| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2021, The Linux Foundation. All rights reserved. |
| * Copyright (c) 2022, Linaro Limited |
| */ |
| |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/spmi/spmi.h> |
| |
| &spmi_bus { |
| pmm8540a: pmic@0 { |
| compatible = "qcom,pm8150", "qcom,spmi-pmic"; |
| reg = <0x0 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmm8540a_rtc: rtc@6000 { |
| compatible = "qcom,pm8941-rtc"; |
| reg = <0x6000>, <0x6100>; |
| reg-names = "rtc", "alarm"; |
| interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; |
| wakeup-source; |
| }; |
| |
| pmm8540a_gpios: gpio@c000 { |
| compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; |
| reg = <0xc000>; |
| gpio-controller; |
| gpio-ranges = <&pmm8540a_gpios 0 0 10>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| pmm8540c: pmic@4 { |
| compatible = "qcom,pm8150", "qcom,spmi-pmic"; |
| reg = <0x4 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmm8540c_sdam_2: nvram@b110 { |
| compatible = "qcom,spmi-sdam"; |
| reg = <0xb110>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0xb110 0xb0>; |
| status = "disabled"; |
| }; |
| |
| pmm8540c_gpios: gpio@c000 { |
| compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; |
| reg = <0xc000>; |
| gpio-controller; |
| gpio-ranges = <&pmm8540c_gpios 0 0 10>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| pmm8540e: pmic@8 { |
| compatible = "qcom,pm8150", "qcom,spmi-pmic"; |
| reg = <0x8 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmm8540e_gpios: gpio@c000 { |
| compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; |
| reg = <0xc000>; |
| gpio-controller; |
| gpio-ranges = <&pmm8540e_gpios 0 0 10>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| pmm8540g: pmic@c { |
| compatible = "qcom,pm8150", "qcom,spmi-pmic"; |
| reg = <0xc SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmm8540g_gpios: gpio@c000 { |
| compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; |
| reg = <0xc000>; |
| gpio-controller; |
| gpio-ranges = <&pmm8540g_gpios 0 0 10>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| }; |
