| /* |
| * net/dsa/mv88e6xxx.c - Marvell 88e6xxx switch chip support |
| * Copyright (c) 2008 Marvell Semiconductor |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/jiffies.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/phy.h> |
| #include <net/dsa.h> |
| #include "mv88e6xxx.h" |
| |
| /* If the switch's ADDR[4:0] strap pins are strapped to zero, it will |
| * use all 32 SMI bus addresses on its SMI bus, and all switch registers |
| * will be directly accessible on some {device address,register address} |
| * pair. If the ADDR[4:0] pins are not strapped to zero, the switch |
| * will only respond to SMI transactions to that specific address, and |
| * an indirect addressing mechanism needs to be used to access its |
| * registers. |
| */ |
| static int mv88e6xxx_reg_wait_ready(struct mii_bus *bus, int sw_addr) |
| { |
| int ret; |
| int i; |
| |
| for (i = 0; i < 16; i++) { |
| ret = mdiobus_read(bus, sw_addr, 0); |
| if (ret < 0) |
| return ret; |
| |
| if ((ret & 0x8000) == 0) |
| return 0; |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg) |
| { |
| int ret; |
| |
| if (sw_addr == 0) |
| return mdiobus_read(bus, addr, reg); |
| |
| /* Wait for the bus to become free. */ |
| ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); |
| if (ret < 0) |
| return ret; |
| |
| /* Transmit the read command. */ |
| ret = mdiobus_write(bus, sw_addr, 0, 0x9800 | (addr << 5) | reg); |
| if (ret < 0) |
| return ret; |
| |
| /* Wait for the read command to complete. */ |
| ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); |
| if (ret < 0) |
| return ret; |
| |
| /* Read the data. */ |
| ret = mdiobus_read(bus, sw_addr, 1); |
| if (ret < 0) |
| return ret; |
| |
| return ret & 0xffff; |
| } |
| |
| int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg) |
| { |
| struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); |
| struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev); |
| int ret; |
| |
| if (bus == NULL) |
| return -EINVAL; |
| |
| mutex_lock(&ps->smi_mutex); |
| ret = __mv88e6xxx_reg_read(bus, ds->pd->sw_addr, addr, reg); |
| mutex_unlock(&ps->smi_mutex); |
| |
| if (ret < 0) |
| return ret; |
| |
| dev_dbg(ds->master_dev, "<- addr: 0x%.2x reg: 0x%.2x val: 0x%.4x\n", |
| addr, reg, ret); |
| |
| return ret; |
| } |
| |
| int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr, |
| int reg, u16 val) |
| { |
| int ret; |
| |
| if (sw_addr == 0) |
| return mdiobus_write(bus, addr, reg, val); |
| |
| /* Wait for the bus to become free. */ |
| ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); |
| if (ret < 0) |
| return ret; |
| |
| /* Transmit the data to write. */ |
| ret = mdiobus_write(bus, sw_addr, 1, val); |
| if (ret < 0) |
| return ret; |
| |
| /* Transmit the write command. */ |
| ret = mdiobus_write(bus, sw_addr, 0, 0x9400 | (addr << 5) | reg); |
| if (ret < 0) |
| return ret; |
| |
| /* Wait for the write command to complete. */ |
| ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val) |
| { |
| struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); |
| struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev); |
| int ret; |
| |
| if (bus == NULL) |
| return -EINVAL; |
| |
| dev_dbg(ds->master_dev, "-> addr: 0x%.2x reg: 0x%.2x val: 0x%.4x\n", |
| addr, reg, val); |
| |
| mutex_lock(&ps->smi_mutex); |
| ret = __mv88e6xxx_reg_write(bus, ds->pd->sw_addr, addr, reg, val); |
| mutex_unlock(&ps->smi_mutex); |
| |
| return ret; |
| } |
| |
| int mv88e6xxx_config_prio(struct dsa_switch *ds) |
| { |
| /* Configure the IP ToS mapping registers. */ |
| REG_WRITE(REG_GLOBAL, 0x10, 0x0000); |
| REG_WRITE(REG_GLOBAL, 0x11, 0x0000); |
| REG_WRITE(REG_GLOBAL, 0x12, 0x5555); |
| REG_WRITE(REG_GLOBAL, 0x13, 0x5555); |
| REG_WRITE(REG_GLOBAL, 0x14, 0xaaaa); |
| REG_WRITE(REG_GLOBAL, 0x15, 0xaaaa); |
| REG_WRITE(REG_GLOBAL, 0x16, 0xffff); |
| REG_WRITE(REG_GLOBAL, 0x17, 0xffff); |
| |
| /* Configure the IEEE 802.1p priority mapping register. */ |
| REG_WRITE(REG_GLOBAL, 0x18, 0xfa41); |
| |
| return 0; |
| } |
| |
| int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr) |
| { |
| REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]); |
| REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]); |
| REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]); |
| |
| return 0; |
| } |
| |
| int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr) |
| { |
| int i; |
| int ret; |
| |
| for (i = 0; i < 6; i++) { |
| int j; |
| |
| /* Write the MAC address byte. */ |
| REG_WRITE(REG_GLOBAL2, 0x0d, 0x8000 | (i << 8) | addr[i]); |
| |
| /* Wait for the write to complete. */ |
| for (j = 0; j < 16; j++) { |
| ret = REG_READ(REG_GLOBAL2, 0x0d); |
| if ((ret & 0x8000) == 0) |
| break; |
| } |
| if (j == 16) |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| int mv88e6xxx_phy_read(struct dsa_switch *ds, int addr, int regnum) |
| { |
| if (addr >= 0) |
| return mv88e6xxx_reg_read(ds, addr, regnum); |
| return 0xffff; |
| } |
| |
| int mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum, u16 val) |
| { |
| if (addr >= 0) |
| return mv88e6xxx_reg_write(ds, addr, regnum, val); |
| return 0; |
| } |
| |
| #ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU |
| static int mv88e6xxx_ppu_disable(struct dsa_switch *ds) |
| { |
| int ret; |
| unsigned long timeout; |
| |
| ret = REG_READ(REG_GLOBAL, 0x04); |
| REG_WRITE(REG_GLOBAL, 0x04, ret & ~0x4000); |
| |
| timeout = jiffies + 1 * HZ; |
| while (time_before(jiffies, timeout)) { |
| ret = REG_READ(REG_GLOBAL, 0x00); |
| usleep_range(1000, 2000); |
| if ((ret & 0xc000) != 0xc000) |
| return 0; |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int mv88e6xxx_ppu_enable(struct dsa_switch *ds) |
| { |
| int ret; |
| unsigned long timeout; |
| |
| ret = REG_READ(REG_GLOBAL, 0x04); |
| REG_WRITE(REG_GLOBAL, 0x04, ret | 0x4000); |
| |
| timeout = jiffies + 1 * HZ; |
| while (time_before(jiffies, timeout)) { |
| ret = REG_READ(REG_GLOBAL, 0x00); |
| usleep_range(1000, 2000); |
| if ((ret & 0xc000) == 0xc000) |
| return 0; |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static void mv88e6xxx_ppu_reenable_work(struct work_struct *ugly) |
| { |
| struct mv88e6xxx_priv_state *ps; |
| |
| ps = container_of(ugly, struct mv88e6xxx_priv_state, ppu_work); |
| if (mutex_trylock(&ps->ppu_mutex)) { |
| struct dsa_switch *ds = ((struct dsa_switch *)ps) - 1; |
| |
| if (mv88e6xxx_ppu_enable(ds) == 0) |
| ps->ppu_disabled = 0; |
| mutex_unlock(&ps->ppu_mutex); |
| } |
| } |
| |
| static void mv88e6xxx_ppu_reenable_timer(unsigned long _ps) |
| { |
| struct mv88e6xxx_priv_state *ps = (void *)_ps; |
| |
| schedule_work(&ps->ppu_work); |
| } |
| |
| static int mv88e6xxx_ppu_access_get(struct dsa_switch *ds) |
| { |
| struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); |
| int ret; |
| |
| mutex_lock(&ps->ppu_mutex); |
| |
| /* If the PHY polling unit is enabled, disable it so that |
| * we can access the PHY registers. If it was already |
| * disabled, cancel the timer that is going to re-enable |
| * it. |
| */ |
| if (!ps->ppu_disabled) { |
| ret = mv88e6xxx_ppu_disable(ds); |
| if (ret < 0) { |
| mutex_unlock(&ps->ppu_mutex); |
| return ret; |
| } |
| ps->ppu_disabled = 1; |
| } else { |
| del_timer(&ps->ppu_timer); |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| static void mv88e6xxx_ppu_access_put(struct dsa_switch *ds) |
| { |
| struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); |
| |
| /* Schedule a timer to re-enable the PHY polling unit. */ |
| mod_timer(&ps->ppu_timer, jiffies + msecs_to_jiffies(10)); |
| mutex_unlock(&ps->ppu_mutex); |
| } |
| |
| void mv88e6xxx_ppu_state_init(struct dsa_switch *ds) |
| { |
| struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); |
| |
| mutex_init(&ps->ppu_mutex); |
| INIT_WORK(&ps->ppu_work, mv88e6xxx_ppu_reenable_work); |
| init_timer(&ps->ppu_timer); |
| ps->ppu_timer.data = (unsigned long)ps; |
| ps->ppu_timer.function = mv88e6xxx_ppu_reenable_timer; |
| } |
| |
| int mv88e6xxx_phy_read_ppu(struct dsa_switch *ds, int addr, int regnum) |
| { |
| int ret; |
| |
| ret = mv88e6xxx_ppu_access_get(ds); |
| if (ret >= 0) { |
| ret = mv88e6xxx_reg_read(ds, addr, regnum); |
| mv88e6xxx_ppu_access_put(ds); |
| } |
| |
| return ret; |
| } |
| |
| int mv88e6xxx_phy_write_ppu(struct dsa_switch *ds, int addr, |
| int regnum, u16 val) |
| { |
| int ret; |
| |
| ret = mv88e6xxx_ppu_access_get(ds); |
| if (ret >= 0) { |
| ret = mv88e6xxx_reg_write(ds, addr, regnum, val); |
| mv88e6xxx_ppu_access_put(ds); |
| } |
| |
| return ret; |
| } |
| #endif |
| |
| void mv88e6xxx_poll_link(struct dsa_switch *ds) |
| { |
| int i; |
| |
| for (i = 0; i < DSA_MAX_PORTS; i++) { |
| struct net_device *dev; |
| int uninitialized_var(port_status); |
| int link; |
| int speed; |
| int duplex; |
| int fc; |
| |
| dev = ds->ports[i]; |
| if (dev == NULL) |
| continue; |
| |
| link = 0; |
| if (dev->flags & IFF_UP) { |
| port_status = mv88e6xxx_reg_read(ds, REG_PORT(i), 0x00); |
| if (port_status < 0) |
| continue; |
| |
| link = !!(port_status & 0x0800); |
| } |
| |
| if (!link) { |
| if (netif_carrier_ok(dev)) { |
| netdev_info(dev, "link down\n"); |
| netif_carrier_off(dev); |
| } |
| continue; |
| } |
| |
| switch (port_status & 0x0300) { |
| case 0x0000: |
| speed = 10; |
| break; |
| case 0x0100: |
| speed = 100; |
| break; |
| case 0x0200: |
| speed = 1000; |
| break; |
| default: |
| speed = -1; |
| break; |
| } |
| duplex = (port_status & 0x0400) ? 1 : 0; |
| fc = (port_status & 0x8000) ? 1 : 0; |
| |
| if (!netif_carrier_ok(dev)) { |
| netdev_info(dev, |
| "link up, %d Mb/s, %s duplex, flow control %sabled\n", |
| speed, |
| duplex ? "full" : "half", |
| fc ? "en" : "dis"); |
| netif_carrier_on(dev); |
| } |
| } |
| } |
| |
| static int mv88e6xxx_stats_wait(struct dsa_switch *ds) |
| { |
| int ret; |
| int i; |
| |
| for (i = 0; i < 10; i++) { |
| ret = REG_READ(REG_GLOBAL, 0x1d); |
| if ((ret & 0x8000) == 0) |
| return 0; |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int mv88e6xxx_stats_snapshot(struct dsa_switch *ds, int port) |
| { |
| int ret; |
| |
| /* Snapshot the hardware statistics counters for this port. */ |
| REG_WRITE(REG_GLOBAL, 0x1d, 0xdc00 | port); |
| |
| /* Wait for the snapshotting to complete. */ |
| ret = mv88e6xxx_stats_wait(ds); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void mv88e6xxx_stats_read(struct dsa_switch *ds, int stat, u32 *val) |
| { |
| u32 _val; |
| int ret; |
| |
| *val = 0; |
| |
| ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, 0x1d, 0xcc00 | stat); |
| if (ret < 0) |
| return; |
| |
| ret = mv88e6xxx_stats_wait(ds); |
| if (ret < 0) |
| return; |
| |
| ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, 0x1e); |
| if (ret < 0) |
| return; |
| |
| _val = ret << 16; |
| |
| ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, 0x1f); |
| if (ret < 0) |
| return; |
| |
| *val = _val | ret; |
| } |
| |
| void mv88e6xxx_get_strings(struct dsa_switch *ds, |
| int nr_stats, struct mv88e6xxx_hw_stat *stats, |
| int port, uint8_t *data) |
| { |
| int i; |
| |
| for (i = 0; i < nr_stats; i++) { |
| memcpy(data + i * ETH_GSTRING_LEN, |
| stats[i].string, ETH_GSTRING_LEN); |
| } |
| } |
| |
| void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds, |
| int nr_stats, struct mv88e6xxx_hw_stat *stats, |
| int port, uint64_t *data) |
| { |
| struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); |
| int ret; |
| int i; |
| |
| mutex_lock(&ps->stats_mutex); |
| |
| ret = mv88e6xxx_stats_snapshot(ds, port); |
| if (ret < 0) { |
| mutex_unlock(&ps->stats_mutex); |
| return; |
| } |
| |
| /* Read each of the counters. */ |
| for (i = 0; i < nr_stats; i++) { |
| struct mv88e6xxx_hw_stat *s = stats + i; |
| u32 low; |
| u32 high = 0; |
| |
| if (s->reg >= 0x100) { |
| int ret; |
| |
| ret = mv88e6xxx_reg_read(ds, REG_PORT(port), |
| s->reg - 0x100); |
| if (ret < 0) |
| goto error; |
| low = ret; |
| if (s->sizeof_stat == 4) { |
| ret = mv88e6xxx_reg_read(ds, REG_PORT(port), |
| s->reg - 0x100 + 1); |
| if (ret < 0) |
| goto error; |
| high = ret; |
| } |
| data[i] = (((u64)high) << 16) | low; |
| continue; |
| } |
| mv88e6xxx_stats_read(ds, s->reg, &low); |
| if (s->sizeof_stat == 8) |
| mv88e6xxx_stats_read(ds, s->reg + 1, &high); |
| |
| data[i] = (((u64)high) << 32) | low; |
| } |
| error: |
| mutex_unlock(&ps->stats_mutex); |
| } |
| |
| int mv88e6xxx_get_regs_len(struct dsa_switch *ds, int port) |
| { |
| return 32 * sizeof(u16); |
| } |
| |
| void mv88e6xxx_get_regs(struct dsa_switch *ds, int port, |
| struct ethtool_regs *regs, void *_p) |
| { |
| u16 *p = _p; |
| int i; |
| |
| regs->version = 0; |
| |
| memset(p, 0xff, 32 * sizeof(u16)); |
| |
| for (i = 0; i < 32; i++) { |
| int ret; |
| |
| ret = mv88e6xxx_reg_read(ds, REG_PORT(port), i); |
| if (ret >= 0) |
| p[i] = ret; |
| } |
| } |
| |
| #ifdef CONFIG_NET_DSA_HWMON |
| |
| int mv88e6xxx_get_temp(struct dsa_switch *ds, int *temp) |
| { |
| struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); |
| int ret; |
| int val; |
| |
| *temp = 0; |
| |
| mutex_lock(&ps->phy_mutex); |
| |
| ret = mv88e6xxx_phy_write(ds, 0x0, 0x16, 0x6); |
| if (ret < 0) |
| goto error; |
| |
| /* Enable temperature sensor */ |
| ret = mv88e6xxx_phy_read(ds, 0x0, 0x1a); |
| if (ret < 0) |
| goto error; |
| |
| ret = mv88e6xxx_phy_write(ds, 0x0, 0x1a, ret | (1 << 5)); |
| if (ret < 0) |
| goto error; |
| |
| /* Wait for temperature to stabilize */ |
| usleep_range(10000, 12000); |
| |
| val = mv88e6xxx_phy_read(ds, 0x0, 0x1a); |
| if (val < 0) { |
| ret = val; |
| goto error; |
| } |
| |
| /* Disable temperature sensor */ |
| ret = mv88e6xxx_phy_write(ds, 0x0, 0x1a, ret & ~(1 << 5)); |
| if (ret < 0) |
| goto error; |
| |
| *temp = ((val & 0x1f) - 5) * 5; |
| |
| error: |
| mv88e6xxx_phy_write(ds, 0x0, 0x16, 0x0); |
| mutex_unlock(&ps->phy_mutex); |
| return ret; |
| } |
| #endif /* CONFIG_NET_DSA_HWMON */ |
| |
| static int __init mv88e6xxx_init(void) |
| { |
| #if IS_ENABLED(CONFIG_NET_DSA_MV88E6131) |
| register_switch_driver(&mv88e6131_switch_driver); |
| #endif |
| #if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65) |
| register_switch_driver(&mv88e6123_61_65_switch_driver); |
| #endif |
| #if IS_ENABLED(CONFIG_NET_DSA_MV88E6352) |
| register_switch_driver(&mv88e6352_switch_driver); |
| #endif |
| #if IS_ENABLED(CONFIG_NET_DSA_MV88E6171) |
| register_switch_driver(&mv88e6171_switch_driver); |
| #endif |
| return 0; |
| } |
| module_init(mv88e6xxx_init); |
| |
| static void __exit mv88e6xxx_cleanup(void) |
| { |
| #if IS_ENABLED(CONFIG_NET_DSA_MV88E6171) |
| unregister_switch_driver(&mv88e6171_switch_driver); |
| #endif |
| #if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65) |
| unregister_switch_driver(&mv88e6123_61_65_switch_driver); |
| #endif |
| #if IS_ENABLED(CONFIG_NET_DSA_MV88E6131) |
| unregister_switch_driver(&mv88e6131_switch_driver); |
| #endif |
| } |
| module_exit(mv88e6xxx_cleanup); |
| |
| MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>"); |
| MODULE_DESCRIPTION("Driver for Marvell 88E6XXX ethernet switch chips"); |
| MODULE_LICENSE("GPL"); |