blob: 3a258a692757f4ffe308dde708b8e9a9dc5c8993 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
* Copyright (C) 2014 Stefan Roese <sr@denx.de>
*/
#include "omap3-tao3530.dtsi"
/ {
gpio_poweroff {
pinctrl-names = "default";
pinctrl-0 = <&poweroff_pins>;
compatible = "gpio-poweroff";
gpios = <&gpio6 8 GPIO_ACTIVE_LOW>; /* GPIO 168 */
};
};
&omap3_pmx_core {
sound2_pins: sound2-pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4) /* gpmc_d8 gpio_44 */
>;
};
led_blue_pins: led-blue-pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4) /* cam_xclka gpio_96, LED blue */
>;
};
led_green_pins: led-green-pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4) /* cam_d8 gpio_107, LED green */
>;
};
led_red_pins: led-red-pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* cam_xclkb gpio_111, LED red */
>;
};
poweroff_pins: poweroff-pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4) /* i2c2_scl gpio_168 */
>;
};
powerdown_input_pins: powerdown-input-pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4) /* i2c2_sda gpio_183 */
>;
};
fpga_boot0_pins: fpga-boot0-pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2 gpio_101 */
OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4) /* cam_d3 gpio_102 */
OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE4) /* cam_d4 gpio_103 */
OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d5 gpio_104 */
>;
};
fpga_boot1_pins: fpga-boot1-pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4) /* gpmc_d10 gpio_46 */
OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4) /* gpmc_d11 gpio_47 */
OMAP3_CORE1_IOPAD(0x20a6, PIN_OUTPUT | MUX_MODE4) /* gpmc_d12 gpio_48 */
OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_d13 gpio_49 */
>;
};
};
/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
&i2c2 {
status = "disabled";
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
};