| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 2019 Amlogic, Inc. All rights reserved. |
| * Author: Jian Hu <jian.hu@amlogic.com> |
| * |
| * Copyright (c) 2023, SberDevices. All Rights Reserved. |
| * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru> |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/platform_device.h> |
| #include "a1-pll.h" |
| #include "clk-regmap.h" |
| #include "meson-clkc-utils.h" |
| |
| #include <dt-bindings/clock/amlogic,a1-pll-clkc.h> |
| |
| static struct clk_regmap fixed_pll_dco = { |
| .data = &(struct meson_clk_pll_data){ |
| .en = { |
| .reg_off = ANACTRL_FIXPLL_CTRL0, |
| .shift = 28, |
| .width = 1, |
| }, |
| .m = { |
| .reg_off = ANACTRL_FIXPLL_CTRL0, |
| .shift = 0, |
| .width = 8, |
| }, |
| .n = { |
| .reg_off = ANACTRL_FIXPLL_CTRL0, |
| .shift = 10, |
| .width = 5, |
| }, |
| .frac = { |
| .reg_off = ANACTRL_FIXPLL_CTRL1, |
| .shift = 0, |
| .width = 19, |
| }, |
| .l = { |
| .reg_off = ANACTRL_FIXPLL_STS, |
| .shift = 31, |
| .width = 1, |
| }, |
| .rst = { |
| .reg_off = ANACTRL_FIXPLL_CTRL0, |
| .shift = 29, |
| .width = 1, |
| }, |
| }, |
| .hw.init = &(struct clk_init_data){ |
| .name = "fixed_pll_dco", |
| .ops = &meson_clk_pll_ro_ops, |
| .parent_data = &(const struct clk_parent_data) { |
| .fw_name = "fixpll_in", |
| }, |
| .num_parents = 1, |
| }, |
| }; |
| |
| static struct clk_regmap fixed_pll = { |
| .data = &(struct clk_regmap_gate_data){ |
| .offset = ANACTRL_FIXPLL_CTRL0, |
| .bit_idx = 20, |
| }, |
| .hw.init = &(struct clk_init_data) { |
| .name = "fixed_pll", |
| .ops = &clk_regmap_gate_ops, |
| .parent_hws = (const struct clk_hw *[]) { |
| &fixed_pll_dco.hw |
| }, |
| .num_parents = 1, |
| }, |
| }; |
| |
| static const struct pll_mult_range hifi_pll_mult_range = { |
| .min = 32, |
| .max = 64, |
| }; |
| |
| static const struct reg_sequence hifi_init_regs[] = { |
| { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x01800000 }, |
| { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 }, |
| { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x100a1100 }, |
| { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x00302000 }, |
| { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x01f18000 }, |
| }; |
| |
| static struct clk_regmap hifi_pll = { |
| .data = &(struct meson_clk_pll_data){ |
| .en = { |
| .reg_off = ANACTRL_HIFIPLL_CTRL0, |
| .shift = 28, |
| .width = 1, |
| }, |
| .m = { |
| .reg_off = ANACTRL_HIFIPLL_CTRL0, |
| .shift = 0, |
| .width = 8, |
| }, |
| .n = { |
| .reg_off = ANACTRL_HIFIPLL_CTRL0, |
| .shift = 10, |
| .width = 5, |
| }, |
| .frac = { |
| .reg_off = ANACTRL_HIFIPLL_CTRL1, |
| .shift = 0, |
| .width = 19, |
| }, |
| .l = { |
| .reg_off = ANACTRL_HIFIPLL_STS, |
| .shift = 31, |
| .width = 1, |
| }, |
| .current_en = { |
| .reg_off = ANACTRL_HIFIPLL_CTRL0, |
| .shift = 26, |
| .width = 1, |
| }, |
| .l_detect = { |
| .reg_off = ANACTRL_HIFIPLL_CTRL2, |
| .shift = 6, |
| .width = 1, |
| }, |
| .range = &hifi_pll_mult_range, |
| .init_regs = hifi_init_regs, |
| .init_count = ARRAY_SIZE(hifi_init_regs), |
| }, |
| .hw.init = &(struct clk_init_data){ |
| .name = "hifi_pll", |
| .ops = &meson_clk_pll_ops, |
| .parent_data = &(const struct clk_parent_data) { |
| .fw_name = "hifipll_in", |
| }, |
| .num_parents = 1, |
| }, |
| }; |
| |
| static struct clk_fixed_factor fclk_div2_div = { |
| .mult = 1, |
| .div = 2, |
| .hw.init = &(struct clk_init_data){ |
| .name = "fclk_div2_div", |
| .ops = &clk_fixed_factor_ops, |
| .parent_hws = (const struct clk_hw *[]) { |
| &fixed_pll.hw |
| }, |
| .num_parents = 1, |
| }, |
| }; |
| |
| static struct clk_regmap fclk_div2 = { |
| .data = &(struct clk_regmap_gate_data){ |
| .offset = ANACTRL_FIXPLL_CTRL0, |
| .bit_idx = 21, |
| }, |
| .hw.init = &(struct clk_init_data){ |
| .name = "fclk_div2", |
| .ops = &clk_regmap_gate_ops, |
| .parent_hws = (const struct clk_hw *[]) { |
| &fclk_div2_div.hw |
| }, |
| .num_parents = 1, |
| /* |
| * This clock is used by DDR clock in BL2 firmware |
| * and is required by the platform to operate correctly. |
| * Until the following condition are met, we need this clock to |
| * be marked as critical: |
| * a) Mark the clock used by a firmware resource, if possible |
| * b) CCF has a clock hand-off mechanism to make the sure the |
| * clock stays on until the proper driver comes along |
| */ |
| .flags = CLK_IS_CRITICAL, |
| }, |
| }; |
| |
| static struct clk_fixed_factor fclk_div3_div = { |
| .mult = 1, |
| .div = 3, |
| .hw.init = &(struct clk_init_data){ |
| .name = "fclk_div3_div", |
| .ops = &clk_fixed_factor_ops, |
| .parent_hws = (const struct clk_hw *[]) { |
| &fixed_pll.hw |
| }, |
| .num_parents = 1, |
| }, |
| }; |
| |
| static struct clk_regmap fclk_div3 = { |
| .data = &(struct clk_regmap_gate_data){ |
| .offset = ANACTRL_FIXPLL_CTRL0, |
| .bit_idx = 22, |
| }, |
| .hw.init = &(struct clk_init_data){ |
| .name = "fclk_div3", |
| .ops = &clk_regmap_gate_ops, |
| .parent_hws = (const struct clk_hw *[]) { |
| &fclk_div3_div.hw |
| }, |
| .num_parents = 1, |
| /* |
| * This clock is used by APB bus which is set in boot ROM code |
| * and is required by the platform to operate correctly. |
| */ |
| .flags = CLK_IS_CRITICAL, |
| }, |
| }; |
| |
| static struct clk_fixed_factor fclk_div5_div = { |
| .mult = 1, |
| .div = 5, |
| .hw.init = &(struct clk_init_data){ |
| .name = "fclk_div5_div", |
| .ops = &clk_fixed_factor_ops, |
| .parent_hws = (const struct clk_hw *[]) { |
| &fixed_pll.hw |
| }, |
| .num_parents = 1, |
| }, |
| }; |
| |
| static struct clk_regmap fclk_div5 = { |
| .data = &(struct clk_regmap_gate_data){ |
| .offset = ANACTRL_FIXPLL_CTRL0, |
| .bit_idx = 23, |
| }, |
| .hw.init = &(struct clk_init_data){ |
| .name = "fclk_div5", |
| .ops = &clk_regmap_gate_ops, |
| .parent_hws = (const struct clk_hw *[]) { |
| &fclk_div5_div.hw |
| }, |
| .num_parents = 1, |
| /* |
| * This clock is used by AXI bus which setted in Romcode |
| * and is required by the platform to operate correctly. |
| */ |
| .flags = CLK_IS_CRITICAL, |
| }, |
| }; |
| |
| static struct clk_fixed_factor fclk_div7_div = { |
| .mult = 1, |
| .div = 7, |
| .hw.init = &(struct clk_init_data){ |
| .name = "fclk_div7_div", |
| .ops = &clk_fixed_factor_ops, |
| .parent_hws = (const struct clk_hw *[]) { |
| &fixed_pll.hw |
| }, |
| .num_parents = 1, |
| }, |
| }; |
| |
| static struct clk_regmap fclk_div7 = { |
| .data = &(struct clk_regmap_gate_data){ |
| .offset = ANACTRL_FIXPLL_CTRL0, |
| .bit_idx = 24, |
| }, |
| .hw.init = &(struct clk_init_data){ |
| .name = "fclk_div7", |
| .ops = &clk_regmap_gate_ops, |
| .parent_hws = (const struct clk_hw *[]) { |
| &fclk_div7_div.hw |
| }, |
| .num_parents = 1, |
| }, |
| }; |
| |
| /* Array of all clocks registered by this provider */ |
| static struct clk_hw *a1_pll_hw_clks[] = { |
| [CLKID_FIXED_PLL_DCO] = &fixed_pll_dco.hw, |
| [CLKID_FIXED_PLL] = &fixed_pll.hw, |
| [CLKID_FCLK_DIV2_DIV] = &fclk_div2_div.hw, |
| [CLKID_FCLK_DIV3_DIV] = &fclk_div3_div.hw, |
| [CLKID_FCLK_DIV5_DIV] = &fclk_div5_div.hw, |
| [CLKID_FCLK_DIV7_DIV] = &fclk_div7_div.hw, |
| [CLKID_FCLK_DIV2] = &fclk_div2.hw, |
| [CLKID_FCLK_DIV3] = &fclk_div3.hw, |
| [CLKID_FCLK_DIV5] = &fclk_div5.hw, |
| [CLKID_FCLK_DIV7] = &fclk_div7.hw, |
| [CLKID_HIFI_PLL] = &hifi_pll.hw, |
| }; |
| |
| static struct clk_regmap *const a1_pll_regmaps[] = { |
| &fixed_pll_dco, |
| &fixed_pll, |
| &fclk_div2, |
| &fclk_div3, |
| &fclk_div5, |
| &fclk_div7, |
| &hifi_pll, |
| }; |
| |
| static struct regmap_config a1_pll_regmap_cfg = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| }; |
| |
| static struct meson_clk_hw_data a1_pll_clks = { |
| .hws = a1_pll_hw_clks, |
| .num = ARRAY_SIZE(a1_pll_hw_clks), |
| }; |
| |
| static int meson_a1_pll_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| void __iomem *base; |
| struct regmap *map; |
| int clkid, i, err; |
| |
| base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(base)) |
| return dev_err_probe(dev, PTR_ERR(base), |
| "can't ioremap resource\n"); |
| |
| map = devm_regmap_init_mmio(dev, base, &a1_pll_regmap_cfg); |
| if (IS_ERR(map)) |
| return dev_err_probe(dev, PTR_ERR(map), |
| "can't init regmap mmio region\n"); |
| |
| /* Populate regmap for the regmap backed clocks */ |
| for (i = 0; i < ARRAY_SIZE(a1_pll_regmaps); i++) |
| a1_pll_regmaps[i]->map = map; |
| |
| /* Register clocks */ |
| for (clkid = 0; clkid < a1_pll_clks.num; clkid++) { |
| err = devm_clk_hw_register(dev, a1_pll_clks.hws[clkid]); |
| if (err) |
| return dev_err_probe(dev, err, |
| "clock[%d] registration failed\n", |
| clkid); |
| } |
| |
| return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get, |
| &a1_pll_clks); |
| } |
| |
| static const struct of_device_id a1_pll_clkc_match_table[] = { |
| { .compatible = "amlogic,a1-pll-clkc", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, a1_pll_clkc_match_table); |
| |
| static struct platform_driver a1_pll_clkc_driver = { |
| .probe = meson_a1_pll_probe, |
| .driver = { |
| .name = "a1-pll-clkc", |
| .of_match_table = a1_pll_clkc_match_table, |
| }, |
| }; |
| |
| module_platform_driver(a1_pll_clkc_driver); |
| MODULE_AUTHOR("Jian Hu <jian.hu@amlogic.com>"); |
| MODULE_AUTHOR("Dmitry Rokosov <ddrokosov@sberdevices.ru>"); |
| MODULE_LICENSE("GPL"); |
