |
| }; |
| |
| mmc0_pins: mmc0-pins { |
| pins = "PF0", "PF1", "PF2", "PF3", |
| "PF4", "PF5"; |
| function = "mmc0"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| mmc1_pins: mmc1-pins { |
| pins = "PG0", "PG1", "PG2", "PG3", |
| "PG4", "PG5"; |
| function = "mmc1"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| mmc2_8bit_pins: mmc2-8bit-pins { |
| pins = "PC5", "PC6", "PC8", |
| "PC9", "PC10", "PC11", |
| "PC12", "PC13", "PC14", |
| "PC15", "PC16"; |
| function = "mmc2"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| spdif_tx_pin: spdif-tx-pin { |
| pins = "PA17"; |
| function = "spdif"; |
| }; |
| |
| spi0_pins: spi0-pins { |
| pins = "PC0", "PC1", "PC2", "PC3"; |
| function = "spi0"; |
| }; |
| |
| spi1_pins: spi1-pins { |
| pins = "PA15", "PA16", "PA14", "PA13"; |
| function = "spi1"; |
| }; |
| |
| uart0_pa_pins: uart0-pa-pins { |
| pins = "PA4", "PA5"; |
| function = "uart0"; |
| }; |
| |
| uart1_pins: uart1-pins { |
| pins = "PG6", "PG7"; |
| function = "uart1"; |
| }; |
| |
| uart1_rts_cts_pins: uart1-rts-cts-pins { |
| pins = "PG8", "PG9"; |
| function = "uart1"; |
| }; |
| |
| uart2_pins: uart2-pins { |
| pins = "PA0", "PA1"; |
| function = "uart2"; |
| }; |
| |
| uart2_rts_cts_pins: uart2-rts-cts-pins { |
| pins = "PA2", "PA3"; |
| function = "uart2"; |
| }; |
| |
| uart3_pins: uart3-pins { |
| pins = "PA13", "PA14"; |
| function = "uart3"; |
| }; |
| |
| uart3_rts_cts_pins: uart3-rts-cts-pins { |
| pins = "PA15", "PA16"; |
| function = "uart3"; |
| }; |
| }; |
| |
| timer@1c20c00 { |
| compatible = "allwinner,sun8i-a23-timer"; |
| reg = <0x01c20c00 0xa0>; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&osc24M>; |
| }; |
| |
| emac: ethernet@1c30000 { |
| compatible = "allwinner,sun8i-h3-emac"; |
| syscon = <&syscon>; |
| reg = <0x01c30000 0x10000>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq"; |
| resets = <&ccu RST_BUS_EMAC>; |
| reset-names = "stmmaceth"; |
| clocks = <&ccu CLK_BUS_EMAC>; |
| clock-names = "stmmaceth"; |
| status = "disabled"; |
| |
| mdio: mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,dwmac-mdio"; |
| }; |
| |
| mdio-mux { |
| compatible = "allwinner,sun8i-h3-mdio-mux"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mdio-parent-bus = <&mdio>; |
| /* Only one MDIO is usable at the time */ |
| internal_mdio: mdio@1 { |
| compatible = "allwinner,sun8i-h3-mdio-internal"; |
| reg = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| int_mii_phy: ethernet-phy@1 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <1>; |
| clocks = <&ccu CLK_BUS_EPHY>; |
| resets = <&ccu RST_BUS_EPHY>; |
| }; |
| }; |
| |
| external_mdio: mdio@2 { |
| reg = <2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| }; |
| |
| mbus: dram-controller@1c62000 { |
| compatible = "allwinner,sun8i-h3-mbus"; |
| reg = <0x01c62000 0x1000>; |
| clocks = <&ccu CLK_MBUS>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| dma-ranges = <0x00000000 0x40000000 0xc0000000>; |
| #interconnect-cells = <1>; |
| }; |
| |
| spi0: spi@1c68000 { |
| compatible = "allwinner,sun8i-h3-spi"; |
| reg = <0x01c68000 0x1000>; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma 23>, <&dma 23>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_pins>; |
| resets = <&ccu RST_BUS_SPI0>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| spi1: spi@1c69000 { |
| compatible = "allwinner,sun8i-h3-spi"; |
| reg = <0x01c69000 0x1000>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma 24>, <&dma 24>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi1_pins>; |
| resets = <&ccu RST_BUS_SPI1>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| wdt0: watchdog@1c20ca0 { |
| compatible = "allwinner,sun6i-a31-wdt"; |
| reg = <0x01c20ca0 0x20>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&osc24M>; |
| }; |
| |
| spdif: spdif@1c21000 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun8i-h3-spdif"; |
| reg = <0x01c21000 0x400>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; |
| resets = <&ccu RST_BUS_SPDIF>; |
| clock-names = "apb", "spdif"; |
| dmas = <&dma 2>; |
| dma-names = "tx"; |
| status = "disabled"; |
| }; |
| |
| pwm: pwm@1c21400 { |
| compatible = "allwinner,sun8i-h3-pwm"; |
| reg = <0x01c21400 0x8>; |
| clocks = <&osc24M>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| i2s0: i2s@1c22000 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun8i-h3-i2s"; |
| reg = <0x01c22000 0x400>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; |
| clock-names = "apb", "mod"; |
| dmas = <&dma 3>, <&dma 3>; |
| resets = <&ccu RST_BUS_I2S0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| i2s1: i2s@1c22400 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun8i-h3-i2s"; |
| reg = <0x01c22400 0x400>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; |
| clock-names = "apb", "mod"; |
| dmas = <&dma 4>, <&dma 4>; |
| resets = <&ccu RST_BUS_I2S1>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| i2s2: i2s@1c22800 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun8i-h3-i2s"; |
| reg = <0x01c22800 0x400>; |
| interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; |
| clock-names = "apb", "mod"; |
| dmas = <&dma 27>; |
| resets = <&ccu RST_BUS_I2S2>; |
| dma-names = "tx"; |
| status = "disabled"; |
| }; |
| |
| codec: codec@1c22c00 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun8i-h3-codec"; |
| reg = <0x01c22c00 0x400>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; |
| clock-names = "apb", "codec"; |
| resets = <&ccu RST_BUS_CODEC>; |
| dmas = <&dma 15>, <&dma 15>; |
| dma-names = "rx", "tx"; |
| allwinner,codec-analog-controls = <&codec_analog>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@1c28000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28000 0x400>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART0>; |
| resets = <&ccu RST_BUS_UART0>; |
| dmas = <&dma 6>, <&dma 6>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@1c28400 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28400 0x400>; |
| interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART1>; |
| resets = <&ccu RST_BUS_UART1>; |
| dmas = <&dma 7>, <&dma 7>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@1c28800 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28800 0x400>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART2>; |
| resets = <&ccu RST_BUS_UART2>; |
| dmas = <&dma 8>, <&dma 8>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@1c28c00 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28c00 0x400>; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART3>; |
| resets = <&ccu RST_BUS_UART3>; |
| dmas = <&dma 9>, <&dma 9>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@1c2ac00 { |
| compatible = "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2ac00 0x400>; |
| interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2C0>; |
| resets = <&ccu RST_BUS_I2C0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c1: i2c@1c2b000 { |
| compatible = "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2b000 0x400>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2C1>; |
| resets = <&ccu RST_BUS_I2C1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c2: i2c@1c2b400 { |
| compatible = "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2b400 0x400>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2C2>; |
| resets = <&ccu RST_BUS_I2C2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| gic: interrupt-controller@1c81000 { |
| compatible = "arm,gic-400"; |
| reg = <0x01c81000 0x1000>, |
| <0x01c82000 0x2000>, |
| <0x01c84000 0x2000>, |
| <0x01c86000 0x2000>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| csi: camera@1cb0000 { |
| compatible = "allwinner,sun8i-h3-csi"; |
| reg = <0x01cb0000 0x1000>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_CSI>, |
| <&ccu CLK_CSI_SCLK>, |
| <&ccu CLK_DRAM_CSI>; |
| clock-names = "bus", "mod", "ram"; |
| resets = <&ccu RST_BUS_CSI>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&csi_pins>; |
| status = "disabled"; |
| }; |
| |
| hdmi: hdmi@1ee0000 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun8i-h3-dw-hdmi", |
| "allwinner,sun8i-a83t-dw-hdmi"; |
| reg = <0x01ee0000 0x10000>; |
| reg-io-width = <1>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, |
| <&ccu CLK_HDMI>; |
| clock-names = "iahb", "isfr", "tmds"; |
| resets = <&ccu RST_BUS_HDMI1>; |
| reset-names = "ctrl"; |
| phys = <&hdmi_phy>; |
| phy-names = "phy"; |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| hdmi_in: port@0 { |
| reg = <0>; |
| |
| hdmi_in_tcon0: endpoint { |
| remote-endpoint = <&tcon0_out_hdmi>; |
| }; |
| }; |
| |
| hdmi_out: port@1 { |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| hdmi_phy: hdmi-phy@1ef0000 { |
| compatible = "allwinner,sun8i-h3-hdmi-phy"; |
| reg = <0x01ef0000 0x10000>; |
| clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, |
| <&ccu CLK_PLL_VIDEO>; |
| clock-names = "bus", "mod", "pll-0"; |
| resets = <&ccu RST_BUS_HDMI0>; |
| reset-names = "phy"; |
| #phy-cells = <0>; |
| }; |
| |
| rtc: rtc@1f00000 { |
| /* compatible is in per SoC .dtsi file */ |
| reg = <0x01f00000 0x400>; |
| interrupt-parent = <&r_intc>; |
| interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, |
| <9 IRQ_TYPE_LEVEL_HIGH>; |
| clock-output-names = "osc32k", "osc32k-out", "iosc"; |
| clocks = <&osc32k>; |
| #clock-cells = <1>; |
| }; |
| |
| r_intc: interrupt-controller@1f00c00 { |
| compatible = "allwinner,sun8i-h3-r-intc", |
| "allwinner,sun6i-a31-r-intc"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x01f00c00 0x400>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| r_ccu: clock@1f01400 { |
| compatible = "allwinner,sun8i-h3-r-ccu"; |
| reg = <0x01f01400 0x100>; |
| clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, |
| <&ccu CLK_PLL_PERIPH0>; |
| clock-names = "hosc", "losc", "iosc", "pll-periph"; |
| protected-clocks = <CLK_APB0_TWD>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| codec_analog: codec-analog@1f015c0 { |
| compatible = "allwinner,sun8i-h3-codec-analog"; |
| reg = <0x01f015c0 0x4>; |
| }; |
| |
| ir: ir@1f02000 { |
| compatible = "allwinner,sun6i-a31-ir"; |
| clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; |
| clock-names = "apb", "ir"; |
| resets = <&r_ccu RST_APB0_IR>; |
| interrupt-parent = <&r_intc>; |
| interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x01f02000 0x400>; |
| status = "disabled"; |
| }; |
| |
| r_i2c: i2c@1f02400 { |
| compatible = "allwinner,sun6i-a31-i2c"; |
| reg = <0x01f02400 0x400>; |
| interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&r_i2c_pins>; |
| clocks = <&r_ccu CLK_APB0_I2C>; |
| resets = <&r_ccu RST_APB0_I2C>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| r_pio: pinctrl@1f02c00 { |
| compatible = "allwinner,sun8i-h3-r-pinctrl"; |
| reg = <0x01f02c00 0x400>; |
| interrupt-parent = <&r_intc>; |
| interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>; |
| clock-names = "apb", "hosc", "losc"; |
| gpio-controller; |
| #gpio-cells = <3>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| |
| r_ir_rx_pin: r-ir-rx-pin { |
| pins = "PL11"; |
| function = "s_cir_rx"; |
| }; |
| |
| r_i2c_pins: r-i2c-pins { |
| pins = "PL0", "PL1"; |
| function = "s_i2c"; |
| }; |
| |
| r_pwm_pin: r-pwm-pin { |
| pins = "PL10"; |
| function = "s_pwm"; |
| }; |
| }; |
| |
| r_pwm: pwm@1f03800 { |
| compatible = "allwinner,sun8i-h3-pwm"; |
| reg = <0x01f03800 0x8>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&r_pwm_pin>; |
| clocks = <&osc24M>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| hdmi_sound: hdmi-sound { |
| compatible = "simple-audio-card"; |
| simple-audio-card,format = "i2s"; |
| simple-audio-card,name = "sun8i-h3-hdmi"; |
| simple-audio-card,mclk-fs = <128>; |
| simple-audio-card,frame-inversion; |
| status = "disabled"; |
| |
| simple-audio-card,codec { |
| sound-dai = <&hdmi>; |
| }; |
| |
| simple-audio-card,cpu { |
| sound-dai = <&i2s2>; |
| dai-tdm-slot-num = <2>; |
| dai-tdm-slot-width = <32>; |
| }; |
| }; |
| }; |
