blob: 7ef99038cb37ba44b1e7f94397e551450331ad85 [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
*/
/dts-v1/;
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
#include <dt-bindings/gpio/gpio.h>
#include "sm8250.dtsi"
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
#include "pm8150l.dtsi"
#include "pm8009.dtsi"
/ {
model = "Qualcomm Technologies, Inc. SM8250 MTP";
compatible = "qcom,sm8250-mtp", "qcom,sm8250";
chassis-type = "handset";
aliases {
serial0 = &uart12;
};
wcd938x: audio-codec {
compatible = "qcom,wcd9380-codec";
reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
vdd-buck-supply = <&vreg_s4a_1p8>;
vdd-rxtx-supply = <&vreg_s4a_1p8>;
vdd-io-supply = <&vreg_s4a_1p8>;
vdd-mic-bias-supply = <&vreg_bob>;
qcom,micbias1-microvolt = <1800000>;
qcom,micbias2-microvolt = <1800000>;
qcom,micbias3-microvolt = <1800000>;
qcom,micbias4-microvolt = <1800000>;
qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
qcom,rx-device = <&wcd_rx>;
qcom,tx-device = <&wcd_tx>;
#sound-dai-cells = <1>;
};
chosen {
stdout-path = "serial0:115200n8";
};
thermal-zones {
camera-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150l_adc_tm 0>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
conn-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150b_adc_tm 0>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
mmw-pa1-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150_adc_tm 2>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
mmw-pa2-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150l_adc_tm 2>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
skin-msm-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150l_adc_tm 1>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
skin-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150_adc_tm 1>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
xo-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150_adc_tm 0>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
};
vreg_s4a_1p8: pm8150-s4 {
compatible = "regulator-fixed";
regulator-name = "vreg_s4a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vph_pwr>;
};
vreg_s6c_0p88: smpc6-regulator {
compatible = "regulator-fixed";
regulator-name = "vreg_s6c_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-always-on;
vin-supply = <&vph_pwr>;
};
};
&adsp {
status = "okay";
firmware-name = "qcom/sm8250/adsp.mbn";
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "a";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-s9-supply = <&vph_pwr>;
vdd-s10-supply = <&vph_pwr>;
vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
vdd-l2-l10-supply = <&vreg_bob>;
vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
vdd-l6-l9-supply = <&vreg_s8c_1p3>;
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
vdd-l13-l16-l17-supply = <&vreg_bob>;
vreg_s5a_1p9: smps5 {
regulator-name = "vreg_s5a_1p9";
regulator-min-microvolt = <1904000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s6a_0p95: smps6 {
regulator-name = "vreg_s6a_0p95";
regulator-min-microvolt = <920000>;
regulator-max-microvolt = <1128000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2a_3p1: ldo2 {
regulator-name = "vreg_l2a_3p1";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3a_0p9: ldo3 {
regulator-name = "vreg_l3a_0p9";
regulator-min-microvolt = <928000>;
regulator-max-microvolt = <932000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5a_0p875: ldo5 {
regulator-name = "vreg_l5a_0p875";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6a_1p2: ldo6 {
regulator-name = "vreg_l6a_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a_1p7: ldo7 {
regulator-name = "vreg_l7a_1p7";
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9a_1p2: ldo9 {
regulator-name = "vreg_l9a_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10a_1p8: ldo10 {
regulator-name = "vreg_l10a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12a_1p8: ldo12 {
regulator-name = "vreg_l12a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13a_ts_3p0: ldo13 {
regulator-name = "vreg_l13a_ts_3p0";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14a_1p8: ldo14 {
regulator-name = "vreg_l14a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15a_11ad_io_1p8: ldo15 {
regulator-name = "vreg_l15a_11ad_io_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16a_2p7: ldo16 {
regulator-name = "vreg_l16a_2p7";
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17a_3p0: ldo17 {
regulator-name = "vreg_l17a_3p0";
regulator-min-microvolt = <2856000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l18a_0p9: ldo18 {
regulator-name = "vreg_l18a_0p9";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8150l-rpmh-regulators";
qcom,pmic-id = "c";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-l1-l8-supply = <&vreg_s4a_1p8>;
vdd-l2-l3-supply = <&vreg_s8c_1p3>;
vdd-l4-l5-l6-supply = <&vreg_bob>;
vdd-l7-l11-supply = <&vreg_bob>;
vdd-l9-l10-supply = <&vreg_bob>;
vdd-bob-supply = <&vph_pwr>;
vreg_bob: bob {
regulator-name = "vreg_bob";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <4000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
};
vreg_s8c_1p3: smps8 {
regulator-name = "vreg_s8c_1p3";
regulator-min-microvolt = <1352000>;
regulator-max-microvolt = <1352000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1c_1p8: ldo1 {
regulator-name = "vreg_l1c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c_1p2: ldo2 {
regulator-name = "vreg_l2c_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c_0p92: ldo3 {
regulator-name = "vreg_l3c_0p92";
regulator-min-microvolt = <920000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c_1p7: ldo4 {
regulator-name = "vreg_l4c_1p7";
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <2928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5c_1p8: ldo5 {
regulator-name = "vreg_l5c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c_2p9: ldo6 {
regulator-name = "vreg_l6c_2p9";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_cam_vcm0_2p85: ldo7 {
regulator-name = "vreg_l7c_cam_vcm0_2p85";
regulator-min-microvolt = <2856000>;
regulator-max-microvolt = <3104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8c_1p8: ldo8 {
regulator-name = "vreg_l8c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9c_2p9: ldo9 {
regulator-name = "vreg_l9c_2p9";
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p0: ldo10 {
regulator-name = "vreg_l10c_3p0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11c_3p3: ldo11 {
regulator-name = "vreg_l11c_3p3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-2 {
compatible = "qcom,pm8009-rpmh-regulators";
qcom,pmic-id = "f";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vreg_bob>;
vdd-l2-supply = <&vreg_s8c_1p3>;
vdd-l5-l6-supply = <&vreg_bob>;
vdd-l7-supply = <&vreg_s4a_1p8>;
vreg_l1f_cam_dvdd1_1p1: ldo1 {
regulator-name = "vreg_l1f_cam_dvdd1_1p1";
regulator-min-microvolt = <1104000>;
regulator-max-microvolt = <1104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2f_cam_dvdd0_1p2: ldo2 {
regulator-name = "vreg_l2f_cam_dvdd0_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3f_cam_dvdd2_1p05: ldo3 {
regulator-name = "vreg_l3f_cam_dvdd2_1p05";
regulator-min-microvolt = <1056000>;
regulator-max-microvolt = <1056000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5f_cam_avdd0_2p85: ldo5 {
regulator-name = "vreg_l5f_cam_avdd0_2p85";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6f_cam_avdd1_2p85: ldo6 {
regulator-name = "vreg_l6f_cam_avdd1_2p85";
regulator-min-microvolt = <2856000>;
regulator-max-microvolt = <2856000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7f_1p8: ldo7 {
regulator-name = "vreg_l7f_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
&cdsp {
status = "okay";
firmware-name = "qcom/sm8250/cdsp.mbn";
};
&gmu {
status = "okay";
};
&gpu {
status = "okay";
zap-shader {
memory-region = <&gpu_mem>;
firmware-name = "qcom/sm8250/a650_zap.mbn";
};
};
&i2c1 {
status = "okay";
clock-frequency = <1000000>;
/* NQ NFC chip @28 */
};
&i2c13 {
status = "okay";
/* st,stmfts @ 49 */
};
&i2c15 {
status = "okay";
/* smb1390 @ 10 */
/* rtc6226 @ 64 */
};
&pm8150_adc {
channel@4c {
reg = <ADC5_XO_THERM_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
label = "xo_therm";
};
channel@4d {
reg = <ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
label = "skin_therm";
};
channel@4e {
reg = <ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
label = "pa_therm1";
};
};
&pm8150_adc_tm {
status = "okay";
xo-therm@0 {
reg = <0>;
io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
skin-therm@1 {
reg = <1>;
io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
pa-therm1@2 {
reg = <2>;
io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
&pm8150b_adc {
channel@4f {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
label = "conn_therm";
};
};
&pm8150b_adc_tm {
status = "okay";
conn-therm@0 {
reg = <0>;
io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
&pm8150l_adc_tm {
status = "okay";
camera-flash-therm@0 {
reg = <0>;
io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
skin-msm-therm@1 {
reg = <1>;
io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
pa-therm2@2 {
reg = <2>;
io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
&pm8150l_adc {
channel@4d {
reg = <ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
label = "camera_flash_therm";
};
channel@4e {
reg = <ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
label = "skin_msm_therm";
};
channel@4f {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
label = "pa_therm2";
};
};
&qupv3_id_0 {
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&qupv3_id_2 {
status = "okay";
};
&rxmacro {
status = "okay";
};
&slpi {
status = "okay";
firmware-name = "qcom/sm8250/slpi.mbn";
};
&sound {
compatible = "qcom,sm8250-sndcard";
model = "SM8250-MTP-WCD9380-WSA8810-VA-DMIC";
audio-routing =
"SpkrLeft IN", "WSA_SPK1 OUT",
"SpkrRight IN", "WSA_SPK2 OUT",
"IN1_HPHL", "HPHL_OUT",
"IN2_HPHR", "HPHR_OUT",
"AMIC1", "MIC BIAS1",
"AMIC2", "MIC BIAS2",
"AMIC3", "MIC BIAS3",
"AMIC4", "MIC BIAS3",
"AMIC5", "MIC BIAS4",
"TX SWR_ADC0", "ADC1_OUTPUT",
"TX SWR_ADC1", "ADC2_OUTPUT",
"TX SWR_ADC2", "ADC3_OUTPUT",
"TX SWR_ADC3", "ADC4_OUTPUT",
"TX SWR_DMIC0", "DMIC1_OUTPUT",
"TX SWR_DMIC1", "DMIC2_OUTPUT",
"TX SWR_DMIC2", "DMIC3_OUTPUT",
"TX SWR_DMIC3", "DMIC4_OUTPUT",
"TX SWR_DMIC4", "DMIC5_OUTPUT",
"TX SWR_DMIC5", "DMIC6_OUTPUT",
"TX SWR_DMIC6", "DMIC7_OUTPUT",
"TX SWR_DMIC7", "DMIC8_OUTPUT";
mm1-dai-link {
link-name = "MultiMedia1";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
};
};
mm2-dai-link {
link-name = "MultiMedia2";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
};
};
mm3-dai-link {
link-name = "MultiMedia3";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
};
};
wcd-playback-dai-link {
link-name = "WCD Playback";
cpu {
sound-dai = <&q6afedai RX_CODEC_DMA_RX_0>;
};
codec {
sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
};
platform {
sound-dai = <&q6routing>;
};
};
wcd-capture-dai-link {
link-name = "WCD Capture";
cpu {
sound-dai = <&q6afedai TX_CODEC_DMA_TX_3>;
};
codec {
sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
};
platform {
sound-dai = <&q6routing>;
};
};
wsa-dai-link {
link-name = "WSA Playback";
cpu {
sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
};
codec {
sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
};
platform {
sound-dai = <&q6routing>;
};
};
va-dai-link {
link-name = "VA Capture";
cpu {
sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
};
platform {
sound-dai = <&q6routing>;
};
codec {
sound-dai = <&vamacro 0>;
};
};
};
&swr0 {
status = "okay";
left_spkr: speaker@0,3 {
compatible = "sdw10217211000";
reg = <0 3>;
powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
#thermal-sensor-cells = <0>;
sound-name-prefix = "SpkrLeft";
#sound-dai-cells = <0>;
};
right_spkr: speaker@0,4 {
compatible = "sdw10217211000";
reg = <0 4>;
powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_LOW>;
#thermal-sensor-cells = <0>;
sound-name-prefix = "SpkrRight";
#sound-dai-cells = <0>;
};
};
&swr1 {
status = "okay";
wcd_rx: wcd9380-rx@0,4 {
compatible = "sdw20217010d00";
reg = <0 4>;
qcom,rx-port-mapping = <1 2 3 4 5>;
};
};
&swr2 {
status = "okay";
wcd_tx: wcd9380-tx@0,3 {
compatible = "sdw20217010d00";
reg = <0 3>;
qcom,tx-port-mapping = <2 3 4 5>;
};
};
&tlmm {
gpio-reserved-ranges = <28 4>, <40 4>;
wcd938x_reset_default: wcd938x-reset-default-state {
pins = "gpio32";
function = "gpio";
drive-strength = <16>;
output-high;
};
wcd938x_reset_sleep: wcd938x-reset-sleep-state {
pins = "gpio32";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-low;
};
};
&txmacro {
status = "okay";
};
&uart12 {
status = "okay";
};
&ufs_mem_hc {
status = "okay";
vcc-supply = <&vreg_l17a_3p0>;
vcc-max-microamp = <750000>;
vccq-supply = <&vreg_l6a_1p2>;
vccq-max-microamp = <700000>;
vccq2-supply = <&vreg_s4a_1p8>;
vccq2-max-microamp = <750000>;
};
&ufs_mem_phy {
status = "okay";
vdda-phy-supply = <&vreg_l5a_0p875>;
vdda-pll-supply = <&vreg_l9a_1p2>;
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "host";
};
&usb_1_hsphy {
status = "okay";
vdda-pll-supply = <&vreg_l5a_0p875>;
vdda18-supply = <&vreg_l12a_1p8>;
vdda33-supply = <&vreg_l2a_3p1>;
};
&usb_1_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l9a_1p2>;
vdda-pll-supply = <&vreg_l18a_0p9>;
};
&usb_2 {
status = "okay";
};
&usb_2_dwc3 {
dr_mode = "host";
};
&usb_2_hsphy {
status = "okay";
vdda-pll-supply = <&vreg_l5a_0p875>;
vdda18-supply = <&vreg_l12a_1p8>;
vdda33-supply = <&vreg_l2a_3p1>;
};
&usb_2_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l9a_1p2>;
vdda-pll-supply = <&vreg_l18a_0p9>;
};
&venus {
status = "okay";
};
&wsamacro {
status = "okay";
};